Aims. It is unknown whether gap laxities measured in robotic arm-assisted total knee arthroplasty (TKA) correlate to load sensor measurements. The aim of this study was to determine whether symmetry of the maximum medial and lateral gaps in extension and flexion was predictive of knee balance in extension and flexion respectively using different maximum thresholds of intercompartmental load difference (ICLD) to define balance. Methods. A prospective cohort study of 165 patients undergoing functionally-aligned TKA was performed (176 TKAs). With trial components in situ, medial and lateral extension and flexion gaps were measured using robotic navigation while applying valgus and varus forces. The ICLD between medial and lateral compartments was measured in extension and flexion with the load sensor. The null hypothesis was that stressed gap symmetry would not correlate directly with sensor-defined soft tissue balance. Results. In TKAs with a stressed medial-lateral gap difference of ≤1 mm, 147 (89%) had an ICLD of ≤15 lb in extension, and 112 (84%) had an ICLD of ≤ 15 lb in flexion; 157 (95%) had an ICLD ≤ 30 lb in extension, and 126 (94%) had an ICLD ≤ 30 lb in flexion; and 165 (100%) had an ICLD ≤ 60 lb in extension, and 133 (99%) had an ICLD ≤ 60 lb in flexion. With a 0 mm difference between the medial and lateral stressed gaps, 103 (91%) of TKA had an ICLD ≤ 15 lb in extension, decreasing to 155 (88%) when the difference between the medial and lateral stressed extension gaps increased to ± 3 mm. In flexion, 47 (77%) had an ICLD ≤ 15 lb with a medial-lateral gap difference of 0 mm, increasing to 147 (84%) at ± 3 mm. Conclusion. This study found a strong relationship between intercompartmental loads and gap symmetry in extension and flexion measured with prostheses in situ. The results suggest that ICLD and medial-lateral gap difference provide similar assessment of soft-tissue balance in robotic arm-assisted TKA. Cite this article: Bone Jt Open 2021;2(11):974–980

INTRODUCTION. During TKA surgery, the usual goal is to achieve equal balancing between the lateral and medial side, which can be achieved by ligament releases or “pie crusting”. However little is known regarding a relationship between the balancing forces on the medial and lateral plateaus during TKA surgery, and the varus and valgus and rotational laxities when the TKA components are inserted. It seems preferable that the laxity after TKA is the same as for the normal intact knee. Hence the first aim of this study was to compare the laxity envelope of a native knee, with the same knee after TKA surgery. The second aim was to examine the relationship between the Varus-Valgus (VV) laxity and the contact forces on the tibial plateau. METHODS. A special rig that reproduced surgical conditions and fit onto an operating table was designed (Figure 1) (Verstraete et al. 2015). The rig allows application of a constant varus/valgus moment, and an internal-external (IE) torque. A series of heel push tests under these loading conditions were performed on 12 non-arthritic half semibodies hip-to-toe cadaveric specimens. Five were used for method development. To measure laxities, the flexion angle, the VV and the IE angle were measured using a navigation system. After testing the native knee, a TKA was performed using the Journey II BCS implant, the navigation assuring correct alignments. Soft tissue balancing was achieved by measuring compressive forces on the lateral and medial condyles with an instrumented tibial trial (Orthosensor, Dania Beach, Florida). At completion of the procedure, the laxity tests were repeated for VV and IE rotation and the contact forces on the tibial plateau were recorded, for the full range of flexion. RESULTS. The average of the varus-valgus and the IE laxity envelope is plotted for the native (yellow), the TKA (pink) and the overlap between the two (orange) (Figure 2). The average for six specimens of the contact force ratio (medial/medial+lateral force) during the varus and valgus test is plotted as a function of the laxity for each flexion angle (Figure 3). DISCUSSION. The Journey II implant replicated the VV laxity of the native knee except for up to 3 degrees more valgus in high flexion. For the IE, the TKA was equal in internal rotation, but up to 5 degrees more constrained in varus in mid range. Plotting contact force ratio against VV laxity (figure 3), as expected during the varus test the forces were clustered in a 0.85–0.95 ratio, implying predominant medial force with likely lateral lift-off. For the valgus test, the force ratio is more spread out, with all the values below 0.6. This could be due to the different stiffness of the MCL and LCL ligaments which are stressed during the VV test. During both tests the laxity increases progressively with flexion angle. Evidently the geometry knee reproduces more lateral laxity at higher flexion as in the anatomic situation. For figures/tables, please contact authors directly.

During TKA surgery, the usual goal is to achieve equal balancing between the lateral and medial side, which can be achieved by ligament releases or “pie crusting”. However little is known regarding a relationship between the balancing forces on the medial and lateral plateaus during TKA surgery, and the varus and valgus and rotational laxities when the TKA components are inserted. It seems preferable that the laxity after TKA is the same as for the normal intact knee. Hence the first aim of this study was to compare the laxity envelope of a native knee, with the same knee after TKA surgery. The second aim was to examine the relationship between the Varus-Valgus (VV) laxity and the contact forces on the tibial plateau. A special rig that reproduced surgical conditions and fit onto an operating table was designed (Verstraete et al. 2015). The rig allows application of a constant varus/valgus moment, and an internal-external (IE) torque. A series of heel push tests under these loading conditions were performed on 12 non-arthritic half semibodies hip-to-toe cadaveric specimens. Five were used for method development. To measure laxities, the flexion angle, the VV and the IE angle were measured using a navigation system. After testing the native knee, a TKA was performed using the Journey II BCS implant, the navigation assuring correct alignments. Soft tissue balancing was achieved by measuring compressive forces on the lateral and medial condyles with an instrumented tibial trial (Orthosensor, Dania Beach, Florida). At completion of the procedure, the laxity tests were repeated for VV and IE rotation and the contact forces on the tibial plateau were recorded, for the full range of flexion. The average of the varus-valgus and the IE laxity envelope is plotted for the native (yellow), the TKA (pink) and the overlap between the two (orange). The average for six specimens of the contact force ratio (medial/medial+lateral force) during the varus and valgus test is plotted as a function of the laxity for each flexion angle. The Journey II implant replicated the VV laxity of the native knee except for up to 3 degrees more valgus in high flexion. For the IE, the TKA was equal in internal rotation, but up to 5 degrees more constrained in varus in mid range. Plotting contact force ratio against VV laxity, as expected during the varus test the forces were clustered in a 0.85–0.95 ratio, implying predominant medial force with likely lateral lift-off. For the valgus test, the force ratio is more spread out, with all the values below 0.6. This could be due to the different stiffness of the MCL and LCL ligaments which are stressed during the VV test. During both tests the laxity increases progressively with flexion angle. Evidently the geometry knee reproduces more lateral laxity at higher flexion as in the anatomic situation

Aims. Surgeons commonly resect additional distal femur during primary total knee arthroplasty (TKA) to correct a flexion contracture, which leads to femoral joint line elevation. There is a paucity of data describing the effect of joint line elevation on mid-flexion stability and knee kinematics. Thus, the goal of this study was to quantify the effect of joint line elevation on mid-flexion laxity. Methods. Six computational knee models with cadaver-specific capsular and collateral ligament properties were implanted with a posterior-stabilized (PS) TKA. A 10° flexion contracture was created in each model to simulate a capsular contracture. Distal femoral resections of + 2 mm and + 4 mm were then simulated for each knee. The knee models were then extended under a standard moment. Subsequently, varus and valgus moments of 10 Nm were applied as the knee was flexed from 0° to 90° at baseline and repeated after each of the two distal resections. Coronal laxity (the sum of varus and valgus angulation with respective maximum moments) was measured throughout flexion. Results. With + 2 mm resection at 30° and 45° of flexion, mean coronal laxity increased by a mean of 3.1° (SD 0.18°) (p < 0.001) and 2.7° (SD 0.30°) (p < 0.001), respectively. With + 4 mm resection at 30° and 45° of flexion, mean coronal laxity increased by 6.5° (SD 0.56°) (p < 0.001) and 5.5° (SD 0.72°) (p < 0.001), respectively. Maximum increased coronal laxity for a + 4 mm resection occurred at a mean 15.7° (11° to 33°) of flexion with a mean increase of 7.8° (SD 0.2°) from baseline. Conclusion. With joint line elevation in primary PS TKA, coronal laxity peaks early (about 16°) with a maximum laxity of 8°. Surgeons should restore the joint line if possible; however, if joint line elevation is necessary, we recommend assessment of coronal laxity at 15° to 30° of knee flexion to assess for mid-flexion instability. Further in vivo studies are warranted to understand if this mid-flexion coronal laxity has negative clinical implications. Cite this article: Bone Joint J 2021;103-B(6 Supple A):87–93

Preoperative ligament laxity can be characterized intraoperatively using digital robotic tensioners. Understanding how preoperative knee joint laxity affects preoperative and early post-operative patient reported outcomes (PROMs) may aid surgeons in tailoring intra-operative balance and laxity to optimize outcomes for specific patients. This study aims to determine if preoperative ligament laxity is associated with PROMs, and if laxity thresholds impact PROMs during early post-operative recovery. 106 patients were retrospectively reviewed. BMI was 31±7kg/m. 2. Mean age was 67±8 years. 69% were female. Medial and lateral knee joint laxity was measured intraoperatively using a digital robotic ligament tensioning device after a preliminary tibial resection. Linear regressions between laxity and KOOS12-function were performed in extension (10°), midflexion (45°), and flexion (90°) at preoperative, 6-week, and 3-month time points. Patients were separated into two laxity groups: ≥7 mm laxity and <7 mm laxity. Student's t-tests determined significant differences between laxity groups for KOOS12-function scores at all time points. Correlations were found between preoperative KOOS12-function and medial laxity in midflexion (p<0.001) and flexion (p<0.01). Patients with <7 mm of medial laxity had greater preoperative KOOS12-function scores compared to patients with ≥7 mm of medial laxity in extension (46.8±18.2 vs. 29.5±15.6, p<0.05), midflexion (48.4±17.8 vs. 32±16.1, p<0.001), and flexion (47.7±18.3 vs. 32.6±14.7, p<0.01). No differences in KOOS12-function scores were observed between medial laxity groups at 6-weeks or 3-months. All knees had <5 mm of medial laxity postoperatively. No correlations were found between lateral laxity and KOOS12-function. Patients with preoperative medial laxity ≥7 mm had lower preoperative PROMs scores compared to patients with <7 mm of medial laxity. No differences in PROMs were observed between laxity groups at 6 weeks or 3 months. Patients with excessive preoperative joint laxity achieve similar PROMs scores to those without excessive laxity after undergoing gap balancing TKA

Aims. The results of kinematic total knee arthroplasty (KTKA) have been reported in terms of limb and component alignment parameters but not in terms of gap laxities and differentials. In kinematic alignment (KA), balance should reflect the asymmetrical balance of the normal knee, not the classic rectangular flexion and extension gaps sought with gap-balanced mechanical axis total knee arthroplasty (MATKA). This paper aims to address the following questions: 1) what factors determine coronal joint congruence as measured on standing radiographs?; 2) is flexion gap asymmetry produced with KA?; 3) does lateral flexion gap laxity affect outcomes?; 4) is lateral flexion gap laxity associated with lateral extension gap laxity?; and 5) can consistent ligament balance be produced without releases?. Patients and Methods. A total of 192 KTKAs completed by a single surgeon using a computer-assisted technique were followed for a mean of 3.5 years (2 to 5). There were 116 male patients (60%) and 76 female patients (40%) with a mean age of 65 years (48 to 88). Outcome measures included intraoperative gap laxity measurements and component positions, as well as joint angles from postoperative three-foot standing radiographs. Patient-reported outcome measures (PROMs) were analyzed in terms of alignment and balance: EuroQol (EQ)-5D visual analogue scale (VAS), Knee Injury and Osteoarthritis Outcome Score (KOOS), KOOS Joint Replacement (JR), and Oxford Knee Score (OKS). Results. Postoperative limb alignment did not affect outcomes. The standing hip-knee-ankle (HKA) angle was the sole positive predictor of the joint line convergence angle (JLCA) (p < 0.001). Increasing lateral flexion gap laxity was consistently associated with better outcomes. Lateral flexion gap laxity did not correlate with HKA angle, the JLCA, or lateral extension gap laxity. Minor releases were required in one third of cases. Conclusion. The standing HKA angle is the primary determinant of the JLCA in KTKA. A rectangular flexion gap is produced in only 11% of cases. Lateral flexion gap laxity is consistently associated with better outcomes and does not affect balance in extension. Minor releases are sometimes required as well, particularly in limbs with larger preoperative deformities. Cite this article: Bone Joint J 2019;101-B:331–339

Mechanical alignment (MA) in total knee arthroplasty (TKA), although considered the gold standard, reportedly has up to 25% of patients expressing post-operative dissatisfaction. Biomechanical outcomes following kinematic alignment (KA) in TKA, developed to restore native joint alignment, remain unclear. Without a clear consensus for the optimal alignment strategy during TKA, the purpose of this study was to conduct a paired biomechanical comparison of MA and KA in TKA by experimentally quantifying joint laxity and medial collateral ligament (MCL) strain. 14 bilateral native fresh-frozen cadaveric lower limbs underwent medially-stabilised TKA (GMK Sphere, Medacta, Switzerland) using computed CT-based subject-specific guides, with KA and MA performed on left and right legs, respectively. Each specimen was subjected to sensor-controlled mediolateral laxity tests. A handheld force sensor (Mark-10, USA) was used to generate an abduction-adduction moment of 10Nm at the knee at fixed flexion angles (0°, 30°, 60°, 90°). A digital image correlation system was used to compute the strain on the superficial medial collateral ligament. A six-camera optical motion capture system (Vicon MX+, UK) was used to acquire kinematics using a pre-defined CT-based anatomical coordinate system. A linear mixed model and Tukey's posthoc test were performed to compare native, KA and MA conditions (p<0.05). Unlike MA, medial joint laxity in KA was similar to the native condition; however, no significant difference was found at any flexion angle (p>0.08). Likewise, KA was comparable with the native condition for lateral joint laxity, except at 30°, and no statistical difference was observed. Although joint laxity in MA seemed lower than the native condition, this difference was significant only for 30° flexion (p=0.01). Both KA and MA exhibited smaller MCL strain at 0° and 30°; however, all conditions were similar at 60° and 90°. Medial and lateral joint laxity seemed to have been restored better following KA than MA; however, KA did not outperform MA in MCL strain, especially after mid-flexion. Although this study provides only preliminary indications regarding the optimal alignment strategy to restore native kinematics following TKA, further research in postoperative joint biomechanics for load bearing conditions is warranted

Aims. Mid-level constraint designs for total knee arthroplasty (TKA) are intended to reduce coronal plane laxity. Our aims were to compare kinematics and ligament forces of the Zimmer Biomet Persona posterior-stabilized (PS) and mid-level designs in the coronal, sagittal, and axial planes under loads simulating clinical exams of the knee in a cadaver model. Methods. We performed TKA on eight cadaveric knees and loaded them using a robotic manipulator. We tested both PS and mid-level designs under loads simulating clinical exams via applied varus and valgus moments, internal-external (IE) rotation moments, and anteroposterior forces at 0°, 30°, and 90° of flexion. We measured the resulting tibiofemoral angulations and translations. We also quantified the forces carried by the medial and lateral collateral ligaments (MCL/LCL) via serial sectioning of these structures and use of the principle of superposition. Results. Mid-level inserts reduced varus angulations compared to PS inserts by a median of 0.4°, 0.9°, and 1.5° at 0°, 30°, and 90° of flexion, respectively, and reduced valgus angulations by a median of 0.3°, 1.0°, and 1.2° (p ≤ 0.027 for all comparisons). Mid-level inserts reduced net IE rotations by a median of 5.6°, 14.7°, and 17.5° at 0°, 30°, and 90°, respectively (p = 0.012). Mid-level inserts reduced anterior tibial translation only at 90° of flexion by a median of 3.0 millimetres (p = 0.036). With an applied varus moment, the mid-level insert decreased LCL force compared to the PS insert at all three flexion angles that were tested (p ≤ 0.036). In contrast, with a valgus moment the mid-level insert did not reduce MCL force. With an applied internal rotation moment, the mid-level insert decreased LCL force at 30° and 90° by a median of 25.7 N and 31.7 N, respectively (p = 0.017 and p = 0.012). With an external rotation moment, the mid-level insert decreased MCL force at 30° and 90° by a median of 45.7 N and 20.0 N, respectively (p ≤ 0.017 for all comparisons). With an applied anterior load, MCL and LCL forces showed no differences between the two inserts at 30° and 90° of flexion. Conclusion. The mid-level insert used in this study decreased coronal and axial plane laxities compared to the PS insert, but its stabilizing benefit in the sagittal plane was limited. Both mid-level and PS inserts depended on the MCL to resist anterior loads during a simulated clinical exam of anterior laxity. Cite this article: Bone Jt Open 2023;4(6):432–441

Inverse Kinematic Alignment (iKA) and Gap Balancing (GB) aim to achieve a balanced TKA via component alignment. However, iKA aims to recreate the native joint line versus resecting the tibia perpendicular to the mechanical axis. This study aims to compare how two alignment methods impact 1) gap balance and laxity throughout flexion and 2) the coronal plane alignment of the knee (CPAK). Two surgeons performed 75 robotic assisted iKA TKA's using a cruciate retaining implant. An anatomic tibial resection restored the native joint line. A digital joint tensioner measured laxity throughout flexion prior to femoral resection. Femoral component position was adjusted using predictive planning to optimize balance. After femoral resection, final joint laxity was collected. Planned GB (pGB) was simulated for all cases posthoc using a neutral tibial resection and adjusting femoral position to optimize balance. Differences in ML balance, laxity, and CPAK were compared between planned iKA (piKA) and pGB. ML balance and laxity were also compared between piKA and final (fiKA). piKA and pGB had similar ML balance and laxity, with mean differences <0.4mm. piKA more closely replicated native MPTA (Native=86.9±2.8°, piKA=87.8±1.8°, pGB=90±0°) and native LDFA (Native=87.5±2.7°, piKA=88.9±3°, pGB=90.8±3.5°). piKA planned for a more native CPAK distribution, with the most common types being II (22.7%), I (20%), III (18.7%), IV (18.7%) and V (18.7%). Most pGB knees were type V (28.4%), VII (37.8%), and III (16.2). fiKA and piKA had similar ML balance and laxity, however fiKA was more variable in midflexion and flexion (p<0.01). Although ML balance and laxity were similar between piKA and pGB, piKA better restored native joint line and CPAK type. The bulk of pGB knees were moved into types V, VII, and III due to the neutral tibial cut. Surgeons should be cognizant of how these differing alignment strategies affect knee phenotype

Aims. Total knee arthroplasty (TKA) may provoke ankle symptoms. The aim of this study was to validate the impact of the preoperative mechanical tibiofemoral angle (mTFA), the talar tilt (TT) on ankle symptoms after TKA, and assess changes in the range of motion (ROM) of the subtalar joint, foot posture, and ankle laxity. Methods. Patients who underwent TKA from September 2020 to September 2021 were prospectively included. Inclusion criteria were primary end-stage osteoarthritis (Kellgren-Lawrence stage IV) of the knee. Exclusion criteria were missed follow-up visit, post-traumatic pathologies of the foot, and neurological disorders. Radiological angles measured included the mTFA, hindfoot alignment view angle, and TT. The Foot Function Index (FFI) score was assessed. Gait analyses were conducted to measure mediolateral changes of the gait line and ankle laxity was tested using an ankle arthrometer. All parameters were acquired one week pre- and three months postoperatively. Results. A total of 69 patients (varus n = 45; valgus n = 24) underwent TKA and completed the postoperative follow-up visit. Of these, 16 patients (23.2%) reported the onset or progression of ankle symptoms. Varus patients with increased ankle symptoms after TKA had a significantly higher pre- and postoperative TT. Valgus patients with ankle symptoms after TKA showed a pathologically lateralized gait line which could not be corrected through TKA. Patients who reported increased ankle pain neither had a decreased ROM of the subtalar joint nor increased ankle laxity following TKA. The preoperative mTFA did not correlate with the postoperative FFI (r = 0.037; p = 0.759). Conclusion. Approximately one-quarter of the patients developed ankle pain after TKA. If patients complain about ankle symptoms after TKA, standing radiographs of the ankle and a gait analysis could help in detecting a malaligned TT or a pathological gait. Cite this article: Bone Joint J 2023;105-B(11):1159–1167

Introduction. Surgeons commonly resect additional distal femur during primary total knee arthroplasty (TKA) to correct a flexion contracture to restore range of motion and knee function. However, the effect of joint line elevation on the resulting TKA kinematics including frontal plane laxity is unclear. Thus, our goal was to quantify the effect of additional distal femoral resection on passive extension and mid-flexion laxity. Methods. Six computational knee models with capsular and collateral ligament properties specific to TKA were developed and implanted with a contemporary posterior-stabilized TKA. A 10° flexion contracture was modeled by imposing capsular contracture as determined by simulating a common clinical exam of knee extension and accounting for the length and weight of each limb segment from which the models were derived (Figure 1). Distal femoral resections of 2 mm and 4 mm were simulated for each model. The knees were then extended by applying the measured knee moments to quantify the amount of knee extension. The output data were compared with a previous cadaveric study using a two-sample two-tailed t-test (p<0.05) [1]. Subsequently, varus and valgus torques of ±10 Nm were applied as the knee was flexed from 0° to 90° at the baseline, and after distal resections of 2 mm, and 4 mm. Coronal laxity, defined as the sum of varus and valgus angulation in response to the applied varus and valgus torques, was measured at 30° and 45°of flexion, and the flexion angle was identified where the increase in laxity was the greatest with respect to baseline. Results. With 2 mm and 4 mm of distal femoral resection, the knee extended an additional 4°±0.5° and 8°±0.75°, respectively (Figure 2). No significant difference was found between the extension angle predicted by the six models and the results of the cadaveric study after 2 mm (p= 0.71) and 4 mm (p= 0.47). At 2 mm resection, mean coronal laxity increased by 3.1° and 2.7° at 30° and 45°of flexion, respectively. At 4 mm resection, mean coronal laxity increased by 6.5° and 5.5° at 30° and 45° of flexion, respectively (Figures 3a and 3b). The flexion angle corresponding to the greatest increase in coronal laxity for 2 mm of distal resection occurred at 22±7° of flexion with a mean increase in laxity of 4.0° from baseline. For 4 mm distal resection, the greatest increase in coronal laxity occurred at 16±6° of flexion with a mean increase in laxity of 7.8° from baseline. Conclusion. A TKA computational model representing a knee with preoperative flexion contracture was developed and corroborated measures from a previous cadaveric study [1]. While additional distal femoral resection in primary TKA increases passive knee extension, the consequent joint line elevation induced up to 8° of additional coronal laxity in mid-flexion. This additional midflexion laxity could contribute to midflexion instability; a condition that may require TKA revision surgery. Further studies are warranted to understand the relationship between joint line elevation, midflexion laxity, and instability. For any figures or tables, please contact the authors directly

