Primary stability is achieved by the press fit technique, where an oversized component is inserted into an undersized reamed cavity. The major geometric design of an acetabular shell is hemispherical type. On the other one, there are the hemielliptical type acetabular shells for enhanced peripheral contact. In the case of developmental dysplasia of the hip (DDH), the aseptic loosening may be induced by instability due to decreased in the contact area between the acetabular shell and host bone. The aim of this study was to assess the effect of reaming size on the primary stability of two different outer geometry shells in DDH models. The authors evaluated hemispherical (Continuum Acetabular Shell, Zimmer Biomet G.K.) and hemielliptical (Trabecular Metal Modular Acetabular Shell, Zimmer Biomet G.K.) acetabular shells. Both shells had a 50 mm outer diameter and same tantalum 3D highly porous surface. An acetabular bone model was prepared using a solid rigid polyurethane foam block with 20 pcf density (Sawbones, Pacific Research Laboratories Inc.) as a synthetic bone substrate. Press fit conditions were every 1 mm from 4 mm under reaming to 2 mm over reaming. To simulate the acetabular dysplasia the synthetic bone substrate was cut diagonally at 40°. Where, the acetabular inclination and cup-CE angle were assumed to 40° and 10°, respectively. Acetabular components were installed with 5 kN by a uniaxial universal testing machine (Autograph AGS-X, Shimadzu Corporation). Primary stability was evaluated by lever-out test. The lever-out test was performed in 4 mm undersized to 2 mm oversized reaming conditions. Lever out moment was calculated from the multiplication of the maximum load and the moment arm for primary stability of the shell. The sample size was 6 for each shell type.Introduction
Materials and methods
We used a polymerase chain reaction (PCR) lateral flow assay1) to rapidly diagnose joint infection. We evaluated the usefulness of multiplex-PCR (PCR lateral flow assay: PCR-LF) using detailed clinical data. A total of 35 synovial fluid samples were collected from 26 patients in whom bacterial infection was suspected, including 22 from knee joints, 11 from hip joints, and 2 from other joints. After purifying the DNA from the samples, multiplex PCR targeting two MRSA-associated genes (Aim
Method
The preparation of antibiotic-containing polymethyl methacrylate (PMMA), as spacers generates a high polymerization heat, which may affect their antibiotic activity; it is desirable to use bone cement with a low polymerization heat. Calcium phosphate cement (CPC) does not generate heat on polymerization, and comparative elution testings are reported that vancomycin (VCM)-containing CPC (VCM-CPC) exceeded the antibiotic elution volume and period of PMMA (VCM-PMMA). Although CPC alone is a weak of mechanical property spacer, the double-layered, PMMA-covered CPC spacer has been created and clinically used in our hospital. In this study, we prepared the double-layered spacers: CPC covered with PMMA and we evaluated its elution concentration, antimicrobial activity and antibacterial capability. We prepared spherical, double-layered, PMMA-coated (CPC+PMMA; 24 g CPC coated with 16 g PMMA and 2 g VCM) and PMMA alone (40 g PMMA with 2 g VCM) spacers (5 each). In order to facilitate VCM elution from the central CPC, we drilled multiple holes into the CPC from the spacer surface. Each spacer was immersed in phosphate buffer (1.5 mL/g of the spacer), and the solvent was changed daily. VCM concentrations were measured on days 1, 3, 7, 14, 28, 56, and 84. Antimicrobial activity against MRSA and MSSA was evaluated by the broth microdilution method. After measuring all the concentration, the spacers were compressed at 5 mm/min and the maximum compressive load up to destruction was measured.Aim
Method
