Objectives. The present study describes a novel technique for revitalising allogenic intrasynovial tendons by combining cell-based therapy and
The study objective was to prospectively assess clinical outcomes for a pilot cohort of tibial shaft fractures treated with a new tibial nailing system that produces controlled axial interfragmentary micromotion. The hypothesis was that axial micromotion enhances fracture healing compared to static interlocking. Patients were treated in a single level I trauma centre over a 2.5-year period. Group allocation was not randomized; both the micromotion nail and standard-of-care static locking nails (control group) were commercially available and selected at the discretion of the treating surgeons. Injury risk levels were quantified using the Nonunion Risk Determination (NURD) score. Radiological healing was assessed until 24 weeks or clinical union. Low-dose CT scans were acquired at 12 weeks and virtual mechanical testing was performed to objectively assess structural bone healing.Aims
Methods
Aims. It has been established that
We have determined whether somatosensory evoked potentials (SEPs) were detectable after direct
Regulation of articular cartilage homeostasis is a complex process in which biologic and mechanical factors are involved. Hyperactivation of Wnt signaling, associated with osteoarthritis (OA), could jeopardize the protective anabolic effect of physiological loading. Here, we investigated the role of excessive Wnt signalling in cartilage molecular responses to loading. Human cartilage explants were harvested from hips of donors without OA. The Wnt agonist CHIR99021 was used to activate Wnt signalling 24 hours before cartilage explants were subjected to a loading protocol consisting of 2 cycles of 1 hour of 10% compression at 1 Hz, followed by 1-hour free swelling. Mechano-responsiveness was evaluated using the expression of type II collagen, aggrecan and MMP-13. Expression of known target genes TCF-1 and c-JUN was evaluated as positive control for Wnt and
Aims.
Secondary bone healing is impacted by the extent of interfragmentary motion at the fracture site. It provides mechanical stimulus that is required for the formation of fracture callus. In clinical settings, interfragmentary motion is induced by physiological loading of the broken bone – for example, by weight-bearing. However, there is no consensus about when mechanical stimuli should be applied to achieve fast and robust healing response. Therefore, this study aims to identify the effect of the immediate and delayed application of mechanical stimuli on secondary bone healing. A partial tibial osteotomy was created in twelve Swiss White Alpine sheep and stabilized using an active external fixator that induced well-controlled interfragmentary motion in form of a strain gradient. Animals were randomly assigned into two groups which mimicked early (immediate group) and late (delayed group) weight-bearing. The immediate group received daily stimulation (1000 cycles/day) from the first day post-op and the delayed group from the 22nd day post-op. Healing progression was evaluated by measurements of the stiffness of the repair tissue during
Bone is a dynamic tissue that undergoes continuous mechanical forces. Mechanical stimuli applied on scaffolds resembling a part of the human bone tissue affects the osteogenesis [1]. Poly(3,4-ethylenedioxythiophene) (PEDOT) is a piezoelectric material that responds to
Introduction and Objective. Traditionally, osteoarthritis (OA) has been associated mostly with degradation of cartilage only. More recently, it has been established that other joint tissues, in particular bone, are also centrally involved. However, the link between these two tissues remains unclear. This relationship is particularly evident in post-traumatic OA (PTOA), where bone marrow lesions (BMLs), as well as fluctuating levels of inflammation, are present long before cartilage degradation begins. The process of bone-cartilage crosstalk has been challenging to study due to its multi-tissue complexity. Thus, the use of explant model systems have been crucial in advancing our knowledge. Thus, we developed a novel patellar explant model, to study bone cartilage crosstalk, in particular related to subchondral bone damage, as an alternative to traditional femoral head explants or cylindrical core specimens. The commonly used osteochondral explant models are limited, for our application, since they involve bone damage during harvest. The specifics aim of this study was to validate this novel patellar explant model by using IL-1B to stimulate the inflammatory response and
In the course of uneventful secondary bone healing, a fracture gap is progressively overgrown by callus which subsequently calcifies and remodels into new bone. It is widely accepted that callus formation is promoted by
Introduction and Objective. Exosomal miRNA have been shown to regulate many myogenic and osteogenic pathways involved in injury repair and healing. It is also known that rehabilitation and exercise can improve muscle mass and bone growth. The mechanisms by which this occurs in vivo are well studied, but the impact exosomes and their associated miRNA cargo have is unclear. With this knowledge and question in mind, we hypothesized that C2C12 myoblasts subjected to in vitro mechanical stimulus (“exercise”) would exhibit improved exosome production and differentially expressed miRNA cargo when compared to their static (“unexercised”) counterparts. Materials and Methods. C2C12 myoblasts were cultured using the FlexCell FX-5000TT bioreactor. Two exercise regimens were programmed: 1) low intensity regimen (LIR) (0–15% strain at 0.5 Hz for 24 hours) 2) high intensity interval regimen (HIIR) (12–22% strain at 1 Hz for 10 minutes followed by 50 minutes of rest repeated for 24 hours). Unexercised (static) cells were cultured in parallel. Exosomes were isolated using the Invitrogen Total Exosome Isolation Reagent. The Pierce BCA Protein Assay, System Bioscience's ExoELISA-ULTRA CD81 Kit and, SBI's ExoFlow-ONE EV labeling kit were used to confirm and quantify exosome number and protein concentration. The SBI Exo-NGS service was used to perform miRNA sequencing on isolated exosomes. Results. All exercise regimens resulted in increased exosome concentrations as determined by CD81 exosome ELISA and flow-cytometry based exosome quantification. The LIR interestingly produced significantly more exosomes than static and HIIR. Within the exosomes from
Introduction and Objective. It is widely accepted that interfragmentary strain stimulus promotes callus formation during secondary bone healing. However, the impact of the temporal variation of
The course of secondary fracture healing typically consists of four major phases including inflammation, soft and hard callus formation, and bone remodeling. Callus formation is promoted by
Post-traumatic osteoarthritis (PTOA) is a subset of osteoarthritis, which occurs secondary to traumatic joint injury which is known to cause pathological changes to the osteochondral unit. Articular cartilage degradation is a primary hallmark of OA, and is normally associated with end-stage disease. However, subchondral bone marrow lesions are associated with joint injury, and may represent localized bone microdamage. Changes in the osteochondral unit have been traditionally studied using explant models, of which the femoral-head model is the most common. However, the bone damage caused during harvest can confound studies of microdamage. Thus, we used a novel patellar explant model to study osteochondral tissue dynamics and mechanistic changes in bone-cartilage crosstalk. Firstly, we characterized explants by comparing patella with femoral head models. Then, the patellar explants (n=269) were subjected to either mechanical or inflammatory stimulus. For mechanical stimulus 10% strain was applied at 0.5 and 1 Hz for 10 cycles. We also studied the responses of osteochondral tissues to 10ng/ml of TNF-α or IL-1β for 24hrs. In general the findings showed that patellar explant viability compared extremely well to the femoral head explant. Following IL-1β or TNF-α treatment, MMP13, significantly increased three days post exposure, furthermore we observed a decrease in sulfate glycoaminoglycan (sGAG) content. Bone morphometric analysis showed no significant changes. Contrastingly,
Osteoporotic fracture has become a major problem in ageing population and often requires prolonged healing time. Low Intensity Pulsed Ultrasound (LIPUS) can significantly enhance fracture healing through alteration of osteocyte lacuno-canalicular network (LCN). DMP1 in osteocytes is responsible for maintaining LCN and mineralisation. This study aims to investigate osteocyte-specific DMP1's role in enhanced osteoporotic fracture healing in response to
In the native articular cartilage microenvironment, chondrocytes are constantly subjected to dynamic physical stimuli that maintains tissue homeostasis. They produce extra cellular matrix (ECM) components such as collagens (type II mainly, 50-75%), proteoglycans (10-30%) and other type of proteins. 1. . While collagen offers a large resistance in tension, proteoglycans are the responsible of the viscoelastic response under compression due to the negative charge they confer to the ECM allowing it to entrap a large amount of interstitial fluid. In pathologic states (e.g. osteoarthritis), this ECM is degenerated and the negative charge becomes unbalanced, losing the chondroprotective properties and resulting on an overloaded chondrocytes that further degenerate the matrix. Low-Intensity Pulsed Ultrasound Stimulation (LIPUS) has been used to generate acoustic (pressure) waves that create bubbles that collapse with cells, inducing a stimulus that can modulate cell response. 2. This
Extracellular matrix (ECM) mechanical cues guide healing in tendons. Yet, the molecular mechanisms orchestrating the healing processes remain elusive. Appropriate tissue tension is essential for tendon homeostasis and tissue health. By mapping the attainment of tensional homeostasis, we aim to understand how ECM tension regulates healing. We hypothesize that diseased tendon returns to homeostasis only after the cells reach a mechanically gated exit from wound healing. We engineered a 3D mechano-culture system to create tendon-like constructs by embedding patient-derived tendon cells into a collagen I hydrogel. Casting the hydrogel between posts anchored in silicone allowed adjusting the post stiffness. Under this static
