It has become increasingly important to conduct studies assessing clinical outcomes, reoperation rates, and revision rates to better define the indications and efficacy of lumbar spinal procedures and its association with symptomatic adjacent segment degeneration (sASD). Adjacent segment degeneration (ASD) is defined as the radiographic change in the intervertebral discs adjacent to the surgically treated spinal level. SASD represents adjacent segment degeneration which causes pain or numbness due to post-operative spinal instability or nerve compression at the same level. The most common reason for early reoperation and late operation is sASD, therefore is in our best interest to understand the causes of ASD and make steps to limit the occurrence. A comprehensive literature search was performed selecting Randomized controlled trials (RCTs) and retrospective or prospective studies published up to December 2023. Meta-analysis was performed on 38 studies that met the inclusion criteria and included data of clinical outcomes of patients who had degenerative disc disease, disc herniation, radiculopathy, and spondylolisthesis and underwent lumbar fusion or motion-preservation device surgery; and reported on the prevalence of ASD, sASD, reoperation rate, visual analogue score (VAS), and Oswestry disability index (ODI) improvement.Background
Method
The primary aim of this study was to compare the clinical outcomes of osteoid osteoma (OO) between the group of patients with the presence of nidus on biopsy samples from radiofrequency ablation (RFA) with those without nidus. Secondly, we aimed to examine other factors that may affect the outcomes of OO reflecting our experience as a tertiary orthopaedic oncology centre. We retrospectively reviewed 88 consecutive patients diagnosed with OO treated with RFA between November 2005 and March 2015, consisting of 63 males (72%) and 25 females (28%). Sixty-six patients (75%) had nidus present in their biopsy samples. Patients’ mean age was 17.6 years (4-53). Median duration of follow-up was 12.5 months (6-20.8). Lesions were located in the appendicular skeleton in seventy-nine patients (90%) while nine patients (10%) had an OO in the axial skeleton. Outcomes assessed were based on patients’ pain alleviation (partial, complete, or no pain improvement) and the need for further interventions. Pain improvement in the patient group with nidus in histology sample was significantly better than the group without nidus (OR 7.4, CI 1.35-41.4, p=0.021). The patient group with nidus on biopsy demonstrated less likelihood of having a repeat procedure compared to the group without nidus (OR 0.092, CI 0.016-0.542, p=0.008). Our study showed significantly better outcomes in pain improvement in appendicular lesions compared to the axially located lesions (p = 0.005). Patients with spinal lesions tend to have relatively poor pain relief than those with appendicular or pelvic lesions (p=0.007). Patients with nidus on histology had better pain alleviation compared to patients without nidus. The histological presence of nidus significantly reduces the chance of repeat interventions. The pain alleviation of OO following RFA is better in patients with appendicular lesions than spinal or axially located lesions.
Current literature suggests that survival outcomes and local recurrence rates of primary soft-tissue sarcoma diagnosed in the very elderly age range, (over 90 years), are comparable with those in patients diagnosed under the age of 75 years. Our aim is to quantify these outcomes with a view to rationalizing management and follow-up for very elderly patients. Retrospective access to our prospectively maintained oncology database yielded a cohort of 48 patients across 23 years with a median follow-up of 12 months (0 to 78) and mean age at diagnosis of 92 years (90 to 99). Overall, 42 of 48 of 48 patients (87.5%) were managed surgically with either limb salvage or amputation.Aims
Methods
Proximal femoral endoprosthetic replacements (PFEPRs) are the most common reconstruction option for osseous defects following primary and metastatic tumour resection. This study aimed to compare the rate of implant failure between PFEPRs with monopolar and bipolar hemiarthroplasties and acetabular arthroplasties, and determine the optimum articulation for revision PFEPRs. This is a retrospective review of 233 patients who underwent PFEPR. The mean age was 54.7 years (SD 18.2), and 99 (42.5%) were male. There were 90 patients with primary bone tumours (38.6%), 122 with metastatic bone disease (52.4%), and 21 with haematological malignancy (9.0%). A total of 128 patients had monopolar (54.9%), 74 had bipolar hemiarthroplasty heads (31.8%), and 31 underwent acetabular arthroplasty (13.3%).Aims
Methods
While a centralized system for the care of patients with a sarcoma has been advocated for decades, regional variations in survival remain unclear. The aim of this study was to investigate regional variations in survival and the impact of national policies in patients with a soft-tissue sarcoma (STS) in the UK. The study included 1,775 patients with a STS who were referred to a tertiary sarcoma centre. The geographical variations in survival were evaluated according to the periods before and after the issue of guidance by the National Institute for Health and Care Excellence (NICE) in 2006 and the relevant evolution of regional management.Aims
Methods
Chondrosarcoma is the second most common primary sarcoma of bone: conventional chondrosarcoma accounts for 85% of all cases. Conventional chondrosarcoma may be central or peripheral. Most studies group central and peripheral chondrosarcomas together, although there is growing evidence that their clinical behaviour and prognosis differ. The aims of this study were to analyze any differences in characteristics between central and peripheral chondrosarcomas and to investigate the incidence and role of different syndromes. Data from two international tertiary referral sarcoma centres between January 1995 and December 2018 were retrospectively reviewed. The study population consisted of 714 patients with surgically treated conventional chondrosarcoma of the pelvis and limbs.Aims
Methods
