Introduction: This study explores whether modern magnetic resonance imaging (MRI) with improved cartilage sequencing is able to show a more detailed view of antero-medial osteoarthritis of the knee (AMOA) than previously, so enabling a radiographic description of this common phenotype of disease. Modern MRI technology allows us to visualize in great detail the structures and cartilage within the knee, providing a better understanding of the pathoanatomy of AMOA. This description of the end stage of disease is useful as a baseline when investigating the progression of arthritis through the knee. Preoperative assessment of patients and selection of intervention is very important and preoperative imaging forms an integral part of this. This will also be useful in preoperative assessment and surgical management of patients.

Methods: 50 patients with a radiographic diagnosis of anteromedial osteoarthritis of the knee and had been listed for unicompartmental knee arthroplasty (UKA) had MRI as part of their pre-op workup. At operation all were deemed suitable for UKA using the current Oxford indications. The image sequences were coronal, axial and sagittal with a predetermined cartilage protocol. The state of the ACL, cartilage wear degree and location, presence and pattern of osteophytes, meniscal anatomy and subchondral high signal were assessed.

Results: All the ACLs were visualized and in continuity, however 40% showed intrasubstance high signal. 100% of medial compartments showed full thickness anteromedial loss with preservation of the posteromedial cartilage. When present, the meniscus was extruded in 75% of cases.

90% of lateral compartments were normal and none had full thickness cartilage loss. However 10% showed high signal in the tibial plateau. There was a highly reproducible pattern of osteophyte formation; 94% posteromedial and posterolateral aspect of medial femoral condyle; 90% medial tibial; 80% medial femoral and 84% lateral intercondylar notch.

Discussion: This study maps the pattern of anteromedial osteoarthritis using modern MRI techniques. This creates a baseline description of disease which is useful when investigating disease progression. This also has importance in determining preoperative indications (preservation of ACL and posteromedial cartilage); surgical technique (determine pattern of osteophytes requiring resection) and potentially important for long-term outcome (early lateral compartment changes).

Our aim was to investigate the molecular features of progressive severities of cartilage damage, within the phenotype of Anteromedial Gonarthrosis (AMG).

Ten medial tibial plateau specimens were collected from patients undergoing unicompartmental knee replacements. The cartilage within the area of macroscopic damage was divided into equal thirds: T1(most damaged), to T3 (least damaged). The area of macroscopically undamaged cartilage was taken as a 4th sample, N. The specimens were prepared for histological (Safranin-O and H& E staining) and immunohistochemical analysis (Type I and II Collagen, proliferation and apoptosis). Immunoassays were undertaken for Collagens I and II and GAG content. Real time PCR compared gene expression between areas T and N.

There was a decrease in OARSI grade across the four areas, with progressively less fibrillation between areas T1, T2 and T3. Area N had an OARSI grade of 0 (normal). The GAG immunoassay showed decreased levels with increasing severity of cartilage damage (p< 0.0001). There was no significant difference in the Collagen II content or gene expression between areas. The Collagen I immunohistochemistry showed increased staining within chondrocyte pericellular areas in the undamaged region (N) and immunoassays showed that the Collagen I content of this macroscopically and histologically normal cartilage, was significantly higher than the damaged areas (p< 0.0001). Furthermore, real time PCR showed a significant increase in Collagen I expression in the macroscopically normal areas compared to the damaged areas (p=0.04).

In AMG there are distinct areas, demonstrating progressive cartilage loss. We conclude that in this phenotype the Collagen I increase, in areas of macroscopically and histologically normal cartilage, may represent very early changes of the cartilage matrix within the osteoarthritic disease process. This may be able to be used as an assay of early disease and as a therapeutic target for disease modification or treatment.

Introduction: Despite a resurgence in cobalt-chromium metal-on-metal arthroplasty and hip resurfacing, the potential toxicity of cobalt ions in the periprosthetic area remains a cause for concern. Cytotoxic effects have been demonstrated in macrophages with cobalt ions inducing apoptosis and TNF-α secretion. A similar cytotoxic effect has been demonstrated in osteoblast-like cells. However, these studies assessed the acute cellular response to cobalt ions over 48 hours. To date, the effect on osteoblasts of chronic exposure to cobalt ions is unknown.

Aim: In this study we investigated the effect on osteoblasts of chronic exposure to cobalt ions. Specifically we investigated the chemokine response and effect on osteoblast function. We also investigated for a change in osteoblast phenotype to a less differentiated mesenchymal cell type.

Methods. Primary human osteoblasts were cultured and treated with cobalt (10ppm) over 21 days. Secreted chemokines (IL-8, MCP-1, TNF-α) were assayed using enzyme-linked immunosorbent assays (ELISA). Osteoblast function was assessed via alkaline phosphatase activity and calcium deposition. For a change in osteoblast phenotype, osteoblast gene expression was assessed using real time PCR. Immunoflourescent cell staining of actin filaments was used to examine for a change in osteoblast morphology.

Results: Chemokine (IL-8) secretion by osteoblasts was significantly increased after 7 days of stimulation with cobalt ions. In parallel with this, osteoblast function was also significantly inhibited as demonstrated by reduced alkaline phosphatase activity and calcium deposition. Regarding osteoblast phenotype, FSP-1, CTGF and TGF-β gene expression were upregulated after 7 days exposure indicating a transition in osteoblast phenotype to a less differentiated mesenchymal cell type. Immunoflourescent staining of actin filaments also showed a change in osteoblast morphology. Taken together, these data demonstrate cobalt ions induce a change in the osteoblast phenotype to that of a mesenchymal cell type. This is the first study to investigate osteoblast plasticity in the context of periprosthetic osteolysis.

Conclusion: After prolonged exposure to cobalt ions, IL-8 chemokine secretion is increased which attracts neutrophils to the periprosthetic area. Furthermore, osteoblasts no longer function as osteogenic cells as demonstrated by a decrease in osteoblast alkaline phosphatase activity and calcium deposition. Instead, they undergo transition to a mesenchymal cell type as demonstrated by an increase in the expression of genes associated with a mesenchymal cell lineage. Instead of secreting osteoid matrix the new cell type secretes unmineralized collagen. Cobalt ions are not benign and may play an important role in periprosthetic osteolysis by inducing osteoblasts to undergo transition to a less differentiated mesenchymal cell type.

Introduction: Femoroacetabular impingement (FAI) is an important cause of hip pain in young adults and a precursor to osteoarthritis. Morphological abnormality of either the acetabulum, proximal femur, or both, may result in FAI. The majority of patients however, have a cam deformity of the proximal femur. From a research perspective, FAI is an example of how subtle morphological abnormality results in a predictable pattern of cartilage damage, and thereby offers great potential as a model to study early degenerative disease and for clinical trials of joint preserving treatments. Accurate classification of the morphology of the hip is essential for this further study.

The aim of this study was to define normal, borderline, and abnormal parameters for the morphology of the proximal femur, in the context of the cam deformity, by studying asymptomatic individuals with normal clinical examination and no osteoarthritis from the general population.

Methods: 157 individuals (79 male, 78 female, mean age 46 years) with no previous history of hip problems were recruited. The participants were the spouses/partners of patients involved in a cohort study of osteoarthritis and FAI. All participants underwent clinical (interview, examination, and hip scores) and radiological assessment (standardised AP Pelvic and cross-table lateral radiographs of each hip). Radiographs were scored for the presence of osteoarthritis, and the morphology of the proximal femur was analysed. The alpha angle, anterior offset ratio, presence of a cam ‘bump’, synovial herniation pit were recorded in each hip.

Results: 21 subjects were excluded because they either had positive clinical features or radiological evidence of osteoarthritis (equivalent to a Kellgren and Lawrence grade of 2). From the remaining 136 subjects, with essentially ‘normal hips from the general population’, mean values for the alpha angle and anterior offset ratio were generated. Borderline and Abnormal values are suggested. Gender differences were noted with higher mean alpha angles and lower offset ratios occurring in men.

Discussion: Although it has limitations, standardised plain radiography remains the cheapest and most convenient way to screen an individual for the presence of a cam deformity. Despite the recent interest in FAI, our knowledge of what is normal in the general population, as assessed using appropriate radiographic techniques, is modest. The ranges provided by this study will facilitate the accurate classification of subjects with FAI, thereby providing guidance for surgeons treating such patients, and also enable the generation of refined cohorts for the study of the natural history of subtle morphological abnormalities of the hip, and for enrolment in clinical trials.

Despite the satisfactory short-term implant survivor-ship, there is an increasing concern that the metal-on-metal hip resurfacing arthroplasty (MoMHRA) release large amount of very small wear particles and metal ions. The periprosthetic soft-tissue masses such as pseudotumours are being increasingly reported. These were found be locally destructive, requiring revision surgery in most patients. It has been suggested that either an immune reaction or cytotoxic effect of chromium(Cr) or cobalt(Co) may play a role in its aetiology. However, the effect of the phagocytosis of implant-associated metal nanoparticles on macrophages has not been elucidated. The aim of this study was to investigate the in vitro viability and proliferative response of murine macrophages to clinically relevant metal nanoparticles and ions.

Materials and Methods: The RAW 264.7 murine macrophage cell line was cultured in MEM at a seeding density of 10E5 cells/cm2. Culture was set up in the presence of either:(1) negative control: medium alone;(2)Cobalt sulphate heptahyrate and chromium chloride hexahydrate (Sigma) at concentrations of 1uM, 10uM, 100uM;(3)Metal nanoparticles sized 30–35nm (American Elements) of cobalt, chromium and titanium at concentrations from 10E7 to 10E14 particles/ml.

At the end of day 1 and 4, two methods were used to quantify cell proliferation and viability. The AlamarBlue assay(Invitrogen) incorporates a fluorimetric growth indicator and the fluorescence signal correlates with metabolic activity of the cells. LIVE/DEAD stain kit(Molecular Probes) contains two fluorescent dyes to stain living cells green and dead cells red. The viability was calculated by the number of live cells divided by total cell numbers. Inter-group comparisons were performed using one-way ANOVA with Tukey post hoc test. Differences at p< 0.05 were considered to be significant.

Results: Compared with control, Alamar blue assay showed inhibition of cell proliferation in all three metal particles (p< 0.05). The Live/Dead staining showed Co nanoparticles were cytotoxic to most of cells Day 1 and Day 4 at 10E11/mL. At 10E13/mL, the Cr group showed cytotoxicity at day 4 (p< 0.05). There was no difference between Ti and control group. The Co2+ and Cr3+ ions led to inhibition to cell proliferation. At 10uM concentration, Co2+ caused a dramatic decrease in cell number. Live/Dead staining showed that Co2+ were toxic to cells (p< 0.05). Cr3+ group showed cytotoxicity at Day 4 (p< 0.05).

Discussion: This study demonstrates that Co and Cr nanoparticles and ions have dose-dependent proliferation and cytotoxic effects on the macrophages in vitro. The cytotoxicity occurred at the high concentration range that is found in the hip aspirates of MoMHRA patients with pseudotumours. This suggests the formation of pseudotumour may be the local sequelae of cytotoxicity due to increased production of metal wear nanoparticles.

Background: The success of the increasing number of arthroplasty, spinal instrumentation and other implanted orthopaedic devices is hampered by device-related infections. More than half of these infections are caused by staphylococcal biofilm mediated antibiotic resistance. The hope of preventing prosthetic joint infection by antibiotic loaded cement is threatened by emerging resistant organisms. No bacterial resistance to betadine has been reported.

Current intervention strategy is focussed on prevention of initial device colonisation and inhibition of genes encoding biofilm formation.

Aim:

Determine the minimum inhibitory concentration (MIC) of betadine.

Methods: MIC of betadine for both reference strains and strains isolated from infected orthopaedic implants was determined. Biofilm assay was performed at different betadine concentrations using 96-well polystyrene plates.

Total RNA for cDNA synthesis was isolated from bacterial at different twofold dilutions of betadine concentrations.

Real time polymerase chain reaction was used to quantify effects of betadine on gene expression pattern of the icaADBC operon using the constitutively expressed gyrB gene as internal control.

Bacterial was cultivated on polystyrene plates coated with different sub-inhibitory and clinical in-use doses of betadine to assess surface adherence.

Results: The MIC of betadine was 1.4% for all bacterial strains. Clinical in-use doses of betadine prevented biofilm formation.

A step-wise reduction of biofilm was observed at increasing sub-inhibitory doses of betadine (p< 0.0001).

IcaA expression correlated with biofilm formation in staphylococcal organisms. Decrease in icaA expression was strongly associated with an increase in expression in the biofilm repressor gene, icaR.

The repressive effect of betadine on biofilm formation by Staphylococcal bacteria is by a separate mechanism from its bacteriostatic mechanism of action.

Conclusion: This study shows that icaR is a potential therapeutic target through which the ability of Staphylococcal bacterial to form biofilm may be reduced. Sub-inhibitory dose of betadine inhibited biofilm formation.

Prevention of bacterial surface attachment as demonstrated by this study is suggestive that these compounds could be developed as a surface coating agents for orthopaedic implants.

Recently, a series of locally destructive soft tissue pseudotumour has been reported in patients following metal-on-metal hip resurfacing arthroplasty (MoMHRA), requiring revision surgery in a high percentage of patients. Based on the histological evidence of lymphocytic infiltration, a delayed hypersensitivity reaction to nickel (Ni), chromium (Cr) or cobalt (Co) has been suggested to play a role in its aetiology. The aim of this study was to investigate the incidence and level of hypersensitivity reaction to metals in patients with pseudotumour.

Materials and Methods: 25 patients were investigated in this Ethics approved study:

Group 1: MoMHRA patients with pseudotumours, detected on the ultrasound and confirmed with MRI (n=6, 5 F:1 M, mean age 53 years);

Lymphocyte transformation tests (LTT) were used to measure lymphocyte proliferation responses to metals. Peripheral blood mononuclear cells were isolated from heparinized blood samples using standard Ficoll–Hypaque® (Pharmacia). The PBMC were cultured at a cell density of 106 cells/mL. Culture was set up in the presence of either:

medium alone;

After 5 days of culture, cells were pulsed with [3H]-thymidine and proliferation was assessed by scintillation counting. The stimulation index (SI) was calculated by the ratio of mean counts per minute of stimulated to unstimulated cultures. A SI value of greater than 2.0 was interpreted as a positive result.

Results: A clinical history of metal allergy was reported in 2/6 in Group 1, 2/13 in Group 2, and none in Group 3. In pseudotumour group, the incidence of reactivity to Ni, Co and Cr was 60%, 17% and 0%, respectively. Within Group 2, the reactivity to Ni, Co and Cr was 69%, 8% and 15%, respectively. One control subject had reactivity to Ni. Inter-group comparisons of mean SI values (Kruskal-Wallis non-parametric analysis of variance) showed no significant differences (p> 0.05).

Discussion: The incidence of enhanced lymphocyte response to metals in patients with MoMHRA was more common than the control group. However, in comparison with non-pseudotumour patients, there was no significant difference in the incidence or the level of lymphocyte reactivity in patients with pseudotumour. We conclude that patients with MoMHRA have an enhanced lymphocyte response to metal ions, reflecting exposure and immune reactivity. However, patients with pseudotumours have a similar proliferative response to those without pseudotumours, which suggests that type IV hypersensitivity may not be the cause of the pseudotumours.

Tribological studies of hip arthroplasty suggest that larger diameter metal-on-metal (MOM) articulations would produce less wear than smaller diameter articulations. Other advantages using these large femoral heads implants include better stability with lower dislocation rates and improved range of motion. The aim of the present study was to compare chromium (Cr), cobalt (Co) and titanium (Ti) ion concentrations up to 1-year after implantation of different large diameter MOM total hip arthroplasty (THA).

Methods: Cr, Co and Ti concentrations were measured using a high resolution mass spectrometer (HR-ICP-MS) by an independent laboratory in 110 patients, randomized to receive a large metal-on-metal articulation unce-mented Ti THA from one of the following companies: Zimmer, Smith & Nephew, Biomet or Depuy. Samples of whole blood were collected pre-operatively, and postoperatively at six months and one year.

Summary of Results: At 6 months, whole blood cobalt levels were: (table removed)

Statistical group comparison revealed significant difference for Cr (p=0.006), Co (p=0.047) and Ti (p=< 0.001). With Biomet implants presenting the best results for Cr and Co and Zimmer the highest Ti level.

Discussion: Different implant factors may influence measured metal ion level in whole blood: articular surface wear and implant passive corrosion. Bearing wear may be related to its diameter, quality of the surface finish, component sphericity, radial clearance, manufacturing process (forged vs cast metal) and metal carbon content. Biomet articulation seems to present the best factors selection. Passive corrosion of exposed metallic surfaces is represented by the elevated Ti levels found in all tested systems (Ti was not part of the bearing surfaces). The plasma sprayed acetabular component surface of the Zimmer’s component seems to be responsible for the significant difference in Ti versus the other implants.

Metal on Metal Hip Resurfacing Arthroplasty (MoMHRA) has gained popularity due to its perceived advantages of bone conservation and relative ease of revision to a conventional THR if it fails. Known MoMHRA-associated complications include femoral neck fracture, avascular necrosis/collapse of the femoral head/neck, aseptic loosening and soft tissue responses such as ALVAL and pseudotumours. This study’s aim was to assess the functional outcome of failed MoMHRA revised to THR and compare it with a matched cohort of primary THRs.

Method: We have revised 53 MoMHRA cases to THR; the reasons for revision were femoral neck fracture (Fracture Group, n=21), soft tissue reaction (Pseudotumour Group, n=16) and other causes (Other Group, n=16: loosening, AVN and infection). Average followup was 2.9 years. These MoMHRA revisions were compared with 103 matched controls from a primary THR cohort; matched for age, gender and length of followup. We compared, using the MannWhitney U test, operative time (OT, measured in minutes), and Oxford Hip Score (OHS) between the revised MoMHRA groups and their individual controls. We also compared, using the Kruskal Wallis test, UCLA Activity Score in the revised MoMHRA groups.

Results: There were no differences between the Fracture Group (mean OT 99.6, SD: 30.4; mean OHS 19.8, SD:9.2) and its controls (mean OT 95.9, SD: 31.8; mean OHS 17.3, SD: 7.5) nor between the Other Group (mean OT 129.4, SD: 36.7; mean OHS 22.2, SD: 9.4) and its controls (mean OT 104.4, SD: 39.2; mean OHS 20.3, SD: 10.1) in terms of OT and OHS. The Pseudotumour Group had significantly longer OT (mean 161.6, SD: 24.5, p< 0.001) and worse outcome (mean OHS 39.1, SD: 9.3, p< 0.001) than its controls (mean OT 113.1, SD: 51.7; mean OHS 20.0, SD: 9.2). In the Fracture Group, there were 3 infections requiring revisions. For the Pseudotumour Group, there were 3 recurrent dislocations, 1 femoral artery stenosis and 3 femoral nerve palsies. In the Other Group, there were 2 periprosthetic fractures. There was significant difference (p< 0.001) in UCLA scores between the MoMHRA groups. The Pseudotumour Group had the lowest mean UCLA score of 3.8 (SD: 1.89). The Fracture Group (mean: 7.0, S.D. 2.0) and the Other Group (mean: 6.7, S.D. 2.1) had similar UCLA scores.

Discussion: The results demonstrate that outcome after revision of MoMHRA is dependent upon the indication for revision. Patients revised for soft tissue reactions had significantly worse outcome. Patients with soft tissue reactions are more likely to experience complications and require further surgical intervention. The pseudotumour associated revisions were associated with a significantly prolonged OT. The overall complication rate for the study groups was quite high, with 11 (21%) revised MoMHRA cases experiencing a complication. The Pseudotumour Group had a higher complication rate (37%).

Introduction: Femoroacetabular impingement (FAI) is an important cause of hip pain in young adults and a precursor to osteoarthritis. Genetic factors are important in the aetiology of osteoarthritis of the hip. From a research perspective, FAI is an example of how subtle morphological abnormality results in a predictable pattern of cartilage damage, and thereby offers great potential as a model to study early degenerative disease.

Although many causes of FAI are described, the vast majority of patients give no history of previous hip disease. The purpose of this study was to investigate the extent to which FAI has an underlying genetic basis, by studying the siblings of patients undergoing surgery for FAI and comparing them with controls.