The aim of an anterior cruciate ligament (ACL) reconstruction is to regain functional stability of the knee following ACL injury, ideally allowing patients to return to their pre-injury level of activity. The purpose of this study was to assess clinical, functional and patient-reported outcomes following primary ACL reconstruction with hamstring autograft. A prospective case-series design (n=1610) was used to gather data on post-operative ACL graft laxity, functional testing performance and scores on the ACL quality of life (ACL-QOL) questionnaire. Demographic data were collected for all patients. Post-operative ACL laxity assessment using the Lachman and Pivot-shift tests was completed independently on each patient by a physiotherapist and an orthopaedic surgeon at the 6-, 12- and 24-months post-operative appointments. A battery of functional tests was also assessed including single leg Bosu balance, and 4 single-leg hop tests. The hop tests provided a comparative assessment of limb-to-limb function. Patients completed the ACL-QOL at all time points. The degree and frequency of post-operative laxity was calculated. A Spearman's rank correlation matrix was undertaken to assess for relationships between post-operative laxity, functional test performance, and the ACL-QOL scores. A linear regression model was used to assess for relationships between the ACL-QOL scores, as well as the functional testing results, and patient demographic factors. ACLR patients were 55% male, with a mean age of 29.7 years (SD=10.4), mean BMI of 25 (SD=3.9), and mean Beighton score of 3.3 (SD=2.5). At clinical assessment 2-years post-operatively, 20.6% of patients demonstrated a positive Lachman test and 7.7% of patients demonstrated a positive Pivot-shift test. The mean ACL-QOL score was 28.6/100 (SD=13.4) pre-operatively, 58.2/100 (SD=17.6) at 6-months, 71.8/100 (SD=18.1) at 12-months, and 77.4/100 (SD=19.2) at 24-months post-operative. Functional tests assessing operative to non-operative limb performance demonstrated that patients were continuing to improve up to the 24-month mark, with limb symmetry indices ranging from 96.6–103.1 for the single-leg hop tests. Spearman's correlation coefficient demonstrated a significant relationship between the presence of ACL graft laxity and ACL-QOL score at 12- and 24-months post-operative (p < 0 .05). Functional performance on the single leg balance and single-leg hop tests demonstrated significant correlations to the 6-, 12- and 24-month ACL-QOL scores (p < 0 .05). There was no statistically significant correlation between the functional testing results and the presence of ACL graft laxity. This study demonstrated that up to 20.6% of patients had clinically measurable graft laxity 2-years after ACLR. In this cohort, patients with graft laxity demonstrated lower ACL-QOL scores, but did not demonstrate lower functional testing performance. Patient-reported ACL-QOL scores improved significantly at each time point following ACLR, and functional performance continued to improve up to 2-years after surgery. The ACL-QOL score was strongly correlated to the patient's ability to perform single-limb functional tests, indicating that the ACL-QOL score accurately predicted level of function

Background. Lateral ankle instability is a common problem, but the precise role of the lateral ankle structures has not been accurately investigated. This study aimed to accurately investigate lateral ankle complex stability for the first time using a novel robotic testing platform. Method. A six degrees of freedom robot manipulator and a universal force/torque sensor were used to test 10 foot and ankle specimens. The system automatically defined the path of unloaded plantar/dorsi flexion. At four flexion angles: 20° dorsiflexion, neutral flexion, 20° and 40° of plantarflexion; anterior-posterior (90N), internal-external (5Nm) and inversion-eversion (8Nm) laxity were tested. The motion of the intact ankle was recorded first and then replayed following transection of the lateral retinaculum, Anterior Talofibular Ligament (ATFL) and Calcaneofibular Ligament (CFL). The decrease in force/torque reflected the contribution of the structure to restraining laxity. Data were analysed using repeated measures of variance and paired t-tests. Results. The ATFL was the primary restraint to anterior drawer (P< 0.01) and the CFL the primary restraint to inversion throughout range (P< 0.04), but with increased plantarflexion the ATFL's contribution increased. The ATFL had a significant role in resisting tibial external rotation, particularly at higher levels of plantarflexion, contributing 63% at 40° (P< 0.01). The CFL provided the greatest resistance to external tibial rotation, 22% at 40° plantarflexion (P< 0.01). The extensor retinaculum and skin did not offer significant restraint in any direction tested. Conclusion. This study shows accurately for the first time the significant role the ATFL and CFL have in rotational ankle stability. This significant loss in rotational stability may have implications in the aetiology of osteophyte formation and early degenerative changes in patients with chronic ankle instability. This is the first time the role of the lateral ankle complex has been quantified using a robotic testing platform

The primary purpose of this study was to assess whether patients presenting with clinical graft laxity following primary anatomic anterior cruciate ligament (ACL) reconstruction using hamstring autograft reported a significant difference in disease-specific quality-of-life (QOL) as measured by the ACL-QOL questionnaire. Clinical ACL graft laxity was assessed in a cohort of 1134/1436 (79%) of eligible patients using the Lachman and Pivot-shift tests pre-operatively and at 12- and 24-months following ACL reconstruction. Post-operative ACL laxity was assessed by an orthopaedic surgeon and a physical therapist who were blinded to each other's examination. If there was a discrepancy between the clinical examination findings from these two assessors, then a third impartial examiner assessed the patient to ensure a grading consensus was reached. Patients completed the ACL-QOL questionnaire pre-operatively, and 12- and 24-months post-operatively. Descriptive statistics were used to assess patient demographics, rate of post-operative ACL graft laxity, surgical failures, and ACL-QOL scores. A Spearman rho correlation coefficient was utilised to assess the relationships between ACL-QOL scores and the Lachman and Pivot-shift tests at 24-months post-operative. An independent t-test was used to determine if there were differences in the ACL-QOL scores of subjects who sustained a graft failure compared to the intact graft group. ACL-QOL scores and post-operative laxity were assessed using a one-way analysis of variance (ANOVA). There were 70 graft failures (6.17%) in the 1134 patients assessed at 24-months. A total of 226 patients (19.9%) demonstrated 24-months post-operative ACL graft laxity. An isolated positive Lachman test was assessed in 146 patients (12.9%), an isolated positive Pivot-shift test was apparent in 14 patients (1.2%), and combined positive Lachman and Pivot-shift tests were assessed in 66 patients (5.8%) at 24-months post-operative. There was a statistically significant relationship between 24-month post-operative graft laxity and ACL-QOL scores (p < 0.001). Specifically, there was a significant correlation between the ACL-QOL and the Lachman test (rho = −0.20, p < 0.001) as well as the Pivot-shift test (rho = −0.22, p < 0.001). There was no significant difference between the scores collected from the graft failure group prior to failure occurring (mean = 74.38, SD = 18.61), and the intact graft group (mean = 73.97, SD = 21.51). At 24-months post-operative, the one-way ANOVA demonstrated a statistically significant difference between the ACL-QOL scores of the no laxity group (mean = 79.1, SD = 16.9) and the combined positive Lachman and Pivot-shift group (mean = 68.5, SD = 22.9), (p = 0, mean difference = 10.6). Two-years post ACL reconstruction, 19.9% of patients presented with clinical graft laxity. Post-operative graft laxity was significantly correlated with lower ACL-QOL scores. The difference in ACL-QOL scores for patients with an isolated positive Lachman or Pivot-shift test did not meet the threshold of a clinically meaningful difference. Patients with clinical laxity on both the Lachman and Pivot-shift tests demonstrated the lowest patient-reported ACL-QOL scores, and these results exceeded the minimal clinically important difference

We assessed hyperextension of the knee and joint laxity in 169 consecutive patients who underwent an anterior cruciate ligament reconstruction between 2000 and 2002 and correlated this with a selected number of age- and gender-matched controls. In addition, the mechanism of injury in the majority of patients was documented. Joint laxity was present in 42.6% (72 of 169) of the patients and hyperextension of the knee in 78.7% (133 of 169). All patients with joint laxity had hyperextension of their knee. In the control group only 21.5% (14 of 65) had joint laxity and 37% (24 of 65) had hyperextension of the knee. Statistical analysis showed a significant correlation for these associations. We conclude that anterior cruciate ligament injury is more common in those with joint laxity and particularly so for those with hyperextension of the knee

Aims. Sagittal plane imbalance (SPI), or asymmetry between extension and flexion gaps, is an important issue in total knee arthroplasty (TKA). The purpose of this study was to compare SPI between kinematic alignment (KA), mechanical alignment (MA), and functional alignment (FA) strategies. Methods. In 137 robotic-assisted TKAs, extension and flexion stressed gap laxities and bone resections were measured. The primary outcome was the proportion and magnitude of medial and lateral SPI (gap differential > 2.0 mm) for KA, MA, and FA. Secondary outcomes were the proportion of knees with severe (> 4.0 mm) SPI, and resection thicknesses for each technique, with KA as reference. Results. FA showed significantly lower rates of medial and lateral SPI (2.9% and 2.2%) compared to KA (45.3%; p < 0.001, and 25.5%; p < 0.001) and compared to MA (52.6%; p < 0.001 and 29.9%; p < 0.001). There was no difference in medial and lateral SPI between KA and MA (p = 0.228 and p = 0.417, respectively). FA showed significantly lower rates of severe medial and lateral SPI (0 and 0%) compared to KA (8.0%; p < 0.001 and 7.3%; p = 0.001) and compared to MA (10.2%; p < 0.001 and 4.4%; p = 0.013). There was no difference in severe medial and lateral SPI between KA and MA (p = 0.527 and p = 0.307, respectively). MA resulted in thinner resections than KA in medial extension (mean difference (MD) 1.4 mm, SD 1.9; p < 0.001), medial flexion (MD 1.5 mm, SD 1.8; p < 0.001), and lateral extension (MD 1.1 mm, SD 1.9; p < 0.001). FA resulted in thinner resections than KA in medial extension (MD 1.6 mm, SD 1.4; p < 0.001) and lateral extension (MD 2.0 mm, SD 1.6; p < 0.001), but in thicker medial flexion resections (MD 0.8 mm, SD 1.4; p < 0.001). Conclusion. Mechanical and kinematic alignment (measured resection techniques) result in high rates of SPI. Pre-resection angular and translational adjustments with functional alignment, with typically smaller distal than posterior femoral resection, address this issue. Cite this article: Bone Jt Open 2024;5(8):681–687

Introduction. Surgeons commonly resect additional distal femur during primary total knee arthroplasty (TKA) to correct a flexion contracture. However, the effect of joint line proximalization on TKA kinematics is unclear. Thus, our goal was to quantify the effect of additional distal femoral resection on knee extension and mid-flexion laxity. Methods. Six computational knee models with TKA-specific capsular and collateral ligament properties were implanted with a contemporary posterior-stabilized TKA. A 10° flexion contracture was modeled to simulate a capsular contracture. Distal femoral resections of +2 mm and +4 mm were simulated for each model. The knees were then extended under standardized torque to quantify additional knee extension achieved. Subsequently, varus and valgus torques of ±10 Nm were applied as the knee was flexed from 0° to 90° at the baseline, +2 mm, and +4 mm distal resections. Coronal laxity, defined as the sum of varus and valgus angulation with respective torques, was measured at mid-flexion. Results. With +2 mm and +4 mm of distal femoral resection, the knee extended an additional 4°±0.5° and 8°±0.75°, respectively. At 30° and 45°of flexion, baseline laxity averaged 4.8° and 5.0°, respectively. At +2 mm resection, mean coronal laxity increased by 3.1° and 2.7° at 30° and 45°of flexion, respectively. At +4 mm resection, mean coronal laxity increased by 6.5° and 5.5° at 30° and 45° of flexion, respectively. Maximal increased coronal laxity for a +4 mm resection occurred at a mean 16° (range, 11–27°) of flexion with a mean increased laxity of 7.8° from baseline. Conclusion. While additional distal femoral resection in primary TKA increases knee extension, the consequent joint line elevation induces up to 8° of coronal laxity in mid-flexion in this computational model. As such, posterior capsular release prior to resecting additional distal femur to correct a flexion contracture should be considered

Introduction. When performing total knee arthroplasty (TKA), surgeons often utilize a posterior-stabilized (PS) design which compensates for the loss of the posterior cruciate ligament (PCL). These designs attempt to replicate normal knee kinematics and loading using a cam and post to provide posterior restraint of the tibia during flexion. However, these designs may not be able to compensate for the increase in flexion space or the inherent loss of coronal stability after PCL release compared to a cruciate retaining (CR) design. This study aimed to compare stability of PS and CR TKA designs by assessing laxity in three planes. Methods. The specimens utilized in this study were lower extremities from fresh cadavers of donors who had previously undergone a total knee replacement (Medical Education and Research Institute (Memphis, TN) and Restore Life USA (Johnson City, TN)). IRB approval was obtained prior to performing the study. Twenty-three knee specimens (8 left, 15 right) were retrieved and all skin, subcutaneous tissue and muscle was removed. The femur and tibia were cut transversely 180 mm superior and inferior to the knee joint line, respectively, and specimens were mounted in a custom knee testing machine. Specimens were tested with the knee joint at full extension and at 30, 60, and 90 degrees of flexion. Laxity was assessed at 1.5 Nm of internal and external torque and 10 Nm varus and valgus torque, as well as a 35 N anterior and posterior force. Laxity was expressed as degrees of tibial displacement in the coronal plane under a varus/valgus torque and degrees of displacement in the transverse plane under an internal/external torque, as well as mm of anterior or posterior displacement. TKA components were retrieved to determine PS or CR design and grouped accordingly. Results. Of the 23 implants, 10 were PS designs and 13 were CR. PS posterior laxity was 1 mm greater in full extension (p = 0.02, Figure 1), and PS varus laxity increased by 6 degrees at 90 degrees of flexion over CR laxity (p = 0.04, Figure 3). Varus to valgus laxity range of PS knees was greater than CR knees for all flexion angles. PS external rotational laxity at 90 degrees of flexion was greater than that of CR laxity by 7 degrees (p = 0.02, Figure 2). Discussion. Results indicate significant laxity differences between PS and CR designs in both full extension and 90 degrees of flexion. PS designs have decreased coronal stability compared to CR, but appear to mimic AP constraint in midflexion and flexion. Mihalko et al. (2000) showed that loss of the PCL during TKA leads to a decrease in coronal stability, which is confirmed here. The post and cam mechanism of the PS designs restores AP stability during flexion but does not restore this coronal stability. These results may be limited by variations in implant design

Navigation systems are able to measure very accurately the movement of bones, and consequently the knee laxity, which is a movement of the tibia under the femur. These systems might help measuring the knee laxity during the implantation of a total (TKR) or a unicompartmental (UKR) knee replacement. 20 patients operated on for TKR (13 cases) or UKR (7 cases) because of primary varus osteoarthritis have been analyzed. Pre-operative examination involved varus and valgus stress X-rays at 0 and 90° of knee flexion. The intra-operative medial and lateral laxity was measured with the navigation system at the beginning of the procedure and after prosthetic implantation. Varus and valgus stress X-rays were repeated after 6 weeks. X-ray and navigated measurements before and after knee replacement were compared with a paired Wilcoxon test at a 0.05 level of significance. The mean pre-operative medial laxity in extension was 2.3° (SD 2.3°). The mean pre-operative lateral laxity in extension was 5.6° (SD 5.1°). The mean pre-operative medial laxity in flexion was 2.2° (SD 1.9°). The mean pre-operative lateral laxity in flexion was 6.7° (SD 6.0°). The mean intra-operative medial laxity in extension at the beginning of the procedure was 3.6° (SD 1.7°). The mean intra-operative lateral laxity in extension at the beginning of the procedure was 3.0° (SD 1.3°). The mean intra-operative medial laxity in flexion at the beginning of the procedure was 1.9° (SD 2.6°). The mean intra-operative lateral laxity in flexion at the beginning of the procedure was 3.5° (SD 2.7°). The mean intra-operative medial laxity in extension after implantation was 2.1° (SD 0.9°). The mean intra-operative lateral laxity in extension after implantation was 1.9° (SD 1.1°). The mean intra-operative medial laxity in flexion after implantation was 1.9° (SD 2.5°). The mean intra-operative lateral laxity in flexion after implantation was 3.0° (SD 2.8°). The mean post-operative medial laxity in extension was 2.4° (SD 1.1°). The mean post-operative lateral laxity in extension was 2.0° (SD 1.7°). The mean post-operative medial laxity in flexion was 4.4° (SD 3.3°). The mean post-operative lateral laxity in flexion was 4.7° (SD 3.2°). There was a significant difference between navigated and radiographic measurements for the pre-operative medial laxity in extension (mean = 1.4° – p = 0.005), the pre-operative lateral laxity in extension (mean = 2.6° – p = 0.01), the pre-operative lateral laxity in flexion (mean = 3.3° – p = 0.005). There was no significant difference between navigated and radiographic measurements for the pre-operative medial laxity in flexion (mean = 0.3° – p = 0.63). There was a significant difference between navigated and radiographic measurements for the postoperative medial laxity in flexion (mean = 2.5° – p = 0.004). There was no significant difference between navigated and radiographic measurements for the postoperative medial laxity in extension (mean = 0.3° – p = 0.30), the post-operative lateral laxity in extension (mean = 0.2° – p = 0.76), the post-operative lateral laxity in flexion (mean = 1.7° – p = 0.06). These differences were less than 2 degrees in most of the cases, and then considered as clinically irrelevant. The navigation system used allowed measuring the medial and lateral laxity before and after TKR. This measurement was significantly different from the radiographic measurement by stress X-rays for pre-operative laxity, but not statistically different from the radiographic measurement by stress X-rays for post-operative laxity. The differences were mostly considered as clinically irrelevant. The navigated measurement of the knee laxity can be considered as accurate. The navigated measurement is valuable information for balancing the knee during TKR. The reproducibility of this balancing might be improved due to a more objective assessment

Introduction: Computer navigation in total knee arthroplasty (TKA) may assist the surgeon with precise information about ligament tension and varus/valgus alignment throughout the complete range of motion, but there is only little information about how much ligament laxity is needed and how much laxity is too much. In the current study we measured the mechanical axis and opening of the joint at different time points, in different degrees of knee flexion and with varus and valgus stress during the procedure of computer navigated TKA. Methods: Forty-nine consecutive patients underwent a MIS computer navigated TKA. With the Stryker Knee Navigation System varus/valgus alignment and distraction/compression was measured in 0°, 45° and 90° of knee flexion immediate after digitalization of the knee and after fascial closure. Values were noted in a neutral position and with maximal varus and maximal valgus stress applied. Patients with posterior stabilized implants were compared to those with cruciate retaining implants. Patients with preoperative varus malalignment or valgus malalignment were compared to patients with straight preoperative mechanical axes. Results: At the beginning of the operative procedure the mean mechanical alignment was 1.9° varus at 0° knee flexion, 1.5° varus at 45° knee flexion and 1.5° varus at 90° knee flexion. Patients showed a mean mediolateral joint opening of 6.1° at 0° knee flexion, 5.9° at 45° knee flexion and 4.5° at 90° knee flexion. After implantation of the knee prosthesis and fascial closure mechanical alignment was 0.3° varus at 0° knee flexion, 0° varus at 45° knee flexion and 0.2° varus at 90° knee flexion. Mean joint laxity was 3.4° at 0° knee flexion, 3.1° at 45° knee flexion and 2.3° at 90° knee flexion. There was more lateral than medial joint opening postoperatively in 45° and 90° knee flexion regardless of the prosthesis type implanted. Preoperative varus and valgus malalignment could be reduced to values identical with those patients with straight preoperative mechanical axes. Discussion: Mean varus/valgus laxity after implantation of a MIS computer navigated TKA was lower than prior to prosthesis implantation. Varus/valgus laxity of an approximate total range of 1.5°–2° can be achieved at all measured degrees of knee flexion and seems to be the ideal laxity for TKA. Computer navigation in TKA can consistently reduce preoperative varus/valgus malalignment to a level comparable to patients with preoperatively normal mechanical axes. More lateral joint opening is found before as well as after implantation of the prosthesis in 45° and 90° of knee flexion. The type of prosthesis implanted seems not to effect postoperative joint laxity

Postero-lateral rotator instability (PLRI) is the most common pattern of recurrent elbow instability. Unfortunately, current imaging to aid PLRI diagnosis is limited. We have developed an ultrasound (US) technique to measure ulnohumeral joint gap with and without stress of the lateral ulnocollateral ligament. We sought to define lateral ulnohumeral joint gap measurements in the resting and stressed state to provide insight into how US may aid diagnosis of PLRI. Sixteen elbows were evaluated in eight healthy volunteers. Lateral ulnohumeral gap was measured on US in the resting position and with posterolateral drawer stress test maneuver applied. Joint laxity was calculated as the difference between stress and rest conditions. Measurements were performed by two independent readers with comparison performed between stress and rest positions. A highly significant difference in ulnohumeral gap was seen between stress and rest conditions (Reader 1: p < 0 .0001 and Reader 2: p=0.0002) with median values of 2.93 mm and 2.50 mm at rest and 3.92 mm and 3.40 mm at stress for Reader 1 and 2 respectively. Median joint laxity was 1.02 mm and 0.74 mm respectively for each reader. Correlation and agreement between readers was good. This study provides key new insight into use of US for diagnosis as PLRI as it defines normal ulnohumeral distances and demonstrates widening when applying the posterolateral drawer stress maneuver. Further evaluation of this technique is required in patients with PLRI

The lateral ligament complex is the primary constraint to posterolateral rotatory laxity of the elbow, and if it is disrupted during surgery, posterolateral instability may ensue. The Wrightington approach to the head of the radius involves osteotomising the ulnar insertion of this ligament, rather than incising through it as in the classic posterolateral (Kocher) approach. In this biomechanical study of 17 human cadaver elbows, we demonstrate that the surgical approach to the head can influence posterolateral laxity, with the Wrightington approach producing less posterolateral rotatory laxity than the posterolateral approach

Introduction. Total knee arthroplasty (TKA) is a successful procedure for end stage arthritis of the knee that is being performed on an exponential basis year after year. Most surgeons agree that soft tissue balancing of the TKA is a paramount to provide a successful TKA. We utilized a set of retrieved lower extremities with an existing TKA to measure the laxity of the knee in all three planes to see if wear scores of the implants correlated to the laxity measured. This data has never been reported in the literature. Methods. IRB approval was obtained for the local retrieval program. Each specimen was retrieved after removing the skin, subcutaneous tissue and muscle from mid thigh to mid tibia. The femur, tibia and fibula were then transversely cut to remove the specimen for testing. Each specimen was then imaged using a flouroscopic imaging unit (OEC, Inc) in the AP, Lateral and sunrise views. These images were used to analyze whether there were any signs of osteolysis. Each specimen was mounted into a custom knee testing machine (Little Rock AR). Each specimen then was tested at full extension, 30, 60, and 90 degrees of flexion. At each flexion angle the specimen was subjected to a 10Nm varus and valgus torque, a 1.5Nm internal and external rotational torque and a 35N anterior and posterior directed force. Each specimen's implants were removed to record manufacturer and lot numbers. Polyethylene damage scores (Hood et al. JBMR 1983) were then calculated in the medial, lateral and backside of the polyethylene insert as well as on the medial and lateral femoral condyle. (Figure 1) Correlation coefficients were then calculated to show any relationship with soft tissue balancing in all three planes and wear scores. Results. No correlation > 0.4 existed for any surface damage on the polyethylene or femoral condyle to laxity in any plane (Figure 2). The highest correlations were found with backside wear (0.5) to internal and external rotational laxity. Two thirds of the specimens had more varus than valgus laxity in the coronal plane (p=0.03). Discussion/Conclusion. This is the first report of necropsy obtained retrievals where the soft tissue laxity of the knee was recorded. Although small numbers with different implant types the data shows that limited correlation exists between implant surface damage and increased laxity. The strongest correlation we found was backside wear to transverse plane laxity in flexion and extension, but this most likely is related to locking mechanism design. It seems in this set of implants that the soft tissue laxity did not affect implant bone interfaces as all were over 10 years from surgery. For figures/tables, please contact authors directly.