To clarify the pathomechanisms of discogenic low back pain, the sympathetic afferent discharge originating from the L5-L6 disc via the L2 root were investigated neurophysiologically in 31 Lewis rats. Sympathetic afferent units were recorded from the L2 root connected to the lumbar sympathetic trunk by rami communicantes. The L5-L6 discs were
Physical activity is a key determinant of bone mass and health, however during adulthood and ageing there appears to be a decrease in the ability to respond positively to exercise which is variable between individuals. While exercise is known to protect against the osteopo-rotic process with modest increases in BMD the exact cellular and molecular responses are poorly understood. We have studied the effect of
Summary. These data suggest that PTH treatment for stimulation of bone healing after trauma is not much dependent on
3D cell culture studies more accurately represent the complex in vivo mechanical environment of human bone and are, thus, superior to 2D studies when testing the efficacy of osteoporosis therapies. As such, the objective of this study was to use a 3D model to investigate the effect of sclerostin antibodies. Sclerostin is a protein, which inhibits osteoblasts and is downregulated under
It is well known that environmental cues such as mechanical loading and/or cell culture medium composition affect tissue-engineered constructs resembling natural bone. These studies are mostly based on an initial setting of the influential parameter that will not be further changed throughout the study. Through the growth of the cells and the deposition of the extracellular matrix (ECM) the initial environmental conditions of the cells will change, and with that also the loads on the cells will change. This study investigates how changes of mechanical load or media composition during culture influences the differentiation and ECM production of mesenchymal stromal cells seeded on porous 3D silk fibroin scaffolds. ECM formation, ECM mineralization and cell differentiation in 3D tissue-engineered bone were analyzed using microscopic tools. Our results suggest that mechanical stimuli are necessary to differentiate human mesenchymal stromal cells of both bone marrow and adipose tissue origin into ECM producing osteoblasts which ultimately become ECM-embedded osteocytes. However, the influence of this stimulus seems to fade quickly after the onset of the culture. Constructs which were initially cultured under mechanical loading continued to deposit minerals at a similar growth rate once the
Introduction and Objective. Anterior cruciate ligament reconstruction (ACLR) with tendon autografts is the “gold standard” technique for surgical treatment of ACL injuries. Common tendon graft choices include patellar tendon (PT), semitendinosus/gracilis “hamstring” tendon (HT), or quadriceps tendon (QT). Healing of the graft after ACLR may be affected by graft type since the tissue is subjected to mechanical stresses during post-operative rehabilitation that play important roles in graft integration, remodeling and maturation. Abnormal mechanical loading can result in high inflammatory and degradative processes and altered extracellular matrix (ECM) synthesis and remodeling, potentially modifying tissue structure, composition, and function. Because of the importance of load and ligamentization for tendon autografts, this study was designed to compare the differential inflammatory and degradative metabolic responses to loading by three tendon types commonly used for autograft ACL reconstruction. Materials and Methods. With IRB approval (IRB # 2009879) and informed patient consent, portions of 9 QT, 7 PT and 6 HT were recovered at the time of standard of care ACLR surgeries. Tissues were minced and digested in 0.2 mg/ml collagenase solution for two hours and were then cultured in 10% FBS at 5% CO. 2. , 37°C, and 95% humidity. Once confluent, cells were plated in Collagen Type I-coated BioFlex® plates (1 × 10. 5. cells/well) and cultured for 2 days prior to the application of strain. Then, media was changed to supplemented DMEM with 2% FBS for the application of strain. Fibroblasts were subjected to continuous
Abstract. Objectives. Osteoporosis of the pelvis and femur is diagnosed in a high proportion of lower-limb amputees which carries an increased fracture risk and subsequently serious implications on mobility, physical dependency and morbidity. Through the development of biofidelic musculoskeletal and finite element (FE) models, we aim to determine the effect of lower-limb amputation on long-term bone remodelling in the hip and to understand the potential underpinning mechanisms for bone degradation in the younger amputee population. Methods. Our models are patient specific and anatomically accurate. Geometries are derived from MRI-scans of one bilateral, above-knee, amputee and one body-matched control subject. Musculoskeletal modelling enables comparison of muscle and joint reaction-forces throughout gait. This provides the loading scenario implemented in FE. FE modelling demonstrates the effect of loading on the amputated limb via a prosthetic socket by comparing bone
We examined cultured osteoblasts derived from paired samples from the greater tuberosity and acromion from eight patients with large chronic tears of the rotator cuff. We found that osteoblasts from the tuberosity had no apparent response to
In a healthy joint, mechanical loading increases matrix synthesis and maintains cell phenotype, while reducing catabolic activities. It activates several pathways, most of them yet largely unknown, with integrins, TGF-β, canonical (Erk 1/2) and stress-activated (JNK) MAPK playing a key role. Degenerative joint diseases are characterized by Wnt upregulation and by the presence of proteolytic fibronectin fragments (FB-fs). Despite they are known to impair some of the aforementioned pathways, little is known on their modulatory effect on cartilage mechanoresponsiveness. This study aims at investigating the effect of mechanical loading in healthy and in vitro diseased cartilage models using pro-hypertrophic Wnt agonist CHIR99021 and the pro-catabolic FB-fs 30 kDa. Human primary chondrocytes from OA patients have been grown in alginate hydrogels for one week, prior to be incubated for 4 days with 3μM CHIR99021 or 1 μM FB-fs. Human cartilage explants isolated from OA patients have incubated 4 days with 3 μM CHIR99021 or 1 μM FB-fs. Both groups have then been
The development of functional biomaterials scaffolds for bone tissue engineering applications includes the control of specific biological and mechanical parameters that are involved in the growth of bone tissue in a way that mimics the physiological process of healing bone defects. Here, we report on the development of composite scaffolds made from biodegradable natural and synthetic biomaterials with characteristic architectural features, functionalized with the osteoinductive growth factor bone morphogenetic protein BMP-2, and evaluating their osteogenic response in static and dynamic cell culture systems. The results show that scaffold designing with advanced technologies combined with appropriate biochemical and
Objectives. The need for bone tissue supplementation exists in a wide range
of clinical conditions involving surgical reconstruction in limbs,
the spine and skull. The bone supplementation materials currently
used include autografts, allografts and inorganic matrix components;
but these pose potentially serious side-effects. In particular the
availability of the autografts is usually limited and their harvesting
causes surgical morbidity. Therefore for the purpose of supplementation
of autologous bone graft, we have developed a method for autologous
extracorporeal bone generation. Methods. Human osteoblast-like cells were seeded on porous granules of
tricalcium phosphate and incubated in osteogenic media while exposed
to
Significant challenges remain to accomplishing the development of fully functional tendon tissue substitutes that can lead to clinically effective and successful applications. Scaffolding materials must meet demanding requirements such i) mimic the hierarchical and anisotropically aligned structure of tendon tissues from the nano- up to the macroscale, ii) meet tendon mechanical requirements and non-linear biomechanical behaviour, iii) provide the necessary biophysical/biochemical cues and mechanical responsiveness to induce the tenogenic differentiation of stem cells and potentiating the effects of biochemical supplementation. On the other side, tenogenic differentiation of stem cells is still to be established, as well as the role of such cells (either naïve or pre-differentiated) in promoting tissue regeneration. We have recently found evidences that magnetic actuation can provide means of
The unique properties of mesenchymal stem cells (MSCs) and their natural presence within the bone marrow make them an attractive source of cells for novel cartilage repair strategies. As mechanics play a critical role in vivo, a more physiological loading regime in vitro would be more appropriate to test novel therapies, and this can be achieved using bioreactors. Using a multiaxial load bioreactor system, we have investigated the effect of
Current cell-based tissue engineering strategies have limited clinical applicability due to the need for large cell numbers and prolonged culture periods that lead to phenotypic drift. In vitro microenvironmental modulators have been proposed to mimic the native tendon. Standard in vitro culture conditions result in delayed extracellular matrix (ECM) deposition, impairing the development of scaffold-free approaches. ECM deposition can be enhanced by macromolecular crowding (MMC), a biophysical phenomenon that governs the milieu of multicellular organisms. We assessed a multifactorial biophysical approach, using MMC and mechanical loading, on different cell sources to determine their suitability for in vitro fabrication of tendon-like tissue. Human dermal fibroblasts (DFs), tenocytes (TCs) and bone marrow mesenchymal stem cells (BMSCs) were cultured with MMC under static and uniaxial strain culture conditions. TCs and DFs exhibited alignment perpendicular to the load, whilst BMSCs did not show preferential alignment. When MMC was used, DFs and BMSCs showed increased deposition of collagen I, the main component in tendon ECM. DFs presented ECM composition similar to TCs with collagen types III, V and VI present. Gene expression analysis revealed upregulation of tenogenic markers by TCs and DFs, such as scleraxis and thrombospondin-4, under both loading and MMC. The combined use of MMC and
