This paper describes the methodology, validation and reliability
of a new computer-assisted method which uses models of the patient’s
bones and the components to measure their migration and polyethylene
wear from radiographs after total hip arthroplasty (THA). Models of the patient’s acetabular and femoral component obtained
from the manufacturer and models of the patient’s pelvis and femur
built from a single computed tomography (CT) scan, are used by a
computer program to measure the migration of the components and
the penetration of the femoral head from anteroposterior and lateral radiographs
taken at follow-up visits. The program simulates the radiographic
setup and matches the position and orientation of the models to
outlines of the pelvis, the acetabular and femoral component, and
femur on radiographs. Changes in position and orientation reflect
the migration of the components and the penetration of the femoral
head. Validation was performed using radiographs of phantoms simulating
known migration and penetration, and the clinical feasibility of
measuring migration was assessed in two patients.Aims
Materials and Methods
As patient data continues to grow, the importance of efficient and precise
The use of routine sampling for histological
Gait
Primary hip and knee joint replacements in Canada have been estimated to cost over $1.4 billion dollars annually, with revision surgery costing $177 million. The most common cause of revision arthroplasty surgery in Canada is infection. Periprosthetic joint infections (PJIs) are a devastating though preventable complication following arthroplasty. Though variably used, antibiotic laden bone cement (ALBC) has been demonstrated to decrease PJIs following primary total knee arthroplasty (TKA). Unfortunately, ALBC is costlier than regular bone cement (RBC). Therefore, the aim of this study was to determine if the routine use of ALBC in primary TKA surgery is a cost-effective practice from the perspective of the Canadian healthcare system. A decision tree was constructed using a decision
For many years, marker-based systems have been used for motion
Non-linear methods in statistical shape
Abstract. Background. Oxidized zirconium (OxZr) has been introduced as an alternative bearing for femoral components in Total Knee Arthroplasty (TKA). It has a ceramic-like zirconium oxide outer layer with a low coefficient of friction. Early studies have found OxZr TKA to have a low incidence of early failure in young high demand patients. Currently no study has reported on the outcome of these implants beyond ten years. Objectives. The purpose of our study was to present an in-depth 15-year survival
Dual mobility (DM) total hip replacements (THRs) were introduced to reduce dislocation risk, which is the most common cause of early revision. Although DM THRs have shown good overall survivorship and low dislocation rates, the mechanisms which describe how these bearings function in-vivo are not fully understood. Therefore, the study aim was to comprehensively assess retrieved DM polyethylene liners for signs of damage using visual inspection and semi-quantitative geometric assessment methods. Retrieved DM liners (n=18) were visually inspected for the presence of surface damage, whereby the internal and external surfaces were independently assigned a score of one (present) or zero (not present) for seven damage modes. The severity of damage was not assessed. The material composition of embedded debris was characterised using energy-dispersive x-ray
Aims. The conventionally described mechanism of distal biceps tendon rupture (DBTR) is of a ‘considerable extension force suddenly applied to a resisting, actively flexed forearm’. This has been commonly paraphrased as an ‘eccentric contracture to a flexed elbow’. Both definitions have been frequently used in the literature with little objective
Dual Mobility (DM) Total Hip Replacements (THRs) were introduced to reduce dislocation risk, which is the most common cause of early revision. The in-vivo mechanics of these implants is not well understood, despite their increased use in both elective and trauma settings. Therefore, the aim of this study was to comprehensively assess retrieved DM polyethylene liners for signs of damage using visual inspection and semi-quantitative geometric assessment techniques. Retrieved DM liners (n=20) were visually inspected for the presence of seven established modes of polyethylene damage. If embedded debris was identified on the external surface, its material composition was characterised using energy-dispersive x-ray
Progressive collapsing foot deformity (PCFD) is a common condition with an estimated prevalence of 3.3% in women greater than 40 years. Progressive in nature, symptomatic flatfoot deformity can be a debilitating condition due to pain and limited physical function; it has been shown to have one of the poorest preoperative patient reported outcome scores in foot and ankle pathologies, second to ankle arthritis. Operative reconstruction of PCFD can be performed in a single-stage manner or through multiple stages. The purpose of this study is to compare costs for non-staged (NS) flatfoot reconstructions, which typically require longer hospital stays, with costs for staged (S) reconstructions, where patients usually do not require hospital admission. To our knowledge, the comparison between single-staged and multi-staged flatfoot reconstructions has not been previously done. This study will run in conjunction with one that compares rates of complications and reoperation, as well as patient reported outcomes on function and pain associated with S and NS flatfoot reconstruction. Overall, the goal is to optimize surgical management of PCFD, by addressing healthcare costs and patient outcomes. At our academic centre with foot and ankle specialists, we selected one surgeon who primarily performs NS flatfoot reconstruction and another who primarily performs S procedures. Retrospective chart reviews of patients who have undergone either S or NS flatfoot reconstruction were performed from November 2011 to August 2021. Length of operating time, number of primary surgeries, length of hospital admission, and number of reoperations were recorded. Cost
Aims. Total hip arthroplasty (THA) and total knee arthroplasty (TKA) are common orthopaedic procedures requiring postoperative radiographs to confirm implant positioning and identify complications. Artificial intelligence (AI)-based image
The aim of this study was to assess the incidence the microbiological spectrum and clinical outcome of hip and knee revision arthroplasties with unexpected-positive-intraoperative-cultures (UPIC) at a single center with minimum follow up of 2 years. We retrospectively analyzed our prospectively maintained institutional arthroplasty registry. Between 2011 and 2020 we performed presumably aseptic rTHA (n=939) and rTKA (n= 1,058). Clinical outcome, re-revision rates and causes as well as the microbiological spectrum were evaluated.Aims
Methods
Introduction. The PACE trial was the first randomized controlled trial (RCT) investigating the efficacy of paracetamol in acute low back pain. Non-compliance to study medication was considered to be a limitation of this RCT. In contrast to conventional statistical methods, complier average causal effects (CACE)
Introduction. The accuracy of hexapod circular external fixator deformity correction is contingent on the precision of radiographic
µCT images are commonly analysed to assess changes in bone density and architecture in preclinical murine models. Several platforms provide automated
Abstract. Objectives. While spinal fusion is known to be associated with adjacent disc degeneration, little is known on the role of the facet joints in the process, and whether their altered biomechanics following fusion plays a role in further spinal degeneration. This work aimed to develop a model and method to sequentially measure the effects of spinal fusion on lumbar facet joints through synchronisation of both motion
Aims. The aim of this study was to present the first retrieval