Methods: 66 patients (probands, 29 male, 37 female, mean age 39.1 years) treated surgically for FAI provided siblings for the study. These patients were classified as having cam, pincer or mixed FAI. 101 siblings (55 male, 56 female, mean age 38.2 years) were recruited. The control group consisted of the 77 partners of those siblings (40 male, 37 female, mean age 41.9 years). All subjects underwent clinical (interview, examination, and hip scores) and radiological assessment (standardised AP Pelvic and cross-table lateral radiographs of each hip). Radiographs were scored for the presence of osteoarthritis, and cam- and pincer-type abnormalities.

Results: Participants were classified as a) Normal morphology with no clinical features, b) Abnormal morphology but no clinical features c) Abnormal morphology with clinical signs but no symptoms, and d) Abnormal morphology with symptoms and signs. The sibling relative risks were significant for groups b, c, and d, supporting the hypothesis of an underlying genetic predisposition to FAI. Siblings usually demonstrated the same type of abnormal morphology as the proband. Gender specificity was apparent however, with pincer abnormalities which were usually apparent in female probands being common in sisters but less common in brothers. The brothers of probands with cam deformities almost universally demonstrated the same deformity, although only 50% of sisters did so.

Discussion: Genetic influences are important in the aetiology of FAI. Whether the morphological abnormality is determined at conception or by an inherited predisposition to an acquired event during maturity warrants further study. We have identified a spectrum of disease with a proportion of siblings with abnormal morphology currently asymptomatic. These cohorts present an opportunity to prospectively study the natural history of the condition, improve our understanding of the mechanisms and pathology in early degenerative disease, and potentially to be recruited into clinical trials of surgical and adjuvant treatments.

Introduction: Most unicompartmental knee replacements (UKRs) employ cement for fixation of the prosthetic components to the bone. The information in the literature about the relative merits of cemented and cementless UKR is contradictory, with some favouring cementless fixation while others favouring cemented fixation. There is concern about the radiolucency which frequently develops around the tibial component with cemented fixations. The exact cause of the occurrence of radiolucency is unknown but according to some, it may suggest suboptimal fixation.

Method: Following ethical approval, 62 patients with medial OA were randomised to receive either cemented (n=31) or cementless components (n=31). All patients underwent identical surgical procedure with either a cemented or cementless Oxford UKR. Patients were assessed clinically and radiologically. The x-rays were taken with an image intensifier (I.I.). The position of the I.I. was adjusted until it was perfectly aligned with the tibial bone-implant interface thereby allowing accurate assessment of presence and extent of the radiolucency.

Results: The patients in the two groups were well matched. There was no significant difference in the clinical scores between the two groups. The mean OKS for the cemented group was 40 (± 8.3) and 42 (± 4.6) for cementless group. Narrow radiolucent lines were seen at the bone-implant interfaces of 75% of the cemented tibial components; partial in 43% and complete in 32%. In the cementless implants, partial radiolucencies were seen in 7% and complete radiolucencies in none. The differences are statistically highly significant (p< 0.0001) and imply satisfactory bone ingrowth into the cementless implants.

Conclusions: The method of fixation influences the incidence of radiolucency. With identical designs, no patient with cementless components developed any complete radiolucency. The observation raises the question as to whether cementless rather than cemented components should be routinely used for UKR.

Patello-femoral instability (PFI) affects 40 individuals per 100,000 population and causes significant morbidity. The causes of patello-femoral instability are multi-factorial, and an isolated anatomical abnormality does not necessarily indicate instability. Patello-femoral subluxation ranges from 0% (stable patella tracking) to 100% (dislocation) and there is an established relationship between the amount of subluxation and anterior knee pain. Traditionally, magnetic resonance (MR) imaging and standard radiographs are used to guide the clinician towards a suitable corrective procedure for PFI. The multi-factorial nature of patello-femoral instability is not addressed with current imaging techniques. This study aims to address which anatomical variables assessed on MR images are most relevant to patello-femoral subluxation. This information will aid surgical decision making, particularly in selecting the most appropriate reconstructive surgery.

A retrospective analysis of MR studies of 60 patients with suspected patello-femoral instability was performed. All patients were graded for degree of subluxation using a dynamic MR scan.

The patient scans were assessed for the presence of a specific range of anatomical variables:

patella alta, (modified Insall-Salvatti)

The Wilk’s Lambda test for multi-variate analysis was used to establish whether any relationship was present between the degree of patello-femoral instability and bony or soft tissue anatomical variables. Non-parametric statistical tests were applied across the groups and within the groups to assess their relative significance.

The following variables showed a significant relationship with patellofemoral subluxation; distance of the VMO from the patella (< 0.001), TTD (< 0.001), patella engagement (0.001), sulcus angles (0.004) and patella alta (0.005).

This study agrees with previous work showing a significant correlation between subluxation and trochlea sulcus angle and TTD.

This is the first study to establish a significant correlation between patella engagement and radiological instability. The lower the percentage engagement of the patella in the trochlea, the greater the degree of patello-femoral instability. Patella engagement showed a more significant relationship with subluxation than patella alta.

We report a new method of predicting patello-femoral instability by measuring the overlap of the patella in the trochlea groove.

Introduction: Femoroacetabular impingement (FAI) causes pain in young adults and osteoarthritis. Genetic factors are important in the aetiology of osteoarthritis. We aimed to investigate the extent to which FAI has an underlying genetic basis, by studying the siblings of patients undergoing surgery for FAI and comparing them with controls.

Methods: 66 patients (probands, 29 male, 37 female, mean age 39.1 years) treated surgically for FAI provided siblings for the study. Probands were classified as having cam, pincer or mixed FAI. 101 siblings (55 male, 56 female, mean age 38.2 years) were recruited. The control group consisted of their 77 partners and was age and gender-matched. All subjects were assessed clinically and radiologically (standardised AP Pelvic and cross-table lateral radiographs of each hip). Radiographs were scored for the presence of osteoarthritis, and morphological abnormalities.

Participants were classified as:

Normal morphology, no clinical features

Results: The sibling relative risks were significant for groups b, c, and d (ranging between 2–5, p< 0.01). Pro-bands and siblings shared the same pattern of abnormal morphology. Gender specificity was apparent: pincer abnormalities common in sisters but not in brothers. The brothers of probands with cam deformities almost universally demonstrated the same deformity, but only 50% of sisters did.

Discussion: Genetic influences are important in the aetiology of FAI. Whether the morphological abnormality is determined at conception or by an inherited predisposition to an acquired event during development warrants further study. Symptoms are variable, indicating a spectrum of disease progression. These cohorts present an opportunity to prospectively study the natural history of the condition, improve understanding of the mechanisms and pathology, and potentially to be recruited into clinical trials.

Purpose: The purpose of this study was to report the mid-term survival results of Oxford UKAs in patients of 50 years of age or less, using (1) revision surgery and (2) Oxford Knee Scores (OKS) as outcome measures.

Method: A literature review identified studies of Oxford mobile bearing UKAs containing individuals 1) 50 years old or less with 2) medial osteoarthritis and 3) 2 years or longer follow-up. Authors were approached to participate in a multi-centre survival analysis by submitting all their patients, 50 years of age or less, who received a medial UKA for osteoarthritis. Patients who had died, been lost to follow-up or who underwent revision were identified. OKS were established for all patients with surviving implants.

Results: Seven centres submitted 107 patients. The mean age was 47 years (range 32–50). The average follow-up was 4 years (range 1–25). Forty-seven patients had follow-up into their fifth year or longer. The cumulative 7-year survival using revision as the endpoint was 96% (CI 8). The mean post-operative OKS for surviving implants was 38 (CI 2) out of a possible 48.

Conclusion: While early survival rates and function are encouraging, long-term follow-up is required before concluding UKA is a viable treatment option in young patients with unicompartmental knee arthritis.

Introduction: Metal on metal Hip Resurfacing Arthroplasty (MoMHRA) has gained popularity due to its perceived advantages of bone conservation and relative ease of revision to a conventional THR if it fails. This retrospective study is aimed at assessing the functional outcome of failed MoMHRA revised to THR and comparing it with a matched cohort of primary THRs.

Method: Since 1999 we have revised 53 MoMHRA to THR. The reasons for revision were femoral neck fracture (Group A, n=21), pseudotumour (Group B, n=16) and other causes (Group C, n=16: loosening, avascular necrosis and infection). Average follow-up was 3 years months (1.2–7.3). These revisions were compared with 106 primary THRs which were age, gender and follow-up matched with the revision group in a ratio of 2:1.

Results: The mean Oxford Hip Score (OHS) was 20.1 (12–51) for group A, 39.1 (14– 56) for group B, 22.8 (12–39) for group C and 17.8 (12–45) for primary THR group. In group A, there were three infections requiring further revisions. In group B, there were three recurrent dislocations, three patients with femoral nerve palsy and one femoral artery stenosis. In group C, there were no complications. The differences in clinical and functional outcome between group B and the remaining groups as well as the difference in the outcome between group B and control group were statistically significant (p < 0.05).

Conclusions: THR for failed MoMHRA was associated with significantly more complications, operation time and need for blood transfusion for the pseudotumour group. In addition, the revisions secondary to pseudotumour also had significantly worse functional outcome when compared to other MoMHRA revisions or primary THR.

Introduction: We investigated the relationship between psychological distress and outcome after total hip replacement (THR) in the Exeter Primary Outcome Study (EPOS).

Materials & Methods: Data were collected from a number of centres across England between January 1999 and January 2002 for patients undergoing primary hip replacement using the cemented Exeter femoral component (Stryker). We recorded the Oxford Hip Score (OHS) for physical function and SF36 questionnaire for both physical and mental domain assessment annually for five years. We dichotomised the patients into the mentally distressed (MHS < 50) and the not mentally distressed (MHS ≥ 50) groups based on their pre-operative Mental Health Score (MHS) from the SF36 score.

Results: Complete data were available for 455 (407 not distressed and 48 distressed) patients. Pre-operative OHS and SF-36 score was significantly worse in the distressed group (both p< 0.001). Mean OHS improved from 43 to 20 at 1 year after surgery and remained the same thereafter in the non distressed group. In the mentally distressed group pre-operative mean OHS of 48 improved to 22 at 1 year after surgery. Maximum improvement in OHS occurred in the 1st yr after surgery. Mean MHS improved from 76 to 81 at 1 year after surgery and remained the same thereafter in the non distressed group. Mean MHS improved from 35 to 62 at 1 year after surgery, reaching 65 at 5 years after surgery in the mentally distressed group. The maximum improvement in MHS occurred in the 1st yr after surgery.

Conclusion: Pre-operative psychological distress did not compromise functional outcome after hip arthroplasty. There was a substantial improvement in mental distress in patients with mental distress prior to surgery. Both groups of patients experienced improvement in Oxford Hip Score, which was maximal by 1 year after surgery and was maintained over the 5 year follow up.

Introduction: Despite the satisfactory short-term implant survivorship of MoM hip resurfacing arthroplasty, symptomatic abnormal periprosthetic soft-tissue masses relating to the hip joint, ‘pseudotumours’, are being increasingly reported. These were found be locally destructive, requiring revision surgery in 75% of patients. Asymptomatic pseudotumours have not been previously investigated.

Methods: The aims were: (1) to investigate the prevalence of asymptomatic pseudotumours; and (2) to investigate their potential association with the level of metal ions. A total of 160 hips in 123 patients with a mean age 56 years (range 33–73) were evaluated at a mean follow-up of 61 months (range 13–88). Radiographs and OHS were assessed. Patients with a cystic or solid mass detected on the ultrasound/MRI had an aspiration or biopsy performed. Cobalt and chromium levels were analysed using Inductively-Coupled Plasma Spectrometer.

Results: Pseudotumours were found in 6 patients (5F: 1M). In 80% of bilateral cases, it was found in both sides. Histological examination showed extensive necrosis and diffuse lymphocyte infiltration. The presence of pseudotumour was associated with higher serum cobalt (9.2 μg/L vs. 1.9μg/L, p< 0.001) and chromium levels (12.0μg/L vs. 2.1μg/L, p< 0.001); higher hip aspirate cobalt (1182 μg/L vs. 86.2μg/L, p=0.003) and chromium levels (883μg/L vs. 114.8μg/L, p=0.006); and with inferior OHS (23 vs. 14 p=0.08).

Discussion: The prevalence of asymptomatic pseudotumour (5%) was higher than previously reported for the symptomatic pseudotumours (1%). There was a sixfold elevation of serum and a twelve-fold elevation of hip aspirate levels of cobalt and chromium in patients with pseudotumours. This suggests that pseudotumours may be a biological consequence of the large amount of metal debris generated in vivo. The association between pseudotumour and elevated metal ion levels might theoretically be explained by either systemic hypersensitivity responses to metal ions or local cytotoxic effects due to a high level of metal ions.

Introduction: This study explores whether modern magnetic resonance imaging (MRI) with improved cartilage sequencing is able to show a more detailed view of anteromedial osteoarthritis of the knee (AMOA). Preoperative assessment of patients and selection of intervention is very important and preoperative imaging forms an integral part of this. Modern MRI technology may allow us to visualize in great detail the structures and cartilage within the knee, providing a better understanding of the pathoanatomy of AMOA. This will be useful in preoperative assessment and surgical management of patients.

Methods: 50 patients with a radiographic diagnosis of anteromedial osteoarthritis of the knee and had been listed for unicompartmental knee arthroplasty (UKA) had MRI as part of their pre-op workup. At operation all were deemed suitable for UKA using the current Oxford indications. The image sequences were coronal, axial and sagittal with a predetermined cartilage protocol. The state of the ACL, cartilage wear location and pattern, presence of osteophytes and subchondral high signal were assessed.

Results: All the ACLs were visualized and in continuity, however 40% showed intrasubstance high signal.

100% of medial compartments showed full thickness anteromedial loss with preservation of the posteromedial cartilage. When present, the meniscus was extruded in 96% of cases.

Discussion: This study maps the pattern of anteromedial osteoarthritis using modern MRI techniques. This has importance in determining preoperative indications (preservation of ACL and posteromedial cartilage); surgical technique (determine pattern of osteophytes requiring resection) and potentially important for long-term outcome (early lateral compartment changes).

Introduction: Radiolucent lines (RLL) underneath the tibial component are common findings following the Oxford Uni-compartmental Knee Arthroplasty (OUKA)[1]. Many theories have been proposed to explain the cause of RLL, such as poor cementing, osteonecrosis, micromotion, and thermal necrosis, however, the true aetiology and clinical significance remain unclear. We undertook a retrospective study analysing the association between RLL and pre-operative, intra-operative factors, as well as clinical outcome scores.

Method: One hundred and sixty-one knees which had undergone primary Phase 3 medial Oxford OUKA were included in the study. Fluoroscopic radiography films were assessed at five years post-operatively for areas of tibial RLL. The presence of RLL was compared to

patients’ pre-operative demographics for age, weight, height, BMI,

Results: Of the 161 knees in the study, 126 (78%) were found to have tibial RLL. No statistical difference was found between knees with RLL and those without in terms of preoperative demographics, intra-operative factors, or clinical assessment criteria.

Discussion: No clear relationship between RLL, preoperative demographics, and intra-operative factors has been identified in this study. We conclude that tibial RLL following OUKA is a common finding but do not seem to affect medium term clinical outcome.

Introduction: Avascular necrosis of the femoral head after resurfacing hip replacement is an important complication which may lead to fracture or failure. The surgical approach may affect the blood supply to the femoral head. We compared the changes in femoral head oxygenation resulting from the extended posterior approach to those resulting from the anterolateral approach, the trochanteric flip approach and a modified, soft tissue preserving posterior approach.

Methods: We recruited 48 patients who underwent hip resurfacing arthroplasty (HRA) to measure bone oxygen levels. A calibrated gas-sensitive electrode was inserted in the femoral head following division of the fascia lata. Intra-operative X-ray confirmed correct electrode placement. Base-line oxygen concentration levels were recorded immediately after electrode insertion and continuous measurements were then performed throughout surgery. All results were expressed relative to the baseline, which was considered as 100% relative oxygen concentration and changes during surgery through the posterior approach (n=10), the antero-lateral approach (n=12), the trochanteric flip approach (n=15) and the modified posterior approach (n=11) were compared.

Results: The relative oxygen concentration at the end of the procedure was significantly reduced when hip resurfacing was performed through the posterior (22%, SD 31%, p< 0.005) or a modified posterior (35%, SD 31%, p< 0.005) approach, but recovered in the anterolateral (123%, SD 99%, p=0.6) and trochanteric flip group (89%, SD 62%, p=0.5). Sub-group analysis of these two relatively blood preserving approaches showed that intra-operative oxygen concentration was significantly more consistent during surgery through the trochanteric flip approach (p< 0.02).

Discusssion and conclusion: This study has demonstrated that disruption of blood flow to the femoral head during HRA is dependent on the surgical approach. We therefore believe that blood supply preserving approaches (i.e. anterolateral, trochanteric flip) may be associated with a lower risk of avascular necrosis and femoral neck fracture.

Introduction: Although resurfacing hip replacements are widely used there are few little independent outcome data to support this. The aim of this study was to report the 5 year clinical outcome and 7 year survival of an independent series.

Method: 610 Birmingham hip resurfacings were implanted in 532 patients with an average age of 51.8 years (range 16.5–81.6 years) and were followed for between 2 to 8 years; 120 of this series had minimum five year follow-up. Two patients were lost. There were 23 revisions, giving an overall survival of 95% (95% CI 85–99%) at seven years. Fractured neck of femur (n=13) was the most common reason for revision, followed by aseptic loosening (n=4). There were also 3 patients who had failures that were possibly related to metal debris. At a minimum of 5 year follow-up 93% had excellent or good outcome according to the Harris Hip Score. The mean Oxford Hip Score was 16.1 points (SD 7.7) and the mean UCLA activity score was 6.6 points (SD 1.9). There were no patients with definite evidence of radiographic loosening or greater than 10% of neck narrowing.

Discussion: The results demonstrate that with the Birmingham Hip Resurfacing, implanted using the extended posterior approach, the five year survival is similar or better to the reported survival rates for cemented and hybrid THR’s in young patients.

Conclusions: Considering these patients are young and active these results are good and support the use of resurfacing. However, further study is needed to address the early failures; particularly those related to fracture and metal debris.

Introduction: We report on a group of 20 metal-onmetal resurfaced hips (17 patients) presenting with a soft tissue mass associated with various symptoms; these masses we termed pseudotumours.

Methods: All patients underwent plane radiography; CT, MRI and ultrasound investigations were also performed for some patients. Where samples were available histology was performed. Metal ion levels were measured in six patients and one patient had the metal ion levels in the joint fluid measured.

Results: All patients in this series were female. Presentation was variable; the most common symptom was pain or discomfort in the hip region. Other symptoms included spontaneous dislocation, nerve palsy, a noticeable mass or a rash. In all cases a soft tissue mass was present in the region of the hip, this was either solid or cystic. The common histological features were extensive necrosis and lymphocytic infiltration. The blood cobalt and chromium levels varied considerably between the six patients that had these measurements. The median blood chromium level was 3.8 μg/L (range 0.8 to 23 μg/L) and that for cobalt was 11.5 μg/L (range 2.1 to 15 μg/L). The synovial fluid sample taken from a single joint contained much higher metal levels, 701 μg/L for chromium and 329 μg/L for cobalt. Twelve of the 20 cases have so far required revision to a conventional hip replacement.

Discussion: This complication is best imaged with ultrasound, and is not detected by normal xray. We estimate that about 1% of patients develop a pseudotumour in the first five postoperative years. The cause of these pseudotumours is unknown and is probably multifactorial, further work is required to define this; they may be manifestations of a metal sensitivity response. We are concerned that with time the incidence of these pseudo-tumours will increase.

Chondrocytes are responsible for the mechanical resilience of cartilage by controlling the synthesis/degradation of the extracellular matrix. In osteoarthritis (OA), increased activity of cytokines/degradative enzymes (e.g. IL-1beta, MMP-13) play a key role leading to matrix breakdown/cartilage loss. Studying early events in OA might identify targets for limiting the deleterious changes to cartilage stability. Human chondrocyte shape in situ is normally elipsoidal/spheroidal however abnormal forms within otherwise macroscopically normal cartilage are present. Changes to cell shape can alter ECM metabolism and thus these abnormal forms might be an early event in OA. We have investigated whether levels of IL-1beta and MMP-13 are altered in human chondrocytes of abnormal morphology.

