A primary goal of shoulder arthroplasty is to place the components in anatomic version. However, traditional instrumentation does not accommodate glenoid wear patterns. Therefore, many investigators have attempted to use computer modeling or CT-based algorithms to create custom targeting guides to achieve this goal. There are some recent studies investigating the use of custom guides. Iannotti et al. published in JBJS-American in 2012 on the use of
Introduction:. Total knee arthroplasty (TKA) is an effective operation for the management of osteoarthritis of the knee. Conventional technique utilizing manual instrumentation (MI) allows for reproducible and accurate execution of the procedure. The most common techniques make use of intramedullary femoral guides and either extrameduallary or intrameduallary tibial guides. While these methods can achieve excellent results in the majority of patients, those with ipsilateral hardware, post-traumatic deformity or abnormal anatomy may preclude the accurate use of these techniques. Patient-specific instrumentation (PSI) is an alternative innovation for total knee arthroplasty. Utilizing magnetic resonance imaging (MRI) or computed tomography (CT), custom guide blocks are fabricated based on a patient's unique anatomy. This allows for the benefits of computer assisted navigation (CAN) but without the increased operative times or the high learning curve associated with it. Furthermore it allows the use of familiar cutting blocks and guides to check the accuracy of the PSI guide blocks. In this study we sought to evaluate the accuracy of PSI techniques in patients with previous ipsilateral hardware, which would make the use of MI technically challenging and possibly subject to inaccuracy. Methods:. After reviewing our database of 300 PSI total knee arthroplasty patients, 16 patients were identified (10 male, 6 female) using the Zimmer NexGen
INTRODUCTION:. Despite clear clinical advantages Unicompartimetal Knee Replacement still remain an high demanding and less forgiving surgical procedure. Different Authors in literature pointed out how malalignment increases the rate of aseptic failure even more than in TKR. Computer-assisted surgery has been proposed to improve implant positioning in joint replacement surgery with no need of intramedullary guide despite no still proven clinical advantages. Likewise more recently
Introduction:.
Introduction.
Introduction.
Introduction:.
Background. In our pursuit of surgical accuracy and precision we often neglect to evaluate our results objectively. With the use of Computerised Tomography (CT) in pre-operative planning we can use the same technology in order to evaluate surgical accuracy. Hypothesis. The use of
Recent innovations in total ankle replacement (TAR) have led to improvements in implant survivorship, accuracy of component positioning and sizing, and patient outcomes. CT-generated pre-operative plans and cutting guides show promising results in terms of placement enhancement and reproducibility in clinical studies. The purpose of this study was to determine the accuracy of 1) implant sizes used and 2) alignment corrections obtained intraoperatively using the cutting guides provided, compared to what was predicted in the CT generated pre-operative plans. This is a retrospective study looking at 36 patients who underwent total ankle arthroplasty using a CT generated pre-operative planning system between July 2015 and December 2017. Personalized pre-operative planning data was obtained from the implant company. Two evaluators took measurements of the angle corrected using pre- and post-operative weight bearing ankle AP X-rays. All patients had a minimum three-month follow-up with weightbearing postoperative radiographs. The actual correction calculated from the radiographic assessment was compared with the predicted angles obtained from pre-operative plans. The predicted and predicted alternative component sizes and actual sizes used were also compared. If either a predicted or predicted alternative size was implanted, we considered it to be accurate. Average age for all patients was 64 years (range 40–83), with a body mass index of 28.2 ± 5.6. All surgeries were performed by two foot and ankle surgeons. The average total surgical time was 110 ± 23 minutes. Pre-operative alignment ranged from 36.7 degrees valgus to 20 degrees varus. Average predicted coronal alignment correction was 0.8 degrees varus ± 9.3 degrees (range, 18.2 degrees valgus to 29 degrees varus) and average correction obtained was 2.1 degrees valgus ± 11.1 degrees. Average post-op alignment was consistently within 5 degrees of neutral. There were no significant differences between the predicted alignments and the postoperative weightbearing alignments. The predicted tibia implant size was accurate in all cases. The predicted sizes were less accurate for talar implants and predicted the actual talar implant size used in 66% of cases. In all cases of predicted talar size mismatch, surgical plans predicted 1 implant size larger than used. Preliminary analyses of our data is comparable to previous studies looking at similar outcomes. However, our study had higher pre-operative deformities. Despite that, post-op alignments were consistently within 5 degress of neutral with no significant difference between the predicted and actual corrections. Tibial implant sizes are highly accurate while talar implant sizes had a trend of being one size smaller than predicted. Moreover, this effect seems to be more pronounced in the earlier cases likely reflective of increasing surgeon comfort with the implant with each subsequent case. These results confirm that pre-operative cutting guides are indeed helpful in intra-operative implant selection and positioning, however, there is still some room for innovation.