Aims. The standard of surgical treatment for lower limb neoplasms had been characterized by highly interventional techniques, leading to severe kinetic impairment of the patients and incidences of phantom pain. Rotationplasty had arisen as a potent limb salvage treatment option for young cancer patients with lower limb bone tumours, but its impact on the gait through comparative studies still remains unclear several years after the introduction of the procedure. The aim of this study is to assess the effect of rotationplasty on gait parameters measured by gait
Reduced cervical spine canal AP diameter is linked to the development of spinal cord injury and myelopathy. This is of particular interest to clinicians in New Zealand, given a unique socio-ethnic make-up and prevalent participation in collision sport. Our study builds upon previous unpublished evidence, by analysing normal cervical spine CT scans to explore morphological differences in the sub-axial cervical spine canal, between New Zealand European, Māori and Paciāca individuals. 670 sub-axial cervical vertebrae (C3-C7) were analysed radiographically using high resolution CT trauma scans, showing no acute pathology with respect to the cervical spine. All measurements were made uPlising mulP-planar reconstruction software to obtain slices parallel to the superior endplate at each vertebral level. Maximal canal diameter was measured in the AP and transverse planes. Statistical
Finite element
In 2020 almost 90% of femoral heads for total hip implants in Germany were made of ceramic. Nevertheless, the cellular interactions and abrasion mechanisms in vivo have not been fully understood until now. Metal transfer from the head-neck taper connection, occurring as smear or large-area deposit, negatively influences the surface quality of the articulating bearing. In order to prevent metal transfer, damage patterns of 40 Biolox delta ceramic retrievals with CoC and CoPE bearings were analysed. A classification of damage type and severity for each component (n=40) was done according to an established scoring system. To investigate the physical properties, the surface quality was measured using confocal microscopy, quantitative
Objectives. Understanding lumbar facet joint involvement and biomechanical changes post spinal fusion is limited. This study aimed to establish an in vitro model assessing mechanical effects of fusion on human lumbar facet joints, employing synchronized motion, pressure, and stiffness
Aims. The aim of this study was to evaluate the optimal deep tissue specimen sample number for histopathological
Introduction. Anterior cruciate ligament reconstruction (ACLr) is the most widely published operation in the orthopaedic literature. Over recent years there has been increased interest in the surgical technique and role of concomitant procedures performed during ACLr. The National Ligament Registry (NLR) collects robust data on ACLr performed in the UK. In this registry
Aims. To perform an incremental cost-utility
Aims. Impaired fracture repair in patients with type 2 diabetes mellitus (T2DM) is not fully understood. In this study, we aimed to characterize the local changes in gene expression (GE) associated with diabetic fracture. We used an unbiased approach to compare GE in the fracture callus of Zucker diabetic fatty (ZDF) rats relative to wild-type (WT) littermates at three weeks following femoral osteotomy. Methods. Zucker rats, WT and homozygous for leptin receptor mutation (ZDF), were fed a moderately high-fat diet to induce T2DM only in the ZDF animals. At ten weeks of age, open femoral fractures were simulated using a unilateral osteotomy stabilized with an external fixator. At three weeks post-surgery, the fractured femur from each animal was retrieved for
Aims. The metabolic variations between the cartilage of osteoarthritis (OA) and Kashin-Beck disease (KBD) remain largely unknown. Our study aimed to address this by conducting a comparative
Aims. To compare the cost-effectiveness of high-dose, dual-antibiotic cement versus single-antibiotic cement for the treatment of displaced intracapsular hip fractures in older adults. Methods. Using data from a multicentre randomized controlled trial (World Hip Trauma Evaluation 8 (WHiTE-8)) in the UK, a within-trial economic evaluation was conducted. Resource usage was measured over 120 days post randomization, and cost-effectiveness was reported in terms of incremental cost per quality-adjusted life year (QALY), gained from the UK NHS and personal social services (PSS) perspective in the base-case
For clinical movement
Aim. Multidisciplinary team (MDT) management of complex bone and joint infections (BJI) is increasingly implemented but studies evaluating this approach are scarce. We assessed the effectiveness of our MDT by analyzing the adherence to its treatment decisions. Method. A cohort study was conducted comprising patients with complex BJI of which the management was discussed during MDT meetings between 2015 and 2022 in a tertiary care academic hospital. Patient characteristics and MDT data were obtained from electronic patient records. Results. The
Pelvic tilt (PT) is always described as the pelvic orientation along the transverse axis, yet four PT definitions were established based on different radiographic landmarks: anterior pelvic plane (PT. a. ), the centres of femoral heads and sacral plate (PT. m. ), pelvic outlet (PT. h. ), and sacral slope (SS). These landmarks quantify a similar concept, yet understanding of their relationships is lacking. Some studies referred to the words “pelvic tilt” for horizontal comparisons, but their PT definitions might differ. There is a demand for understanding their correlations and differences for education and research purposes. This study recruited 105 sagittal pelvic radiographs (68 males and 37 females) from a single clinic awaiting their hip surgeries. Hip hardware and spine pathologies were examined for sub-group
Aims. The aim of this study was to compare the cost-effectiveness of cemented hemiarthroplasty (HA) versus hydroxyapatite-coated uncemented HA for the treatment of displaced intracapsular hip fractures in older adults. Methods. A within-trial economic evaluation was conducted based on data collected from the World Hip Trauma Evaluation 5 (WHiTE 5) multicentre randomized controlled trial in the UK. Resource use was measured over 12 months post-randomization using trial case report forms and participant-completed questionnaires. Cost-effectiveness was reported in terms of incremental cost per quality-adjusted life year (QALY) gained from the NHS and personal social service perspective. Methodological uncertainty was addressed using sensitivity
Abstract. Objective. Up to 20% of patients can remain dissatisfied following TKR. A proportion of TKRs will need early revision with aseptic loosening the most common. The ATTUNE TKR was introduced in 2011 as successor to its predicate design The PFC Sigma (DePuy Synthes, Warsaw, In). However, following reports of early failures of the tibial component there have been ongoing concerns of increased loosening rates with the ATTUNE TKR. In 2017 a redesigned tibial baseplate (S+) was introduced, which included cement pockets and an increased surface roughness to improve cement bonding. Given the concerns of early tibial loosening with the ATTUNE knee system, this study aimed to compare revision rates and those specific to aseptic loosening of the ATTUNE implant in comparison to an established predicate as well as other implant designs used in a high-volume arthroplasty centre. Methods. The Attune TKR was introduced to our unit in December 2011. Prior to this we routinely used a predicate design with an excellent long-term track record (PFC Sigma) which remains in use. In addition, other designs were available and used as per surgeon preference. Using a prospectively maintained database, we identified 10,202 patients who underwent primary cemented TKR at our institution between 01/04/2003–31/03/2022 with a minimum of 1 year follow-up (Mean 8.4years, range 1–20years): 1) 2406 with ATTUNE TKR (of which 557 were S+) 2) 4652 with PFC TKR 3) 3154 with other cemented designs. All implants were cemented using high viscosity cement. The primary outcome measures were all-cause revision, revision for aseptic loosening, and revision for tibial loosening. Kaplan-Meier survival analysis and Cox regression models were used to compare the primary outcomes between groups. Matched cohorts were selected from the ATTUNE subsets (original and S+) and PFC groups using the nearest neighbor method for radiographic