The amount of anteroposterior laxity required for a good range of movement and knee function in a cruciate-retaining total knee replacement (TKR) continues to be debated. We undertook a retrospective study to evaluate the effects of anteroposterior laxity on the range of movement and knee function in 55 patients following the e-motion cruciate-retaining TKR with a minimum follow-up of two years. The knees were divided into stable (anteroposterior translation, ≤ 10 mm, 38 patients) and unstable (anteroposterior translation, > 10 mm, 17) groups based on the anteroposterior laxity, measured using stress radiographs. We compared the Hospital for Special Surgery (HSS) scores, the Western Ontario MacMasters University Osteoarthritis (WOMAC) index, weight-bearing flexion, non-weight-bearing flexion and the reduction of flexion under weight-bearing versus non-weight-bearing conditions, which we referred to as delta flexion, between the two groups at the final follow-up. There were no differences between the stable and unstable groups with regard to the mean HHS and WOMAC total scores, as well as weight-bearing and non-weight-bearing flexion (p = 0.277, p = 0.082, p = 0.095 and p = 0.646, respectively). However, the stable group had a better WOMAC function score and less delta flexion than the unstable group (p = 0.011 and p = 0.005, respectively). Our results suggest that stable knees with laxity ≤ 10 mm have a good functional outcome and less reduction of flexion under weight-bearing conditions than unstable knees with laxity > 10 mm following an e-motion cruciate-retaining TKR

The function of the knee joint is to allow for locomotion and is comprised of various bodily structures including the four major ligaments; medial collateral ligament (MCL), lateral collateral ligament (LCL), anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL). The primary function of the ligaments are to provide stability to the joint. The knee is prone to injury as a result of osteoarthritis as well as ligamentous and meniscal lesions. Furthermore, compromised joint integrity due to ligamentous injury may be a result of direct and indirect trauma, illness, occupational hazard as well as lifestyle. A device capable of non-invasively determining the condition of the ligaments in the knee joint would be a useful tool to assist the clinician in making a more informed diagnosis and prognosis of the injury. Furthermore, the device would potentially reduce the probability of a misdiagnosis, timely diagnosis and avoidable surgeries. The existing Laxmeter prototype (UK IPN: GB2520046) is a Stress Radiography Device currently limited to measuring the laxity of the MCL and LCL at multiple fixed degrees of knee flexion. Laxity refers to the measure of a ligament's elasticity and stiffness i.e. the condition of the ligament, by applying a known load (200N) to various aspects of the proximal tibial and thereby inducing tibial translation. The extent of translation would indicate the condition of the ligament. The Laxmeter does not feature a load applying component as of yet, however, it allows for the patient to be in the most comfortable and ideal position during radiographic laxity measurement testing. The entire structure is radiolucent and attempts to address the limitations of existing laxity measurement devices, which includes: excessive radiation exposure to the radiographic assistant, little consideration for patient ergonomics and restrictions to cruciate or collateral ligament laxity measurements. The study focusses on further developing and modifying the Laxmeter to allow for: the laxity measurement of all four major ligaments of the knee joint, foldability for improved storage and increased structural integrity. Additionally, a load applicator has been designed as an add-on to the system thereby making the Laxmeter a complete Stress Radiography Device. Various materials including Nylon, Polycarbonate, Ultra High Molecular Weight Polyethylene (UHMWPE) – PE 1000, and Acetal/ POM were tested, using the Low Dose X-ray (Lodox) scanner, to determine their radiolucency. All materials were found to be radiolucent enough for the manufacture of the Laxmeter structure as well as the load applicator in order to identify and measure the translation of the tibia with respect to the stationary femur. The Laxmeter allows for the measurement of the laxity of the MCL and LCL at multiple fixed degrees of flexion by providing the ideal patient position for testing. The next iteration of the device will present an affordable and complete Stress Radiography Device capable of measuring the laxity of all four major ligaments of the knee joint at multiple fixed degrees of flexion. Future work would include aesthetic considerations as well as an investigation into carbon-fibre-reinforced plastics

Introduction. Total knee arthroprasty (TKA) is an excellent treatment with osteoarthritis of the knee joint. The acquisition of joint stability after TKA is one of the most important factors to improve the patient's quality of life. Deep flexion of knee joint is often demanded in daily life, and stability in flexed knee position is also important. But there were few papers reporting about laxity in flexed knee position. This study aimed to analyze influence of pre-operative alignment on post-operative varus-valgus joint laxity in TKA. We investigated the varus-valgus laxity of knee joint throughout flexion intra-operatively before and after prosthetic implantation. Methods. A total of 20 knees underwent TKA using posterior-stabilised (PS) type component by the measured resection method were included in this study. The varus-valgus joint laxity of knee was measured using an intra-operative navigation system at every 10 ° throughout the range of movement under general anesthesia. We examined the correlations between the pre-operative femorotibial angle (FTA) and varus-valgus joint laxity by method of least squeres. We divided the patients group into two populations according to pre-operative FTA. Large FTA group had more than or equal to 186 °of pre-operative FTA. Small FTA group had less than 186 °pre-operative FTA. T- test was performed between those populations. Result. After TKA, mean FTA improved from 189.15 °(SD = 5.87 SD: Standard Deviation) to 172.65 °(SD = 1.59). All of patients were improved in the Knee Society Score (KSS) and range of motion (ROM) (Fig 1). There were significant positive correlations between the pre-operative FTA and varus-valgus joint laxity in flexion of 90 °(CC = 0.48, P < 0.05 CC: Correlation Coefficient P: probability value), 100 °(CC = 0.57, P < 0.01), 110 °(CC = 0.55, P < 0.05), and 120 °(CC = 0.57, P < 0.01). In the large FTA group, the varus-valgus joint laxities were larger than that of small FTA group in initial flexed position before TKA (Fig 2), whereas the varus-valgus joint laxities were larger in flexed position after TKA (Fig 3). Discussion. Our results showed that in patients who had large FTA and were underwent TKA using PS type component by the measured resection method, they had large varus-valgus joint laxities in flexed knee position. There is a possibility that the increase of laxity in the flexed knee position was due to acquisition of stability with releasing of medial collateral ligament in the extended knee position not but in flexed knee position. In this study we demonstrated correlations between the pre-operative FTA and varus-valgus joint laxity in flexed knee position. In the further study, we would like to investigate how the increasing laxities in the flexion knee position affect the clinical symptoms

This study aims to create a novel computational workflow for frontal plane laxity evaluation which combines a rigid body knee joint model with a non-linear implicit finite-element model wherein collateral ligaments are anisotropically modelled using subject-specific, experimentally calibrated Holzpfel-Gasser-Ogden (HGO) models. The framework was developed based on CT and MRI data of three cadaveric post-TKA knees. Bones were segmented from CT-scans and modelled as rigid bodies in a multibody dynamics simulation software (MSC Adams/view, MSC Software, USA). Medial collateral and lateral collateral ligaments were segmented based on MRI-scans and are modelled as finite elements using the HGO model in Abaqus (Simulia, USA). All specimens were submitted varus/valgus loading (0-10Nm) while being rigidly fixed on a testing bench to prevent knee flexion. In subsequent computer simulations of the experimental testing, rigid bodies kinematics and the associated soft-tissue force response were computed at each time step. Ligament properties were optimised using a gradient descent approach by minimising the error between the experimental and simulation-based kinematic response to the applied varus/valgus loads. For comparison, a second model was defined wherein collateral ligaments were modelled as nonlinear no-compression spring elements using the Blankevoort formulation. Models with subject-specific, experimentally calibrated HGO representations of the collateral ligaments demonstrated smaller root mean square errors in terms of kinematics (0.7900° +/− 0.4081°) than models integrating a Blankevoort representation (1.4704° +/− 0.8007°). A novel computational workflow integrating subject-specific, experimentally calibrated HGO predicted post-TKA frontal-plane knee joint laxity with clinically applicable accuracy. Generally, errors in terms of tibial rotation were higher and might be further reduced by increasing the interaction nodes between the rigid body model and the finite element software. Future work should investigate the accuracy of resulting models for simulating unseen activities of daily living

It is recommended in the TKA operation to balance the tension of soft tissues to make the rectangular gap in both flexion and extension because significant imbalance may result in eccentric stress on the polyethylene insert. However, no intensive research has been done on the medial and lateral laxity of the normal knee. X-ray of 50 normal knees were taken under the varus or valgus stress in both extension and flexion at 80 degrees. The angle of lines on the femoral condyles and tibia plateau was measured. The same methods were also done for the 20 osteoarthritis knees. In extension of the normal knees, the mean angle was 5.06 degrees in varus stress and was 2.46 degrees in valgus stress. In flexion of the normal knees, the mean angle was 5.04 degrees in varus stress and was 1.82 degrees in valgus stress. Therefore, the lateral laxity was significantly larger than the medial laxity in both extension and flexion (p< 0.0001). The lateral laxity was significantly larger also in osteoarthritis knees (p< 0.0001). There are some arguments about the priority to make the perfect rectangular gaps. The methods to measure the tension of soft tissues during the operation are not accurate and does not always reflect the post-operative tensions. Furthermore, the tension during the operation may be different from dynamic phase such as walking and standing. The present study showed that the mediolateral laxity was asymmetrical in the normal knees. This imbalance may be necessary for the medial pivot movement of the normal knee. These results suggest that a slight lateral laxity is acceptable during TKA operation and may be beneficial to achieve the normal kinematics especially for the cruciate retaining prosthesis

Introduction. The aim of this study was to quantify mid-flexion laxity in a total knee arthroplasty with an elevated joint line, as compared to a native knee and a TKA with joint line maintained. Our hypothesis was joint line elevation of 4mm would increase coronal plane laxity throughout mid-flexion in a pattern distinct from the preoperative knee or in a TKA with native joint line. Methods. Six fresh-frozen cadaver legs from hip-to-toe underwent TKA with a posterior stabilised implant (APEX PS, OMNIlife Science, Inc.) using a computer navigation system equipped with a robotic cutting-guide, in this controlled laboratory cadaveric study. After the initial tibial and femoral resections were performed, the flexion and extension gaps were balanced using navigation, and a 4mm recut was made in the distal femur. The remaining femoral cuts were made, the femoral component was downsized by resecting an additional 4mm of bone off the posterior condyles, and the polyethylene was increased by 4mm to create a situation of a well-balanced knee with an elevated joint line. The navigation system was used to measure overall coronal plane laxity by measuring the mechanical alignment angle at maximum extension, 30, 45, 60 and 90(of flexion, when applying a standardised varus/valgus load of 9.8Nm across the knee using a 4kg spring-load located at 25cm distal to the knee joint line. Laxity was also measured in the native knee, as well as the native knee after a standard approach during TKA which included a medial release. Coronal plane laxity was defined as the absolute difference (in degrees) between the mean mechanical alignment angle obtained from applying a standardised varus and valgus stress at 0, 30, 45, 60 and 90(. Results. In full extension, 30(, 45(, 60(, and 90(of flexion, the native knee showed coronal plane laxity of 2.4, 6.5, 7.0, 7.8, and 9.5(, respectively. The above soft tissue releases produced increased laxity in extension and 30(of flexion. After TKA, the mean coronal plane motion was decreased at all flexion angles and remained consistent throughout arc of motion. With 4mm of joint line elevation, coronal-plane laxity increased by a mean of 1.4° at 30° of flexion (p=.0.0103), 1.5° at 45° of flexion (p=.0.0001), and 1.3° at 60° of flexion (p=0.0018) compared to the TKA with native joint line. Conversely, there was no difference in laxity at 0° and 90° between the initial TKA and after 4mm joint line elevation. Conclusions. The computer navigated, well balanced TKA with a maintained joint line showed consistent coronal plane laxity throughout all flexion angles, while the native knee showed greater laxity at 90° than in mid-flexion. Further, as suggested by retrospective clinical reports, this cadaver study confirms that joint line elevation of only 4mm results in greater coronal plane laxity in mid-flexion. These finding suggest that maintaining the joint line in TKA is necessary to avoid increased mid-flexion, coronal plane laxity

INTRODUCTION. There are many factors which contribute to function after TKA. In this study we focus on the effect of varus-valgus (VV) balancing measured externally. A loose knee can show instability (Sharkey 2014) while too tight, flexion can be limited. Equal lateral-medial balancing at surgery leads to a better result (Unitt 2008; Gustke 2014), which is generally the surgical goal. Indeed similar varus and valgus laxity angles have been found in most studies in vitro (Markolf 2015; Boguszewski 2015) and in vivo (Schultz 2007; Clarke 2016; Heesterbeek 2008). The angular ranges have been 3–5 degrees at 10–15 Nm of knee moment, females having the higher angles. The goal of this study was to measure the varus and valgus laxity, as well as the functional outcome scores, of two cohorts; well-functioning total knees after at least one year follow-up, and subjects with healthy knees in a similar age group to the TKR's. Our hypothesis was that the results will be equal in the two groups. METHODS & MATERIALS. 50 normal subjects average age 66 (27 male, 23 female) and 50 TKA at 1 year follow-up minimum average age 68 years (16 male, 34 female) were recruited in this IRB study. The TKA's were performed by one surgeon (PAM) of one TKA design, balancing by gap equalization. Subjects completed a KSS evaluation form to determine functional, objective, and satisfaction scores. Varus and valgus measurements were made using the Smart Knee Fixture (Figure 1)(Borukhov 2016) at 20 deg flexion with a moment of 10 Nm. RESULTS. The statistical results are summarized in table 1. There was no significant difference in either varus or valgus laxity between the two groups (p= 0.9, 0.3 respectively). Pearson's correlation coefficient between varus and valgus laxity of the healthy group was 0.42, while for the TKA group was 0.55. In both cohorts varus laxity was significant higher than valgus laxity (p= 0.001 for healthy subjects and p=0.0001 for TKA). The healthy group had higher functional and objective KSS scores (p= 0.005, and p=0.004 respectively), but the same satisfaction scores as the TKA (p=0.3) (Table 2). No correlation was found between the total laxity of the TKA group and the KSS scores (functional, objective and satisfaction). Total laxity in females was significantly higher than in males in the healthy group, but no differences was found in the TKA group. DISCUSSION. The hypothesis of equal varus and valgus angles in the 2 groups was supported. The larger varus angle implied a less stiff lateral collateral compared with the medial collateral. If the TKA's were balanced equally at surgery, it is possible there was ligament remodeling over time. However the functional scores were inferior for the TKA compared with normal. This finding has not been highlighted in the literature so far. The causes could include weak musculature (Yoshida 2013), non-physiologic kinematics due to the TKA design, or the use of rigid materials in the TKA. The result presents a challenge to improve outcomes after TKA. For figures/tables, please contact authors directly.

Purpose: We present the results obtained in a consecutive series of 48 patients who underwent surgical repair for chronic posterior knee laxity between 1995 and 2000. Material and methods: The series included 33 men and 15 women, men age 29 years at the time of trauma. Mean duration of knee laxity before surgery was 32 months: 26 patients had undergone different procedures but without reconstruction of the posterior cruciate ligament (PCL). Preoperative physical examination revealed direct posterior laxity (DPL in 17 knees, posteroposterolateral laxity (PPLL) in 17, posteroposteromedial laxity (PPML) in 6, global posterior laxity (GPL) in one, and complex anteroposterier laxity (APL) in 7. The PCL was reconstructed arthroscopically using a two-strand graft using either the patellar tendon for the oldest cases (n=22) or the quadriceps tendon (n=26). Peripheral involvement was repaired by tension, reinforcement, or reconstruction with an autologous tendon graft. In the event of associated genu varum, a tibial osteotomy for normo-correction was also performed prior to the ligamentoplasty. Outcome was assessed with the IKDC 93 criteria and posterior laxity was measured on the stress x-rays. Results: All patients were followed at least one year. Mean follow-up was 24 months. There were no postoperative complications. The principal results for the first three types of laxity, DPL, PPLL, and PPML, were as follows. Preoperative subjective evaluation for the entire series: 12C, 36D; symptoms: 6B, 10C, 32D; global score: 9C, 39D; laxity: 11.4±4.3 mm. DPL: subjective evaluation: 4C, 13D; symptoms: 2B, 2C, 12D; global score: 4C, 14D; laxity 9.9±3.3 mm. PPLL subjective evaluation: 7C, 10D; symptoms: 2B, 6C, 9D; global score: 3C, 14D; laxity 11.7±4.6 mm. PPML subjective evaluation: 6D; symptoms: 1B, 5D; global score: 6D; laxity 13.0±3.7 mm. At last follow-up for the entire series, subjective evaluation: 9A, 27B, 12C; symptoms: 6A, 26B, 14C; global score: 1A, 25B, 21C, 1D; laxity: 5.0±3.0 mm, giving a 62% gain. DPL subjective evaluation: 6A, 8B, 3C; symptoms: 5A, 10B, 2C; global score: 1A, 10B, 6C; laxity: 4.0±2.0 mm, giving a 62% gain. PPLL subjective evaluation: 2A, 11B, 14C; symptoms: 3A, 10B, 4C; global score: 4B, 12C, 1D: laxity: 5.7±3.5 mm, giving a 54% gain. PPML subjective evaluation: 6B; symptoms: 6B; global score: 5B, 1C; laxity: 5.9±3.0 mm, giving a 61% gain. For all parameters considered, category D disappeared at last follow-up in almost all knees. This improvement over the preoperative status was statistically significant (p=0.001). Discussion: Reconstruction of the PCL with a two-strand graft combined with compensation of peripheral laxity and axial deviations provides significant correction in laxity similar to that obtained for the anterior cruciate ligament. Despite these satisfactory results, posteroposterolateral laxity has a less favourable prognosis than the other types of laxity

There are many factors which contribute to function after TKA. In this study we focus on the effect of varus-valgus (VV) balancing measured externally. A loose knee can show instability (Sharkey 2014) while too tight, flexion can be limited. Equal lateral-medial balancing at surgery leads to a better result (Unitt 2008; Gustke 2014), which is generally the surgical goal. Indeed similar varus and valgus laxity angles have been found in most studies in vitro (Markolf 2015; Boguszewski 2015) and in vivo (Schultz 2007; Clarke 2016; Heesterbeek 2008). The angular ranges have been 3–5 degrees at 10–15 Nm of knee moment, females having the higher angles. The goal of this study was to measure the varus and valgus laxity, as well as the functional outcome scores, of two cohorts; well-functioning total knees after at least one year follow-up, and subjects with healthy knees in a similar age group to the TKR's. Our hypothesis was that the results will be equal in the two groups. 50 normal subjects average age 66 (27 male, 23 female) and 50 TKA at 1 year follow-up minimum average age 68 years (16 male, 34 female) were recruited in this IRB study. The TKA's were performed by one surgeon (PAM) of one TKA design, balancing by gap equalization. Subjects completed a KSS evaluation form to determine functional, objective, and satisfaction scores. Varus and valgus measurements were made using the Smart Knee Fixture (Borukhov 2016) at 20 deg flexion with a moment of 10 Nm. The statistical results demonstrated that there was no significant difference in either varus or valgus laxity between the two groups (p= 0.9, 0.3 respectively). Pearson's correlation coefficient between varus and valgus laxity of the healthy group was 0.42, while for the TKA group was 0.55. In both cohorts varus laxity was significant higher than valgus laxity (p= 0.001. e. −5. for healthy subjects and p=0.0001 for TKA). The healthy group had higher functional and objective KSS scores (p= 0.005. e. −4. , and p=0.004. e. −5. respectively), but the same satisfaction scores as the TKA (p=0.3). No correlation was found between the total laxity of the TKA group and the KSS scores (functional, objective and satisfaction). Total laxity in females was significantly higher than in males in the healthy group, but no differences was found in the TKA group. The hypothesis of equal varus and valgus angles in the 2 groups was supported. The larger varus angle implied a less stiff lateral collateral compared with the medial collateral. If the TKA's were balanced equally at surgery, it is possible there was ligament remodeling over time. However the functional scores were inferior for the TKA compared with normal. This finding has not been highlighted in the literature so far. The causes could include weak musculature (Yoshida 2013), non-physiologic kinematics due to the TKA design, or the use of rigid materials in the TKA. The result presents a challenge to improve outcomes after TKA

