Most hip replacements are performed in an in-patient setting; however, there has been a shift in recent years in Canada towards doing more on an outpatient basis. In 2021–2022, 15.6% of hip replacements were performed as day surgeries compared to 0.7% in 2018–2019. This analysis will assess patient reported outcome measures of patients who had inpatient versus outpatient hip replacement surgery between 2018 and 2021. We analysed a retrospective sample of 4917 adult patients who had an elective primary unilateral hip replacement. Preoperative and three-month postoperative PROMs were completed - the Oxford Hip Score, EQD5L and patient satisfaction with the outcome were recorded. Patients who had an outpatient procedure were matched 1:1 with patients who are admitted to hospital for surgery based on age, sex and pre-COVID versus the COVID (March 15, 2020 as the start). Preoperative PROMs and Charlson Comorbidity Index were collected. T-tests and chi-square tests were used to assess the differences. The inpatient group on average was older, female and had a lower preoperative PROMs score and more comorbidities than the outpatient group. With cohort matching the sample consisted of 1244 patients. The inpatient and outpatient groups have similar Oxford scores, postoperative EQ-5D-5L scores and the proportion satisfied with their surgical results. The Oxford postoperative score was slightly higher in the outpatient group compared to the inpatient group; however, this is not clinically significant. We observed that outpatient protocols have no difference in patient satisfaction, self-reported functional outcomes and self-reported health-related quality of life three months after a hip replacement. Day surgery protocols represented potential solution to the challenges caused by the expected increase in demand for hip replacements. Our results demonstrated that patients do well clinically with day surgery procedures and there does not appear to be any detrimental effect on PROMs.
We have undertaken a series of clinical trials over the last 20 years to look at different bearing surface combinations in young adults. We continue to follow these patients well beyond the planned duration of the trials and new information is constantly becoming available. The first trial compared ceramic-on-ceramic with ceramic-on-standard-polyethylene. These patients have now been followed for 20 years with significant wear in the polyethylene group but virtually identical revision rates. The second trial ceramic-on-ceramic, cobalt-chrome-on-standard-polyethylene and cobalt-chrome-on-cross-linked-polyethylene. In this group the ceramic-on-ceramic patients have the lowest revision rate; the ceramic-on-polyethylene group demonstrates a lower wear rate than cobalt-chrome-on-polyethylene. The third trial looks at cobalt-chrome versus zirconium on either cross-linked polyethylene or conventional polyethylene. At 10 years there remains no evidence of improved performance from the zirconium surface as compared to cobalt-chrome. The cross-linked polyethylene group is clearly outperforming the conventional polyethylene in terms of wear rate but at 10 years the revision rates remain the same in all groups. Cross liked polyethylene appears to be the major determining factor in prosthetic longevity and appears to be more important than the counter face material.
A randomized trial was designed to compare the outcome of ceramic-on-ceramic with ceramic on conventional polyethylene. These patients have been followed for 15 years. 58 hips in 57 patients under 60 years of age were randomized into one of two groups. Patients were blinded to the type of hip they received. Both groups of patients were treated routinely with prophylactic peri-operative antibiotics and low molecular weight Heparin. All patients were seen at six weeks, three months and annually after surgery. Clinical and radiologic assessment was carried out at each visit. Fifty-eight hips were available for analysis, 28 in the CoP group and 29 patients in the CoC group. Mean age of both groups was less than 45 years. There were seven revisions (16%) among the 58 patients enrolled in the study. In the CoP group four patients underwent revision with head and liner exchange for eccentric polyethylene wear 16 years post-implantation. In the CoC group one patient had a cup revision at 15 years for acute aseptic instability of the acetabulum; two additional patients in the CoC group had femoral head exchange, one for fracture and one for trunnion corrosion. Both occurred 14 years after the index surgery. Functional outcome scores showed no difference between the two groups at 15 years. Radiographically there was a statistically difference in wear between the two groups. This study demonstrates that both ceramic-on-ceramic and ceramic-on-polyethylene produce satisfactory functional results with low revision rates in young patients.
Proximal femur fractures are increasing in prevalence, with femoral neck (FN) and intertrochanteric (IT) fractures representing the majority of these injuries. The salvage procedure for failed open reduction internal fixation (ORIF) is often a conversion to total hip arthroplasty (THA). The use of THA for failed ORIF improves pain and function, however the procedure is more challenging. The aim of this study was to investigate the clinical and radiographic outcomes in patients who have undergone THA after ORIF. This retrospective case-control study compared patients who underwent THA after failed ORIF to a matched cohort undergoing primary THA for non-traumatic osteoarthritis. From 2004 to 2014, 40 patients were identified. The matched cohort was matched for date of operation, age, gender, and type of implant. Preoperative, intraoperative, and postoperative data were collected and statistical analysis was performed. The cohort of patients with a salvage THA included 18 male and 22 female patients with a mean age of 73 years and mean follow up of 3.1 years. Those with failed fixation included 12 IT fractures and 28 FN fractures. The mean time between ORIF and THA was 2.1 years for IT fractures and 8.5 years for FN fractures (p=0.03). The failed fixation group had longer procedures, greater drop in hemoglobin, and greater blood transfusion rate (p<0.05). There was one revision and one dislocation in the failed fixation group with no revisions or dislocations in the primary THA group. Length of admission, medical complications, and functional outcome as assessed with a standardised hip score and were found not to be statistically different between the groups. Salvage THA for failed initial fixation of proximal femur fractures yields comparable clinical results to primary THA with an increased operative time, blood loss, and blood transfusion rate.
Modular total hip arthroplasty (MTHA) stems were introduced in order to provide increased intra-operative flexibility for restoring hip biomechanics, improving stability and potentially reducing revision risk. However, the additional interface at the neck-body junction provides another location for corrosion or mechanical failure of the stem. To delineate the mid term revision risk of MTHA stems, we examined data from the Canadian Joint Replacement Registry (CJRR) at the Canadian Institute for Health Information (CIHI). Kinectiv, Profemur and Rejuvenate modular stems were identified from CJRR records submitted between 2004 and 2014. Revision status was determined by examining the discharge abstract database (DAD) also housed by CIHI, which collects information on all revisions, regardless of whether the procedure was submitted to CJRR. A total of 2446 modular stems were identified with a mean follow up of 4.2 years (range 0 to 10). Their usage peaked in 2012 (the first year of mandatory CJRR form submission for BC, ON and MB), and dropped rapidly thereafter. A total of 155 (6.3%) were revised. This consisted of 5/301 Kinectiv (1.7%), 141/2050 ProFemur (6.9%), and 9/96 Rejuvenate (9.4%) stems. As a group, this falls below the National Institute for Clinical Excellence (NICE) guidelines of 95% survival at 10 years. While MTHA stems were introduced to improve outcomes and reduce revision risk, our findings of a 6.3% revision risk at a mean follow up of 4.2 years does not appear to support this.