3D printing acetabular cups offers the theoretical advantage of enhanced bony fixation due to greater design control of the porous implant surfaces. Analysing retrieved 3D printed implants can help determine whether this design intent has been achieved. We sectioned 14 off-the-shelf retrieved acetabular cups for histological
X-Linked Hypophosphataemia (XLH) is a rare, progressive, hereditary phosphate-wasting disorder characterised by excessive activity of fibroblast growth factor 23. The International XLH Registry was established to provide information on the natural history of XLH and impact of treatment on patient outcomes. The cross-sectional orthopaedic data presented are from the first interim
Aims. The aim of this study is to report the implant survival and factors associated with revision of total elbow arthroplasty (TEA) using data from the Dutch national registry. Methods. All TEAs recorded in the Dutch national registry between 2014 and 2020 were included. The Kaplan-Meier method was used for survival
Aim. The aim of our study was to analyze putative genes for virulence factors of Cutibacterium isolates obtained from implant-associated infections. Methods. We analyzed 64 isolates of Cutibacterium spp. (C. acnes (53/64), C. avidum (6/64), C. granulosum (4/64), C. namnetense (1/64)) using NextSeq 550 (Illumina, San Diego, CA, USA) and performed genomic
Functional outcomes are important for patients with bone tumors undergoing lower extremity endoprosthetic reconstruction; however, there is limited empirical evidence evaluating function longitudinally. The objective of this study was to determine the changes in function over time in patients undergoing endoprosthetic reconstructions of the proximal femur, distal femur and proximal tibia. We conducted a secondary
Aims. The risk of mechanical failure of modular revision hip stems is frequently mentioned in the literature, but little is currently known about the actual clinical failure rates of this type of prosthesis. The current retrospective long-term
Aims. Insufficient treatment response in rheumatoid arthritis (RA) patients requires novel treatment strategies to halt disease progression. The potential benefit of combination of cytokine-inhibitors in RA is still unclear and needs further investigation. To explore the impact of combined deficiency of two major cytokines, namely interleukin (IL)-1 and IL-6, in this study double deficient mice for IL-1αβ and IL-6 were investigated in different tumour necrosis factor (TNF)-driven inflammatory bone disorders, namely peripheral arthritis and sacroiliitis, as well as systemic bone loss. Methods. Disease course, histopathological features of arthritis, and micro-CT (µCT) bone
The pathophysiological basis of alterations in trabecular bone of patients with osteonecrosis of the femoral head (ONFH) remains unclear. ONFH has classically been considered a vascular disease with secondary changes in the subchondral bone. However, there is increasing evidence suggesting that ONFH could be a bone disease, since alterations in the functionality of bone tissue distant from the necrotic lesion have been observed. We comparatively studied the transcriptomic profile of trabecular bone obtained from the intertrochanteric region of patients with ONFH without an obvious aetiological factor, and patients with osteoarthritis (OA) undergoing total hip replacement in our Institution. To explore the biological processes that could be affected by ONFH, we compared the transcriptomic profile of trabecular bone from the intertrochanteric region and the femoral head of patients affected by this condition. Differential gene expression was studied using an Affymetrix microarray platform. Transcriptome
Introduction. Pes cavovarus is a foot deformity that can be idiopathic (I-PC) or acquired secondary to other pathology. Charcot-Marie-Tooth disease (CMT) is the most common adult cause for acquired pes cavovarus deformity (CMT-PC). The foot morphology of these distinct patient groups has not been previously investigated. The aim of this study was to assess if morphological differences exist between CMT-PC, I-PC and normal feet (controls) using weightbearing computed tomography (WBCT). Methods. A retrospective
Distal interphalangeal joint (DIPJ) fusion using a k-wire has been the gold standard treatment for DIPJ arthritis. Recent studies have shown similar patient outcomes with the headless compression screws (HCS), however there has been no cost
Introduction. Anterior cruciate ligament (ACL) injuries are one of the most common knee injuries amongst elite athletes and usually require an ACL reconstruction (ACLR) to enable return to sport. Secondary surgery can result in a longer rehabilitation period and often a. significant time away from sport which can have implications to the athlete including contract obligations and sponsorship. Advances in ACLR techniques and meniscal repair techniques as well as an awareness of meniscal root lesions, ramp lesions and lateral extraarticular procedures (LEAPs) during ACL surgery has improved outcomes. The purpose of this study was to evaluate the rates of secondary surgery following the introduction of a systematic arthroscopic evaluation of the knee, improved meniscal repair techniques and the addition of a concomitant LEAP This systematic approach was introduced after October 2012 (10/2012). Methods. Professional athletes who underwent primary ACLR with a minimum follow-up of 2 years were identified from the (blinded for review). Those who had undergone major concomitant procedures such as multi-ligament reconstruction or osteotomy were excluded.
Aims. The aim of this study was to compare the cost-effectiveness of surgical fixation with Kirschner (K-)wire ersus moulded casting after manipulation of a fracture of the distal radius in an operating theatre setting. Methods. An economic evaluation was conducted based on data collected from the Distal Radius Acute Fracture Fixation Trial 2 (DRAFFT2) multicentre randomized controlled trial in the UK. Resource use was collected at three, six, and 12 months post-randomization using trial case report forms and participant-completed questionnaires. Cost-effectiveness was reported in terms of incremental cost per quality-adjusted life year (QALY) gained from an NHS and personal social services perspective. Sensitivity analyses were conducted to examine the robustness of cost-effectiveness estimates, and decision uncertainty was handled using confidence ellipses and cost-effectiveness acceptability curves. Results. In the base case
The Adams-Berger reconstruction is an effective technique for treating distal radioulnar joint (DRUJ) instability. Graft preparation techniques vary amongst surgeons with insufficient evidence to support one technique over another. Our study evaluated the biomechanical properties of four graft preparation techniques. Extensor tendons were harvested from fresh frozen porcine trotters obtained from a local butcher shop and prepared in one of three configurations (n=5 per group): tendon only; tendon prepared with non-locking, running suture (2-0 FiberLoop, Arthrex, Naples, FL) spaced at 6 mm intervals; and tendon prepared with suture spaced at 12 mm intervals. A fourth configuration of suture alone was also tested. Tendons were allocated in a manner to ensure comparable average diameters amongst groups. Biomechanical testing occurred using custom jigs simulating radial and ulnar tunnels attached to a Bose Electroforce 3510 mechanical testing machine (TA Instruments). After being woven through the jigs, all tendons were sutured end-to-end with 2-0 PROLENE suture (Ethicon). Tendons then underwent a staircase cyclic loading protocol (5-25 Newtons [N] at 1 hertz [Hz] for 1000 cycles, then 5-50 N at 1 Hz for 1000 cycles, then 5-75 N at 1 Hz for 1000 cycles) until graft failure; if samples did not fail during the protocol, they were then loaded to failure. Samples were visually inspected for mode of failure after the protocol. A one-way