Urgent referral to a specialist centre for patients with a soft-tissue sarcoma (STS) has been recommended by the National Institute for Health and Care Excellence (NICE) in the UK since 2006. However, the impact of this recommendation on the prognosis for these patients remains unclear. We aimed to determine the impact of the NICE guidelines on the disease-specific survival (DSS) of patients with an STS. A total of 2,427 patients with an STS referred to a supraregional centre in the ten-year periods before (n = 1,386) and after (n = 1,041) the issue of the NICE guidelines were evaluated.Aims
Methods
Aims Although chondrosarcomas (CSs) display true malignant features, including local recurrence (LR) and metastases, their behaviour in the hands and feet is thought to differ from that in other parts of the axial and appendicular skeleton by having a lower metastatic potential. The purpose of this study was to investigate the disease-specific and surgical factors that affect the local and systemic prognosis of CS of the hands and feet. A multicentre retrospective study was carried out at two tertiary sarcoma centres. A database search identified all patients with a CS treated between January 1995 and January 2018. There were 810 CSs of which 76 (9.4%) were located in the fingers, toes, metacarpals, and metatarsal bones. The median age of the study population was 55 years (36 to 68) with a median follow-up of 52 months (22 to 87) months. Overall, 70% of the tumours were in the hand (n = 54) and 30% in the foot (n = 22). Predictors for LR were margin (p = 0.011), anatomical location (p = 0.017), and method of surgical management (p = 0.003). Anatomical location (p = 0.026), histological grade between 1 and 3 (p = 0.004) or 2 and 3 (p = 0.016), and surgical management (p = 0.001) were significant factors for LR-free survival. Disease-specific survival was affected by histological grade (p < 0.001), but not by LR (p = 0.397).Methods
Results
Malignancy and surgery are risk factors for venous thromboembolism (VTE). We undertook a systematic review of the literature concerning the prophylactic management of VTE in orthopaedic oncology patients. MEDLINE (PubMed), EMBASE (Ovid), Cochrane, and CINAHL databases were searched focusing on VTE, deep vein thrombosis (DVT), pulmonary embolism (PE), bleeding, or wound complication rates.Aims
Methods
The existing clinical guidelines do not describe a clear indication for adjuvant radiotherapy (RT) in the treatment of superficial soft tissue sarcomas (STSs). We aimed to determine the efficacy of adjuvant RT for superficial STSs. We retrospectively studied 304 patients with superficial STS of the limbs and trunk who underwent surgical resection at a tertiary sarcoma centre. The efficacy of RT was investigated according to the tumour size and grade: group 1, ≤ 5 cm, low grade; group 2, ≤ 5cm, high grade; group 3, > 5 cm, low grade; group 4, > 5 cm, high grade.Aims
Methods
The aim of this study was to report the results of custom-made endoprostheses with extracortical plates plus or minus a short, intramedullary stem aimed at preserving the physis after resection of bone sarcomas in children. Between 2007 and 2017, 18 children aged less than 16 years old who underwent resection of bone sarcomas, leaving ≤ 5 cm of bone from the physis, and reconstruction with a custom-made endoprosthesis were reviewed. Median follow-up was 67 months (interquartile range 45 to 91). The tumours were located in the femur in 11 patients, proximal humerus in six, and proximal tibia in one.Aims
Patients and Methods
Investigate the incorporation of an antibiotic in bone cement using liposomes (a drug delivery system) with the potential to promote osseointegration at the bone cement interface whilst maintaining antibiotic elution, anti-microbiological efficacy and cement mechanical properties. Prosthetic joint infection and aseptic loosening are associated with significant morbidity. Antibiotic loaded bone cement is commonly used and successfully reduces infection rates; however, there is increasing resistance to the commonly used gentamicin. Previous studies have shown gentamicin incorporated into bone cement using liposomes can maintain the cement's mechanical properties and improve antibiotic elution. The phospholipid phosphatidyl-l-serine has been postulated to encourage surface osteoblast attachment and in a liposome could improve osseointegration, thereby reducing aseptic loosening. Preliminary clinical isolate testing showed excellent antimicrobial action with amoxicillin therefore the study aims were to test amoxicillin incorporated into bone cement using liposomes containing phosphatidyl-l-serine in terms of antibiotic elution, microbiological profile and mechanical properties. Amoxicillin was encapsulated within 100nm liposomes containing phosphatidyl-L-serine and added to PMMA bone cement (Palacos R (Heraeus Medical, Newbury, UK)). Mechanical testing was performed according to Acrylic Cement standards (ISO BS 5833:2002). Elution testing was carried out along with microbiological testing utilising clinical isolates.Objectives
Methods
Preserving growth following limb-salvage surgery of the upper
limb in children remains a challenge. Vascularized autografts may
provide rapid biological incorporation with the potential for growth
and longevity. In this study, we aimed to describe the outcomes
following proximal humeral reconstruction with a vascularized fibular
epiphyseal transfer in children with a primary sarcoma of bone.
We also aimed to quantify the hypertrophy of the graft and the annual
growth, and to determine the functional outcomes of the neoglenofibular
joint. We retrospectively analyzed 11 patients who underwent this procedure
for a primary bone tumour of the proximal humerus between 2004 and
2015. Six had Ewing’s sarcoma and five had osteosarcoma. Their mean
age at the time of surgery was five years (two to eight). The mean
follow-up was 5.2 years (1 to 12.2).Aims
Patients and Methods
Following the resection of an extensive amount of bone in the
treatment of a tumour, the residual segment may be insufficient
to accept a standard length intramedullary cemented stem. Short-stemmed
endoprostheses conceivably have an increased risk of aseptic loosening.
Extra-cortical plates have been added to minimise this risk by supplementing
fixation. The aim of this study was to investigate the survivorship
of short-stemmed endoprostheses and extra-cortical plates. The study involved 37 patients who underwent limb salvage surgery
for a primary neoplasm of bone between 1998 and 2013. Endoprosthetic
replacement involved the proximal humerus in nine, the proximal
femur in nine, the distal femur in 13 and the proximal tibia in
six patients. There were 12 primary (32%) and 25 revision procedures (68%).