One method of femoral head preservation following avascular necrosis (AVN) is core decompression and Tantalum Rod insertion. There is, however, a published failure rate of up to 32% at 4 years. The purpose of the present study was to document the clinical and radiological outcome following Total Hip Arthroplasty (THA) subsequent to failed Tantalum Rod insertion. Twenty-five failed Tantalum Rod insertions subsequently requiring THA were identified from a prospectively updated database. Seventeen patients met minimum 2 year clinical and radiographic follow-up criteria. St. Michael's Hip (SMH) scores were compared to a matched cohort of patients with THA for AVN without prior Tantalum Rod insertion. Postoperative radiographs were reviewed assessing component alignment, linear wear (Dorr & Wan) and presence of tantalum residue within the joint space.Introduction:
Methods:
Implant alignment in knee arthroplasty has been identified as critical factor for a successful outcome. Human error during the registration process for imageless computer navigation knee arthroplasty directly affects component alignment. This cadaveric study aims to define the error in the registration of the landmarks and the resulting error in component alignment. Five fresh frozen cadaveric limbs including the hemipelvis were used for the study. Five surgeons performed the registration process via a medial parapatellar approach five times. In order to identify the gold standard point, the soft tissues were stripped and the registration was repeated by the senior author. Errors are presented as mm or degrees from the gold standard registration. The error range in the registration of the femoral centre in the coronal plane was 6.5mm laterally to 5.0mm medially (mean: −0.1, SD: 2.7). This resulted in a mechanical axis error of 5.2 degrees valgus to 2.9 degrees varus (mean: 0.1, SD: 1.1). In the sagittal plane this error was between −1.8 degrees (extension) and 2.7 degrees (flexion). The error in the calculation of the tibial mechanical axis ranged from −1.0 (valgus) to 2.3 (varus) degrees in the coronal plane and −3.2 degrees of extension to 1.3 degrees of flexion. Finally the error in calculating the transepicondylar axis was −11.2 to 6.3 degrees of internal rotation (mean: −3.2, SD: 3.9). The error in the registration process of the anatomical landmarks can result in significant malalignment of the components. The error range for the mechanical axis of the femur alone can exceed the 3 degree margin that has been previously been associated with implant longevity. The technique during the registration process is of paramount importance for image free computer navigation. Future research should be directed towards simplifying this process and minimizing the effect of human error.
To review prospectively collected data on patients undergoing primary total hip arthroplasty utilizing two different cementless acetabular components. All patients undergoing primary total hip replacement surgery at our institution are entered prospectively into a database which includes history and physical examination, radiology, WOMAC and SF-36 scores. The patients are re-examined, re-x-rayed and re-scored at 3 months, 6 months and 1 year after surgery and yearly thereafter. Using this database we are able to identify patients who have undergone total hip replacement using one of two geometric variants of the acetabular component. The first design is hemispherical and the second design has a peripheral rim expansion designed to increase initial press-fit stability. Five hundred and twenty-seven consecutive primary total hip replacements were identified using either of the geometric variants of the acetabular component. Results at a mean of 7 years revealed a 95.6% survivorship with no significant difference between the two component designs with revision for aseptic loosening as the end point. Functional scores between the two groups of patients also demonstrated no statistically significant difference. Radiologic assessment, however, showed a difference between the two designs. The hemispherical design which matches the reamer line-to-line had 80% complete osseointegration on final radiologic review while the second design with a peripheral rim expansion had only 57% complete osseointegration. This was statistically significant. The peripherally expanded components also had a greater number of screws inserted at the time of surgery, felt by us to be a reflection of initial surgeon dissatisfaction with component stability at the time of insertion of the component. The difference in screw numbers was also statistically significant. This study demonstrates that a hemispherical design with line-to-line contact between the acetabular component surface and the acetabular bone is statistically superior in terms of bone ingrowth and probably statistically superior in terms of initial press-fit stability when compared to a peripherally expanded component. Peripherally expanded components appear to offer no advantage over hemispherical components in terms of clinical outcome and are statistically inferior to hemispherical components in radiologic parameters at 7 years follow-up.
This prospective randomised controlled trial aims to compare the clinical and radiological outcomes of ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces at a minimum of five years. One hundred and two primary total hip replacements were performed in ninety one patients between February 2003 and March 2005. All patients were younger than 65 (mean 52.7, 19–64). They were randomised to receive one of the three bearing surfaces. All patients had 28mm articulations with a Reflection uncemented acetabular component and a Synergy stem (Smith & Nephew, Memphis, Tennessee). Patients were followed up periodically up to at least sixty months following surgery. Outcome measures included WOMAC and SF12 scores. Radiological assessment included implant position, evidence of osteolysis and measurement of linear wear. Ninety seven hip replacements in eighty seven patients were available for review at a minimum of five years. Two hips were revised (one for infection and one for periprosthetic fracture), leaving a total of ninety four hips available for final review. There were no differences in age, gender, body mass index, diagnosis, level of activity, and co-morbidities between the three groups. At a minimum of five years there were no statistical differences in the clinical outcomes using the WOMAC or SF12 scores. Three patients in the ceramic group reported squeaking. Radiological evaluation revealed mean annual wear rates in the ceramic group of 0.006mm/yr, standard polyethylene of 0.151mm/yr and highly cross linked polyethylene of 0.059mm/yr. ANOVA analysis revealed these differences in wear rates to be significant (p<0.0001). In the mid term there are no differences in clinical outcome between ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces in total hip arthroplasty. Ultra high molecular weight polyethylene has a significantly greater annual linear wear rate than highly cross-linked polyethylene.
To review prospectively collected data on patients undergoing primary total hip arthroplasty utilizing two different cementless acetabular components. All patients undergoing primary total hip replacement surgery at our institution are entered prospectively into a database which includes history and physical examination, radiology, WOMAC and SF-36 scores. The patients are re-examined, re-x-rayed and re-scored at 3 months, 6 months and 1 year after surgery and yearly thereafter. Using this database we are able to identify patients who have undergone total hip replacement using one of two geometric variants of the acetabular component. The first design is hemispherical and the second design has a peripheral rim expansion designed to increase initial press-fit stability.Purpose
Materials & Methods
To review prospectively collected data on patients undergoing femoral revision arthroplasty for failed cemented or cementless primary stems. All patients undergoing primary and revision joint replacement surgery at our institution are prospectively entered into a database which includes history and physical examination, radiology, WOMAC and SF-36 scores. These investigations are repeated 3 months, 6 months, 1 year and yearly thereafter at each patient visit. This database identified all patients undergoing femoral revision arthroplasty over the last 10 years. There were a total of 231 patients with 248 revision procedures performed. There were 127 female and 104 male patients and the mean age at the time of revision surgery was 69.4 years. Twenty-two of these patients had had at least one prior revision operation on the index hip. Thirty hips were treated with a cemented Echelon stem and 218 treated with a cementless Echelon stem. Of the 248 hips 14 patients were lost to follow-up (14 hips) and 9 patients (9 hips) are deceased. The average follow-up was 5.9 years. Of the 225 hips remaining in the follow-up series there was a single case of aseptic loosening confirmed radiologically. Twenty-one hips were diagnosed with infection (9.3%); 6 of those patients had had at least one prior revision procedure and 4 additional patients had a prior diagnosis of infection. Therefore, 10 of the 21 hips were either definitely or probably infected at the time of their revision operation on which we are reporting. Nine patients (4%) had multiple dislocations post-operatively. These were patients who had undergone multiple revisions or whose primary revision operation was for instability. An additional 18 patients (8%) had a single dislocation treated by closed reduction requiring no further treatment. There were 6 hips with intra-operative fracture requiring immediate re-revision plus fracture fixation and a further 12 hips (5.3%) who sustained a peri-prosthetic fracture some time after their revision procedure. Despite the number of complications the majority of patients required no further surgical treatment. Eleven hips (4.8%) required re-revision of the femoral component. Therefore the overall survival rate at 5.9 years of the Echelon revision stem was 95.2%.Materials & Methods
Results
This prospective randomised controlled trial aims to compare the clinical and radiological outcomes of ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces at a minimum of five years. One hundred and two primary total hip replacements were performed in ninety one patients between February 2003 and March 2005. All patients were younger than 65 (mean 52.7, 19-64). They were randomised to receive one of the three bearing surfaces. All patients had 28mm articulations with a Reflection uncemented acetabular component and a Synergy stem (Smith & Nephew, Memphis, Tennessee). Patients were followed up periodically up to at least sixty months following surgery. Outcome measures included WOMAC and SF12 scores. Radiological assessment included implant position, evidence of osteolysis and measurement of linear wear.Aim
Methods
We designed this study to determine the clinical evidence to support use of the five degree tibial extra-medullary cutting block over the zero degree cutting block. We identified three groups of patients from the databases and clinical notes at St Michaels Hospital, Toronto. Group one were primary total knees performed using the five degree cutting block, group two were primary total knees performed using the zero degree cutting block and the third group were computer navigated primary total knees. Patients in all three groups were age and sex matched. The senior author advocating use of the five degree block aimed to obtain a five degree posterior slope. The senior author who advocated the use of computer navigation, or the traditional zero degree cutting block, aimed to obtain a three degree posterior slope. All operations were performed by residents or clinical fellows, under the supervision of the senior authors. Patient radiographs were assessed to obtain the optimal direct lateral view obtained and they were saved on a database. Two independent blinded researchers assessed the posterior slope using Siemens Magicweb Software Version VA42C_0206. Two methods were used and the results averaged. The average posterior slope for the navigated total knee replacements was 0.1 degrees (−2 to 4). The average posterior slope for the five degree cutting block was 5.2 degrees (−2 to 16). The average posterior slope for the zero degree block was 3.79 degrees (−2 to 13). Computer navigated knee arthroplasty patients had significantly less variation in outlier measurements compared to the traditionally jigged arthroplasty patients. They were however, less accurate. The five degree cutting block tended to provide a more consistent posterior slope angle, but both the five degree and zero degree cutting blocks had variability in outliers. Computer Navigated Total Knee replacement provides a more consistent and reproducible tibial cut with less variability in alignment than extra-medullary jigs. The traditional five degree cutting block tended to provide a more reliable five degree posterior slope than the zero degree block, but was still subject to outliers.
