Periprosthetic fractures (PPF) of the femur following total hip arthroplasty represent a significant complication with a rising incidence. The commonest subtype is Vancouver B2 type, for which revision to a long uncemented tapered fluted stem is a widely accepted management. In this study we compare this procedure to the less commonly performed cement-in-cement revision. All patients undergoing surgical intervention for a Vancouver B2 femoral PPF in a cemented stem from 2008 – 2018 were identified. We collated patient age, gender, ASA score, BMI, operative time, blood transfusion requirement, change in haemoglobin (Hb) level, length of hospital stay and last Oxford Hip Score (OHS). Radiographic analysis was performed to assess time to fracture union and leg length discrepancy. Complications and survivorship of implant and patients were recorded. 43 uncemented and 29 cement-in-cement revisions were identified. There was no difference in patient demographics between groups. A significantly shorter operative time was found in the cement-in-cement group, but there was no difference in transfusion requirement, Hb change, or length of hospital stay. OHS was comparable between groups. A non-significant increase in overall complication rates was found in the revision uncemented group, with a significantly higher dislocation rate. Time of union was comparable and there were no non-unions in the cement-in-cement group. A greater degree of stem subsidence was found in the uncemented group. There was no difference in any revision surgery required in either group. Three patients in the uncemented group died in the perioperative period, compared to none in the cement-in-cement group. With appropriate patient selection, both cement-in-cement and long uncemented tapered stem revision represent appropriate treatment options for Vancouver B2 fractures.
The mobile bearing Oxford unicompartmental knee arthroplasty (OUKA) is recommended to be performed with the leg in the hanging leg (HL) position, and the thigh placed in a stirrup. This comparative cadaveric study assesses implant positioning and intraoperative kinematics of OUKA implanted either in the HL position or in the supine leg (SL) position. A total of 16 fresh-frozen knees in eight human cadavers, without macroscopic anatomical defects, were selected. The knees from each cadaver were randomized to have the OUKA implanted in the HL or SL position.Aims
Methods
The purpose of this study was to evaluate whether an innovative
templating technique could predict the need for acetabular augmentation
during primary total hip arthroplasty for patients with dysplastic
hips. We developed a simple templating technique to estimate acetabular
component coverage at total hip arthroplasty, the True Cup: False
Cup (TC:FC) ratio. We reviewed all patients with dysplastic hips
who underwent primary total hip arthroplasty between 2005 and 2012.
Traditional radiological methods of assessing the degree of acetabular dysplasia
(Sharp’s angle, Tönnis angle, centre-edge angle) as well as the
TC:FC ratio were measured from the pre-operative radiographs. A
comparison of augmented and non-augmented hips was undertaken to
determine any difference in pre-operative radiological indices between
the two cohorts. The intra- and inter-observer reliability for all
radiological indices used in the study were also calculated.Aims
Patients and Methods
Despite the success of total knee arthroplasty (TKA) restoration of normal function is often not achieved. Soft-tissue balance is a major factor leading to poor outcomes including malalignment, instability, excessive wear, and subluxation. Mechanical ligament balancers only measure the joint space in full extension and at 90° flexion. This study uses a novel electronic ligament balancer to measure the ligament balance in normal knees and in knees after TKA to determine the impact on passive and active kinematics. Fresh-frozen cadaver legs (N = 6) were obtained. A standard cruciate-retaining TKA was performed using measured resection approach and computer navigation (Stryker Navigation, Kalamazoo, MI). Ligament balance was measured using a novel electronic balancer (Fig 1, XO1, XpandOrtho, Inc, La Jolla, CA, USA). The XO1 balancer generates controlled femorotibial distraction of up to 120N. The balancer only requires a tibial cut and can be used before or after femoral cuts, or after trial implants have been mounted. The balancer monitors the distraction gap and the medial and lateral gaps in real time, and graphically displays gap measurements over the entire range of knee flexion. Gap measurements can be monitored during soft-tissue releases without removing the balancer. Knee kinematics were measured during active knee extension (Oxford knee rig) and during passive knee extension under varus and valgus external moment of 10Nm in a passive test rig. Sequence of testing and measurement:
Ligament balance was recorded with the XO1 balancer after the tibial cut, after measured resection of the femur, and after soft-tissue release and/or bone resection to balance flexion-extension and mediolateral gaps. Passive and active kinematics were measured in the normal knee before TKA, after measured resection TKA, and after soft-tissue release and/or bone resection to balance flexion-extension and mediolateral gaps.Background
Methods
The effect of each step of medial soft tissue release was assessed taking the expansion strength and patellar condition into account in five fresh frozen normal cadaver specimens. In each cadaver specimen, only proximal tibia was cut. Then, ACL was cut, and deep MCL fiber was released. This condition was set as “the basic”. Joint gap distance and angle were measured at full extension, 30°, 60°, 90°, 120° flexion and in full flexion. The measurement was firstly done with the standard tensor/balancer with the patella everted, and the next with the offset tensor/balancer with the patella reduced. The torque of 10, 20 and 30 inch-pounds were applied through the specialized torque wrench. After the measurement in “the basic”, PCL, MCL superficial fibres, pes anserinus and semi-membranosus were released step by step. Measuring the joint gap distance and angle with the same scheme above were conducted after the each step.Introduction
Methods
Despite the success of total knee arthroplasty (TKA) restoration of normal function is often not achieved. Soft tissue balance is a major factor for poor outcomes including malalignment, instability, excessive wear, and subluxation. Computer navigation and robotic-assisted systems have increased the accuracy of prosthetic component placement. On the other hand, soft tissue balancing remains an art, relying on a qualitative feel for the balance of the knee, and is developed over years of practice Several instruments are available to assist surgeons in estimating soft tissue balance. However, mechanical devices only measure the joint space in full extension and at 90° flexion. Further, because of lack of comprehensive characterization of the ligament balance of healthy knees, surgeons do not have quantitative guidelines relating the stability of an implanted to that of the normal knee. This study measures the ligament balance of normal knees and tests the accuracy of two mechanical distraction instruments and an electronic distraction instrument. Cadaver specimens were mounted on a custom knee rig and on the AMTI VIVO which replicated passive kinematics. A six-axis load cell and an infrared tracking system was used to document the kinematics and the forces acting on the knee. Dynamic knee laxity was measured under 10Nm of varus/valgus moment, 10Nm of axial rotational moment, and 200N of AP shear. Measurements were repeated after transecting the anterior cruciate ligament, after TKA, and after transecting the posterior cruciate ligament. The accuracy and reproducibility of two mechanical and one electronic distraction device was measured.Background
Methods
Cement in cement revision with preservation of the original cement mantle has become an attractive and commonly practised technique in revision hip surgery. Since introducing this technique to our unit we have used two types of polished tapered stem. We report the clinical and radiological outcomes for cement in cement femoral revisions performed using these prostheses. All patients who underwent femoral cement in cement revision with a smooth tapered stem between 2005 –2013 were assessed. Data collected included indication for revision surgery and components used. All patients were followed up annually. Outcomes recorded were radiographic analysis, clinical outcome scores (Oxford Hip Score, WOMAC and SF-12) and complications, including requirement for further revision surgery. Median follow-up was 5 years (range 1 – 8 years). 116 revision procedures utilising cement in cement femoral revision were performed in the 8 year study period (68 females, 48 males, and mean age of 69 years). The femoral component was a C-stem AMT (Depuy) in 59 cases and Exeter stem (Stryker) in 57 cases.Introduction
Materials and Methods
Ganz peri-acetabular osteotomy is commonly used to treat symptomatic hip dysplasia. It aims to increase the load bearing contact area of the hip to reduce the risk of subsequent osteoarthritis. In this study we assess the radiographic and clinical results of the procedure since its introduction to our unit. All patients undergoing Ganz osteotomies at our unit were followed up prospectively. Data collected included patient demographics and pre- and post-operative functional scores (Harris and Non-arthritic hip scores). In addition, acetabular correction was evaluated on pre-and post-operative radiographs (using Centre-Edge angle and Tonnis angle). Complications were also noted. Overall 50 procedures were performed between 2007 and 2013 with median follow-up of 3 years (1 – 7 years). The majority of patients (90%) were female. Average age at time of surgery was 29 years (16–49). There were significant improvements in pre- and post-operative median functional scores (Modified Harris Hip Score = 49 versus 64, p=0.001), Non-arthritic Hip Score = 42 versus 56, p=0.007). Median Centre Edge Angle improved from 16 degrees pre-operatively (range = 7–31 degrees) to 30 degrees post-operatively (18–33) degrees), p<0.0001. Similarly, pre-operative Tonnis angle improved from 18 degrees (9–38) to 7 degrees (2–14), p<0.0001. Five patients developed post-operative complications: 2 superficial wound infection, 1deep infection requiring hip washout and antibiotic treatment and 2 patients subsequently requiring total hip replacements. We have shown that the Ganz peri-acetabular osteotomy can be effective for the treatment of painful hip dysplasia improving both functional and radiographic outcomes. However, patient selection is a key factor.