Background: Greater tuberosity disuse osteoporosis is a consequence of rotator cuff tear. This is a significant problem as the tendon is implanted into a trough within the greater tuberosity during repair. Failure of the repair is a common complication (up to 50%). We hypothesise that failure in re-implantation is due to deficient bone cell response to
Disuse osteoporosis of the greater tuberosity is a consequence of rotator cuff tear. This is a significant problem as the tendon is implanted into a trough within the greater tuberosity during repair. Failure of the repair is a common complication (up to 50%). We hypothesized that failure in re-implantation is due to deficient bone cell response to
Anterior cruciate ligament (ACL) reconstruction is the current standard of care for ACL tears. However, the results are not consistently successful, autografts or allografts have certain disadvantages, and synthetic grafts have had poor clinical results. The aim of this study was to determine the efficacy of tissue engineering decellularized tibialis tendons by recellularization and culture in a dynamic tissue bioreactor. To determine if recellularization of decellularized tendons combined with
Objective. In order to effectively utilize mechanical signals in the clinic as a non-drug-based intervention to improve cartilage defect regeneration after surgical treatment, it is essential to identify crucial components of the cellular response that are typical to the anabolic process. The mechanisms behind the effect of
Cell-based tissue engineering strategies for tendon repair have limited clinical applicability due to delayed extracellular matrix (ECM) deposition and subsequent prolonged culture periods, which lead to tenogenic phenotypic drift. Deposition of ECM in vitro can be enhanced by macromolecular crowding (MMC), a biophysical phenomenon that governs the intra- and extra-cellular milieu of multicellular organisms, which has been described to accelerate ECM deposition in human tenocytes. A variety of cell sources have been studied for tendon repair including tenocytes, dermal fibroblasts (DFs) and mesenchymal stem cells (MSCs) and various biophysical, biochemical and biological tools have been used to mimic tendon microenvironment. Therefore, we propose to assess the combined effect of MMC and mechanical loading on different cell sources to determine their suitability for the in vitro fabrication of tendon-like tissue. The uniaxial strain induced differential cell orientation based on the differentiation state of the cells: tenocytes and DFs, both permanently differentiated cells exhibited alignment perpendicular to the direction of the load, similarly to what is seen in native tendon environment. Immunocytochemistry showed that, when MMC is used, the DFs and MSCs showed increased deposition of collagen type I, one of the main components in tendon ECM. It is also seen that the ECM deposited follows the alignment of the cell cytoskeleton. However, for tenocytes, deposition of collagen type I is only seen when MMC is used in combination with mechanical loading, indicating that mechanical loading led to increased synthesis of collagen I, suggesting maintenance of the tenogenic phenotype. Other collagen types relevant to native tendon composition were also analysed, including types III, V and VI, and their deposition was also shown to be modulated by the use of MMC and mechanical loading. This appears to recreate the events of tendon tissue formation during development, where these collagen types are involved in regulation of collagen I fibrillogenesis and fibril diameter. Preliminary data also indicates that, under mechanical loading and MMC, expression of tenogenic genes is upregulated whilst chondrogenic and osteogenic markers are downregulated. This indicates the suitability of the combination of MMC and
Background. Osteoarthritis (OA), a common degenerative disorder of synovial joints, is characterized by disruption of the extracellular matrix (ECM) homeostasis with an overall misbalance towards cartilage catabolism. Integrins are alpha/beta heterodimeric transmembrane proteins transmitting chemical and biomechanical signals into the cells. There is a growing consensus that changes of ECM composition by proteolytic degradation of matrix constituents, or alteration of the biomechanical microenvironment of chondrocytes caused by chronic stress or injury significantly increase the risk of OA through the perturbation of integrin signaling. In order to further investigate the role of the b1 integrin subfamily in OA, we have challenged hip cartilage explants dissected for mice lacking beta1 integrins in chondrocytes by cytokines, ECM degradation products or
Circular RNA (circRNA) is involved in the regulation of articular cartilage degeneration induced by inflammatory factors or oxidative stress. In a previous study, we found that the expression of Minus RNA sequencing, fluorescence in situ hybridization, and quantitative real-time polymerase chain reaction (qRT-PCR) were used to detect the expression of Aims
Methods
There is an increasing concern of osteoporotic fractures in the ageing population. Low-magnitude high-frequency vibration (LMHFV) was shown to significantly enhance osteoporotic fracture healing through alteration of osteocyte lacuno-canalicular network (LCN). Dentin matrix protein 1 (DMP1) in osteocytes is known to be responsible for maintaining the LCN and mineralization. This study aimed to investigate the role of osteocyte-specific DMP1 during osteoporotic fracture healing augmented by LMHFV. A metaphyseal fracture was created in the distal femur of ovariectomy-induced osteoporotic Sprague Dawley rats. Rats were randomized to five different groups: 1) DMP1 knockdown (KD), 2) DMP1 KD + vibration (VT), 3) Scramble + VT, 4) VT, and 5) control (CT), where KD was performed by injection of short hairpin RNA (shRNA) into marrow cavity; vibration treatment was conducted at 35 Hz, 0.3 g; 20 minutes/day, five days/week). Assessments included radiography, micro-CT, dynamic histomorphometry and immunohistochemistry on DMP1, sclerostin, E11, and fibroblast growth factor 23 (FGF23). In vitro, murine long bone osteocyte-Y4 (MLO-Y4) osteocyte-like cells were randomized as in vivo groupings. DMP1 KD was performed by transfecting cells with shRNA plasmid. Assessments included immunocytochemistry on osteocyte-specific markers as above, and mineralized nodule staining.Aims
Methods
Osteoarthritis (OA) affects bone cartilage and underlying bone. Mechanically, the underlying bone provides support to the healthy growth of the overlying cartilage. However, with the progress of OA, bone losses and cysts occur in the bone and these would alter the biomechanical behaviour of the joint, and further leading to bone remodelling adversely affect the overlying cartilage. Human femoral head and femoral condyle were collected during hip or knee replacement operation due to the end stage of osteoarthritis (age 50–70), and the cartilage patches were graded and marked. A volunteer patient, with minor cartilage injury in his left knee while the right knee is intact, was used as control. Peripheral quantitative computed tomography (pQCT) was used to scan the bone and to determine the volumetric bone mineral density (vBMD) distribution. The examination of retrieved tissue explants from osteoarthritic patients revealed that patches of cartilage were worn away from the articular surface, and patches of intact cartilage were left. The cysts, ranging from 1 to 10mm were existed in all osteoarthritic bones, and were located close to cartilage defects in the weight-bearing regions, and closely associated with the grade of cartilage defect as measured by pQCT. The bone mineral density (vBMD) distribution demonstrated that the bones around cysts had much higher vBMD than the trabecular bone away from the cysts. Compared to the subchondral bone under thicker cartilage, subchondral bone within cartilage defect has higher vBMD. This may result from the
Osteoarthritis (OA) is a common degenerative joint disease. The osteocyte transcriptome is highly relevant to osteocyte biology. This study aimed to explore the osteocyte transcriptome in subchondral bone affected by OA. Gene expression profiles of OA subchondral bone were used to identify disease-relevant genes and signalling pathways. RNA-sequencing data of a bone loading model were used to identify the loading-responsive gene set. Weighted gene co-expression network analysis (WGCNA) was employed to develop the osteocyte mechanics-responsive gene signature.Aims
Methods
Due to its avascular nature, articular cartilage exhibits a very limited capacity to regenerate and to repair. Although much of the engineered cartilage grafts so far proposed have successfully shown to mimic the morphological and biochemical appearance of hyaline cartilage, they are generally mechanically inferior to the natural tissue. 1. In this study a new bioreactor device was realized to test innovative scaffolds under physiological stimulation (i.e. perfusion fluid flow and dynamic compression), with the aim to produce a more functional engineered tissue construct for articular applications. The computer-controlled bioreactor system has been properly designed to simultaneously provide static or dynamic compression and/or continuous perfusion to 3D engineered constructs, reproducing the physiological loads to which the articular cartilage is subjected. The specifically designed bioreactor comprises a chamber where the grafts are accommodated, a porous piston connected to a linear stepper motor (Dings, Model 34-2080-4-300), which controls its movement to provide