The aim of this study was to determine the mid-term survival and functional outcomes of the Scorpio Total Stabilised Revision Knee prosthesis. Sixty seven prostheses were implanted between November 2001 and April 2008. 42 females and 23 males. Average patient age was 67.9 (37-89). Outcomes were assessed with WOMAC (Western Ontario and McMaster Universities Osteoarthritis index), Knee Society Scores, Short Form-8 scores, patient satisfaction and radiological review. Average follow-up was over 3 years (8-93mths) with 95% follow-up. One patient died post operatively and 4 patients from 18 months to 5 years post-operatively. Average body mass index was 32.9 (21.5- 55.1). 65% (42 patients) of patients operated on had a Body Mass Index of greater than 30. 48 patients were ASA 3 or greater. Thirteen second stage revision arthroplasties were performed after treatment for infected arthroplasty surgery. Twenty six prostheses were revised for aseptic loosening. Eight prostheses were revised for stiffness and 9 for worn polyethylene inserts. Five prostheses were revised for symptomatic tibio-femoral instability/ dislocation and one for patello-femoral instability. Two revisions were performed for peri-prosthetic fractures and 2 for previously operated tibial plateau fractures. Seven patients required tibial tubercle osteotomy and seven a rectus snip. Thirty one patients had greater than a 15mm polyethylene insert. The average KSS increased from 49 pre-operatively to 64 at 7.5 years. The average KS function score increased from 21 to 45. 68% (44) of patients had other significant joint involvement which affected daily function. 24% of patients were unsatisfied with the outcome. 89.5% of patients radiographs were assessed for loosening or subsidence. 51% of femoral components and 36% of tibial components had radiosclerotic lines. The surface area of each implant including the stem was measured on antero-posterior and lateral images. The degree of lucency was calculated as a percentage and in mm from the component. Two prostheses (3%) were revised for deep infection, one (1.5%) for stiffness and one for aseptic loosening (1.5%). Complications included a popliteal artery injury, two superficial wound infections, and one patella tendon avulsion. Survival rate for revision of prosthesis was 87% at 7.5 years and 90% excluding infection. Success of second stage revision arthroplasty after treatment of infection was 92%.
The purpose of this study was to evaluate 3 methods used to produce posterior tibial slope. 110 total knee arthroplasties performed during a 4 year period were included(2005 to 2009). All operations were performed by 2 surgeons. Group 1 used an extramedullary guide with a 0 degree cutting block tilted by placing 2 fingers between the tibia and the extramedullary guide proximally and three fingers distally to produce a 3 degree posterior slope (N=40). Group 2 used computer navigation to produce a 3 degree posterior slope (N=30). Group 3 used an extramedullary guide placed parallel to the anatomic axis of the tibia with a 5 degree cutting block to produce a 5 degree slope (N=40). Posterior tibial slope was measured by 2 independent blinded reviewers. The reported slope for each sample was the average of these measurements. All statistical calculations were performed using SPSS Windows Version 16.0 (SPSS Inc., IL, USA). There was excellent agreement for the mean posterior slopes measured by the 2 independent reviewers. The linear correlation constant was 0.87 (p<0.01). The paired t test showed no significant difference (p=0.82). The measurements for Group 1 (4.15±3.24 degrees) and Group 2 (1.60±1.62 degrees) were both significantly different to the ideal slope of 3 degrees (p=0.03 for Group 1 and p<0.01 for Group 2). The mean posterior tibial slope of Group 3 (5.00±2.87 degrees) was not significantly different to the ideal posterior tibial slope of 5 degrees (p=1.00). Group 2 exhibited the lowest standard deviation.Methods
Results
The purpose of this study was to evaluate total hip arthroplasty (THA) in the treatment of post-traumatic arthritis following acetabular fracture and to compare the long-term outcome of THA after previous open reduction and internal fixation (ORIF) or conservative treatment of the acetabular fracture. Thirty-four patients (thirty-six hips) underwent total hip arthroplasty for arthritis resulting from acetabular fractures. There were twenty-six males (27 hips) and eight females (9 hips). The mean age at the time of hip arthroplasty was 49 years (range, 25-78 years). The mean follow-up was eight years and nine months (range, 4-17 years). The mean interval from fracture to arthroplasty was 7.5 years (range, 5 months-29 years). Two patients died of unrelated causes and two patients were lost to follow-up. Thirty patients (32 hips) were available for latest follow-up. Twenty-one hips had been previously treated by open reduction internal fixation and 11 hips had conservative treatment. Sixteen patients achieved and maintained a good to excellent result over the course of the follow-up. There was no difference in improvement of mean Harris Hip Score between both groups (p>0.05). Ten out of 32 hips required revision; 9 acetabular components were revised because of aseptic loosening (3), osteolysis/excessive wear (4), instability (1) and infection (1) with a total revision rate of 28%. Eight patients needed acetabular revision alone, one femoral revision alone and one revision of both components. There was no significant difference in bone grafting, heterotopic bone formation, revision rate, operative time and blood loss between the two groups (p> 0.05). Those patients initially treated conservatively had similar long term results compared to those treated primarily by open reduction internal fixation. At long term follow-up the main problem identified was osteolysis and acetabular wear.