Two major challenges in arthroplasty are obesity and antibiotic resistance. This study was performed to characterise the organisms responsible for deep infection following total hip arthroplasty and to determine if obesity affected the microbiology profile. A retrospective analysis of the national surgical site infection register was made to obtain data regarding deep infection following 10948 primary total hip arthroplasty (THA) from 1998–2013, with a minimum of 2 year follow-up. Of all the primary THAs performed, there were 108 deep infections (56 patients had a BMI >30 (obese) and 52 patients <30). There were no significant differences between cardio-respiratory disease, smoking and alcohol status, and diabetes between the 2 groups. Over the last 15 years, staphylococcus aureus continues to be the most frequently isolated organism. Infection with multiple organisms was found exclusively in obese patients. Furthermore, in obese patients, there was a linear increase with methicillin resistant staphylococcus aureus (MRSA) infections and streptococcus viridans. On this basis, we recommend careful selection of antibiotic therapy in obese patients, rather than empirical therapy, which can be especially important if there is no growth in an infected THA. In addition, a preoperative discussion regarding dental prophylaxis against streptococcus viridans may be warranted.
Postgraduate training in orthopaedics has traditionally been delivered through an apprenticeship model. However, junior doctor working patterns have more recently moved away from a team based structure, potentially affecting training experience. We aimed to compare the perceived quality of training between medical students, junior non-orthopaedic trainees and orthopaedic specialty trainees. We conducted an anonymous questionnaire of all medical students and trainees rotating through our unit over 24 months. The questionnaire contained 6, 10-point Likert rating scale questions and free text responses. Results were collated and analysed according to training stage. Of 82 questionnaires distributed, 60 (73%) were completed (18 specialty registrars, 22 junior trainees and 20 medical students). Junior trainees consisted of 8 GPSTs and 14 Foundation Year (FY2) doctors, only one of whom had specifically chosen an orthopaedic placement. Median Likert rating of training experience was (1 = very poor, 10 = excellent): ST4-ST8 = 8 (range 7–9), ST1-ST3 = 7 (6–9), GPSTs/FY2s = 4 (2–5) and medical students = 8 (7–10). Further analysis of junior non-orthopaedic doctors' training experience showed that placement induction, organisation of formal teaching and opportunities for training out with formal sessions were rated as poor. However, content of delivered teaching was rated highly. Free text responses identified several barriers to training including being too busy on wards and no opportunity for protected teaching. Our study shows that junior non-orthopaedic trainees feel their training experience during orthopaedic placements is much poorer than orthopaedic trainees and medical students. Time constraints and less team based working patterns may detract from their teaching opportunities. In addition, junior doctors rotating through orthopaedic units now have a wider spectrum of career interests with heterogeneous training needs. Therefore, orthopaedic departments may need to adopt a more targeted training programme that recognises individual training needs if junior doctor training is to improve.
Ganz peri-acetabular osteotomy is commonly used to treat symptomatic hip dysplasia. It aims to increase the load bearing contact area of the hip to reduce the risk of subsequent osteoarthritis. In this study we assess the radiographic and clinical results of the procedure since its introduction to our unit. All patients undergoing Ganz osteotomies at our unit were followed up prospectively. Data collected included patient demographics and pre- and post-operative functional scores (Harris and Non-arthritic hip scores). In addition, acetabular correction was evaluated on pre-and post-operative radiographs (using Centre-Edge angle and Tonnis angle). Complications were also noted. Overall 50 procedures were performed between 2007 and 2013 with median follow-up of 3 years (1–7 years). The majority of patients (90%) were female. Average age at time of surgery was 32 years (17–39). There were significant improvements in pre- and post-operative median functional scores (Modified Harris Hip Score = 52 versus 63, p=0.001), Non-arthritic Hip Score = 49 versus 60, p=0.01). Median Centre Edge Angle improved from 15 degrees pre-operatively (range = 8–19 degrees) to 29 degrees post-operatively (22–36 degrees), p=0.02. Similarly, pre-operative Tonnis angle improved from 19 degrees (16–38) to 7 degrees (2–14), p=0.01. Four patients developed post-operative complications: 1 superficial wound infection, 1deep infection requiring hip washout and antibiotic treatment and 2 patients subsequently requiring total hip replacements. We have shown that the Ganz peri-acetabular osteotomy can be effective for the treatment of painful hip dysplasia improving both functional and radiographic outcomes. However, patient selection is a key factor.
When performing total hip replacements in patients with hip dysplasia, acetabular augmentation may be required to prevent early component failure. Preoperative radiographic templating may help estimate acetabularcomponent coverage but has not previously been shown to predict the need for augmentation. We developed a simple method to estimate the percentage of acetabular component coverage from pre-operative radiographs (True: False cup ratio). We aimed to evaluate whether this couldpredict the need foracetabular augmentation at primary total hip replacement for patients with dysplastic hips. We reviewed all patients with hip dysplasia who underwent a primary total hip replacement from 2005–2012. Classification of hip dysplasia (Crowe), centre edge angle (CEA), Sharp and Tonnis angles were determined on pre-operative radiographs for each patient. Templating was performed on anteroposteriorand lateral view hip radiographs to determine the likely percentage of acetabular component coverage using the True: False cup ratio. Patients requiring acetabular augmentation at time of primary total hip arthroplasty were noted. 128 cases were reviewed, 31 (24%) required acetabularaugmentation. Comparison between augmented and non-augmented cases revealed no difference in the mean CEA (p = 0.19), Sharp angles (p = 0.76) or Tonnis angles (p = 0.32). A lower True Cup: False Cup ratio was observed in the augmented groupcompared to the non-augmented group(median = 0.68 vs 0.88, p < 0.01). Preoperative templating can help predict which dysplastic hips are likely to require acetabular augmentation at primary total hip replacement.
Femoroacetabular impingement (FAI) is the result of abnormal contact/impingement of the femoral head-neck junction and acetabulum during motion. This can be corrected by surgical dislocation (using Ganz's trochanteric osteotomy) and femoral osteochondroplasty +/− acetabular rim resection. Our study aimed to assess the improvement in hip scores following open osteochondroplasty to predict outcomes based on patient characteristics. This was a retrospective case note analysis of a single surgeon case series over a 4 year period. Inclusion criteria were open osteochondroplasty, complete pre- and post-op hip scores available), Tonnis osteoarthritis grade 0 or 1, with 1 year followup. Data was extracted from electronic and paper case notes for pre- and post-op Modified Harris Hip Scores (MHHS), Non-arthritis Hip Scores (NAHS) and SF-12 general satisfaction scores, as well as baseline patient demographics. Two independent observers used the PACS radiology system to examine x-rays and MRI. SPSS version 19 was used for statistical analysis. 42 patients met the inclusion criteria. There was an overall improvement in hip scores after the procedure. Mean pre-op scores were MHHS 52.5, NAHS 44.0, SF-12 32.1. Mean post-op scores were MHHS 66.1, NAHS 58.7, SF-12 36.4. Therefore mean improvements were seen in MHHS (13.6), NAHS (14.7) and SF-12 (4.3), all significant at p<0.005 when paired t-test was used for analysis. Pearson correlation for subgroup analysis showed no significant correlation of scores with age, centre-edge angle or alpha angles. Furthermore, no significant difference was seen between males and females (independent t test). Open osteochondroplasty improves symptoms and function based on patient reported outcome measures. Although the mean scores improved, some patients’ scores deteriorated. We have not identified any statistically significant predictors of outcome, and therefore patient selection remains unclear.
