Summary

Revision TKA using CCK prosthesis showed comparable outcome to PS prosthesis in clinical and radiological results.

Introduction

Many literatures regarding more specific tests to diagnose the supraspinatus tendon injuries and the best rehabilitation methods to strengthen the supraspinatus have been published. However, conflicting results have been reported. 2-deoxy-2-[18F] fluoro-D-glucose (FDG) positron emission tomography (PET) has been recently used to assess skeletal muscle activities in various fields.

Summary

UC TKA showed similar anteroposterior translation and more femoral external rotation of earlier onset when compared to PS TKA.

Early failure of metal-on-metal (MoM) total hip replacements (THR) is now well established. We review 93 consecutive patients with CPT¯ stems MoM THR. Our series demonstrates a new mechanism of failure, which may be implant combination specific.

Between January 2005 and June 2009, 93 consecutive MoM total hip replacements were preformed using CPT stems by 3 surgeons at our unit. 73 CPT¯ stems, Metasul¯ Large Diameter Heads (LDH) with Durom¯ acetabulae and 20 CPT¯ stems, Metasul¯ 28mm diameter heads in Allofit¯ shells (zimmer). Clinical outcomes were collected prospectively before surgery, at 3 months, 1 year, 2 years, 3 years, and at 5 years post surgery. Revision for any cause was taken as the primary endpoint and the roentgenograms and explanted prostheses were analyzed for failure patterns.

In the LDH/Durom¯ group a total of 13 (18%) patients required revision (figs. 1) at a median of 35 months (range 6-44). 6 (8%) for periprosthetic fracture. All 6 periprostethic fractures were associated with minimal or no trauma and all had ALVAL identified histologically.

To date there have been no failures in the CPT¯/28mm head Allofit¯ group. Several failures demonstrated bone loss in Gruen zones 8 ± 9 ± 10 (fig. 2).

We demonstrate an unacceptably high rate of failure in CPT¯ MoM LDH hip replacements, with a high failure secondary to periprosthetic fracture and postulate a mechanism associated with local toxicity to metal ions. We strongly advise against this combination of prosthesis.

Background: MRSA is a major economic and health issue in Ireland and as such is of particular importance in the appropriate management of orthopaedic patients. Bone, joint and implant infection can lead to unfavourable outcomes with a long protracted in hospital stay inevitable. The cost for the patient, the hospital and society are substantial. Numerous protocols have been proposed internationally to aid in the management of MRSA infection in orthopaedic patients with pre assessment and ring fencing of patients shown to have a favourable impact.

Aims: To analyse the impact of a series of infection control measures on the infection and prevalance of MRSA in both elective and trauma orthopaedic patients.

Methods: We conducted a prospective study of our unit over three time points from 2005 to 2008. All elective and trauma orthopaedic surgery was based in Merlin Park Hospital up until December 2006. Since then all elective orthopaedic surgery has remained based in Merlin Park Hospital with all trauma surgery being moved to University Hospital Galway and all trauma patients based in an exclusively ring fenced orthopaedic ward. We recorded total rates of MRSA infection and colonisation in all orthopaedic patients over nine months of each year from 2005 to 2008, pre and post separation of trauma and elective services. Of note a pre admission screening protocol was implemented in March of 2006. We also prospectively recorded all MRSA data in patients treated through our ring fenced trauma ward from its opening date in November 2006.

Results: 12259 patients were reviewed between 2005 and 2008. The mean age of all admitted patients was 46 with th emean age of all MRSA positiv epatients being 71(p=0.000). There was no statistical difference for gender distribution between MRSA positive patients, but more women were positive than men.

The rates of MRSA infection for 2005, 2006 and 2007 were 0.49%, 0.28% and 0.24% respectively (binomial comparison, 2005 to 2006, p< 0.005 and 2005 to 2007, p< 0.005). Again when trauma and elective units were seperated there was a corrected rate of infection of 0.14% and 0.33% respectively. In 2005 there was 9 Superficial Incisional (SI), 8 Organ Space Infection(OSI) and 4 Deep Incisional (DI), 2006 had 7 SI, 4 OS and 4 DI and in 2007 there was 9 SI, 9 OS and 1 DI seen in the elective unit There was no Deep MRSA infection seen in the new ring fenced trauma unit. MRSA infection was found to cause a considerable increase in length of stay with normal orthopaedic patients staying a mean of 5 days whilst MRSA patients staying 23.4 days (p=0.000).