We aimed to identify whether patients in lower socioeconomic groups had worse function prior to total knee arthroplasty and to establish whether these patients had worse post-operative outcome following total knee arthroplasty. Data were obtained from the Kinemax outcome study, a prospective observational study of 974 patients undergoing primary total knee arthroplasty for osteoarthritis. The study was undertaken in thirteen centres, four in the United States, six in the United Kingdom, two in Australia and one in Canada. Pre-operative data were collected within six weeks of surgery and patients were followed for two years post-operatively. Pre-operative details of the patient's demographics, socioeconomic status (education and income), height, weight and co-morbid conditions were obtained. The WOMAC and SF-36 scores were also obtained. Multivariate regression was utilised to analyse the association between socioeconomic status and the patient's pre-operative scores and post-operative outcome. During the analysis, we were able to control for variables that have previously been shown to effect pre-operative scores and post-operative outcome. Patients with a lower income had a significantly worse pre-operative WOMAC pain (p=0.021) and function score (p=0.039) than those with higher incomes. However, income did not have a significant impact on outcome except for WOMAC Pain at 12-months (p=0.014). At all the other post-operative assessment times, there was no correlation between income and WOMAC Pain and WOMAC Function. Level of education did not correlate with pre-operative scores or with outcome at any time during follow-up. This study demonstrates that across all four countries, patients with lower incomes appear to have a greater need for total knee arthroplasty. However, level of income and educational status did not appear to affect the final outcome following total knee arthroplasty. Patients with lower incomes appear able to compensate for their worse pre-operative score and obtain similar outcomes post-operatively.
The incidence of cervical spine injuries associated with facial fractures varies from study to study. The presence or absence of a cervical spine injury has important implications in trauma patients, influencing airway management techniques, choice of diagnostic imaging studies, surgical approach and timing for repair of concomitant facial fractures. There is general agreement that immediate management of cervical spine injuries is mandatory to prevent further neurological injury. Nevertheless, disagreement exists as to the actual incidence of cervical spinal trauma in conjunction with various facial fracture patterns. The purpose of this study was to review the incidence of cervical spine injury associated with various upper, middle and lower one-third facial fractures presenting to St. Michael's Hospital Regional Trauma Centre. A retrospective chart review was performed of patients presenting to the Trauma Service at St. Michael's Hospital from 1 January 1993 to 31 December 2003 inclusive. The data from this 10 year time span revealed a total of 124 patients with cervical spine injuries drawn from a cohort of 3,356 patients with craniomaxillofacial fractures. The overall incidence of cervical spine injury was 3.7%. Isolated upper 1/3 facial and skull fractures accounted for 1,711 of the patients and were associated with cervical spine injury in .53% of cases, while isolated middle 1/3 facial fractures were seen in 1,154 patients and were associated with a 1.13% rate of cervical injuries. The largest rate of association for cervical spine injury and isolated fractures was seen with lower 1/3 facial fractures at 1.51%. In contrast, combined facial fracture patterns involving two or more facial thirds accounted for the great majority of cervical spine injuries occurring at an incidence of 7.1%. The implications for trauma assessment, diagnosis and treatment of these injuries are reviewed.
Oxidized Zirconium (Oxinium, Smith &
Nephew, Inc., Memphis, TN) is a relatively new material that features an oxidized ceramic surface chemically bonded to a tough metallic substrate. This material has demonstrated the reduced polyethylene wear characteristics of a ceramic, without the increased risk of implant fracture. The purpose of the current investigation was to assess clinical outcomes following primary total hip arthroplasty with Oxinium versus Cobalt Chrome femoral heads. One hundred uncemented primary total hip arthroplasty procedures were prospectively performed in 100 patients. There were 52 males and 48 females with mean age at the time of surgery of 51 years (SD 11, range, 19–76). Using a process of sealed envelope randomization, patients were divided into 2 groups. Each group contained fifty patients. Those in group 1 received an Oxinium femoral head (OX), while those in group 2 a cobalt-chrome femoral head (CC). The current study reports clinical outcome measures for both the OX and CC groups at a minimum follow-up of 2 years postoperatively. At the time of latest follow-up, stem survival for both groups was 98%. There was a significant improvement in all clinical outcome scores between preoperative and 2 year postoperative time periods for both bearing groups (p<
0.003). There were no significant differences between bearing groups for any of the clinical outcome scores at final follow-up (p>
0.159). Mean Harris Hip Scores at 2 years postoperatively were 92 and 92.5 for OX and CC, respectively (range; 65–100 OX, 60–100 CC). For SF-12, both the Physical Component Summary Scale (PCS) and the Mental Component Summary Scale (MCS) are reported. Mean PCS scores at final follow-up were 45.2 and 49.21 for OX and CC (range; 27.1–56.7 OX, 26.3–61.8 CC). Mean MCS scores were 53.8 and 52.57 for OX and CC (range; 39.2–65.5 OX, 34.3–64 CC). Mean final WOMAC scores are reported as 84.9 and 87 for OX and CC, respectively. The current data suggest that total hip arthroplasty utilizing Oxinium femoral heads is safe and effective. Additional follow-up of the current cohort will be performed in order to fully assess mid-to long-term clinical outcomes.
Posterior slope of the tibial component is an important factor in overall alignment of Total Knee Arthroplasty. The purpose of this study was to compare the accuracy and reproducibility of tibial bone cuts utilizing traditional extramedullary 0 degree and angled 5 degree cutting blocks, and computer aided navigation, in primary total knee arthroplasty. We identified 3 groups of patients. Group one were primary total knees performed using an extramedullary 0 degree cutting block for posterior slope, group 2 were performed using an extramedullary 5 degree cutting block and the third group were performed with computer navigation. Patients in all 3 groups were age and sex matched. All operations were performed by residents or clinical fellows, under the supervision of the senior authors. Lateral digital radiographs were reviewed and posterior slope was determined in a standardized fashion. Two independent blinded researchers assessed the posterior slope using Siemens Magicweb software version VA42C_0206. The average difference from the ideal posterior slope in navigated knees was lower than with non-navigated knees, however this was not significant (p=0.086). The average difference from the ideal posterior slope in computer navigated knees was 1.77 degrees (95% CI=1.28 to 2.26) compared to 2.37 degrees (95% CI=1.56 to 3.17) with the 5 degree cutting block and 2.70 degrees (95% CI=1.73 to 3.66) with the 0 degree block. No absolute significant difference was highlighted between the 3 groups using ANOVA testing (p=0.22). All three techniques used to obtain ideal tibial slope were accurate. Accuracy was not increased by the use of computer navigation; however navigation resulted in less variation in outcome. The two jig based methods produced similar outcomes and either technique can be used successfully.
Minimizing tip-apex distance has been shown to reduce clinical failure of sliding hip screws used to fix peritro-chanteric fractures. The purpose of this study was to determine if such a relationship exists for the position of the lag screw in the femoral head using a cephalomedullary device.
Superior (N=6), Inferior (N=6), Anterior (N=6), Posterior (N=6), Central (N=6). Mechanical tests were repeated for axial, lateral and torsional stiffness. All specimens were radiographed in the anterioposterior and lateral planes and tip-apex (TAD) distance was calculated. A calcar referenced tip-apex distance (CalTAD) was also calculated. ANOVA was used to compare means of the five treatment groups. Linear regression analysis was used to compare axial, lateral and torsional stiffness (dependant variables) to both TAD and CalTAD (independent variables).