Introduction. Primary cilia are organelles found singularly on almost every cell in the body, including tenocytes. Tendon is a hierarchical, composite structure, and previous work from our group has suggested that the cell populations in the inter-fascicular matrix (IFM) may be different from those within the fascicle matrix (FM). This study investigated how stress deprivation influenced the primary cilia of both cell types, and the mechanics of the IFM and the FM. Materials and Methods. Rat tail tendons were dissected and then either tested immediately (fresh), or maintained in media for 1 week, either stress deprived or at 4% static strain. Fascicles and IFM were then either, fixed and imaged to determine cilia length (n = 80–160 cilia per group from across 3 rats), or mechanically tested to determine the static and viscoelastic properties of both the fascicles and the IFM (n = 6–8 per group). Results. Cilia length in the IFM and FM of fresh samples were not significantly different. After 1 week of stress deprivation, the cilia had significantly increased in length in both the IFM and FM, however the increase in length in the IFM was significantly greater than that in the FM. Cilia in tissue maintained at 4% static strain were significantly shorter than those in stress deprived tissue, however they remained longer than those in fresh tissue. The tensile strength of the fascicles was not affected by stress deprivation or static strain conditions. However, the viscoelastic properties of the stress deprived fascicles were significantly reduced. By contrast, the tensile strength of the IFM was significantly reduced in the stress deprived samples, indicative of greater degradation in this region. Discussion. This is the first time differences in the cilia have been observed between tendon regions. Their different response to stress deprivation provides further evidence that these populations of cells respond differently to changes in
Bone metastases are common and severe complications of cancers. It is estimated to occur in 65–75% of breast and prostate cancer patients and cause 80% of breast cancer-related deaths. Metastasised cancer cells have devastating impacts on bone due to their ability to alter bone remodeling by interacting with osteoblasts and osteoclasts. Exercise, often used as an intervention for cancer patients, regulates bone remodeling via osteocytes. Therefore, we hypothesise that bone mechanical loading may regulate bone metastases via osteocytes. This provides novel insights into the impact of exercises on bone metastases. It will assist in designing cancer intervention programs that lowers the risk for bone metastases. Investigating the mechanisms for the observed effects may also identify potential drug targets. MLO-Y4 osteocyte-like cells (gift of Dr. Bonewald, University of Missouri-Kansas City) on glass slides were placed in flow chambers and subjected to oscillatory fluid flow (1Pa; 1Hz; 2 hours). Media were extracted (conditioned media; CM) post-flow. RAW264.7 osteoclast precursors were conditioned in MLO-Y4 CM for 7 days. Migration of MDA-MB-231 breast cancer cells and PC3 prostate cancer cells towards CM was assayed using Transwell. Viability, apoptosis, and proliferation of the cancer cells in the CM were measured with Fixable Viability Dye eFluor 450, APOPercentage, and BrDu, respectively. P-values were calculated using Student's t-test. Significantly more MDA-MB-231 and PC3 cells migrated towards the CM from MLO-Y4 cells with exposure to flow in comparison to CM from MLO-Y4 cells not exposed to flow. The preferential migration is abolished with anti-VEGF antibodies. MDA-MB-231 cells apoptosis rate was slightly lower in CM from MLO-Y4 cells exposed to flow, while proliferation rate was slightly higher. The current data showed no difference in cancer cells viability and adhesion to collagen between any two groups. On the other hand, it was observed that less MDA-MB-231 cells migrated towards CM from RAW264.7 cells conditioned in CM from MLO-Y4 cells stimulated with flow in comparison to those conditioned in CM from MLO-Y4 cells not stimulated with flow. TRAP staining results confirmed that there were less differentiated osteoclasts when RAW264.7 cells were cultured in CM from MLO-Y4 cells exposed to flow. Overall, this study suggests that when only osteocytes and cancer cells are involved, osteocytes subjected to mechanical loading can promote metastases due to the increased secretion of VEGF. However, with the incorporation of osteoclasts, mechanical loading on osteocytes seems to reduce MDA-MB-231 cell migration. This is likely because osteocytes reduce osteoclastogenesis in response to
Arthroscopic microfracture is a conventional form of treatment for patients with osteochondritis of the talus, involving an area of < 1.5 cm2. However, some patients have persistent pain and limitation of movement in the early postoperative period. No studies have investigated the combined treatment of microfracture and shortwave treatment in these patients. The aim of this prospective single-centre, randomized, double-blind, placebo-controlled trial was to compare the outcome in patients treated with arthroscopic microfracture combined with radial extracorporeal shockwave therapy (rESWT) and arthroscopic microfracture alone, in patients with ostechondritis of the talus. Patients were randomly enrolled into two groups. At three weeks postoperatively, the rESWT group was given shockwave treatment, once every other day, for five treatments. In the control group the head of the device which delivered the treatment had no energy output. The two groups were evaluated before surgery and at six weeks and three, six and 12 months postoperatively. The primary outcome measure was the American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot Scale. Secondary outcome measures included a visual analogue scale (VAS) score for pain and the area of bone marrow oedema of the talus as identified on sagittal fat suppression sequence MRI scans.Aims
Methods
Background. Residual stress remains in bone tissues after press-fit-fixation of a joint prosthesis, recently employed for joint arthroplasty. The response of bone tissues to the residual stress is, however, unknown because it is not physiological. This unnatural stimulus may have adverse effects on bone tissues, including causing thigh pain or bone resorption. In the present study, we designed an experimental method to apply a stationary load from inside an animal femur using a loop spring of titanium alloy with super elasticity. The femoral response was assessed based on the migration of the wire into bone twelve weeks after implantation. As the results, wire migration was noted in 10 of 11 cases. Methods. We developed a method using a loop spring made of super elastic titanium alloy, which can maintain sufficient stress in a rat femur for a prolonged period. This titanium alloy, which contains 43.94% titanium and 56.06% nickel, was supplied as a wire (WDL1, Actment Co., Ltd., Kasukabe, Japan). In the present study, an experimental method was designed to apply a stationary load from inside a rat femur by inserting a loop spring made of super elastic wire. Results. Ten weeks after implantation, migration of the spring wire into the cortical bone was noted in 10 of 11 cases. To assess spring migration in cortical bone, we measured the distance from the endocortical surface to the tip of springs on micro-CT images. The line of the endocortical surface was extrapolated from the adjacent to the wire contact area. The estimated load was distributed from 1.19 to 3.28 N. The migration depth on anterior and posterior sides was not associated with the estimated load. Discussion. In the present study, we developed a method of generating a stationary stress field in a rat femur using a loop spring made from Ni-Ti alloy with super ermore, implantation of the pin was presumed to be able to interpretation by the thelasticity. The load that originated from elastic deformation was large enough to apply
Osteoarthritis (OA) is mainly caused by ageing, strain, trauma, and congenital joint abnormalities, resulting in articular cartilage degeneration. During the pathogenesis of OA, the changes in subchondral bone (SB) are not only secondary manifestations of OA, but also an active part of the disease, and are closely associated with the severity of OA. In different stages of OA, there were microstructural changes in SB. Osteocytes, osteoblasts, and osteoclasts in SB are important in the pathogenesis of OA. The signal transduction mechanism in SB is necessary to maintain the balance of a stable phenotype, extracellular matrix (ECM) synthesis, and bone remodelling between articular cartilage and SB. An imbalance in signal transduction can lead to reduced cartilage quality and SB thickening, which leads to the progression of OA. By understanding changes in SB in OA, researchers are exploring drugs that can regulate these changes, which will help to provide new ideas for the treatment of OA. Cite this article:
To investigate the risk factors for unsuccessful radial head reduction (RHR) in children with chronic Monteggia fractures (CMFs) treated surgically. A total of 209 children (mean age 6.84 years (SD 2.87)), who underwent surgical treatment for CMFs between March 2015 and March 2023 at six institutions, were retrospectively reviewed. Assessed risk factors included age, sex, laterality, dislocation direction and distance, preoperative proximal radial metaphysis width, time from injury to surgery, reduction method, annular ligament reconstruction, radiocapitellar joint fixation, ulnar osteotomy, site of ulnar osteotomy, preoperative and postoperative ulnar angulation, ulnar fixation method, progressive ulnar distraction, and postoperative cast immobilization. Independent-samples Aims
Methods
This review provides a concise outline of the advances made in the care of patients and to the quality of life after a traumatic spinal cord injury (SCI) over the last century. Despite these improvements reversal of the neurological injury is not yet possible. Instead, current treatment is limited to providing symptomatic relief, avoiding secondary insults and preventing additional sequelae. However, with an ever-advancing technology and deeper understanding of the damaged spinal cord, this appears increasingly conceivable. A brief synopsis of the most prominent challenges facing both clinicians and research scientists in developing functional treatments for a progressively complex injury are presented. Moreover, the multiple mechanisms by which damage propagates many months after the original injury requires a multifaceted approach to ameliorate the human spinal cord. We discuss potential methods to protect the spinal cord from damage, and to manipulate the inherent inhibition of the spinal cord to regeneration and repair. Although acute and chronic SCI share common final pathways resulting in cell death and neurological deficits, the underlying putative mechanisms of chronic SCI and the treatments are not covered in this review.