Kinematic studies are used to evaluate function and efficacy of various implant designs. Given the large variation between subjects, matched pairs are ideal when comparing competing designs. It is logical to deduce that both limbs in a subject will behave identically during a given motion [1], barring unilateral underlying pathology, thus allowing for the most direct comparison of two designs. It is our goal to determine if this is a valid assumption by assessing whether or not there are significant differences present in the kinematics of left and right knees from the same subject. Gait studies have compared pre-and postoperative implantation kinematics for various pathologies like ACL rupture [2] and osteoarthritis [3, 4]. We designed a study to assess squatting in cadaver specimens. Sixteen matched pairs of fresh-frozen cadavers, (Eleven males, five females; aged 71 years [± 10 yrs]) were tested. Each knee, intact, was tested by mounting it on a dynamic, quadriceps-driven, closed-kinetic-chain Oxford knee rig (OKR), which simulated a deep knee bend from full extension to 120° flexion. We chose femoral rollback, tibiofemoral external rotation, tibial adduction, patellofemoral tilt and shift as our outcomes, which were recorded using an active infrared tracking system.Introduction:
Methods:
Subsidence of cementless femoral stems in total hip arthroplasty (THA) has been associated with poor initial fixation and subsequent risk of aspectic loosening. There is limited literature on how subsidence of cementless, proximally porous coated, tapered wedge femoral stems impacts the patient clinically. The aim of our study was to assess whether subsidence with these stems is associated with a decline in clinical function. A review of a prospectively collected database of THAs performed by a single surgeon at one institution using two cementless, tapered wedge stem designs from January 2006 to June 2010 was performed. Radiographic analysis using Picture Archiving and Communications System (PACS) was used to identify patients with greater than 1.5 mm of subsidence, and to document osseointegration. Preoperative and postoperative pain and Harris hip scores were recorded; and analyzed to identify if the clinical recovery pattern of the subsidence versus no subsidence groups differed. Protected weight bearing was recommended to all patients with subsidence.Introduction:
Method:
Despite over 95% long-term survivorship of TKA, 14–39% of patients express dissatisfaction due to anterior knee pain, mid-flexion instability, reduction in range of flexion, and incomplete return of function. Changing demographics with higher expectations are leading to renewed interest in patient-specific designs with the goal of restoring of normal kinematics. Improved imaging and image-processing technology coupled with rapid prototyping allow manufacturing of patient-specific cutting guides with individualized femoral and tibial components with articulating surfaces that maximize bony coverage and more closely approximate the natural anatomy. We hypothesized that restoring the articular surface and maintaining medial and lateral condylar offset of the implanted knee to that of the joint before implantation would restore normal knee kinematics. To test this hypothesis we recorded kinematics of patient-specific prostheses implanted using patient-specific cutting guides. Preoperative CT scans were obtained from nine matched pairs of human cadaveric knees. One of each pair was randomly assigned to one of two groups: one group implanted with a standard off-the-shelf posterior cruciate-retaining design using standard cutting guides based on intramedullary alignment; the contralateral knee implanted with patient-specific implants using patient-specific cutting guides, both manufactured from the preoperative CT scans. Each knee was tested preoperatively as an intact, normal knee, by mounting the knee on a dynamic, quadriceps-driven, closed-kinetic-chain Oxford knee rig (OKR), simulating a deep knee bend from 0° to 120° flexion. Following implantation with either the standard or patient-specific implant, knees were mounted on the OKR and retested. Femoral rollback, tibiofemoral rotation, tibial adduction, patellofemoral tilt and shift were recorded using an active infrared tracking system.Introduction:
Methods:
Repeat revision hip replacements can lead to severe bone loss necessitating salvage procedures such as proximal or total femoral replacement. We present medium term outcomes from our experience of the Limb Preservation System (LPS) in patients with failed revision hip arthroplasties. All patients undergoing proximal femoral or total femoral replacement from 2003–2007 at our unit were reviewed. Data was collected preoperatively and at annual assessment post procedure for a minimum of 5 years. This included clinical review, functional outcome scores (WOMAC, Oxford Hip Score, Harris Hip Score) and radiographic evaluation. A total of 17 patients underwent femoral replacement (13 proximal, 4 total) using the LPS during the study period. Within this cohort there were 13 males and 4 females with a mean age of 64 years (range 47–86). Median follow up was 7 years (range 5–9 years). Primary diagnoses were DDH (7), Primary OA (5), RA (2), proximal femoral fracture (2) and phocomelia (1). Five patients (29%) required further revision surgery for infection (2 patients) or recurrent dislocations (3 patients). No stems required revision due to aseptic loosening or stem failure at 5–9 years. Compared to preoperative assessment, there was significant improvement in median outcome scores at 5 years (WOMAC increased by 33 points, Oxford hip score by16 points and Harris hip score by 43 points). 82% of patients maintained functional independence at latest review. The Limb Preservation System offers a salvage procedure for failed revision total hip arthroplasty with significant symptom and functional improvement in most patients at medium term follow up.
Femoroacetabular impingement (FAI) is a significant cause of osteoarthritis in young active individuals but the pathophysiology remains unclear. Increasing mechanistic studies point toward an inflammatory component in OA. This study aimed to characterise inflammatory cell subtypes in FAI by exploring the phenotype and quantification of inflammatory cells in FAI versus OA samples. Ten samples of labrum were obtained from patients with FAI (confirmed pathology) during open osteochondroplasty or hip arthroscopy. Control samples of labrum were collected from five patients with osteoarthritis undergoing total hip arthroplasty. Labral biopsies were evaluated immunohistochemically by quantifying the presence of macrophages (CD68 and CD202), T cells (CD3), mast cells (mast cell tryptase) and vascular endothelium (CD34). Labral biopsies obtained from patients with FAI exhibited significantly greater macrophage, mast cell and vascular endothelium expression compared to control samples. The most significant difference was noted in macrophage expression (p<0.01). Further sub typing of macrophages in FAI using CD202 tissue marker revealed and M2 phenotype suggesting that these cells are involved in a regenerate versus a degenerate process. There was a modest but significant correlation between mast cells and CD34 expression (r=0.4, p<0.05) in FAI samples. We provide evidence for an inflammatory cell infiltrate in femoroacetabular impingement. In particular, we demonstrate significant infiltration of mast cells and macrophages suggesting a role for innate immune pathways in the events that mediate hip impingement. Further mechanistic studies to evaluate the net contribution and hence therapeutic utility of these cellular lineages and their downstream processes may reveal novel therapeutic approaches to the management of early hip impingement.