Functional joint stability and accurate component alignment are crucial for a successful clinical outcome after TKA. However, there are few methods to evaluate joint stability during TKA surgery. Activities of daily living often cause mechanical load to the knee joint not only in full extension but also in mid-flexion. Computer navigation systems are useful for intra-operative monitoring of joint positioning and movements. The purpose of this study was to compare the varus-valgus stability between knees treated with cruciate-retaining (CR) and posterior-stabilized (PS) TKA at different angles in the range of motion (ROM) especially in mid-flexion, using the navigation technique. Thirty two knees that underwent TKA with computer navigation technology (precisionN Knee Navigation Software version 4.0, Stryker, Kalamazoo, MI) were evaluated (CR:16; PS:16). The investigator gently applied physiologically allowable maximal manual varus-valgus stress to the knee without angular acceleration, while moving the leg from full extension to flexion, and the mechanical femoral-tibial angle was measured automatically by the navigation system at every 10 degrees throughout the ROM. This measurement cycle was repeated for 3 to 4 times, and maximal varus-valgus laxity was determined as the sum of varus and valgus stress angles for each of the predetermined knee flexion angles. The results of the navigated measurements were used to evaluate varus-valgus instability throughout the ROM and the differences in varus-valgus laxity between pre-TKA (Prior to bone cutting, after navigation registration and suturing of the joint capsule) and post-TKA(After confirming that the TKA components and inserts were firmly placed in an appropriate position, the surgical incision was completely closed). The differences in varus-valgus laxity between the CR and PS groups were compared using the Student's t-test. The knees examined showed the greatest preoperative laxity at 20 to 40 degrees of flexion, with no statistically significant difference between the CR and PS groups (See Figure 1). However, postoperative assessment revealed that PS knees had more varus-valgus laxity than CR knees at all ROM angles examined, and the differences were statistically significant in the flexion range of 10 to 70 degrees (See Figure.2). The differences between preoperative and postoperative joint laxity were analyzed separately for the CR and PS groups. After CR-TKA, joint laxity decreased across all degrees of knee flexion. The differences between preoperative and postoperative joint laxity were statistically significant for the flexion range of 110 to 120 degrees (See Figure.3). On the other hand, knees treated with PS-TKA showed an increase in joint laxity for the flexion range of 10 to 90 degrees. The differences between the preoperative and postoperative values were statistically significant for the flexion range of 10 to 20 degrees in PS-TKA (See Figure.4). We successfully evaluated varus-valgus laxity in this study using a navigation system. The results showed that PS knees had greater varus-valgus laxity than CR knees throughout the ROM, and the differences were statistically significant for the flexion range of 10 to 70 degrees. Altogether, we conclude that PS knees have more mid-flexion laxity than CR knees

Introduction: We performed a randomized, prospective, stress arthrometric study on 60 knees in 60 patients who had received mobile-bearing prostheses to determine the changes in varus–valgus laxity with time using a Telos arthrometer, and to evaluate the relationship between laxity and retention of the posterior cruciate ligament (PCL). Materials and Methods: Thirty patients received PCL-retaining (PCLR) prostheses with an average of 75 months of follow-up (range: 60–106 months). Another 30 patients received PCL-sacrificing (PCLS) prostheses with an average of 78 months of follow-up (range: 60–109 months). In all patients, the preoperative diagnosis was osteoarthritis. The coronal conformity of the PCLR and PCLS designs was similar. All of the total knee arthroplasty (TKA) procedures were judged to be clinically successful (Hospital for Special Surgery scores: PCLR 92 ±4 points, PCLS 92 ±3 points). The patients had no clinical complications. Varus–valgus laxity was measured with the knee in extension six months, one year, two years, and five years after surgery. The intrasubject error was less than 1°. Results: Varus laxity measurements with the PCLR prosthesis at six months, one year, two years, and five years were 3.7°, 4.0°, 4.1°, and 4.2°, respectively. With valgus laxity, measurements at the same time periods were 3.5°, 3.5°, 3.5°, and 3.6°, respectively. Varus laxity measurements with the PCLS prosthesis at six months, one year, two years, and five years were 4.3°, 4.3°, 4.3°, and 4.4°, respectively. With valgus laxity, measurements at the same time periods were 3.7°, 3.4°, 3.5°, and 3.6°, respectively. There were no significant differences in varus and valgus laxity between the PCLR and PCLS groups using repeated measure ANOVA methods (p > 0.05). Discussion: Coronal laxity did not change with time in patients who had good clinical results. There were no significant differences between the PCLR and PCLS groups in changes in the varus-valgus laxity for a long time after the patients received prostheses. Therefore, we conclude that the PCL doesn’t affect coronal stability in extension, and that the characteristics of the component geometry may act as a resistance factor. Our results suggest that surgeons should appreciate the importance of obtaining balanced coronal laxity for long-term success following mobile-bearing TKA

1. General joint laxity affecting more than three joints was found in 7 per cent of normal schoolchildren. Similar laxity was found in fourteen of a random series of forty-eight girls, and in nineteen of twenty-six boys, with non-familial congenital dislocation of the hip. Such laxity was also found in four of seven girls and five of seven boys with familial (first degree relative affected) congenital dislocation of the hip. 2. It is concluded that persistent generalised joint laxity, which is often familial, is an important predisposing factor to congenital dislocation of the hip in boys. It is less important in girls, except perhaps in familial cases, as in girls there is an alternative temporary hormonal cause of joint laxity

Introduction:. One of the important factors for success in TKA is to achieve proper stability of the knee joint. It is currently unknown that how much joint laxity exists in mid-range to deep knee flexion, postoperatively. We hypothesized that retaining the PCL or not during TKA has an influence on the postoperative joint laxity from mid-range to deep knee flexion. The purpose of this study was to investigate the postoperative coronal joint laxity throughout the full range of motion by the 3-dimensional in vivo analysis, both in PS and CR TKA. Methods:. We implanted 5 knees with a PS TKA using a NexGen LPS-flex and 5 knees with a CR TKA using a NexGen CR-flex. All of them were the osteoarthritis patients. We performed all operations with a measured resection technique. Four weeks after TKA, the valgus- and varus-stress radiographic assessments were performed at the five flexion angles from full extension to maximum flexion. The patients sat on the radiolucent chair with their lower legs hanging down. The examiner held their thigh, and a force of 50N was applied 30 cm distal to the tibiofemoral joint. The series of static fluoroscopic images via a flat panel detector were stored digitally. A 3-dimentional to 2-dimentional techniqueusing an automated shape-matching algorithm was employed to determine the relative 3-dimentional positions of the femoral component and tibial component in each fluoroscopic image (KneeMotion; LEXI, Tokyo). On the coronal plane of the tibial component, the angle between the tangent line of the condyles of the femoral component and the tibial plateau was measured as the joint laxity for valgus (α valgus) or varus (α varus). The flexion angle between the femoral component and tibial component was also measured. Results:. The total laxity (α valgus + α varus) tended to increase until deep knee flexion in PS TKA. While in CR TKA, the total laxity tended to increase until mid-range of knee flexion and then decreased until maximum flexion (Fig. 1). PS TKA: In varus stress, the mean tilting angles were 2.4, 3.6, 3.6, 4.1, 5.4 degrees at −2.3, 25.3, 42.2, 72.1, 97.1 degrees of knee flexion, respectively. The tilting angle measured at maximum flexion was significantly larger than that measured at full extension (p < 0.05) (Fig. 2). CR TKA: In valgus stress, the mean tilting angles were 0.8, 2.8, 2.8, 2.0, 0.6 degrees at −6.4, 24.1, 35.8, 67.7, 87.8 degrees of knee flexion, respectively. The tilting angles measured at full extension and maximum flexion were significantly smaller than that measured at 24.1 and 35.8 degrees of knee flexion (p < 0.05) (Fig. 3). Discussion:. In PS TKA, joint laxity for varus at maximum flexion was significantly larger than that at full extension. While in CR TKA, joint laxity for varus indicated no significant differences among at each flexion angle. Moreover, joint laxity for valgus at full extension and maximum flexion were significantly smaller than that at mid-range flexion in CR TKA. Retaining the PCL during TKA has a strong influence on the postoperative coronal joint laxity especially in deep knee flexion

Introduction and Aims: To determine whether sagittal laxity has an effect on functional outcome following posterior cruciate retaining total knee replacement using two differing tibial insert designs. Method: Ninety-seven knees in 83 patients were reviewed clinically, radiologically and underwent KT1000 testing at minimum five-year follow-up post-TKA. Knee society, WOMAC and SF12 scores were calculated. The same femoral component (Duracon, Stryker) was used in all patients. Two differing tibial inserts were used (51 Condylar and 46 AP lipped). Results: The two groups were comparable for age, sex, Charnley category and Body mass index. There was no significant difference in knee society score, WOMAC scores, SF12 scores, knee flexion, posterior tibial slope or KT1000 laxity measurements between the two groups. Total laxity measured by KT1000 was 5mm in the AP lipped group and 4mm in the condylar group. There was no correlation between anterior, posterior or total laxity and functional outcome as measured by WOMAC, KSS, SF12 or knee flexion. Conclusion: Increased sagittal laxity does not have a strong influence on functional outcome following TKA. The differing tibial insert designs had no significant influence on laxity or function

Introduction. Clinical observations suggest mid-flexion instability may occur more commonly with rotating platform (RP) total knee arthroplasty (TKA), including increased revision rates and patient-reported instability and pain. We propose that increased gap laxity leads to liftoff of the lateral femoral condyle with decreased conformity between the femoral component and polyethylene (PE) insert surface leading to PE subluxation or dislocation. The objectives of this study were to define “at risk” loading conditions that predispose patients to PE insert subluxation or spinout, and to quantify the margin of error for flexion/extension gap laxity in preventing these adverse events under physiologic loading conditions. Methods. Biomechanical testing was performed on six fresh frozen cadaveric knees implanted with a posterior stabilized RP TKA using a gap balancing technique. Rotational displacement and torque were measured over time, while stiffness, yield torque, max torque and displacement were calculated using a post-processing, custom MatLab code. Revision with varying size femoral components (size 3–6) and PE insert thicknesses (10–15mm), by downsizing one step, were used to create a spectrum of flexion/extension gap mismatch. Each configuration was subjected to three loaded testing conditions (0°, 30° and 60° flexion) in balanced and eccentric varus loading, known to represent daily clinical function and “at risk” circumstances. Results. PE insert rotational instability was primarily determined by conformity and contact area between the femoral condyle and the upper surface of the PE insert. In this RP design, contact area is known to decrease with flexion greater than 35°, which predisposed to abnormal motion of the femur on PE insert (Figure 1). Under all flexion/extension gap testing conditions, PE insert rotational displacement significantly decreased with increasing knee flexion (differences ranged from 0.42 to 1.01cm, p<0.05), confirming that decreased conformity allows unintended motion to occur on the upper rather than the lower insert surface, as kinematically designed. This decrease in insert rotation was further exacerbated with eccentric medial-sided loading (differences ranged from 0.77 to 1.18cm, p<0.05). Yield torque (19.66±6.79N-m, p=0.033) and max torque (19.76±5.93N-m, p=0.014) significantly increased with increasing flexion from 0° to 60° under gap balanced conditions. Yield torque significantly decreased with greater flexion gap laxity at 60° of flexion (−24.82±5.96N-m, p=0.004). The depth of the lateral PE insert concavity (1.7–3.6mm) varied with insert size and thickness and determined femoral condylar capture. The lateral insert concavity defines a narrow margin of error in flexion/extension gap asymmetry leading to rotational insert instability, especially in smaller sized knees (size 3) where the jump height (1.7mm) is less than the insert sizing increment of 2.5mm. Conclusions. Contact area is known to decrease with flexion greater than 35° in this TKA-RP design. Flexion gap laxity further increased the risk of unintended top-side rotation of the femur on the insert, especially with increasing flexion and smaller components. In RP-TKA, in addition to medial-lateral gap symmetry and flexion-extension balance, a snug flexion gap with less than 2mm lateral laxity is critical to avoid insert instability and condylar escape with insert subluxation. For any figures or tables, please contact authors directly

Introduction. The objective of this study was to assess the effect of PCL resection on flexion-extension gaps, mediolateral soft tissue laxity, fixed flexion deformity (FFD), and limb alignment during posterior-stabilised total knee arthroplasty (TKA). Methods. This prospective study included 110 patients with symptomatic knee osteoarthritis undergoing primary robotic-arm assisted posterior-stabilised TKA. All operative procedures were performed by a single surgeon using a standard medial parapatellar approach. Optical motion capture technology with fixed femoral and tibial registration pins was used to assess gaps pre- and post-PCL resection in knee extension and 90 degrees knee flexion. This study included 54 males (49.1%) and 56 females (50.9%) with a mean age of 68 ± 6.2 years at time of surgery. Mean preoperative hip-knee-ankle deformity was 6.1 ± 4.4 degrees varus. Results. PCL resection increased the flexion gap more than the extension gap in the medial (2.4 ± 1.5mm vs 1.3 ± 1.0mm respectively, p<0.001) and lateral (3.3 ± 1.6mm vs 1.2 ± 0.9mm respectively, p<0.01) compartments. The gap differences following PCL resection created mediolateral laxity in flexion (gap difference: 1.1 ± 2.5mm, p<0.001) but not in extension (gap difference: 0.1 ± 2.1mm, p=0.51). PCL resection improved overall FFD (6.3 ± 4.4° preoperatively vs 3.1 ± 1.5° postoperatively, p<0.001). There was a strong positive correlation between preoperative FFD and change in FFD following PCL release (Pearson correlation coefficient = 0.81, p<0.001). PCL resection did not affect overall limb alignment (change in alignment: 0.2 ± 1.2 degrees valgus, p=0.60). Conclusion. PCL resection creates flexion-extension mismatch by increasing the flexion gap proportionally more than the extension gap. The increase in the lateral flexion gap is greater than the increase in medial flexion gap, which creates mediolateral laxity in flexion. Improvements in FFD following PCL resection are dependent on the degree of deformity prior to PCL resection. Bone resection, implant positioning, and periarticular soft tissue balancing should account for these changes in flexion-extension gaps, mediolateral laxity, and fixed flexion deformity following PCL resection in PS TKA. For figures, tables, or references, please contact authors directly

Introduction. The aim of this study was to quantitatively analyze the amount coronal plane laxity in mid-flexion that occurs with a loose extension gap in TKA. In the setting of a loose extension gap, we hypothesized that although full extension is achieved, a loose extension gap will ultimately lead to increased varus and/or valgus laxity throughout mid flexion. Methods. After obtaining IRB approval, six fresh-frozen cadaver legs from hip-to-toe underwent TKA with a posterior stabilized implant (APEX PS OMNIlife Science, Inc.) using a computer navigation system equipped with a robotic cutting-guide, in this controlled laboratory cadaveric study. After the initial tibial and femoral resections were performed, and the flexion and extension gaps were balanced using navigation, a 4 mm distal recut was made in the distal femur to create a loose extension gap (using the same thickness of polyethylene as the well-balanced case). Real implants were used in the study to eliminate error in any laxity inherent to the trials. The navigation system was used to measure overall coronal plane laxity by measuring the mechanical alignment angle at maximum extension, 30, 45, 60 and 90 degrees of flexion, when applying a standardized varus/valgus load of 9.8 [Nm] across the knee using a 4 kg spring-load located at 25 cm distal to the knee joint line. (Figure 1). Coronal plane laxity was defined as the absolute difference (in degrees) between the mean mechanical alignment angle obtained from applying a standardized varus and valgus stress at 0, 30, 45, 60 and 90 degrees. Each measurement was performed three separate times. Two tailed student t-tests were performed to analyze whether there was difference in the mean mechanical alignment angle at 0°, 30°, 45°, 60°, and 90° between the well balanced scenario and following a 4 mm recut in the distal femur creating a loose extension gap. Results. In the setting of a loose extension gap (4 mm distal recut), overall coronal-plane laxity was increased by a mean of 3.6° at 30° of flexion, 3.4° at 45° of flexion, and 2.8° at 60° of flexion (p < 0.05 for each flexion angle). (Figure 2) However, there was no difference in coronal plane laxity between the well-balanced TKA and the TKA with a loose extension gap at 0° and 90° of flexion, when applying a standardized varus and valgus load. Conclusions. Using a reliable, accurate, and reproducible method of measuring coronal plane laxity, we have shown that in the setting of a loose extension gap during total knee arthroplasty, coronal plane laxity will be significantly higher in mid-flexion compared to the well balanced state

Introduction. The aim of this study was to quantitatively analyze the amount coronal plane laxity in mid-flexion that occurs in a well-balanced knee with an elevated joint line of 4 mm. In the setting an elevated joint line, we hypothesized that we would observe an increased varus and/or valgus laxity throughout mid flexion. Methods. After obtaining IRB approval, nine fresh-frozen cadaver legs from hip-to-toe underwent TKA with a posterior stabilized implant (APEX PS, OMNIlife Science, Inc.) using a computer navigation system equipped with a robotic cutting-guide, in this controlled laboratory cadaveric study. After the initial tibial and femoral resections were performed, the flexion and extension gaps were balanced using navigation, and a 4 mm recut was made in the distal femur. The remaining femoral cuts were made, the femoral component was downsized by resecting an additional 4 mm of bone off the posterior condyles, and the polyethylene was increased by 4 mm to create a situation of a well-balanced knee with an elevated joint line. Real implants were used in the study to eliminate any inherent error or laxity in the trials. The navigation system was used to measure overall coronal plane laxity by measuring the mechanical alignment angle at maximum extension, 30, 45, 60 and 90 degrees of flexion, when applying a standardized varus/valgus load of 9.8 [Nm] across the knee using a 4 kg spring-load located at 25 cm distal to the knee joint line (Figure 1). Coronal plane laxity was defined as the absolute difference (in degrees) between the mean mechanical alignment angle obtained from applying a standardized varus and valgus stress at 0, 30, 45, 60 and 90 degrees. Each measurement was performed three separate times. Two tailed student t-tests were performed to analyze whether there was difference in the mean mechanical alignment angle at 0°, 30°, 45°, 60°, and 90° between the well balanced scenario and following a 4 mm joint line elevation with an otherwise well balanced knee. Results. In the setting of a 4 mm elevated joint line, overall coronal-plane laxity was increased by a mean of 1.5° at 45° of flexion, and 1.3° at 60° of flexion (p < 0.05 for each flexion angle). (Figure 2) However, there was no difference at 0° and 90° in the coronal plane laxity between the well-balanced TKA and the TKA that was well balanced but had a 4 mm elevated joint line. Conclusions. Using a reliable, accurate, and reproducible method of measuring coronal plane laxity, we have shown that in the setting of a an elevated joint during total knee arthroplasty, regardless if the knee is well balanced in full extension and 90° of flexion, coronal plane laxity will be significantly higher in mid-flexion compared to the well balanced state

Subtalar arthrodesis known as talocalcaneal fusion is an end-stage treatment for adult hind foot pathologies. The goal of the arthrodesis is to restrict the relative motion between bones of the subtalar joints, aiming to reduce pain and improve function for the patient. However, the change of the subtalar structures through the fusion is considered a disturbance to the joint biomechanics, which have been suggested to affect the biomechanics of the adjacent joints. However, no quantitative data are available to document this phenomenon. The purpose of the current study was to quantify the effects of subtalar arthrodesis on the laxity and stiffness of the talocrural joint in vitro using a robot-based joint testing system (RJTS) during anterioposterior (A/P) drawer test. Six fresh frozen ankle specimens were used in this study. The lateral tissues of the specimens were removed but the anterior and posterior talofibular ligaments and calcaneofibular ligament were kept intact. A/P drawer tests were performed on each of the specimens at neutral position, 5° and 10° of dorsiflexion, and 5?and 10?of plantarflexion using a robot-based joint testing system (RJTS), before and after subtalar arthrodesis. The RJTS enabled unconstrained A/P drawer testing at the prescribed ankle position while keeping the proximal/distal and lateral/medial forces, and varus/valgus and internal/external moments to be zero. This was achieved via a force-position hybrid control method with force and moment control, which has been shown to be more accurate than other existing force-position hybrid control methods. The target A/P force applied during the A/P drawer test was 100N in both anterior and posterior directions. The stiffness and laxity were calculated from the measured force and displacement data. The anterior and posterior stiffness of the talocrural joint were defined as the slope beyond 30% of the target A/P force, and the peak displacements quantified the laxity of the joint. Comparisons of laxity and stiffness between the intact and fusion ankle specimens were performed using Wilcoxon signed rank test (SPSS 19.0, IBM, USA) and a significance level of 0.05 was set. Subtalar arthrodesis did not lead to significant changes in the stiffness and laxity in both anterior and posterior directions (P>0.05). The mean anterior stiffness before arthrodesis was 9.54±1.17 N/mm and was 10.35±2.40 N/mm after arthrodesis. The mean anterior displacements before and after arthrodesis were 9.68±0.94 mm and 8.97±1.42 mm, respectively. Subtalar arthrodesis did not show significant effects on the A/P laxity and stiffness of the talocrural joint in both anterior and posterior directions. This may imply that the motion of the subtalar joints do not have significant effects on the A/P stability of the talocrural joint, which is the main joint of the ankle complex. This agrees with the anatomical roles of the subtalar joints which provide mainly the varus/valgus motions for the ankle complex. The current study provides a basis for further studies needed to evaluate the effects subtalar arthrodesis on the varus/valgus stability

To determine whether increased sagittal laxity has an effect on functional outcome following posterior cruciate retaining total knee replacement using two differing tibial insert designs. Ninety-seven patients were reviewed clinically, radiologically and underwent KT1000 testing of their TKR at a minimum follow up of 5 years (mean 6.5 yrs). The femoral component design was the same in all patients (Duracon/PCA). Fifty two patients had a relatively flat tibial insert design (group 1), while 45 patients had an AP lipped insert (group 2) following a change in design in 1995. The 2 groups were comparable for age, sex, Charnley category, BMI, tibial slope and follow up. There was no significant difference in laxity measurements, IKS or WOMAC scores between the groups. There was no significant correlation between laxity and outcome score or flexion range. Increased sagittal laxity in a knee replacement does not have a strong influence on functional outcome. The differing tibial insert designs had no significant effect on either laxity or function

Joint laxity was quantified by measuring the distance from the thumb tip to the forearm during passive apposition in 500 normal Southern Chinese women. Joint laxity was found to have a normal distribution throughout the population and to decrease with age. When 109 Chinese girls with idiopathic adolescent scoliosis were similarly tested they were found to have significantly more laxity, suggesting that the two conditions are associated