A preoperative planning for accurately predicting the size and alignment of the prosthetic components may allow to perform a precise, efficient and reproducible total knee replacement. The planning can be carried out using as a support digital radiographic images or CT images with three-dimensional reconstruction. Aim of this prospective study is to evaluate and compare the accuracy of two different types of pre-operative planning, in determining the size of the femoral and tibial component in total knee arthroplasty performed with Patient Specific Instrument (PSI). The two compared techniques were: digital radiography and “CT-Based”. A prospective study was conducted to compare the accuracy in predicting the size of the prosthetic components in total knee replacement in 71 patients diagnosed with primary and symptomatic osteoarthritis of the knee. Inclusion criteria was “Easy Knee”: BMI ≤ 35, varus/valgus deviation ≤15° and residual flexion of the knee ≥ 90°. Pre-operatively all the patients underwent to the same standard protocol including digital radiographs with calibration and a CT scan. A dedicated IMPAX digital software (Agfa-Gevaert, NV, USA) was used to template the radiographs. The CT-based planning was performed on 3D reconstruction of CT scans of 3 joints: hip, knee and ankle, as established in standardised protocol to build up patient specific cutting mask (MyKnee, Medacta, Castel S. Pietro, Switzerland). All the surgeries were performed by 2 senior Authors (M.A and N.C.) using the same implant and the definitive component sizes implanted were registered and compared with the sizes suggested by both planning techniques considering also the range of error. Results analysis was carried out using nonparametric tests.INTRODUCTION
MATERIALS AND METHODS
Accurate placement of the acetabular component during total hip
arthroplasty (THA) is an important factor in the success of the
procedure. However, the reported accuracy varies greatly and is
dependent upon whether free hand or navigated techniques are used.
The aim of this study was to assess the accuracy of an instrument
system that incorporates 3D printed, patient-specific guides designed
to optimise the placement of the acetabular component. A total of 100 consecutive patients were prospectively enrolled
and the accuracy of placement of the acetabular component was measured
using post-operative CT scans.Aims
Patients and Methods
Abstract. Background. Distal femoral osteotomy is an established successful procedure which can delay the progression of arthritis and the need for knee arthroplasty. The surgery, however, is complex and lengthy and consequently it is generally the preserve of highly experienced specialists and thus not widely offered.
The medial opening-wedge high tibial osteotomy (OW-HTO) is an accepted option to treat the isolated medial compartment osteoarthritis (OA) in varus knee. Despite satisfactory outcomes were described in literature, consistent complication rate has been reported and the provided accuracy of coronal alignment correction using conventional HTO techniques falls short.
CT-based three-dimensional (3D) pre-operative imaging along with 2D orthogonal sections defined by the plane of the scapula (axial, sagittal and coronal planes) has been demonstrated by many research groups to be a very accurate way to define the bone pathology and alignment/subluxation of the humeral head in relationship to the center line of the scapula or the center of the glenoid fossa. When 3D CT imaging is combined with 3D implant templating the surgeon is best able to define the optimal implant and its location for the desired correction of the bone abnormalities. The use and value of 3D imaging is best when the there is more severe bone pathology and deformity. Transferring the computer-based information of implant location to the surgical site can involve multiple methods. The three methods discussed in the literature to date including use of standard instrumentation in a manner specified by the pre-operative planning, use of single-use
The emergence of
Introduction. This is a multi-centre, prospective, observational study of 503 INFINITY fixed bearing total ankle arthroplasties. We report the minimum two-year results of this prosthesis which was introduced to the UK Market in 2014 and is now the most used ankle arthroplasty in the National Joint Registry of England and Wales. Methods. Patients were recruited from 11 centres in the United Kingdom between June 2016 and November 2019. Demographic, radiographic, and functional outcome data (Ankle Osteoarthritis Scale, Manchester Oxford Foot Ankle Questionnaire and Euroquol 5D-5L) were collected preoperatively, at 6 months, 1 year and 2 years and 5 years. The average age was 67.8 (range 23.9 to 88.5) and average BMI 29.3 (18.9 to 48.0). The COFAS grading system was used to stratify deformity. There were 261 (51.9%) COFAS Type 1, 122 (24.2%) COFAS Type 2, 31 (6.2%) COFAS 3 and 89 (17.7%) COFAS type 4. 38 patients (7.6%) presented with inflammatory arthritis. 99 (19.7%) implantations utilised
Aim. To asses the accuracy of total knee replacements performed using CT based
Contemporary techniques to perform total knee arthroplasty use either conventional instrumentation with intramedullary and extramedullary referencing or use a computer navigation system that requires insertion of femoral and tibial tracking pins and an intra-operative registration process. Much of the initial enthusiasm for computer navigation in TKA has waned as many of these systems have proved cumbersome, time consuming and expensive with no substantial evidence of a clinical benefit.