Aim. Periprosthetic joint infections (PJI) and surgical site infections (SSI) are one of the most severe complications in joint arthroplasty. Decolonization measures prior to elective orthopedic surgeries have shown to reduce the risk of infection especially in patient identified as carriers of S. aureus. However additional screening measures can be difficult to implement in daily routine. The objective was to study the influence of universal decolonization with polihaxanid on SSI rates. Method. Between January 2017 and December 2018 patients scheduled for hip or knee joint arthroplasty in 5 participating orthopedic centers received polyhexanid containing decolonization set consisting of oral, nasal and wipes. Patients were instructed to perform a 5 day decolonization regimen 4 days prior to surgery. SSIs were recorded according to modified CDC criteria for a surveillance period of 90days after surgery. Results. During the study period, 4437 decolonization sets were distributed to patients. 1869 patients consented to participate in the study and provide detailed feedback on compatibility and compliance. Overall SSI rate was 0.87 per 100 surgeries prior to introduction of the decolonization, while it was 0.97 per 100 surgeries during the period of decolonization and 0.59 per 100 surgeries in those using the decolonization set. SSI rates due to Staphylococcus aureus were 0.32 per 100 surgeries, 0.21 per 100 surgeries and 0.05 per 100 surgeries respectively. In patients receiving an elective hip-joint arthroplasty SSI rate was 0.93 per 100 surgeries prior to introduction, while it was 1.17 per 100 surgeries during the intervention period and 0.96 per 100 surgeries in patients that used the decolonization set. However SSI rates due to Staphylococcus aureus were 0.30 per 100 surgeries, 0.14 per 100 surgeries and 0.10 per 100 surgeries respectively. In patients receiving, an elective knee-joint arthroplasty SSI rate was 0.52 per 100 surgeries prior to introduction, while it was 0.53 per 100 surgeries during the intervention period and 0.12 per 100 surgeries in patients that used the decolonization set. However, SSI rates due to Staphylococcus aureus were 0.20 per 100 surgeries, 0.13 per 100 surgeries and 0.00 per 100 surgeries respectively. In addition to these preliminary results, we will provide and present a further
In severe cases of total knee arthroplasty which cannot be treated with off-the-shelf implants anymore custom-made knee implants may serve as one of the few remaining options to restore joint function or to prevent limb amputation. Custom-made implants are specifically designed and manufactured for one individual patient in a single-unit production, in which the surgeon is responsible for the implant design characteristics in consultation with the corresponding engineer. The mechanical performance of these custom-made implants is challenging to evaluate due to the unique design characteristics and the limited time until which the implant is needed. Nevertheless, the custom-made implant must comply with clinical and regulatory requirements. The design of custom-made implants is often based on a underlying reference implant with available biomechanical test results and well-known clinical performance. To support surgeons and engineers in their decision whether a specific implant design is suitable, a method is proposed to evaluate its mechanical performance. The method uses finite element
Sub-acromial decompression surgery (SAD) has been widely used to treat shoulder impingement. Its validity has been questioned in multi-centric clinical trials and dissatisfaction rates can be high (35%). It is difficult to predict which patients will benefit operatively as research into predictive factors is limited. The study aim was to conduct a root-cause
Aims. Using data from the Hip Fracture Evaluation with Alternatives of Total Hip Arthroplasty versus Hemiarthroplasty (HEALTH) trial, we sought to determine if a difference in functional outcomes exists between monopolar and bipolar hemiarthroplasty (HA). Methods. This study is a secondary
Purpose and Background. Work-related musculoskeletal disorders (WRMSD) can affect 56–80% of physiotherapists. Patient handling is reported as a significant risk factor for developing WRMSD with the back most frequently injured. Physiotherapists perform therapeutic handling to manually assist and facilitate patients’ movement to aid rehabilitation, which can increase physiotherapists risk of experiencing high forces during patient handling. Methods and Results. A descriptive cross-sectional study was completed to explore and quantitatively measure the movement of ten physiotherapists during patient handling, over one working day, in a neurological setting. A wearable 3-dimensional motion
Unicompartmental knee arthroplasty (UKA) and high tibial osteotomy (HTO) are well-established operative interventions in the treatment of knee osteoarthritis (KOA). However, which of these interventions is more beneficial, to patients with KOA, is not known and remains a topic of much debate. Aims: (i) To determine whether UKA or HTO is more beneficial in the treatment of isolated medial compartment KOA, via an assessment of patient-reported outcome measures (PROMs). (ii) To investigate the relationship between PROMs and radiographic parameters of knee joint orientation/alignment. This longitudinal observational study assessed a total of 42 patients that had undergone UKA (n=23) or HTO (n=19) to treat isolated medial compartment KOA. The PROMs assessed, pre-operatively and 1-year post-operatively, consisted of the: self-administered comorbidity questionnaire; short form-12; oxford knee score; knee injury and osteoarthritis outcome score; and the EQ-5D-5L. The radiographic parameters of knee joint alignment/orientation assessed, pre-operatively and 8-weeks post-operatively, included the: hip-knee-ankle angle; mechanical axis deviation; and the angle of the Mikulicz line. Statistical
The 22 year survivorship of metal on metal hip resurfacing arthroplasty (RSA) is reported to be 94.3% with expert surgeons, in males with head sizes greater than 48mm. The 2023 National Joint Registry (NJR) report estimates survivorship of all RSA at 19 years to be 85%. This estimate includes all designs, head sizes and females. Our aim was to estimate the survivorship of RSA currently available for implantation (males only, head size >48mm, MatOrtho Adept or Smith and Nephew Birmingham Hip Resurfacing (BHR)) in those under 55 years, performed by all surgeons, compared to conventional THR. We performed a retrospective
Aims. Distraction osteogenesis with intramedullary lengthening devices has undergone rapid development in the past decade with implant enhancement. In this first single-centre matched-pair
Microdiscectomy is the most commonly performed spine surgery in the world. Due to its technical simplicity and low complication rate, this was the first spine surgical procedure transitioning for one-day surgery. However, the economic assessment of this outpatient transition was never performed and the question on the real impact in the burden of spine care remains. This economic study aims to access the cost-utility of outpatient lumbar microdiscectomy when compared with the inpatient procedure. To do so, a cost-utility study was performed, adopting the hospital perspective. Direct medical costs were retrieved from the assessment of 20 patients undergoing outpatient lumbar microdiscectomy and 20 undergoing inpatient lumbar microdiscectomy, from a in a Portuguese NHS hospital. Utilities were calculated with quality-adjusted life-years were derived from Oswestry Disability Index values (ODI). ODI was assessed prospectively in outpatients in pre and 3- and 6-month post-operative evaluations. Inpatient ODI data were estimated from a meta-analysis. both probabilistic and deterministic sensitivity analyses were performed and incremental cost-effectiveness ratio (ICER) calculated. A willingness to pay (WTP) threshold of €60000/QALY gained with inpatient procedure was defined. Out results showed that inpatient procedure was cost-saving in all models tested. At 3-month assessment ICER ranged from €135753 to €345755/QALY, higher than the predefined WTP. At 6-month costs were lower and utilities were higher in outpatient, overpowering the inpatient procedure. Probabilistic sensitivity