The use of metal on polyethylene articulations was a key development in establishing total hip arthroplasty as a successful and reproducible treatment for end stage osteoarthritis. In order to ensure implant durability in relatively younger populations, there is a need for alternative, wear resistant bearing surfaces. Oxidized Zirconium (Oxinium, Smith &
Nephew, Inc., Memphis, TN) is a relatively new material that features an oxidized ceramic surface chemically bonded to a tough metallic substrate. This material has demonstrated the reduced polyethylene wear characteristics of a ceramic, without the increased risk of implant fracture. The purpose of the current investigation was to assess early clinical outcomes following primary total hip arthroplasty with Oxinium versus Cobalt Chrome femoral heads. One-hundred primary THA procedures were prospectively performed in 100 patients. There were 52 males and 48 females. Using a process of sealed envelope randomization, patients were divided into 2 groups. Group 1 consisted of fifty patients, each receiving primary THA implants with an Oxinium femoral head (OX). The mean age of each patient was 51 years (SD 10.8, Range 22–74) with 26 males and 24 females. Group 2 also consisted of 50 patients. Within this group again each patient received primary THA implants however with a cobalt-chrome femoral head (CC). Demographics were similar with mean age 51 years (SD 11.0, Range 19–76) and again 26 males and 24 females. The current study reports clinical outcome measures for both the OX and CC groups at a minimum follow-up of 2 years postoperatively. At the time of latest follow-up, stem survival for both groups was 98%. There was a significant improvement in all clinical outcome scores between preoperative and 2 year postoperative time periods for both bearing groups (p<
0.003). There were no significant differences between bearing groups for any of the clinical outcome scores at final follow-up (p>
0.159). Mean Harris Hip Scores at 2 years postoperatively were 92 and 92.5 for OX and CC, respectively (range; 65–100 OX, 60–100 CC). For SF-12, both the Physical Component Summary Scale (PCS) and the Mental Component Summary Scale (MCS) are reported. Mean PCS scores at final follow-up were 45.2 and 49.21 for OX and CC (range; 27.1–56.7 OX, 26.3–61.8 CC). Mean MCS scores were 53.8 and 52.57 for OX and CC (range; 39.2–65.5 OX, 34.3–64 CC). Mean final WOMAC scores are reported as 84.9 and 87 for OX and CC, respectively. The current data suggest that total hip arthroplasty utilizing Oxinium femoral heads is safe and effective. Additional follow-up of the current cohort will be performed in order to fully assess mid- to long-term clinical outcomes.
Total hip replacement in the young active patient remains one of the major challenges in orthopaedics today. The use of ultra high molecular weight (UHMW) polyethylene acetabular liners is known to cause polyethylene wear related osteolysis, the major limiting factor in its use in the younger active patient. Modern alumina ceramic articulations have been developed in order to reduce wear and avoid polyethylene debris. This prospective randomized long-term study aims to compare the outcome between an alumina ceramic-on-ceramic (CC) articulation with a ceramic on UHMW polyethylene articulation (CP). In the younger active patient, is one option superior to the other with regard to patient satisfaction, osteolysis and implant longevity? 56 hips in 55 patients with mean age 42.2 (range 19–56) each received uncemented components (Wright Medical) and a 28mm alumina head with acetabular liner selected via sealed envelope randomization following anesthetic induction. Subsequent regular clinical and radiologic follow up measured patient outcome scores and noted any radiological changes. 26 CP hips and 30 CC hips were evaluated. One failure required revision in each group. Mean St Michael’s outcome score for each group with up to 10 years follow-up (median 8 years, range 1–10) was 22.8 and 22.9 respectively (p=0.057). Radiographs with a minimum 5 years post-operative follow-up were analyzed in 42 hips (23 CC and 19 CP). Radiolucency of all 3 acetabular zones was identified in one of the CP hips. There was no evidence of osteolysis or loosening identified in the remaining hips. The mean time of wear measurement for the CC group was 8.3 years (SD 1.3, Range 4.8–10.1 years) and for the CP group was 8.1 years (SD 0.9, Range 6.1–9.2 years)(p=0.471). Wear was identified in all but one of the CP replacements but only 12 of 23 CC articulations. The mean wear for the CC group was 0.14 mm (SD 0.16, Range 0–0.48 mm) and for the CP group was 0.89 mm (SD 0.6, Range 0–2.43 mm)(p<
0.001). Extrapolating the annual wear rate from these figures, the respective wear is 0.02mm for the CC group compared to 0.11mm per year for the CP group. To our knowledge this is the first long term randomized trial comparing in vivo ceramic-on-ceramic with ceramic-on-conventional polyethylene hip articulations. Other than significantly greater wear in the polyethylene group there was no significant difference in long-term outcome scores between the two groups with up to 10 years of follow-up. The use of a ceramic-on-ceramic bearing is a safe and durable option in the young patient avoiding the concerns of active metal ions and osteolytic polyethylene debris. These patients remain under review.
The effect of cup geometry in uncemented Total Hip Arthroplasty has not been investigated. We reviewed the radiological and clinical results of 527 primary total hip arthroplasties. We assessed the bone ingrowth potential of two geometric variations of an uncemented cup and compared hydroxyappetite and porous coated shells. Patients undergoing primary hip arthroplasty between 1997 and 2004 were prospectively entered into an arthroplasty database. Patients were reviewed at 1,2,4,5,8 and 10 years post surgery. Three acetabular shell types were used. These included hemispherical cups with porous or hydroxyapatite coating, and cups with peripheral expansion with porous coating. Radiographs with minimum 1-year follow-up were examined in 542 cases, using digital templating software. Radiographs were assessed for signs of bone in-growth, lucent lines, migration and polyethylene wear. Survivorship analysis was performed using Kaplan-Meier analysis with 95% confidence intervals. Radiological findings and cup type were analysed using Fishers exact test. Radiological evidence of bone ingrowth was seen in 82% of hemispherical cups, compared with 59% of peripherally expanded cups, which was significant (p,0.05). Bone ingrowth was not affected by the presence of HA coating. The most common diagnoses were osteoarthritis (67%) and avascular necrosis (12%). The mean age was 56 years. Survivorship with revision or impending revision for aseptic loosening was 95.6% at 7 years (95%CI 1.0134-0.8987). The 3 revisions and 1 impending revision for loosening were in patients with avascular necrosis (3) or previous acetabular and femoral osteotomies for DDH (1), with a mean age of 44 years. Hemispherical shells have improved radiographic outcome in comparison with peripherally expanded components. At 7 years, clinical results are similar for both components.
In perfroming hip resurfacing arthroplasty, concern has been expressed as to the proximity of the femoral neurovascular bundle during the anterior capsulotomy and the risk of damage during this maneuver. We therefore aimed to identify the proximity of the femoral nerve, artery and vein during an anterior capsulotomy done during a hip resurfacing procedure using the posterior approach. A standard posterior approach was performed in 5 fresh frozen cadavic limbs. An anterior incision was then used to measure the distance of the femoral neurovascular structures to the anterior capsule. Measurements from the most posterior aspect of the vessels and nerves to the most anterior aspect of the anterior capsule were taken prior to hip dislocation. The femoral head was then dislocated, and measurements were made with the hip in both flexion and extension. In a separate group of eleven patients that underwent routine MR imaging of the hip, measurements were taken to assess the proximity of the anterior joint capsule to the femoral neurovascular bundle, by a specialist musculoskeletal radiologist who had no prior knowledge of the results obtained during the cadaveric dissection All 5 cadaveric limbs were utilised. 3 were male and 2 were female. The average age was 72.4 years (range 56–84). The patients whom underwent routine MR imaging incorporated 6 males and 5 females with a mean age of 43.7 years (age range 18–64 years). There was no significant difference between the mean distances to the nerve (p=0.21), artery (p=0.21) or vein (p=0.65) between the MR and cadaveric groups. Prior to dislocation the femoral artery and vein were closest to the anterior capsule (mean distance of 21mm) and the femoral nerve was the furthest away (mean distance 25mm). Following dislocation there was a significant increase (25mm to 31mm) in mean distance to the femoral nerve when the superior capsule was cut with the hip in a flexed position (p=0.01) and to the femoral artery in flexion (increase mean distance from 21mm to 35mm) (p<
0.0001) and in extension(increase mean distance from 21mm to 31mm) (p=0.005). When the inferior capsule was cut, there was a significant increase (25mm to 31mm) in mean distance to the femoral nerve and femoral artery when the hip was dislocated and the capsule cut with the hip in flexion (increase mean distance from 21mm to 27mm) (p=0.019) and in extension(increase mean distance from 21mm to 28mm) (p=0.015). This study suggests that the neurovascular structures are relatively well protected during an anterior capsulotomy performed during hip resurfacing. The procedure may be safer if the capsulotomy is performed with the hip dislocated and the hip in a flexed position while cutting the antero-superior aspect and in an extended position while cutting the antero-inferior aspect.