Introduction. Given the association of osteoarthritis with obesity, the typical patient requiring total knee arthroplasty (TKA) is often obese. Obesity has been shown to negatively influence outcomes following TKA, as it is associated with increased perioperative complications and poorer clinical and functional outcomes. Achieving proper limb alignment can be more difficult in the obese patient, potentially requiring a longer operation compared to non-obese
Abstract. Background. Conventional TKR aims for neutral mechanical alignment which may result in a smaller lateral distal femoral condyle resection than the implant thickness. We aim to explore the mismatch between implant thickness and bone resection using 3D planning software used for
Accurate glenoid component placement continues to be a challenge. Knowledge that glenoid loosening is affected by malpositioning of the glenoid component has led to the development of
High tibial osteotomy (HTO) is an effective surgical treatment for isolated medial compartment knee osteoarthritis; however, widespread adoption is limited due to difficulty in achieving the planned correction, and patient dissatisfaction due to soft tissue irritation. A new HTO system – Tailored Osteotomy Knee Alignment (TOKA®, 3D Metal Printing Ltd, Bath, UK) could potentially address these barriers having a custom titanium plate and titanium surgical guides featuring a unique mechanism for precise osteotomy opening as well as saw cutting and drilling guides. The aim of this study was to assess the accuracy of this novel HTO system using cadaveric specimens; a preclinical testing stage ahead of first-in-human surgery according to the ‘IDEAL-D’ framework for device innovation. Local ethics committee approval was obtained. The novel opening wedge HTO procedure was performed on eight cadaver leg specimens. Whole lower limb CT scans pre- and post-operatively provided geometrical assessment quantifying the discrepancy between pre-planned and post-operative measurements for key variables: the gap opening angle and the
Total knee arthroplasty is a successful procedure that reduces knee pain and improves function in most patients with knee osteoarthritis. Patient dissatisfaction however remains high, and along with implant longevity, may be affected by component positioning. Surgery in obese patients is more technically challenging with difficulty identifying appropriate landmarks for alignment and more difficult exposure of the joint.