On the basis of a proposal by Noble, the marrow cavity form can be classified into three categories: normal, champagne-fluted and stovepipe. In the present study, three typical finite element femoral models were created using CT data based on Noble's three categories. The purpose was to identify the relationship of stress distribution of the surrounding areas between femoral bone marrow cavity form and hip stems. The results shed light on whether the distribution of the high-stress area reflects the stem design concept. In order to improve the results of THA, researchers need to consider the instability of a stem design based on the stress distributioin and give feedback on future stem selection. As analyzing object, we selected SL-PLUS and BiCONTACT stems. To develop finite element models, two parts (cortical bone and stem) were constructed using four-node tetrahedral elements. The model consisted of about 60,000 elements. The material characteristics were defined by the combination of mass density, elastic coefficient, and Poisson's ratio. Concerning the analysis system, HP Z800 Workstation was used as hardware and LS-DYNA Ver. 971 as software. The distal end of the femur was constrained in all directions. On the basis of ISO 7206 Part 4,8 that specifies a method of endurance testing for joint prostheses, the stem was tilted 10°, and a 1500 N resultant force in the area around the hip joint was applied to the head at an angle of 25° with the long axis. Automatic contact with a consideration of slip was used.Introduction
Methods
Proximal humeral fracture occurs most frequently in elderly and usually unite within 12 weeks. Malunion is more common than nonunion. And even if nonunion occurs, we usually treat it by the blade plate. Norris et al. reported hemiarthroplasty is indicated for severe degenerative changes of the articular surface, osteonecrosis of the humeral head, or osteopenia severe enough to jeopardize fixation in order patients. Therefore, it is not common that hemiarthroplasty is used for primary treatment of the proximal humeral pseudoarthrosis. We report a case of proximal humerus pseudoarthrosis which was treated by hemiarthroplasty. A patients is 75 years old male. He was injured by falling from ladder. He was diagnosed proximal humeral fracture Neer type2. After he was followed conservatively for one year, he was referred to our hospital. In X-ray film and CT, the humeral head was scraped by the humeral shaft that was tucked inward to humeral head.(Figure 1) In MRI, rotator cuff muscles were left. The fatty infiltration was stage 1 in the Gourtallier classification. (Figure 2)And osteoarthritis of shoulder was not so severe. Therefore, we decided to do hemiarthroplasty. We used the SMR implant (Lima Corporate, Milano, Italy). Surgical reconstruction was done using a deltpectral approach. Lesser tuberosity was cut from greater tuberosity with subscaplaris muscle. We used the cementless stem. Each fragments and stem was fixed using FiberWire (Arthrex, Florida USA), after autograft which scraped from the reseceted humeral head was stuffed. After the operation, the shoulder was fixed by brace for 4weeks. The passive ROM exercise was started from 21 days later. The Active ROM exercise was started at 28 days later. Three months later, the pseudoarthrosis united successfully. (Figure 3) The active flexion was improved from 20 degrees to 110 degrees. The active abduction was from 20 degrees to 90 degrees. USLA score was improved from 10 to 26.Introduction
Case
According to proposal of Noble, the femoral bone marrow cavity form of patients who underwent Total Hip Arthroplasty (THA) can be classified under 3 categories; those are Stovepipe, Normal and Champagne-fluted. We developed typical sodium chloride femoral model was created by 3D prototyping technique. The purpose was to identify the relationship of pressure zone of the surrounding areas between femoral bone marrow cavity form and hip stem. As opponent clarified stem design concept Zweymüller type model was used. According to CT data with the patients who underwent THA, the sodium chloride femoral model was custom-made and selected as the representative model based on Noble's 3 categories. Eight models of each category were used to performed mechanical test.Introduction
Materials and Method