Vancouver B fractures around a cemented polished tapered stem (CTPS) are often treated with revision arthroplasty. Results of osteosynthesis in these fractures are poor as per current literature. However, the available literature does not distinguish between fractures around CTPS from those around other stems. The aim of our study was to assess the clinical and radiological outcome of open reduction and internal fixation in Vancouver B fractures around CTPS using a broad non-locking plate. Patients treated with osteosynthesis between January 1997 and July 2011 were retrospectively reviewed. All underwent direct reduction and stabilisation using cerclage wires before definitive fixation with a broad DCP. Bicortical screw fixation was obtained in the proximal and distal fragments. We defined failure of treatment as revision for any cause. 101 patients (42 men and 59 women, mean age 79) were included. 70 had minimum follow-up of 6 months. 63 of these went on to clinical and radiological union. Three developed infected non-union. 7 had failure of fixation. Lack of anatomical reduction was the commonest predictor of failure followed by inadequate proximal fragment fixation and infection. 14 patients dropped at least 1 mobility grade from their preoperative status. This is the largest series of a very specific group of periprosthetic fractures treated with osteosynthesis. Patients who develop these fractures are often frail and “high risk” for major revision surgery. We recommend osteosynthesis for patients with Vancouver B periprosthetic fractures around CTPS provided these fractures can be anatomically reduced and adequately fixed.
The outcome of periacetabular osteotomy in dysplastic hips is dependent on the absence of pre-operative osteoarthritis [OA]. The purpose of this study was to analyze whether Tonnis grading is a reliable predictor of OA in patients with hip dysplasia. Thirty patients were identified who had undergone hip arthroscopy surgery to assess their suitability for periacetabular osteotomy. Radiographs were assessed for anterior centre edge angle, lateral centre edge angle, Tonnis angle and Tonnis grade for OA changes. The radiographic grading of OA was compared with arthroscopic findings.Introduction
Methods
Reconstruction of an acetabulum following severe bone loss can be challenging. The aim of this study was to determine the outcome of acetabular reconstruction performed using trabecular metal shell for severe bone loss. Between June 2003 and June 2006 a total of 29 patients with significant acetabular bone stock deficiency underwent revisions using trabacular metal shell. According to Paprosky classification, there were 18 patients with grade IIIA and 11 patients with grade IIIB defects. Nineteen patients required augments to supplement the defects. Functional clinical outcomes were measured by WOMAC and Oxford hip. Detailed radiological assessments were also made. At most recent follow up (average 5.5 years, range 3.5–8.5) the mean Oxford hip score improved from 12 preoperatively to 27.11 postoperatively and WOMAC score from 17.57 preoperatively to 34.14 postoperatively The osseointegration was 83% according to Moore's classification. There were two reoperations; one was for instability, and one for aseptic loosening. One patient has a chronic infection and one had a periprosthetic fracture, both treated conservatively. Despite challenges faced with severe preoperative acetabular defects the early results using this technique in Grade III A and B is encouraging.
There is much current debate concerning wear and corrosion at the taper junctions of large head total hip replacements, particularly metal-on-metal hips. Is such damage a modern concern or has it always occurred in total hip replacement but not previously noted. To investigate this five explanted V40 Exeter femoral stems (Stryker Howmedica) were obtained following revision surgery at a single centre. In all cases, the 24–26 mm femoral heads were still attached. In conventional ‘small head’ modular hip prostheses such as the Exeter, negligible wear and corrosion is seen at the taper junction of explanted devices.Introduction
Hypothesis
The decision to choose CR (cruciate retaining) insert or CS (condylar stabilized) insert during TKA remains a controversial issue. Triathlon CS type has a condylar stabilized insert with an increased anterior lip that can be used in cases where the PCL is sacrificed but a PS insert is not used. The difference of the knee kinematics remains unclear. This study measured knee kinematics of deep knee flexion under load in two insert designs using 2D/3D registration technique. Five fresh-frozen cadaver lower extremity specimens were surgically implanted with Triathlon CR components (Stryker Orthopedics, Mahwah, NJ). CR insert with retaining posterior cruciate ligament were measured firstly, and then CS insert after sacrificing posterior cruciate ligament were measured. Under fluoroscopic surveillance, the knees were mounted in a dynamic quadriceps-driven closed-kinetic chain knee simulator based on the Oxford knee rig design. The data of every 10° knee flexion between 0° and 140° were corrected. Femorotibial motion including tibial polyethylene insert were analyzed using 2D/3D registration technique, which uses computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components from single-view fluoroscopic images. We evaluated the knee flexion angle, femoral axial rotation, and anteroposterior translation of contact points.Background
Materials and methods
Femoroacetabular impingement (FAI) is a significant cause of osteoarthritis in young active individuals but the pathophysiology remains unclear. Increasing mechanistic studies point toward an inflammatory component in OA. This study aimed to characterise inflammatory cell subtypes in FAI by exploring the phenotype and quantification of inflammatory cells in FAI versus OA samples. Ten samples of labrum were obtained from patients with FAI (confirmed pathology) during open osteochondroplasty or hip arthroscopy. Control samples of labrum were collected from five patients with osteoarthritis undergoing total hip arthroplasty. Labral biopsies were evaluated immunohistochemically by quantifying the presence of macrophages (CD68 and CD202), T cells (CD3), mast cells (mast cell tryptase) and vascular endothelium (CD34). Labral biopsies obtained from patients with FAI exhibited significantly greater macrophage, mast cell and vascular endothelium expression compared to control samples. The most significant difference was noted in macrophage expression (p<0.01). Further sub typing of macrophages in FAI using CD202 tissue marker revealed and M2 phenotype suggesting that these cells are involved in a regenerate versus a degenerate process. There was a modest but significant correlation between mast cells and CD34 expression (r=0.4, p<0.05) in FAI samples. We provide evidence for an inflammatory cell infiltrate in femoroacetabular impingement. In particular, we demonstrate significant infiltration of mast cells and macrophages suggesting a role for innate immune pathways in the events that mediate hip impingement. Further mechanistic studies to evaluate the net contribution and hence therapeutic utility of these cellular lineages and their downstream processes may reveal novel therapeutic approaches to the management of early hip impingement.
It is well known that total knee arthroplasty (TKA) does not preserve normal knee kinematics. This outcome has been attributed to alteration of soft-tissue balance and differences between the geometry of the implant design and the normal articular surfaces. Bicompartmental knee arthroplasty (BKA) has been developed to replace the medial and anterior compartments, while preserving the lateral compartment, the anterior cruciate ligament (ACL), and the posterior cruciate ligament (PCL). In a previous study, we reported that unicompartmental knee arthroplasty did not significantly change knee kinematics and attributed that finding to a combination of preservation of soft-tissue balance and minimal alteration of joint articular geometry (Patil, JBJS, 2007). In the present study, we analyzed the effect of replacing trochlear surface in addition to the medial compartment by implanting cadaver knees with a bicompartmental arthroplasty design. Our hypothesis was that kinematics after BCKA will more closely replicate normal kinematics than kinematics after TKA. Eight human cadaveric knees underwent kinematic analysis with a surgical navigation system. Each knee was evaluated in its normal intact state, then after BKA with the Deuce design (Smith & Nephew, Memphis, TN), then after ACL sacrifice, and finally after implanting a PCL-retaining TKA (Legion, Smith & Nephew). Knees were tested on the Oxford knee rig, which simulates a quadriceps-driven dynamic deep knee bend. Tibiofemoral rollback and rotation and patellofemoral shift and tilt were recorded for each condition and compared using repeated measures ANOVA for significance.Introduction
Methods
Hemiarthroplasty of the hip involves the replacement of the femoral side of the joint with a metal prosthesis, resulting in metal-on-cartilage articulation. The two most common types of hemiarthroplasty used are the Austin Moore and the Thomson, both of which are available in either Titanium (Ti) or cobalt chromium (CoCr). Hemiarthroplasty may be more cost effective in elderly patients who have lower life expectancy and are less active. Three Ti and two CoCr hemiarthroplasty components were obtained following revision surgery. Four had an articulating diameter of 44mm and the other was 46mm diameter. These five hemiarthroplasties were analysed using a Mitutoyo LEGEX322 co-ordinate measuring machine (CMM) (manufacturer's claimed scanning accuracy of 0.8μm). In each case a wear map was generated and the wear volume from the articulating surface was calculated using a bespoke MATLAB program.Background
Materials and Methods
This case series highlights the use of the Ganz approach (trochanteric slide approach) and surgical dislocation for excision of fibrous dysplasia of the femoral neck, pigmented villonodular synovitis and synovial chondromatosis of the hip. The first patient was a 16-year-old girl, who presented with pain in her hip, having fallen whilst playing football. Investigations revealed a fibrous dysplasia, which was successfully excised returning her to an active lifestyle. The second patient was a 27-year-old lady, who presented having suffered left hip pain for four years. She was diagnosed with a pigmented villonodular synovitis, which was excised and the patient was able to return to the gym. The third patient was a 41-year-old lady, who presented after experiencing right hip pain both at night and at rest for a year, without any trauma. She was diagnosed with synovial chondromatosis and returned to all activities of daily living. The Ganz approach allows safe dislocation of the hip joint without the risk of osteonecrosis of the femoral head. We demonstrate that it is possible to obtain excellent exposure of the femoral neck, head and acetabulum to surgically treat these three tumours of the hip. The surgeon can thus be reassured that complete excision of the tumour has occurred. This series can recommend the Ganz approach with trochanteric slide and full surgical dislocation of the hip to excise pigmented villonodular synovitis, synovial chondromatosis and fibrous dysplasia of the hip.