The purpose of this study was to assess the accuracy of clinical assessment compared to imageless computer navigation in determining the amount of fixed flexion during knee arthroplasty. In fourteen cadaver knees, a medial para-patella approach was performed and the navigation anatomy registration process performed. The knees were held in various degrees of flexion with two crossed pins. The degree of flexion was first recorded on the computer and then on lateral radiographs. The cadaver knees were draped as for a knee arthroplasty and nine examiners (three arthroplasty surgeons, three fellows, and three residents) were asked to clinically assess the amount of fixed flexion. Three examiners repeated the process one week later. The mean error from the radiograph in the navigation group was 2.18 degrees (95%CI 2.18+/−0.917) compared to 5.57 degrees (CI 5.57+/− 0.715) in the observer group. The navigation was more consistent with a range of error of only 5.5 degrees (standard deviation 1.59). The observers had a range of error of 18.5 degrees (S.D. = 4.06). When analysing the observers’ error with respect to flexion (+) and extension (−), they tended to under-estimate the amount of knee flexion (median error=−4) whereas the navigation was more evenly distributed (median error=0). The highest correlation was found between navigation and the radiograph r=0.96. The highest observer correlation with the radiograph was a consultant surgeon (r=0.91) and the worst was from a resident (r=0.74). The intra-class correlation coefficient was 0.88 for the three surgeons who repeated the measurements; their mean error was 3.5 degrees with a range of fifteen degrees. The use of computer navigation appears to be more accurate in assessing the degree of knee flexion, with a reduced range of error when compared to clinical assessment. It is therefore less likely to leave the patient with residual fixed flexion after knee arthroplasty.
The purpose of this study was to evaluate the effect of previous femoral osteotomy on the outcome of total hip replacement performed for degenerative arthritis secondary to developmental dysplasia of the hip. Eighty three primary total hip arthroplasties were performed in sixty-nine patients with osteoarthritis secondary to developmental hip dysplasia (DDH) with a minimum three year follow up. Twenty six hips had undergone previous femoral osteotomy (eleven hips, femoral osteotomy alone (FO); fifteen hips, combined femoral and pelvic osteotomy and fifty-seven hips, no previous surgery. The non operative patients with DDH served as an age and sex matched control group (control). Cementless arthroplasty was performed in seventy-eight hips. The mean duration from femoral osteotomy to primary THA was 22.9 years. The mean follow up was 7.6 years (FO) and 7.2 years (control). The overall revision rate was 15.4 % (FO) and 21.1 % in the Control group (p>
0.05). Twenty-one hips had one or more complications during or after surgery. The FO group had a higher femoral fracture rate (23.1%) compared to controls (10.5%) (p<
0.05). At latest mean follow-up (7.4 yrs (range, two to sixteen)), the mean Harris hip score was eighty-five (FO) and eighty-five (control group) (p>
0.05). The function and pain scores in the femoral osteotomy group were similar to the controls (p>
0.05). The requirement for bone grafting was similar and operative time significantly greater (FO) compared to controls. The frequency of radiolucent lines around the femoral component in the FO group (36%) was significantly higher than the control group (12.2%) (p<
0.05). Survival analysis was performed with the Kaplan-Meier method. At ten years, the survival of the acetabular component was 84.6%/73.6% and for the femoral component 92.2%/96% in the FO/control group. Patients with a prior femoral osteotomy have no significant difference in functional outcome, overall complication rate or revision rate compared to controls. However, there is a significant increase in femoral fracture and operative time. Previous femoral osteotomy does not compromise the functional outcome of subsequent total hip arthroplasty.
To assess the accuracy of plain digitised radiographic images for measurement of neck-shaft and stem-shaft angles in hip resurfacing arthroplasty. Fifteen patients having undergone hip resurfacing arthroplasty with the Birmingham Hip Resurfacing (BHR) were selected at random. Digital radiographs were analyzed by three observers. Each observer measured the femoral neck-shaft angles (NSA) of the pre-operative and stem-shaft angles (SSA) of the postoperative radiographs on two separate occasions spanning one week. The effect of femur position on SSA measured by digital radiographs was also analyzed. A BHR prosthesis was cemented into a third generation Sawbone composite femur. Radiographs were taken with the synthetic specimen positioned in varying angles of both flexion and external rotation in increments of 10° ranging from 0° to 90°. The mean intraobserver difference in measured angle was 3.13° (SD 2.37°, 95% CI +/−4.64°) for the NSA group and 1.49° (SD 2.28°, 95% CI +/−4.47°) for the SSA group. The intraclass correlation coefficient for the NSA group was 0.616 and for the SSA group was 0.855. Flexion of the synthetic femur of twenty degrees resulted in a five degree discrepancy in measured SSA and flexion of forty degrees resulted in a thirteen degree discrepancy. External rotation of the synthetic specimen of twenty and forty degrees resulted in a three and nine degree discrepancy in measured SSA, respectively. Patient malposition during radiographic imaging can contribute to erroneous NSA and SSA results. Significant intra- and inter-observer variation was noted in the measurement of neck shaft angle however, variation was less marked for measurement of stem shaft angle.
The purpose of this study was to evaluate functional outcome following supracondylar femur fractures using patient-based outcome measures. Patients having sustained supracondylar femur fractures between 1990 and 2004 were identified from the fracture databases of two level-one trauma centres. Three patient-based outcome measures, the Short Form-36 (SF-36) Version two, the Short Musculoskeletal Functional Scale (SMFA), and the Lower Extremity Functional Scale (LEFS) were used to evaluate functional outcome. Each patient’s medical record was also reviewed to obtain information regarding potential predictors of outcome, including age, gender, fracture type (AO classification), presence of comorbidities, smoking status, open vs. closed fracture, and occurrence of complications. Univariate and multivariate models were then used to identify significant predictors of outcome, as reflected in the SMFA bother and dysfunction scores. Sixty-one patients (thirty-five males and twenty-six females) with an average age (at time of injury) of 53 ± 18 years consented to participate. The average length of follow-up was 64 ± 34 months from the time of injury. Mean SF-36 V2 scores were lower than Canadian population norms indicating decreased function or greater pain, while mean SMFA scores were higher than published population norms indicating greater impairment and bother. The mean LEFS score was 40.78 ± 15.90 out of a maximum score of eighty. At the univariate level, the presence of complications was a significant predictor of both the SMFA bother (p=0.002) and dysfunction scores (p=0.015), while positive smoking status was a significant predictor of the bother score (p=0.002). Based on a multivariate linear regression model, the presence of complications (p=0.013) and positive smoking status (p=0.011) were both significant predictors of a higher SMFA bother score. In the multivariate model for SMFA dysfunction score, the presence of complications (p=0.014) and the presence of comorbidities (p=0.017) were significant predictors of a higher score. Comparing SF-36 and SMFA scores with published population norms, supracondylar femur fractures were associated with residual impact. Based on our analysis, smoking, the presence of medical comorbidities at the time of fracture, and the occurrence of complications following fracture repair were the main predictors of poorer patient outcomes following supracondylar femur fracture.