Conclusion: The separation of emergency and elective orthopaedic services coupled with effective preoperative screening has resulted in a reduction of MRSA infection and improved patient outcome.

The minimal invasive total knee arthroplasty has demonstrated shorter hospital stays, less postoperative blood loss, and less pain associated with these techniques but concerns are raised about inaccurate implant alignment due to limited visibility. The combination of computer assisted arthroplasty and MIS could aid in the improvement of the accuracy of implantation.

This prospective randomized study presents the initial results of the first 25 cases of two different imageless computer-assisted arthroplasty, the Orthopilot(B. Braun-Aesculap, Tuttlingen, Germany) and the Ci navigation system(DePuy, Munich, Germany). The same surgeon performed all TKA procedures using the minimidvastus approach. Coronal and sagittal alignments of the femoral and tibial components were determined using postoperative full length radiographs.

Comparison of the 2 groups demonstrated no difference in postoperative limb alignment, femoral and tibial coronal alignment, and sagittal tibial alignment. The sagittal alignment between the 2 groups showed different results. The Orthopilot group showed a tendency toward flexion of the femoral components, and the Ci navigation group showed a tendency toward extension of the femoral components. The tourniquet time was longer by an average of 16minutes in the Ci navigation group. One complication of femoral fracture through the pin site occurred in the Orthopilot group. Combined CAS and MIS has he advantage in improving the accuracy of component alignment but caution is needed for improving sagittal femoral component alignment.

The aim of this study was to evaluate the rotational axis of the tibia and the association of its axis to tibial coronal alignment after TKR.

TKRs were performed using navigated mobile bearing system (40 knees), conventional mobile bearing (48 knees) and conventional fixed bearing (40 knees) and preoperative and postoperative CT scans were assessed using 3D image reconstruction-analysis program. The tibial AP axis which was defined as the line connecting the middle of the PCL and the medial edge of the patellar tendon attachment was measured relative to the AP axis of distal femur preoperatively and postoperatively, as well as the coronal angle of the tibia and posterior slope. The tibial coronal alignments in navigation, postoperative plain radiograph and CT were compared.

The AP axis of the tibia was in 2.10° internally rotated position relative to the AP axis of the femur preoperatively and 3.54° postoperatively (range, 19.5° internal rotation to 16.8° external rotation). The coronal angle of the tibia was 0.46° varus on plain radiograph, 0.72° varus on CT, 0.37° valgus in navigation (p=0.005). Posterior slope was 2.53° on plain radiograph and 0.67° in navigation (p< 0.001). There was no correlation between postoperative rotational position of the tibia relative to the femur and the difference in the tibial coronal angle between navigation data and CT.

The proposed anteroposterior axis of the tibia centered between 0 to 5 degrees internally rotated position relative to the femur but showed wide range of deviation. The rotation angle of the tibial cutting in navigated TKR did not influence on the postoperative measurement discrepancy between navigation and CT.

Hyaluronic acid (Hyalunan, HA), β-1,4-linked D-glucuronic acid and β-1,3 N-acetyl-D-glucosamine polysaccharide, is a nonsulfated glycosaminoglycan(GAG) conserved in the extracellular matrix (ECM). Due to its biocompatibility, biodegradable properties, HA is widely applied for tissue engineering. However, HA also has defects for tissue engineering such as mechanical properties, difficulty of handling. Thus, it is various modified by chemical reaction to produce HA derivative. HA plays an important role in tissue morphogenesis, proliferation and cell differentiation. Ascorbic acid (AA) has an effect on collagen synthesis and bone mineralization. Ascorbate levels also have a significant effect on osteoblast proliferation and alkaline phosphatase (ALP) expression. However AA is weak to heat and light, thus it is easily degradable. Consequently, we conjugated HA with AA in order to make it more stable and effective. In this study, we prepared HA-AA conjugate and evaluated activity of products in pre-osteoblast.