Introduction. Low back pain is a major public health problem in our society. Degeneration of intervertebral disc (IVD) appears to be the leading cause of chronic low-back pain [1].
Aim: To determine the pattern of gene expression induced in cultured human chondrocytes in response to compressive mechanical loads. Methods: Chondrocytes were obtained from tissue discarded at the time of a number of total knee replacements and where established in primary cell culture. The cultured chondrocytes were then subjected to compressive and tensile loads using a Flexcell machine. The RNA was subsequently extracted from these chondrocytes and the alterations in gene expression determined using the Affymetrix Gene Array machine. Results: Intended as an in vitro model for Osteoarthritis, it was found that
The uncemented cup with iliac stem ensures immediate primary stability by fixation to the hipbone in acetabular loosening with severe bone defect. Homologous bone grafts contribute to restoring bone stock, which is a fundamental requirement for long lasting implant stability. From 2002 to 2004 we implanted 23 cups with iliac stems in 22 patients. In 7 cases there was also stem loosening, and so total hip arthroplasty was performed. In 2 patients the defect was grade 2b, in 5 grade 3a, and in 16 grade 3b according to Paprosky. A direct lateral approach was performed in the supine position. Morselized bone grafts were used in all cases by the “impaction grafting” technique, and in 4 cases modelled structural grafts were also employed. Mean follow-up has been 18 months (8–32). So far we have not had any cases of loosening. At follow-up x-rays showed remodelling of the grafts with integration. The cup with iliac stem enables primary stability on healthy bone tissue, and protects the grafts form
Short Summary. The present study demonstrated the feasibility of culturing a large number of standardised granular MSC-containing constructs in a packed bed/column bioreactor that can produce sheep MSC-containing constructs to repair critical-size bone defects in sheep model. Introduction. Endogenous tissue regeneration mechanisms do not suffice to repair large segmental long-bone defects. Although autologous bone graft remains the gold standard for bone repair, the pertinent surgical technique is limited. Tissue constructs composed of MSCs seeded onto biocompatible scaffolds have been proposed for repairing bone defects and have been established in clinically-relevant animal models. Producing tissue constructs for healing bone defects of clinically-relevant volume requires a large number of cells to heal an approximately 3 cm segmental bone defect. For this reason, a major challenge is to expand cells from a bone marrow aspirate to a much larger, and sufficient, number of MSCs. In this respect, bioreactor systems which provide a reproducible and well-controlled three-dimensional (3D) environment suitable for either production of multiple or large size tissue constructs are attractive approaches to expand MSCs and obtain MSC-containing constructs of clinical grade. In these bioreactor systems, MSCs loaded onto scaffolds are exposed to fluid flow, a condition that provides both enhanced access to oxygen and nutrients as well as fluid-flow-driven
Summary. Shear stress and hydrostatic effects on the hMSCs early mechano gene response were similar. For the same magnitude gene response, the hydrostatic compression (1.5×10. 5. Pascal) is a 200000 times greater than the force exerted by shear stress (0.7 Pascal). Introduction. In the lab, a perfusion bioreactor designed to automate the production of bone constructs was developed. The proof of concept was established in a large animal model of clinical relevance. The cells perfused in the bioreactor are likely to perceive 2 types of stresses: shear stress and hydrostatic pressure. Optimization of this bioreactor implies a better understanding of the effects of these forces on the cells in order to have better proliferation and differentiation. An understanding of the response of one cell layer submit to various strength is relevant. The primary objective of this study was to test the hypothesis that hMSCs have the fundamental ability to distinguish between different types of mechanical signals as evidenced by distinct gene expression. The effect of shear stress on one cell layer cultures of hMSCs will be evaluated using a commercially available system called Ibidi. For the hydrostatic pressure as there is no commercial device available, our group has developed a prototype capable of delivering a well-defined mechanical loading to cells in culture. Validation of the techniques: In order to validate the systems (shear stress and cyclic pressure apparatus) used in this study, we have used an osteocytes-like cell line, MLO-Y4. When stimulated by a 30 minutes PFF at 7 dyn/cm. 2. or hydrostatic compression at 1.5 bar, cells responded by producing NO in the culture media. NO release after
Summary Statement. An organ culture experiment was simulated to explore the mechanisms that can link cell death to mechanical overload in the intervertebral disc. Coupling cell nutrition and tissue deformations led to altered metabolic transport that largely explained cell viability measurements. Introduction. Part of intervertebral disc (IVD) maintenance relies on limited nutrient availability to the cells and on mechanical loads, but effective implication of these two factors is difficult to quantify. Theoretical models have helped to understand the link between solute transport and cell nutrition in deforming IVD, but omitted the direct link between tissue mechanics and cell metabolism. Hence, we explored numerically the relation between disc mechanics and cell death in relation to an organ culture experiment. Methods. A finite element model of a caudal bovine IVD was created to reproduce an organ culture experiment. All subtissues were modelled, and coupled to cell metabolism in two ways: (i) mechanical strains and metabolic reactions were simply coupled to the diffusions of oxygen, lactate and glucose through a mechano-transport algorithm (IND model). (ii), a hypermetabolism model based on in vitro data involved a 30% increase in glucose consumption by the cells, activated either as a Step or as a Gaussian function over 15% strain (DIR model). Exponential decays of cell density occurred below 0.5 mM of glucose and/or below pH 6.78. Concentrations of 21 kPa oxygen and 4.5 mM glucose were imposed at the boundary, and a combination of 0.2 MPa compression and 10° bending was applied over 7 days. Results. The highest hypermetabolic response was given by the Step activation. For all models, cell death mostly occurred in the compressed area of the flexed IVD, and steady-state cell viability was reached in about two days of load. In the outer annulus fibrosus (AF), the DIR model with Step activation led to increased cell death, in line with the cell viability measured in vitro. In the inner AF, all cell viability results matched the reported measurements. Discussion/Conclusion. This study focused on elucidating the links between
Although effects of
Introduction: Homogenous cell distribution and suffi-cient initial scaffold stability remain key issues for successful tissue engineered osteochondral constructs. The purpose of this study was to investigate the application of initial compression forces during the first 24 hours of cell culture followed by different stress patterns. Methods: Bone marrow stromal cells were harvested from the iliac crest during routine trauma surgery. The cells were expanded in a 2-dimensional culture and then seeded into the biologic hybrid scaffold with a concentration of 1x10E6 cells per ml. Pressure and vacuum forces were applied in a specially developed glass kit. The constructs were exposed to two different protocols of compression combined as oteochondral matrices of CaReS (collagen I) and Tutobone (Ars Arthro, Esslingen, Germany and Tutogen Medical GmbH, Neunkirchen a. Br., Germany). Controls were resected osteochondral fragments from patients with articular fractures and uncompressed constructs. These effects were evaluated using light microscopy after standard staining to identify matrix penetration. Biomechanical tests were conducted, too using a modified biomechanical testing machine. The ‘constrained compression’, maximum load to failure, modulus, and strain energy density were determined. Results: Histology: Penetration and cell distribution was demonstrated homogenous and vital, respectively. Mechanical tests showed a significant enhancement of primary matrix stability. The following stress patterns did not enhance significantly stability over seven days. Discussion: The aim of this project was to investigate the response and cell distrubution of human bone marrow stromal cells seeded on a 3-dimensional biologic hybrid scaffold using compression and vacuum forces. The integration of
Background and objectives: Tenocytes change their structure, composition and mechanical properties to adapt to mechanical loading. Voltage gated and mecha-nosensitive ion channels may play a key role in human tenocytes to regulate some or all initial responses to
The purpose of the study was to test the hypothesis that cellular mechanisms of fibroblasts derived from primary frozen shoulder (PFS) exhibit similar activity in terms of contraction, response to cytokine transforming growth factor-beta1 (TGF beta1) and
The purpose of the study was to test the hypothesis that cellular mechanisms of fibroblasts derived from primary frozen shoulder(PFS) exhibit similar activity in terms of contraction, response to cytokine (transforming growth factor-beta1) and
The skeleton is tuned for sensing and responding to mechanical forces: a global bone strain moves the extra-cellular fluid through the lacunocanalicular network of compact bone, so gene expression of osteocytes is mechanically modulated by extra cellular fluid flow shear stress. Several studies showed that shear stress modulates bone cells gene expression: in vitro
Regenerative medicine techniques are currently being investigated to replace damaged cartilage. Critical to the success of these techniques is the ability to expand the initial population of cells while minimising de-differentiation to allow for hyaline cartilage to form. Three-dimensional culture systems have been shown to enhance the differentiation of chondrocytes in comparison to two-dimensional culture systems. Additionally, bioreactor expansion on microcarriers can provide
Objectives. In order to elucidate the influence of sympathetic nerves on
lumbar radiculopathy, we investigated whether sympathectomy attenuated
pain behaviour and altered the electrical properties of the dorsal
root ganglion (DRG) neurons in a rat model of lumbar root constriction. Methods. Sprague-Dawley rats were divided into three experimental groups.