Implant survivorship was compared with matched controls. The amount
of bone that was resected was >
70% of its length and statistically
greater than the standard control group at each anatomical site.Aims
Patients and Methods
Devices are frequently used to gain sufficient purchase in a bone so that the bone itself can be manipulated to move or rupture soft tissue attachments. During hip surgery, several different extraction corkscrews are available to remove the femoral head, each with a different screw design with no evidence to suggest which is most effective. Additionally during the use of corkscrew devices, often due to the low bone density, stripping of the screw threads out of the femoral head can occur prior to its extraction, thus requiring reinsertion. The aims of this project were to measure the primary pullout and reinsertional forces of five commercially available corkscrews. Polyurethane bone models covering a spectrum of osteoporotic to normal bone densities (0.08 gcm-3, 0.16 gcm-3 and 0.32 gcm-3) were used in axial tensile testing at two insertional depths to assess the maximum pullout force of these corkscrews (Zimmer, Stryker, Medacta, JRI, Depuy).Background
Methods
Compare clinical outcomes following staged revision arthroplasty for periprosthetic joint infection (PJI) secondary to either multidrug resistant (MDR) bacteria or non-MDR (NMDR) bacteria. Retrospective analysis of a prospectively collected bone infection database. Adult patients diagnosed and treated for hip or knee PJI, between January 2011 and December 2014, with minimum one-year follow-up, were included in the study. Patients were divided into two groups: MDR group (defined as resistance to 3 or more classes) and N-MDR group (defined as acquired resistance to two classes of antibiotic or less). The Charlson Comorbidity Index was used to stratify patients into low, medium and high risk. The diagnosis of PJI, and any recurrence following treatment, was made in accordance with the Musculoskeletal Infection Society criteria. Failure was defined as recurrence of infection necessitating implant removal, excision arthroplasty, arthrodesis or amputation.Aim
Method
25–40% of unicompartmental knee replacement (UKR) revisions are performed for unexplained pain possibly secondary to elevated proximal tibial bone strain. This study investigates the effect of tibial component metal backing and polyethylene thickness on cancellous bone strain in a finite element model (FEM) of a cemented fixed bearing medial UKR, validated using previously published acoustic emission data (AE). FEMs of composite tibiae implanted with an all-polyethylene tibial component (AP) and a metal backed one (MB) were created. Polyethylene of thickness 6–10mm in 2mm increments was loaded to a medial load of 2500N. The volume of cancellous bone exposed to <−3000 (pathological overloading) and <−7000 (failure limit) minimum principal (compressive) microstrain (µ∊) and >3000 and >7000 maximum principal (tensile) microstrain was measured. Linear regression analysis showed good correlation between measured AE hits and volume of cancellous bone elements with compressive strain <−3000µ∊: correlation coefficients (R= 0.947, R2 = 0.847), standard error of the estimate (12.6 AE hits) and percentage error (12.5%) (p<0.001). AP implants displayed greater cancellous bone strains than MB implants for all strain variables at all loads. Patterns of strain differed between implants: MB concentrations at the lateral edge; AP concentrations at the keel, peg and at the region of load application. AP implants had 2.2 (10mm) to 3.2 (6mm) times the volume of cancellous bone compressively strained <−7000µ∊ than the MB implants. Altering MB polyethylene insert thickness had no effect. We advocate using caution with all-polyethylene UKR implants especially in large or active patients where loads are higher.
Bone tumours of the foot are rare, representing 3–6% of all bone tumours. Of these 15–25% are thought to be malignant. Obtaining clear surgical margins remains an important factor in improving outcome from tumours. However, the anatomical complexity of the foot can lead to an inadequate resection, particularly if the operating surgeon is attempting to preserve function. The aim of this paper is to identify the clinical course of patients suffering from malignant bone tumours of the foot. A prospective tumour registry over a 30 yr period was used to identify patients with a malignant bone tumour of the foot. Patient demographics along with the site of primary malignancy, region of the foot involved and clinical management were recorded.Introduction
Method
The management of spinal deformity in children
with univentricular cardiac pathology poses significant challenges to
the surgical and anaesthetic teams. To date, only posterior instrumented
fusion techniques have been used in these children and these are
associated with a high rate of complications. We reviewed our experience
of both growing rod instrumentation and posterior instrumented fusion
in children with a univentricular circulation. Six children underwent spinal corrective surgery, two with cavopulmonary
shunts and four following completion of a Fontan procedure. Three
underwent growing rod instrumentation, two had a posterior fusion
and one had spinal growth arrest. There were no complications following
surgery, and the children undergoing growing rod instrumentation
were successfully lengthened. We noted a trend for greater blood
loss and haemodynamic instability in those whose surgery was undertaken
following completion of a Fontan procedure. At a median follow-up
of 87.6 months (interquartile range (IQR) 62.9 to 96.5) the median
correction of deformity was 24.2% (64.5° (IQR 46° to 80°) We believe that early surgical intervention with growing rod
instrumentation systems allows staged correction of the spinal deformity
and reduces the haemodynamic insult to these physiologically compromised
children. Due to the haemodynamic changes that occur with the completed
Fontan circulation, the initial scoliosis surgery should ideally
be undertaken when in the cavopulmonary shunt stage. Cite this article:
Joint registries report that 25–40% of UKR revisions are performed for pain. Proximal tibial strain and microdamage are possible causes of this “unexplained” pain. The aim of this study was to examine the effect of UKR implant design and material on proximal tibial cortical strain and cancellous microdamage. Composite Sawbone tibias were implanted with cemented UKR components: 5 fixed bearing all-polyethylene (FB-AP), 5 fixed bearing metal backed (FB-MB), and 5 mobile bearing metal backed implants (MB-MB). Five intact tibias were used as controls. Tibias were loaded in 500N increments to 2500N. Cortical surface strain was measured using digital image correlation (DIC). Cancellous microdamage was measured using acoustic emission (AE), a technique which detects elastic waves produced by the rapid release of energy during microdamage events. DIC showed significant differences in anteromedial cortical strain between implants at 1500N and 2500N in the proximal 10mm only (p<0.001) with strain shielding in metal backed implants. AE showed significant differences in cancellous microdamage (AE hits), between implants at all loads (p=0.001). FB-AP implants displayed significantly more hits at all loads than both controls and metal backed implants (p<0.001). FB-AP implants also differed significantly by displaying AE hits on unloading (p=0.01), reflecting a lack of implant stiffness. Compared to controls, the FB-AP implant displayed 15x the total AE hits, the FB-MB 6x and the MB-MB 2.7x. All-polyethylene medial UKR implants are associated with greater cancellous bone microdamage than metal backed implants even at low loads.