To produce more effective conjugation, we synthesised HA derivative, HA-N-hydroxysuccinimide, an activated ester of the glucuronic acid moiety. This HA-active ester intermediate is a precursor for drug-polymer conjugates. The degree of substitution was calculated by NMR analysis. The modified HA was dialysed and lyophilised. The yield of conjugation is calculated by Gel Permeation Chromatography (GPC). After the process, HA was conjugated with AA once again as previously mentioned. In this study, the resultant HA-AA conjugate was tested on MC3T3-E1, murine pre-osteoblast cells. We examined cellular viability (cytotoxicity), proliferation and gene expression. The expression of Type 1 collagen was examined by RT-PCR and western blot. Osteocalcin (OCN), osteopontin (OPN) and bone sialoprotein (BSP), bone proliferation and differentiation marker were detected by RT-PCR. Alkaline phosphatase assay was also performed. For confirmation on bone mineralization, alizarin red staining and von Kossa staining was performed.

In conclusion, the in vitro data demonstrate that HA-AA conjugate has an important role in bone formation, as it can increase proliferation and osteogenic differentiation of MC3T3-E1 cells. These observations further support the use of in vivo system for tissue engineering applications.

Constrained condylar knee (CCK) prosthesis offers an implant option for complex revision total knee arthroplasties in which stable varus-valgus constraint as well as rotational control is needed for severe bone defect and ligament insufficiency. The aim of this study was to evaluate the clinical and radiological outcome of CCK prosthesis in revision TKA.

Fify-one revision TKAs performed using CCK prosthesis between Jan. 1998 and Feb. 2006 were performed. The mean follow-up period was 5 years and 3 months (2 to 9 years) and the interval between initial and revision TKA was 8 years (4 months to 21 years). The mean age was 67 years. Range of motion (ROM), knee society (KS) score, hospital for special surgery (HSS) score, complication rate and failure rate was evaluated. The tibiofemoral angle and radiolucent line was also evaluated on plain radiograph.

The mean ROM improved from 81.9° to 102°. The mean KS score improved from 49.3° to 79.7°, and KS function score from 50.3 to 71.0 (P< .001). The mean HSS score improved from 50.7 to 78.7 (P< .001). Tibiofemoral angle improved from valgus 3.1° to valgus 5.6° (P< .001). Radiolucent line more than 2mm was observed around 4 femoral and 4 tibial components. Complications including 1 skin necrosis, 1 tibial tubercle nonunion, 2 infections, 3 periprosthetic fractures and 5 arthrofibrosis were observed. Overall rating was excellent or good in 88% at the last follow up.

Revision TKA using CCK prosthesis showed comparable results with other reports in average 5 years follow-up.

Even though spinal fusion has been used as one of the common surgical techniques for degenerative lumbar pathologies, high stiffness in the fusion segment could generate clinical complications in the adjacent spinal segment. To avoid these limitations of fusion, the artificial discs have recently used to preserve the motion of the treated segment in lumbar spine surgery. However, there have been lacks of biomechanical information of the artificial discs to explain current clinical controversies such as long-term results of implant wear and excessive facet contact forces. In this study, we investigated the biomechanical performance for three artificial discs in the lumbar spinal segments by finite element analysis.

A three-dimensional finite element model of five spinal motion segments, from L1 to S, in intact lumbar spine was reconstructed from CT images. Finite element models of three artificial discs, semi-constrained and metal on polyethylene core type (ProDisc^® II, Spine Solutions Inc., USA; Type I), semi-constrained and metal on metal type (MaverickTM, Medtronic Sofamor Danek Inc., USA; Type II), and un-constrained and metal on polyethylene core type (SB ChariteTM III, Dupuy Spine Inc., Switzerland; Type III) were developed. Each artificial disc was inserted at L4–L5 segment, respectively. Upper and lower plates of artificial discs were attached on the L4 and L5 vertebrae. Some parts of ligaments and intervertebral disc in L4–L5 motion segment were removed to insert artificial discs. Nonlinear contact conditions were applied on facet joints in lumbar spine model and artificial discs. Bottom of sacrum was fixed on the ground and 5Nm of flexion and extension moments were applied on the superior plate of L1 with 400N of compressive load along follower load direction.

In extension, all three artificial disc models showed higher rotation ratio at the surgical levels, but lower rotations at the adjacent levels than those in the intact model. There was no big difference of the intersegmental rotations among the artificial disc models. For the comparison of the peak von-Mises stresses on the polyethylene core in flexion, 52.3 MPa in type I implant was higher than 20.1 MPa in Type III implant while the peak von-Mises stresses were similar, 25.3 MPa and 26.5 MPa in Type I and III, respectively in extension. The facet contact forces at the surgical level for the artificial disc models showed 140 to 160 N in extension whereas the facet contact force in the intact model was 60 N.