In the root constriction group, the left L5 spinal nerve root was
ligated proximal to the DRG as a lumbar radiculopathy model. In
the root constriction + sympathectomy group, sympathectomy was performed
after the root constriction procedure. In the control group, no
procedures were performed. In order to evaluate the pain relief
effect of sympathectomy, behavioural analysis using
The pathogenesis of aseptic loosening of total joint prostheses is not clearly understood. Two features are associated with loosened prostheses, namely, particulate debris and movement of the implant. While numerous studies have evaluated the cellular response to particulate biomaterials, few have investigated the influence of movement of the implant on the biological response to particles. Our aim was therefore to test the hypothesis that excessive
INTRODUCTION. Osteoarthritis (OA) can be artificially simulated ex vivo on healthy articular cartilage (AC) samples by use of proteolytic enzymes. In this article we will present preliminary analyses of the physical degradation of AC when subjected to alternating mechanical stresses. Since AC damage due to OA is believed to be mechanically induced, the first step towards the realisation of an improved understanding of degenerative behaviour of AC under physiological loading conditions is to perform ex vivo tests which mimic such conditions at best. METHODS. Porcine AC was subjected to biochemical stimulation or left as native AC. Biochemical degradation was performed using combinations of trypsin and Matrix Metalloproteinases (MMPs) to induce the loss of proteoglycan and collagen. A comparison of the biochemical and mechanical properties, topography and difference in response to mechanical damage between the digested AC and healthy AC was made using White Light Interferometry (WLI), Atomic Force Microscopy (AFM) and mechanical testing. The mechanical damage was induced by subjecting AC to shear under physiological and non physiological conditions. The AC was mechanically tested in a Phosphate Buffered Saline (PBS) bath. After mechanical testing, biochemical analysis of the collagen and aggrecan content of the tissue and PBS present in the bath during the mechanical test was performed. Collagen content was determined by measurement of the amount of hydroxyproline (HPRO), and aggrecan content by the amount of glycosaminoglycans (GAG). The mechanical test was either performed on healthy (native) AC or on AC which had first been digested. RESULTS AND DISCUSSION. After mechanical testing, very small collagen damage and a very high ECM damage in the native AC following the mechanical test was observed. This seems to be in line with the development of AC damage during OA; the first part of the AC structure to be affected and damaged is the ECM. The collagen is believed to be more stable and degrades both mechanically and chemically only after the ECM has started degrading. Another possible explanation for this could be the fact that the collagen is able to resist shear stresses very well due to the fibrils being aligned parallel to the surface hence limiting the onset of damage. In the digested AC, both ECM and collagen damage are considerably higher since both parts of the structure have already been partially degraded. Experiments have also shown a dramatic decrease of interstitial fluid pressurisation in the digested samples hence exposing the solid constituent of AC to further degradation during mechanical testing. This could shed light on the nature of the progression of OA. CONCLUSIONS. This study allows us to better understand damage in AC and its effect on biomechanical, structural, biochemical properties and on the mechanical response of the tissue at physiological conditions. Future work will also include the use of Atomic Force Microscopy in order to characterise the surface and evaluate local mechanical properties using force – indentation curves.
Mechanical force is an osteoinductive factor that plays an important role in bone growth and repair in vivo (Carter et al. 1988). Many in vitro studies have shown that osteoblasts and osteocytes respond to mechanical loads such as stretch and fluid-flow induced shear stresses, with initiation of signalling pathways (Reilly et al 2003). The underlying mechanisms by which bone cells respond to mechanical signals are difficult to investigate in a 3-D environment, because of reduced nutrient delivery to cells and difficulties in analysis. We are developing a model to analyse the effects of mechanical compression on matrix forming osteoblasts in a 3-D system. Our model uses polyurethane (PU) open cell foam scaffolds, MLO-A5 osteoblast-like cells (Kato et al 2001) and a sterile fluid filled biodynamic loading chamber (Bose). We have shown using a cell proliferation assay (Promega) that cells survive well and proliferate in the PU scaffolds. Cell number after 15 days of culture was four times that after 5 days of culture. To examine the effect of
Aim: We hypothesized that anabolic steroid, combined with substrate strain upregulates expression of gap junction protein Connexin 43 (Cnx43) and increases cell-to-cell communication in human supraspinatus tendon cells. Methods: Human supraspinatus cells were isolated and cultured in nutrient media arranged into 4 groups: 1) non-load, non-steroid (NLNS, n=12); 2) non-load, steroid (NLS, n=12); 3) load, non-steroid (LNS, n=12); and 4) load, steroid (LS, n=12). Steroid and load groups were cultured in 100Nm nandrolone decanoate and loaded at 1% elongation daily for 5 days, respectively. On day five of treatment, cells examined for immunocytochemistry. Cells were also subjected to
Introduction: The response of osteoblasts to dexamethasone is dose-dependent. While low doses are used to stimulate osteoblasts to maintain their phenotype, high doses are cytotoxic. The purpose of this study was to test the hypothesis that
Osteoblastic cells response to mechanical forces by activating signal transduction cascades and altering gene expression patterns. We examined the responses of MC3T3E1 mouse osteoblasts to short term, low level (1000 microstrain, 1Hz) loads applied by cyclic deformation of the growth surface. At these load levels, daily short-term loading significantly retards the ascorbate induced differentiation of the cells as measured by alkaline phosphatase and osteopontin expression. This effect peaked at 5 minutes of loading per day; loads of 1 or more hours per day accelerated the differentiation process slightly as measured by the same criteria. C-fos is known to respond to mechanical loading of bones in vivo, we therefore examined the effect of brief loading bouts on c-fos promoter activity. Stable lines of MC3T3E1 cells carrying the fos promoter driving a luciferase reporter gene were loaded for 0, 5 or 60 minutes. For these experiments cells were grown in MEM without ascorbate and were then either supplemented or not with 37.5mM ascorbate-2-phosphate at confluence. In cells which had not been pre-treated with ascorbate the c-fos promoter was essentially unresponsive to loads. Following 24 hours of ascorbate treatment (placing these cells at the earliest stages differentiation) a 5 minute loading bout resulted in a marked (~ 50%) decrease in luciferase activity with a trough at 6–8 hours. Loading for 60 minutes caused a similar, but accelerated inhibition of luciferase activity with a trough at 2–4 hours after loading. 24 hours after loading, fos promoter activity had returned to baseline in cells loaded for 60 minutes but remained depressed at 75% of baseline in cells loaded for 5 minutes. Ets family transcription factors have been implicated in gene regulation in response to
Fibrinolysis plays a key transition step from haematoma formation to angiogenesis and fracture healing. Low-magnitude high-frequency vibration (LMHFV) is a non-invasive biophysical modality proven to enhance fibrinolytic factors. This study investigates the effect of LMHFV on fibrinolysis in a clinically relevant animal model to accelerate osteoporotic fracture healing. A total of 144 rats were randomized to four groups: sham control; sham and LMHFV; ovariectomized (OVX); and ovariectomized and LMHFV (OVX-VT). Fibrinolytic potential was evaluated by quantifying fibrin, tissue plasminogen activator (tPA), and plasminogen activator inhibitor-1 (PAI-1) along with healing outcomes at three days, one week, two weeks, and six weeks post-fracture.Aims
Methods
Bone is one of the most highly adaptive tissues in the body, possessing the capability to alter its morphology and function in response to stimuli in its surrounding environment. The ability of bone to sense and convert external mechanical stimuli into a biochemical response, which ultimately alters the phenotype and function of the cell, is described as mechanotransduction. This review aims to describe the fundamental physiology and biomechanisms that occur to induce osteogenic adaptation of a cell following application of a physical stimulus. Considerable developments have been made in recent years in our understanding of how cells orchestrate this complex interplay of processes, and have become the focus of research in osteogenesis. We will discuss current areas of preclinical and clinical research exploring the harnessing of mechanotransductive properties of cells and applying them therapeutically, both in the context of fracture healing and de novo bone formation in situations such as nonunion. Cite this article:
Proliferation, migration, and differentiation of anterior cruciate ligament (ACL) remnant and surrounding cells are fundamental processes for ACL reconstruction; however, the interaction between ACL remnant and surrounding cells is unclear. We hypothesized that ACL remnant cells preserve the capability to regulate the surrounding cells’ activity, collagen gene expression, and tenogenic differentiation. Moreover, extracorporeal shock wave (ESW) would not only promote activity of ACL remnant cells, but also enhance their paracrine regulation of surrounding cells. Cell viability, proliferation, migration, and expression levels of Collagen-I (COL-I) A1, transforming growth factor beta (TGF-β), and vascular endothelial growth factor (VEGF) were compared between ACL remnant cells untreated and treated with ESW (0.15 mJ/mm2, 1,000 impulses, 4 Hz). To evaluate the subsequent effects on the surrounding cells, bone marrow stromal cells (BMSCs)’ viability, proliferation, migration, and levels of Type I Collagen, Type III Collagen, and tenogenic gene (Aims