The aim of an anterior cruciate ligament (ACL) reconstruction is to regain functional stability of the knee following ACL injury, ideally allowing patients to return to their pre-injury level of activity. The purpose of this study was to assess clinical, functional and patient-centered outcomes a minimum of 1-year following ACL reconstruction. This study assessed for relationships between post-operative ACL graft laxity, functional testing performance, and scores on the ACL Quality of Life (ACL-QOL) questionnaire. A prospective cohort study design (n = 1938) was used to gather data on clinical laxity, functional performance and quality of life outcomes. Post-operative ACL laxity assessment using the Lachman and Pivot-shift tests was completed independently on each patient by a physiotherapist and an orthopaedic surgeon at a minimum of 12-months post-operatively. A battery of functional tests was performed including single leg balance, single leg landing, 4 single-leg hop tests, and tuck jumps. The hop tests provided a comparative assessment of limb-to-limb function including a single hop for distance, a 6m timed hop, a triple hop for distance, and a triple crossover hop. Patients com¬pleted the ACL-QOL at the 12-month and 24-month post-operative appointments. Descriptive and demographic data were collected for all patients. The degree and frequency of post-operative laxity was calculated. A Pearson r correlation coefficient was employed to determine the relationship between the presence of post-operative laxity and the ACL-QOL scores, between the battery of functional tests and the ACL-QOL scores, as well as between the functional tests and the laxity assessments. Data was gathered for 1512/1938 patients (78%). At clinical assessment a minimum of 1-year post-operatively, 13.2% of patients demonstrated a positive Lachman and/or Pivot-shift test. The mean ACL-QOL score for patients with no ACL laxity was 80.8/100, for patients with a positive Lachman or Pivot-shift test the mean score was 72.3/100, and for patients with both positive Lachman and Pivot-shift tests the score was 66.9/100. Pearson r correlation coefficient demonstrated a significant relationship between the presence of ACL graft laxity and ACL-QOL score (p < 0.05). Statistically significant correlations were evident between all of the operative limb single-leg hop tests and the post-operative ACL-QOL scores (p < 0.05). Statistically significant correlations were evident between the operative limb triple-hop tests and presence of ACL graft laxity (p < 0.05). Patients with clinically measurable ACL graft laxity demonstrate lower ACL-QOL scores as well as lower performance on a battery of functional tests. The disease-specific outcome measure was strongly correlated to the patient's ability to perform single-limb functional tests, indicating that the ACL-QOL score accurately predicted level of function

Aim To describe the presentation, clinical signs and arthroscopic features of isolated laxity of the PLC. Methods The records of 50 patients who had a reconstruction for isolated laxity of the PLC were reviewed. Any patient with injuries to the anterior cruciate, posterior crucicate or lateral collateral ligaments were excluded. ResultsHistory: • 21 patients could not remember an injury. • 12 patients had twisting/squatting injuries. • 17 patients had sporting injuries. Presenting Symptoms The commonest presenting symptoms were associated with overloading the anterior structures of the knee. These presenting symptoms tended to overshadow symptoms of instability which were quite subtle and usually only emerged on direct questioning or after painful lesions had been dealt with arthroscopically. Clinical Signs All patients had increased posterior translation of the tibia compared to the other side when the knee was examined in 20° of flexion using a modified Lachman test. Arthroscopic Features The lateral compartment opened easily in 38 (76%) and the posterior half of the lateral meniscus subluxed as far as the equator of the lateral femoral condyle in 32 (64%). Discussion When the knee is held in 20° of flexion, posterior translation of the tibia is prevented by the structures in the posterolateral corner. A modification of the Lachman test is described which easily demonstrates laxity of the PLC to both clinician and patient. Conclusion Laxity of the PLC is a common clinical finding, easily detected by a modification of the Lachman test. Patients may present without a history of injury, complaining of pain at the front of the knee and with subtle symptoms of instability. Laxity of the PLC should be considered in patients with recurrent or persistent symptoms following arthroscopy

Knee laxity following anterior cruciate ligament (ACL) injury is a complex phenomenon influenced by various biomechanical and anatomical factors. The contribution of soft tissue injuries – such as ligaments, menisci, and capsule – has been previously defined, but less is known about the effects of bony morphology. (Tanaka et al, KSSTA 2012) The pivot shift test is frequently employed in the clinical setting to assess the combined rotational and translational laxity of the ACL deficient knee. In order to standardise the maneuver and allow for reproducible interpretation, the quantitative pivot shift test was developed. (Hoshino et al, KSSTA 2013) The aim of this study is to employ the quantitative pivot shift test to determine the effects of bone morphology as determined by magnetic resonance imaging (MRI) on rotatory laxity of the ACL deficient knee. Fifty-three ACL injured patients scheduled for surgical reconstruction (36 males and 17 females; 26±10 years) were prospectively enrolled in the study. Preoperative magnetic resonance imaging (MRI) scans were reviewed by two blinded observers and the following parameters were measured: medial and lateral tibial slope, tibial plateau width, femoral condyle width, bicondylar width, and notch width. (Musahl et al. KSSTA 2012). Preoperatively and under anaesthesia, a quantitative pivot shift test was performed on each patient by a single experienced examiner. An image analysis technique was used to quantify the lateral compartment translation during the maneuver. Subjects were classified as “high laxity” or “low laxity” based upon the median value of lateral compartment translation. (Hoshino et al. KSSTA 2012) Independent t-tests and univariate logistic regression were used to investigate the relationship between the pivot shift grade and various features of bone morphology. Statistical significance was set at p<0.05. A high inter-rater reliability was observed in all MRI measurements of bone morphology (ICC=0.72–0.88). The median lateral compartment translation during quantitative pivot shift testing was 2.8mm. Twenty-nine subjects were classified as “low laxity” (2.8mm). The lateral tibial plateau slope was significantly increased in “high laxity” patients (9.3+/−3.4mm versus 6.1+/−3.7mm; p<0.05). No other significant difference in bone morphology was observed between the groups. This study employed an objective assessment tool – the quantitative pivot shift test – to assess the contribution of various features of bone morphology to rotatory laxity in the ACL deficient knee. Increased lateral tibial plateau slope was shown to be a significant independent predictor of high laxity. These findings could help guide treatment strategies in patients with high grade rotatory laxity. Further research into the role of tibial osteotomies in this sub-group is warranted

A randomized, prospective stress arthrometric study was done on 60 knees in 60 patients, using a Telos arthrometer to determine the changes of varus-valgus laxity with time and to evaluate the relationship between laxity and retention of posterior cruciate ligament (PCL) using mobile bearing prostheses. Thirty knees had PCL -retaining (PCLR) with an average 75 months follow-up (range; 60–106 months) and 30 had PCL-sacrificing (PCLS) prostheses with an average 78 months (range; 60–109 months). In all patients, the preoperative diagnosis was osteoarthritis. The coronal conformity of the PCLR and PCLS designs was similar. All of the TKA procedures were judged clinically successful (Hospital for Special Surgery scores: PCLR 92 ±4 points, PCLS 92 ±3 points). The patients had no clinical complications. Varus-valgus laxity was measured with the knee in extension at 6 months, 1 year, 2 year and 5 year after surgery. The intrasubject error was less than 1 degree. Laxity with PCLR at 6 months, 1, 2 and 5 years was 3.7, 4.0, 4.1, 4.2 degrees with varus, 3.5, 3.5, 3.5, 3.6 degrees with valgus laxity. Laxity with PCLS was 4.3, 4.3, 4.3, 4.4 degrees with varus, 3.7, 3.4, 3.5, 3.6 degrees with valgus laxity. The changes of the varus and valgus laxity had no significant differences in both PCLR and PCLS groups using a repeated measure ANOVA methods (p> 0.05). The coronal laxity has proved to be no changes with time for the patients who have clinical good results. The changes of the varus-valgus laxity for long timehad no significant differences in both PCLR and PCLS groups. Therefore, we conclude that the PCL doesn’t affect coronal stability in Extension and that the characteristics of the component geometry may act as a resistance factor. We surgeons should have a new understanding of the importance to obtain the balanced coronal laxity for successful mobile-bearing TKA for long period

This study was performed to measure intra-operative varus-valgus laxities from 0° to 90° of flexion during cruciate retaining total knee arthroplasty (TKA) using the modified balanced gap technique. Forty nine patients awaiting unilateral TKA for osteoarthritis were enrolled into this prospective study. Flexion and extension gaps were measured at full extension and at 90° of flexion using a tensioning device before femoral bone cutting. After implantation and closing the medial parapatellar arthrotomy, varus-valgus laxities at 0, 30, 60 and 90° of flexion were also measured using a navigation system. Mean total varus-valgus laxities were significantly less at 0° of flexion (3.8±1.7°) than at the other selected flexion angles. Mean varus laxity was peaked at 3.1±2.2° at 60° of flexion and reached a nadir of 2.0±1.0° at 0° of flexion, which represented a significant difference. On increasing flexion from 0° to 60°, mean valgus laxity increased from 1.8±1.3° to 2.9±1.6°, which was significant, but no significant difference was found for other angles. The use of the balanced gap technique for cruciate retaining TKA using a navigation system, which allows accurate soft tissue balancing via real time gap size feedback, could be helpful for achieving good in vivo laxities throughout range of motion without significant mid flexion laxity

We measured the sagittal laxity in 70 knee replacements at least six months after surgery, using a KT 1000 arthrometer. With an unconstrained prosthesis (the Oxford meniscal knee) anteroposterior stability was normal in joints known to have intact cruciate ligaments. There was increased laxity in those which lacked an anterior cruciate ligament. In knees with an intact anterior cruciate ligament, sagittal laxity did not increase with time

Background. To improve implant positioning in total knee arthroplasty (TKA) patient-specific instrumentation (PSI) has been introduced as alternative for conventional instrumentation (CI). Though the PSI technique offers interesting opportunities in TKA, there is no consensus about the effectiveness of PSI in comparison with CI and results concerning soft-tissue balancing remain unclear. Therefore, the primary aim of the present study was to investigate the varus-valgus laxity in extension and flexion in patients receiving a TKA using PSI compared with CI. Additionally, radiological, clinical and functional outcomes were assessed. Methods. In this prospective randomization controlled trial, 42 patients with osteoarthritis received a Genesis II PS (Smith & Nephew, Memphis, Tennessee), with either PSI (Visionaire, Smith & Nephew) or CI (Smith & Nephew). Patients visited the hospital preoperative and postoperative after 6 weeks, 3 and 12 months. One-year postoperative varus-valgus laxity was measured in extension and flexion on stress radiographs. Additional assessments included: the hip-knee-ankle angle on long-leg radiographs, femoral and tibia component rotation on CT-scans, radiolucency, the Knee Society Score (KSS), VAS pain, VAS Satisfaction, Knee injury and Osteoarthritis Outcome score (KOOS), Patella score (Kujala), the University of California Los Angeles activity score (UCLA), the anterior-posterior laxity in 20° and 90° knee flexion, adverse events and complications. The outcome measures were compared using independent t-tests, non-parametric alternatives and repeated measurements, with a significance level of p<0.05. Results. In four cases intra-operative modifications were needed, since the PSI did not fit correctly on the tibia and/or femur. No significant differences were found between the two groups for varus-valgus laxity in both extension and flexion (figure 1), as well as for the other radiological outcomes. Both groups improved significantly on clinical and functional outcomes over time. No significant differences were found between the groups one year postoperatively. Finally, the PSI group received a thinner insert than the CI group (p=0.04). Conclusion. In conclusion, PSI in TKA does not result in better varus-valgus laxity, and clinical and functional outcomes compared with CI, one year postoperative. Since the PSI group received a thinner insert, the pre-operative surgery plan developed for he PSI probably provides more conservative bone cuts compared with CI. The thinner insert might be beneficial in the long-term; however, further research is needed to gain more insight in the long-term results of PSI

Background. One of advantages of single-radius femoral design was to offer better ligament stability based on a maintained isometry of extensor muslce during the whole range of motion. The purpose of this study was to compare intraoperative varus-valgus laxities from 0° to 90° of flexion in patients that received TKA using either a single-radius femoral design or multiradius femoral design. Methods. 56 TKAs with a single-radius femoral design (SR group) and 59 TKAs with multiradius femoral design (MR group) were included in this study. We measured and compared varus-valgus laxities at 0°, 30°, 60°, 90° of flexion using the navigation system and manual force between the 2 groups. Results. The mean total varus-valgus laxities in both groups were significantly less at 0° of flexion(3.2 ± 1.5° in SR group and 3.5 ± 1.8° in MR group) than other selected flexion anlge (p=0.011); but the difference was not significant between 2 groups (p=0.062). At 30°, 60° of flexion, the mean total varus-valgus laxities in SR group (6.2 ± 3.5° at 30° of flexion and 6.8 ± 1.5° at 60° of flexion) were significant less than those in MR group (9.2 ± 4.3° at 30° of flexion and 8.3 ± 3.8° at 60° of flexion) (p=0.027 and p=0.042, respectively). Conclusions. The single radius femoral designs showed significantly less intra-operative mid-flexion laxities compared with the multiradius femoral designs

The family we record draws attention to an association between recurrent dislocation of the patella and joint laxity, which is not confined to the knee. This may pass unrecognised if specific inquiry is not made. In this and other families reported, the joint laxity is inherited, as though due to a dominant gene, but some only of those affected suffer recurrent dislocation of the patella. It is probable that there are other genetically determined causes of recurrent patellar dislocation. In three other families we have seen more than one subject of patellar dislocation, but none had lax ligaments, and two other families have been recorded with no mention of associated joint laxity

Introduction: Medial laxity is an important problem in knees with mono-compartmental gonarthrosis. Medial laxity can cause the progression of the gonarthrosis if it is left uncorrected. Therefore, managing of medial laxity during high tibial osteotomy is very important. In this study, the effect of openning focal-dome type osteotomy on the medial laxity was investigated. Materials-Methods: Four knees of two cadavers (74-year-old male and 52-year-old female) were used in this study. For the creating pseudo-medial laxity in the knee, while total medial menisectomy was performed in two knees of male cadaver, 5 mm osteochondral resection of both joint surfaces of the medial femoral condyle and medial tibial plateau was performed in two knees of female cadaver. Results: After creation of the pseudo-medial laxity, opening focal-dome type osteotomy extending to proximal to the insertion of superficial medial collateral ligament was applied with circular fixator in all knees and 15° valgus effect was applied on the osteotomy line by motor unit of the circular fixator. By applying 15° valgus effect on the osteotomy, average reduction of medial laxity was measured as 70% in all knees. Conclusions: Opening focal-dome type osteotomy decreases medial laxity effectively by tightening the superficial medial collateral ligament

Instability is a major cause for revision surgery in total knee replacement (TKR). With a balanced gap technique, the ligaments are theoretically balanced. However, there is concern that ligament releases needed to align the leg may cause instability. Furthermore, no information is available about the relationship between the amount of varus-valgus laxity directly after implantation and at a later postoperative interval. This prospective clinical study investigated whether ligament releases necessary during total knee replacement (TKR) led to a higher varus-valgus laxity during peroperative examination and after 6 months. In this prospective cohort study, in 49 patients a primary TKR was implanted using a balanced gap technique. Varus and valgus laxity of the knee was assessed in extension and flexion (70 degrees) per-operative (before and after implant) with a navigation system and post-operative with standardised stress radiographs (both methods 15 Nm stress applied). Knees were catalogued according to ligament releases performed during surgery: no releases, lateral releases, medial releases with posteromedial condyle (PMC), and medial releases with superficial medial collateral ligament (SMCL). ANOVA was used to test between release groups. At surgery, before and after implantation of the prosthesis, there was no difference in varus or valgus laxity in extension and flexion between knees that did not need a ligament release (n=22), knees with lateral release (n=5), knees with medial SMCL releases (n=15) and knees with medial PMC releases (n=7). Six months after TKR, varus or valgus laxity in extension and flexion was not significantly different between the release categories. In conclusion, ligament releases of the SMCL, PMC, and lateral structures performed during a balanced gap technique in TKR do not lead to an increased varus-valgus laxity in extension and flexion at 6 months after surgery. Therefore, routine releases of these structures to achieve neutral leg alignment can safely be performed without causing increased varus-valgus laxity. The results of this study suggest that the reported high incidence of revisions for ligament instability after TKR is not likely to be caused by routine ligament releases when a balanced gap technique is used. Apparently, there is not a ligament instability problem as long as the gaps are properly filled with prosthesis components. We believe that the conclusion of this study would also be valid when bone referenced techniques are applied instead of tensors, as long as the gaps created are balanced

Soft tissue balancing during Total Knee Arthroplasty (TKA) is a step every surgeon takes during surgery. Coronal and transverse plane mechanical alignment is another parameter that surgeons address during surgery in an attempt to decrease wear and increase longevity. To date, a correlation between laxity, component wear patterns, and alignment of the tibial and femoral implant components has not been established. Theoretically, suboptimal alignment and poor soft tissue balancing should increase polyethylene wear and decrease implant survivorship, contributing to implant loosening and costly revision surgeries. This study utilizes a retrieval program of functioning TKAs obtained at the time of necropsy. By utilizing CT scans, mechanical laxity testing, and polyethylene damage scores, we aimed to determine if any correlation between proper alignment and ligament balancing to polyethylene damage scores exists. Methods:. Computed Tomography (CT) scans were performed on 17 cadaveric knees containing TKAs obtained from the Medical Education and Research Institute (Memphis TN) using a GE Brightspeed scanning system with a 1.25 mm slice thickness. Transverse slices from these scans were used to calculate the femoral and tibial component rotation for each specimen. Component rotation was determined by utilizing previously published methods (Berger et al), and component mismatch was defined as the difference in rotation angles of the femoral and tibial components. After removal of skin, subcutaneous and muscle tissue, the tibia and femur of each leg was cut transversely, and the specimens were mounted in a custom knee testing machine (Little Rock, AR). Specimens were subjected to a 10 Nm varus and valgus torque and a 1.5 Nm internal and external rotation torque. Data was continuously recorded, and the angle or displacement at each torque or force was noted. Each test was performed at full extension and 30, 60, and 90 degrees of flexion. TKA components were then removed from the cadaveric knees, cleaned of PMMA, and visually inspected for wear using a grading system with 10 wear areas on the articulating surface of the polyethylene tibial insert (Hood et al). Scores were assigned based on severity of 7 different degradation characteristics, and were separated based on medial or lateral compartment. The maximum possible total score was 210 for each knee. Results:. The average length of TKA implantation was 10 years. The coronal angle at +10 Nm (varus) moment ranged from 5 to 12 degrees, while the angle under a −10 Nm (valgus) moment ranged from 7 to 11 degrees across 10 specimens. The average component rotational mismatch was 20.5 degrees. The average overall medial wear score was 8.8, while the lateral average was 9.6. Wear scores showed a higher correlation to laxity in the medial compartment than the lateral side (Figures 1 and 2). Discussion:. TKA polyethylene wear shows a relationship to ligament laxity in these specimens. Component mismatch shows a negative correlation to wear scores. If surgeons are able to test for these parameters sooner, it may be possible to prevent unnecessary TKA wear and thus many revision surgeries

Aims: To test the hypothesis that there is a trend to over correction in talipes patients who demonstrate signs of generalised joint laxity. Patients and Methods: 45 patients with an average age of 6.9yrs(3–16) were examined for generalised joint laxity using the Biro score. This gave 65 feet (20 bilateral) for clinical assessment using the podoscope and graded based on Tachdijans flat foot score. Results: The results were assessed and the patients divided into 2 groups depending on whether or not they had joint laxity. This left 19 patients with 26 feet in the non-lax group and 26 patients with 39 feet in the lax group. The 2 groups were then compared to see if there was a difference in flat foot grade. In the non-lax group 2 patients showed evidence of over-correction whereas in the lax group 18 patients(25 feet)were over corrected to some extent. Using the fisher’s exact test there was a significant difference between the 2 groups with a trend towards over correction in those with generalised joint laxity (p=. 002). Conclusion: Based on the findings of this study there is a correlation between generalised joint laxity and over correction in congenital talipes equinovarus

Introduction:. Repair of the arthrotomy is a performed at the end of every total knee arthroplasty (TKA). After the arthrotomy is performed, most surgeons attempt to close the arthrotomy with the medial and lateral edges anatomically approximated. If no landmarks are made prior to performing the arthrotomy however, there is a risk that anatomic approximation may not be obtained. This study looked into the biomechanical changes in stiffness of the knee before and after a medial parapatellar approach repaired with an anatomic, and shifted capsular repair with the medial side of the arthrotomy shifted up or down when repaired to determine if capsular closure may have an effect on the stiffness of the joint. Methods:. Fourteen cadaveric TKA specimens were retrieved through the Medical Education and Research Institute (Memphis TN). For each specimen tested, the skin and muscle tissue was removed, and the femur and tibia were cut transversely 180 mm from the joint center. Specimens were fixed in extension in a custom knee testing platform (Little Rock AR) and subjected to a 10 Nm varus and valgus torque and a 1.5 Nm internal and external rotational torque. The angle at which these moments occurred was recorded, and each test was repeated for 0, 30, 60, and 90 degrees of flexion. After tests were performed on retrieved TKA specimens, a fellowship trained orthopedic surgeon vented the knee capsule by making an incision with a number 10 scalpel blade in a horizontal nature to provide a landmark for anatomic reapproximation. Tests were repeated as before, after which the surgeon performed a standard arthrotomy and repaired it using #0 suture and a neutral alignment. Sutures were cut and the repair was repeated using upward 5 mm shift and downward 5 mm shift of the medial side of the arthrotomy during the repair. All tests were repeated after each repair technique. Any increase or decrease in laxity after capsule repair was referenced to the TKA laxity tested prior to an arthrotomy being performed. Results:. Simply venting the capsule did increase laxity of the TKA in midflexion to varus torque by 3 degrees under the same torque. Otherwise, when the medial limb of the arthrotomy was shifted up during closure by 5 mm, the knee joint tended to be stiffer in flexion compared to the neutral repair measurements under varus torque, while it was closer to the measurements of the neutral or anatomic closure when the medial limb was shifted down during closure. These changes seemed to be seen in flexion more than full extension. Discussion and Conclusion:. Small changes were measured in the stiffness of the joint after venting the capsule and under different degrees of non-anatomic closure. The results stress the fact that the capsule can be measurably tightened during arthrotomy repair and may impact post-operative rehabilitation or range of motion