Understanding the long-term effects of total knee arthroplasty (TKA) on joint kinematics is vital to assess the success of the implant design and surgical procedure. However, while in vitro cadaveric studies quantifying post-operative biomechanics primarily reflect joint behaviour immediately after surgery,. 1. in vivo studies comprising of follow-up TKA patients often reflect joint behaviour a few months after surgery. 2. Therefore, the aim of this cadaveric study was to explore the long-term effects of TKA on tibiofemoral kinematics of a donor specimen, who had already undergone bilateral TKA, and compare them to post-operative kinematics reported in the literature. Two fresh-frozen lower limbs from a single donor (male, age: 83yr, ht: 1.83m, wt: 86kg), who had undergone bilateral TKA (Genesis II, Smith&Nephew, Memphis, USA) 19 years prior to his demise, were obtained following ethical approval from the KU Leuven institutional board. The specimens were imaged using computed tomography (CT) and tested in a validated knee simulator. 3. replicating active squatting and varus-valgus laxity tests. Tibiofemoral kinematics were recorded using an optical motion capture system and compared to various studies in the literature using the same implant – experimental studies based on cadaveric specimens (CAD). 1,4. and an artificial specimen (ART). 5. , and a computational study (COM). 6. . Maximum tibial abduction during laxity tests for the left leg (3.54°) was comparable to CAD (3.30°), while the right leg exhibited much larger joint laxity (8.52°). Both specimens exhibited valgus throughout squatting (left=2.03±0.57°, right=5.81±0.19°), with the change in tibial abduction over the range of flexion (left=1.89°, right=0.64°) comparable to literature (CAD=1.28°, COM=2.43°). The left leg was externally rotated (8.00±0.69°), while the right leg internally rotated (−15.35±1.50°), throughout squatting, with the change in tibial rotation over the range of flexion (left=2.61°, right=4.79°) comparable to literature (CAD=5.52°, COM=4.15°). Change in the femoral anteroposterior translation over the range of flexion during squatting for both specimens (left=14.88mm, right=6.76mm) was also comparable to literature (ART=13.40mm, COM=20.20mm). Although TKA was reportedly performed at the same time on both legs of the donor by the same surgeon, there was a stark difference in their post-operative joint kinematics. A larger extent of intraoperative collateral ligament release could be one of the potential reasons for higher post-operative joint laxity in the right leg. Relative changes in post-operative tibiofemoral kinematics over the range of squatting were similar to those reported in the literature. However, differences between absolute magnitudes of joint kinematics obtained in this study and findings from the literature could be attributed to different surgeons performing TKA, with presumable variations in alignment techniques and/or
Introduction. Total knee arthroplasty is effective for the management of osteoarthritis of the knee. Conventional techniques utilizing manual instrumentation (MI) make use of intramedullary femoral guides and either extramedullary or intramedullary tibial guides. While MI techniques can achieve excellent results in the majority of patients, those with ipsilateral hardware, post-traumatic deformity or abnormal anatomy may be technically more challenging, resulting in poorer outcomes. Computer-assisted navigation (CAN) is an alternative that utilizes fixed trackers and anatomic registration points, foregoing the need for intramedullary guides. This technique has been shown to yield excellent results including superior alignment outcomes compared to MI with fewer outliers. However, studies report a high learning curve, increased expenses and increased operative times. As a result, few surgeons are trained and comfortable utilizing CAN. Patient-specific instrumentation is an alternative innovation for total knee arthroplasty. Custom guide blocks are fabricated based on a patient's unique anatomy, allowing for the benefits of CAN but without the increased operative times or the high learning curve. In this study we sought to evaluate the accuracy of PSI techniques in patients with previous ipsilateral hardware of the femur. Methods. After reviewing our database of 300 PSI total knee arthroplasty patients, 16 were identified (10 male, 6 female) using the Zimmer NexGen
The use of Patient Reported Outcome Measures (PROMS) has been critical to the success of total joint arthroplasty (TJA). They have made possible the evaluations of new implants, materials and surgical techniques that have been essential to the development of these technologies. PROMS have had a major impact on the decisions that surgeons make regarding treatment and care of patients. However, there are serious limitations of PROMS. They are useless in the first few weeks after surgery. They provide very little objective functional information to which health care providers can respond in the early, critical post-operative period. PROMS do not objectively measure specific outcome measures (e.g. ROM, distance walked). PROMS are also cumbersome and time consuming to use. Joint specific surface sensors are emerging to allow objective measurements of specific functional outcomes of knee surgery. This allows an examination of the factors that might affect these functional outcomes. The purpose of this study was to examine the relationship of age, gender, BMI and pain following TKA on ROM and activity measured using a joint specific surface sensor. Methods. 40 patients who underwent primary cruciate retaining TKA using the same implant system and
We present a new technique for TKA implantation which utilizes patient-specific femoral and tibial positioning guides developed from MRI to offer an individualized approach to total knee replacement. This is a prospective non controlled study which aims to analyse the precision of this technique, its advantages and inconvenients in comparison with the conventional instrumented technique. Material. The MRI provides a consistent three-dimensional data set of the patient's anatomy which allows for 3D axis identification. The ideal position and sizing is performed by the surgeon on this 3D model and the patient specific guides are manufactured in advance in order to reproduce the bone cuts corresponding to this positioning and implant size. There are no intramedullary nor extramedullary instruments during the surgery. Method. We compared 20 patients operated with this technique with 20 patients operated with the conventional technique. The hypothesis was a difference < 2° between the 2 techniques. The measured parameters were:. HKS, HKA, tibial slope, femoral rotation on CT. Duration, bleeding, pain on VAS and morphine consumption, active flexion, KSS, Oxford score, recovery of independant walking and delay of return to home. Both groups were identical for gender, age, BMI, etiology, comorbidities, pain and rehabilitation protocols. Results. There were no significant differences on HKA, HKS angles, femoral rotation, active flexion, pain, length of hospital stay. The surgery with the patient specific instruments was 10 minutes shorter than the conventional one (p < 0,05) and the bleeding was inferior with a ratio of 1/3 (p=0,02). There were no complications with this technique and the use of the conventional guides were never necessary with the
Introduction & aims.