Methods
Low intensity pulsed ultrasound (SAFHS, Exogen Inc.) was used to treat 15 immature New Zealand white rabbits following a mid diaphyseal tibial osteotomy and 1cm bone lengthening using an Orthofix M-100 device. Fifteen matched controls underwent an identical procedure but the ultrasound transducer was not switched on. At 4 and 6 weeks postoperatively the tibiae were analysed using DXA, QCT and 4 point bend mechanical testing. There were no differences identified between the active and control groups at 4 or 6 weeks with respect to bone mineral content or cross-sectional area of the regenerate, nor the bone proximal and distal to it. No improvement in strength of the regenerate was identified in either group. We cannot, therefore, support the use of the SAFHS to accelerate bone healing in patients undergoing limb lengthening. Low intensity pulsed ultrasound has been shown to accelerate fracture healing in animals and humans. The mechanisms of action are discussed and we propose that the intensity of the ultrasound may need to be increased
The long head of the biceps (LHB) is often resected in shoulder surgery and could therefore serve as a cell source for tissue engineering approaches in the shoulder. However, whether it represents a suitable cell source for regenerative approaches, both in the inflamed and non-inflamed states, remains unclear. In the present study, inflamed and native human LHBs were comparatively characterized for features of regeneration. In total, 22 resected LHB tendons were classified into inflamed samples (n = 11) and non-inflamed samples (n = 11). Proliferation potential and specific marker gene expression of primary LHB-derived cell cultures were analyzed. Multipotentiality, including osteogenic, adipogenic, chondrogenic, and tenogenic differentiation potential of both groups were compared under respective lineage-specific culture conditions.Objectives
Methods
The aim of this study was to provide a comprehensive understanding of alterations in messenger RNAs (mRNAs), long noncoding RNAs (lncRNAs), and circular RNAs (circRNAs) in cartilage affected by osteoarthritis (OA). The expression profiles of mRNAs, lncRNAs, and circRNAs in OA cartilage were assessed using whole-transcriptome sequencing. Bioinformatics analyses included prediction and reannotation of novel lncRNAs and circRNAs, their classification, and their placement into subgroups. Gene ontology and pathway analysis were performed to identify differentially expressed genes (DEGs), differentially expressed lncRNAs (DELs), and differentially expressed circRNAs (DECs). We focused on the overlap of DEGs and targets of DELs previously identified in seven high-throughput studies. The top ten DELs were verified by quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) in articular chondrocytes, both Objectives
Methods
The purpose of this study was to create a novel The metatarsophalangeal joints of 12 fresh cadaveric bovine feet were skinned and dissected aseptically, and cultured for up to four weeks. Dynamic movement was applied using a custom-made machine on six joints, with the others cultured under static conditions. Chondrocyte viability and matrix glycosaminoglycan (GAG) content were evaluated by the cell viability probes, 5-chloromethylfluorescein diacetate (CMFDA) and propidium iodide (PI), and dimethylmethylene blue (DMMB) assay, respectively.Objectives
Methods
Osteoporosis is a metabolic disease resulting in progressive loss of bone mass as measured by bone mineral density (BMD). Physical exercise has a positive effect on increasing or maintaining BMD in postmenopausal women. The contribution of exercise to the regulation of osteogenesis in osteoblasts remains unclear. We therefore investigated the effect of exercise on osteoblasts in ovariectomized mice. We compared the activity of differentially expressed genes of osteoblasts in ovariectomized mice that undertook exercise (OVX+T) with those that did not (OVX), using microarray and bioinformatics.Objectives
Methods
Despite its intrinsic ability to regenerate form and function after injury, bone tissue can be challenged by a multitude of pathological conditions. While innovative approaches have helped to unravel the cascades of bone healing, this knowledge has so far not improved the clinical outcomes of bone defect treatment. Recent findings have allowed us to gain in-depth knowledge about the physiological conditions and biological principles of bone regeneration. Now it is time to transfer the lessons learned from bone healing to the challenging scenarios in defects and employ innovative technologies to enable biomaterial-based strategies for bone defect healing. This review aims to provide an overview on endogenous cascades of bone material formation and how these are transferred to new perspectives in biomaterial-driven approaches in bone regeneration. Cite this article: T. Winkler, F. A. Sass, G. N. Duda, K. Schmidt-Bleek. A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering: The unsolved challenge.
Osteoporosis is a systemic skeletal disorder characterized by reduced bone mass and deterioration of bone microarchitecture, which results in increased bone fragility and fracture risk. Casein kinase 2-interacting protein-1 (CKIP-1) is a protein that plays an important role in regulation of bone formation. The effect of CKIP-1 on bone formation is mainly mediated through negative regulation of the bone morphogenetic protein pathway. In addition, CKIP-1 has an important role in the progression of osteoporosis. This review provides a summary of the recent studies on the role of CKIP-1 in osteoporosis development and treatment.
The role of mechanical stress and transforming growth factor beta 1 (TGF-β1) is important in the initiation and progression of osteoarthritis (OA). However, the underlying molecular mechanisms are not clearly known. In this study, TGF-β1 from osteoclasts and knee joints were analyzed using a co-cultured cell model and an OA rat model, respectively. Five patients with a femoral neck fracture (four female and one male, mean 73.4 years (68 to 79)) were recruited between January 2015 and December 2015. Results showed that TGF-β1 was significantly upregulated in osteoclasts by cyclic loading in a time- and dose-dependent mode. The osteoclasts were subjected to cyclic loading before being co-cultured with chondrocytes for 24 hours.Objectives
Methods
Many Specific keywords were used to search electronic databases (EMBASE, PubMed, and Web of Science) for English-language literature published between 1995 and 2017.Objectives
Methods
The objective of this study was to investigate bone healing after
internal fixation of displaced femoral neck fractures (FNFs) with
the Dynamic Locking Blade Plate (DLBP) in a young patient population
treated by various orthopaedic (trauma) surgeons. We present a multicentre prospective case series with a follow-up
of one year. All patients aged ≤ 60 years with a displaced FNF treated
with the DLBP between 1st August 2010 and December 2014 were included.
Patients with pathological fractures, concomitant fractures of the
lower limb, symptomatic arthritis, local infection or inflammation,
inadequate local tissue coverage, or any mental or neuromuscular
disorder were excluded. Primary outcome measure was failure in fracture
healing due to nonunion, avascular necrosis, or implant failure
requiring revision surgery.Aims
Patients and Methods
Construction of a functional skeleton is accomplished
through co-ordination of the developmental processes of chondrogenesis,
osteogenesis, and synovial joint formation. Infants whose movement Cite this article:
Cite this article: A. A. Abubakar, M. M. Noordin, T. I. Azmi, U. Kaka, M. Y. Loqman. The use of rats and mice as animal models in
Salubrinal is a synthetic agent that elevates phosphorylation
of eukaryotic translation initiation factor 2 alpha (eIF2α) and
alleviates stress to the endoplasmic reticulum. Previously, we reported
that in chondrocytes, Salubrinal attenuates expression and activity
of matrix metalloproteinase 13 (MMP13) through downregulating nuclear
factor kappa B (NFκB) signalling. We herein examine whether Salubrinal
prevents the degradation of articular cartilage in a mouse model
of osteoarthritis (OA). OA was surgically induced in the left knee of female mice. Animal
groups included age-matched sham control, OA placebo, and OA treated
with Salubrinal or Guanabenz. Three weeks after the induction of
OA, immunoblotting was performed for NFκB p65 and p-NFκB p65. At
three and six weeks, the femora and tibiae were isolated and the sagittal
sections were stained with Safranin O.Objectives
Methods
A rat model of lumbar root constriction with an additional sympathectomy in some animals was used to assess whether the sympathetic nerves influenced radicular pain. Behavioural tests were undertaken before and after the operation. On the 28th post-operative day, both dorsal root ganglia and the spinal roots of L4 and L5 were removed, frozen and sectioned on a cryostat (8 μm to 10 μm). Immunostaining was then performed with antibodies to tyrosine hydroxylase (TH) according to the Avidin Biotin Complex method. In order to quantify the presence of sympathetic nerve fibres, we counted TH-immunoreactive fibres in the dorsal root ganglia using a light microscope equipped with a micrometer graticule (10 x 10 squares, 500 mm x 500 mm). We counted the squares of the graticule which contained TH-immunoreactive fibres for each of five randomly-selected sections of the dorsal root ganglia. The root constriction group showed mechanical allodynia and thermal hyperalgesia. In this group, TH-immunoreactive fibres were abundant in the ipsilateral dorsal root ganglia at L5 and L4 compared with the opposite side. In the sympathectomy group, mechanical hypersensitivity was attenuated significantly. We consider that the sympathetic nervous system plays an important role in the generation of radicular pain.