From the results of this study, we could investigate the biomechanical characteristics of three different artificial disc models. The relative rotation at the surgical level would be increases at the early outcome after total disk replacement. The semi-constrained type artificial disc could generate higher wear risk of the implant than unconstrained type. Also all types of artificial disc model have higher risk of facet joint arthrosis, and especially in the semi-constrained and metal on metal type. The results of the present study suggested that more careful care must be taken to choose surgical technique of total disc replacement surgery.

Spinal fusion has been used as the gold standard to treat some spinal disorders such as degenerative disc or disc herniation of the cervical spine. However, some clinical complications have been reported caused by high stiffness of spinal fusion. Recently, total disc arthroplasty using motion preservation devices such as artificial discs (ADs) have been proposed as an alternative treatment technique. In current study, we analysed biomechanical influences including inter-segmental motion, facet joint forces, and ligament stresses of two different clinical available ADs and compared with those of intact cervical spine in various loading conditions using finite element analysis.

A three dimensional finite element model was developed for C2-C7 spinal motion segment based on CT images and previous anatomical literatures. The finite element models for two different types of ADs, semi-constraint (Prodisc-C^®, Synthes, U.S.A) and un-constraint (Mobi-C^®, LDR Spine, U.S.A), were developed. Each AD was inserted at C6–C7 segments. Superior and inferior plates of ADs were fixed on inferior plane of C6 and superior plane of C7 vertebrae, respectively. Based on the conventional surgical techniques, anterior longitudinal ligaments and some parts of intervertebral disc in C6–C7 motion segment were removed to insert ADs. Inferior plane of C7 vertebra was constrained in all directions and 1Nm of flexion, extension, lateral bending and torsion were applied on superior plane of C2 vertebra with 50N of compressive load along follower load direction.

Rotation angle in flexion of C5–C6 segment in cases of semi-constraint and un-constraint AD was 3.3° and 3.7°, respectively. Both values were greater than that in case of the intact cervical spine by 18% and 32%, respectively. Rotation angle in extension, lateral bending and torsion were greater than intact model by 45%, 26% and 43% for the case of semi-constraint AD and 55%, 35%, 100% for the case of un-constraint one, respectively. In extension, facet joint forces were about two times higher than intact model in cases of semi-constraint and un-constraint AD. Also in flexion, on average, ligament stresses in cases of semi-constraint and un-constraint AD were higher than intact model by 66% and 116%, respectively.

The results of this study showed that ADs were useful to generate inter-segmental motion at surgical level. And the un-constraint type of AD had higher mobility than semi-constraint one. However, high mobility of ADs would lead not only higher facet joint forces but also ligament stresses than intact cervical spine. Therefore, more careful care must be taken to choose surgical method of total disc arthroplasty.

Ultra-high molecular weight polyethylene (UHMWPE) has been used for the bearing liner or inlay components in total joint replacements such as total hip, knee, and artificial disk since 1960’s. UHMWPE components generate wear debris during articulation, which play a key role in osteolysis, subsequent aseptic loosening, and eventually revision surgery. Efforts to solve the wear problem in UHMWPE and to quantify the amount of wear have driven many studies. But in vivo radiographic penetration depth measurement is the result of both wear and viscoelastic creep. Previous study reported that over 70% of the dimensional changes in UHMWPE acetabular cups were due to creep. Creep deformation was quantified under the static and dynamic compressive pressures (2, 4, 8Mpa) that are clinically relevant for the hip joint loads in normal motions. However, according to the finite element stress analyses in UHMWPE components under the active motions in hip, knee, and artificial disk replacements, very high level of contact pressures locally ranged from under 10MPa up to over 60Mpa. In this study, we quantified the creep of UHMWPE under the several high levels of dynamic compressive pressures and compared the results from the previous results.