Introduction. The degree of glenoid bone loss associated with primary glenohumeral osteoarthritis can influence the type of glenoid implant selected and its placement in total shoulder arthroplasty (TSA). The literature has demonstrated inaccurate glenoid component placement when using standard instruments and two-dimensional (2D) imaging without templating, particularly as the degree of glenoid deformity or bone loss worsens. Published results have demonstrated improved accuracy of implant placement when using three-dimensional (3D) computed tomography (CT) imaging with implant templating and
Objectives. To compare computer-assisted total knee arthroplasty with the conventional technique in operative time. Materials and Methods. 30 patients with different degrees and forms of knee osteoarthritis were divided into 2 groups. Group 1 (15 patients) had TKA using
A recent proposed modification in surgical technique in total knee arthroplasty (TKA) has been the introduction of
Computer Assisted Surgery (CAS) and
Introduction. With the development of 3D printing technology, there are many different types of PSI in the world. The accuracy of
Background. Virtual planning of shoulder arthroplasty has gained recent popularity. Combined with
Introduction. The effectiveness of
Treatment of osteoarthritis of the knee remains a challenging problem since the evolution of the disease may be different in each compartment of the knee, as well as the state of the ligaments. Total knee arthroplasty may provide a reliable long-lasting option but do not preserve the bone stock. In another hand, compartmental arthroplasty is a bone and ligament sparing solution to manage limited osteoarthritis of the knee affecting the medial, lateral or the patello-femoral compartment.1, 2, 3. Patient's selection and surgical indication are based on the physical examination and on the radiological analysis including full-length x-rays and stress x-rays. Clinical experience has shown the need for high flexion in patients who have both high flexibility and a desire to perform deep flexion. Additionally the shape differences related to anatomy or the patient expectations after the surgery may also affect the surgeon decision. 4. The limited incision into the extensor mechanism allows a quicker recovery which represents a functional improvement for the patient additionally to the cosmetic result. A dedicated physiotherapy starting on the following day allowing weight bearing exercises protected by crutches and focusing on early mobilization and range of motion combined to a multimodal pain management approach is critical despite the type of individualized solution chosen for the patient knee. 5. Since bony landmarks may be different form a patient to another one as well as anatomical shapes, several tools have been developed in order to provide the surgeons an assisted tool during the surgery adapted to each knee, this include navigation,
Background. Obtaining accurate alignment in total knee arthroplasty (TKA) remains a concern.