The April 2012 Foot &
Ankle Roundup360 looks at injecting the tendon sheath, total ankle replacement, heterotopic ossification, replacement or arthrodesis, achilles tendinopathy, healing of the torn Achilles, grafting of the calcaneal bone cyst, avulsion fractures in athletes, percutaneous distal osteotomy for bunionette formation, and repairing the torn tibiofibular syndesmosis
In this paper, we consider wound healing after
total knee arthroplasty.
This study was designed to test the hypothesis
that the sensory innervation of bone might play an important role
in sensing and responding to low-intensity pulsed ultrasound and
explain its effect in promoting fracture healing. In 112 rats a
standardised mid-shaft tibial fracture was created, supported with
an intramedullary needle and divided into four groups of 28. These
either had a sciatic neurectomy or a patellar tendon resection as
control, and received the ultrasound or not as a sham treatment.
Fracture union, callus mineralisation and remodelling were assessed using
plain radiography, peripheral quantitative computed tomography and
histomorphology. Daily ultrasound treatment significantly increased the rate of
union and the volumetric bone mineral density in the fracture callus
in the neurally intact rats (p = 0.025), but this stimulating effect
was absent in the rats with sciatic neurectomy. Histomorphology
demonstrated faster maturation of the callus in the group treated
with ultrasound when compared with the control group. The results
supported the hypothesis that intact innervation plays an important
role in allowing low-intensity pulsed ultrasound to promote fracture
healing.
Failure of bone repair is a challenging problem in the management of fractures. There is a limited supply of autologous bone grafts for treating nonunions, with associated morbidity after harvesting. There is need for a better source of cells for repair. Mesenchymal stem cells (MSCs) hold promise for healing of bone because of their capacity to differentiate into osteoblasts and their availability from a wide variety of sources. Our review aims to evaluate the available clinical evidence and recent progress in strategies which attempt to use autologous and heterologous MSCs in clinical practice, including genetically-modified MSCs and those grown on scaffolds. We have compared various procedures for isolating and expanding a sufficient number of MSCs for use in a clinical setting. There are now a number of clinical studies which have shown that implantation of MSCs is an effective, safe and durable method for aiding the repair and regeneration of bone.
We have previously shown that joint distraction and movement with a hinged external fixation device for 12 weeks was useful for repairing a large articular cartilage defect in a rabbit model. We have now investigated the results after six months and one year. The device was applied to 16 rabbits who underwent resection of the articular cartilage and subchondral bone from the entire tibial plateau. In group A (nine rabbits) the device was applied for six months. In group B (seven rabbits) it was in place for six months, after which it was removed and the animals were allowed to move freely for an additional six months. The cartilage remained sound in all rabbits. The areas of type II collagen-positive staining and repaired soft tissue were larger in group B than in group A. These findings provide evidence of long-term persistence of repaired cartilage with this technique and that weight-bearing has a positive effect on the quality of the cartilage.
We have developed an animal model to examine the formation of heterotopic ossification using standardised muscular damage and implantation of a beta-tricalcium phosphate block into a hip capsulotomy wound in Wistar rats. The aim was to investigate how cells originating from drilled femoral canals and damaged muscles influence the formation of heterotopic bone. The femoral canal was either drilled or left untouched and a tricalcium phosphate block, immersed either in saline or a rhBMP-2 solution, was implanted. These implants were removed at three and 21 days after the operation and examined histologically, histomorphometrically and immunohistochemically. Bone formation was seen in all implants in rhBMP-2-immersed, whereas in those immersed in saline the process was minimal, irrespective of drilling of the femoral canals. Bone mineralisation was somewhat greater in the absence of drilling with a mean mineralised volume to mean total volume of 18.2% ( Our findings suggest that osteoinductive signalling is an early event in the formation of ectopic bone. If applicable to man the results indicate that careful tissue handling is more important than the prevention of the dissemination of bone cells in order to avoid heterotopic ossification.
We describe the management of nonunion combined with limb-length discrepancy following vascularised fibular grafting for the reconstruction of long-bone defects in the lower limb after resection of a tumour in skeletally immature patients. We operated on nine patients with a mean age of 13.1 years (10.5 to 14.5) who presented with a mean limb-length discrepancy of 7 cm (4 to 9) and nonunion at one end of a vascularised fibular graft, which had been performed previously, to reconstruct a bone defect after resection of an osteosarcoma. Reconstruction was carried out using a ring fixator secured with correction by half pins of any malalignment, compression of the site of nonunion and lengthening through a metaphyseal parafocal osteotomy without bone grafting. The expected limb-length discrepancy at maturity was calculated using the arithmetic method. Solid union and the intended leg length were achieved in all the patients. Excessive scarring and the distorted anatomy from previous surgery in these patients required other procedures to be performed with minimal exposures and dissection in order to avoid further compromise to the vascularity of the graft or damage to neurovascular structures. The methods which we chose were simple and effective in addressing these complex problems.
The haematoma occurring at the site of a fracture is known to play an important role in bone healing. We have recently shown the presence of progenitor cells in human fracture haematoma and demonstrated that they have the capacity for multilineage mesenchymal differentiation. There have been many studies which have shown that low-intensity pulsed ultrasound (LIPUS) stimulates the differentiation of a variety of cells, but none has investigated the effects of LIPUS on cells derived from human fracture tissue including human fracture haematoma-derived progenitor cells (HCs). In this
Femoral impaction bone allografting has been developed as a means of restoring bone stock in revision total hip replacement. We report the results of 75 consecutive patients (75 hips) with a mean age of 68 years (35 to 87) who underwent impaction grafting using the Exeter collarless, polished, tapered femoral stem between 1992 and 1998. The mean follow-up period was 10.5 years (6.3 to 14.1). The median pre-operative bone defect score was 3 (interquartile range (IQR) 2 to 3) using the Endo-Klinik classification. The median subsidence at one year post-operatively was 2 mm (IQR 1 to 3). At the final review the median Harris hip score was 80.6 (IQR 67.6 to 88.9) and the median subsidence 2 mm (IQR 1 to 4). Incorporation of the allograft into trabecular bone and secondary remodelling were noted radiologically at the final follow-up in 87% (393 of 452 zones) and 40% (181 of 452 zones), respectively. Subsidence of the Exeter stem correlated with the pre-operative Endo-Klinik bone loss score (p = 0.037). The degree of subsidence at one year had a strong association with long-term subsidence (p <
0.001). There was a significant correlation between previous revision surgery and a poor Harris Hip score (p = 0.028), and those who had undergone previous revision surgery for infection had a higher risk of complications (p = 0.048). Survivorship at 10.5 years with any further femoral operation as the end-point was 92% (95% confidence interval 82 to 97).
Thrombin has many biological properties similar to those of growth factors. In a previous study, we showed that thrombin improves healing of the rat tendo Achillis. Low molecular weight heparin (LMWH) inhibits the activity and the generation of thrombin. We therefore considered that LMWH at a thromboprophylactic dose might inhibit tendon repair. Transection of the tendo Achillis was carried out in 86 rats and the healing tested mechanically. Low molecular weight heparin (dalateparin) was either injected a few minutes before the operation and then given continuously with an osmotic mini pump for seven days, or given as one injection before the operation. In another experiment ,we gave LMWH or a placebo by injection twice daily. The anti-factor Xa activity was analysed. Continuous treatment with LMWH impaired tendon healing. After seven days, this treatment caused a 33% reduction in force at failure, a 20% reduction in stiffness and a 67% reduction in energy uptake. However, if injected twice daily, LMWH had no effect on tendon healing. Anti-factor Xa activity was increased by LMWH treatment, but was normal between intermittent injections. Low molecular weight heparin delays tendon repair if given continuously, but not if injected intermittently, probably because the anti-factor Xa activity between injections returns to normal, allowing sufficient thrombin stimulation for repair. These findings indicate the need for caution in the assessment of long-acting thrombin and factor Xa inhibitors.