On the basis of a proposal by Noble, the marrow cavity form can be classified into three categories: stovepipe, normal, and champagne-fluted. In the present study, three typical finite element femoral models were created using CT data based on Noble's three categories. The purpose was to identify the relationship of stress distribution of the surrounding areas between femoral bone marrow cavity form and hip stem. The results shed light on whether the distribution of the high-stress area reflects the stem design concept. In order to improve the results of THA, researchers need to consider the instability of a stem design based on the pressure zone and give feedback on future stem selection. To develop finite element models, two parts (cortical bone and stem) were constructed using four-node tetrahedral elements. The model consisted of about 40,000 elements. The material characteristics were defined by the combination of mass density, elastic coefficient, and Poisson's ratio. Concerning the analysis system, HP Z800 Workstation(HP, Japan) was used as hardware and LS-DYNA Ver. 971 (Livermore Software Technology Corporation, USA) as software. The distal end of the femur was constrained in all directions. On the basis of ISO 7206 Part 4,8 that specifies a method of endurance testing for joint prostheses, the stem was tilted 10°, and a 500 N resultant force in the area around the hip joint was applied to the head at an angle of 25° with the long axis. Automatic contact with a consideration of slip was used. Von Mises stress during a 1.0 s period after loading was analyzed, and stress distribution in the stem and its maximum value were calculated.Introduction
Methods
Fracture during total hip arthroplasty occurs partly because the acquisition of fixation at the time of stem implantation depends on the operator's experience and sensation due to the absence of definite criteria. Therefore, an objective evaluation method to determine whether the stem has been appropriately implanted is necessary. We clarified the relationship between the hammering sound frequency during stem implantation and internal stress in a femoral model, and evaluated the possible usefulness of hammering sound frequency analysis for preventing intraoperative fracture. Three types of cementless stem were used. Orthopedists performed stem insertion using a procedure similar to that employed in routine operation. Stress was estimated by finite element analysis using the hammering force calculated from the loading sensor as a loading condition, and frequency analysis of hammering sound data obtained using a microphone was performed (Fig. 1). Finite element analysis showed a decrease in the hammering sound frequency with an increase in the estimated maximum stress (Fig. 2, 3). When a decrease in frequency was observed, adequate hammering had already been performed to achieve press-fit stability. Therefore, there is a possibility that the continuation of hammering induces intraoperative fractures that become a problem. Based on the relationship between stress and frequency, the evaluation of changes in frequency may be useful for preventing the development of intraoperative fractures. When a decrease in frequency is observed, the hammering force should be reduced thereafter. Hammering sound frequency analysis may allow the prediction of bone fractures that can be visually confirmed, and may be a useful objective evaluation method for the prevention of intraoperative bone fracture.
The purpose of this study is to prove whether Japanese patients undergoing primary total hip arthroplasty (THA) for the hip dysplasia were able to return to sport after surgery. A questionnaire survey was completed by 77 patients in 9 males and 68 females between 1 and 3 years after surgery. Mean age at surgery was 66.1 (range, 49 to 87). In the 3 years before surgery 40 (51.9%) patients were participating in sport. By 1 to 3 years after surgery 43 (55.8%) patients were participating in sport. A total of 33 (82.5%) had returned to their sporting activities by 1 to 3 years after surgery in groups who played sports before surgery and 7 (17.5%) were unable to do with the most common reason being “cannot move as much as I wanted”. On the other hand, a total of 10 (27%) had started playing sports after surgery. The sports activities after surgery were the most common being walking, radio calisthenics, and swimming as low-impact sports. A total of 27 (73%) did not play sports before or after surgery with the most common reason being “fear of damage to the hip joint”. In conclusion, when Japanese patients who have undergone THA for hip dysplasia choose to participate in sports, orthopedic surgeons should provide information with which to evaluate the risk of sports activity and recommend appropriate sports activity.