We present our experience of the coned hemi-pelvis (‘ice-cream’ cone) implant, using an extended posterior approach to the hip joint, in the management of pelvic bone loss and pelvic discontinuity. Retrospective study conducted utilising a prospectively collected database. Patients who underwent an ice-cream cone reconstruction between August 2004 – September 2011 were identified. All had a posterior approach to the hip. Femur prepared in the standard fashion. A variety of femoral components used. Demographic data was recorded along with the indication for surgery and outcomes.Introduction
Methods
Review our unique experience in the management of 29 consecutive casualties who survived open pelvic fractures following a blast mechanism. Retrospective study utilising a prospectively collected combat trauma registry. Records of UK Service Personnel sustaining open pelvic fractures from an explosion from Aug 2008 – Aug 2010 identified. Casualties who survived to be repatriated to the Royal Centre for Defence Medicine, University Hospital Birmingham were selected for further study. The median New Injury Severity Score (NISS) was 41. Mean blood requirement in the first 24 hours was 60.3 units. In addition to their orthopaedic injury, 6 (21%) had an associated vascular injury, 7(24%) had a bowel injury, 11 (38%) had a genital injury and 7(24%) had a bladder injury. 8 (28%) fractures were managed definitively with external fixation, and 7 (24%) fractures required internal fixation. Of those patients who underwent internal fixation, 5 (57%) required removal of metalwork for infection. Faecal diversion was performed on 9 (31%) casualties. Median length of stay was 70.5 days, and mean total operative time was 29.6 hours. At a mean 20.3 months follow-up, 24 (83%) were able to ambulate, and 26 (90%) had clinical and radiological evidence of pelvic ring stability.Aim/Purpose
Methods and Results
The aim of this study is to review our unique experience in the management of 29 consecutive casualties who survived open pelvic fractures following a blast mechanism, in order to determine the injury pattern, clinical management and outcome of these devastating injuries. All patients were serving soldiers who were injured whilst on operations in Afghanistan. The median New Injury Severity Score (NISS) was 41. Mean blood requirement in the 1st 24 hours was 60.3 units. In addition to their orthopaedic injury, 6 (21%) had an associated vascular injury, 7(24%) had a bowel injury, 11 (38%) had a genital injury and 7(24%) had a bladder injury. 8 (28%) fractures were managed definitively with external fixation, and 7 (24%) fractures required ORIF. Of those patients who underwent ORIF, 4 (57%) required removal of metalwork for infection. Faecal diversion was performed on 9 (31%) casualties. Median length of stay was 70.2 days, and mean total operative time was 29.6 hours. At a mean 20.3 months follow-up, 24 (83%) were able to ambulate, and 26 (90%) had clinical and radiological evidence of pelvic ring stability. The “Global War on Terror” has resulted in incidents that were previously confined exclusively to conflict areas can now occur anywhere, and surgeons who are involved in trauma care may be required to manage similar injuries from terrorist attacks. Our study clearly demonstrates that the management of this injury pattern is extremely resource intensive with the need for significant multi-disciplinary input. Given the nature of the soft tissue injury, we would advocate an approach of minimal internal fixation in the management of these fractures. With the advent of emerging wound and faecal management techniques, we do not believe that faecal diversion is mandated in all cases.
This study was undertaken to assess for equivalence or superiority in tendon reconstruction techniques. This is an A statistically significant difference was shown between all the techniques by analysis of variance. This will guide clinical application of these techniques. The use of bone tunnels, through which the flexor hallucis longus tendon can be passed, were found to be biomechanically superior, with regard to ultimate load to failure, to either bone anchors or end-to-end tendon suture techniques. Interference screws were found to have a large range in their ultimate load suggesting a lack of consistency in the results. The mean of the bone tunnel group (482.8N, SD 83.6N) is significantly (p < 0.01) higher than the mean of the bone anchor group (180.2N, SD 19.3N), which is, in turn, significantly (p < 0.01) higher than the mean of the Bunnell group (73.7N, SD 20.9N). This study is larger than any previous study found in the literature with regard to number of study groups and allows the techniques to be compared side by side.