There is currently no commercially available and clinically successful treatment for scapholunate interosseous ligament rupture, the latter leading to the development of hand-wrist osteoarthritis. We have created a novel biodegradable implant which fixed the dissociated scaphoid and lunate bones and encourages regeneration of the ruptured native ligament. To determine if scaphoid and lunate kinematics in cadaveric specimens were maintained during robotic manipulation, when comparing the native wrist with intact ligament and when the implant was installed. Ten cadaveric experiments were performed with identical conditions, except for implant geometry that was personalised to the anatomy of each cadaveric specimen. Each cadaveric arm was mounted upright in a six degrees of freedom robot using k-wires drilled through the radius, ulna, and metacarpals. Infrared markers were attached to scaphoid, lunate, radius, and 3rd metacarpal. Cadaveric specimens were robotically manipulated through flexion-extension and ulnar-radial deviation by ±40° and ±30°, respectively. The cadaveric scaphoid and lunate kinematics were examined with 1) intact native ligament, 2) severed ligament, 3) and installed implant. Digital wrist models were generated from computed tomography scans and included implant geometry, orientation, and location. Motion data were filtered and aligned relative to neutral wrist in the digital models of each specimen using anatomical landmarks. Implant insertion points in the scaphoid and lunate over time were then calculated using digital models, marker data, and inverse kinematics. Root mean squared distance was compared between severed and implant configurations, relative to intact. Preliminary data from five cadaveric specimens indicate that the implant reduced distance between scaphoid and lunate compared to severed configuration for all but three trials. Preliminary results indicate our novel implant reduced scapho-lunate gap caused by ligament transection. Future
Aims. The COVID-19 pandemic has disrupted the provision of arthroplasty services in England, Wales, and Northern Ireland. This study aimed to quantify the backlog, analyze national trends, and predict time to recovery. Methods. We performed an
The prevalence of alcohol and opioids in severely injured patients has been widely reported from 30-80%. However, despite the increasing global misuse of stimulant drugs, there is a paucity of literature regarding the presence of stimulant drugs in trauma patients. The primary aim of this study was to define the prevalence of stimulant drugs that were detected in patients who presented to Level One Trauma Centers throughout North America, and their effect on length of stay and mortality. Our triage criteria for admittance to the regional trauma centre are based on the recommendations by the American College of Surgeons Committee on Trauma, who now recommend toxicology screening on every patient. This was a retrospective
Abstract. Introduction. Component mal-positioning in total hip replacement (THR) and total knee replacement (TKR) can increase the risk of revision for various reasons. Compared to conventional surgery, relatively improved accuracy of implant positioning can be achieved using computer assisted technologies including navigation, patient-specific jigs, and robotic systems. However, it is not known whether application of these technologies has improved prosthesis survival in the real-world. This study aimed to compare risk of revision for all-causes following primary THR and TKR, and revision for dislocation following primary THR performed using computer assisted technologies compared to conventional technique. Methods. We performed an observational study using National Joint Registry data. All adult patients undergoing primary THR and TKR for osteoarthritis between 01/04/2003 to 31/12/2020 were eligible. Patients who received metal-on-metal bearing THR were excluded. We generated propensity score weights, using Sturmer weight trimming, based on: age, gender, ASA grade, side, operation funding, year of surgery, approach, and fixation. Specific additional variables included position and bearing for THR and patellar resurfacing for TKR. For THR, effective sample sizes and duration of follow up for conventional versus computer-guided and robotic-assisted analyses were 9,379 and 10,600 procedures, and approximately 18 and 4 years, respectively. For TKR, effective sample sizes and durations of follow up for conventional versus computer-guided, patient-specific jigs, and robotic-assisted groups were 92,579 procedures over 18 years, 11,665 procedures over 8 years, and 644 procedures over 3 years, respectively. Outcomes were assessed using Kaplan-Meier
Introduction and Objective. Total knee arthroplasty (TKA) is a frequently and increasingly performed surgery in the treatment of disabling knee osteoarthritis. The rising number of procedures and related revisions pose an increasing economic burden on health care systems. In an attempt to lower the revision rate due to component malalignment and soft tissue imbalance in TKA, robotic assistance (RA) has been introduced in the operating theatre. The primary objective of this study is to provide the results of a theoretical, preliminary cost-effectiveness
Conferences centered around surgery suffers from gender disparity with male faculty having a more dominant presence in meetings compared to female faculty. Orthopedic Surgery possibly suffers the most from this problem of all surgical specialties, and is reflective of a gender disparity in the field. The objective of this study was to investigate the prevalence of “manels”, or male-only sessions, in eight major Orthopedic Surgery meetings hosted in 2021 and to quantify the differences in location of practice, academic position, years of practice, and research qualifications between male and female faculty. Eight Orthopedic conferences organized by major Orthopedic associations (AAOS, COA, OTA, EFORT, AAHKS, ORS, NASS, and AOSSM) from February 2021 to November 2021 were analyzed. Meeting information was retrieved from the conference agendas, and details of chairs and speakers were obtained from Linkedin, Doximity, CPSO, personal websites, and Web of Science. Primary outcomes included: one) percentage of male faculty in all included sessions and two) overall percentage of manels. Secondary outcomes included one) percentage of male speakers and chairs in all included sessions, two) overall percentage of male-chair and male-speaker only sessions. Comparisons for outcomes were made between conferences and session topics (adult reconstruction hip, adult reconstruction knee, practice management/rehabilitation, trauma, sports, general, pediatrics, upper extremity, musculoskeletal oncology, foot and ankle, spine, and miscellaneous). Mean number of sessions for male and female were compared after being stratified into quartiles based on publications, sum of times cited, and H-indexes. Data was analyzed with non-parametric
Aims. Periprosthetic fungal infections are rare and account for 1–2% of all periprosthetic joint infections (PJI). This study aims at presenting treatment details, clinical and microbiological results in a large single centre cohort. Methods. We retrospectively identified 29 patients (9 total knee replacements (TKA) and 20 total hip replacements (THA) treated for a fungal infection between 2007 and 2019. Microbiological findings, patient demographics and complications were analysed. Statistical
Introduction. Neck of femur (NoF) fractures have an inherent 6.5% 30-day mortality as per National hip fracture database(2019). Several studies have demonstrated a higher mortality rate in covid positive NoFs but have been unable to demonstrate whether there are risk factors that contribute to the risk of mortality in this patient group or whether COVID is solely responsible for the higher mortality. Aims. To assess risk factors that are concurrently present in a fracture NoF cohort that may contribute to higher mortality in COVID positive patients. Methods. A cross sectional, retrospective study was performed for a period of 1 year starting from 1st March 2020. All surgically treated neck of femur fracture patients having an isolated intra/extracapsular fracture were included in the study. Data fields recorded- patient demographics, date and time of admission, ward discharge, surgery, mode of surgery (fixation/arthroplasty), prehospital AMTS score, residential status and mobility, ASA grade as per anaesthetist's records, date of death (if deceased), cause of death (as per death certificate/ postmortem / coroner's report).