For creep tests, UHMWPE rectangular blocks (10mm long, 10mm wide, 8mm thick) were manufactured from molded unirradiated Chirulen^® 1020 sheet (MediTECH, Deutchland). MTS 858 hydraulic test machine was used for conducting the dynamic compressive creep tests under the four different sinusoidal (1Hz) maximum pressures of 10, 20, 40, and 60MPa and minimum pressures of 1, 2, 4, and 6MPa, respectively. All tests were conducted for a total duration of 4×103 minutes at ambient conditions. During the test the displacements of crosshead were stored and the changes in thickness of block specimen devided by the initial thickness were calculated to get the creep strain.

The mean dynamic compressive creep strain increased as the loading time increased and had a linear relationship (R2=0.96) with the logarithmic scale of time for all maximun pressures. Over 90% of total creep strain occurred within the first 103 minutes. The rates of creep strain (slopes of curve fitting in logarithmic scale of time) for each maximum pressure were listed in Table 1 with the rates of creep strain for low maximum pressures from the previous study [3]. The rates of creep strain increased linearly as the maximum pressure increased for both current study (R2=0.96) and previous study (R2=0.99). The slope of linearity for the current study with high levels of contact pressures was a little larger than that for the previous study with low levels of contact pressures. This difference in the slope of linearity between current and previous studies lies in the creep recovery during measurement of specimen thickness by micrometer in the previous study. Neglecting this difference, the results of current study can be extrapolated to anticipate the creep strain of UHMWPE under the dynamic compression for the low levels of contact pressures.

Purpose: To evaluate the normal glenoid size of the Koreans in their 7th and 8th decades with the Computed tomographic (CT) studies.

Materials and Methods: The CT images were obtained from normal scapulae of the patients (mean age : 68.8, range 62–76) with the humeral fracture cases. A Display workstation version 2.0.73.315 was used to measure the scans to determine the maximal superoinferior(SI) and anteroposterior(AP) diameter of the osseous glenoid vault.

Results: The average diameter of curvature of the glenoid were 31.2±2.3mm(range, 27 to 34mm) in the superior-inferior directions and 26.1±2.4mm(range, 22 to 31mm) in anterior-posterior.

Conclusion: This study showed the normal glenoid size of the Korean and it is smaller than the size which the international literature reported. It would be important factor for the treatment of fracture or arthroplasty implant designs.

The aim of this study was to evaluate passive kinematics of a mobile-bearing, ultracongruent (UC) total knee design compared with a mobile-bearing, posterior stabilised (PS) design intraoperatively using navigation system.

Thirty-four knees of 24 patients which had undergone total knee arthroplasty with UC prosthesis (E-motion^®, Aesculap, Tuttlingen, Germany) for primary osteoarthritis and fifteen knees of 14 patients with PS prosthesis (E-motion^®) were included in this study. Thirty-one female and seven male patients were included and the mean age was 70.4 years. Patients were followed up for 7.26 months (6 to 12 months). Intraoperative kinematics including valgus/varus rotation, internal/external rotation, and anterior/posterior translation was assessed from 10° to 120° of passive flexion before and after total knee replacement using a surgical navigation system (Orthopilot^®, Aesculap). The range of motion (ROM) was measured preoperatively and at the final follow up.

The tibiofemoral alignment in 10° flexion changed from varus 5.85° to valgus 0.38° in UC group and changed from varus 7.45° to valgus 1.08° in PS group (p> 0.05), the magnitude of varus rotation during flexion was 0.01° in UC group and 4.08° in PS group (p< 0.05). PS knee showed the tendency to slight varus alignment during flexion but UC knee showed the tendency toward valgus alignment fter midflexion. The mean internal rotation during flexion was 10.3° in UC group and 13.2° in PS group (p> 0.05). The translation of the femur was 4.99mm posteriorly in UC group and 3.24mm posteriorly in PS group at 120° flexion (p> 0.05). The maximum flexion angle at the final follow up was 123° in UC group and 118° in PS group (p> 0.05). Total knee arthroplasty with high flexion PS prosthesis showed good ROM and satisfactory early clinical results.

UC total knee design showed less varus rotation during flexion, more valgus pattern in higher flexion angle than PS design, similar internal rotation angle and pattern, and similar posterior translation at 120° flexion with PS design.