Tibial plateau cartilage was obtained from patients undergoing knee arthroplasty and only areas graded 0 or 0–1 studied. The shape of fluorescently-labelled in situ chondrocytes was classified by confocal scanning laser microscopy with cartilage depth, and cells characterised as normal (no cytoplasmic processes) or abnormal (one/more cytoplasmic process). Within grade 0 cartilage about 40% of the cells demonstrated abnormal morphology with a reduced proportion in deep zones. Fluorescence immunohistochemistry of antibodies for IL-1beta or MMP-13 was studied in the same cells and quantified. There was an increase in IL-1beta fluorescence with abnormal chondrocytes within the superficial (p=0.033; 21 joints > 190 cells) and deep zones (p=0.001; 8 joints > 100 cells). There were no differences between MMP-13 labelling of normal compared to abnormal chondrocytes within either the superficial or deep zones.

Our results suggest that in relatively non-degenerate cartilage, a proportion of the chondrocyte population demonstrated abnormal morphology and that these cells have elevated levels of IL-1beta but not MMP-13. However, we do not know if chondrocyte shape alters cytokine levels, or vice versa. Additionally, the role of cartilage age is unclear, as although the cartilage samples were relatively normal they were obtained from aged individuals. Nevertheless these results show changes to chondrocyte morphology and increased levels of IL-1beta, and thus presumably matrix catabolism - in relatively normal human articular cartilage, raising the possibility that this is an early event in cartilage degeneration.

Supported by the Wellcome Trust (075753).

Introduction: Despite a resurgence in cobalt-chromium metal-on-metal arthroplasty, the potential toxicity of metal ions in the periprosthetic area remains a cause for concern. Studies to date have assessed the acute effect of cobalt ions on osteoblasts over 48 hours. The aim of our study was to determine the response of osteoblasts to cobalt ions over a prolonged period of exposure.

Methods. Primary human osteoblasts were cultured and treated with cobalt (10ppm) over 21 days. Osteoblast function was assessed via alkaline phosphatase activity and calcium deposition. ELISA were used to assess chemokine (IL-8, MCP-1 and TNF-α) secretion. Osteoblast gene expression was assessed using microarray analysis and real time PCR. Immunoflourescent cell staining of actin filaments was used to examine osteoblast morphology.

Results: Chemokine (IL-8) secretion by osteoblasts was significantly increased after 10 days of stimulation with cobalt ions. In parallel with this, osteoblast function was also significantly inhibited as demonstrated by reduced alkaline phosphatase activity and calcium deposition. Regarding osteoblast phenotype, FSP-1, CTGF and TGF-β gene expression were upregulated indicating a transition in osteoblast phenotype. Immunoflourescent staining of actin filaments also showed a change in osteoblast morphology. Taken together, these data show cobalt ions induce a change in the osteoblast phenotype to that of a mesenchymal cell type.

Conclusion: After 10 days of treatment with cobalt ions, osteoblasts no longer function as osteogenic cells. they undergo transition to a mesenchymal cell type. Furthermore, IL-8 secretion is increased which attracts neutrophils to the periprosthetic area thereby contributing to the inflammatory response that characterises osteolysis.

Statement of purpose: The aim of this study is to evaluate different designs of unicompartmental knee replacement (UKR) by comparing the peak von Mises and contact stresses in polyethylene (PE) bearings over a step-up activity.

Summary of Methods: A validated finite element (FE) model was used in this study. Three UKR designs were modelled: a spherical femoral component with a spherical PE bearing (fully-congruent), a poly-radial femoral component with a concave PE bearing (semi-congruent), and a spherical femoral component with a flat bearing (non-congruent).

Kinematic data from in-vivo fluoroscopy measurements during a step-up activity was used to determine the relative tibial-femoral position as a function of knee flexion angle for each model. Medial and lateral force distribution was adapted from loads measured in-vivo with an instrumented implant during a step-up activity. The affect that varying the bearing thickness has on the stresses in the bearing was investigated. In addition, varus-valgus mal-alignment was investigated by rotating the femoral component through 10 degrees.

Summary of Results: Only the fully congruent bearing experienced peak von Mises and contact stresses below the PE lower fatigue limit (17MPa) for the step-up activity (fully congruent PE peak contact stress, 5MPa). The highest PE contact stresses were observed for the semi-congruent and non-congruent designs, which experienced approximately 3 times the PE lower fatigue limit. Peak PE von Mises stresses for the semi-congruent and non-congruent designs were similar, peaking at approximately 25MPa. Peak PE von Mises stresses were ameliorated with increased bearing thickness. Varus-valgus mal-alignment had little effect on the peak stresses in the three UKR designs.

Statement of Conclusions: Fully congruent articulating surfaces significantly reduce the peak contact stresses and von Mises stresses in the bearing. The FE model demonstrates that fully congruent bearings as thin as 2.5mm can be used without increasing the contact stresses significantly. Fully congruent designs can use thinner bearings and enable greater bone preservation.

Introduction: The results of the mobile bearing Oxford unicompartmental knee replacement (UKR) in the lateral compartment have been disappointing with a five year survival of 82%. Therefore, it is recommended that mobile bearings should not be used for lateral UKR. This low survivorship is primarily due to high dislocation rate, all occurring in the first year. A detailed analysis of the causes of bearing dislocation confirmed the elevated lateral tibial joint line to be a contributory factor. A new surgical technique was therefore introduced in which care was taken neither to remove too much bone from the distal femur nor to over tighten the knee and therefore ensure that the tibial joint line was not elevated. Other modifications to the technique were also introduced including use of a domed tibial component.

Aim: The aim of this study is to compare the outcome of these iterations: the original series [series I], Series II with improved surgical technique and the domed tibial component [Series III].

Method: The primary assessment of outcome was bearing dislocation at one year. One year was chosen as all the dislocations in the first series occurred within a year. In series I, there were 53 knees, in series II 65 knees and in series III 60 knees, all with a minimum of one year follow up.

Results: In series I, there were 6 bearing dislocations (11%) and the average range of movement (ROM) was 110°. In the second series, there were 2 dislocations (3%) and the average ROM was 118°. In the third series, there were no primary dislocations and the average ROM was 125°.

Conclusions: The improved surgical technique and implant design has reduced the dislocation rate to an acceptable level so a mobile bearing can now be recommended for lateral UKR.

Statement of purpose: Finite element (FE) models of bone can be used to evaluate new and modified knee replacements. Validation of FE models is seldom used, and the quantification of modelling parameters has a considerable effect on the results obtained. The aim of this study is to develop a FE model of a cadaveric tibia and validate it against a comprehensive set of experiments.

Summary of Methods: Seventeen tri-axial rosettes were attached to a cleaned, fresh frozen cadaveric human tibia and the tibia was subjected to 13 loading conditions. Deflection and strain data were used for comparison with the FE model. A geometric model was created on the basis of computed tomography (CT) scans. The CT data was used to map 600 orthotropic material properties to the tibia. All experiments were simulated on the FE model. Measured principal strains were compared to their corresponding FE values using regression analysis. The validated tibia model was reduced in size (75mm to the proximal) and then re-modelled to represent only the proximal tibia. This re-modelled tibia was validated against the reduced size FE model. Virtual surgery was performed on the validated proximal model to implant a UKR.

Summary of Results: For the whole tibia model, the regression line for all axial loads combined had a slope of 0.999, an intercept of −6.24 micro-strain, and an R2 value of 0.962. The root mean square error as a percentage was 5%. For the proximal tibia model, correlation coefficients of 0.989 and 0.976 were obtained for the maximum and minimum principal strains respectively.

Statement of Conclusions: An FE model of an implanted proximal tibia has been validated against experimental data. This model is able to accurately predict the deflection and stresses in a replaced knee joint to obtain clinically relevant information. This will provide a virtual model of unicompartmental arthroplasty, where variables such as fixation method and bearing mechanics can be assessed.

Purpose: To compare the site of lesions in medial and lateral unicompartmental osteoarthritis (OA) of the knee.

Methods: Patients with medial (n=35) and lateral (n=15) OA, having unicompartmental knee arthroplasty, were recruited. Intra-operatively, the distance between the anterior, posterior, medial and lateral margins of the full-thickness lesion and reference lines dividing the condyles was measured. The midpoints of lesions were calculated and groups were compared. Lateral radiographs were used to determine the relationship between the lesion site and knee flexion angle (KFA).

Results: Femoral lesion: In lateral OA, the midpoint of lesions was 25.0mm (SD:8.8) posterior to the reference line passing transversely through the apex of the inter-condylar notch. This was significantly different (p< 0.001) from midpoint in medial OA, which was 10.7mm (SD:9.4) posterior to the reference line.

Tibial lesion: In lateral OA, the midpoint of lesions was 2.0mm (SD:6.5) posterior to the reference line passing through the mid-coronal plane of the resected tibia. This was located significantly more posterior (p=0.038) than midpoint in medial OA, which was 2.2mm (SD:5.7) anterior to the reference line.

Knee Flexion Angle: In lateral OA, the midpoint of lesions was on average at 40° flexion and sites of smaller lesions were very variable. The lesion expanded both anteriorly and posteriorly. In medial OA, smaller femoral lesions occurred in full extension and extended further posteriorly with disease progression.

No significant difference was demonstrated in medial and lateral localisation of the lesions.

Conclusion: Medial OA begins near full extension, progresses in a predictable manner and is perhaps initiated by events occurring at heel strike. Lateral OA begins in flexion in a less predictable manner, at KFA above that seen during the gait cycle. The different sites of lesions in medial and lateral OA suggest different aetiology and pathophysiology. Therefore, prevention and treatment strategies should be different.

We report on a group of 20 metal-on-metal resurfaced hips (17 patients) presenting with a soft tissue mass associated with various symptoms. We describe these masses as pseudotumours.

All patients underwent plain radiography and fuller investigation with CT, MRI and ultrasound. Where samples were available, histology was performed. All patients in this series were female. Presentation was variable; the most common symptom was pain or discomfort in the hip region. Other symptoms included spontaneous dislocation, nerve palsy, an enlarging mass or a rash. The common histological features were extensive necrosis and lymphocytic infiltration. Fourteen of the 20 cases (70%) have so far required revision to a conventional hip replacement and their symptoms have either settled completely or improved substantially since the revision surgery. Two of the three bilateral cases have asymptomatic pseudotumours on the opposite side.

We estimate that about 1% of patients develop a pseudotumour in the first five postoperative years after a hip resurfacing. The cause of these pseudotumours is unknown and is probably multi-factorial, further work is required to define this; they may be manifestations of a metal sensitivity response. We are concerned that with time the incidence of these pseudotumours will increase.

The purpose of this study was to determine if a single physiotherapy intervention would enable patients to kneel following Unicompartmental knee arthroplasty (UKA).

Kneeling is an important functional activity that is frequently not performed after knee arthroplasty, thus affecting a patient’s ability to carry out basic tasks of everyday life. There is however no clinical reason why patients should not kneel and many with proposed knee surgery ask about the possibility of kneeling after their operation.

Sixty adults participated in a prospective randomised controlled trial with blinded assessments. At 6 weeks post-operatively UKA patients were randomised to either the Routine care group where no advice on kneeling was given or to the Kneeling intervention group where participants were taught and given advice on how to kneel and were encouraged to do so. They were re-assessed at 1 year. The primary outcome measure was Question 7 of the Oxford Knee Score which asks the question “Could you kneel down and get up again afterwards?”

Pre-operatively there was no difference in the kneeling ability of the two groups. At 1 year the difference in kneeling ability between the two groups was highly significant (p< 0.05). Spearman’s correlation coefficient showed no significant association between a change in score of Question 7 at 1 year and the following factors; scar position, numbness, range of flexion, arthritic involvement of other joints and pain. Linear regression analysis also confirmed that these factors were not successful in predicting a change in kneeling ability.

This study showed that the single factor predictive of kneeling ability was the physiotherapy intervention provided at 6 weeks post-operatively and it is suggested that kneeling should be incorporated into patient’s post-operative rehabilitation programmes.

Introduction: Treatment options for the young active patient with isolated symptomatic medial compartment OA and pre-existing ACL deficiency are limited. Implant longevity and activity levels may preclude TKA, whilst HTO and unicompartmentasl knee arythroplasty (UKA) are unreliable due to ligamentous instability. UKAs tend to fail because of wear or tibial loosening resulting from eccentric loading. Combined UKA and ACL reconstruction may therefore be a solution.

Method: Fifteen patients with combined ACL reconstruction and Oxford UKA (ACLR group), were matched (age, gender and follow-up period) with 15 patients with Oxford UKA with intact ACL (ACLI group). Prospectively collected clinical and x-ray data from the last follow-up (minimum 3 years, range: 3 – 5) were compared. Ten patients from each group also underwent in-vivo kinematic assessment using a standardised protocol.

Results: At the last follow-up, the clinical outcome for the two groups were similar. One ACLR patient needed revision due to infection. Radiological assessment did not show any significant difference between relative component positions and none of the patients had pathological radiolucencies suggestive of component loosening. Kinematic assessment showed posterior placement of the femur on tibia in extension for the ACLR group, which corrected with further flexion.

Conclusions: The short-term clinical results of combined ACL reconstruction and UKA are excellent. Lack of pathological radiolucencies and near normal knee kinematics suggest that early tibial loosening due to eccentric loading is unlikely.

Aim: The aim of this study was to asses the accuracy of skyline radiographs in the assessment of the patellofemoral joint, when compared to open intraoperative assessment.

Methods: Eighty nine patients undergoing knee replacement surgery were included in the study. Skyline radiographs were obtained preoperatively. These radiographs were assessed and graded by an experienced musculoskeletal radiologist using the Altman and Ahlbäck classifications. The grades were calculated for both the medial and lateral facets of the PFJ. Intraoperative assessment of the Patellofemoral joint was undertaken at the time of surgery. The damage was graded using the modified Collins classification (0: Normal, 1: Superficial damage, 2: Partial thickness cartilage loss, 3: Focal Full thickness cartilage loss < 2cm2, 4: Extensive full thickness cartilage loss < 2cm2). Data was obtained for the Medial Facet, Lateral Facet and Trochlea.

Results: Spearman’s rank correlation coefficient between the radiographic and macroscopic changes within the lateral PFJ were poor with both the Altman 0.22 (p=0.0350) and Ahlbäck 0.24 (p=0.018). The correlation of the medial PFJ was slightly better with a coefficient for Altman 0.42 (P< 0.0001) and Ahlbäck 0.34 (P> 0.001).

Conclusion: In conclusion skyline radiographs provide a poor to moderate preoperative assessment of the degree of osteoarthritis within the patella-femoral joint. This has significant implications for establishing radiographic criteria for planning patella-femoral joint replacement.

Purpose: The aim of this study is to compare the long-term survival results of TKA in patients under the age of 60, using

revision surgery and

Method: From our knee database we identified a cohort of 60 total knee replacements that had been performed over 15 years previously. We identified those who had died, those who had been revised and established the Oxford Knee Score (OKS) for all those still surviving.

Results Using the following endpoint criteria the cumulative 15-year survival was (A) revision surgery alone = 78% (CI 12), (B) revision surgery or an OKS less than or equal to 24 (50% of total OKS) = 63% (CI 13), and (C) revision surgery or moderate pain = 48% (CI 14).

Conclusion The functional survival of TKA in patients under the age of 60 decreases in the second decade following implantation with a significant number of prostheses failing the patient due to knee pain

Introduction: The information in the literature about the relative merits of cemented and cementless unicompartmental knee replacement (UKR) is contradictory, with some favouring cementless fixation while others favouring cemented fixation. Cemented fixations give good survivorship but there is concern about the radiolucency which frequently develops around the tibial component. The exact cause of the occurrence of radiolucency is unknown but according to some, it may suggest suboptimal fixation.

Method: Sixty-two knees (31 in each group) were randomised to receive either cemented or cementless UKR components. The components were similar except that the cementless had a porous titanium and hydroxyappatite (HA) coating. Patients were prospectively assessed by an independent observer pre-operatively and annually thereafter. The clinical assessment included Oxford Knee Score, Knee Society Scores and Tegner activity score. Fluoroscopically aligned radiographs were assessed for thickness and extent of radiolucency under the tibial implant.

Results: At one year there were no differences in the clinical outcome between the groups and there were no loose components. No radiolucencies thicker than 1mm were seen. At one year none of the cementless tibias and 30% of the cemented tibias had complete radiolucencies. One out of 31 cementless (3%) and 12 out of 31 cemented (39%) had partial radiolucencies. This difference between these two groups was high significant (p< 0 0001).

Conclusions: This study clearly demonstrates that the incidence of radiolucency beneath the tibial component is influenced by component design and method of fixation. With identical designs of tibial component none of the cementless components developed complete radiolucences whereas 30% of the cemented components did. We conclude that HA achieves better bone integration than cement.

Introduction: We report on a group of 20 metal-on-metal resurfaced hips (17 patients) presenting with a soft tissue mass associated with various symptoms; these masses we termed pseudotumours. All patients underwent plane radiography; CT, MRI and ultrasound investigations were also performed for some patients. Where samples were available histology was performed.

Methods: All patients in this series were female. Presentation was variable; the most common symptom was pain or discomfort in the hip region. Other symptoms included spontaneous dislocation, nerve palsy, a noticeable mass or a rash. The common histological features were extensive necrosis and lymphocytic infiltration. Fourteen of the 20 cases (70%) have so far required revision to a conventional hip replacement and their symptoms have either settled completely or improved substantially since the revision surgery. Two of the three bilateral cases have asymptomatic pseudotumours on the opposite side.

Conclusions: We estimate that about 1% of patients develop a pseudotumour in the first five postoperative years after a hip resurfacing. The cause of these pseudotumours is unknown and is probably multi-factorial, further work is required to define this; they may be manifestations of a metal sensitivity response. We are concerned that with time the incidence of these pseudotumours will increase.

The aim of this study was to investigate the molecular features of progressive severities of cartilage damage, within the phenotype of Anteromedial Osteoarthritis of the Knee (AMOA).

Ten medial tibial plateau specimens were collected from patients undergoing unicompartmental knee replacements. The cartilage within the area of macroscopic damage was divided into equal thirds: T1(most damaged), to T3 (least damaged). The area of macroscopically undamaged cartilage was taken as a 4th sample, N. The specimens were prepared for histological (Safranin-O and H& E staining) and immunohistochemical analysis (Type I and II Collagen). Immunoassays were undertaken for Collagens I and II and GAG content. Real time PCR compared gene expression between areas T and N.

There was a decrease in OARSI grade across the four areas, with progressively less fibrillation between areas T1, T2 and T3. Area N had an OARSI grade of 0 (normal).

The GAG immunoassay showed decreased levels with increasing severity of cartilage damage (ANOVA P< 0.0001). There was no significant difference in the Collagen II content or gene expression between areas. The Collagen I immunohistochemistry showed increased staining within chondrocyte territorial areas in the undamaged region (N) and immunoassays showed that the Collagen I content of this macroscopically and histologically normal cartilage, was significantly higher than the damaged areas (ANOVA P< 0.0001). Furthermore, real time PCR showed that there was a significant increase in Collagen I expression in the macroscopically normal areas (p=0.04).

In AMOA there are distinct areas, demonstrating progressive cartilage loss. We conclude that in this phenotype the Collagen I increase, in areas of macroscopically and histologically normal cartilage, may represent very early changes of the cartilage matrix within the osteoarthritic disease process. This may be able to be used as an assay of early disease and as a therapeutic target for disease modification or treatment.

Introduction: Avascular necrosis of the femoral head after resurfacing hip replacement is an important complication which may lead to fracture or failure. We compared the changes in femoral head oxygenation resulting from the posterior approach to those resulting from the anterolateral approach and the trochanteric flip approach.

Methods: In 37 patients undergoing hip resurfacing surgery, a calibrated gas-sensitive electrode was inserted superolaterally in the femoral head via the femoral neck following division of the fascia lata. Inter-operative X-ray confirmed correct electrode placement. Baseline oxygen concentration levels were recorded immediately after electrode insertion. All results were expressed relative to this baseline, which was considered as 100% relative oxygen concentration. Oxygen levels were monitored continuously throughout the operation. 10 patients underwent surgery through the posterior approach, 12 patients through the anterolateral approach and 15 through the trochanteric flip approach.