Aims. Prior cost-effectiveness analyses on osseointegrated prosthesis for transfemoral unilateral amputees have analyzed outcomes in non-USA countries using generic quality of life instruments, which may not be appropriate when evaluating disease-specific quality of life. These prior analyses have also focused only on patients who had failed a socket-based prosthesis. The aim of the current study is to use a disease-specific quality of life instrument, which can more accurately reflect a patient’s quality of life with this condition in order to evaluate cost-effectiveness, examining both treatment-naïve and socket refractory patients. Methods. Lifetime Markov models were developed evaluating active healthy middle-aged male amputees. Costs of the prostheses, associated complications, use/non-use, and annual costs of arthroplasty parts and service for both a socket and osseointegrated (OPRA) prosthesis were included. Effectiveness was evaluated using the questionnaire for persons with a transfemoral amputation (Q-TFA) until death. All costs and Q-TFA were discounted at 3% annually. Sensitivity analyses on those cost variables which affected a change in treatment (OPRA to socket, or socket to OPRA) were evaluated to determine threshold values. Incremental cost-effectiveness ratios (ICERs) were calculated. Results. For treatment-naïve patients, the lifetime ICER for OPRA was $279/quality-adjusted life-year (QALY). For treatment-refractory patients the ICER was $273/QALY. In sensitivity
Aim. The aim of this study was to investigate the metabolomic profile of synovial fluid in periprosthetic joint infection (PJI) cases regarding a possible diagnostic approach. Also, further information about the metabolic composition of synovial fluid in PJI may point to future diagnostic and therapeutic approaches. Method. Patients with a clinical suspicion of a prosthesis infection who underwent a joint puncture in our outpatient department or ward were included. After sample preparation, the nuclear magnetic resonance (NMR) experiments were performed at 310 K on an AVANCE™ NeoBruker Ultrashield 600 MHz spectrometer. Bruker Topspin version 4.0.2 was used for NMR data acquisition. The spectra for all samples were automatically processed (exponential line broadening of 0.3 Hz), phased, and referenced using TSP at 0.0 ppm. In total, 37 metabolites were analysed using a volume of 200 µl per synovial sample. The PJI and aseptic cases were assigned according to the EBJIS criteria. Results. In total, 76 samples were included in the final
Aim. Quadrupled hamstring anterior cruciate ligament plasties (4xHp) have been described as having a higher risk of infection than bone patellar tendon bone plasties (BPTBp). There are 2 theories that might explain this phenomenon. One is the presence of sutures in a 4xHp that could act as a foreign body, The other is the more complex preparation of a 4xHp that might lead to higher contamination rates during the process. The objective of the present study was to evaluate the formation of biofilm in these plasties and to compare it between a 4xHp and a BPTBp. The hypothesis was that the presence of sutures in 4xHp would increase the amount of biofilm present in them in comparison to BPTBp. Method. A descriptive in vitro study was conducted. One 4xHp and one BPTBp were prepared. They were subsequently divided into 8 fragments. Three of them were reserved for negative control, and the rest were contaminated with a strain of S. Epidermidis (ATCC 35984) 10–5. Finally, a quantitative
Study purpose and background. Kinematic variables have been identified as potential biomarkers for low back pain patients; however, an in-depth comparison between chronic (n=22), acute (n=15), and healthy controls (n=136) has not been done. This retrospective data
Revision surgeries for orthopaedic infections are done in two stages – one surgery to implant an antibiotic spacer to clear the infection and another to install a permanent implant. A permanent porous implant, that can be loaded with antibiotics and allow for single-stage revision surgery, will benefit patients and save healthcare resources. Gyroid structures can be constructed with high porosity, without stress concentrations that can develop in other period porous structures [1] [2]. The purpose of this research is to compare the resulting bone and prosthesis stress distributions when porous versus solid stems are implanted into three proximal humeri with varying bone densities, using finite element models (FEM). Porous humeral stems were constructed in a gyroid structure at porosities of 60%, 70%, and 80% using computer-aided design (CAD) software. These CAD models were analyzed using FEM (Abaqus) to look at the stress distributions within the proximal humerus and the stem components with loads and boundary conditions representing the arm actively maintained at 120˚ of flexion. The stem was assumed to be made of titanium (Ti6Al4V). Three different bone densities were investigated, representing a healthy, an osteopenic, and an osteoporotic humerus, with an average bone shape created using a statistical shape and density model (SSDM) based on 75 cadaveric shoulders (57 males and 18 females, 73 12 years) [3]. The Young's moduli (E) of the cortical and trabecular bones were defined on an element-by-element basis, with a minimum allowable E of 15 MPa. The Von Mises stress distributions in the bone and the stems were compared between different stem scenarios for each bone density model. A preliminary
Aims. The aim of this study was to evaluate the healthcare costs and benefits of enoxaparin compared to aspirin in the prevention of symptomatic venous thromboembolism (VTE) after total hip arthroplasty (THA) or total knee arthroplasty (TKA) using data from the CRISTAL trial. Methods. This trial-based economic
This study aimed to characterise the microarchitecture of bone in different species of animal leading to the development of a physiologically relevant 3D printed cellular model of trabecular (Tb) and cortical bone (CB). Using high resolution micro-computed tomography (μ-CT) bone samples from multiple species were scanned and analysed before creating in silico models for 3D printing. Biologically relevant printing materials with physical characteristics similar to that of in vivo bone will be selected and tested for printability. Porcine and murine bone samples were scanned using μ-CT, with a resolution of 4.60 μM for murine and 11 μM for porcine and reconstructed to determine the architectural properties of both Tb and CB independently. A region of interest, 1 mm in height, will be used to generate an in-silico 3D model with dimensions (10 mm. 3. ) and suitable resolution before being translated into printable G code using CAD assisted software. A 1 mm section of each bone was analysed, to determine the differences in the microarchitecture with the intent of setting a benchmark for the developmental 3D in vitro model to be comparable against. In contrast, porcine caudal vertebrae (PCV) have an increased volume due to the size of the bone sample. Interestingly, BV/TR for Tb is similar between species in all samples except murine femur. Murine tibia and PCV have a similar Tb. number and thickness, however different SMI shape and separation. μ-CT scanning and
Osteochondrosis (OC) is a common joint disease that affects developing cartilage and subchondral bone in humans, and in multiple animal species including horses. It is an idiopathic localized joint disorder characterized by focal chondronecrosis and retention of growing cartilage that can lead to the formation of fissures, subchondral bone cysts or intra-articular fragments. OC is considered a complex multifactorial disease with chondrocyte biogenesis impairment mainly due to biochemical and genetic factors. Likewise, the molecular events involved in the OC are not fully understood. Moreover, the OC pathogenesis seems to be shared across species. In particular, equine OC and human juvenile OC share some symptoms, predilection sites and clinical presentation. In this study, by using the label-free mass spectrometry approach, proteome of chondrocytes isolated from equine OC fragments has been analysed in order to clarify some aspects of cell metabolism impairment occurring in OC. Equine chondrocytes isolated from 7 healthy articular cartilages (CTRL) and from 7 osteochondritic fragments (OC) (both obtained from metacarpo/metatarsophalangeal joints) were analysed. Proteins were extracted using urea and ammonium bicarbonate buffer, reduced, alkylated and digested with Trypsin/Lys-C Mix. Peptides were analysed using Q Exactive UHMR Hybrid Quadrupole-Orbitrap Mass Spectrometer (Thermo Scientific). All mass spectra of label-free samples analysed was set up to search against SwissProt human database (Homo sapiens) and SwissProt horse database (Equus caballus). One-way ANOVA was used for hypothesis testing. Proteins with a ≥1.5 fold change and with a FDR adjusted p value of ≤0.05 were defined as differentially expressed. Statistical