Instability is reported to account for around 20% of early TKR revisions. The concept of restoring the “Envelope of Laxity” (EoL) mandates a balanced knee through a continuous arc of functional movement. We therefore hypothesised that a single radius (SR) design should confer this stability since it has been proposed that the SR promotes normal medial collateral ligament (MCL) function with isometric stability throughout the full arc of motion. Our aim was to characterise the EoL and stability offered by a SR cruciate retaining (CR)-TKR, which maintains a SR from 10–110° flexion. This was compared with that of the native knee throughout the arc of flexion in terms of anterior, varus/valgus and internal/ external laxity to assess whether a SR CR-TKR design can mimic normal knee joint kinematics and stability. Eight fresh frozen cadaveric lower limbs were physiologically loaded on a custom jig. The operating surgeon performed anterior drawer, varus/ valgus and internal/external rotation tests to determine ‘maximum’ displacements in 1) native knee and 2) single radius CR-TKR (Stryker Triathlon) at 0°, 30°, 60°, 90° and 110° flexion. Displacements were recorded using computer navigation. Significance was determined by linear modelling (p≤0.05). The key finding of this work was that the EoL offered by the SR CR-TKR was largely equivalent to that of the native knee from 0–110°. The EoL increased significantly with flexion angle for both native and replaced knees. Overall, after TKR anterior laxity was comparable with the native knee, whilst total varus-valgus and internal-external rotational laxities reduced by only 1°. However, separated varus and valgus laxities at 110° significantly increased after TKR as did anterior laxity at 30° flexion. In conclusion, the overall EoL offered by the SR CR-TKR is comparable to that of the native knee. In the absence of soft tissue deficiency, the implant appears to offer reliable and reproducible stability throughout the functional range of movement, with exception of anterior laxity at 30° and varus and valgus laxity when the knee approaches high flexion. These shortcomings should offer scope for future work

Purpose: Independent cuts are generally used for tri-compartment knee prostheses but interdependent cuts may be needed. This can modify the height of the articular space or induce alignment errors. The purpose of this study was to examine the position of the implants, and the effects on laxity and lower limb alignment after implantation of a tricompartment knee prosthesis with a ligament tensor. Material and methods: Between January 1998 and October 2000, 109 total knee prostheses (posterior stabilised Legacy®) were implanted in 94 patients. Three patients died, 3 who lived far from the centre were questioned by phone, 88 patients (103 prostheses) were retained for analysis at mean follow-up of 22.5 months. None of the patients were lost to follow-up. All of the prostheses in this series were implanted with a V-STAT® ligament tensor used to guide medial and lateral capsuloligamentary balance in flexion and extension under constant tension. Results: At review, the IKS radiological scores were mean alpha 95.9° (90–108°) with 76.7% of the implants between 93° and 99°. The mean gamma angle was 1° (−8° to +8°) with 73.8% of the implants between −3° and +3°. The mean beta angle was 89.8° (86–98°) with 81.5% of the implants between 87° and 93°. Mean tibial slope measured from the mechanical tibial axis was 8.4° (2–15.5°) with 67% of the implants between 4° and 10° (desired slope 7°). The mean HKA at last follow-up was 178.8° (172.5–191°) with 75.7% of the knees between 175° and 185°. Correction was more significant for more pronounced preoperative deviation. The height of the articular space was significantly increased compared with the preoperative value. Mean radiological laxity in varus at last follow-up was 3.1° for a preoperative value of 2.8°. Mean radiological laxity in valgus at last follow-up was 3.2° for a preoperative value of 4°, a significant decrease. Mean sum of the radiological frontal laxities at last follow-up was 6.4° for a preoperative value of 6.8°, a non-significant decrease. Mean radiological sagittal laxity at last follow-up was 4.2 mm. There was no significant difference between preoperative and last follow-up sagittal laxity. Discussion: The mean values obtained in this series are in agreement with data reported in the literature. While the height of the articular space was significantly greater at last follow-up, it was not correlated with a decrease in the height of the patella at last follow-up. Decreased patellar height at last follow-up was correlated with increased patellar joint surface (AP distance of the Blackburne and Peel index) and with shortened patellar tendons. Use of the V-STAT® ligament tensor allowed homogeneous mediolateral distribution of the frontal laxity while controlling sagittal laxity and preserving a normal axis of the lower limb

Background. In a mobile-bearing unicondylar knee arthroplasty (UKA) stability is very important for the knee function and to prevent dislocation of the insert. A tension-guided technique to determine the position of the optimal posterior bone cut should theoretically lead to a better varus-valgus stability. The goal of this study was to measure the difference in valgus laxity in flexion and extension between a tension-guided and spacer-guided system for mobile-bearing UKA. Also clinical function was evaluated between the groups. Patients and Methods. A tension-guided UKA system (BalanSys. TM. , Mathys, Bettlach, Switzerland) was compared with a retrospective group of a spacer-guided system (Oxford, Biomet Ltd, Bridgend, UK). A total of 30 tension-guided UKAs were placed and compared to 35 spacer-guided prostheses. Valgus laxity was measured at least 6 months postoperatively in both groups using stress radiographs. The flexion stress radiographs were made fluoroscopically aided in 70 degrees of knee flexion. Laxity measurements in extension were performed on stress radiographs obtained with the Telos device. Knee Society Scores (KSS) were obtained at follow-up. Results. Valgus laxity in flexion was significantly higher in the tension-guided group compared to the spacer-guided group: 3.9° and 2.4°, respectively, p<0.001) In extension, valgus laxity was 1.8° in the tension-guided group compared to 2.7° in the spacer-guided group, which was significantly different (p<0.001). There was no significant difference between the two groups in the KSS at 6 months follow-up. (p=0.31). Discussion and conclusion. The tensor-guided system resulted in significantly more valgus laxity in flexion compared to the spacer-guided system. However, in extension the situation was reversed: the tension-guided system resulted in less valgus laxity than the spacer-guided system. Clinically, there were no differences between the groups. The valgus laxity found with the spacer-guided system better approximates the valgus laxity values of healthy elderly

It is impossible to determine the effect of a single parameter in clinical or in-vitro knee research. There are also parameters which can not or hardly be determined. These disadvantages can be overcome with a model. The objective of this study was to create a dynamic FE model of a human knee joint after TKA which is applicable to a variety of research question. The knee model consisted of a femur, tibia and patella, collateral ligaments and a PCL, combined with a CKS cruciate retaining total knee prosthesis. The patella was not resurfaced. An axialload of 150 N and a quadriceps-force of 81N was applied. The model was validated by the model prediction of joint laxities at different flexion-angles and the calculation of the knee kinematics during flexion-extension. The predicted varus-valgus laxity at different flexion angles was in between 0 and 6.3 degrees. Laxity values decreased towards extension and towards 90 degrees of flexion. The AP test at 20, 30 and 90 degrees of flexion showed a anterior laxity of 3.1, 4.3 and 2 mm, respectively. The posterior laxity was 5.7 mm, but could only be determined at 90 degrees. The model predicted reasonable kinematics, which were identical for two consecutive flexion-extension movements. The model predictions were well in agreement with reported values, which were measured experimentally. Differences could be well explained by ligament structures which were (still) omitted with in the model. This dynamic model, in which ligaments were actually modelled as bands, combined all major structures within the knee joint. It was well able to predict laxities and kinematics and turned out to be very stable, mathematically. With this model we will be able to address effects of prosthetic and surgical parameters on the stability and kinematics of the knee joint

Aims: To test the hypothesis that there is a trend to over correction in patients who demonstrate signs of generalised joint laxity. Patients and methods: 41 patients with an average age of 6.5yrs (3–15) were examined for generalised joint laxity using the Biro score. This gave 52 feet (11 bilateral) for clinical assessment using the podoscope and graded based on Tachdijans flat foot score. Results: The results were assessed and the patients divided into 2 groups depending on whether or not they had joint laxity. This left 15 patients with 18 feet in the non-lax group and 26 patients with 34 feet in the lax group. The 2 groups were then compared to see if there was a difference in flat foot grade. In the non-lax group 2 patients showed evidence of over-correction whereas in the lax group 25 patients were over corrected to some extent. Using the fisher’s exact test there was a significant difference between the 2 groups with a trend towards over correction in those with generalised joint laxity (p = 0.002). Conclusion: Based on the findings of this study there is a correlation between generalised joint laxity and over correction in congenital talipes equino-varus

Purpose of the study: It is currently accepted that ligament balance should be one of the goals for total knee arthroplasty (TKA) and that this balance should be obtained by correct bone cuts or appropriate ligament procedures. There is however no standard way of assessing this balance. The purpose of this study was to define limit values for knee laxity observed in a series of normal knees and in a series of 54 TKA reviewed at more than ten years. Material and methods: Laxity in extension of normal knees was measured on forced varus and valgus films using the contralateral knees of patients who had undergone knee surgery for osteotomy or prosthesis implantation. Laxity in extension of TKA knees was measured the first postoperative year and at last follow-up by measuring the decoaptation between the tibial and femoral pieces on single-leg stance films. The change in decoaptation over time was compared with the postoperative and last follow-up goniometry figures, the IKS knee score, the number of loosenings and the number of lucent lines. Multifactorial analysis was considered significant at p< 0.05. Results: For the normal knees in extension, the medial compartment gap was 2 mm on average (range 1.5–3.5 mm) on the forced valgus images and the lateral compartment gap was 3 mm on average (range 2–4 mm) on the forced varus images. The corresponding angular value was 1° decoaptation on the forced valgus images and 1.5° on the forced varus images. Among the 54 knees with a TKA, the first postperative single-leg stance image revealed a lateral decoaptation _ 3° for 12 knees considered to present laxity, and was _ 2° for 42 knees considered not to present laxity. At last follow-up (13 years on average, range 11–14 years) the 42 knees without laxity remained unchanged without decoaptation, including the 34 normocorrected knees (±3°) and the eight undercorrected knees presenting more than 3° varus (mean undercorection 5°, range 3–7°). The 12 knees presenting postoperative radiographic decoaptation _ 3° showed at last follow-up a significant increase in laxity (p< 0.05) and 2.5° further increase in decoaptation. The increase in decoaptation occurred on normocorrected (n=7) or undercorrected (n=5) knees. This increase in decoaptation was greater with greater residual genu varum. Four groups of knees could be distinguished: normocorrected and stable; normocorrected and unstable; undercorrected and stable; overcorrected and unstable. The number of loosenings requiring revision and the number of progressive lucent lines were significantly greater among unstable knees (two loosenings, and five progressive lucent lines) than among stable knees (no loosening or lucent lines). They were also greater in the group of normocorrected and unstable knees (one loosening and two lucent lines) than in the group of undercorrected and stable knees (no loosening or lucent line). The IKS knee score of stable knees was higher than that of unstable knees irrespective of the correction (p< 0.05). Discussion: Postoperative laxity in varus with angular decoaptation greater than 3° corresponds to a lateral compartment gap and should be avoided even if the knee is properly aligned postoperatively. If the knee is stable, moderate undercorrection (3–5° varus) does not appear to have an unfavorable long-term effect on knee laxity or on the femoral and tibial pieces. Conclusion: For knees with constitutional genu varum, moderate undercorrection with a stable knee is preferable to normocorrection at the cost of lost stability

We studied the stabilising effect of prosthetic replacement of the radial head and repair of the medial collateral ligament (MCL) after excision of the radial head and section of the MCL in five cadaver elbows. Division of the MCL increased valgus angulation (mean 3.9 ± 1.5°) and internal rotatory laxity (mean 5.3 ± 2.0°). Subsequent excision of the radial head allowed additional valgus (mean 11.1 ± 7.3°) and internal rotatory laxity (mean 5.7 ± 3.9°). Isolated replacement of the radial head reduced valgus laxity to the level before excision of the head, while internal rotatory laxity was still greater (2.8 ± 2.1°). Isolated repair of the MCL corrected internal rotatory laxity, but a slight increase in valgus laxity remained (mean 0.7 ± 0.6°). Combined replacement of the head and repair of the MCL restored stability completely. We conclude that the radial head is a constraint secondary to the MCL for both valgus displacement and internal rotation. Isolated repair of the ligament is superior to isolated prosthetic replacement and may be sufficient to restore valgus and internal rotatory stability after excision of the radial head in MCL-deficient elbows

Purpose of the study A prospective observational study to ascertain any correlation between joint laxity and knee hyperextension to anterior cruciate ligament rupture. Methods used Joint laxity as defined by Beighton’s method and hyperextension of uninjured knee in 169 patients with symptomatic isolated anterior cruciate ligament rupture was recorded in a prospective fashion. This was correlated to the scores obtained in a selected group of age and sex matched controls. Results 72 out of 169 of the patients had hyperlaxity in their joints and 133 out of 169 had knee hyperextension. In the control group 14 out of 65 had hyperlaxity in their joints and 24 out of 65 had knee hyperextension. Statistical analysis showed that ACL injury was common in those with lax joints and with knee hyperextension with a p < 0.001. Conclusion ACL injury is common in patients with joint laxity especially in those with knee hyperextension

Introduction: Anterior Cruciate Ligament (ACL) is primary constrain to anterior displacement of tibia with respect to the femur and secondary to internal/external (IE) and varus/valgus (VV) rotations; an ACL reconstruction should thus control not only AP but also IE and VV laxities. For this reasons, more attention has given to residual rotational instability. This study aims to verify if those subjects with high of pre-op knee laxities has also high post-op laxity after an ACL reconstruction. Material and Methods: The study includes 115 patients, that underwent ACL reconstructions between January 2005 and September 2007. Patients with associated severe ligaments tears or severe chondral defects were excluded. The joint passive kinematics was intra-operatively assessed using the BLU-IGS system (Orthokey, Delaware). We evaluated, before and after the reconstruction, the manual maximum IE rotation at 30° and 90° of flexion, VV rotation at 0° and 30° of flexion and AP displacement at 30° and 90° of flexion. We used the k-means algorithm applied to pre-op values to create two groups among the patients: the GROUP H, with higher pre-op laxity and the GROUP L, with lower pre-op laxity. The pre-op groups were compared for each test using independent Student’s t-test (p=0.01) in order to assess their difference. Student’s t-test (p=0.01) was performed on the corresponding post-op values in order to verify if the difference between H and L was maintained after the reconstruction. Results: Mean pre-op VV at 0° was 7.1±0.9° for group H and 4.7±0.8° for group L (p< 0.01), post-op was 3.2±0.8° for group H and 2.5±0.8° for group L (p< 0.01). Mean pre-op VV at 30° was 6.2±1.5° for group H and 3.4±0.7° for group L (p< 0.01), post-op was 3.4±1.3° for group H and 2.2± 0.9° for group L (p< 0.01). Mean pre-op IE at 30° was 28.3±3.5° for group H and 19.2±3.1° for group L (p< 0.01), post-op was 21.5±3.8° for group H and 14.7±3.7° for group L (p< 0.01). Mean pre-op IE at 90° was 31.3±2.8° for group H and 22.4±3.5° for group L (p< 0.01), post-op was 22.3±4.0° for group H and 17.0±4.4° for group L (p< 0.01). Mean pre-op AP at 30° was 14.5±2.1mm for group H and 8.9±1.6mm for group L (p< 0.01), post-op was 6.2±1.6mm for group H and 4.2±1.6mm for group L (p< 0.01). Mean pre-op AP at 90° was 11.2±1.7mm for group H and 6.7±1.4mm for group L (p< 0.01), post-op was 5.4±1.8mm for group H and 3.4±1.3mm for group L (p< 0.01). Discussion: The comparison between group H and group L showed that those patients with higher pre-op laxity had maintained higher post-op values mainly for all the tests. This finding is probably correlated to the possible presence of different tears affecting soft structures of the joint and to the proper and specific anatomy of each patient

NavioPFS™ unicondylar knee replacement (UKR) system combines CT-free planning and navigation with robotically assisted bone preparation. In the planning procedure, all relevant anatomic information is collected under navigation, either directly with the point probe or by kinematic manipulation. In addition to key anatomic landmarks and the maps of the articulating surfaces of the femur and tibia, kinematic assessment of the joint laxity is performed. Relative positions of femur and tibia are collected through the flexion/extension range, with the pressure applied to fully stretch the collateral ligament on the operative side. The planning procedure involves three stages: (1) the implant sizing and initial placement,(2) balancing of the gap on the operative side and (3) evaluating the contact points for the recorded flexion data and the planned placement of implants. In the gap balancing stage, the implants are repositioned until they allow for a positive gap, preferably uniform, throughout the entire range of flexion. UKR was planned and prepared on six cadaver knees with the help of NavioPFS system. All knees were normal without any signs of osteoarthritis. Two surgeons have performed medial UKR (4+2), and the bones were prepared using the NavioPFS handheld robotic tool. Postoperatively, we have re-used the data collected during the planning procedure to compare the kinematic (gap balancing) performance of the used implant with three different commercial implant designs. All implants were placed in the orientation recommended by the respective manufacturer, sized to best fit the original bone geometry, and repositioned optimally balance the gap curve through the entire flexion range, without any negative gaps (overlaps). Since these were nonarthritic cadaver knees, the intent was to restore the original preoperative varus/valgus in neutral (zero) flexion. The three implant designs demonstrated variable degree of capability to uniformly balance the knee gap over the entire range of flexion. The first implant (A) required a gap larger than 2 mm in one case out of six, the second (B) was capable of producing the positive gap curve under 2mm of gap in all six cases, and the third (C) required a gap larger than 2 mm in 3 (50%) of cases. All three designs exhibit the reduced gap space in mid (30°–90°) flexion. Despite the best attempts, the artificial implants do not fully replicate the healthy knee kinematics. This is manifested by increased tightness in the mid flexion. In order to balance the gap in mid flexion, additional laxity has to be allowed in full flexion, extension, or both. NavioPFS allows for patient specific planning that takes into account this information, only available intraoperatively. This kind of evaluation on a patient specific basis is a very important planning tool and it allows the insight on the implant performance in mid flexion, typically not available using conventional planning techniques. It can also help in improving kinematic performance of future implant designs

Orthopaedic surgeons are currently faced with an overwhelming number of choices surrounding total knee arthroplasty (TKA), not only with the latest technologies and prostheses, but also fundamental decisions on alignment philosophies. From ‘mechanical’ to ‘adjusted mechanical’ to ‘restricted kinematic’ to ‘unrestricted kinematic’ — and how constitutional alignment relates to these — there is potential for ambiguity when thinking about and discussing such concepts. This annotation summarizes the various alignment strategies currently employed in TKA. It provides a clear framework and consistent language that will assist surgeons to compare confidently and contrast the concepts, while also discussing the latest opinions about alignment in TKA. Finally, it provides suggestions for applying consistent nomenclature to future research, especially as we explore the implications of 3D alignment patterns on patient outcomes.

Cite this article: Bone Joint J 2023;105-B(2):102–108.

Aim: To introduce a new concept of Envelope of Laxity (EoL) in knee arthroplasty surgery for balancing a total knee replacement (TKR). Methods: Twenty consecutive patients with varus knees undergoing TKR were included in the study. All operations were performed by the senior author using the Stryker Navigation system and the Scorpio cruciate retaining (CR) TKR. After registration with the navigation system initial dynamic varus/valgus curves were recorded from 0–120° flexion to give an EoL of the native knee. Repeated measurements were taken after trial components were initially inserted, then after any soft tissue releases and finally after insertion of actual tibial and femoral components. All measurements were taken with the patellar in situ. Results: The average deformity in the varus group initially was 6.9° varus at 0°, 8.9° varus at 30°, 6.9° varus at 60° and 5° varus at 90° of knee flexion. Postoperatively values were found to be 0.1°, 0°,0.3°and 0.7°respectively. The initial EoL curves showed a mean increase in laxity of 4° between 30° and 60°compared to 0°–30° and 60°–90° through the range of knee flexion. This was seen less in the outcome curves which tended to show more uniform laxity with only an average of 2° difference throughout flexion. Conclusions: Traditional balancing devices used in TKR surgery balance knees at 0° and 90°, often with the patellar everted which produces errors. The use of EoL curves allows knees to be balanced throughout the arc of movement from 0–150° with the patellar in situ. This study demonstrates the successful use of the EoL concept and that even when knees are balanced at 0° and 90° they may not be balanced at the mid flexion position where clinical problems often arise. This problem becomes worse with the use of poly radii TKR designs

Objective. Shoulder instability is a common cause of morbidity amongst Professional Rugby Union players. This study explores whether the risk of shoulder dislocation is associated with innate shoulder laxity. Methods. A randomised controlled study was completed in which all the Premiership Rugby Clubs in England were visited in 2006. 169 professional rugby players (mean age 25.1 years) with no history of instability in either shoulder were assessed and 46 injured players with one shoulder with a history of Bankart lesion or dislocation (mean age 27.5 years) also took part in this study. Shoulder laxity was measured by dynamic ultrasound. Anterior, posterior and inferior translations were measured in both shoulders for healthy players and the uninjured shoulder only for injured players. Results. No significant difference between the non-dominant (anterior: mean 2.9±1.2mm; posterior: mean 5.1±1.8mm; inferior: mean 3.1±1.0mm) and dominant (anterior: mean 3.1±1.1mm; posterior: mean 4.9±1.6 mm; inferior: mean 2.9±1.0mm) shoulders in healthy players (P>0.05). The comparison between healthy shoulders (anterior: mean 3.0±1.2mm; posterior: mean 5.0±1.7mm; inferior: mean 3.0±1.0mm) from healthy players and the uninjured shoulder (anterior: mean 4.2±1.7mm; posterior: mean 6.2±3.0mm; inferior: mean 3.4±1.2mm) from injured players identified that players with unstable shoulders have a significantly higher shoulder translation in their normal shoulder than healthy players (P<0.05). Conclusion. This is the first study looking at laxity and the risk of shoulder dislocations in sportsmen involved in a high contact sport. These results support the hypothesis that rugby players with ‘lax’ shoulders are more likely to sustain a dislocation or subluxation injury to one of these lax shoulders in their sport even if no symptom is presented

The patterns of laxity of normal wrists subjected to dorsal and volar stresses were analysed. Dorsal and volar displacement tests were carried out on both wrists of 50 subjects under image-intensifier control. Lateral projections in neutral, and dorsal and volar stress positions were taken to analyse the behaviour of the carpal bones. Varying degrees of capitolunate subluxation under dorsal and volar stress were noted. Dorsal displacement of the capitate appeared to be more prominent than volar displacement. The lunate either extended or subluxed dorsally in response to a dorsal stress, suggesting a different pattern of laxity for the radiolunate joint. These observations provide a baseline for the interpretation of dorsal and volar stress views in the symptomatic wrist