Results: A similar pattern of intra-operative reduction in femoral oxygen concentration was observed for all reviewed approaches. The average change in oxygen concentration during surgery through the trochanteric flip approach was found to be significantly less than through posterior (p< 0.02) and anterolateral (p< 0.02) approaches. Oxygen concentration following joint relocation and soft tissue reconstruction recovered significantly in the anterolateral and trochanteric flip group only. The posterior approach resulted in significantly lower oxygen concentration at the end of the procedure (22%, SD 31) than the anterolateral approach (123%, SD 99; p< 0.05) and the trochanteric flip approach (89%, SD 62, p< 0.02).

Discussion and Conclusion: The anterolateral and trochanteric flip approaches disrupt the femoral head blood supply significantly less than the posterior approach in patients undergoing resurfacing. The most consistent intra-operative oxygen levels were observed during surgery through the trochanteric flip approach. Oxygen concentration during the anterolateral approach was found to be highly dependent upon leg position. The incidence of complications related to avascular necrosis might be decreased by adopting blood supply conserving surgical approaches.

Introduction: A major concern with cemented hip resurfacing arthroplasty (HRA) femoral components is the thermal damage to femoral head during cement curing; this maybe linked to fracture (reported incidence ~2%) and early failure. We investigated the effect of a modifid surgical technique using pulse lavage, lesser trochanter suction and early reduction on the maximum temperature recorded in the femoral head during HRA, compared to manual lavage and reduction after cement curing.

Methods: Patients undergoing total hip replacement (THR) were given a dummy HRA procedure, during which a temperature probe was inserted into the femoral head and the measuring tip placed close to the reamed surface; the position of the probe was confirmed by inter-operative xray. Four subjects received a dummy HRA femoral component using manual lavage and Simplex cement. The implanted femur was kept dislocated until the cement cured. The implanted heads were then removed and sectioned to locate the temperature probes, the THR surgery was then performed. Five patients receiving a definitive HRA were also measured; for these subjects suction on the lesser trochanter was used, pulse lavage given for 30 seconds prior to cementing with Simplex, and pulse lavage of the femoral head for 2 minutes, applied 1 minute after cementing the femoral component. The implanted joint was then immediately reduced and a further two minutes of pulse lavage applied to the reduced joint. Temperatures were recorded until the cement finally cured. In every case the cement was hand mixed for 1 minute and the component implanted at 2 minutes 30 seconds after mixing began.

Results: Sectioning showed that probe tips were < 0.5mm from cement mantle. The maximum temperature recorded in the femoral head was significantly (p=0.014) greater for the manual technique, median value of 47.2°C (37.0 to 67.9°C), than for the pulse lavage technique, median value of 32.7°C (31.7 to 35.6°C).

Discussion: The results show that excessive bone temperatures can occur during hip resurfacing. Temperatures above 45°C kill bone cells, the manual technique may lead to substantial thermal necrosis. Technique modification, with the use of suction on the lesser trochanter, generous use of pulse-lavage and joint reduction prior to cement curing, significantly reduced the temperatures recorded. With the modified technique, the maximum temperatures were well below the threshold of thermal damage. This modified technique is recommended as the potential for thermal bone necrosis is significantly reduced.

Introduction: Avascular necrosis of the femoral head after resurfacing hip replacement is an important complication which may lead to fracture or failure. We compared the changes in femoral head oxygenation resulting from the anterolateral approach to those resulting from the posterior approach.

Methods: In 22 patients undergoing hip resurfacing surgery, a calibrated gas-sensitive electrode was inserted supero-laterally in the femoral head via the femoral neck following division of the fascia lata. Inter-operative X-ray confirmed correct electrode placement. Baseline oxygen concentration levels were recorded immediately after electrode insertion. All results were expressed relative to this baseline, which was considered as 100% relative oxygen concentration. Oxygen levels were monitored continuously throughout the operation. 10 patients underwent surgery through the posterior approach, 12 patients through the antero-lateral approach.

Results: During the operation patterns were similar for both groups, except following joint relocation and soft tissue reconstruction; oxygen concentration recovered significantly in the anterolateral group only. The posterior approach resulted in significantly lower (p< 0.01) oxygen concentration at the end of the procedure (22%, SD 31) than the antero-lateral approach (123%, SD 99).

Discussion and Conclusion: The anterolateral approach disrupts the femoral head blood supply significantly less than the posterior approach in patients undergoing resurfacing. The incidence of complications related to avascular necrosis might be decreased by adopting blood supply conserving surgical approaches.

Introduction: Treatment options for the young active patient with isolated symptomatic medial compartment osteoarthritis and pre-existing anterior cruciate ligament (ACL) deficiency are limited. Implant longevity and activity levels may preclude total knee arthroplasty (TKA), whilst high tibial osteotomy HTO and unicompartmental arthroplasty (UKA) are unreliable due to ligamentous instability. UKA’s tend to fail because of wear or tibial loosening resulting from eccentric loading. Combined UKA and ACL reconstruction may therefore be a solution.

Method: Fifteen patients with combined ACL reconstruction and Oxford UKA (ACLR group), were matched (age, gender and follow-up period) with 15 patients with Oxford UKA with intact ACL (ACLI group). Prospectively collected clinical and x-ray data from the last follow-up (minimum 3 years, range: 3–5) were compared. Ten patients from each group also underwent in-vivo kinematic assessment using a standardised protocol.

Results: At the last follow-up, the clinical outcome for the two groups were similar (ACLR: OKS 46, KSS (objective): 99, ACLI: OKS 43, KSS (objective): 94). One ACLR patient needed revision due to infection. Radiological assessment did not show any significant difference between relative component positions and none of the patients had pathological radiolucencies suggestive of component loosening. Kinematic assessment showed posterior placement of the femur on tibia in extension for the ACLR group, which corrected with further flexion.

Conclusions: The short-term clinical results of combined ACL reconstruction and UKA are excellent. Lack of pathological radiolucencies and near normal knee kinematics suggest that early tibial loosening due to eccentric loading is unlikely. Similarly, wear is unlikely to be a problem because of the wear resistance of mobile bearing devices.

Introduction: The Oxford unicompartmental knee replacement (UKR) use in the lateral compartment has been associated with a reduced flexion range and increased medial compartment pain than seen with its medial counterpart due to, in part, the inadequacy of a flat tibial tray replacing the domed anatomy of the lateral tibia. A new design incorporating a domed tibial component and a biconcave meniscal bearing has been developed to overcome these problems.

This study reports a clinical comparison of new and old establishing whether this modified implant has maintained the established normal kinematic profile of the Oxford UKR.

Method: Patients undergoing lateral UKR for OA were recruited for the study. Fifty one patients who underwent UKR with the domed design were compared to 60 patients who had lateral UKR with a flat inferior bearing surface. Kinematic evaluation was performed on 3 equal subgroups (n = 20); Group 1-Normal volunteer knees, Group 2-Flat Oxford Lateral UKR’s and Group 3-Domed Oxford Lateral UKR’s. The sagittal plane kinematics of each knee was assessed using videofluoroscopic analysis whilst performing a step up and deep knee bend activity. The fluoroscopic images were recorded digitally, corrected for distortion using a global correction method and analysed using specially developed software to identify the anatomical landmarks needed to determine the Patella Tendon Angle (PTA) (the angle the patella tendon and the tibial axis).

Knee kinematics were assessed by analysing the movement of the femur relative to the tibia using the PTA.

Results: PTA/KFA values, for both devices, from extension to flexion did not show any significant difference in PTA values in comparison to the normals as measured by a 3-way ANOVA. The Domed implant achieved higher maximal active flexion during the lunge exercise than those with a flat implant. Only 33% of the flat UKR’s achieved KFA of 130° or more under load whilst performing a lunge, compared with 75% of domed UKR’s and 90% of normal knees. No flat UKR achieved a KFA of 140° or more, yet 50% of all domed UKR’s did, as did 60% of all normal knees.

Conclusions: There was no significant difference in sagittal plane kinematics of the domed and flat Oxford UKR’s. Both designs had favorable kinematic profiles closely resembling that of the normal knee, suggesting normal function of the cruciate mechanism. The domed knees had a greater range of motion under load compared to the flats, approaching levels seen with the normal knee, suggesting that limited flexion for the flat plateau results from over tightening in high flexion and that this is corrected with the domed plateau. Problems with the second generation of lateral Oxford UKA have been rectified by a new bi-concave bearing without losing bearing stability and normal kinematics.

Introduction: Interest in hip resurfacing has recently been renewed by the introduction of metal-on-metal designs; it is being increasingly used for young patients, with over 30,000 implanted worldwide. The 5 year clinical results appear promising, but there are no long term data available. Radiostereometry (RSA) measures of implant migration have been able to predict implant failure; specifically large and continuous migration predicts aseptic loosening. We present the results of a five year RSA study examining the migration of the Birmingham Hip Resurfacing (BHR).

Methods: Twenty-four subjects with primary OA were implanted with the BHR device and with bone markers for RSA. RSA measurements were taken at 3, 6, 12, 24 and 60 months. The migration of the head and the tip of femoral component were measured in 3D.

Results: Preliminary analysis showed that the total 3D migration of the head and tip over five years was 0.32mm and 0.23mm respectively.

Discussion: A distal migration of more than 0.4mm over 2 years increases the likelihood of failure in conventional stems. The total migration of the BHR was approximately 0.3mm over a five year period, significantly less than cemented THR devices. The device is stable and this is promising for long-term survival.

Finite element (FE) analysis is widely used to calculate stresses and strains within human bone in order to improve implant designs. Although validated FE models of the human femur have been created (Lengsfeld et al., 1998), no equivalent yet exists for the tibia. The aim of this study was to create such an FE model, both with and without the tibial component of a knee replacement, and to validate it against experimental Results: A set of reference axes was marked on a cleaned, fresh frozen cadaveric human tibia. Seventeen triaxial stacked strain rosettes were attached along the bone, which was then subjected to nine axial loading conditions, two four-point bending loading conditions, and a torsional loading condition using a materials testing machine (MTS 858). Deflections and strain readings were recorded. Axial loading was repeated after implantation of a knee replacement (medial tibial component, Biomet Oxford Unicompartmental Phase 3). The intact tibia was CT scanned (GE HiSpeed CT/i) and the images used to create a 3D FE mesh. The CT data was also used to map 600 transversely isotropic material properties (Rho, 1996) to individual elements. All experiments were simulated on the FE model. Measured principal strains and displacements were compared to their corresponding FE values using regression analysis.

Experimental results were repeatable (mean coefficients of variation for intact and implanted tibia, 5.3% and 3.9%). They correlated well with those of the FE analysis (R squared = 0.98, 0.97, 0.97, and 0.99 for axial (intact), axial (implanted), bending, torsional loading). For each of the load cases the intersects of the regression lines were small in comparison to the maximum measured strains (< 1.5%). While the model was more rigid than the bone under torsional loading (slope =0.92), the opposite was true for axial (slope = 1.14 (intact) 1.24 (implanted)) and bending (slope = 1.06) loads. This is probably due to a discrepancy in the material properties of the model.

Human articular cartilage samples were retrieved from the resected material of patients undergoing total knee replacement. Samples underwent automated controlled freezing at various stages of preparation: as intact articular cartilage discs, as minced articular cartilage, and as chondrocytes immediately after enzymatic isolation from fresh articular cartilage. Cell viability was examined using a LIVE/DEAD assay which provided fluorescent staining. Isolated chondrocytes were then cultured and Alamar blue assay was used for estimation of cell proliferation at days zero, four, seven, 14, 21 and 28 after seeding. The mean percentage viabilities of chondrocytes isolated from group A (fresh, intact articular cartilage disc samples), group B (following cryopreservation and then thawing, after initial isolation from articular cartilage), group C (from minced cryopreserved articular cartilage samples), and group D (from cryopreserved intact articular cartilage disc samples) were 74.7% (95% confidence interval (CI) 73.1 to 76.3), 47.0% (95% CI 43 to 51), 32.0% (95% CI 30.3 to 33.7) and 23.3% (95% CI 22.1 to 24.5), respectively. Isolated chondrocytes from all groups were expanded by the following mean proportions after 28 days of culturing: group A ten times, group B 18 times, group C 106 times, and group D 154 times.

This experiment demonstrated that it is possible to isolate viable chondrocytes from cryopreserved intact human articular cartilage which can then be successfully cultured.

Aim: The aim of this study was to investigate whether viable chondrocytes can be isolated and subsequently expanded in culture, from cryopreserved intact human articular cartilage.

Method: Human articular cartilage samples, retrieved from patient undergoing total knee replacement, were cored as 5 mm diameter discs then minced to approximately 0.1 mm³ size pieces. Samples were cryopreserved at the following stages; intact cartilage discs, minced cartilage and chondrocytes immediately after enzymatic isolation. After completing of isolation, cell viability was examined using LIVE/DEAD fluorescent staining. Isolated chondrocytes were then cultured and a cell proliferation assay was performed at day 4, 7, 14, 21 and 28 days.

Results: The results showed that the viability of isolated chondrocytes from control, cryopreserved intact AC discs, minced AC and isolated then frozen samples were 71.84 ± 2.63%, 25.61 ± 2.41%, 31.32 ± 2.47 % and 42.53 ± 4.66% respectively. Isolated chondrocytes from all groups were expanded by following degrees after 28 days of culture; Group A: 10 times, Group B: 18 times, Group C: 106 times, and Group D: 154 times.

Conclusion: We conclude that viable chondrocytes can be isolated from cryopreserved intact human AC and then cultured to expand their number. This method could be employed to patients benefit undergoing autologous chondrocyte implantation.

Anteromedial osteoarthritis is a distinct phenotype of osteoarthritis. The arthritic lesion on the tibia is localised to the anteromedial quadrant with an intact ACL. Deficiency of the ACL leads to a progression to tricompartmental disease. Within the spectrum of intact ACL a varying degree of ligament damage is seen. Our aim was to correlate the progression of ACL damage to the geographical extent of disease and the degree of cartilage loss on the tibial plateau.

We systematically digitally mapped 50 tibial plateau resection specimens from clinical photographs of patients undergoing unicompartmental arthroplasty, additionally the damage to their ACL was graded (0: normal, 1:synovium loss, 2:longitudinal splits)

These images were imported into image analysis software. Accurate measurements were made of the dimensions of the specimen. Measurements included the AP distance to the anterior and posterior aspect of the lesion, and the distance to the start of the macroscopically non damaged cartilage. The areas of cartilage damage and full thickness loss were also recorded. The results were represented as a % of total area to account for variation in size of the resection specimens. We compared % of full thickness loss in patients with normal to those with damaged, but functionally intact ligaments.

All specimens had a similar macroscopic appearance. A significant difference was seen with the progression of ACL damage and area of eburnation of bone. Using an unpaired t test, a significant difference in area of % full thickness cartilage loss (P=0.047) was seen between patients with a normal and longitudinal splits within their ACL. No correlation between the clinical status of the ACL and start or finish point of cartilage loss on the tibial plateau

We surmise that the progression from anteromedial to tricompartmental osteoarthritis of the knee may be related to the graduated damage of the ACL.

A sibling risk study that shows a statistically significant increase in risk for anteromedial osteoarthritis of the knee.

Anteromedial osteoarthritis is a distinct phenotype of osteoarthritis. Previous studies have shown a genetic aetiology to both hip and knee osteoarthritis. The aim of this study was to determine the sibling risk of antero-medial osteoarthritis of the knee.

We conducted a retrospective cohort study of 132 probands with primary anteromedial osteoarthritis, who had undergone unicompartmental arthroplasty. Sibling were identified as having symptomatic knee problems by postal Oxford Knee Score (OKS). A positive OKS was defined as an OKS+/− 2SD of the mean of the proband group. Sibling spouses were used as controls. Those siblings & spouses that were symptomatic from the OKS were invited to undergo Knee X-rays, to look for radiological signs of osteoarthritis. Osteoarthritis was diagnosed as greater than Grade II on the Kell-gren Lawrence classification. The pattern of disease was noted and it was considered if the sibling were suitable for a unicompartmental knee arthroplasty. The prevalence and sibling risk of anteromedial osteoarthritis was determined using a randomly selected single sibling per proband family. The prevalence was determined in the 103 single proband sibling pairs.

There was a statistically significant risk within the sibling group P= 0.024 using the Chi square test. The relative risk of anteromedial osteoarthritis was. 3.21(95% CI 1.08 to 9.17)

Genetic factors play a major role in the development of anteromedial osteoarthritis.

Background: The Oxford unicompartmental knee replacement (UKR) use in the lateral compartment has been associated with a reduced flexion range, increased medial compartment pain and a higher dislocation rate than seen with its medial counterpart due to the inadequacy of a flat tibial tray replacing the domed anatomy of the lateral tibia. A new design incorporating a domed tibial component and a biconcave meniscal bearing has been developed to overcome these problems. This current study was designed to establish whether this modi-fied ‘domed’ implant has maintained the established normal kinematic profile of the Oxford UKR.

Methods: The study population consisted of 60 participants from three equal groups; Group 1- Normal volunteer knees (n = 20), Group 2 – Flat Oxford Lateral UKR’s (n = 20) and Group 3 – Domed Oxford Lateral UKR’s (n = 20). The sagittal plane kinematics of each involved knee was assessed continuously using videofluoroscopic analysis. A standardised protocol of step-up and deep lunge was used to assess loadbearing range of motion during which the patella tendon angle (PTA) was measured as a function of the knee flexion angle (KFA).

Results: PTA/KFA values compared at 10 degree KFA increments from maximal extension to maximal flexion for all 3 groups did not demonstrate any statistically significant difference in PTA values between any group as measured by a 3-way ANOVA. The Domed implant achieved higher maximal active flexion during the lunge exercise than those with a Flat implant. Only 33% of the Flat UKR’s achieved KFA of 130 degrees or more under load whilst performing a lunge, compared with 75% of domed UKR’s and 90% of normal knees. No Flat UKR achieved a KFA of 140 degrees or more, yet 50% of all domed UKR’s did, as also did 60% of all normal knees.

Conclusions: There is no significant difference in the sagittal plane kinematics of the domed and flat Oxford UKR’s. Both implant designs have a favourable kinematic profile closely resembling the normal knee. The domed knees though do have a greater range of motion under load as compared to the flats, approaching levels seen with the normal knee.

Wear debris is a key factor in the pathophysiology of aseptic loosening of orthopaedic endoprostheses. Cobalt-chromium-molybdenum (Co-CrMo) alloys are used for metal-metal hip implants due to their enhanced wear resistance profiles. Whilst these alloys have widespread clinical application, little is known about their direct effect on osteoblast biology. To address this issue, in this study we have investigated particle-mediated inflammation, as a putative mechanism of aseptic loosening. The effects of Co2+ ions on the bone cellular milieu were assessed in vitro by profiling of classical inflammatory mediators. The inflammatory driver PGE2 was quantified and found to be increased, following osteoblast stimulation with metal ions, suggesting the initiation of a local inflammatory response to metal particle exposure. To determine the biological import of this molecular event, the role of metal ions in recruiting inflammatory cells by chemokine production was assessed. These data demonstrated significant induction of the chemokines, IL-8 and MCP-1 following both 12 and 24 hour exposure to 10ppm of Co2+. In this study, we demonstrate that Co2+ particles can rapidly induce chemotactic cytokines, IL-8 and MCP-1 early stress-responsive chemokines that function in activation and chemotaxis of monocytes, and PGE2, which stimulates bone resorption. We have shown that this induction occurs at a transcriptional level with significantly increased mRNA levels. These data lend further weight to the hypothesis that wear mediated osteolysis, is due, at least in part, to underlying chronic inflammation.

There has been controversy about the practice of mixing femoral and acetabular implants from different manufacturers in total hip replacement (THR). We studied the clinical outcomes of over 1500 patients in the Exeter Primary Outcomes Study (EPOS) who underwent primary THR with a cemented Exeter stem (Stryker) but with various acetabular components. This was a prospective non-randomised multicentre study. Patient reported hip scores (Oxford Hip Score (OHS)) were measured before operation and at 1 and 2 years post operatively. The choice of acetabular implant was at the surgeons’ discretion. 982 patients had reached four year follow up. Six types of acetabular component were examined (Exeter, Exeter Contemporary, Duraloc (all Stryker), Charnley (DePuy), Cenator (Corin), and Trilogy (Zimmer)).