Patients with fractured neck of femur have historically received less attention than they deserve and have high morbidity and mortality. Literature suggests that speed to theatre reduces length of in-patient stay and complications. Using patients' expressed needs as a basis to redesign the service, a multidisciplinary project team mapped the current process of admission, simulated and mapped an ideal process. This resulted in a fast admission process for patients with suspected fractured proximal femur. Paramedics call a trauma coordinator based on the specialist ward who meets the patient at the door of the Emergency Department, escorting them to X-ray. The fracture is confirmed remotely by an experienced surgeon using PACS. Patients are taken to an optimisation area in the theatre complex for consultant orthopaedic and anaesthetic assessment prior to surgery the same day (utilising spare time on elective and trauma lists), or early the following day. Fascia-iliaca blocks are provided by trauma coordinators to improve pain control and reduce sedative effects of opiates, aiding early mobilisation. Measures include time to theatre, length of stay, and patient experience. Meaningful mortality and morbidity data will become available later.Background
Methodology
The fixation of comminuted femoral fractures with intramedullary nails is commonplace but there remains little work on the mechanical ability of the different diameters of nail available to resist bending. What previous work there is has produced conflicting conclusions. The bending stiffness against the intramedullary nail diameter and the extent of the comminuted fracture is clinically important due to the impact on fracture healing and implant failure. Intramedullary nails of differing diameters (10 mm, 11 mm and 13 mm) were loaded axially in fourth generation composite femurs with increasing mid shaft bone defects, namely 3cm, 5cm, 8cm and 10cm bones. The loading versus the displacement was recorded for each nail. A one-way ANOVA analysis demonstrated a significant difference between intramedullary nail diameters and the bending stiffness, with p values of less than 0.012; 3cm mean 12.26 (CI 9.06-15.46) mm, p=0.012; 5 cm mean 10.63 (CI 8.35-12.92) mm, p=<0.001; 8 cm mean 11.04 (CI 8.35-13.74) mm, p=<0.001; 10 cm mean 11.68 (CI 7.86-15.50) mm, p=<0.001. For the 11 mm diameter intramedullary nail, failure occurred at around two times the body weight of an average individual or 1400 to 1800 N. A repeated measure ANOVA analysis of the effect of the increasing bone defect showed a mixed picture, with a significant difference between the 5 cm and 8 cm gap and only a trend towards significance between 5 cm and 10 cm. Caution should be advised when considering using a cannulated femoral intramedullary nail in a patient with a fracture gap of greater than 5 cm. Further, the mechanical effect of comminuted fractures treated with nails suggests reduced stiffness with increasing length of fracture gap although the picture is complex and explains the divergence of research conclusions.
One reason why NICE (National Institute for Clinical Excellence) does not support operations by the NHS to heal hyaline cartilage lesions using a patients own cells is because there is no clear evidence to show that these operations are beneficial and cost-effective in the long term. Specifically, NICE identified a deficiency of high quality cartilage being produced in repaired joints. The presence of high quality cartilage is linked to long-lasting and functional repair of cartilage. The benchmark for quality, NICE stipulate, is repair cartilage that is stiff and strong and looks similar to the normal tissue surrounding it, i.e. mature hyaline articular cartilage. Biopsy material from autologous cartilage implantation surgical procedures has the appearance of immature articular cartilage and is frequently a mixture of hyaline and fibrocartilage. Osteoarthritic cartilage, in its early stages, also exhibits characteristics of immature articular cartilage in that it expresses proteins found in embryonic and foetal developmental stages, and is highly cellular as evidenced through the presence of chondrocyte clusters. Therefore, an ability to modulate the phenotype and the structure of the extracellular matrix of articular cartilage could positively affect the course of repair and regeneration of articular cartilage lesions. In order to do this, the biochemical stimuli that induce the transition of an essentially unstructured amorphous cartilage mass (immature articular cartilage) to one that is highly structured and ordered, and biomechanically adapted to its particular function (mature articular cartilage) has to be identified. We show for the first time, that fibroblast growth factor-2 and transforming growth factor beta-1 induce precocious maturation of immature articular cartilage. Our data demonstrates that it is possible to significantly enhance maturation of cartilage tissue using growth factor stimulation; consequently this may have applications in transplantation therapy, or through phenotypic modulation of osteoarthritic chondrocytes in diseased cartilage in order to stimulate growth and maturation of repair tissue.
The open blast fracture of the pelvis is considered
to be the most severe injury within the spectrum of battlefield trauma.
We report our experience of 29 consecutive patients who had sustained
this injury in Afghanistan between 2008 and 2010. Their median new
injury severity score (NISS) was 41 (8 to 75), and mean blood requirement
in the first 24 hours was 60.3 units (0 to 224). In addition to
their orthopaedic injury, six had an associated vascular injury, seven
had a bowel injury, 11 had a genital injury and seven had a bladder
injury. In all, eight fractures were managed definitively with external
fixation and seven required internal fixation. Of those patients
who underwent internal fixation, four required removal of metalwork
for infection. Faecal diversion was performed in nine cases. The
median length of hospital stay following emergency repatriation
to the United Kingdom was 70.5 days (5 to 357) and the mean total
operating time was 29.6 hours (5 to 187). At a mean follow-up of
20.3 months (13.2 to 29.9), 24 patients (82.8%) were able to walk
and 26 (89.7%) had clinical and radiological evidence of stability
of the pelvic ring. As a result of the increase in terrorism, injuries that were
previously confined exclusively to warfare can now occur anywhere,
with civilian surgeons who are involved in trauma care potentially
required to manage similar injuries. Our study demonstrates that
the management of this injury pattern demands huge resources and significant
multidisciplinary input. Given the nature of the soft-tissue injury,
we would advocate external fixation as the preferred management
of these fractures. With the advent of emerging wound and faecal
management techniques, we do not believe that faecal diversion is
necessary in all cases.