Curved varus intertrochanteric osteotomy of the femur is an excellent and minimally invasive method for the treatment of osteonecrosis of the femoral head or osteoarthritis of the hip for joint preservation. However, the early postoperative complications of this procedure may be due to separation at the osteotomy site and an increase in varus angle due to early partial weight bearing. We modified the curved varus intertrochanteric osteotomy of the femur by performing an additional rotation. Regarding the surgical technique, curved varus osteotomy is performed at an angle of 30 degrees to the femoral shaft and an additional rotational osteotomy is also performed at an angle of 15 or 20 degrees to the osteotomy plane. Partial weight bearing with one-third body weight is permitted 3 weeks after surgery.Introduction
Methods
In recent years, the progressive technology of hemodialysis provides long-term survival for renal failure patients. On the other hand, avascular necrosis of the femoral head from the use of steroids or renal osteodystorophy or femoral neck fracture due to amyloid arthropathy have increased. In such cases, bipolar femoral head prosthesis (FHP) and total hip replacement (THR) are usually performed. But it is at risk of developing severe complications, such as early loosening or infection of the implant. The aim of this study is to evaluate the stability of the cementless stems in radiograms and clinical results after FHP or THR using three types cementless prosthesis in hemodialysis patients. The study included 14 patients (19 hips) on hemodialysis who underwent FHP or THR using three types cementless prosthesis at our institution between 1983 to 2005 and we could follow up at least two years. There were 8 women (11 hips) and 6 men (8 hips) with an average age of 43.9 years (range, 20–88). The average follow-up was 6.75 years. The average hemodialysis term was 10.5 years. Three types of hip prosthesis (7 stems were CLS, 6 stems were IMC, 6 stems were Duetto S-I) has been used for the treatment at our institution in the past. The initial diagnosis was avascular necrosis of the femoral head in 8 hips, femoral neck fracture in 5, osteoarthritis in 4 and amyloid arthropathy in two. We assessed at least 3° of varus-valgus deviation or at least 3 mm of subsidence as aseptic loosening of stems, and assessed radiolucent line and stress shielding of the stems in radiograms, also. As for clinical results, we measured postoperative infection rate and revision rate. Aseptic loosening of stems were identified in 3 hips (15.8%). Radiolucent lines were identified in 5%–26% of hips categolised by Gruen’s classification zone I-VII, although their zones differed according to the stem model. Stress shieldings were identified in 10 hips (53%), most of which were level 1, according to the criteria described by Engh et al. Infection rate and revision rate were 5.3% (1 hip) and it was a long-term hemodialysis patient. Several studies report, there is a high probability that early loosening of the stems is associated with amyloid deposition. We experienced early loosening of the stems in our case and considered prevention of amyloid deposition very important in improving the prognosis of the arthroplasty. We must follow carefully hemodialysis patients after an operation because their nutrition level is low and their bodies are compromised due to steroids use and their postoperative infection rate is high.
On the basis of observations made in recent years, it can be inferred that the incidence of venous thromboembolism (VTE) in Japan is as high as that in Western countries. Since 2007, the use of fondaparinux for the prophylaxis of VTE following lower-limb orthopedic surgery has been approved for Japanese patients. This study was performed with an aim to investigate the safety and efficacy of fondaparinux for the prevention of VTE following hip surgery in Japanese patients. From June 2007 to August 2008, we evaluated 141 consecutive patients (148 hips; average age, 65.6) undergoing total hip replacement (THR), consisted of cementless minimally invasive surgery, and hip fracture surgery (HFS), consisted of open reduction and internal fixation or bipolar hemiarthroplasty. We mainly used 2.5 mg of fondaparinux for a period extending up to 14 days. We estimated the symptomatic VTE and asymptomatic deep-vein thrombosis (DVT) rates in patients by ultrasonography performed on preoperative and postoperative day 3. In addition, we evaluated the pre-operative and postoperative plasma D-dimer levels on days 3, 7, and 14. We determined that both the preoperative and postoperative incidence of symptomatic VTE was 0%. A D-dimer value of 20 ug/ml or higher was not observed on preoperative days 3 and 7; however, this value was observed in 2 hips on postoperative day 14. The incidence of asymptomatic DVT was observed to be 0.8% preoperatively and 4% postoperatively. In particular, the corresponding value following HFS was observed to be 7.7% preoperatively. The incidence of the hemorrhagic event was observed to be 14.9%. Bleeding was mostly observed in the surgical and drainage areas. An overall major bleeding incidence of 0.7% (1 patient) was observed. The corresponding value in patients in whom the administration of fondaparinux was discontinued by day 14 was 18.9%. The study results indicate that fondaparinux is useful in Japanese patients for the prevention of VTE following hip surgery. However, the administration of this drug should be accompanied by additional measures to prevent the associated side effect of bleeding.