Patients with a high comorbidity burden (high-risk) can achieve similar improvements in quality of life compared to low-risk patients, but greater morbidity may deter surgeons from operating on these patients. Whether surgeon volume influences THA outcomes in high-risk patients has not been investigated. This study aimed to compare complication rates and implant survivorship in high-risk patients operated on by high volume (HV) and non-HV THA surgeons. Patients with Charlson Comorbidity Index ≥ 5 and American Society of Anesthesiologist Classification of 3 or 4 undergoing primary, elective THA between 2013 and 2021 were retrospectively reviewed. Patients were separated into groups based on whether they were operated on by a HV surgeon (defined as the top 25% of surgeons at our institution by number of primary THAs per year) or a non-HV surgeon. Groups were propensity matched 1:1 to control for demographic variables. A total of 1,134 patients were included in the matched
Knee swelling is common after injury or surgery, resulting in pain, restricted range of movement and limited mobility. Accurately measuring knee swelling is critical to assess recovery. However, current measurement methods are either unreliable or expensive [1,2]. Therefore, a new measurement method is developed. This wearable (the ‘smart brace’) has shown the ability to distinguish a swollen knee from a not swollen knee using multi-frequency-bio impedance
It is undetermined which factors predict return to work following arthroscopic rotator cuff repair. We aimed to identify which factors predicted return to work at any level, and return to pre-injury levels of work 6 months post-arthroscopic rotator cuff repair. Multiple logistic regression
Abstract. Background. Extracorporeal radiation therapy (ECRT) has been reported as an oncologically safe and effective reconstruction technique for limb salvage in diaphyseal sarcomas with promising functional results. Factors affecting the ECRT graft-host bone incorporation have not been fully investigated. Methods. In our series of 51 patients of primary bone tumors treated with ECRT, we improvised this technique by using a modified V-shaped osteotomy, additional plates and intra-medullary fibula across the diaphyseal osteotomy in an attempt to increase the stability of fixation, augment graft strength and enhance union at the osteotomy sites. We analyzed our patients for various factors that affected union time and union rate at the osteotomy sites. Results. On univariate
Introduction and Objective. Interest for direct anterior approach (DAA) in hip hemiarthroplasty (HHA) has greatly increased in recent years, however which is the best surgical approach in hip replacement treating femoral neck fractures (FNFs) is already unclear. The aim of this study is to perform a radiographic and perioperative complications
Aims. To compare the cost-utility of removable brace compared with cast in the management of adult patients with ankle fracture. Methods. A within-trial economic evaluation conducted from the UK NHS and personnel social services (PSS) perspective. Health resources and quality-of-life data were collected as part of the Ankle Injury Rehabilitation (AIR) multicentre, randomized controlled trial over a 12-month period using trial case report forms and patient-completed questionnaires. Cost-utility
Abstract. INTRODUCTION. To preserve knee function and reduce degenerative, meniscal tears should be repaired where possible. Meniscal wrapping with collagen matrices has shown promising clinical outcome (AAOS meniscal algorithm), however there is limited basic science to support this. AIM. to model the contact pressures on the human tibial plateau beneath a (1) a repaired radial meniscal tear and (2) a wrapped and repaired radial meniscal tear. METHODOLOGY. Complete anterolateral radial tears were formed across 4 lateral human menisci, before repairing with ‘rip-stop’ H sutures using 2mm Arthrex Meniscal Suture tape. This was then repeated with the addition of a ChondroGide collagen matrix wrapping. From this experimental setup a finite element (FE)
Aims. The aim of this study was to estimate the incremental use of resources, costs, and quality of life outcomes associated with surgical reconstruction compared to rehabilitation for long-standing anterior cruciate ligament (ACL) injury in the NHS, and to estimate its cost-effectiveness. Methods. A total of 316 patients were recruited and randomly assigned to either surgical reconstruction or rehabilitation (physiotherapy but with subsequent reconstruction permitted if instability persisted after treatment). Healthcare resource use and health-related quality of life data (EuroQol five-dimension five-level health questionnaire) were collected in the trial at six, 12, and 18 months using self-reported questionnaires and medical records. Using intention-to-treat
To analyse bone stresses in humerus-megaprosthesis construct in response to axial loading under varying implant lengths in proximal humeral replacement following tumour excision. CT scans of 10 cadaveric humeri were processed in 3D Slicer to obtain three-dimensional (3D) models of the cortical and cancellous bone. Megaprostheses of varying body lengths (L) were modelled in FreeCAD to obtain the 3D geometry. Four FE models: group A consisting of intact bone; groups B (L=40mm), C (L=100mm) and D (L=120mm) comprising of humerus-megaprosthesis constructs were created. Isotropic linear elastic behaviour was assigned for all materials. A tensile load of 200N was applied to the elbow joint surface with the glenohumeral joint fixed with fully bonded contact interfaces. Static
Abstract. Objectives. To analyse the costs and benefits of sending femoral head specimens for histopathological
Introduction. Non-union is debilitating, costly and affects 2–8% of intramedullary fixed fractures. Clinical data suggest that percutaneous interfragmentary screws offer a less invasive alternative to exchange nailing. This study aimed to assess their efficiency with biomechanical analyses. Materials and Methods. A tibia was prepared for finite element
Aims. This study aimed, through bioinformatics
We aimed to use data from a randomized controlled trial (RCT) comparing the sliding hip screw vs. intramedullary nailing (IMN) for trochanteric fractures to examine complication rates between those managed with a short vs. long IMN. This is a secondary
Aims. The purpose of this study was to compare clinical results, long-term survival, and complication rates of stemless shoulder prosthesis with stemmed anatomical shoulder prostheses for treatment of osteoarthritis and to analyze radiological bone changes around the implants during follow-up. Methods. A total of 161 patients treated with either a stemmed or a stemless shoulder arthroplasty for primary osteoarthritis of the shoulder were evaluated with a mean follow-up of 118 months (102 to 158). The Constant score (CS), the Disabilities of the Arm, Shoulder and Hand (DASH) score, and active range of motion (ROM) were recorded. Radiological
Abstract. Background. Aim of this study is to determine the difference between re-operation rates after conventional Methods of fixation of patella fractures using Metallic implants and novel technique of all suture fixation using Ethibond or fiber tape. Methods. This is a retrospective comparative
Aims. Tranexamic acid (TXA) is now commonly used in major surgical operations including orthopaedics. The TRAC-24 randomized control trial (RCT) aimed to assess if an additional 24 hours of TXA postoperatively in primary total hip (THA) and total knee arthroplasty (TKA) reduced blood loss. Contrary to other orthopaedic studies to date, this trial included high-risk patients. This paper presents the results of a cost
Introduction. Distal femur fracture fixation in elderly presents significant challenges due to osteoporosis and associated comorbidities. There has been an evolution in the management of these fractures with a description of various surgical techniques and fixation methods; however, currently, there is no consensus on the standard of care. Non-union rates of up to 19% and mortality rates of up to 26 % at one year have been reported in the literature. Delay in surgery and delay in mobilisation post-operatively have been identified as two main factors for high rate of mortality. As biomechanical studies have proved better stability with dual plating or nail-plate combination, a trend has been shifting for past few years towards rigid fixation to allow early mobilisation. Our study aims to compare outcomes of distal femur fractures managed with either single plate (SP), dual plating (DP) or nail-plate construct (NP). Methods. A retrospective review of patients aged above 65 years with distal femur fractures (both native and peri-prosthetic) who underwent surgical management between June 2020 and May 2023 was conducted. Patients were divided into three groups based on mode of fixation - single plate or dual plating or nail-plate construct. AO/OTA classification was used for non-periprosthetic, and Unified classification system (UCS) was used for periprosthetic fractures. Data on patient demographics, fracture characteristics, surgical details, postoperative complications, re-operation rate, radiological outcomes and mortality rate were evaluated. Primary objective was to compare re-operation rate and mortality rate between 3 groups at 30 days, 6 months and at 1 year. Results. A cohort of 32 patients with distal femur fractures were included in this study. 91% were females and mean age was 80.97 (range 68–97). 18 (53%) were non-periprosthetic fracture and 14 (47%) were periprosthetic fractures.18 patients underwent single plate fixation (AO/OTA 33A – 8, 33B/C – 2, UCS V3B – 5, V3C – 3),10 patients had dual plate fixation (AO/OTA 33A – 1, 33B/C – 4, UCS V3B – 3, V3C – 2) and 4 patients underwent nail-plate combination fixation (AO/OTA 33A – 4). 70.5% patients had surgery within 36 hours of admission and 90% within 48 hours.