Patient specific knee modelling has the potential to help understand the development of the mechanically induced degenerative disease, Osteoarthritis. A full joint contact model of the knee involves modelling the bones, ligaments, articular cartilage (AC) and meniscus, as well as, the kinematics and geometry of real joints. These finite element models will inevitably require great computational resource to run and it is desirable to find resource effective material model formulations which can accurately describe the mechanical behaviour of the soft tissues. Biphasic models (BIMs) have long been established as an effective formulation for modelling AC. However, the swelling behaviour caused by changes in the ionic phase is a major recovery mechanism and is neglected in the BIMs. It is therefore believed that BIMs alone are insufficient to fully describe the mechanical behaviour of AC. Instead, a thermal analogy method which is generically a BIM that includes the swelling behaviour has been thought to be suitable and has been validated against literature data using material parameters optimized to match the numerical and experimental results. To ensure the model is suitable for patient specific modelling where it will have the ability to reflect the individual AC material properties of the patients in the mechanical behaviour it predicts, two experiments have been planned and are currently being carried out using bovine AC. The first experiment is to investigate the diffusivity of the tissue in solutions of different molarity by measuring the change in tissue weight over time. Eleven explants are taken from the same bovine articular joint using a 6mm biopsy punch and are left in 10mM of PBS overnight to ensure ionic equilibrium has been reached before experiments are carried out. The explants are then placed in PBS solutions of molarities ranging from 0mM to 10mM and weighed at regular time intervals. In the final stage, the explants are then lyophilized and weighed for determining the volume of water in the tissues. Using Archimedes principle, the change in porosity of the tissue is found. A preliminary study has shown that explants submerged in a solution of 5mM has an approximately 4% change in weight after the first 24h and a further 1.73% change in the following 24h. Control specimens left in a solution of 10mM had a 0% change in weight. The second experiment is to carry out mechanical loading on the AC specimens while submerged in a solution of different ion concentrations. Experiments with various loading conditions are being investigated to explore their efficacy for validation. Preliminary compression tests have been carried out where steps of 1% strain was applied, giving a total of 10% strain. Between each step, strain was held constant until full relaxation has been achieved. The reaction force measured from the second experiment in conjunction with data collected from the first experiment will be compared to results predicted in the numerical model. This will allow the determination of whether thermal analogy is adequate or whether more complex triphasic models need to be considered. Furthermore, the development of these experimental methods will contribute to the validation of other AC material models in the future.
Iatrogenic proximal femur hoop-stress fracture is a recognised complication of uncemented hip arthroplasty. It has a reported incidence of two to three percent and increases patient morbidity. We describe a novel technology that predicts fracture in real-time by less than one minute. Four proximal femora from red deer (Cervus elaphus), similar size to human proximal femora, were prepared to accept an uncemented hip arthroplasty femoral rasp (Finsbury Orthopaedics) and then mounted in a loading machine. The femora were fresh-frozen, defrosted and kept at room temperature in 0.9% saline swabs. The rasp was forced into each femur in repeated loading cycles every 10 seconds, in steps of 100N increasing from 200N to over 2000N until fracture, in a manner to simulate surgery. One sensor was attached to the surface of the proximal femur and one to the femoral rasp. The sensor outputs were recorded, analysed and displayed on a PC using a software algorithm to show signal energy (joules) and amplitude (decibels). The proximal femur was coated with specular marking paint to permit real-time 3-D digital image correlation (DIC) analysis. DIC is an established tool in engineering fracture analysis and utilises two spatially orientated video cameras to measure surface strain and fracture. The femur was observed by the human eye and loaded in cycles until a fracture was seen. The moment of fracture was marked in the recording timeline. DIC was used to confirm fracture.Introduction
Method
Excessive implant migration and micromotion have been related to eventual implant loosening. The aim of this project is to develop a computational tool that will be able to predict the mechanical performance of a cementless implant in the presence of uncertainty, for example through variations in implant alignment or bone quality. To achieve this aim, a computational model has to be developed and implemented. However, to gain confidence in the model, it should be verified experimentally. To this end, the present work investigated the behavior of a cementless implant experimentally, and compared the results with a computational model of the same test setup. A synthetic bone (item 3406, Sawbones Europe AB, Sweden) was surgically implanted with a Furlong cementless stem (JRI, Sheffield, UK) in a neutral position and subjected to a compression fatigue test of −200 N to −1.6 kN at a frequency of 0.5 Hz for 50000 cycles. Measurements of the micromotion and migration were carried out using two linear variable differential transducers and the strain on the cortex of the femur was measured by a digital image correlation system (Limess Messtechnik &
Software Gmbh). A three-dimensional model was generated from computed tomography scans of the implanted Sawbone and converted to a finite element (FE) model using Simple-ware software (Simpleware Ltd, Exeter, UK). Face-to-face elements were used to generate a contact pair between the Sawbone and the implant. A contact stiffness of 6000 N/m and a friction coefficient of 0.3 were assigned. The analysis simulated a load of −1.6 kN applied to the head of the implant shortly post implantation. The motions and strains recorded in the experiment were compared with the predictions from the computational model. The micromotion (the vertical movement of the implant during a single load cycle), was measured at the proximal shoulder, at the distal tip of the implant and at the bone-implant interface. The maximum value calculated proximally using FE was 61.3 μm compared to the experimental value of 59.6 μm. At the distal end, the maximum micromotion from FE was 168.9 μm compared to 170 μm experimentally. As a point of reference, some authors have suggested that in vivo, fibrous tissue formation may take place at the bone-implant interface when the micromotion is above 150 μm. The maximum micromotion found computationally at this interface was 99 μm which is below the threshold value defined. The longitudinal strain over the surface of the bone was variable and reached values of up to 0.15% computationally and 0.4% experimentally; this may be related to the coordinate systems used. However, it was noted that digital image correlation identified qualitatively similar strain patterns, and has great potential for measuring low level surface strains on bone. In conclusion, the good correlation between the computational modelling and experimental tests provides confidence in the model for further investigations using probabilistic analyses where more complex configurations (for example change in implant alignment) can be analyzed.