The purpose of this study was to compare intraoperative varus-valgus laxities in total knee arthroplasty [TKA] using either a single-radius femoral design or multi-radius femoral design. 56 TKAs were performed by using a single radius femoral design (Scorpio NRG, SR group) and 59 TKAs were performed by using a multi-radius femoral design (Zimmer NexGen, MR group), both with a minimum of 1-year follow-up. We compared intra-operative varus-valgus laxities at 0°, 30°, 60°, 90° of flexion using the navigation system (Orthopilot, Aesculap, Tuttlingen, Germany). A series of clinical outcomes were evaluated at the time of the latest follow-up including HSS, WOMAC, VAS score during stair climbing. At 30°, 60° of flexion, the mean total varus-valgus laxities in SR group (6.2 ± 3.5° at 30° of flexion and 6.8 ± 1.5° at 60° of flexion) were significant less than those in MR group (9.2 ± 4.3° at 30° of flexion and 8.3 ± 3.8° at 60° of flexion) (p=0.027 and p=0.042, respectively). In the clinical results, there was not significant difference. The single-radius femoral designs for TKA showed evidently less intra-operative mid-flexion stability compared with the multi-radius femoral design. However clinical outcomes revealed no other significant dissimilarity on HSS, WOMAC and VAS scores during stair climbing

We measured the range of rotation in both hips of 397 normal children and in the unaffected hip of 135 children with unilateral congenital dislocation of the hip. Both groups were assessed for generalised joint laxity. Joint laxity was more common in normal children with an internally centred arc of hip rotation than in normal children with a neutral or an externally rotated arc. The children with congenitally dislocated hips had significantly more joint laxity than did the control group and significantly more of them had an internally centred arc of hip rotation. We suggest that the lax joint capsule fails to mould away the neonatal anteversion of the femoral neck during the first few months of life

Shoulder instability is a common cause of morbidity amongst Professional Rugby Union players. This study explores whether the risk of shoulder dislocation is associated with innate shoulder laxity. A prospective, randomised controlled study was completed in which all the Premiership Rugby Clubs in England were visited. 169 professional rugby players with no history of instability in either shoulder and 46 players with one shoulder with clinical instability symptoms were assessed. Shoulder laxity was measured by clinical evaluation, questionnaires and ultrasound. Anterior, posterior and inferior translation was measured in both shoulders for healthy players and the uninjured shoulder only for injured players. The results showed there was no significant difference between the left (anterior: mean 2.92 +/− 1.15 mm; posterior: mean 5.10 +/− 1.75 mm; inferior: mean 3.08 +/− 1.00 mm) and right (anterior: mean 3.07 +/− 1.14 mm; posterior: mean 4.87 +/− 1.61 mm; inferior: mean 2.91 +/− 0.99 mm) shoulders in healthy players (P > 0.05). The comparison between healthy shoulders (anterior: mean 3.00 +/− 1.15 mm; posterior: mean 4.99 +/− 1.68 mm; inferior: mean 3.00 +/− 1.00 mm) from healthy players and the uninjured shoulder (anterior: mean 4.16 +/− 1.70 mm; posterior: mean 6.16 +/− 3.04 mm; inferior: mean 3.42 +/− 1.18 mm) from injured players identified that players with unstable shoulders have a significantly higher shoulder translation in their normal shoulder than healthy players (P < 0.05). This is the first study looking at laxity and the risk of shoulder dislocations in sportsmen involved in a high contact sport. These results support the hypothesis that rugby players with “lax” shoulders are more likely to sustain a dislocation or subluxation injury to one of these lax shoulders in their sport

Aims: Hindfoot deformity in varus position is an aetiology of chronic ankle instability without laxity. In this condition, a Dwyer osteotomy has to be performed. Methods: Between 1992 and 2000, 15 patients have been operated on, with this technique. The mean varus deformity was of 5û (3û to 10û).13 patients had sporting activities, 8 of them in competition. Instability during sporting activity were present in 60% of cases. Associated lesions were reported in 6 cases. A Dwyer procedure using a 1/3 tube plate þxed with two screws were performed in all cases. Associated procedures were performed at the same time as such as a lateral ligamentoplasty or a þrst metatarsal osteotomy. All patients were reviewed clinically and radiologically using AOFAS score. Results: The mean follow-up was of 3.5 years (1 to 9 years). The only one complication reported was a skin necrosis, treated by a cutaneous ßap in a patient operated on with Dwyer and ligamentoplasty in the same procedure. No ankle instability was reported. Mild pain was reported in 10 patients and 50% of them only for sporting activities.11 patients returned to sporting activity and 33% of them at the same level. The mean Kita-oka score was of 92 (85 to 100). The patients were satisþed and very satisþed in 80 of cases. Conclusions: Dwyer lateral closing wedge calcaneal osteotomy is successful for the treatment of chronic ankle instability without laxity and with varus hindfoot deformity. When laxity is associated with varus deformity an operative procedure in two steps is necessary to avoid wound complication. Dwyer osteotomy has to be performed þrst

Quantification of the anterior and rotational laxity of the knee allows recognising an anterior cruciate ligament (ACL) insufficiency and assessing the severity of the lesion. The new GNRB system has demonstrated an improved accuracy and precision in the assessment of the anterior laxity. However, it is not known if this pre-operative measurement is a good predictor of the intra-operative measurement of the knee laxity, especially in the rotational plane. We tested the following hypotheses: 1) the pre-operative anterior knee laxity measured with the GNRB system is predictive for the intra-operative measurement of the anterior knee laxity by a navigation system, and 2) the pre-operative anterior knee laxity measured with the GNRB system is predictive for the intra-operative measurement of the rotational knee laxity by a navigation system,. 40 patients operated on for ACL reconstruction were included. The anterior knee translation was assessed before the operation with the GNRB system with a force of 250 N at 25° of knee flexion. The anterior knee translation and the internal-external range of rotation was measured intra-operatively before and after ACL reconstruction with the navigation system. The correlation between 1) the measurements of the anterior laxity by the GNRB system and the navigation system, and 2) the measurements of the anterior translation by the GNRB system and the rotational knee motion measured by the navigation system, were assessed. There was a significant difference between the measurements of the mean knee anterior laxity by the GNRB system (9.1 ± 2.9 mm) and by the navigation system (11.3 ± 4.0 mm) (p<0.001). There was no significant correlation between the two techniques (R. 2. = 0.01). However, a satisfactory agreement between the two techniques was observed (R. 2. = 0.03), with a systematic bias of −3.3 mm for GNRB measurements in comparison to navigated measurements. There was neither significant correlation nor satisfactory agreement between the two techniques when predicting the rotational motion of the knee. When used prior to ACL reconstruction, the GNRB system underestimates the anterior laxity of the knee that will be measured during the reconstruction by a navigation system, and does not predict the amount of rotational laxity. It is difficult to predict accurately the anterior and rotational knee laxity by pre-operative measurements

Posterolateral rotatory instability (PLRI) is the most common type of elbow instability. It is caused by an insufficiency of the lateral ligamentous complex, which consists mainly of the radial collateral ligament (RCL) and the lateral ulnar collateral ligament (LUCL). Investigate the influence of serial sectioning of the lateral ligamentous complex on elbow stability in a cadaveric model of PLRI. Kinematics of six fresh frozen cadaveric elbow specimens were measured by digitizing anatomical marks with a Microscribe 3DLX digitizing system (Revware Inc, Raleigh, NC). Each specimen was tested under four conditions: Intact, LUCL tear, LUCL and RCL tear, and complete Tear (LUCL, RCL and capsule tear). Each specimen was tested in 30°, 60° and 90° elbow flexion angles. Varus- laxity was measured in supination, pronation, and neutral forearm rotation positions and total forearm rotation was measured with 0.3 Nm of torque. Statistical significant differences between the conditions were detected using a two-way ANOVA with Tukey's post-hoc test. The radial head dislocated in all specimens in LUCL and RCL tear and Comp but not in LUCL tear. Total forearm ROM did not increase form intact to LUCL tear (p>0.05) but significantly increased in LUCL and RCL tear (p=0.0002) and complete tear (p<0.0001) in all flexion angles. Additionally, ROM in LUCL tear significantly differed from LUCL and RCL tear and complete tear (p=0.0027 and p=0.0002). A similar trend was seen with the varus angle. While there was a significant difference when the intact condition was compared to both the LUCLand RCL tear and complete tear conditions (p<0.0001 and p<0.0001), there was no difference between the intact and LUCL tear conditions. LUCL tear alone is not sufficient to cause instability and increase ROM and varus angle, meanwhile the increase of ROM and varus angle with additional capsular tear was not significant compared to LUCL and RCL tear. The increase of ROM after LUCL and RCL tear is an unknown symptom of PLRI

INTRODUCTION. This study aimed to intra-operatively quantify the improvements in knee stability given both by anatomic double-bundle (ADB) and single-bundle with additional lateral plasty (SBLP) ACL reconstruction using a navigation system. MATERIALS AND METHODS. We prospectively included 35 consecutive patients, with an isolated anterior cruciate ligament injury, that underwent both ADB and SBLP ACL reconstruction (15 ADB, 20 SBLP). The testing protocol included anterior/posterior displacement at 30° and 90° of flexion (AP30–AP90), internal/external rotation at 30° and 90° of flexion (IE 30–IE90) and varus/valgus test at 0° and 30° of flexion (VV0–VV30); pivot-shift (PS) test was used to determine dynamic laxity. The tests were manually performed before and after the ACL reconstruction and the data were acquired by means a surgical navigation system (BLU-IGS, Orthokey, USA). Comparisons of pre- and post-reconstruction laxities were made using paired Student t-test (P=0.05) within the same group; comparison between ADB and SBLP groups was indeed performed using independent Student t-test (P=0.05), analysing both starting pre-operative condition and post-operative one. RESULTS. Statistically significant reduction of the global amount of laxity and global displacement was observed for both reconstructions (p<0.05) in all the performed clinical tests. Statistical differences was found between the two reconstruction considering the recovery (pre-post laxities) due to the each reconstruction, in VV0 (SBLP: 3.7±0.2° and ADB: 2.3±0.5°, p<0.0001) and in IE90 (SBLP: 9.2±3.1° and ADB: 5.0±2.8°, p=0.0022). Statistical differences were also found between the two reconstruction considering the recovery of global displacement, in particular for the lateral compartment during AP90 SBLP: 8.8±1.0 mm, ADB: 6.4±0.4 mm, p<0.0001), for the maximal lateral joint opening during VV0 (SBLP: 4.5±1.2 mm, ADB: 1.2±1.1 mm, p<0.0001) and VV30 (SBLP 3.5±1.3 mm, ADB 1.8±0.1 mm, p=0.0013) and both for the medial and lateral AP displacement during IE90 (in in medial compartment SBLP:5.6±0.6 mm, ADB: 2.7±0.7 mm, p<0.0001, in lateral compartment SBLP:8.2±1.0 mm, ADB: 3.9±0.8 mm, p<0.0001). During PS test ADB patients revealed less “hysteresis” after reconstruction (p=0.0005). Moreover SBLP patients presented more acceleration after the reconstruction compared to ADB and more evident displacement (p=0.0009). DISCUSSION. Both the reconstructions worked similarly for what concerns knee static laxity. The considered extra-articular procedure plays an important role in better controlling lateral tibial compartment displacement in drawer test and in controlling maximal lateral joint opening both at 0° and 30° of flexion. On the other hand the ADB reconstruction better restores the dynamic behaviour of the joint under PS test

Background Female patients undergoing arthroscopic anterior cruciate ligament reconstruction with hamstring tendon graft developed increased post-operative laxity compared to male and female patients who had been reconstructed using patellar tendon graft. Hypothesis Supplementary tibial fixation in female patients will reduce laxity. Study Design Prospective, randomized, double-blinded clinical trial. Methods Fifty-six female patients divided into two groups (standard tibial fixation versus supplementary staple fixation) were followed for 2 years. Results After 2 years the mean side-to-side difference utilizing KT-1000 arthrometer manual maximum measurements was 1.8 mm (standard group) and 1.1 mm (staple group) (p=0.05). A Grade 0 Lachman test was present in 63% of the standard group and 86% of the staple group (p=0.04). Kneeling pain was experienced by 7% of the standard group and 29% of the staple group (p=0.05). Conclusions Supplementary tibial fixation in female patients undergoing ACL reconstruction with hamstring tendon graft and interference screw fixation with a single screw size significantly improves laxity measurements and clinical stability assessment 2 years postoperatively. However, this is at the cost of increased kneeling pain

Purpose: Chronic ankle instability is generally related to lateral laxity of the tibiotalar joint. Stress x-rays may however be negative. Varus of the hindfoot is another possibility. In such cases, it would be logical to propose Dwyer valgus osteotomy of the calcaneum. The objective of this work was to review patients who underwent Dwyer osteotomy from 1992 to 2000. Material and methods: The series included fifteen patients, nine men and six women, who complained of chronic ankle instability with no evidence of laxity. All presented a varus hindfoot (mean 5°, range 3–10°). Thirteen patients practiced sports, including eight at the competition level. Sixty percent had experienced instability accidents during sports activities. Associated lesions were fissures of the fibular tendons (n=2), osteochondral lesion of the talar dome (n=1), Haglund disease (n=1) and stage II pes cavus (n=2). Lateral closed Dwyer osteotomy was performed in all cases, generally with fixed with two screws in a 2-hole 1/3 plate. Associated procedures were: lateral ligamentoplasty (n=1), osteotomy to raise M1 (n=2), regularisation of an osteochondral lesion of the talar dome (n=1), Zadek osteotomy (n=1) and anterior arthrolysis (n=1). The same surgeon reviewed the patients clinically and radiologically, independent of the operator. Results: Mean follow-up was 3.5 years (range 1–9, SD 2.5). There were no complications except one case of cutaneous necrosis in the patient who had simultaneous osteotomy and ligamentoplasty. Instability resolved in all patients. Ten patients experienced minor episodic pain (50% during sports activities). Eleven patients (70%) resumed their sports activities within eight months (3–36) and 33% at their former level. The mean Kitaoka score was 92 (85–100) and 80% of the patients were satisfied or very satisfied. Conclusion: Dwyer osteotomy provides quite satisfactory results for patients with chronic ankle instability without evidence of laxity and hindfoot varus. When a complementary ligamentoplasty appears to be necessary, it is preferable to wait for a second operation in order to avoid the risk of cutaneous necrosis

1. A survey of genetic and other etiological factors has been carried out in 589 index patients with congenital dislocation of the hip and their families, with special investigation of acetabular dysplasia, familial joint laxity and a comparison of neonatal and late-diagnosis cases. 2. It is believed that there are two etiological groups with congenital dislocation of the hip, i) a group with acetabular dysplasia which is inherited as a multiple gene system and is responsible for a high proportion of cases diagnosed late, and ii) a group with joint laxity which is responsible for a high proportion of neonatal cases. 3. Evidence is presented to show that acetabular dysplasia is a separate heritable system in some families. 4. Other findings relating to the genetic aspects of the survey are summarised

As well as improved component alignment, recent publications have shown that navigation systems can assess knee kinematics and provide a quantitative measurement of soft tissue characteristics. In particular, navigation-based measures of varus and valgus stress angles have been used to define of the extent of soft-tissue release required at the time of the placement of the prosthesis. However, the extent to which such navigation-derived stress angles reflect the restraining properties of the collateral ligaments of the knee remain unknown. The aim of this cadaveric study was to investigate correlations between the structural properties of the collateral ligaments of the knee and stress angles measured with an optically-based navigation system. Nine fresh-frozen cadaveric knees (age 81 ± 11 years) were resected 10-cm proximal and distal to the knee joint and dissected to leave the menisci, cruciate ligaments, posterior joint capsule and collateral ligaments. The resected femoral and tibial were rigidly secured within a test system which replicated the lower limb and permitted kinematic registration of the knee using the standard workflow of a commercially available image free navigation system. Frontal plane knee alignment and varus-valgus stress angles in extension were acquired. The manual force required to produce varus-valgus stress angles during clinical testing was quantified with a dynamometer attached to the distal tibial segment. Following assessment of knee laxity, bone–ligament–bone specimens were prepared and mounted within a uniaxial materials testing machine. Following 10 preconditioning cycles specimens were extended to failure. Force and crosshead displacement were used to calculate principal structural properties of the ligaments including ultimate tensile strength and stiffness as well as the instantaneous stiffness at loads corresponding to those applied during varus-valgus stress testing. Differences in the structural properties of the collateral ligaments and the varus and valgus laxity of the knee were evaluated using paired t tests, while potential relationships were investigated with scatter plots and Pearson’s product moment correlations. There was no significant difference in the mean varus (4.3 ± 0.6°) and valgus laxity measured (4.3 ± 2.1°) for the nine knees or the corresponding distal force application required during stress testing (9.9 ± 2.5N and 11.1 ± 4.2N, respectively). Six of the nine knees had a larger varus stress angle compared to the valgus angle. There was no significant difference in the stiffness of the medial (63 ± 15 N/mm) and lateral (57 ± 13 N/mm) collateral ligaments during failure testing. The medial ligament, however, was approximately two fold stronger than its lateral counterpart (780 ± 214N verse 376 ± 104N, p< 0.001). While the laxity measures of the knee were independent of the ultimate tensile strength and stiffness of the collateral ligaments, there was a significant correlation between the force applied during stress testing and the instantaneous stiffness of the medial (r = 0.91, p = 0.001) and lateral (r = 0.68, p = 0.04) collateral ligaments. The findings of the current study suggest that computer-assisted measures of passive knee laxity are largely independent of the ultimate strength and stiffness of the collateral ligaments. The force applied during manual stress testing of the knee, however, was strongly correlated with the instantaneous stiffness of the collateral ligaments suggesting users may attend to the low-stress behaviour of the ligaments. Nonetheless the force applied during stress testing varied between knees, as did the resultant angular deviation. Therefore to make use of the quantified data given by navigation systems, further work to understand the relationships between applied force, resultant stress angles and clinical outcomes for knee arthroplasty is required

Introduction. Mid-flexion stability is believed to be an important factor influencing successful clinical outcomes in total knee arthroplasty. The post of a posterior-stabilizing (PS) knee engages the cam in >60° of flexion, allowing for the possibility of paradoxical mid-flexion instability in less than 60° of flexion. Highly-conforming polyethylene insert designs were introduced as an alternative to PS knees. The cruciate-substituting (CS) knee was designed to provide anteroposterior stability throughout the full range of motion. Methods. As part of a prospective, randomized, five-year clinical trial, we performed quantitative stress x-rays on a total of 65 subjects in two groups (CS and PS) who were more than five years postoperative with a well-functioning total knee. Antero-posterior stability of the knee was evaluated using stress radiographs in the lateral position. A 15 kg force was applied anteriorly and posteriorly with the knee in 45° and 90° of flexion. Measurements of anterior and posterior displacement were made by tracing lines along the posterior margin of the tibial component and the posterior edge of the femoral component, which were parallel to the posterior tibial cortex. (Figures 1–4). Results. In both 45° and 90° of flexion, the PS group demonstrated significantly less total anterior/posterior displacement compared to the CS group, (45°: 7.33 mm vs 12.44 mm, p ≤ 0.0001, 90°: 3.54 mm vs. 9.74 mm, p ≤ 0.0001). (Figures 5,6) The only statistically significant outcomes score difference was seen with the KSS function score in the female subset, with the CS score lower (81.8) compared to the PS score (94.7). (Figure 7) All of the other scores, KSS pain/motion and KSS function scores, as well as the LEAS and FJS scores, were all similar statistically, as was the range of motion and the long axis x-ray alignment. Discussion & Conclusion. The post and cam posterior-stabilized knee has traditionally been thought to be the best choice for providing stability for knee replacement with PCL-insufficiency or sacrifice. However, this difference in stability as measured with stress xrays did not correlate with any detectible differences in any of the clinical outcomes measurements collected (Knee Society Score, Forgotten Joint Score, Lower Extremity Activity Scale) or in the range of motion or coronal alignment, with the exception of the female subgroup KSS function score. In summary, the CS knee demonstrates greater total antero-posterior laxity compared to the PS knee, as measured by stress radiographs, but there is not a strong correlation with clinical outcomes measurements. A greater number of subjects and/or a younger, higher demand population studied with this protocol might produce greater differences in the outcomes, especially in the FJS score. For any figures or tables, please contact the authors directly

Introduction / Purpose. Many factors can influence postoperative knee flexion angle after total knee arthroplasty (TKA), and range of flexion is one of the most important clinical outcomes. Although many studies have reported that postoperative knee flexion is influenced by preoperative clinical conditions, the factors which affect postoperative knee flexion angle have not been fully elucidated. As appropriate soft-tissue balancing as well as accurate bony cuts and implantation has traditionally been the focus of TKA success, in this study, we tried to investigate the influence of intraoperative soft-tissue balance on postoperative knee flexion angle after cruciate-retaining (CR) TKA using a navigation system and offset-type tensor. Methods. We retrospectively analyzed 55 patients (43 women, 12 men) with osteoarthritis who underwent TKA using the same mobile-bearing CR-type implant (e.motion; B. Braun Aesculap, Germany). The mean age at the time of surgery was 74.2 (SD 7.3) years. The exclusion criteria for this study included valgus deformity, severe bony defect requiring bone graft or augmentation, revision TKA, active knee joint infection, and bilateral TKA. Intraoperative soft-tissue balance parameters such as varus ligament balance and joint component gap were measured in the navigation system (Orthopilot 4.2; B. Braun Aesculap) while applying 40-lb joint distraction force at 0°, 10°, 30°, 60°, 90°, and 120° of knee flexion using an offset-type tensor with the patella reduced. Varus ligament balance was defined as the angle (degree, positive value in varus imbalance) between the seesaw and platform plates of the tensor that was obtained from the values displayed by the navigation system. To determine clinical outcome, we measured knee flexion angle using a goniometer with the patient in the supine position before and 2 years after surgery. Correlations between the soft-tissue parameters and postoperative knee flexion angle were analyzed using simple linear regression models. Pre- and postoperative knee flexion angle were also analyzed in the same manner. Results. Mean pre- and postoperative flexion angle were 120.5 ± 1.9° and 121.9 ± 1.3°, which did not show significant improvement after surgery. Varus ligament balance at 90° of flexion was positively correlated with postoperative knee flexion angle (R = 0.56, P < 0.001) and calculated joint gap of the lateral compartment at 90° of flexion showed positive correlation with postoperative knee flexion angle (R = 0.51, P < 0.001), while no correlation was found between joint gap of the medial compartment at 90° of flexion and postoperative knee flexion angle. Also, as with some past studies, joint component gap at 90° of flexion was slightly correlated with postoperative knee flexion angle (R = 0.30, P < 0.05) and pre- and postoperative knee flexion angle showed a significant positive correlation (R = 0.63, P < 0.001). Conclusions. Varus ligament balance at mid to deep flexion was a factor that predicted postoperative knee flexion angle after CR-TKA. In addition to preoperative knee flexion angle and joint component gap at 90° of flexion, lateral laxity at 90° of flexion is one of the most important factors affecting postoperative knee flexion angle