The most recent Australian registry has a database of 547,407 knee arthroplasties, having added over 52,000 in 2016. Total knee arthroplasties (TKA) comprise 83.8%, revisions (RevTKA) 8.1% and “partials of all types” 8.1%. Since 2003, the percent of TKA has increased from 76.7%, RevTKA has stayed stable and partial replacements have declined from 14.5%. In the last year, however, TKA declined slightly. There is a slightly higher percentage of women (56.1%) undergoing TKA and this has remained very stable since 2003. Revision rates are slightly higher for men. Percentages of the youngest (<55) and oldest (>85) are small and stable. The 75–84 year olds have declined as 55–74 year olds have increased. This represents a gradual shift to earlier TKA surgery. More patella are resurfaced and this is a gradual trend with a cross over in 2010 when half were resurfaced. Computer navigation is progressively more popular and now accounts for almost 30% of cases. Cement fixation is also increasing and accounts for about 65% of cases. Crosslinked polyethylene is gradually replacing non crosslinked and in 2014 was used in 50% of cases. Revisions are performed most commonly for loosening and infection. Revision rates correlate directly with age. Loosening is the most common indication for revision in both genders, but males have a distinctly higher revision rate due to infection. Revision rates are slightly higher in all forms of mobile bearing than fixed bearing. Minimally constrained (cruciate retaining) devices are used in the majority of TKAs. Posterior stabilised implants are in slight decline, having peaked in about 2008–2010. Minimally constrained implants are in slight decline as medial pivot/medial congruent devices have been used more frequently. Revision rates are similar amongst all three implant types: PS implants are revised at a slightly higher rate. When an early Medial Pivot (MP) implant is excluded the newer version has better results. The reasons for revision are similar amongst all 3 groups with slightly higher loosening rates for PS designs. (Could this represent backside wear with older locking mechanisms, surface finish and non crosslinked poly?) The MP designs had slightly higher revision rates for “pain”, which is not recognised as a reasonable indication for revision. Revision rates are steadily higher for TKAs without patella resurfacing over 16 years, but the questions as to whether: i. the surgeries were secondary resurfacings or full revisions or ii. if secondary resurfacings eliminated pain are unknown. The combinations at greatest risk of revision were a posterior stabilised or medial pivot arthroplasty without patellar resurfacing. Cementless fixation leads to a higher revision rate. If age and computer navigation are evaluated in terms of revision rates, young patients with and without computer navigated arthroplasties failed at the highest rates, distinct from patients >65. However, if failure rates due only to loosening are evaluated, then computer navigation leads to a lower revision rate in the <65 group. This has been interpreted as the protective effect of better component position that only shows up in patients who use the arthroplasty more aggressively.
Accurate implant placement is important to the success of joint replacement surgery. Three dimensional pre-operative planning optimizing the ability to define the anatomy and select the desired implant and its location. Linking this information into implant and
Retroversion, also referred to as posterior wear of the glenoid, can make resurfacing the glenoid challenging. However, careful pre-operative planning with three dimensional CT scanning can allow central placement of the glenoid component through removal of some of the anterior bone to allow contained placement and secure fixation within the glenoid vault. Since the scapula is not a fixed skeletal structure and moves substantially on the chest wall, the actual degree of posterior wear (retroversion) frequently is the result of extraneous biomechanical forces and structures. For example, the degree of kyphosis and shape of the rib cage can have a substantial impact on the relative position of the glenoid surface as it articulates with the humerus. Attempts to totally equalise this through implant augmentation have not, to date, been shown to be effective, and in some cases can be destabilising. Restoration of enough alignment to place the implant centrally can be achieved without need for augmentation even in some very hypoplastic glenoids. The technique for this straight-forward approach will be presented, including pre-surgical planning, in some cases,
Introduction. Optimal orthopaedic implant placement is a major contributing factor to the long term success of all common joint arthroplasty procedures. Devices such as 3D printed bespoke guides and orthopaedic robots are extensively described in the literature and have been shown to enhance prosthesis placement accuracy. These technologies have significant drawbacks such as logistical and temporal inefficiency, high cost, cumbersome nature and difficult theatre integration. A radically new disruptive technology for the rapid intraoperative production of
Anatomic and accurate placement of components is a primary goal in all arthroplasty procedures. Unique to total shoulder arthroplasty, challenging glenoid exposure and osteoarthritic glenoid deformity offer significant challenges and impediments to this goal. Despite thorough pre-operative planning strategies and contemporary cannulated pin-based shoulder systems, it is often times still difficult to accurately aim the guide pin to the medial border of the scapula when the deformity is substantial or exposure is difficult. Even small errors in guide pin position can result in problems with final component version, inclination and glenoid vault perforation. In addition, a malpositioned glenoid component has been shown to have a negative impact on implant longevity and clinical performance. Image-based
The final alignment of
Introduction. Patients undergoing total knee arthroplasty have expected blood loss during and after surgery. The current literature remains inconclusive in regards to which surgical instrumentation techniques in total knee arthroplasty are effective in minimising peri-operative blood loss. The primary objective of this retrospective review of a prospective randomized cohort study is to compare surgical and patient factors and their influence on blood loss and transfusions rates between one type of
Introduction. Surgical planning for
Background.