The Stryker nail constructs were significantly stronger than the Synthes constructs (p=0.008); although the DePuy constructs were similar in strength to the Stryker constructs (p=0.83) they were not significantly different from the Synthes constructs (p=0.098).
Our study showed that the Synthes nail failed at a significantly lower load than the DePuy or the Stryker nails. The Synthes construct failed at a typical walking load, around three times body weight for an 80kg patient.
There is limited research showing the effect that varying the monomer to polymer ratio (independent from other constituents) has on thermal and mechanical properties of ABC.
Thermal characteristics of the polymerization reaction such as maximum polymerization reaction temperature (Tmax) and setting time (ts) were recorded using a Picolog digital data recorder. Compressive mechanical properties (Young’s modulus and yield stress) were measured using a TestexpertII Universal Testing System from Zwick Roell implementing ISO5833 test criteria. SPSS 14 for Windows software was used for calculating statistics and data analysis.
Compression tests showed a significant (p=0.022) decrease in E-modulus (2.63 to 2.22 GPa) with a strong Pearson correlation negative coefficient (r2= −0.827). Similarly, yield compressive stress showed a significant (p=0.002) decrease (121.83–101.19 MPa) with a strong negative correlation (r2= −0.93)
We implanted titanium and carbon fibre-reinforced plastic (CFRP) femoral prostheses of the same dimensions into five prosthetic femora. An abductor jig was attached and a 1 kN load applied. This was repeated with five control femora. Digital image correlation was used to give a detailed two-dimensional strain map of the medial cortex of the proximal femur. Both implants caused stress shielding around the calcar. Distally, the titanium implant showed stress shielding, whereas the CFRP prosthesis did not produce a strain pattern which was statistically different from the controls. There was a reduction in strain beyond the tip of both the implants. This investigation indicates that use of the CFRP stem should avoid stress shielding in total hip replacement.
This study aims to evaluate the accuracy of sheer off self limiting screw drivers and to assess repeatability with age. It has been reported that overzealous tightening of halo pins is associated with co-morbidity. Our unit has recently received a tertiary referral where the patient over tightened a pin leading to intracranial haematoma, hence our interest in this subject. The torque produced by six new and nine old screw drivers was tested using an Avery Torque Gauge and a Picotech data recorder. These devices are designed to produce a torque of 0.68 Nm, any greater than this is potentially hazardous. Accepted error for each device was +/− 10%. The average torque produced by the new screw drivers was 0.56 Nm with a range of 0.35–0.64 Nm (SD 0.120). The older screw drivers produced an average torque of 0.67 Nm ranging from 0.52–0.85 Nm (SD 0.123). In conclusion, sheer off self limiting screw drivers are not accurate devices. The older devices are more likely to produce a torque exceeding a safe range and therefore we would recommend the use of new devices only.
Five specimens were implanted for each group 1) with pedicle screw (into L3 and L5) and tested with/without Synex (expandable) cage anteriorly, 2) implanted with a Synex cage and Double screw+rod Ventrofix system, 3) Synex cage and Double screw+ Single rod Ventrofix construct and 4) Synex cage and Single screw+ Single rod Ventrofix system.
The double screw/ single rod system is less effective than the Ventrofix System but is comparable to the pedicle screw construct. The single screw/ single rod construct leads to unacceptable movement about the axis of the inferior screw particularly in extension with a ROM much greater than the intact spine (p<
0.001)
Our aim was to determine whether abnormalities noted on MRI immediately after reduction for developmental dysplasia of the hip could predict the persistance of dysplasia and aid surgical planning. Scans of 13 hips in which acetabular dysplasia had resolved by the age of four years were compared with those of five which had required pelvic osteotomy for persisting dysplasia. The scans were analysed by two consultant musculoskeletal radiologists who were blinded to the outcome in each child. The postreduction scans highlighted a number of anatomical abnormalities secondary to developmental dysplasia of the hip, but statistical analysis showed that none were predictive of persisting acetabular dysplasia in the older child, suggesting that the factors which determine the long-term outcome were not visible on these images.
Leucocytes represent a very important host defence against a number of invading pathogens and neoplasia. However, the activity of phagocytic leucocytes has been heavily implicated in the development of ischaemia-reperfusion injury, and as an aetiological factor in the pathology of other clinically important inflammatory conditions. Ischaemia-reperfusion injury occurs in diseases such as stroke and ischaemic heart disease (IHD), and during surgical procedures such as orthopaedic surgery. Investigations presented here employed a model of tourniquet-induced forearm ischaemia-reperfusion injury to investigate the effect on leucocyte adhesion and trapping (n=20). Neutrophil and monocyte leucocyte subpopulations were isolated by density gradient centrifugation techniques. Neutrophil and monocyte cell surface expression of the adhesion molecule CD11b was measured by labelling with fluorescent anti-CD11b monoclonal antibody via flow cytometry. Plasma concentrations of the soluble intercellular adhesion molecule-1 (sICAM-1) and soluble L-selectin (sL-selectin) adhesion molecules were measured using commercially available ELISA kits. Leucocyte trapping was investigated by measuring the concentration of leukocytes in venous blood leaving the arm. During ischaemia-reperfusion there was an increase in CD11b expression on neutrophils (p=0.040) and monocytes (p=0.049), a decrease in sL-selectin (p=0.387) and sICAM-1 (p=0.089) concentrations, and a decrease in peripheral blood leucocyte concentration (p=0.019). Evidence of increased leucocyte adhesion and trapping during ischaemia-reperfusion injury was supported by an increase in CD11b cell surface expression of neutrophils and monocytes. CD11b is expressed on phagocytic leucocytes and binds to ICAM-1 expressed on the surface of vascular endothelium. This increased expression of CD11b on leucocytes may therefore play a central role as the mechanism by which leucocyte trapping in the microcirculation occurs. The measured decrease in plasma concentration of sICAM-1 and sL-selectin suggests that these adhesion molecules retain their functional activity, and may bind to their corresponding cell surface ligands. It is therefore reasonable to believe that ICAM-1 expressed on the endothelium and L-selectin expressed on leucocytes is also binding to their corresponding cell surface ligands. A decrease in the number of leucocytes in the peripheral circulation may be due to increased trapping of leucocytes in the microcirculation. When leucocytes become trapped their concentration in blood leaving the microcirculation decreases, resulting in the measured decrease in leucocyte concentration. In conclusion, this study confirms the important role of leucocytes during ischaemia-reperfusion injury, which could allow for the possibility of future research that may provide therapeutic intervention for inflammatory conditions.