Non-invasive assessment of lower limb mechanical alignment and assessment of knee laxity using navigation technology is now possible during knee flexion owing to recent software developments. We report a comparison of this new technology with a validated commercially available invasive navigation system. We tested cadaveric lower limbs (n=12) with a commercial invasive navigation system against the non-invasive system. Mechanical femorotibial angle (MFTA) was measured with no stress, then with 15Nm of varus and valgus moment. MFTA was recorded at 10° intervals from full knee extension to 90° flexion. The investigator was blinded to all MFTA measurements. Repeatability coefficient was calculated to reflect each system's level of precision, and agreement between the systems; 3° was chosen as the upper limit of precision and agreement when measuring MFTA in the clinical setting based on current literature. Precision of the invasive system was superior and acceptable in all conditions of stress throughout flexion (repeatability coefficient <2°). Precision of the non-invasive system was acceptable from extension until 60° flexion (repeatability coefficient <3°), beyond which precision was unacceptable. Agreement between invasive and non-invasive systems was within 1.7° from extension to 50° flexion when measuring MFTA with no varus / valgus applied. When applying varus / valgus stress agreement between the systems was acceptable from full extension to 20° & 30° knee flexion respectively (repeatability coefficient <3°). Beyond this the systems did not demonstrate sufficient agreement. These results indicate that the non-invasive system can provide reliable quantitative data on MFTA and laxity in the range relevant to knee examination

Non-invasive assessment of lower limb mechanical alignment and assessment of knee laxity using navigation technology is now possible during knee flexion owing to recent software developments. We report a comparison of this new technology with a validated commercially available invasive navigation system. We tested cadaveric lower limbs (n=12) with a commercial invasive navigation system against the non-invasive system. Mechanical femorotibial angle (MFTA) was measured with no stress, then with 15 Nm of varus and valgus moment. MFTA was recorded at 10° intervals from full knee extension to 90° flexion. The investigator was blinded to all MFTA measurements. Repeatability coefficient was calculated to reflect each system's level of precision, and agreement between the systems; 3° was chosen as the upper limit of precision and agreement when measuring MFTA in the clinical setting based on current literature. Precision of the invasive system was superior and acceptable in all conditions of stress throughout flexion (repeatability coefficient <2°). Precision of the non-invasive system was acceptable from extension until 60° flexion (repeatability coefficient <3°), beyond which precision was unacceptable. Agreement between invasive and non-invasive systems was within 1.7° from extension to 50° flexion when measuring MFTA with no varus / valgus applied. When applying varus / valgus stress agreement between the systems was acceptable from full extension to 30° knee flexion (repeatability coefficient <3°). Beyond this the systems did not demonstrate sufficient agreement. These results indicate that the non-invasive system can provide reliable quantitative data on MFTA and laxity in the range relevant to knee examination

Purpose: The aim of this paper is to draw delegates’ attention to the published evidence that exists about these injuries and to challenge the concept that these laxities can be ignored, especially when associated with injuries to the ACL and PCL. Background: The common impression that injuries to the PLC occur infrequently, require major force and are best treated by early repair, is true for Grade III injuries. Grade II injuries are more common, more difficult to detect clinically and may develop insidiously. Even enhanced MR imaging cannot reliably assess grade II injuries to the PLC. This can result in patients with lack of trust in the knee, pain on kneeling, difficulty with twisting, slopes and rough ground, being reassured by their surgeon that their knee is stable, when both know that this is not the case. Failure to detect a Grade II injury to the PLC in association with an ACL or PCL tear may result in ongoing subtle symptoms of instability, overloading and possible failure of a cruciate reconstruction. Methods: A careful literature review was carried out with particular emphasis on the biomechanical studies which provide the scientific basis on which the common clinical tests are based. Results:. Significant damage to the popliteus mechanism is required to produce a clinically detectable increase in ER. Grade II lesions of the PLC may fail to reach that threshold. Of the traditional tests, only the Dial test and electronic Goniometer test can be easily used towards extension. The former is not very sensitive, the latter is time consuming. Increased posterior tibial translation (PTT) is a more reliable assessment of Grade II lesions and biomechanical studies support the prominent role of the posterolateral corner at 20° of knee flexion. Only two obscure clinical tests and the unpublished posterior Lachman test assess PTT below 30° of knee flexion. Conclusion: Until surgeons specifically test for increased PTT at 10–20° of knee flexion, Grade II lesions of the PLC will largely go unrecognised

There are several methods for evaluating stability of the joint during total knee replacement (TKR). Activities of daily living demand mechanical loading to the knee joint, not only in full extension, but also in mid-flexion. The purpose of this study was to compare the varus-valgus stability throughout flexion in knees treated with either cruciate-retaining or posterior-stabilised TKR, using an intra-operative navigation technique. A total of 34 knees underwent TKR with computer navigation, during which the investigator applied a maximum varus-valgus stress to the knee while steadily moving the leg from full extension to flexion both before and after prosthetic implantation. The femorotibial angle was measured simultaneously by the navigation system at every 10° throughout the range of movement. It was found that posterior-stabilised knees had more varus-valgus laxity than cruciate-retaining knees at all angles examined, and the differences were statistically significant at 10° (p = 0.0093), 20° (p = 0.0098) and 30° of flexion (p = 0.0252).

Cite this article: Bone Joint J 2013;95-B:493–7.

Purpose of the study: Opinions vary concerning results after knee arthroplasty with preservation of the posterior cruciate ligament (PCL) in patients with rheumatoid disease. We report our findings in patients reviewed more than ten years after implantation in comparison with patients treated for osteoarthritis. Material and methods: One surgeon implanted 43 knee arthroplasites (Kali) with preservation of the PCL (9 bilateral cases) in 31 women and 3 men, mean age 53 years (range 30–70 years). Outcome was assessed with the AKS clinical and radiological scores. Passive recur-vatum and posterior drawer at 90° flexion were measured radiographicaly at last follow-up. Outcome was compared with the results observed in a control group of 29 prostheses of the same type implanted for osteoarthritis (among a total of 203 implantations). Results: There were no patients lost to follow-up: two patients were removed from the analysis due to infection on early wound necrosis and late metastatic infection. Eleven patients (16 prostheses) died before ten years follow-up; outcome was satisfactory for the prosthesis. Twenty-one patients (25 prostheses) were reviewed at more than ten years, mean follow-up 136 months. There was one case of supracondylar fracture which healed without sequela after osteosynthesis. The mean knee score was 34.3 preoperatively and 87.2 postoperatively with a mean function score improvement from 17 to 44 points. The pain score (47.3 points on average, was significantly improved while joint range of motion remained unchanged (117°). There were no worrisome lucent lines. Mean recurvatum measured radiographically was 6.9° (range 3–14°) and mean posterior drawer at 90° flexion was 4.2 mm. Outcome in the control group was the same excepting (p< 0.05) for lesser range of motion (109.7°) and better function score (62 points). Laxity (clinical and radiographic scores) were the same. Discussion: The results obtained in patients with rheumatoid disease were satisfactory and the same as those obtained in patients with osteoarthritis and were comparable to those with prostheses sacrificing and replacing the PCL. There were no cases of prosthesis loosening. Complications were very limited and less frequent than among the entire population of 203 prostheses for degenerative disease. Conclusion: Ligament alterations are not a contraindication for preservation of the PCL in patients with rheumatoid arthritis. Irrespective of the etiology, the main limitation on prosthesis longevity is polyethylene wear observed beyond ten years (ten changes of the plateau because of wear among 246 prostheses)

Instability of the thumb trapeziometacarpal joint is a major factor in the cause of degenerative disease. Surgically stabilized joint should be subject to less shear forces and hence, will be less likely to develop degenerative changes. The results of volar ligament reconstruction were assessed in 12 patients (8 men- 4 women). The average age at surgery was 35 years. All thumbs were radiographic stage I. All had failed conservative treatment with splinting and anti-inflammatory medication. Operativelly a strip of Flexor Carpi Radialis tendon was used for ligament reconstruction according to the technique described by Eaton, Glickel and Littler. The follow-up period averaged 7 years. At final follow-up 8 thumbs were stage I, 3 were stage II, and one was stage III. Ten patients were at least 90 % satisfied with the results of the surgery and only two had symptomatic thumb basal joint.

Purpose of the study: For medial osteoarthritis with chronic anterior laxity, we propose an original technique combining subtraction osteotomy and extra-articular ligmentoplasty using the lateral quarter of the patellar tendon.

Material and methods: WE report a retrospective review of 29 patients (11 males/18 females) aged 29–51 years treated from May 1996 to October 2002. Time from rupture of the anterior cruciate ligament (ACL) and the operation was 17.5 years (range 13–22 years). These patients had had 52 prior operations (more than one per knee). All presented functional instability, a positive pivot test, and anterior laxity measured at 8 mm on average (range 5–10 mm) on KT1000. Pain in the medial compartment was observed in all patients with osteoarthritis noted grade II in 7, grade III in 18 and grade IV in 4. Radological varus measured 5–15°. Lateral subtraction osteotomy fixed with a plate was performed in combination with a patellar tendon autograft using the lateral quarter of the patellar tendon. Immediate mobilization with complete weight bearing was the rule.

Results: A mean 5–year follow-up (range 18 months to 9 years). According to the IKDC subjective score, 26 patients were satisfied or very satisfied and 22 of them had resumed their sports activities. Instability persisted in one patient and pain in two. Varus was corrected in three patients but the medial degradation progressed. Anterior laxity measured with KT1000 was 1–6 mm (mean 2 mm). The pivot test was positive in one knee, negative in 18 and revealed slight displacement in 10. Excluding the radiological aspect, the overall IKDC score was 2A, 21B, 6C, 1D.

Conclusion: This combined method is particularly interesting for stabilizing chronic ACL instability causing secondary medial degeneration. It treats two conditions with the same approach with an acceptable rate of satisfaction.

Introduction: Instrumented arthrometry is a widely used technique for the quantification of cruciate ligament laxity. It is used both before and after surgery. The Rolimeter(Aircast, Europe) is used in such scenarios. It has several advantages over its cousins; it is more compact, lighter, less expensive and amenable to sterilization techniques. The other leading arthrometers have however had over 15 years of clinical use and their reliability has been thoroughly assessed. Muellner et al found no significant difference in the intra-tester and inter-tester results obtained on Rolimeter assessment of the knees of un-injured healthy subjects. Our study assessed the inter-tester and intra-tester variability when the Rolimeter is applied to patients with unilateral ACL-deficient knees. It also examines whether the level of experience of the examiner influences the results in this group of patients.

Materials and Methods: Six examiners each examined thirty-three subjects on two occasions. One examiner was medically qualified but had never performed a Lachman or anterior drawer test. Two examiners were qualified physiotherapists who routinely examined knees, but had never used a Rolimeter. One medically qualified examiner was considered to be of intermediate experience.Two examiners were regarded as expert Rolimeter users.For each examination a Rolimeter reading was taken three times with the knee at 30 degrees of flexion and three times at 90 degrees of flexion for both knees.The interval between examinations was at least thirty minutes. All the readings were acquired on the same day. The examiners were blinded to whether the subject was known to be ACL deficient or not. The results of the examinations were entered onto a data-base.Repeated measures analysis of variance was used to test for the effects of the following factors, difference between examiners, reproduction of results between examinations.

Results: There was no significant difference between each set of measures for each subject between examinations (p=0.767), indicating that the measurement procedure was reliable. Measurements were significantly higher in patients with ACL-deficient knees compared to the control group (p< 0.001) confirming the sensitivity of the Rolimeter to help diagnose ACL-deficient knees. The in-experienced examiner’s measurements were lowest and were more reliable. The examiner with the intermediate experience was the most un-reliable. Both experienced examiners were in close agreement.

Conclusion: We have demonstrated that the rolimeter is reliable in the assesment of ACL deficient patients regardless of the experience of the examiner.

In vivo and in vitro studies of ceramic on ceramic (COC) bearings have demonstrated that swing phase microseparation followed by the impact of the femoral head on the superior acetabular insert rim leads to accelerated wear. However, resultant wear remained low. The wear of ceramic on polyethylene (COP) and metal on metal (MOM) couples under swing phase microseparation is unknown, this study aimed to compare the wear of these total hip replacements under standard and microseparation conditions.

A physiological hip simulator was used, loads and motions were applied to approximate in vivo conditions. Microseparation was achieved by displacing the femoral head inferiorly during swing phase, the head contacted the inferior cup rim and was laterally displaced. On heel strike the head contacted the superior cup rim prior to relocation. Components (as shown in table 1) were tested for 5 million cycles, at a frequency of 1 hertz in 25% (v/v) new born calf serum. Under standard conditions, wear of COC and MOM bearings was significantly lower than wear of COP couples. Under microseparation conditions the COC and MOM wear increased by 4 and 25 times respectively. Microseparation conditions reduced wear of COP couples by a factor of 4. Creep deformation and damage to the UHMWPE cup rim was observed, however, wear remained low. It is postulated that this reduction in polyethylene wear is due to the separation of the components in swing phase improving the entrapment of lubricant, hence wear is reduced via a squeeze film lubrication mechanism.

Aims. The aim of this study was to evaluate whether achieving medial joint opening, as measured by the change in the joint line convergence angle (∆JLCA), is a better predictor of clinical outcomes after high tibial osteotomy (HTO) compared with the mechanical axis deviation, and to find individualized targets for the redistribution of load that reflect bony alignment, joint laxity, and surgical technique. Methods. This retrospective study analyzed 121 knees in 101 patients. Patient-reported outcome measures (PROMs) were collected preoperatively and one year postoperatively, and were analyzed according to the surgical technique (opening or closing wedge), postoperative mechanical axis deviation (deviations above and below 10% from the target), and achievement of medial joint opening (∆JLCA > 1°). Radiological parameters, including JLCA, mechanical axis deviation, and the difference in JLCA between preoperative standing and supine radiographs (JLCA. PD. ), an indicator of medial soft-tissue laxity, were measured. Cut-off points for parameters related to achieving medial joint opening were calculated from receiver operating characteristic (ROC) curves. Results. Patients in whom the medial joint opening was achieved had significantly better postoperative PROMs compared with those without medial opening (all p < 0.05). Patients who were outliers with deviation of > 10% from the target mechanical axis deviation had significantly similar PROMs compared with patients with an acceptable axis deviation (all p > 0.05). Medial joint opening was affected by postoperative mechanical axis deviation and JLCA. PD. The influence of JLCA. PD. on postoperative axis deviation was more pronounced in a closing wedge than in an opening wedge HTO. Conclusion. Medial joint opening rather than the mechanical axis deviation determined the clinical outcome in patients who underwent HTO. The JLCA. PD. identified the optimal postoperative axis deviation necessary to achieve medial joint opening. For patients with increased laxity, lowering the target axis deviation is recommended to achieve medial joint opening. The target axis deviation should also differ according to the technique of undergoing HTO. Cite this article: Bone Joint J 2024;106-B(3):240–248

Introduction. Anterior tibial translation (ATT) is assessed in the acutely injured knee to investigate for ligamentous injury and rotational laxity. Specifically, there is a growing recognition of the significance of anterior medial rotary laxity (AMRI) as a crucial element in assessing knee stability. Anterior cruciate ligament (ACL) injuries are often accompanied with medial collateral ligament (MCL) damage. It has been suggested that Deep MCL (dMCL) fibres are a primary restraint in rotational displacement. This research aims to quantify the difference in rotational laxity of patients with ACL and MCL injuries to deem if the Feagin-Thomas test can robustly capture metrics of AMRI. 2. Methods. AMRI was assessed using the Feagin-Thomas test in 7 isolated ACL (iACL) injured participants, 3 combined ACL and superficial fibre MCL (sMCL) injuries, 5 combined ACL and deep fibre MCL injuries, and 21 healthy controls. Displacement values were recorded using an optical motion capture (OMC) system and bespoke processing pipeline which map and model the knee's anterior displacement values relative to the medial compartment. Since absolute values (mm) of rotational laxity vary dependant on the person, values were recorded as a proportion of the rotational laxity obtained from the subject's contralateral leg. Values were compared between each patient group using an ANOVA test and Tukey's honesty significant difference post hoc test. 3. Results. The healthy control group had a median proportion of 0.97 (3SF), whilst the iACL was 1.12 (3SF), a 12% increase in rotational laxity in the injured leg. The sMCL group yielded a result of 1.64 (3SF), a 64% increase in rotational laxity in the injured leg; finally, dMCL resulted in a proportion of rotational laxity of 1.90 (3SF), a 90% increase in rotational laxity [table 1]. Whilst all groups showed differences in the increase of rotational laxity, dMCL was significantly different from the healthy control group (P value 0.0041). 4. Conclusion. ACL injuries with MCL involvement led to an increase in anterior medial rotary laxity and this is more evident in patients where deep MCL fibres are involved. The Feagin-Thomas test appears to be sensitive in detecting differences in AMRI and should be considered when performing comprehensive clinical knee examination. For any figures or tables, please contact authors directly

Aims. The goal was to evaluate tibiofemoral knee joint kinematics during stair descent, by simulating the full stair descent motion in vitro. The knee joint kinematics were evaluated for two types of knee implants: bi-cruciate retaining and bi-cruciate stabilized. It was hypothesized that the bi-cruciate retaining implant better approximates native kinematics. Methods. The in vitro study included 20 specimens which were tested during a full stair descent with physiological muscle forces in a dynamic knee rig. Laxity envelopes were measured by applying external loading conditions in varus/valgus and internal/external direction. Results. The laxity results show that both implants are capable of mimicking the native internal/external-laxity during the controlled lowering phase. The kinematic results show that the bi-cruciate retaining implant tends to approximate the native condition better compared to bi-cruciate stabilized implant. This is valid for the internal/external rotation and the anteroposterior translation during all phases of the stair descent, and for the compression-distraction of the knee joint during swing and controlled lowering phase. Conclusion. The results show a better approximation of the native kinematics by the bi-cruciate retaining knee implant compared to the bi-cruciate stabilized knee implant for internal/external rotation and anteroposterior translation. Whether this will result in better patient outcomes remains to be investigated. Cite this article: Bone Joint Res 2023;12(4):285–293

Rotational laxity increases the risk of anterior cruciate ligament (ACL) injuries and residual rotational laxity can result in inferior surgical outcomes and risk of retears. The dynamic rotatory knee stability can be assessed through manual examination, but it is limited to the surgeon's experience and it provides inaccurate measurements, highlighting the need for objective measurement of knee rotational laxity. The objective measurement of knee laxity can help to better identify patients that may benefit from conservative treatment or those that require surgical treatment with or without concomitant extra-articular procedures. We rely in Porto Knee Testing Device (PKTD®) to accurately measure sagittal and rotatory laxity of the knee, either individually or in a combined fashion. The PKTD® is safe and can be used in combination with CT or MRI, which allows to assess both the “anatomy” and the “function” in the same examination. By this way, we may have a total ACL rupture and a stable knee not requiring surgery or, on the other hand, the same injury scenario but with an unstable knee that requires surgical intervention (with or without lateral extra-articular tenodesis). In cases of partial ACL tears, it may be possible to identify some ligamentous fibers that remain functional, where the conservative treatment or augmentation techniques can provide satisfactory results. It can also identify when a posteromedial or posterolateral instability is associated. The PKTD® can also be used to follow-up the laxity results of conservative and surgical procedures and contribute to the decision-making of return to sports

Abstract. Introduction. Derby technique for posterolateral corner (PLC) reconstruction uses a doubled gracilis autograft to reconstruct the popliteo-fibular ligament (PFL) and a split biceps tendon transfer to reconstruct the lateral collateral ligament (LCL). We report midterm outcomes of a case series who underwent PLC reconstruction. Methodology. A retrospective review of 27 patients who underwent PLC reconstruction from 2012 until 2018 was performed (6 females, 21 males, median age 26). Median time interval from injury to primary procedure was 10 months. Outcomes were recorded as per clinical assessment and outcome scores. Results. All patients had no varus laxity in full knee extension. Similarly, at 30° of knee flexion, 25 patients (92.5%) had no varus laxity and 2 patients (7.5%) had grade 1 laxity. No patients demonstrated abnormal external rotation at final follow up. Outcome scores were obtained from 17 patients who underwent primary ligament reconstruction at a mean follow up of 72 months postoperatively. The mean Lysholm score was 94 +/-5.5 (72–100) and mean subjective IKDC score was 78/87 (89.6%) (51–87). 90% of our patients had gained normal or nearly normal IKDC scores on returning to routine activities of daily living and sports following surgery compared to their pre-injury status. Conclusion. Our technique enables an anatomical LCL & PFL reconstruction in isolation or in combination with ACL/PCL reconstruction or to augment an acute repair without contralateral graft harvest or allograft. The functional knee scores demonstrated in this cohort are comparable and in fact superior to previously published knee scores after PLC reconstruction

Anterior cruciate ligament (ACL) graft failure from rupture, attenuation, or malposition may cause recurrent subjective instability and objective laxity, and occurs in 3% to 22% of ACL reconstruction (ACLr) procedures. Revision ACLr is often indicated to restore knee stability, improve knee function, and facilitate return to cutting and pivoting activities. Prior to reconstruction, a thorough clinical and diagnostic evaluation is required to identify factors that may have predisposed an individual to recurrent ACL injury, appreciate concurrent intra-articular pathology, and select the optimal graft for revision reconstruction. Single-stage revision can be successful, although a staged approach may be used when optimal tunnel placement is not possible due to the position and/or widening of previous tunnels. Revision ACLr often involves concomitant procedures such as meniscal/chondral treatment, lateral extra-articular augmentation, and/or osteotomy. Although revision ACLr reliably restores knee stability and function, clinical outcomes and reoperation rates are worse than for primary ACLr. Cite this article: Bone Joint J 2023;105-B(5):474–480