Patients who received a Charnley cup were found to have worse pre-operative status (significantly higher OHS) than those receiving other cups (especially those receiving Exeter cups) (p< 0.01). Post operatively, this difference continued, with the absolute OHS value remaining greater (i.e. worse clinical result) for the Charnley cup at 1, 2, 3 and 4 years. The association of poor pre-op status with worse post-op result was anticipated. However, when the clinical benefit of surgery (i.e. the improvement in OHS between pre-op and post-op) was assessed, there was no significant difference between the various implants at 1, 2, 3 and 4 years.

These results demonstrate that initial clinical benefit of surgery does not differ between patients receiving acetabular implants from varying manufacturers when the Exeter stem is used. These patients will be followed further to determine whether such “mixing and matching” results in differences in longer term outcomes.

The optimal surgical approach for total hip replacement (THR) remains controversial. We report the clinical outcomes of over 1000 patients in the Exeter primary outcomes study (epos) who underwent primary THR with a cemented Exeter stem (Stryker) but with various acetabular components. This was a prospective non randomised multi centre study. Patient reported hip scores (oxford hip score (OHS)) were measured before operation and at 3 months (n= 1312), 1 (n=1276), 2 (n= 1225), 3 (n=1205) and 4 (n=975) years post operatively. Physician reported scores (Merle d’Aubigne / Postel, MDAP) were measured before operation and at 12 months. All of the operations were carried out using either the anterolateral (Hardinge or modification) or posterior approach.

The posterior approach gave better absolute OHS scores at 3 months and 1 year compared with the anterolateral approach. The improvement in OHS between the pre-op and relevant post-op score was better for the posterior than the Hardinge approach, and this extended to 4 years (all p< 0.05). Early dislocation rates were low in both groups. There was significantly more likely to be heterotopic ossification in the Hardinge group, while stem alignment into varus was more common in the posterior approach group. There was no significant difference between the two approaches as measured using the MDAP score at pre-op or at 12 months after surgery.

These results demonstrate that initial patient perceived clinical benefit of surgery is greater using a posterior than with an anterolateral approach. This should be considered when assessing the best approach for a particular patient. The current results emphasise the value of using patient based outcome measures, as the MDAP score did not detect a difference in outcomes between the two groups.

Introduction: Restoration of predictable and normal knee kinematics after a TKR can improve the patient’s function. Traditional designs exhibit grossly abnormal kinematics with the femur subluxing posteriorly in extension and a paradoxical forward slide in flexion. In addition, the kinematics are very variable. Newer designs were intended to overcome these problems, owing to their ability to provide ‘guided motion’ of the components. The medial pivot knee uses a specifically designed articulating surface constraining the femoral component to externally rotate about an axis through the medial compartment.

This study assesses the functional in vivo kinematics of Advanced Medial Pivot (AMP) TKR and compares it to kinematics of the normal knee.

Methods: Thirteen patients with pre-operative diagnosis of primary osteoarthritis, who had undergone a knee replacement with the AMP knee at least one-year prior were recruited in this study. All had an excellent clinical outcome (as assessed by AKSS) and underwent fluoro-scopic analysis whilst performing a step up activity. Knee kinematics were assessed by analysing the movement of the femur relative to the tibia using the Patella Tendon Angle (PTA) through the range of knee flexion. This data was compared to that of thirteen normal knees.

Results: The PTA for the normal knee has a linear relationship with knee flexion. The PTA is 14 degrees in full extension and decreases to -10 degrees at 100 degrees knee flexion during a step-up exercise. Between extension and 60 degrees of knee flexion, no significant difference was found between the PTA for the normal knee and for the AMP. The PTA for AMP is significantly higher for values of knee flexion exceeding 60 degrees. The standard deviation for different values of knee flex-ion is similar to that seen in the normal knee.

Conclusions: In extension, the PTA is near normal but in flexion PTA is higher than normal suggesting that the femur is too anterior. The variability of the kinematics for AMP TKR is similar to that of the normal knee and is better than that of most other knee designs that we have studied in the past, indicating that it is a stable TKR.

Introduction: The cam-post mechanism of Posterior Stabilized Total Knee Arthroplasty (PS-TKA) should provide a constraint that limits anterior translation of the femur on the tibia in flexion and thereby ensure femoral roll-back with progressive knee flexion. In a previous fluoroscopic study we showed that the sagittal plane kinematics of a PCL substituting TKA (Scorpio PS) was abnormal in flexion, suggesting inefficiency of the cam-post mechanism. We also assessed the movement of the femur relative to the tibia using the Patella Tendon Angle (PTA) through the range of knee flexion (0 to 90 degrees). The aim of the current study was to investigate in greater detail why the cam-post mechanism was ineffective by assessing the contact point movement and the distance between the cam and post.

Method: Twelve patients with Scorpio PS TKA underwent fluoroscopic assessment of the knee during a step up exercise and a weight bearing deep knee bend. The image distortion was corrected using a global correction method and the data was analysed using a 3D model fitting technique. Having determined the component position, the minimum distance between cam and post were determined. The femoro-tibial contact positions of the medial and lateral condyles were determined relative to the mid-coronal plane of the tibial component. The PTA was calculated by measuring the angle subtended by patella tendon with the tibial axis and was plotted against knee flexion angle (KFA).

Results: The relationship between PTA and KFA was abnormal relative to the normal knee. Between extension and 60 degrees flexion there was forward movement of both medial (11 mm) and lateral (5 mm) femoral condyles. Thereafter, both condyles moved back (10 mm). The cam-post mechanism failed to engage in one case while in others it engaged between 70 to 100 degrees.

Conclusions: The 3D analysis has confirmed the preliminary findings of the previous study using the PTA and KFA relationship. Despite the cam engaging in flexion normal knee kinematics were not restored. The femoral roll-back is inadequate and starts to occur at least 20 degrees before the cam and post engage.

Background: The Oxford unicompartmental knee replacement (UKR) use in the lateral compartment has been associated with a reduced flexion range and diminished femoral rollback. It is postulated that this may be due to a flat tibial tray replacing the domed anatomy of the lateral tibia, tightening the posterolateral flex-ion gap. A new design incorporating a domed tibial component and a biconcave meniscal bearing has been developed to increase; (i) the posterolateral flexion gap in deep knee flexion (ii) meniscal bearing movement and (iii) lateral femoral condyle (LFC) rollback. A cadaveric study was designed to test these three outcomes.

Methods: The sagittal plane kinematics of seven thawed fresh frozen cadaver specimens within an upright Oxford testing rig were assessed under three different conditions; (i) intact normal cadaver knee (ii) flat lateral Oxford UKR (iii) domed lateral Oxford UKR. Each condition was tested during three ranges of motion (ROM) and data recorded during a flexion or extension half cycle. Knee flexion angle (KFA) and displacement measures of the lateral collateral ligament (LCL), LFC rollback and anteroposterior meniscal bearing movement were performed throughout knee ROM using four [3 linear, 1 rotary] potentiometer devices. Potentiometer data was recorded as a voltage reading and subsequently converted to either a millimetre displacement or degree measure using a calibration formula. All data points were compared at 10 degree interpolations of KFA.

Results: The flexion half cycles demonstrated the flat Oxford lateral UKR achieved 80.7% of normal cadaveric LFC rollback. The domed Oxford lateral UKR achieved 108.8% of normal cadaveric LFC rollback. The ratio of LFC rollback in the domed to flat UKR’s was 1.35 times (134.9%). Meniscal bearing movement in flexion demonstrated a domed to flat UKR ratio of 1.3 times (129.7%). Similar values were obtained for extension half cycles in favour of the domed Oxford lateral UKR. No significant differences were identified in LCL measures.

Conclusions: The domed Oxford lateral UKR implant allows for improved bearing movement and femoral rollback when compared to the flat Oxford lateral UKR. The sagittal plane kinematics of the domed Oxford lateral UKR as represented by femoral rollback values approximate those of the normal cadaver knee.

There has been controversy about whether limb length discrepancy (LLD) affects outcome after total hip replacement (THR). We examined input variables and outcomes of over 1200 patients who received primary THR with the Exeter stem and a variety of acetabular components in the Exeter Primary Outcomes Study. This was a non randomized prospective multi centre study.

We examined whether specific groups of patients or surgeons were more likely to have LLD at one year after surgery. Data for leg length measured on clinical assessment were available for 1207 patients at 1 year. 237 patients were recorded as having a leg length difference of 1 cm or more, and 73 a difference of 2 cm or more. 138 were longer on the operated side and 99 were shorter. The likelihood of having LLD of 2 cm or more was not significantly affected by the grade of surgeon (consultant or trainee), BMI, age of patient, position of patient during surgery or surgical approach, or the use of regional or general anaesthetic.

We examined the effect of LLD on outcomes at 3 months and 1,2,3 and 4 years. Patients with LLD > 1cm had significantly worse Oxford Hip Scores (OHS) at 1, 2, 3 and 4 years (p< 0.01), with the OHS generally being an average 2 points worse in those with LLD. The most consistent difference between those with and without LLD was a patient reported limp on the Oxford Hip Questionnaire.

We conclude that LLD is a common problem after THR and that all patient groups may be affected. It is associated with a significantly worse functional outcome as measured by a validated hip score. Systematic adoption of accurate intra-operative measures of leg length might pay dividends in minimizing this complication.

Hip resurfacing arthroplasty (HRA) is increasingly carried out as an alternative to total hip arthroplasty (THA) in young patients. During the procedure, a metal stem on the retrosurface of the HRA is inserted into the femoral head to ensure the implant is located centrally with respect to the femoral neck. It has been suggested that the stem may interfere with bone loading. In light of this, the current study employed finite element (FE) models to investigate the change in the HRA-implanted bone mechanics as a result of removing the stem. FE models of a cadaveric femur pre- and post-HRA surgery were analysed to determine changes in bone stress/ strain.

The implanted models simulated geometry for a cemented HRA with and without a non-cemented stem (HRA-Stem and HRA-NoStem, respectively) and included more accurate multiple material parameters to simulate the non-homogeneous material distribution in the femoral bone. The models included loading conditions simulating an instant at 10% of the gait cycle. Bone stresses/strains in the femoral head and neck of the implanted models were compared with the intact condition to assess the change in bone mechanics. Changes in cement mantle stresses between the HRA-Stem and HRA-NoStem models were also compared.

When comparing similar volumes of bone in the femoral neck, both HRA models showed a similar variation in stress from the intact condition and bone stresses were low in comparison to the ultimate strength of cortical bone. There was less change in peak strain energy in the femoral head of the HRA-NoStem model than the HRA-Stem model. Cement mantle stresses in the HRA-NoStem model were slightly higher than for the HRA-Stem model and the peak compressive stress was close to the fatigue limit for bone cement.

These preliminary results suggest that the bone loading is more normal without the stem. However, there are increased cement mantle stresses.

There is concern that patients undergoing total hip replacement by trainee surgeons may do worse than those operated on by consultants. We examined the clinical outcomes of over patients in the Exeter Primary Outcomes Study who underwent primary THR with a cemented Exeter stem (Stryker) with various acetabular components. Over 1400 patients entered the prospective non-randomised multi centre study. Patient reported hip scores (Oxford Hip Score (OHS)) were measured pre operation and at 3 months, 1,2,3 and 4 years post operatively.

The number of patients assessed at 4 years was 982. Trainees operated on patients with worse pre-operative OHS (p< 0.05; t test)) and on significantly less patients under 60 years (p< 0.05 chi square). There was no significant difference in the improvement in OHS (i.e. pre-op OHS – post-op OHS) at any post-operative time point between consultants and trainees. However, patients operated upon by consultants had consistently better postoperative absolute OHS scores (p< 0.05 at 3 months and 1, 2, 3 and 4 years; t test). Complications were low in both groups. Operations performed by trainees lasted longer (mean of 104 vs. 85 minutes). There was also no difference in OHS scores of patients operated by trainees whether they were assisted by an SHO (n=132) or by a consultant (n=249).

In this large cohort of patients there was no difference in the improvement in OHS between patients operated by registrars and consultants. The difference in the absolute OHS values is likely explained by the difference in pre-operative status. We conclude that THRs performed by consultants and by trainees under appropriate supervision give similar initial clinical results. Given current changes to shorten surgical training, it is important that outcomes of THRs performed by future trainees are reviewed to ensure that outcomes are maintained.

The design philosophy of polished tapered total hip replacements (THR), such as the Exeter, intends for them to migrate distally within the cement mantle. As well as migration, dynamically induced micromotion (DIMM) occurs as a result of functional activity between the implant and the cement. The aim of the current study was to develop and validate a finite element (FE) model of the Exeter/cement/bone system which can be used to predict DIMM and investigate the stresses induced in the cement mantle during functional activity.

In the context of the current study, DIMM is defined as the displacement of the implant component relative to the bone when moving from double leg stance to single leg stance on the operated limb. Using Roentgen Stereo-photogrammetric Analysis (RSA), DIMM was measured in 21 patients implanted with Exeter stems 3 months post-operatively. A previous study, using a reduced FE model of the Exeter stem and the surrounding cement mantle focused on the solution of the contact problem at the stem-cement interface. It was demonstrated that sliding contact combined with Coulomb friction and an appropriate parameter setting could be used to predict DIMM of a polished tapered stem. For the purposes of the current study, the previous simple model was incorporated into the FE model of the Muscle Standardised Femur and validated against the RSA measurements for DIMM. For the current extended model, loading included muscle forces representing all active muscles acting on the femur. The effect of initial cement stresses and interdigitation was also considered.

The Exeter stem demonstrated significant DIMM (p< 0.017). The FE model, accounting for sliding contact at the cement–implant interface was able to predict similar distal migration of the head and the tip. The results of both the calculations and the measurements showed that the femoral head moves medially, distally and posteriorly relative to the bone. In the cement mantle, maximum principal stresses were oriented circumferentially, minimum principal stresses were oriented radially. When the taper got engaged, submicroscopic movements which did not recover following unloading still took place and accumulated.

The results of the present study showed that it is possible to measure DIMM in the Exeter stem and combine this with FE modelling of the contact mechanism. Future studies will include various activities, such as walking or stair climbing. Based on accumulated submicroscopic movements, short-, mid- or long-term migration patterns will be predicted.

The long-term survival of total knee arthroplasty (TKA) has been well established; however, functional outcome remains inconsistent. More normal postoperative TKA kinematics have been shown to produce better knee function. Improved kinematics can be obtained by using implants with optimised surface geometry. Hence a TKA with an appropriate surface geometryis likely to provide superior long-term functional outcome. The Advance-Medial Pivot TKA (Wright Medical) is a fixed bearing prosthesis with a conforming medial compartment and a non-conforming (flat on flat) lateral compartment. This surface geometry is designed with the intention of replicating the normal knee motion of sliding or pivoting medially and rolling back laterally.

Aim: To investigate the sagittal plane kinematics of Advanced Medial Pivot Knee and compare with those of “flat on flat” fixed bearing TKA and normal knees

18 patients who had undergone primary TKA for osteoarthritis were recruited at an average of 18 months post operation. These patients performed flexion and extension exercises against gravity and a step up exercise. Video fluoroscopy of these activities was used to obtain the patellar tendon angle (PTA). This is a previously validated method for assessing sagittal plane kinematics of a knee joint. The kinematic profile of the Advance Medial Pivot Knee was compared to the profile of 14 normal knees and 30 flat on flat, fixed bearing TKA’s.

The sagittal plane kinematics of the Advance TKA differed from the normal knees. However, similarly to normal knees, a linear relationship was observed between PTA and knee flexion angle throughout knee flexion range. The kinematics of the Medial Pivot Knee were similar to normal when the knee was in a highly flexed position.

Functional plane kinematics of the Advance Medial Pivot TKA appear to meet the design criteria in that a linear relationship between PTA and flexion angle is maintained. Further work is required to establish if these improved sagittal plane kinematics translate into improved functional outcome.

Medial unicompartmental replacement (UKR) has been shown to have superior functional results to total knee replacement (TKR) in appropriately selected patients, and this has been associated with a resurgence of interest in the procedure. This may relate to evidence showing that the kinematic profile of UKR is similar to the normal knee, in comparison to TKR, which has abnormal kinematics. Concerns remain over the survivorship of UKR and work has suggested the anterior cruciate ligament (ACL) may become dysfunctional over time. Cruciate mechanism dysfunction would produce poor kinematics and instability providing a potential mechanism of failure for the UKR.

Aim: To test the hypothesis that the sagittal plane kinematics (and cruciate mechanism) of a fixed bearing medial UKR deteriorate over time (short to long term).

A cross sectional study was designed in which 24 patients who had undergone successful UKR were recruited and divided into early (2–5 years) and late (> 9 years) groups according to time since surgery. Patients performed flexion/extension against gravity, and a step up. Video fluoroscopy of these activities was used to obtain the Patellar Tendon Angle (PTA), the angle between the long axis of the tibia and the patella tendon, as a function of knee flexion. This is a previously validated method of assessing sagittal plane kinematics of a knee joint.

This work suggests the sagittal plane kinematics of a fixed bearing UKR is maintained in the long term. There is no evidence that the cruciate mechanism has failed at ten years. However, increased tibial bearing conformity from ‘dishing’, and adequate muscle control, cannot be ruled out as possible mechanisms for the satisfactory kinematics observed in the long term for this UKA.

Bone stock loss secondary to debris and mechanic alin-stability presents a challenge in revision hip arthroplasty. The aim of our study is to evaluate the clinical outcome of revision hip arthroplasty using the Oxford hip prosthesis combined with impaction allografting.

Between 1999 and 2002, we revised 72 hips in 69 patients using this technique (mean age 65years). Indications were aseptic loosening (56), infection (8), peri-prosthetic fracture (7) and a broken stem (1). The mean time to revision was 8.5 years (1–21years). Patients were assessed clinically and with the Oxford Hip Score (OHS) pre- and post-operatively. Fifty-seven patients also had acetabular revision. Four patients required femoral osteotomy to remove the old prosthesis. We used a mean of 1.8 (1–4) femoral heads per operation.

Patients were mobilised partially weight bearing (8weeks) followed by a gradual return to full loading. Complications included peri-operative femoral fracture (6), infection (6), dislocation (10), DVT (1)and PE (2). The average blood transfusion was 1.8 units (0–9). The OHS improved from 45 (26–58) pre-operatively to 24.3 post-operatively (12–43). No hip has been re-revised for aseptic loosening at a mean follow-up of 32.7months (16–51).

The Oxford hip is a trimodular prosthesis with a polished tapered metaphyseal section that is free to slide and rotate on the stem. The stem is first inserted uncemented into the diaphysis. Bone graft is impacted proximally, with mesh if necessary, and then the proximal wedge is cemented in. The wedge allows for some subsidence in the cement and creates optimal radial force transmission, which is essential for bone-remodelling stimulation and preventing proximal stress shielding. Although this is a short-term experience, we believe that the use of the tri-modular Oxford stem combined with minimal proximal impaction allografting is a reliable method of dealing with difficult revision femoral surgery. The results were comparable with a primary arthroplasty in terms of pain relief and functional results.

The purpose of the study: to determine if Patient height-and gender could be used to predict component size With a minimally invasiveapproach for unicompartmental knee replacement.

Material and methods: One hundred x-rays of patients (44 men, 56 women), who had undergone Oxford UKR, were reviewed. The preoperative radiographs were assessed for component size using the standard template. The postoperative x-rays were reviewed to determine-whether the ideal component size had been used or if not what could be the most appropriate. Patient’s height was recorded. The proportion of patients for whom an appropriate size could be selected by either template or height measurements was calculated.

Current templating system accurately predicted the ideal size in 67%. In no case was the size incorrect by more than one size. The following size bands were set according to height. For men: size small in patients less than160 cm, medium less than 170 cm and large less than 180cm. For women: size small in patients less than 165 cm, medium less than 175cm and large less than 185 cm. Height accurately predicted the ideal size in75%. In no case was the assessment of component size incorrect by more than one size.

As the Oxford femoral component is spherical, its size is not critical and it is acceptable to use one size too large or too small. Both height and templating safely predicted an acceptable size in all cases and predicted the ideal size in about 70% > Conclusion: Gender specific height should be used to predict the component size in situations were templating is difficult as in digital x-rays orsuperimposition of the two femoral condyles, and non-standardised x-raymagnification.