Aligning the tibial tray is a critical step in total knee arthroplasty (TKA). Malalignment, (especially in varus) has been associated with failure and revision surgery. While the link between varus malalignment and failure has been attributed to increased medial compartmental loading and generation of shear stress, quantitative biomechanical evidence to directly support this mechanism is incomplete. We therefore constructed and validated a finite element model of knee arthroplasty to test the hypothesis that varus malalignment of the tibial tray would increase the risk of tray subsidence.Introduction
Methods
This case series highlights the use of the Ganz approach and surgical dislocation for excision of fibrous dysplasia of the femoral neck, pigmented villonodular synovitis and synovial chrondromatosis of the hip, which has never been described for use with all three tumours together. These are rare benign tumours, which were found incidentally and required excision. We demonstrate that it is possible to obtain excellent exposure of the femoral neck, head and acetabulum allowing easy inspection, exploration and debridement of these three tumours of the hip.
Hip resurfacing has generally been used in younger patients with early osteoarthritis of the hip. There has been considerable recent interest in this over the past few years. We conducted a prospective randomised trial comparing 2 hip resurfacing implants, Durom and ASR looking at radiological and clinical outcomes. Forty-nine patients (78% male) with hip osteoarthritis which met the criteria for hip resurfacing were randomised to receive either a Durom or ASR resurfacing implant. These patients have so far been followed up for a minimum of one year. The groups were comparable in age (p=0.124) and gender (p=0.675). The average age in the ASR group was 54.04 years and in the Durom group it was 51.25. Radiological views were scrutinised immediately post op and at final follow up so far to look at cup inclination, stem-shaft angle, and acetabular osseointegration. Clinical outcomes were compared using the Oxford hip scores, WOMAC scores and SF12 scores. At minimum follow up of 1 year the mean post operative Oxford hip score was not significantly different between the Durom (45.32, SD 3.93) and ASR (43.44, SD 8.44). The mean post operative WOMAC score was also not significantly different between the Durom (52.56, SD 6.06) and ASR (49.63, SD 2.23). There was no difference between the groups with regards to signs of osseointegration from radiological assessment (p=0.368). There were 3 periprosthetic femoral neck fractures (5.7%) and one revision for pain. We conclude from this trial that there is no difference in the clinical or radiological findings between the Durom and ASR implants.
While in vivo kinematics and forces in the knee have been studied extensively, these are typically measured during controlled activities conducted in an artificial laboratory environment and often do not reflect the natural day-to-day activities of typical patients. We have developed a novel algorithm that together with our electronic tibial component provide unsupervised simultaneous dynamic 3-D kinematics and forces in patients. An inverse finite element approach was used to compute knee kinematics from in vivo measured knee forces. In vitro pilot testing indicated that the accuracy of the algorithm was acceptable for all degrees of freedom except knee flexion angle. We therefore mounted an electrogoniometer on a knee sleeve to monitor knee flexion while simultaneously recording knee forces. A finite element model was constructed for each subject. The femur was flexed using the measured knee flexion angle and brought into contact with the fixed tibial insert using the three-component contact force vector applied as boundary conditions to the femoral component, which was free to translate in all directions. The relative femorotibial adduction-abduction and axial rotation were varied using an optimization program (iSIGHT, Simulia, Providence, RI) to minimize the difference between the resultant moments output by the model and the experimentally measured moments. Maximum absolute error was less than 1 mm in anteroposterior and mediolateral translation and was 1.2° for axial rotation and varus-valgus angulation. This accuracy is comparable to that reported for fluoroscopically measured kinematics. We miniaturized the external hardware and developed a wearable data acquisition system to monitor knee forces and kinematics outside the laboratory.Background
Methods
The outcome of periacetabular osteotomy in dysplastic hips is dependent on the absence of preoperative osteoarthritis [OA]. The purpose of this study was to analyze whether Tonnis grading is a reliable predictor of OA in patients with hip dysplasia. Thirty patients were identified who had undergone hip arthroscopy surgery to assess their suitability for periacetabular osteotomy. Radiographs were assessed for anterior centre edge angle, lateral centre edge angle, Tonnis angle and Tonnis grade for OA changes. The radiographic grading of OA was compared with arthroscopic findings. The average age at the time of arthroscopy was 34.97 [16 – 53yrs] (28 females). Tonnis grade did not correlate with arthroscopic findings (p=0.082). There was a trend for patients with a higher Tonnis grade to have more OA changes. Of the 30 patients, all 3 with grade 0 were fit for periacetabular osteotomy, while only 8 out of 24 with grade I, and 1 out of 3 with grade II were fit for periacetabular osteotomy. This study reports that even when radiographic grading showed minimal OA changes, arthroscopy findings indicated significant OA changes. Hence radiographic grading is a poor indicator of OA and other diagnostic modality should be sought before proceeding with joint preserving surgery in this highly selected subgroup of dysplastic hips.Results
The objective was to compare vastus lateralis muscle splitting verses muscle sparing surgical approach to proximal femur for fixation of intertrochanteric fracture. Of the 16 patients in this prospective randomised double blind study 8 were randomised to vastus lateralis muscle splitting and rest to muscle sparing group. Main outcome measurement was assessment of status of vastus lateralis muscle at 2 and 6 weeks using nerve conduction study. Preoperative demographics were identical for both the groups. There was no statistically significant difference between the groups with regards to velocity, latency, and amplitude. The postoperative haemoglobin drop, heamatocrit, position of the dynamic hip screw and mobility status were identical. Both clinical and neurophysiological outcome suggest that damage done to vastus lateralis either by splitting or elevating appears to be identical.
The diagnosis and treatment of hip disease in young adults has rapidly evolved over the past ten years. Despite the advancements of improved diagnostic skills and refinement of surgical techniques, the psychosocial impact hip disease has on the young adult has not yet been elucidated. This observational study aimed to characterise the functional and psychosocial characteristics of a group of patients from our young hip clinic. 49 patients responded to a postal questionnaire which included the Oswestry Disability Index (ODI) and Hospital Anxiety and Depression Scale (HADS). Median age was 20 years (range 16-38) with a gender ratio of 2:1 (female: male). The most common diagnoses were Perthes' disease and developmental hip dysplasia. More than half of our patients had moderate to severe pain based on the Visual Analogue Scale (VAS) and at least a moderate disability based on the ODI. Thirty-two percent of patients were classified as having borderline to abnormal levels of depression and 49% of patients were classified as having borderline to abnormal levels of anxiety based on the HADS. Comparison of the ODI with the VAS and HADS anxiety and depression subscales showed a significant positive correlation (p<0.05). Multiple regression showed the ODI to be a significant predictor of the HADS anxiety and depression scores (regression coefficient 0.13, 95% confidence interval 0.06 to 0.21, p<0.05). This study highlights the previously unrecognised psychosocial effects of hip disease in the young adult. A questionnaire which includes HADS may be of particular value in screening for depression and anxiety in young people with physical illness. This study also highlights that collaboration with psychologists and other health care providers may be required to achieve a multidisciplinary approach in managing these patients.