Several stems have been used for revision of total hip replacement (THR). Moreover, management of proximal femoral bone loss at the time of revision THR remains one of the challenges for hip surgeons. Recently, impaction bone grafting has been suggested to resolve this problem, but it is a demanding technique that results in frequent complications. We have used the Wagner self-locking stem with cancellous chip allograft for reconstruction of proximal femoral bone defect during revision surgery since 1992. This study evaluated the midterm results of using Wagner revision stem with bone allograft for femoral revision of THR. We could evaluate forty-one femoral revisions performed between 1992 and 2005 using Wagner revision stem with bone allograft. All patients had been followed for a minimum of three years with a mean follow-up of 8.6 years. Preoperative radiological femoral bone defects were assessed and classified by Gustillo’s classification. Subsidence of the stem was measured on radiograms taken immediately after revision surgery and again at the latest follow-up. Femoral component fixation was graded as radiographic ingrowth, fibrous stable, or unstable according to the criteria described by Engh et al. The incidence of surgical complications was examined. Allografts were assessed for incorporation into host bone as evidenced by trabecular bridging of the host-graft interface. A clear reduction in density or breakdown of the allograft was defined as bone resorption. Kaplan-Meier survival analysis was performed. The end point was revision because of mechanical loosening of the stem. Bone defects were classified as: 10 hips type I, 20 hips type II, and 7 hips type III and 4 hips were a periprosthetic fracture. Subsidence was measured at the time of last follow-up in six hips (3, 3, 12, 16, 21, 30 mm). At the latest follow-up 37 of 41 stems were stable. Allograft incorporation could clearly be observed in the proximal femoral bone defects of 31 stems. Three stems were defined as showing bone resorption. Surgical complications included 11 intraoperative fractures, two femoral shafts were perforated during reaming, one dislocation postoperatively, and 3 greater trochanter pseudoarthroses. There was one deep infection, and these cases were excluded from survivorship analysis. One unstable stem and one stem with infection had to be revised. Kaplan-Meier survival was 97.1 % at 10 years. Wagner self-locking stem with allograft for reconstruction for proximal femoral bone defect in revision surgery is a beneficial procedure. However, because there is a high incidence of intraoperative fractures, surgery should be performed carefully.
Management of severe acetabular bone loss at the time of revision total hip replacements (THR) remains has been one of the greater challenges for hip surgeon. Recently, many methods of acetabular reconstruction have been described and various materials are used for supplement of the bone stock deficiency in acetabular revision THR. The purpose of this study was to evaluate the midterm results of the using support ring with bone allografts in acetabular revision THR.
From 1990 to 2005, forty-six acetabular revisions using supporting ring with bone allografts were performed at our institution. All patients were followed up for a minimum of three years with a mean follow-up of 7.5 years. Pre-operative radiological acetabular bone defects were assessed and classified by author’s classification (Itoman’s classification). Radiological analysis involved a general qualitative evaluation. The position of the acetabular reinforcement ring was measured on radiograms, taken immediately after revision surgery and again at the time of last follow-up. Using a MEM template, cranio-central migration and cup inclination angle were measured. Kaplan-Meier survivorship analysis was performed. The end point was revision because of mechanical loosening of the acetabular implant. We used thirty-six Ganz rings, six Müller rings, three Kerboull T-plate and two Burch-Schneider anti-protrusion cages. The acetabular bone defects were classified as: 10 hips Type B (central defect), 9 hips Type C (cranial defect), 27 hips Type D (cranial-central defect). Migration of acetabular component was defined as a change of >
5mm in the cranial or central direction of the cup or a change in the cup inclination angle of >
5° at the time of last follow-up. All the Eleven acetabular components which had defined as loose were Type D. One acetabular component was revised because of mechanical loosening, four were revised because of infection, and one was broken polyethylene liner. Kaplan-Meier survivorship of these reconstructions was 96.2 % at 10 years. Allograft reconstruction of acetabular bone defect in revision total hip replacement is beneficial procedure. The remaining pelvic bone is usually in poor condition, therefore, it is necessary to ensure primary fixation with the reinforcement ring with bone allografts.