The indications for unicompartmental knee arthroplasty (UKA) remain controversial; in particular the threshold of disease in the patellofemoral compartment is debated. Whilst some authorities ignore the condition of the patellofemoral joint, others consider pre-existing patellofemoral osteoarthritis (PFOA) a contra-indication to UKA. The aim of this study was to determine the influence of PFOA on the outcome of medial UKA.

This prospective study involved one hundred consecutive patients who had undergone cemented medial Oxford UKA (phase 3), via a minimally invasive approach, at least one year previously. Patients were divided into two groups according to the presence or absence of full thickness cartilage loss (FTCL) on the patella or trochlea at operation. A pre-operative skyline radiograph was graded using the Altman score, by an independent Musculoskeletal Radiologist. Outcome was evaluated with the Knee Society Score (AKSS) and the Oxford Knee Score (OKS, maximum 48). Groups were compared for differences in knee score and Altman grade using a one way ANOVA. Repeat analysis was performed using the presence of anterior knee pain (AKP) as the group defining variable.

There were 28 patients with FTCL, and both groups were well matched for age, gender and activity levels. Analysis showed no significant difference in post operative knee scores between groups with either the presence of FTCL or the presence of AKP pre-operatively as a factor. There was no significant difference in Altman grade between groups.

Intra-operative evidence of PFOA in patients with medial compartment osteoarthritis does not prejudice the outcome of UKA. Even the inclusion of patients with symptomatic AKP, without necessarily having PFOA, does not affect the outcome after UKA. These short results are encouraging, but longer follow up is required.

Functional outcome after patellofemoral joint replacement (PFA) for osteoarthritis remains inconsistent. It is believed that functional outcome for joint replacement is dependent upon postoperative joint kinematics. Minimal disruption of the native joint, as in PFA, should produce more normal kinematics and improved outcome. No previous studies have examined joint kinematics after isolated PFA.

Aim: To investigate the sagittal plane kinematics of patellofemoral replacement and compare with the normal knee.

Twelve patients who had undergone successful PFA at least two years previously were recruited. Patients performed flexion/extension against gravity, and a step up. Video fluoroscopy of these activities was used to obtain the Patellar Tendon Angle (PTA), the angle between the long axis of the tibia and the patella tendon, as a function of knee flexion. This is a previously validated method of assessing sagittal plane kinematics of a knee joint. The kinematic profile of the PFA joints was compared to the profiles for fourteen normal knees.

Overall, the kinematic plot obtained for PFA reflected similar trends to that for normal knees; but the PTA was slightly but significantly increased throughout the entire range of flexion (two degrees). This is equivalent to an average displacement of the lower pole of the patella of 1.5mm.

Sagittal plane knee kinematics after PFA are much more normal than after TKR and this should give improved functional outcome. The observed increase in PTA through range may result from increased patella thickness or a shallow trochlear groove and may influence patellofemoral contact forces.

Objectives : To determine the change in passive knee kinematics after Oxford Unicompartment Arthoplasty (UKA) (Biomet, Uk); and to compare the change in kinematics post-operatively between image guided and the normal surgical procedure.

Background: In anteromedial osteoarthritis, only the medial compartment of the knee is affected and the collateral ligaments as well as the cruciate mechanism are intact. These preconditions make the knee suitable for UKA. The operative technique of the Oxford UKA theoretically allows the surge on to replicate the natural kinematics of the knee, due to accurate ligament balancing and fully congruent meniscal bearing design of the prosthesis. Our hypothesis was that no difference in tibiofemoral kinematics is observed after UKA. In addition we also hypothesised that the results of the image guided surgery would be the same as the normal surgical procedure.

Design/Methods: To test this hypothesis, we conducted a study using 13 normal human cadaveric knees. For kinematic analysis, the Surgetics TM surgical navigation system (Praxim, France), equipped with custom written tracking software, was used. Reference markers were mounted to the proximal tibia and the distal femur. In a standardized set-up, the knee was positioned in a leg holder and preoperative kinematics of the normal knee was recorded after a para-patellar mini-incision (70–90 mm). Joint kinematics were recorded during passive knee flexion and plotted against flexion angle. Oxford UKA was performed; the standard Phase III instrumentation was used for six knees and the image guided procedure was used for seven knees. The main difference between the standard and image guided procedures was that the inter-medullary rod was not used for the image guided surgery. After the operation postoperative kinematics were recorded using the same measurement protocol. All data were processed using Matlab 6.1 analysis software (The Math Works Inc., MA, USA). Preoperative and postoperative tibiofemoral kinematics were determined and compared. The mechanical axes of the tibia and femur were determined and kinematics represented as functions of knee flexion range. Over both the flexing and extending cycles of the knee the changes in tibiofemoral rotation (& #916;ROT), tibiofemoral ab/adduction (& #916;ABD), and distances between the origins of the mechanical axes (& #916;X, & #916;Y, & #916;Z) were calculated between pre and post-operative states.

Design/Methods: To test this hypothesis, we conducted a study using 13 normal human cadaveric knees. For kinematic analysis, the Surgetics TM surgical navigation system (Praxim, France), equipped with custom written tracking software, was used. Reference markers were mounted to the proximal tibia and the distal femur. In a standardized set-up, the knee was positioned in a leg holder and preoperative kinematics of the normal knee was recorded after a para-patellar mini-incision (70–90 mm). Joint kinematics were recorded during passive knee flexion and plotted against flexion angle. Oxford UKA was performed; the standard Phase III instrumentation was used for six knees and the image guided procedure was used for seven knees. The main difference between the standard and image guided procedures was that the inter-medullary rod was not used for the image guided surgery. After the operation postoperative kinematics were recorded using the same measurement protocol. All data were processed using Matlab 6.1 analysis software (The Math Works Inc., MA, USA). Preoperative and postoperative tibiofemoral kinematics were determined and compared. The mechanical axes of the tibia and femur were determined and kinematics represented as functions of knee flexion range. Over both the flexing and extending cycles of the knee the changes in tibiofemoral rotation (& #916;ROT), tibiofemoral ab/adduction (& #916;ABD), and distances between the origins of the mechanical axes (& #916;X, & #916;Y, & #916;Z) were calculated between pre and post-operative states.

Conclusions: The image guidance system used in our study is a valuable tool for assessing pre- and postoperative knee kinematics. Oxford Unicompartmental Knee Arthroplasty with the Phase III instrumentation in the presence of the cruciate mechanism reproduces the normal kinematics of the knee very accurately. The image guided procedure, performed without the inter-medullary rod, produced similar results to the standard surgery. Image guidance has a great potential for the assessment of pre- and post-replacement kinematics of the knee joint during surgery.

Oxford Unicompartmental knee arthroplasty (UKA) is now performed using a minimally invasive surgical (MIS) technique. Although early results are encouraging, the studies assessing outcome could be criticised for the restricted number of patients and limited follow-up. Aim of this study was to assess clinical outcome and prosthetic survival rate inpatients with minimally invasive Oxford medial UKA.

This prospective study assessed 500 consecutive patients, who underwent cemented Oxford UKA for medial OA using MIS technique. Patients were assessed using objective and functional Knee Society Score (KSS).

This study has confirmed preliminary findings that Oxford UKA using a minimally invasive approach is safe, reliable and effective.

Proprioception protects joints against injurious movements and is critical for joint stability maintenance under dynamic conditions. Knee replacement effect on proprioception in general remains elusive. This study aimed to evaluate the changes in proprioceptive performance after knee replacement; comparing Total (TKA) to Unicompartmental Knee Arthroplasty (UKA).

Thirty-four patients with osteoarthritis were recruited; 15 patients underwent TKA using the AGC prosthesis and 19patients underwent UKA using the Oxford prosthesis. Both cruciate ligaments were preserved in the UKA group, while only the PCL was preserved in TKA patients. Patients’ age was similar in both groups.> Joint Position Sense (JPS) and postural sway were used as measures of proprioception. Both groups were assessed pre- and 6 months post-operatively in both limbs. JPS was measured as the error in actively and passively reproducing five randomly ordered knee flexion angles between 30 and 70°using an isokinetic dynamometer. Postural sway (area and path) was measured during single leg stance using a Balance Performance Monitor. Functional outcome was assessed using the Oxford Knee Score (OKS).

Pre-operatively, no differences in JPS or sway were found between limbs in either group. No differences existed between the two groups. Post-operatively, both groups had significant improvement of JPS in the operated limb (UKA mean4.64°, SD1.44° and TKA mean5.18°, SD1.35°). No changes in JPS were seen in the control side. A significant improvement (P< 0.0001) in sway area and path was found in the UKA group only in both limbs. No significant changes in sway occurred in either limb of TKA patients. The OKS improved from 21.4 to 35.5 for TKA patients and from 23.9 to 38for UKA patients.

Both UKA and TKA improve proprioception as assessed by JPS. However, UKA alone improves postural sway in both limbs. This may impart explain why UKA patients function better than TKA patients

The Charnley Elite femoral component was first introduced in 1992 as a new design variant of the original Charnley femoral component (De Puy, Leeds, UK) with modified neck and stem geometry. The original component had undergone few changes in nearly forty years and has excellent long-term results. Early migration of the new stem design was determined by Roentgen Stereophotogrammetric Analysis (RSA)1. Rapid early migration of a component relative to the bone, measured by RSA, is predictive of subsequent aseptic loosening for a number of femoral stems. As there was rapid early migration and rotation of the Charnley Elite stem, we predicted that the long-term results would be poor. An outcome assessment is indicated as stems of this type are still being implanted.

One hundred Charnley Elite stems, implanted in our centre between 1994 and 1997 were included in a prospective, cross-sectional follow-up study. Outcome measures include validated clinical scores (Charnley hip score, Harris hip score and Oxford hip score) and radiological scores (Gruen classification) as well as revision rates over the past 10 years.

The clinical follow-up supports the RSA predictions of early failure of the Charnley Elite femoral stem.

Aim: To investigate the functional and radiological outcome of shelf acetabuloplasty in adults with significantly symptomatic acetabular dysplasia, with a minimum of a 5 year follow-up.

Material and Methods: 77 consecutive shelf procedures (68 patients) with an average follow-up of 10.9 years (range: 6–14) were reviewed. The Oxford hip score (OHS) was used for clinical assessment. Centre-edge angle (CEA) and acetabular angle (AA) were measured as indicators of joint containment. The severity of osteoarthiritis was based primarily on the extent of joint space narrowing. Survivorship analyses using conversion to THR as an endpoint were performed. Logrank tests were used to compare the survivorship of the shelf procedure against the variables of age, preoperative osteoarthiritis, pre and postoperative AA, CEA angles.

Results: The average age at time of surgery was 33 years (range: 17–60). At the time of the last follow-up, the mean OHS was 34.6 (maximum score: 48). Mean postoperative CEA was 55 (Pre-operatively: 13 degrees) while mean postoperative AA was 31 (Pre-operatively: 48 degrees). Thirty percent of hips needed THR at an average duration of 7.3 years. The survival in the 45 patients with only slight or no joint space narrowing was 97% (CI, 93%–100%) at 5 years and 80% (CI, 56%–100%) at 10 years. This was significantly higher (p= 0.0007) than the survival in the 32 patients with moderate or severe osteoarthiritis, which was 72% (CI, 55%–89%) at 5 years and 29% (CI, 13%–45%) at 10 years. There was no significant relationship between survival and age, pre and postoperative AA, CEA angles (p> 0.05).

Conclusion: Shelf-acetabuloplasty offers symptomatic relief to adults with acetabular dysplasia but overall deteriorates with time. About 50% of the patients do not need THR for over 10 years. Best results with shelf-acetabuloplasty were achieved in patients with slight or no joint narrowing.

Introduction: The design philosophy of polished tapered THR stems, such as the Exeter, intend for them to migrate distally within the cement mantle. In addition it is likely that micromotion occurs as a result of functional activity. The pattern of induced stresses will be a function of stem geometry & surface finish, as well as applied loading. Aim: To investigate the stresses induced in the cement mantle of a polished tapered THR stem during functional activity.

Method: Using Roentgen Stereophotogrammetric Analysis (RSA) dynamically induced micro-motion (DIMM) was measured in 21 patients implanted with Exeter stems. DIMM was measured as the difference in stem position in going from double to single leg stance on the operated limb. All subjects were measured 3 months post-operatively. A finite element (FE) model of the femur, including all muscles was used to investigate the stress distribution within the cement; contact was modelled with sliding elements allowing separation. The model was validated by comparison to the DIMM measurements.

Results: The Exeter stem demonstrated significant DIMM(p < 0.017), the average motions are given in the table below. The FE model, with sliding contacts was able to predict similar distal migration of the head. The peak minimum principal stress in the mantle was approx 33MPa and occurred in the proximal medial region. Movements occurred at the stem/cement interface.

Discussion and Conclusion: It is possible to measure DIMM in the Exeter stem and combining this with FE modelling the mechanism of stress transfer between the stem and mantle can be investigated in a manner that can be validated.

Hypothesis Stem surface finish & cement mantle conformity influences pressure at the stem/cement interface, under physiological load.

Method We developed a scaled mechanical analogue of a cemented Exeter femoral stem with a temperature and pressure controlled fluid environment. The stem was subjected to physiological torsional & axial loads using a material testing machine with two perpendicularly mounted actuators. Rough (Ra=2.2μm), matt (Ra=1.16μm) & polished (Ra=0.02μm) stems were tested in both conforming & artificially created, asymmetrically worn, cement mantles. Pressure was recorded at five sites along the interface.

Results Pressure was generated in both conforming and worn mantles. Peak pressures recorded in worn mantles were nearly four times greater than in conforming; peak stem tip pressures, worn: 12000Pa, versus conforming: 4680Pa. The axial load was the main determinant of pressure generation in the conforming mantle. Torsional loads generated a rise in interface pressure in both mantle types but the resultant stem toggle seen in the worn mantle had a significant positive effect on pressure. Pressure fluctuations generated in the conforming mantle had the greatest range at the tip. Peak pressures within the worn mantle were more uniform, but marginally greater on the posterior wall. Surface finish influenced pressure; surface roughness had a positive association with pressure within conforming mantles & the reverse effect in worn mantles.

Conclusion Asymmetrical wear leads to increased pressure generation at the stem/cement interface under physiological loads, with the torsional load playing a key part in pressure generation. Well fixed, debonded stems also generate limited pressure fluctuations at their mantle interface. This is principally due to axial load. Mantle shape dictates the influence of surface finish on pressure; surface roughness increases pressure within conforming mantles, but reduces pressure when the mantle is worn. This may be a confounding effect of worn mantle shape, restricting non-polished stem movement.

Introduction: Minimally invasive surgery (MIS) presents challenges in achieving alignment for unicompartmental knee arthroplasty (UKA). Aim: Development and assessment of an image guidance system for MIS implanted Oxford UKA.

Methods: The Surgetics platform which uses intra-operative data acquisition was chosen as the base system. Software was developed to determine height of tibial cut, image guidance of saws, alignment of components and assessment of ligament tension. The accuracy of component placement was assessed in vitro using matched pairs of knees randomised into navigated (NAV n=10) and standard manual (MAN n=10) procedures; standardised postoperative A-P and lateral radiographs were used. Pre and post-operative kinematics were assessed (NAV n=6, MAN n=7). The changes postoperatively over knee flexion and extension were calculated for tibiofemoral rotation (ΔROT) and ab/adduction (ΔABD).

Results: Accurate component placement was achieved with both methods without significant differences. Tibial cut height was more accurately in the NAV group (re-cut rate: NAV 33%, MAN 50%). NAV femoral component placement was as accurate as MAN with intramedullary rod. For the flexing cycle mean ΔROT was −0.06° (range 6.08° to −3.93°) and mean ΔABD was −0.04° (range 3.39° to −5.72°). There were no observable differences between the NAV and MAN kinematics. Overall, no observable differences were found between pre and post-operative kinematics.

Conclusions: Image guidance produces accurate placement through MIS approach and reduces the amount of tibial bone resection.

Introduction: Numerous studies in the orthopaedic literature have reported changes in knee kinematics following rupture of the Anterior Cruciate Ligament (ACL). Gait analysis is currently the preferred method for studying these in vivo kinematics. The accuracy of this method of analysis remains limited due to errors related to skin movement artefact. Most studies have therefore been limited to analysing subjects performing simple tasks such as straight-line walking, since results become increasingly inaccurate as the subject moves faster. Standard skin marker formats allow measurements of knee flexion angle and varus/valgus angles to be recorded relatively accurately during such tasks. Accurate measurements of rotations and translations at the knee joint, however, are not possible with these set-ups.

Aim: To produce a new method for interpretation of kinematic data from gait analysis, to allow accurate measurement of 3-D displacements at the knee joint during dynamic activity.

Method: We employed two different sets of skin markers in an attempt to increase the accuracy of our data, by diminishing the effects of skin movement. The Kabada¹ marker set was used with retroreflective spheres of 14.5mm diameter. This marker set was used to establish 3-D femoral and tibial co-ordinate systems. We then established a femoral and tibial co-ordinate centre within the distal femur and proximal tibia respectively. A second set of markers was used similar to the “point-cluster” method described by Andriacchi et al². This involved groups of eight smaller spheres (9.5mm diameter) placed in a non-uniform distribution on each of the thigh and shank segments. The positions of all these remaining markers, relative to the co-ordinate centres were then established. 15 subjects were then recorded while performing a series of running and cutting tasks. For each trial that was then analysed, we used all visible markers to optimize the recorded position of the tibial and femoral co-ordinate centres, using a method similar to that described by Soderkvist³. The displacements of these co-ordinate centres were then used to calculate the 3-D tibio-femoral kinematics. Reliability and repeatability tests suggest that this method produces results accurate to 3–4mm.

Conclusion: We believe we have developed a practical and accurate method to analyse 3-D joint kinematics from gait laboratory data.

Introduction: Knee joint arthroplasty (total or unicompartmental) is the standard operative treatment for osteoarthritis (OA). Survival rate is good for both types but functional outcome is different. The function of unicompartmental knee arthroplasty (UKA) is substantially better than that of total knee arthroplasty (TKA). As function can be strongly influenced by proprioceptive ability, it is possible that improved outcome seen in patients with UKA results from retaining proprioceptive function associated with the cruciate ligaments. This prospective longitudinal study aimed to evaluate the change in proprioceptive performance after knee replacement; comparing TKA to UKA.

Methods and Materials: Two groups of patients with OA as diagnosed clinically and by X-ray were recruited. Group 1 consisted of 15 patients (mean age 65.8 years range 57–72 years, 10 females and 5 males) listed for TKA with the AGC prosthesis (Biomet, UK). Group 2 consisted of 19 patients (mean age 65.5 years range 52–75 years; 9 females and 10 males) listed for UKA with the Oxford UKA (Biomet, UK) for medial compartment OA. The ACL and PCL were present and preserved in all patients in Group 2, while only the PCL was preserved in Group 1 patients. Joint Position Sense (JPS) and postural sway were used as measures of proprioception performance. Both groups were assessed pre-and 6 months post-operatively in both limbs. JPS was measured using a dynamometer (KinCom, Chatanooga Ltd) as the error in actively and passively reproducing five randomly ordered knee flexion angles (30°, 40°, 50°, 60° and 70°). Postural sway (area, path and velocity) was measured during single leg stance using a Balance Performance Monitor (SMS Medical) for 30 seconds interval. Functional outcome was assessed using the Oxford Knee Score (OKS).

Results: Pre-operatively, no differences in JPS or sway were found between limbs in either group. No differences existed between the two groups. Post-operatively, both groups had significant improvement of JPS in the operated limb only (Mean ± standard deviation for UKA 4.64±1.44° and for TKA 5.18±1.35°). No changes in JPS were seen in the control side. An improvement in sway was found in the UKA group only. UKA patients showed significant improvement in both sway area and path (p< .0001) for both limbs post-operatively. No significant post-operative changes in sway occurred in either limb of TKA patients. The OKS improved postoperatively in both groups, rising from 21.4 to 35.5 for TKA patients and from 23.9 to 38 for UKA patients.

Conclusion: Interestingly, joint position sense improved for both groups but did not seem to show any difference between UKA and TKA. Postural sway was influenced by joint replacement type. Ligament retention may contribute to improved global postural control seen after unicompartmental knee arthroplasty and may explain the higher level of function seen in these patients.