Stable ankle fractures can be successfully treated non-operatively with a below knee plaster cast. In some European centres it is standard practice to administer thromboprophylaxis, in the form of low molecular weight heparin, to these patients in order to reduce the risk of deep venous thrombosis (DVT). The aim of our study was to assess the incidence of DVT in such patients in the absence of any thromboprophylaxis. We designed a prospective study, which was approved by the local ethics committee. We included 100 consecutive patients with ankle fractures treated in a below knee plaster cast. At the time of plaster removal (6 weeks), patients were examined for signs of DVT. A colour doppler duplex ultrasound scan was then performed by one of the two experienced musculoskeletal ultrasound technicians. We found that 5 patients developed a DVT. Two of these were above knee, involving the superficial femoral vein and popliteal vein respectively. The other three were below knee. None of the patients had any clinical symptoms or signs of DVT. None of the patients developed pulmonary embolism. Of these five patients, four had some predisposing factors for DVT. The annual incidence of DVT in the normal population is about 0.1%. This can increase to about 4.5% by the age of 75. DVT following hip and knee replacement can occur in 40-80% of cases. Routine thromboprophylaxis may be justified in these patients. However, with a low incidence of 5% following ankle fractures treated in a cast, we believe that routine thromboprophylaxis is not justified.
Despite advances in surgical technique and prosthetics there continues to be a number of patients who are dissatisfied with the results of their knee replacement procedure. The outcome after total knee arthroplasty (TKA) has been reported frequently with use of condition-specific measures, but patient satisfaction has not been well studied. 160 patients who received primary total knee arthroplasty (TKA) were evaluated prospectively to evaluate factors that may be associated with patient satisfaction. At minimum one year follow-up all patients were evaluated and completed validated self-report satisfaction questionnaires. Patient, surgeon, implant and process of care variables were assessed along with WOMAC, Oxford Knee and SF-12 scores. Univariate and multivariate analyses were performed to assess for independent factors associated with post-operative satisfaction.Introduction
Material and methods
We reviewed 78 femoral and tibial non-unions treated between January 1992 and December 2003. Of these, we classified 41 as complex non-unions, because of infection (22), bone loss or prior failed surgery to produce union. These were treated with Ilizarov frames. 39 of the 41 nonunions healed successfully at a median time of 11 months. Using the ASAMI scoring system, we had 17 excellent, 14 good, 4 fair and 6 poor bone results. The functional results were excellent in 14, good in 14, fair in 2 and poor in 2. All but 2 patients were extremely satisfied with the results. The average cost of treatment to the treating hospital was approximately £30,000 per patient. In comparison the cost for a patient with a below-knee amputation was £999 per year. This would amount to a cost of £36,000 per patient in their lifetime. There is therefore not a great difference between the cost of limb salvage and amputation. The difference that exists favours limb salvage, if patient selection can accurately predict the salvage of a useful limb. Early referral to tertiary centres would reduce the morbidity and the prolonged time off work. The results justify the expense but the NHS needs to make financial provision for reconstruction of complex nonunions.
Routinely in TKA, at least one of the cruciate ligaments are sacrificed. The cruciate ligaments excision may have an impact in the stability of the reconstructed knee by virtue of the impact on the gap kinematics. In this study, a selective cutting protocol was designed to quantify the individual contribution of ACL and PCL about the knee by means of a loaded cadaveric model. Five fresh frozen normal cadaver specimens were used. The femur was fixed to a specially designed machine, and 3D tibial movements relative to the femur and joint gap distances were measured by means of a navigation system from full extension to 140° flexion. The joint was distracted with 10 pounds. The measurement was performed before and after ACL and PCL excision. Medial gap distance at 90° flexion before and after cruciate ligaments excision was 4.3 ± 2.7 mm (mean ± SD) and 5.1 ± 2.8 mm (p<
0.05) respectively. Cruciate ligaments excision significantly widened the medial and lateral gaps at many flexion angles, and the effect of excision on the gap distance was different between medial and lateral sides especially at 90° knee flexion. Cruciate ligaments excision also significantly influenced knee kinematics. If this varying gap is not accounted for either through implant shape and orientation or through soft tissue adjustments, instability could be the result. Surgeons should be made aware of the influence of cruciate excision on varus/valgus laxity throughout the range of motion. Design modification of the femoral component may also be necessary in order to obtain optimal stability in deep flexion.
Total knee arthroplasty (TKA) provides relatively pain-free function for patients with end-stage arthritis. However, return to recreational and athletic activities is often restricted based on the potential for long-term wear and damage to the prosthetic components. Advice regarding safe and unsafe activities is typically based on the individual surgeon’s subjective bias. We measured knee forces in vivo during downhill skiing to develop a more scientific rationale for advice on post-TKA activities A TKA patient with the tibial tray instrumented to measure tibial forces was studied at two years postoperatively. Tibial forces were measured for the various phases of downhill skiing on slopes ranging in difficulty from green to black. Walking on skis to get to the ski lift generated peak forces of 2.1 ± 0.20 xBW (times body weight), cruising on gentle slopes 1.5 ± 0.22 xBW, skating on a flat slope 3.9 ± 0.50 xBW, snowplowing 1.7 ± 0.20 xBW, and coming to a stop 3 ± 0.12 xBW. Carving on steeper slopes generated substantially higher forces: blue slopes (range 6° to 10°), 4.4 ± 0.18 xBW; black slopes (range 15° to 20°), 4.9 ± 0.57 xBW. These forces were compared to peak forces generated by the same patient during level walking: 2.6 ± 0.4 xBW, stationary biking 1.3 ± 0.7 xBW, stair climbing 3.1 ± 0.31 xBW, and jogging 4.3 ± 0.8 xBW. The forces generated on the knee during recreational skiing vary with activity and level of difficulty. Snow-plowing and cruising on gentle slopes generated lower forces than level walking (comparable to stationary biking). Stopping and skating generated forces comparable to stair climbing. Carving on steeper slopes (blues and blacks) generated forces as high as those seen during jogging. This study provides quantitative results to assist the surgeon in advising the patient regarding postoperative exercise.
The ideal acetabular component is characterised by reliable, long-term fixation with physiological loading of bone and a low rate of wear. Trabecular metal is a porous construct of tantalum which promotes bony ingrowth, has a modulus of elasticity similar to that of cancellous bone, and should be an excellent material for fixation. Between 2004 and 2006, 55 patients were randomised to receive either a cemented polyethylene or a monobloc trabecular metal acetabular component with a polyethylene articular surface. We measured the peri-prosthetic bone density around the acetabular components for up to two years using dual-energy x-ray absorptiometry. We found evidence that the cemented acetabular component loaded the acetabular bone centromedially whereas the trabecular metal monobloc loaded the lateral rim and behaved like a hemispherical rigid metal component with regard to loading of the acetabular bone. We suspect that this was due to the peripheral titanium rim used for the mechanism of insertion.
Infection following hip arthroplasty although uncommon can have devastating outcomes. Obesity, defined as a BMI of ≥ 30, is a risk factor for infection in this population. Coagulase negative staphylococcus aureus (CNS) is the commonest causative organism isolated from infected arthroplasties. This study was performed to determine if there has been a change in the causative organisms isolated from infected hip arthroplasties and to see if there is a difference in obese patients. Data on all deep infection following primary and revision hips was obtained from the surgical site infection register from April 1998 to Nov 2007. Case notes were reviewed retrospectively. There were 49 patients with 51 infected arthroplasties; 25 infected Primary THAs and 26 infected Revision THAs. We found a female preponderance in the infected primary and revision THAs (n=30). 63.2% of all patients had a BMI of ≥ 30, compared to only 34.7% of the non infected population (p<
0.0001). Over the period studied, CNS was the most common organism isolated (56.8%) followed by mixed organisms (37.2%) and staphylococcus aureus (25.4%). Multiple organisms were found exclusively in obese patients. In more than half of cases the causative organisms were resistant to more than two antibiotics. This study shows that over the last 10 years, CNS continues to be the most frequently isolated organism in infected hip arthroplasties. Multiple organisms with multiple antibiotic resistances are common in obese patients. On this basis we recommend that combination antibiotic therapy should be considered in obese patients.