Infected hip prosthesis, a devastating complication of primary total hip arthroplasty (THA) can lead to a serious condition. We report here the treatment outcome of our method of two-stage revision THA for infected hip arthroplasty using a temporary antibiotic-impregnated cement spacer for the period between resection and reimplantation. Between 1996 and 2000, we performed two-stage revision THA using a temporary antibiotic-impregnated cement spacer on eight hips in eight patients with infected hip arthroplasty including hemiarthroplasty, with the infection presenting itself between four days and 19.4 years after last operation. There were four females and four males, with a mean age of 67 years (58 to 72). The mean period of follow-up was 2.5 years (0.3 to 4.3). Cementless THA was implanted as the second srage procedure. Bone defects were restored with frozen allografts. The clinical outcome was evaluated using the hip score of the Japanese Orthopaedic Association (JOA hip score). The duration of follow-up was 33.9 months (range, 8 to 55 months). The mean JOA hip score at follow-up improved from 32.6 (19 to 74) to 77.1 (59 to 96). The mean interval period was 10.3 weeks (range, 6 to 19 weeks). Seven patients with infected hip arthroplasty successfully received implantation by two-stage cement-less revision THA. One patient with MRSA infection had a recurrence after four months of revision of THA. However, the two-stage procedure using a vancomicin-impregnated bone cement spacer and beads implantation successfully treated this patient 14 months after the first revision of THA. No recurrence of infection was found at 42 months of follow-up. These results suggest that two-stage revision THA using a temporary antibiotic-impregnated cement spacer is a useful technique for infected hip arthroplasty.
The aim of this study is to compare the clinical results of the Pin-Sleeve System (AI Wiring System; AIWS) with the Dall-Miles Cable Grip System (DMCGS) for reattachment after dissection of the greater trochanter in hip arthroplasty. The DMCGS was used in 33 cases 35 hips from 1994 to 1998 and AIWS in 40 cases 42 hips from 1998 to 2001. The age at operation was 61.3 years (24 to 85 years) in the DMCGS group and 67 years (24 to 86 years) in the AIWS group. The postoperative follow-up period was 24 months (4 months to 54 months) in the DMCGS group and 30 months (11 months to 42 months) in the AIWS group. Bone union failure of the great trochanter occurred in the DMCGS group eight hips (22.9%) and AIWS group five hips (11.9%). The DMCGS group four hips (11.4%) had broken cables, while not even one case of the AIWS group had them (p<
0.05). Fragments from the cable were found in the DMCGS group seven hips (20%) and AIWS group two hips (4.8%). Bone resorption around the cable, grip or sleeve occurred in the DMCGS group 19 hips (54.3%) and AIWS group five hips (11.9%) (p<
0.05). Clinically, the DMCGS group 13 hips (37.1%) and AIWS group seven hips (16.7%) had dysphoria at the greater trochanter; the DMCGS group 17 hips (48.6%) and AIWS group eight hips (19%) had pain at the greater trochanter in the recumbent position with the affected side down (p<
0.05); the DMCGS group 13 hips (37.1%) and AIWS group six hips (14.3%) had pain on exertion. The AIWS is considered to be a useful implant for reattachment of the greater trochanter compared with the DMCGS.