The aim of this study was to compare the strain pattern in intact and resurfaced femurs using validated third generation composite femurs and rosette strain gauges.
Further tests were carried out in which an abductor load was included in the model. Testing was done at 600N and repeated thrice for each femur. The principal strains were calculated and compared with the the principal strains without the abductor load.
Controversy exists as to whether the biomechanical properties of a 360 lumbar fusion are influenced by the order in which the anterior and posterior components of the procedure are performed. The fusion technique used Magerl screws to effect the posterior fusion and a Syncage implant (Stratec) to effect the anterior component of the fusion. Isolated motion segments from calf spines were tested in each of two groups of five. In the first group the posterior fusion was performed first and in the second group the anterior fusion was performed first. Loads were applied as a dead weight of 2Nm in each range of movement of the spine (flexion/extension, lateral flexion and rotation). The range of movement was measured using the Qualisys motion analysis software linked to a set of five cameras, using external marker clusters attached to the vertebral bodies. Each motion segment was tested prior to instrumentation, post anterior or posterior instrumentation and with both anterior and posterior instrumentation. Ranges of movement following 360 instrumentation were increased in all planes tested when posterior fixation was performed first; flexion/extension 26% v 55% (p=0.020), lateral flexion 18% v 34% (p=0.382), and rotation 18% v 73% (p=0.034). It was concluded that posterior fixation should not be performed prior to anterior fixation as this results in a significant loss of stability in both flexion/extension and rotation
Interbody fusion is increasingly widely used as a treatment for intervertebral disc disorders, but the biomechanics of the procedure are not well understood. The compressive loads through the spine are largely carried by the implant or bone graft, which typically rests on a relatively small area of the vertebral body. As the compressive strength of the bone is very low, subsidence of the implants into the vertebral bodies is a common clinical complication. Previous biomechanical studies of spinal fusion have concentrated on the stiffness of the constructs, which is important in promoting fusion. Preliminary studies have shown that there are large differences in compressive strength between different implant systems, and gave an insight into the biomechanical factors that are important in determining the strength of spinal fusion constructs. This paper reports part of a larger on going study comparing anterior and posterior fusion systems, with various methods of fixation. A major problem in interpreting the results of these tests is to distinguish between initial settling of the implants and the onset of failure to construct. We have developed a novel technique using acoustic emission monitoring to detect microcracking in the bones, which allows the onset of failure to be distinguished from initial bedding in of the implants. Two implant systems were tested, the Syncage and the Contact fusion cage. The cages were implanted into porcine lumbar spines at L4-L5, and the implanted motion segment was then dissected out. Steel plates were mounted on each end using bone cement to ensure an even distribution of load through the vertebral body. The complete constructs were then loaded in compression, using acoustic emission sensors to detect microcracking in the bones. The load was cyclically increased in o.5kN steps until failure occurred. The acoustic emission technique gave a sensitive indication of the onset of damage in the bones and allowed the initial settling of the implant under load to be identified. Using cyclic unloading and reloading, it was possible to accurately identify whether this damage had weakened the construct or increased its strength by redistributing stress concentrations. Initial results indicate that the Contact fusion cage fails at a much lower load than the Syncage in this model; this is ascribed to the very small contact areas between the cage and the vertebral body, which results in high compressive stresses in the bone. Under large compressive loads it appears that the constructs become unstable, and fail by buckling and plastic collapse of the vertebral bodies. Various failure models are therefore possible depending on which part of the vertebral body starts to collapse first.
We measured the proximal migration of 265 acetabular cups over seven years and correlated the findings with clinical outcome and acetabular revision for aseptic loosening. Cups which eventually became aseptically loose were shown to migrate more rapidly than successful cups. The average proximal migration at two years postoperatively for four groups of cups showed a monotonic relationship to the acetabular revision rate for aseptic loosening at 6.5 years. We conclude that acetabular cups which develop aseptic loosening as evidenced by pain, revision or screw fracture show increased proximal migration by one year, and that the 'migration rate' at two years can be used to predict the acetabular revision rate from aseptic loosening at 6.5 years.
Individual components of a total hip replacement are difficult to evaluate and quantify. We have studied the assessment of the acetabular component, and conclude that the measurement of migration allows the comparison of implants, although there is no established link between migration and significant loosening. A method of measurement based on clinical radiographs has been developed, and its limitations estimated. The accuracy of the technique was calculated to be +/- 3 mm.