We aimed to establish if radiological parameters, dual energy x-ray absorbtiometry (DEXA) and quantitative CT (qCT) could predict the risk of sustaining a femoral neck fracture following hip resurfacing. Twenty-one unilateral fresh frozen femurs were used. Each femur had a plain AP radiograph, DEXA scan and quantitative CT scan. Femurs were then prepared for a Birmingham Hip Resurfacing femoral component with the stem shaft angle equal to the native neck shaft angle. The femoral component was then cemented onto the prepared femoral head. No notching of the femoral neck occurred in any specimens. A repeat radiograph was performed to confirm the stem shaft angle. The femurs were then potted in a position of single leg stance and tested in the axial direction to failure using an Instron mechanical tester. The load to failure was then analysed with the radiological, DEXA and qCT parameters using multiple regression. The strongest correlation with the load to failure values was the total mineral content of the femoral neck at the head/neck junction using qCT r= 0.74 (p<
0.001). This improved to r=0.76 (p<
0.001) when neck width was included in the analysis. The total bone mineral density measurement from the DEXA scan showed a correlation with the load to failure of r=0.69 (p<
0.001). Radiological parameters only moderately correlated with the load to failure values; neck width (r=0.55), head diameter (r= 0.49) and femoral off-set (r=0.3). This study suggests that a patient’s risk of femoral neck fracture following hip resurfacing is most strongly correlated with total mineral content at the head/neck junction and bone mineral density. This biomechanical data suggests that the risk of post-operative femoral neck fracture may be most accurately identified with a pre-operative quantitative CT scan through the head/neck junction combined with the femoral neck width.
We aimed to identify whether patients in lower socioeconomic groups had worse function prior to total knee arthroplasty and to establish whether these patients had worse post-operative outcome following total knee arthroplasty. Data was obtained from the Kinemax outcome study, this was a prospective observational study of 974 patients undergoing primary total knee arthroplasty for osteoarthritis. The study was undertaken in thirteen centers, four in the United States, six in the United Kingdom, two in Australia and one in Canada. Pre-operative data was collected within six weeks of surgery and patients were followed for two years post-operatively. Pre-operative details of the patient’s demographics, socioeconomic status (education and income), height, weight and co-morbid conditions were obtained. The WOMAC and SF-36 scores were also obtained. Multivariate regression was utilised to analyse the association between socioeconomic status and the patient’s pre-operative scores and post-operative outcome. During the analysis, we were able to control for variables that have previously been shown to effect pre-operative scores and post-operative outcome. Patients with a lower income had a significantly worse pre-operative WOMAC pain (p=0.021) and function score (p=0.039) than those with higher incomes. However, income did not have a significant impact on outcome except for WOMAC Pain at 12-months (p=0.014). At all the other post-operative assessment times, there was no correlation between income and WOMAC Pain and WOMAC Function. Level of education did not correlate with pre-operative scores or with outcome at any time during follow-up. This study demonstrates that across all four countries, patients with lower incomes appear to have a greater need for total knee arthroplasty. However, level of income and educational status did not appear to effect the final outcome following total knee arthroplasty. Patients with lower incomes appear able to compensate for their worse pre-operative score and obtain similar outcomes post-operatively.
Alignment of the femoral component during hip resurfacing has been implicated in the early failure of this device. Techniques to facilitate a more accurate placement of the femoral component may help prevent these early failures. We aim to establish whether the use of imageless computer navigation can improve the accuracy in alignment of the femoral component during hip resurfacing. 6 pairs of cadaveric limbs were randomized to the use of computer navigation or standard instrumentation. All hips had radiographs taken prior to the procedure to facilitate accurate templating. All femoral components were planned to be implanted with a stem shaft angle of 135 degrees. The initial guide wire was placed using either the standard jig with a pin placed in the lateral cortex or with the use of an imageless computer navigation system. The femoral head was then prepared in the same fashion for both groups. Following the procedure radiographs were taken to assess the alignment of the femoral component. The mean stem shaft angle in the computer navigation group was 133.3 degrees compared to 127.7 degrees in the standard instrumentation group (p=0.03). The standard instrumentation group had a range of error of 15 degrees with a standard deviation of 4.2 degrees. The computer navigated group had a range of error of only 8 degrees with a standard deviation of 2.9 degrees. Our results demonstrated that the use of standard alignment instrumentation consistently placed the femoral component in a more varus position when compared to the computer navigation group. The computer navigation was also more consistent in its placement of the femoral component when compared to standard instrumentation. We suggest that imageless computer navigation appears to improve the accuracy of alignment of the femoral component during hip resurfacing.
Ten out of 32 hips required revision; 9 acetabular components were revised because of aseptic loosening (3), osteolysis/excessive wear (4), instability (1) and infection (1) with a total revision rate of 28%. Eight patients needed acetabular revision alone, one femoral revision alone and one revision of both components. There was no significant difference in bone grafting, heterotopic bone formation, revision rate, operative time and blood loss between the two groups (p>
0.05).
We aimed to establish if radiological parameters, dual energy x-ray absorbtiometry (DEXA) and quantitative CT (qCT) could predict the risk of sustaining a femoral neck fracture following hip resurfacing. 21 unilateral fresh frozen femurs were used. Each femur had a plain AP radiograph, DEXA scan and quantitative CT scan. Femurs were then prepared for a Birmingham Hip Resurfacing femoral component with the stem shaft angle equal to the native neck shaft angle. The femoral component was then cemented onto the prepared femoral head. No notching of the femoral neck occurred in any specimens. A repeat radiograph was performed to confirm the stem shaft angle. The femurs were then potted in a position of single leg stance and tested in the axial direction to failure using an Instron mechanical tester. The load to failure was then analysed with the radiological, DEXA and qCT parameters using multiple regression. The strongest correlation with the load to failure values was the total mineral content of the femoral neck at the head/neck junction using qCT r= 0.74 (p<
0.001). This improved to r=0.76 (p<
0.001) when neck width was included in the analysis. The total bone mineral density measurement from the DEXA scan showed a correlation with the load to failure of r=0.69 (p<
0.001). Radiological parameters only moderately correlated with the load to failure values; neck width (r=0.55), head diameter (r= 0.49) and femoral off-set (r=0.3). This study suggests that a patient’s risk of femoral neck fracture following hip resurfacing is most strongly correlated with total mineral content at the head/neck junction and bone mineral density. This biomechanical data suggests that the risk of post-operative femoral neck fracture may be most accurately identified with a pre-operative quantitative CT scan through the head/neck junction combined with the femoral neck width.
A three dimensional femoral finite element model was constructed and molded with a femoral component constructed from the dimensions of a Birmingham Hip Resurfacing. The model was created with a superior femoral neck notch of increasing depths.