Purpose This study aims to investigate blood flow in the femoral head during Metal-on-Metal Hip Resurfacing (MMHR) through the posterior approach by monitoring oxygen concentration during the operative procedure.

Methods Following division of fascia lata, a calibrated gas-measuring electrode was inserted into the femoral neck, aiming for the anterolateral quadrant of the head. Baseline oxygen concentration levels were detected after electrode insertion 2–3cm below the femoral head surface and all intra-operative measures were referenced against these. Oxygen levels were continuously monitored throughout the operation. Results of measurements from ten patients are presented.

Results Oxygen concentration was reduced during the surgical approach and average oxygen concentration following dislocation and circumferential capsulotomy dropped to 43% of baseline (Std.dev +/−37%), this was a highly significant reduction (p< 0.005). Insertion of implants resulted in a further significant drop in oxygen concentration (p< 0.02) to 16% of baseline (Std. dev +/−27%). Oxygen concentration rose slightly after relocation of the resurfaced joint and reconstruction of posterior soft tissues, reaching 22% (Std.dev +/−31%) of initial baseline oxygen levels. Considerable variation between subjects was observed. Three subjects had no remaining oxygen concentration at the end of surgery.

Conclusion Intra-operative measurement of oxygen concentration in blood perfusing the femoral head is feasible. During MMHR there is a dramatic decrease in femoral oxygenation during surgical approach and implant fixation. This may increase the risk of avascular necrosis and subsequent femoral neck fracture. Future experiments will determine if less invasive procedures or a different approach can protect the blood supply to femoral neck and head.

Aims: The purpose of this study is to determine the causes of failed medial Oxford unicompartmental knee arthroplasty (UKA) and assess the outcome after revision surgery.

Materials And Methods: From 1993 to 2003, sixty-nine Oxford UKA (58 patients) were revised to a total knee replacements (TKR) at this centre. The type of implant used at revision surgery, pre- and post-revision American Knee Society (AKS) and Tegner scores were analyzed retrospectively.

Results: The patient’s mean age at the time of UKA was 64.5 years (range: 50–79). The average pre-revision scores were as follows: AKS-Objective score was 41.2 (± 10.4), the AKS-functional score was 56.8 (±10.0) and the average Tegner score was 1.5 (±0.6). The mean follow-up period was 38.3 (range: 12–107) months. The common causes of failure were: lateral compartment osteoarthritis (34.0%), component loosening (30.4%) and early or late infection requiring two-stage revision surgery (14.3%). The majority were revised using a standard primary TKR implant and only six (9%) requiring augmentation stems. Patellar resurfacing was performed in 25% of cases. The mean polyethylene liner width of the revision TKR was 13.4mm (±3.7). The average post-revision scores were: AKS-Objective score 77.4 (±13.1), the AKS-functional AKS score 70 (±21.1) and the average Tegner score of 2.2 (±0.8). Three knees needed rerevision for infection of the revised implant.

Conclusions: Lateral compartment osteoarthritis was the commonest indication for revision surgery for a failed medial Oxford UKA. Revision of a UKA is technically easier and the results are superior to the published results of revision of a primary TKR. In more than 90% cases, no augmentation or stemmed implants were necessary.

Introduction: The incidence of femoral neck fracture is approximately 2% after resurfacing hip replacement. Avascular necrosis is thought to be a contributory factor. The aim of this study was to investigate oxygen concentration in the femoral head during metal-on-metal hip resurfacing (MMHR).

Materials and Methods: In ten patients, following division of the fascia lata, a calibrated gas-measuring electrode was inserted into the supero-lateral quadrant of the femoral head via the femoral neck. Xsrays confirmed placement of the electrode 2-3 cms below the femoral head surface. Baseline oxygen concentration levels were recorded immediately upon electrode insertion and used as a reference for all intra-operative measures. Oxygen levels were monitored continuously throughout the operation.

Results: Oxygen concentration was reduced during the surgical approach and average oxygen concentration following dislocation and circumferential capsulotomy dropped significantly (p< 0.005) to 38% of baseline (SD=26%). Insertion of implants resulted in a further significant drop in oxygen concentration (p< 0.04) to 21% of baseline (SD=28%). Oxygen concentration rose slightly, but not significantly after relocation of the resurfaced joint and reconstruction of posterior soft tissues, reaching 22% of initial baseline oxygen levels. Considerable variation between subjects was observed.

Discussion: Intra-operative measurement of oxygen concentration in blood perfusing the femoral head is possible. During MMHR there is a dramatic decrease in femoral head oxygenation during surgical approach and implant fixation. This may increase the risk of avascular necrosis and subsequent femoral neck fracture. Future experiments will determine if a different surgical approach can protect the blood supply to the femoral head and neck. Measurements of femoral head oxygenation during metal-on-metal hip resurfacing demonstrated a significant concentration decrease during surgical approach and implant fixation.

Introduction: The indications for medial unicompartmental knee arthroplasty (UKA) remain controversial; in particular, those relating to the state of the patello-femoral joint (PFJ). Some authorities consider the presence of anterior knee pain (AKP) and/or full thickness cartilage loss (FTCL) to be a contraindication. The aim of this study was to determine the influence of patello-femoral problems on the outcome of medial UKA.

Materials and Methods: This prospective study involved one hundred knees with cemented medial Oxford UKA (phase 3), via a minimally invasive approach. Pre-operatively presence or absence of AKP was noted. The cartilage status of medial and lateral patello-femoral joint was grade and recorded intra-operatively. Outcome was evaluated at one-year with the Knee Society Score and the Oxford Knee Score (OKS).

Results: 54% of patients had pre-operative AKP. The clinical outcome at one year was not dependent on the presence or absence of pre-operative AKP [OKS: 40.2 (± 8.2) for patients without pre-op. AKP and OKS: 40.8 ((± 6.8) for patients with pre-operative AKP]. 35% of patients had FTCL seen at operation in the PFJ. The outcome at one year was independent of the state of the medial and/or lateral PFJ [OKS = 40.7 (± 7) with normal or partial thickness cartilage loss and OKS = 39.8 (± 7) with full thickness cartilage loss in PFJ]

Conclusions: These short-term results suggest that for the Oxford UKA the presence of anterior knee pain or full thickness cartilage damage in patello-femoral joint should not be considered to be a contraindication.

Introduction: Femoral neck failure due to avascular necrosis (AVN) is one of the most significant complications following resurfacing hip arthroplasty. It is likely that the surgical approach is one of the factors influenc-ing the development of AVN. Positron emission tomography (PET) is the only form of imaging that allows visualisation of bone metabolic activity deep to a metal surface.

Objectives: To establish the reliability and accuracy of PET using fluorine-18 to evaluate viability of the femoral head and neck after resurfacing hip arthroplasty. To assess the viability of ten proximal femora after Birmingham resurfacing hip arthroplasty via a modified lateral approach.

Design: A convenience case series of ten patients taken from the first fifteen from one orthopaedic surgeon’s experience of Birmingham resurfacing hip arthroplasty.

Setting: The PET unit of a major urban teaching hospital with a large academic orthopaedic department.

Participants: Patients that had undergone unilateral Birmingham resurfacing hip arthroplasty via a modified lateral approach were asked to volunteer for the study. The main criterion for inclusion was ease of attendance for imaging.

Intervention: Participants were given a single intravenous dose of 250MBq fluorine-18. After a period of 40 minutes uptake time, PET images of adjacent, sequential 10cm transverse sections including both acetabulae and proximal femora were obtained.

Main Outcome Measures: Images were reconstructed to allow relative quantification of uptake between operated and non-operated femoral heads and necks.

Results: PET imaging was successful in all subjects and demonstrated activity within the resurfaced femoral heads and femoral necks. No evidence of AVN was found.

Conclusions: Static positron emission tomography using fluorine-18 is an accurate and reliable method of assessing femoral head and neck viability after resurfacing hip arthroplasty. No evidence of avascular necrosis was found in this initial series of patients that had undergone Birmingham resurfacing hip arthroplasty via a modified lateral approach.

Introduction Polyethylene wear debris is an important cause of failure in cemented total hip arthroplasty. As a result of the biological response to debris at the bone-cement interface, osteolysis and subsequent failure occurs in both femoral and acetabular components. Most acetabular components and liners are made of ultra high molecular weight polyethylene (UHMWPE). Cross-linking UHMWPE has been shown to significantly reduce abrasive wear in hip simulator studies. The wear rates measured in vitro do not always correlate with the wear rates measured in clinical studies[1]. Some new polyethylenes have shown catastrophic wear in clinical studies despite encouraging hip simulator study results[2]. The aim of this study was to compare the wear of standard UHMWPE to that of cross-linked UHMWPE (Longevity, Zimmer, Warsaw, USA)

Patients and Methods This was a prospective, double blind, randomised control trial. 50 subjects were recruited, all of whom received the cemented CPT stem and uncemented Trilogy liner (Zimmer, UK). Subjects were randomised to receive either a standard Trilogy liner or a Longevity liner at the time of operation. Both liners are identical in appearance. All liners were of a neutral configuration. RSA was used to measure linear wear. This was calculated by measuring the distance between the centre of the femoral head and the centre of the acetabular liner. The preliminary results of the study are presented.

Results Both groups underwent significant wear over two years. The two year linear wear of the cross-linked UHMWPE was 0.3mm (+/− 0.06mm, p< 0.001). The two year linear wear of the standard UHMWPE was 0.39mm (+/− 0.04mm, p< 0.001). No significant difference existed between the two groups (p=0.24). Both cohorts had around 0.15 to 0.2 mm of measured wear per year. Cross-linked UHMWPE therefore underwent less wear than standard UHMWPE at two years, however this difference was not statistically significant.

Discussion This study suggests that Longevity UHMWPE has similar wear properties to standard UHMWPE in the first two years following implantation. This does not correlate with in vitro hip simulator studies of Longevity polyethylene, which show a significantly lower wear rate than standard UHMWPE. It suggests that hip simulator studies may be of little value in predicting in vivo wear rates and that all new types of polyethylene should be evaluated clinically and radiologically prior to general release. Whether both cohorts continue to wear at similar rates will only be revealed through continued observation.

Introduction This study assesses the outcome of medial unicompartmental knee arthroplasty (UKA) using the Oxford prosthesis for end-stage focal spontaneous osteonecrosis of the knee (SONK, Ahlback grades III & IV).

Methods A total of 29 knees (27 patients) with SONK were assessed using the Oxford Knee Score. Twenty-six had osteonecrosis of the medial femoral condyle; 3 had osteonecrosis of the medial tibial plateau. This group was compared to a similar group who had undergone Oxford Medial UKA for primary osteoarthritis. Patients were matched for age, sex and time since operation.

Results Mean length of follow-up was 5.2 years (range 1–13 years). There were no implant failures in either group, but there was one death 9 months post-arthroplasty from unrelated causes in the group with osteonecrosis. The mean Oxford Knee Score (SD) in the group with osteonecrosis was 37.8 (7.6) and 40.0 (6.6) in the group with osteoarthritis. There was no significant difference between the two groups using Student’s t-test (p=0.29).

Interpretation Use of the Oxford Medial UKA for focal spontaneous osteonecrosis of the knee is reliable in the short to medium term, and gives similar results to when used for patients with primary osteoarthritis.

Background: In anteromedial osteoarthritis, only the medial compartment of the knee is affected and the collateral ligaments as well as the cruciate mechanism are intact. These preconditions make the knee suitable for UKA. Our hypothesis was that no difference in tibiofemoral kinematics is observed after UKA. In addition we also hypothesised that the results of the image guided surgery would be the same as the normal surgical procedure.

Design/Methods: To test this hypothesis, we conducted a study using 13 normal human cadaveric knees. For kinematic analysis, the SurgeticsTM surgical navigation system (Praxim, France), equipped with custom written tracking software, was used. Reference markers were mounted to the proximal tibia and the distal femur. In a standardised set-up, the knee was positioned in a leg holder and preoperative kinematics of the normal knee was recorded after a para-patellar mini-incision . Joint kinematics were recorded during passive knee flexion and plotted against flexion angle. Oxford UKA was performed; the standard Phase III instrumentation was used for six knees and the image guided procedure was used for seven knees. After the operation postoperative kinematics were recorded using the same measurement protocol. All data were processed using Matlab 6.1 analysis software (The MathWorks Inc., MA, USA). Preoperative and postoperative tibiofemoral kinematics were determined and compared. The mechanical axes of the tibia and femur were determined and kinematics represented as functions of knee flexion range. Over both the flexing and extending cycles of the knee the changes in tibiofemoral rotation (ΔROT), tibiofemoral ab/adduction (ΔABD), and distances between the origins of the mechanical axes (ΔX, ΔY, ΔZ) were calculated between pre and post-operative states.

Results: The mean differences between pre- and postoperative kinematics for all cases are given as the mean and range in parentheses. For the flexing cycle was ΔROT −0.06 (6.08 to −3.93) degrees, ΔABD was −0.04 (3.39 to −5.72) degrees, ΔX was 0.69 (2.69 to −1.84) mm, ΔY was −0.22 (4.13 to −3.41) mm and was ΔZ 0.27 (4.09 to −1.47) mm. For the extending cycle was ΔROT 0.1 (5.87 to −3.61) degrees, ΔABD was −0.06 (5.72 to −5.95) degrees, ΔX was 0.35 (2.73 to −2.39) mm, ΔY was −0.39 (5.58 to −3.08) mm and was ΔZ 0.21 (3.77 to −1.12) mm. There were no observable differences between the standard and image guided changes in kinematics. Overall, no observable differences were found between pre and post-operative kinematics.

Conclusions: The image guidance system used in our study is a valuable tool for assessing pre- and postoperative knee kinematics. Oxford Unicompartmental Knee Arthroplasty with the Phase III instrumentation in the presence of the cruciate mechanism reproduces the normal kinematics of the knee very accurately.

Introduction Metal-on-Metal Hip Resurfacing (MMHR) has been established as a successful alternative to Total Hip Replacement (THR). However, several series report a 2 % incidence of early femoral neck fractures. Avascular necrosis (AVN) was considered to be responsible for the majority of observed fractures, raising concerns about the femoral head blood supply during MMHR. This study aims to further understand the mechanisms of femoral blood flow restriction by monitoring gas levels (O2) during the operative procedure.

Methods Patients undergoing MMHR using the posterior approach were evaluated. Following division of fascia lata, a guide wire was introduced up the femoral neck, aiming for the anterosuperior quadrant of the head. It was then removed. A calibrated gas-measuring electrode was inserted in the created bone channel. X-ray confirmation was obtained to ensure that the active measurement area of the electrode was 2–3cm below the femoral surface. O2 and N2O levels were then continuously monitored throughout the operation.

Results A preliminary analysis of four patients is presented: Stable N2O- measurements throughout the procedure confirmed valid electrode measurements. Baseline oxygen concentration levels of 40%– 60% were detected before division of short rotators. After hip dislocation oxygen concentration dropped in all patients to levels ranging between 0% and 5%. Oxygen concentration was found to remain depressed at these levels throughout the entire operation in three patients. Recovery of O2 concentration to baseline levels was observed in one patient 15 minutes after dislocation.

Discussion In three patients the extended posterior approach and joint dislocation had a dramatic effect on the perfusion in the femoral head. These patients have a high risk for development of AVN and potential femoral neck fracture. Whilst the results require further verification, subsequent experiments will determine if less invasive procedures or specific positioning of the limb can protect the femoral blood supply.

Introduction: The Charnley Elite femoral component was first introduced in 1992 as a new design variant of the original Charnley femoral component (De Puy, Leeds, UK) with modified neck and stem geometry. The original component had undergone few changes in nearly forty years and has excellent long-term results.

Early migration of the new stem design was determined by Roentgen Stereophotogrammetric Analysis (RSA). Rapid early migration of a component relative to the bone, measured by RSA, is predictive of subsequent aseptic loosening for a number of femoral stems. As there was rapid early migration and rotation of the Charnley Elite stem, we predicted that the long-term results would be poor. An outcome assessment is required as stems of this type are still being implanted.

Materials and method: One hundred Charnley Elite stems, implanted in our centre between 1994 and 1997 were included in a prospective, cross-sectional follow-up study. Outcome measures include validated clinical scores (Charnley hip score, Harris hip score and Oxford hip score) and radiological scores (Gruen classification) as well as revision rates over the past 10 years.

Results: The preliminary analysis results are given. The mean time to follow-up was 8.28 years. 20 patients have died due to causes unrelated to their operations. 10 patients had stem revisions: 9 for aseptic loosening and 1 for a peri-prosthetic fracture. This indicates a significant 10% failure rate of the prosthesis in less than 10 years.

Preliminary clinical scores in the patients who had not undergone any subsequent surgery were adequate (Oxford Hip Score mean average of 23.9).

Thirteen percent of radiographs analysed had evidence of loosening, giving an overall loosening rate of 14% at 8 years.

Discussion and conclusion: The clinical follow-up supports the RSA predictions of early failure of the Charnley Elite femoral stem.

Background: Hip dysplasia is a complex developmental process. Untreated acetabular dysplasia is the most common cause of secondary hip osteoarthiritis. With increased interest in redirectional pelvic osteotomies, the role of the shelf procedure needs to be re-defined.

Aim of the study: to investigate the effectiveness of the shelf procedure in adults with symptomatic acetabular dysplasia by assessing the functional and radiological outcome at a minimum of five years follow-up.

Material and Methods: Seventy-six consecutive adults with symptomatic acetabular dysplasia treated with acetabular shelf augmentation, have been followed up for an average period of 11 years (range: 6–14). The mean age was thirty-three years (range: 17–60 years). The Oxford hip score (OHS) was used for clinical assessment. Centre-edge angle (CEA) and acetabular angle (AA) were measured to determine femoral head coverage. Osteoarthiritis severity was based primarily on the width of the joint space using the De Mourgues classification. Survivorship analyses using conversion to THR as an endpoint were performed. logrank test was used to compare the outcome of the shelf against the variables of age, preoperative osteoarthiritis, preoperative and postoperative AA, CEA angles.

Results: The shelf procedure improved the mean preoperative CEA from 11° (range: 20° to 17°) to 50° postoperatively (range: 30° to 70°) and the mean preoperative AA from 52° (range: 46° to 64°) to 32° postoperatively (range: 18° to 57°). The Mean OHS was 34.6 (hip score maximum: 48). Thirty percent of hips needed THR at an average duration of 7.3 years. Survival analysis using conversion to THR as an endpoint was 86% (CI, 76%–95%) at five years and 46% (CI, 27%–65%) at ten years. The survival in the 44 patients with only slight or no joint space narrowing was 97% (CI, 93%–100%) at 5 years and 75% (CI, 51%–100%) at 10 years. This was significantly higher (p= 0.0007) than the survival in the 32 patients with moderate or severe osteoarthiritis, which was 76% (CI, 55%–89%) at 5 years and 22% (CI, 5%–38%) at 10 years. There was no significant relationship between survival and age (p= 0.37), pre and postoperative centre-edge angle (p= 0.39), or acetabular angle (p= 0.85).

Conclusion: Shelf acetabuloplasty is a reliable, safe procedure offering medium-term symptomatic relief for adults with acetabular dysplasia. The best results were achieved in patients with slight or no joint space narrowing.

Introduction: With a minimally invasive approach for unicompartmental knee replacement (UKA), it is difficult to determine the femoral component size intra-operatively. It can be difficult to template pre-operative radiographs due to superimposition of the two femoral condyles, and non-standardised x-ray magnification.

Aim: The purpose of the study was to find an easy, reliable, alternative method for this assessment such as height and gender.

Material and methods: One hundred x-rays of patients (44 men, 56 women), who had undergone Oxford UKR, were reviewed. Preoperative radiographs were templated, and postoperative x-rays were reviewed to determine the ideal component size. Patient’s height was recorded. The proportion of patients for whom an appropriate size could be selected by either template or height measurements was calculated.

Results: Current templating system accurately predicted the ideal size in 67 patients. The following size bands were set according to height. For men: size small in patients less than160 cm, medium less than 170 cm and large less than 180 cm. For women: size small in patients less than 164 cm, medium less than 174 cm and large less than 184 cm. Height accurately predicted the ideal size in 75 patients. In no case was the assessment of component size incorrect by more than one size.

Conclusion: Gender specific height safely predicted the ideal component size in 75 percent of patients undergoing UKA. Component size can be determined satisfactorily from patient height and gender and can be used as adjunct to existing templating method.