Idiopathic anterior knee pain (AKP) is common in adolescents and young adults. Most believe that the origin of the problem lies in the patello-femoral joint. Hamstring tightness has also been attributed as an important cause. The aim of our study was to compare biometric parameters in patients with idiopathic AKP and controls. We also wanted to assess whether there was a difference in the relative electromyographic (EMG) onset times of the medial and lateral hamstrings. We prospectively recruited patients with idiopathic anterior knee pain in the age group 11 to 25. Patients, but not the control population, had AP, lateral and skyline radiographs taken to rule out other pathology. We had 34 patients (60 knees) with a minimum one year follow up. There was no difference in the symptoms of patients who attended physiotherapy as compared to those who did not. Patients with knee pain had significantly more hip external rotation (63 deg) as compared to the control (47 deg) group (p=0.001). Patients also had significantly more hamstring tightness (p=0.04). Surface EMG was recorded (17 patients and controls each) from the medial and lateral hamstrings during 3 repetitions of a maximal voluntary isometric contraction exercise with the knee at 45° of flexion. The lateral hamstrings contracted 48.7 m.sec earlier than the medial hamstrings in patients as compared to controls. AKP is a multifactorial and self-limiting disorder. Earlier contraction of the lateral hamstrings may cause tibial external rotation and contribute to the symptoms. Our data suggests that physiotherapy did not significantly alter the course of the condition. We believe that increased hip external rotation may contribute to the symptoms by increasing medial facet stress.
We found no significant difference between the groups in the EMG intensity of vastus lateralis relative to biceps femoris, or vastus medialis relative to vastus lateralis, during the balance test or during the step up task (Mann Whitney U test all p>
0.05). We did not find any difference in the proprioceptive abilities of the two groups
The fractures were loaded using a Lloyd’s machine and a load displacement curve was plotted.
Non-osteoporotic model. The mean force requires to produce the same depression was 1878.2N with the 2-screw construct and 1938.2N with the 4 screw construct (p=0.42). An increased fragmentation of the synthetic bone fragments was noticed with the 2-screw construct but not with the 4-screw construct.
The aim of this study was to determine whether there is a difference in the functional outcome between fixed and mobile bearings in total knee arthroplasty. 120 patients were randomized (computer generated) to receive either a fixed or mobile bearing P.F.C. Sigma total knee replacement. 96 patients were needed to detect a 20° difference in range of motion (ROM) with a significance level of 0.05 and a test power of 0.97. Oxford knee score (OKS) and ROM were assessed independently before and one year after surgery. Mean ROM and Oxford knee score before and at one year after surgery for both groups are shown as preliminary results for 70 patients (follow-up expected to be completed by March 2006): There is no statistically significant difference in the mean ROM at one year and in change in ROM between the two groups (p=0.53 and p=0.21 respectively). The findings were similar for Oxford Knee Score at one year and change in Oxford Knee Score (p=0.45 and p=0.82). There was no early aseptic loosening in either group. The one year results suggest that there is no significant difference in functional outcome measured as ROM and Oxford Knee Score between the two types of bearing. Further follow-up will be carried out to detect any differences in the long term outcome.
Introduction and aims: There is a recent trend of using a raft of small diameter 3.5 mm cortical screws instead of the large diameter 6.5mm screws in depressed tibial plateau fractures (Schatzker type 3). Our aim was to compare the biomechanical properties of these two constructs in the normal and osteoporotic sawbone model.
The models were loaded to failure using a Lloyd’s machine. A displacement (depression) of 5mm was taken to be the point of failure. A load displacement curve was plotted using Nexygen software and the force needed to cause a depression of 5mm was calculated in each block. Mann Whitney U test was used for statistical analysis.
The mean force needed to produce a depression of 5mm was 700.8N with the 4-screw construct and 512.4N with the 2 screw construct. This difference was statistically significant (p=0.007). Non-osteoporotic model The mean force requires to produce the same depression was 1878.2N with the 2-screw construct and 1938.2N with the 4 screw construct. The difference was not statistically significant (p=0.42). An increased fragmentation of the sawbone fragments was noticed with the 2-screw construct but not with the 4-screw construct.
Femoral head deformity with flattening and lateral protrusion can occur secondary to epiphyseal dysplasia or avascular necrosis of any aetiology in childhood. This causes painful impingement of the lateral femoral head on the acetabular lip, a phenomenon known as hinge abduction. We aimed to review our experience of valgus extension osteotomy in the treatment of hinge abduction in children and young adults with avascular necrosis. Twenty patients undergoing valgus osteotomy for hinge abduction performed by a single specialist were clinically and radiologically reviewed. The aetiology was Perthes disease in 16 patients and treatment of DDH in 4 patients. The indication for the procedure was pain and limited abduction. The mean follow-up was 4.5 years. Patients were assessed using modified Iowa hip scores at final follow-up. The procedure corrected some leg shortening and improved the abduction range of the affected hip. Overall 80 % of patients did well. The mean Iowa hip score in Perthes group was 84 at final follow-up. Four patients preoperatively had cysts/ defects in their femoral head. These were seen to fill up during their postoperative follow-up. Poorer outcome was associated with preoperative hip stiffness and surgery before stabilisation of the avascular process.
Complications after total knee arthroplasty (TKR) such as malalignment, instability, subluxation, excessive wear, and loosening have been attributed to poor soft-tissue balance. Traditional approaches for soft-tissue balance involve static measurements in full extension and at 90° flexion. A trial prosthesis instrumented with force transducers was used to measure soft-tissue balance through the entire range of flexion. The trial prosthesis was instrumented with four force transducers, one at each corner of the tibial tray, and was implanted in four cadaver knees and four patients intra-operatively. Tibial forces were recorded during passive knee flexion after the tibial and femoral bone cuts were made and again after soft-tissue balance was achieved using standard techniques. In all eight knees measurable imbalance was initially recorded. The differences in forces were a mean of 18 N (range, 6 to 72) mediolateral and a mean of 26 N (range, 13 to 108) anteroposterior. After a routine procedure of soft-tissue balancing, the mean imbalance between the transducers was reduced by 62 % to 87 % (p <
0.05). However, even the knees that appeared perfectly balanced at 0° and 90° flexion, some imbalance occurred [mean 22 N (range, 2 to 34)] at flexion angles other than 0° and 90°. Soft-tissue balance in TKR remains a complex concept. Even after accurate static balancing was achieved in extension and 90° flexion, dynamic measurements revealed discrepancies in mid flexion, which may explain the wide variation in knee kinematics reported after TKR and in the reported incidences of mid-flexion knee instability. Computer-aided surgical navigation systems can increase the precision and accuracy of component alignment. However, these systems cannot directly address soft-tissue balance and knee tightness. An instrumented tibial prosthesis could be a useful adjunct to enhance the value of these navigation tools.