Results in patients undergoing total hip arthroplasty (THA) for femoral head osteonecrosis (ON) when compared with primary osteoarthritis (OA) are controversial. Different factors like age, THA type or surgical technique may affect outcome. We hypothesized that patients with ON had an increased revision rate compared with OA. We analysed clinical outcome, estimated the survival rate for revision surgery, and their possible risk factors, in two groups of patients. In this retrospective cohort analysis of our prospective database, we assessed 2464 primary THAs implanted between 1989 and 2017. Patients with OA were included in group 1, 2090 hips; and patients with ON in group 2, 374 hips. In group 2 there were more men (p<0.001), patients younger than 60 years old (p<0.001) and with greater physical activity (p<0.001). Patients with lumbar OA (p<0.001) and a radiological acetabular shape type B according to Dorr (p<0.001) were more frequent in group 1. Clinical outcome was assessed according to the Harris Hip Score and radiological
Aim.
Aims. Focal knee arthroplasty is an attractive alternative to knee arthroplasty for young patients because it allows preservation of a large amount of bone for potential revisions. However, the mechanical behaviour of cartilage has not yet been investigated because it is challenging to evaluate in vivo contact areas, pressure, and deformations from metal implants. Therefore, this study aimed to determine the contact pressure in the tibiofemoral joint with a focal knee arthroplasty using a finite element model. Methods. The mechanical behaviour of the cartilage surrounding a metal implant was evaluated using finite element
Introduction. The management of open or unstable ankle and distal tibial fractures pose many challenges. In certain situations, hindfoot nailing (HFN) is indicated, however this depends on surgeon preference and regional variations exist. This study sought to establish the current management and outcomes of complex ankle fractures in the UK. Methods. A National collaborative study in affiliation with BOTA was conducted and data retrospectively collected between January 1. st. – June 30. th. 2019. Adult patients with open and closed complex ankle fractures (AO43/44) were included. Complex fractures included the following patient characteristics: diabetes ± neuropathy, rheumatoid arthritis, alcoholism, polytrauma and cognitive impairment. We obtained data on fixation choice and patient outcomes. Institutional approval was obtained by all centres, and statistical
Total hip arthroplasty has been constantly evolving with technological improvements to achieve the best survival rates. Although the new implants are under closer surveillance through processes such as Beyond Compliance, orthopaedic surgeons generally tend to look out for the latest implants with good short-term results and hope for better long-term results for these. We questioned whether such an assumption or bias is valid. We analysed the data of Kaplan-Meier estimates of cumulative revisions of primary hip replacement by fixation, stem/cup brand and bearing combinations from the NJR 19th Annual Report published in September 2022. We performed a univariate linear regression
Background. Trunk muscles play an important role in supporting the spinal column. A decline in trunk muscle mass, as measured by bioelectrical impedance
Introduction. Legg-Calve-Perthes (Perthes Disease) was first recognised by three physicians, Arthur Legg (1874–1939), Jacqui Calve (1875–1954) and George Perthes (1869 – 1927) in 1910. Perthes disease is a rare childhood condition that affects the hip. It occurs when the blood supply to the femoral head is disrupted. Without this blood supply, the bone cells die and avascular necrosis can occur. The Herring classification is used to diagnose the stages of Perthes Disease. It is an important prognostic factor. There are three classifications, Herring A, B and C. Herring A has no involvement of the lateral pillar with no density changes noted on x-ray. Herring B has at least 50% of the lateral pillar height maintained on x-ray. Herring C has less than 50% of the lateral pillar height on x-ray (Herring et al, 1992). Children with Perthes disease require specialist Limb Reconstruction team throughout their treatment journey, this includes Orthopaedic surgery and therapy (Physiotherapy and Occupational Therapy). The National Limb Reconstruction Therapy Team is based at the National Orthopaedic Hospital, Cappagh. The therapy team consists of 1 Clinical Specialist Physiotherapist, 1 Senior Physiotherapist and 1 Senior Occupational Therapist who provide input to this cohort. This study aims to analyse the importance of a comprehensive pre-operative assessment by the therapy team (Physiotherapist and Occupational Therapist) to maximise patient outcomes post operatively. Methodology. This is a quantitative research study conducted by the National Limb Reconstructive Therapy Service of the National Orthopaedic Hospital in Cappagh, Dublin. The inclusion criteria for this study consisted of:. Age – Patient must be part of the Paediatric Service, i.e., under the age of 16. Diagnosis – Patient must have a diagnosis of Perthes Disease with a Herring Classification documented. Application of a Hip Distractor Frame formed part of the patient's surgical management. Surgery was completed by Mr Connor Green. Surgery was completed between January 2021 and December 2022. Patient were required to have their external hip distractor frame removed by December 2022. Exclusion Criteria: Those not meeting the above inclusion criteria. Following the inclusion criteria, a number of cases were identified of which 10 cases were selected at random. A retrospective
Introduction. It has been contentious whether an anatomic double-bundle technique for anterior cruciate ligament reconstruction (ACLR)is superior to that of a single-bundle technique. It has been hypothesized in the literature that the double-bundle technique could provide function closer to that of the anatomical knee joint. The purpose of this study was to compare the long-term clinical outcomes after single-bundle ACLR versus double-bundle ACLR. We hypothesized that the double-bundle technique would not be superior to the single-bundle technique. Methods. A retrospective, non-randomized, matched-paired comparative study was performed. Patients undergoing primary anterior cruciate ligament reconstruction, using either a double-bundle or single-bundle technique, between 2003 and 2008 were included and matched 1:1. Matching included age, sex, BMI, time from injury to surgery, side of injury and type of sport. Patients who underwent revision procedures, multiligament reconstruction or other ACLR techniques were excluded. Patients were subsequently followed up, noting occurrence of graft rupture and any other complications. Results. A total of 1377 ACLRs were performed during the study period. Seven hundred and fifty-six patients were excluded, leaving 396patients to be included in the matching (198 matched pairs). Mean follow-up time was 176.7 +/− 7.7 months (range, 166–211 months). Overall, 40 patients (10.1%) suffered from a graft rupture which consisted of 22 patients (11.1%) in the single-bundle group and 18patients (9.1%) in the double-bundle group. A multivariate
We aim to analyze the role of patient-related factors on the yield of progenitor cells in the bone marrow aspiration concentrate (BMAC). We performed a retrospective
Shoulder replacement surgery is a well-established orthopaedic procedure designed to significantly enhance patients’ quality of life. However, the prevailing preoperative admission practices within our tertiary shoulder surgery unit involve a two-stage group and save testing process, necessitating an admission on the evening before surgery. This protocol may unnecessarily prolong hospital stays without yielding substantial clinical benefits. The principal aim of our study is to assess the necessity of conducting two preoperative group and save blood tests and to evaluate the requirement for blood transfusions in shoulder arthroplasty surgeries. A secondary objective is to reduce hospital stay durations and the associated admission costs for patients undergoing shoulder arthroplasty. We conducted a retrospective observational study covering the period from 1st January 2023 to 31st August 2023, collecting data from shoulder arthroplasty procedures across three hospitals within the Aneurin Bevan University Health Board. Our