Thirty total hip replacements in twenty-eight patients in which a Zirconia/Polyethylene articulation was utilized were compared to a control group undergoing total hip replacement utilizing Cobalt-Chrome/Polyethylene articulation. These patients were matched for gender, BMI and pre-operative diagnosis. At nine years after implantation there was no difference in the functional outcome between the two groups and no difference in liner wear rate on x-ray (Livermore technique). There was a 27% revision rate in the Zirconia group compared to the 11.5% revision rate in the Cobalt-Chrome group. Bearing surfaces require long- term clinical follow-up to validate in vitro performance. To determine the benefit of Zirconia on polyethylene versus cobalt-chrome on polyethylene in total hip articulation. Zirconia offers no advantage over a cobalt-chrome head in decreasing in vivo polyethylene wear at ten- year follow-up. Newer bearing surfaces require long- term clinical follow-up to validate in vitro laboratory performance. All primary total hip replacements at this institution are entered prospectively in a database and are assessed on an annual basis. All patients in this study were followed for a mean of nine years with a range of six to thirteen years. Thirty cementless total hip arthroplasties were performed in twenty-eight patients utilizing a Zirconia head coupled with a polyethylene acetabular component. Twenty-six hips have been followed for a mean of nine years. These were matched to a control group of twenty-six hips in twenty-six patients utilizing a cobalt-chrome head coupled with an identical polyethylene liner followed for a mean of ten years (range five to fourteen years). There was no functional difference in outcome at nine years between the two groups utilizing the Livermore technique there was no difference in the liner wear rate between the two patient groups. However, seven hips (27%) of the Zirconia group required revision due to loosening and/or extensive osteolysis around the cup and only three hips (11.5%) required revision in the cobalt-chrome group. Our study demonstrates that although changes in component designs and materials may offer theoretical advantages over current components their effect in vivo remains questionable.
We evaluated the clinical, radiographic, and functional outcome of uncemented total hip arthroplasty (THA) following vascularized fibular grafting for avascular necrosis (AVN) of the femoral head. A group of twenty-two patients who had been converted from a vascularized fibular graft to THA was compared to a similar group of twenty-two patients who had received a THA with no prior graft. The graft group was found to have worse outcomes than the control group as measured by SF-36, and WOMAC scores, as well as a hip score. These results show that vascularized fibular grafting complicates future THA. The Purpose of this study was to evaluate the clinical, radiographic, and functional outcome of uncemented total hip arthroplasty (THA) following vascularized fibular grafting for avascular necrosis (AVN) of the femoral head. These results indicate that functional and clinical outcome following post-graft THA is worse than outcome following THA performed as a primary intervention. Judicious use of the vascularized fibular graft procedure is critical in order to minimize the number of graft failures and avoid the negative outcomes associated with THA after failed vascularized fibular grafting. Twenty-six hips in twenty-two patients who had a THA following a failed vascularized fibular graft were compared to a group of twenty-three hips in twenty-two age and sex-matched patients who had received a THA with no prior graft (combined mean age: 39.0 yrs). Primary outcome measures included the SF-36 (patient-based general health assessment – total score and physical sub-component) and WOMAC (patient-based arthritis specific score) scores at matched follow up times (mean: 6.2years, range: two to fourteen years). An objective hip score was also used, as were several radiographic variables. The post-graft group had lower SF-36 final scores (p<
0.006), lower SF-36: physical function scores (p<
0.001), and lower WOMAC scores (p<
0.045) than the control group. Post-graft THA was complicated by longer operative time (p<
0.025) and greater subsidence of the femoral prosthesis (p<
0.004) compared to controls. Additionally, the post-graft group had worse hip score values (p<
0.05) than controls. Vascularized fibular grafting is a commonly used procedure to cure or delay progression of AVN in the hip. Currently this procedure is used for young (<
40 years) patients with hip AVN who are in an early, pre-collapse stage of the disease. Although the efficacy of vascularized fibular grafting has been proven, up to 29% of grafts fail at five years and need to be converted to THA (Urbaniak
Fifty-five patients undergoing isolated acetabular revisions in fifty-seven hips were available for review. In thirty-three of fifty-seven hips there was no significant acetabular deficiency; of the remaining twenty-four hips twenty underwent allograft reconstruction and four autogenous bone grafting. Mean follow-up was four years with a range of three to seven years; there have been no femoral loosening, and three further surgical procedures for hip instability. All acetabular components at last review were soundly fixed with the exception of one patient who underwent excision arthroplasty at twelve months for deep infection. The purpose of this study was to review the functional outcome and the fate of the femoral stem and revised acetabular component following isolated ace-tabular revision. Findings of the current study demonstrate that isolated acetabular revision does not compromise the final functional nor radiographic outcome in acetabular revision in appropriately selected patients; the fate of the femoral component is not adversely influenced by this procedure. There is no need to remove the femoral component at the time of acetabular revision if the femoral component is well fixed and stable by pre- and intra-operative assessment. Prospectively entered data on fifty-seven hips (fifty-five patients) who have undergone isolated acetabular revision without femoral revision was available for review. All patients were assessed pre-operatively and post-operatively on an annual basis by means of physical examination, x-ray, SF-36 and WOMAC questionnaires. In thirty-three of fifty-seven hips there was no significant acetabular deficiency; of the remaining twenty-four hips, one had a segmental defect, thirteen had a cavitary defect and ten had a combined segmental and cavitary defect. Osteolysis existed in the proximal femur of two hips. Bone grafting in twenty-four hips consisted of morselized allograft in nine; combined structural and morselized allograft used in eleven and autogenous bone used in four acetabular defects. Autogenous bone grafting was done in two femoral osteolytic lesions. Mean follow-up was four years with a range of three to seven years. The mean duration of arthroplasty prior to revision was fourteen years (range four to twenty-three years). There were no nerve palsies, vascular injuries or intra-operative fractures in this patient group. All ace-tabular components at latest review were soundly fixed with the exception of one patient who underwent excision arthroplasty at twelve months for deep infection. Twenty-one of the twenty-four hips with bone grafting demonstrated positive radiographic signs of incorporation; the remaining threehips have a stable interface but no evidence of bone ingrowth. Three of the fifty-seven hips presented with hip dislocations after revision arthroplasty; two were managed by closed reduction; the third by open reduction and soft tissue repair.
This study investigated the effect presence, method, and timing of fixation of femoral shaft fractures have on the morbidity and mortality of patients with pulmonary contusion. In the multiply-injured patient with femoral shaft fractures, early (<
24 hours) fracture stabilization with closed, reamed, statically-locked intramedullary nailing has been shown to decrease morbidity and mortality. Controversy exists as to whether such treatment compromises the outcome in patients that have significant co-existing pulmonary injury. This study is the first to specifically investigate the sub-group of patients that have pulmonary contusion. A retrospective review of patients presenting to a Level One trauma center from 1990 to 2002 with pulmonary contusion identified three hundred and twenty-two cases. Patient characteristics of age, sex, GCS, ISS, AIS, presence of femoral shaft fracture, method and timing of treatment of femoral shaft fracture, and presence of other pulmonary injuries were recorded, as were the outcomes of pulmonary complications (acute lung injury (ALI), ARDS, fat embolism syndrome, pulmonary embolism, and pneumonia), days on ventilatory support, days in the intensive care unit and ward, and death. There were no significant differences in the patient characteristics between groups with and without femoral shaft fracture. Except for an increased likelihood of the femoral shaft fracture group having ALI (RR 1.11), there were no significant differences in outcomes between the femur fracture/non-femur fracture groups. As well, there were no significant differences in outcomes between the groups that had fracture fixation before or after twenty-four hours or had the fracture fixed with or without intramedullary nailing. The presence, method, and timing of treatment of femoral shaft fractures do not increase the morbidity or mortality of trauma patients that have pulmonary contusion.