The knee is a complex joint that is difficult to model accurately. Although significant advances have been made in mathematical modeling, these have yet to be validated successfully in vivo. Direct measurement of knee forces should lead to a better understanding of the stresses seen in total knee arthroplasty. An instrumented knee prosthesis was developed to measure forces in vivo after total knee arthroplasty. An instrumented tibial prosthesis was implanted in an 80-year-old male weighing 66 kg. The prosthesis measured forces at the four corners of the tibial tray. The patient walked approximately 1.6million steps per year before surgery (ankle accelerometer measurements). Knee forces were measured postoperatively during passive and active knee flexion, rehabilitation, rising from a chair, standing, walking, and climbing stairs. The patient was walking with the help of a walker by postoperative day 3. Peak tibial forces were 1.2 times body weight (BW). By the sixth postoperative day the tibial forces during gait were 1.7 times BW. At six weeks the peak tibial forces during walking had risen to 2.4time BW. Stair climbing increased from 1.9 times BW on day 6 to 3.3 times BW at six weeks. This represents the first direct in vivo measurement of tibial forces. In vivo tibiofemoral force data will be used to develop better biomechanical knee models and in vitro wear tests and will be used to evaluate the effect of improvements in implant design and bearing surfaces, rehabilitation protocols, and orthotics. This should lead to refining surgical techniques and to enhancing prosthetic designs that will improve function, quality of life, and longevity of total knee arthroplasty. This information is vital given the current trend in the increase of older population groups that are at higher risk for chronic musculoskeletal disorders.
Stable fractures of the ankle can be successfully treated non-operatively by a below-knee plaster cast. In some centres, patients with this injury are routinely administered low-molecular-weight heparin, to reduce the risk of deep-vein thrombosis (DVT). We have assessed the incidence of DVT in 100 patients in the absence of any thromboprophylaxis. A colour Doppler duplex ultrasound scan was done at the time of the removal of the cast. Five patients did develop DVT, though none had clinical signs suggestive of it. One case involved the femoral and another the popliteal vein. No patient developed pulmonary embolism. As the incidence of DVT after ankle fractures is low, we do not recommend routine thromboprophylaxis.
This study explored the relationship between the initial stability of the femoral component and penetration of cement into the graft bed following impaction allografting. Impaction allografting was carried out in human cadaveric femurs. In one group the cement was pressurised conventionally but in the other it was not pressurised. Migration and micromotion of the implant were measured under simulated walking loads. The specimens were then cross-sectioned and penetration of the cement measured. Around the distal half of the implant we found approximately 70% and 40% of contact of the cement with the endosteum in the pressure and no-pressure groups, respectively. The distal migration/micromotion, and valgus/varus migration were significantly higher in the no-pressure group than in that subjected to pressure. These motion components correlated negatively with the mean area of cement and its contact with the endosteum. The presence of cement at the endosteum appears to play an important role in the initial stability of the implant following impaction allografting.
We reviewed 78 femoral and tibial nonunions treated between January 1992 and December 2003. Of these, we classified 41 in 40 patients as complex cases because of infection (22), bone loss (6) or failed previous surgery (13). The complex cases were all treated with Ilizarov frames. At a mean time of 14.1 months (4 to 38), 39 had healed successfully. Using the Association for the Study and Application of the Methods of Ilizarov scoring system we obtained 17 excellent, 14 good, four fair and six poor bone results. The functional results were excellent in 14 patients, good in 14, fair in two and poor in two. A total of six patients were lost to follow-up and two had amputations so were not evaluated for final functional assessment. All but two patients were very satisfied with the results. The average cost of treatment to the treating hospital was approximately £30 000 per patient. We suggest that early referral to a tertiary centre could reduce the morbidity and prolonged time off work for these patients. The results justify the expense, but the National Health Service needs to make financial provision for the reconstruction of this type of complex nonunion.
This study measured polyethylene wear and correlated it with design features such as tibiofemoral conformity and contact areas. Two femoral component designs were tested in a knee wear simulator. The femoral condyles of design A were flat-on-flat in the coronal plane, while those of design B were curved-on-curved. These femoral components were tested with two inserts. Insert PLI had a posterior lip, while insert C had a more curved sagital geometry, to improve stability in the anteroposterior direction. All components were tested for up to five million cycles in bovine serum lubricant. Triaxial forces were monitored to ensure that loading conditions were similar in all combinations tested. Gravimetric wear measurements were made at 500 000 cycle intervals. Contact stresses were measured using pressure sensitive film and dynamic finite element analysis. Contact stresses were 22% higher for inserts tested with design A compared to design B. Sliding distance, sliding velocity, and patterns of crossing motion were found to be comparable between the two femoral designs. Inserts tested with design A wore significantly more (mean 10.9 mg/million cycles) than design B (mean 5.71 mg/million cycles, p <
0.001). No appreciable differences were found between wear rates of insert PLI and insert C. Component design can have a significant impact on polyethylene wear rate. Careful control of kinematic and loading conditions allowed for comparison between specific design features. Increase in tibio-femoral contact area led to reduction of contact stresses, which was reflected in the reduced wear rate.
The purpose of this study was to determine if routine x-ray exposure produced any chemical oxidation of Ultra High Molecular Weight Polyethylene (UHMWPE), used for joint arthroplasty. Three different polyethylene polymers were obtained from Biomet, Depuys and Howmedica. These samples had undergone sterilisation and packaging methods. Rectangular shapes of polymer were cut according to the standards specified by the ASTM (American Society For Testing and Materials). Eight samples of each polymer were obtained and divided randomly in to test and control subgroups. The test samples were exposed to ten x-rays with the standard dose used for the hip joint. Polyethylene oxidation was measured using Fourier transform infrared spectroscopy. This technique can assess the incorporation of oxygen within the carbonyl region. Radiated and non-irradiated samples were compared in each polymer group. Oxidation from the Fourier transform infrared spectroscopy was quantified by calculating the area under a signature absorption peak for UHMWPE (methylene band at 1370 cm-1) and an oxidation absorption peak (carbonyl band at 1720 cm-1). The ratio of the area of the oxidation peak to the area of the signature peak yields the carbonyl content, or oxidation, relative to the amount of polyethylene. There was no significant difference in oxidation after exposure to x-rays between test and control UHMWPE samples. Although numerous studies have looked in to the effects of high dose radiation exposure on polyethylene, effects of routine x-rays have not been studied before. It is common practice to follow-up patients with joint replacements over a long period with xrays at each visit. Present study examined the effects of routine x-rays on oxidation of polyethylene. However there was no detectable oxidation after exposure to x-rays. This study paves way for further research in this direction.
It has been recently suggested that hyponatraemia may be a cause of significant iatrogenic harm in orthopaedic patients. In an attempt to test this theory, this observational study was done to establish the incidence of post-operative hyponatraemia following hip fracture and evaluate its correlation with outcome. An observational study was carried out on 213 consecutive hip fracture patients. 201 patients completed the requirements of the study (Male-45, Female-156). Mean age was 80 years. Serum sodium concentrations were recorded during the first week of admission. Hyponatraemia defined as significant (Na <
130mmol/L) was identified in 9% at admission and 18% during first week of stay. Incidence of severe hyponatraemia was 3%. There were no acute complications of hyponatraemia in these patients. 78% of hyponatraemia patients had received 5% Dextrose infusion during the postoperative period as their main intravenous fluid. All hyponatraemic patients had their sodium levels restored to normal during their stay. Long term outcome measures used were mortality, change in residential status, walking ability and use of walking aids at 4 months following fracture. There was 20% mortality at 4 months in the hyponatraemic group and it was 30% in the normal serum sodium group. However this difference was not statistically significant. Hyponatraemia did not significantly influence deterioration in residential status (p<
0. 05), walking independence (p<
0. 05) or increase of walking aids (p<
0. 05). In hip fracture patients, hyponatraemia whilst common was not associated with a poor outcome and at the same time we did not find any evidence of lapse in the recognition and treatment of hyponatraemia in a general orthopaedic ward. However emphasis should be made to junior medical staff to avoid iatrogenic hyponatraemia by following a proper postoperative fluid regime.
We describe three cases of traumatic myositis ossificans in which fractures occurred through a mature, quiescent ossification mass. None of the fractures reactivated the original pathological process, no callus was formed and union did not occur. The nonunion became painless over a period of months. This unusual late complication of myositis ossificans seems to require only symptomatic treatment by temporary splintage and subsequent mobilisation. We could find no previous report of a similar case.