Introduction: The indications for unicompartmental knee arthroplasty (UKA) remain controversial; in particular, the threshold of disease in the patellofemoral compartment is debated. Whilst some authorities ignore the condition of the patellofemoral joint, others consider pre-existing patellofemoral osteoarthritis (PFOA) a contraindication to UKA. The aim of this study was to determine the influence of PFOA on the outcome of medial UKA.

Methodology: This prospective study involved one hundred consecutive patients who had undergone cemented medial Oxford UKA (phase 3), via a minimally invasive approach, at least one year previously. Patients were divided into two groups according to the presence or absence of full thickness cartilage loss (FTCL) on the patella or trochlea at operation. Outcome was evaluated with the Knee Society Score (AKSS) and the Oxford Knee Score (OKS, maximum 48). Groups were compared for differences in knee score and intra-operative cartilage status of PFJ using a one way ANOVA. Repeat analysis was performed using the presence of anterior knee pain (AKP) as the group defining variable.

Results: There were 35 patients with FTCL and 65 without. Both groups were well matched for age, gender and activity levels. No significant difference in post operative knee scores existed between groups for the pre-operative presence of FTCL (OKS = 40 in both groups). Similar, non significant, results were found when the pre-operative presence of AKP was used as a group defining factor (OKS 40 Vs 39). The study was sufficiently powered to avoid type II error.

Conclusion: Intra-operative evidence of PFOA in patients with medial compartment osteoarthritis does not prejudice the outcome of UKA at one year. Moreover, the inclusion of patients with symptomatic AKP (with or without concurrent PFOA) also appears not to influence the outcome after UKA.

Introduction: Total knee replacement (TKR) is a common treatment for end stage osteoarthritis of knee. The best knee replacement is one in which the kinematics of the normal knee are reproduced. Amongst several factors affecting kinematics, variation in surface geometry and the retention/ sacrifice of the PCL are considered especially important. It is not known which of these two factors is most influential for establishing optimum joint kinematics after TKR.

Method: Four groups of patients who had undergone TKR at least one year previously were recruited. Two groups of patients had undergone replacement with a single axis design (Scorpio, Stryker Howmedica) in both PCL retaining (Scorpio CR, n=15) and PCL sacrificing (Scorpio CS, n=15) variants. The other two groups had undergone replacement with the traditional polyradial design prosthesis (Sigma, Depuy, Johnson & Johnson), again with both PCL retaining (Sigma CR, n=14) and PCL sacrificing (Sigma CS, n=13) variants. An in-vivo fluoroscopic analysis was carried out on all patients. Patients were asked to perform closed chain step up and open chain extension and flexion against gravity. The kinematic profile of each knee was obtained by measuring patella tendon angle (PTA) at specific angles of knee flexion (KFA) using an established fluoroscopic method. The data was also compared with the kinematic profile of normal knees. American Knee Society, Oxford and Patella Scores were recorded for all patients.

Results: All groups were comparable in terms of age and gender. In addition, no significant difference was found between groups in clinical outcome. PTA results for a step-up exercise are shown in the figure. A one way ANOVA between groups revealed that knee kinematics after total knee replacement is different to that for normal knees. No differences were found between groups when the data was analysed using CR/CS as the independent variable. The only differences between groups were found when surface geometry was used as the independent variable. It was shown that the kinematic profile of the single axis Scorpio design (in both CR & CS ) was closer to normal, especially near extension, than the traditional polyradial design (Sigma CR & CS).

Conclusions: Kinematics after a total knee replacement differ from that for a normal knee. Differences in surface design between knee replacements appear to have greater influence on kinematics than the presence or absence of the PCL.

Introduction and Aims: Since existing data relating to the kinematics of ACL-deficient knee joints relates mainly to walking, the kinematics during more dynamic activities remains unknown; therefore, the aim of this unique study was to describe in vivo ACL-deficient knee kinematics and muscle activity during running and cutting.

Method: Fifteen subjects with proven unilateral ACL rupture were measured performing running and cutting tasks prior to surgical reconstruction. Gait analysis was used to determine inter-limb differences in displacements at the knee joint during stance phase. Simultaneous EMG analysis was performed to give temporal measures of lower limb muscle activity.

Results: No significant inter-limb difference was seen for tibio-femoral translation in the sagittal or coronal planes during any part of stance phase. The ACLD limb showed a significantly reduced maximum knee flexion angle (40.4 vs. 44.0 degrees) compared to the ACL-intact (ACLI) limb (p=0.04). Internal tibial rotation was significantly greater (7.3 vs. 0.7 degrees) in the ACLD limb at toe-off (p=0.03). The quadriceps muscle group was found to be active for a significantly greater percentage of stance phase in the ACLD limb compared to the ACLI limb (p=0.001).

Conclusion: The ACL-deficient gait involves consistently greater knee extensor activity than ACL-intact gait during running, and as a consequence maximum knee flexion angle is reduced. These findings contrast with the description of ‘quadriceps-avoidance’ gait often described for ACL-deficient subjects. ACL-deficient gait also demonstrates increased rotational instability during terminal stance phase.

Introduction and Aims: Single compartmental replacement procedures are increasingly preferred over total knee replacement (TKR) for single compartment osteoarthritis of the knee joint. Theoretically, reduced disruption of the native joint should produce more normal kinematics. This study aimed to describe and compare the sagittal plane kinematics of four different, commonly used devices.

Method: Four groups of patients who had undergone successful single compartment replacement at least two years previously were recruited. Fifteen following Oxford medial UKA, 12 following medial St Georg Sled UKA, five following Oxford lateral UKA, and 12 following Avon PFJ replacement. Patients performed flexion/extension against gravity, and a step-up during video fluoroscopy. The Patellar Tendon Angle (PTA), the angle between the long axis of the tibia and the patella tendon, was obtained as a function of knee flexion. This relationship provides indication of sagittal movement between femur and tibia through range and has been validated as a reliable measure of joint kinematics.

Results: The kinematic profile for each group was compared to that of the profile for 12 normal and 30 TKR (AGC) knees. All three tibiofemoral devices produced knee kinematics similar to the normal knee. The PTA was found to have a linear relationship to flexion angle, decreasing with increasing knee flexion angle. No such linear relationship exists for the TKR joint, which display abnormal kinematics. The PF device also reflected similar trends to that for normal knees except that the PTA was moderately increased throughout the entire range of flexion (three degrees).

Conclusion: In contrast to TKR, all single compartmental knee replacements provided kinematics similar to the normal joint. The kinematic pattern of the PFJ replacement may be of most interest as the observed increase in PTA through range could influence patello-femoral contact forces

We followed up 76 consecutive hips with symptomatic acetabular dysplasia treated by acetabular shelf augmentation for a mean period of 11 years. Survival analysis using conversion to hip replacement as an end-point was 86% at five years and 46% at ten years. Forty-four hips with slight or no narrowing of the joint space pre-operatively had a survival of 97% at five and 75% at ten years. This was significantly higher (p = 0.0007) than that of the 32 hips with moderate or severe narrowing of the joint-space, which was 76% at five and 22% at ten years. There was no significant relationship between survival and age (p = 0.37) or the pre- and post-operative centre-edge (p = 0.39) and acetabular angles (p = 0.85).

Shelf acetabuloplasty is a reliable, safe procedure offering medium-term symptomatic relief for adults with acetabular dysplasia. The best results were achieved in patients with mild and moderate dysplasia of the hip with little arthritis.

Introduction: The Birmingham Hip Resurfacing (BHR) is a metal on metal prosthesis with no published independent clinical studies. It is increasingly used as an alternative to stemmed prostheses in younger patients.

This study presents the 2 year migration results of the BHR femoral component using Roentgen Stereophoto-grammteric Analysis (RSA).

Methods: 26 hips in 24 subjects underwent a BHR, through the postero-lateral approach using CMW3G cement. RSA marker balls were placed in the cortical bone of the femur intra-operatively. The femoral component migration was measured at intervals of 3, 6, 12 and 24 months postoperatively using the Oxford RSA system. The implants were un-modified, geometric algorithms were used to identify the femoral component.

Results: The BHR femoral component showed no significant displacement from its immediate post-operative position. All components of migration showed no significant displacement in any direction, at 1 or 2 years.

Conclusion: The BHR femoral component does not migrate significantly within the first two post-operative years. Its’ migration compares favourably to other designs of femoral component. The BHR is therefore likely to remain stable in the future, as the majority of implant migration occurs within the first two years.

Introduction and Aims Unicompartmental knee arthroplasty (UKA) is appropriate for one in three osteoarthritic knees requiring replacement. An accelerated protocol enables patients undergoing UKA to be discharged within 24 hours of surgery. Before such an approach is universally accepted it must be safe, effective and economically viable. A study was performed to compare the new accelerated protocol with current standard care in a state healthcare system.

Method A single blind RCT design was used. Patients eligible for UKA were screened for NSAID tolerance, social circumstances and geographical location before allocation to either an accelerated recovery group (Group A) or a standard non accelerated group (Group S). The accelerated protocol included dedicated pain management and discharge support. Primary outcome was the Oxford Knee Assessment at 6 months post operation, compared using independent t tests. Pain, range of movement and incidence of complications were also recorded by assessors blind to group allocation. Cost effectiveness was calculated in quality life adjusted years (QLAY) using the Euroqual instrument. The study power was sufficient to avoid type 2 errors. The study was supported by a NHS Regional R& D grant.

Results Forty one patients (21 group A, 20 group S) were included. Groups had comparable age and patient profiles. Average discharge time was 37 hours (1.5 days) for group A and 114 hours (4.3 days) for group S. Pain on hospital discharge was similar for both groups. No significant difference was found between groups for pain or range of movement at any time, although patients in group S regained pre-operative flexion faster than group A. One major complication occurred in each group; one infection (group S) and one manipulation for poor movement (group A). The cost per QLAY for the new protocol was 59% of the standard care.

Conclusion The new protocol allows for safe accelerated discharge from hospital after UKA. The approach is cost effective and should help to increase the throughput of patients who require knee replacement.

Introduction: Unicompartmental knee arthroplasty (UKA) is an increasingly popular procedure for young osteoarthritic patients whose age and activity levels preclude the use of a total knee arthroplasty (TKA). However, successful reconstruction using an unconstrained mobile bearing implant requires an intact and functioning ACL. Patients with isolated medial compartment OA and an absent ACL therefore provide a management dilemma for the treating surgeon. One option is to perform a combined ACL reconstruction and mobile bearing UKA. This paper presents early results of this new procedure using an Oxford UKA and ACL reconstruction using an autograft.

Materials and Methods: Eleven patients who underwent one or two-staged ACL reconstruction and Oxford UKA for treatment of symptomatic medial compartment OA were reviewed at one year after surgery. The combined procedure required specific precautions and considerations; care had to be taken to place the tibial tunnel as far laterally as possible to avoid impingement of the graft by the tibial implant. Also, the presence of a posteromedial, rather than an anteromedial cartilage defect has the potential to reduce accuracy for placement of the initial tibial cut.

Results: All patients were male with an average age of 49 years (range: 36 – 52) and mean follow up of 1.3 years. One patient needed revision to TKA due to infection. The objective and functional knee society scores improved pre to post operatively from 55 to 98, and 85 to 100, respectively.

Conclusions: ACL reconstruction and simultaneous or staged UKA is a viable treatment option for patients with symptomatic medial compartment arthritis in whom the ACL is absent. Early results of this technically demanding procedure are encouraging but longer follow-up is required.

Purpose of the study Function is strongly infl uenced by proprioceptive ability, this prospective longitudinal study aimed to evaluate the change in proprioceptive performance after knee replacement; comparing total to unicompartment replacement.

Methods and Results Two groups of patients with OA as diagnosed clinically and by X-ray were recruited. Group 1 consisted of 15 patients (mean age 65.8yrs range 57-72yrs, 10 females & 5 males) listed for Total Knee Arthroplasty (TKA) with the AGC (Biomet, UK). Group 2 consisted of 19 patients (mean age 65.5yrs range 52–75yrs; 9 females & 10 males) listed for Oxford Uni-compartmental Knee Arthroplasty (OUKA) for medial compartment OA. The ACL and PCL were present and preserved in all patients in Group 2, while only the PCL was preserved for Group 1 patients.

Joint Position Sense (JPS) & sway were used as measures of proprioception performance. Both groups were assessed pre- and 6 months post-op. JPS was measured using an isokinetic dynamometer (KinCom, Chatanooga Ltd) as the error in actively and passively reproducing fi ve randomly ordered knee fl exion angles (30°, 40°, 50°, 60° and 70°). Sway (area, path and velocity) was measured during single leg stance using a Balance Performance Monitor (SMS Medical) for 30-second interval. Functional outcome was assessed using the Oxford Knee Score (OKS).

Pre-operatively, no differences in JPS or sway were found between limbs in either group. No differences existed between the two groups.

Post-operatively, both groups had signifi cant improvement of JPS in the operated limb only (Mean ± standard deviation for UKA 4.64±1.44° and for TKA 5.18±1.35°). No changes in JPS were seen in the control side. Group 2 patients showed signifi cant improvement in both sway area and path (p< .0001) for both limbs post-operatively. No signifi cant post-operative changes in sway occurred in either limb of Group 1 patients.

The OKS improved post-operatively in both groups, rising from 21.4 to 35.5 for Group 1 patients and from 23.9 to 38 for Group 2 patients.

Conclusion Interestingly, joint position sense improved for both groups but did not seem to show any difference between UKA and TKA. Postural sway was infl uenced by joint replacement type. Ligament retention may contribute to improved global postural control seen after unicompartmental knee arthroplasty and may explain the higher level of function seen in these patients.

Introduction and Aims A randomised controlled trial (RCT) and a multi-centre unilateral cohort study were performed as part of the stepwise introduction of a new mobile bearing knee. The aim was to ensure that outcome for the new device was at least as good as that for an established fixed bearing device. This paper presents three year follow up of the published one year results. Instability and prevalence of “clicking” from the joint were examined in detail.

Method 1. A multi-centre RCT of patients undergoing bilateral knee replacement compared functional outcome between two different prostheses, the new mobile bearing device (TMK) and an established fixed bearing device (AGC). 2. A separate multi-centre cohort of 166 patients who had undergone a unilateral mobile bearing procedure at least six months previously was used to assess complication rate and corroborate any findings from the bilateral trial. Outcome measures included Oxford Knee Scores, American Knee Society ratings and complication rate.

Results The bilateral trial revealed no significant differences in outcome between the two devices. Revision rate for all (199) mobile bearing knees was less than 2%. The mean Oxford Knee Score for outcome for all mobile bearing knees was 37.1 ± 10.1. About 7% of patients reported instability. Clicking was more common in the TMK (48%) than in the AGC (30%) and was reported as a problem in 16% of TMK’s in the cohort study. However, clicking was unrelated to outcome score in both studies.

Conclusion At three years, the mobile bearing device was as good as the fixed bearing device. There was a relatively high prevalence of “clicking” in the TMK but the cause remains unclear. Furthermore, the symptom was not associated with poor functional outcome. The bilateral RCT and cohort study allows assessment of function and potential problems. It provides rigourous scientific justification for the introduction and early assessment of new implants.

Aim: To investigate the functional and radiological outcome of shelf acetabuloplasty in adults with significantly symptomatic acetabular dysplasia, with a minimum of a 5 year follow-up.

Material and Methods: 77 consecutive shelf procedures (68 patients) with an average follow-up of 10.9 years (range: 6–17) were reviewed. The Oxford hip score (OHS) was used for clinical assessment. Centre-edge angle (CEA) and acetabular angle (AA) were measured as indicators of joint containment. The severity of osteoarthiritis was based primarily on the extent of joint space narrowing. Survivorship analyses using conversion to THR as an endpoint were performed. Logrank tests were used to compare the survivorship of the shelf procedure against the variables of age, preoperative osteoarthiritis, pre and postoperative AA, CEA angles.

Results: The average age at time of surgery was 33 years (range: 17–60). At the time of the last follow-up, the mean OHS was 34.6 (maximum score: 48). Mean postoperative CEA was 55 (Pre-operatively: 13 degrees) while mean postoperative AA was 31 (Pre-operatively: 48 degrees). Thirty percent of hips needed THR at an average duration of 7.3 years. The survival in the 45 patients with only slight or no joint space narrowing was 97% (CI, 93%-100%) at 5 years and 75% (CI, 51%-100%) at 10 years. This was significantly higher (p≤= 0.0007) than the survival in the 32 patients with moderate or severe osteoarthiritis, which was 76% (CI, 55%-89%) at 5 years and 22% (CI, 5%-38%) at 10 years. There was no significant relationship between survival and age, pre and postoperative AA, CEA angles (p> 0.05).

Conclusion: Shelf-acetabuloplasty offers symptomatic relief to adults with acetabular dysplasia but overall deteriorates with time. About 50% of the patients do not need THR for over 10 years. Best results with shelf-acetabuloplasty were achieved in patients with slight or no joint narrowing.

Purpose of the study: To evaluate the clinical outcome of revision total hip arthroplasty (THA) using the Oxford Hip prosthesis combined with impaction allografting. Methods and results: The Oxford hip is a trimodular prosthesis with a polished tapered metaphyseal section that is free to slide on the stem. The stem is inserted uncemented into the diaphysis, bone graft is impacted proximally, with mesh if necessary, and then the proximal wedge is cemented in.

Between 1999 and 2002, we revised 72 hips in 69 patients using this technique (mean age 65years, 28 to 88). Fifty-six cases had aseptic loosening, 8 had infection (2 stages), 7 had peri-prosthetic fractures and 1 had a broken stem. The mean time to revision was 8.5years (1 to 21). Patients were assessed clinically and with the Oxford Hip Score (OHS) pre- and post-operatively. Fifty-seven patients also had acetabular revision. Four patients required femoral osteotomy to remove the old prosthesis. We used a mean of 1.8 (1 to 4) femoral heads per operation.

Complications included 6 peri-operative femoral fractures diagnosed at operation and fixed successfully, 6 infections, 10 dislocations (2 were recurrent), one deep vein thrombosis, 2 pulmonary embolism and one gastrointestinal haemorrhage. The average blood transfusion was 1.8 units (0 to 9).

The OHS improved from 45 (26 to 58) pre-operatively to 24.3 post-operatively (12 to 43). No hip has been re-revised for aseptic loosening at a mean follow-up of 32.7 months (16 to 51).

Conclusion: Although we accept that this is only a preliminary experience, we believe that the use of the trimodular Oxford stem combined with minimal proximal impaction allografting was found to be a reliable method and a successful way of dealing with revision femoral surgery. The results were comparable with a primary arthroplasty in terms of pain relief and functional results

There is an increasing interest amongst surgeons and demand from patients for hip resurfacing. One concern regarding resurfacing is the incidence of femoral neck fracture post operatively. McMinn and Treacy report an incidence of 0.4% in their series, our finding was of an incidence of over four times as high (1.9%). We looked at our database of hip resurfacings and tried to identify the risk factors for fracture.

We identified 11 fractures and compared these with 22 controls selected by choosing the cases performed by the surgeon immediately before and after the fracture case. We analysed their medical notes and x-rays. Statistical analysis was performed using a package in ™Excel. The implants were either Birmingham Hip (Midland Medical Technologies) or Cormet (Corin) resurfacings.

No statistically significant correlation was found for sex, age or body mass index. We found that fracture was twice as likely in the presence of possible or probable osteopenia. We did not find that fracture was more likely to occur in patients with a previous diagnosis of Perthes, DDH, SUFE and avascular necrosis (AVN).

We found patients with a superior overhang of the femoral component on the neck did not risk fracture, however we could not demonstrate that notching in itself increased the risk of fracture.

There was no correlation with neck-shaft and stem-shaft angle or neck lengthening and offset and subsequent neck fracture.

In 13 bilateral cases there was fracture in 3 (incidence 23%). Apart from one fracture that occurred at 18 weeks post-operatively all the others occurred before eight weeks. Five fractures occurred in patients who subsequently on histological analysis were found to have avascular necrosis.

We conclude that bilateral surgery is probably unwise. That a superior overhang seems to protect against fracture as long as this is not at the expense of creating an inferior notch. Finally, we find AVN in a number of retrieved heads, what is the true incidence of AVN and does the approach adopted cause the avascular process and if so why do we see so few fractures?