Spontaneous osteonecrosis of the knee (SPONK) usually involves a single condyle or plateau. The medial femoral condyle is most often involved and spontaneous osteonecrosis of medial tibial plateau is a rare condition, representing only 2 % of all necrosis reported in the knee. Therefore, SPONK with both involvement of medial femoral condyle(MFC) and medial tibial plateau(MTP) might be extremely rare. SPONK in each MFC or MTP respectively might be extended into corresponding side of the knee at their advanced final stage, howevere, in that situations, significant degenerative change would accompany and it might be difficult to differentiate final staged SPONK form severe osteoarthritis. To the best of our knowledge, SPONK affecting both medial femoral condyle and medial tibial plateau without significant secondary osteoarthritis changes is not reported, even though it was difficult to know which occurred first. We experienced 3 patients with histologically proven osteonecrosis of the medial tibial condyle and medial tibial plateau, and report their radiologic features. All 3 patients showed similar ridiograhic patterns. Medial portion of medial tibial plateau and lateral portion of medial femoral condyle showed longitudinal fracture like-subchondral collapse. Standing anteroposterior radiograph at 30 degree knee flexion showed well fitted features such as “locked” medial condyle. Varus angulation was present. Significant degenerative changes was not shown except for subchondral sclerosis. T1-weighted coronal and Fat suppressed T2-weighted MR images showed subchondral collapse with ill-defined diffuse bone marrow edema changes on both tibial and femoral condyles. At surgical findings, longitudinal track-like groove was shown in both medial femoral condyle and medial tibial plateau. Articular cartilage was denuded and showed glistening surface with bone defect of lateral side of medial femoral condyle and medial side of tibial articular surface. Histological analysis shows necrotic bone, surrounded by an area of fibrovascular granulation tissue on both femoral and tibial sides. Total knee arthoplasty was performed in all 3 patients. As a result of very low prevalence of both involvement of MFC and MTP and limited number of our cases, we could not conclude that radiologic features in our cases are typical radiologic pattern of both involvement. However, based on our cases, we believe that this characteristic radiologic features may considered as one of the possible various radiologic findings of simultaneous involvement in MFC and MTP and allow diagnosis for SPONK with both involvement in MFC and MTP to be facilitated.

Arthrodesis is used most commonly as a salvage procedure for failed total knee arthroplasty (TKA). For successful arthrodesis, a stable fusion technique and acceptable limb mechanical alignment are needed. Although the use of intramedullary alignment rods might be helpful in terms of achieving an acceptable limb mechanical axis, fat embolism and intramedullary dissemination of an infection or reactivation of latent infection might occur in failed TKA cases. However, computer-assisted surgery allows precise cuts to be made without breaching medullary cavities. Here, the authors describe a case of knee arthrodesis performed by computer navigation and the Ilizarov method in a patient with a past history of infection. A 45-year-old man visited our hospital with failed total knee arthroplasy. Fortunately, even though infection was treated by debridement with component retention, mild heating was present over the knee, but ESR(erythrocyte sedimentation rate) and CRP(C-reactive protein) were within normal ranges. X-ray showed subsidence of the femoral component and a radiolucent line around the femoral component. Arthrodesis was planned for this patient due to disabling pain, a long-lasting severe functional deficit, failure of the primary TKA for ankylosed knee, and the patient’s poor economic status and his strong desire for arthrodesis. The computer navigation surgery system and the Ilizarov method were used for two reasons. The first reason was that the patient had a past history of infection. At pre-operative evaluation, even though ESR and CRP levels were within normal range, we could not completely rule out the possibility of latent infection due to suspicious findings such as long lasting disabling knee pain, mild heating over the knee, severe osteolytic radiographic changes around the femoral component. In that situation, inserting an IM rod to achieve acceptable mechanical alignment might have reactivated and disseminated a possible latent infection to the femoral or tibial medullary canals. The second reason was that we wanted to reduce the possibility of fat embolism by using computer navigation without instrumentation within the medullary canal. A CT-free, wireless computer navigation system was applied, with trackers fixed to the femur and tibia and no requirement for the use of an IM rod with component retention. Navigated femoral and tibial bone resections were then performed using Stryker software. The femoral resection was conducted at 0° of flexion to the sagittal axis, and the tibial resection at 7 ° of flexion to the sagittal axis. Arthrodesis was held in proper axial and rotational alignment with bone surfaces compressed together. Finally, knee arthrodesis was completed using the Ilizarov method. Based on our experience of the described case, we believe that arthrodesis for failed TKR, especially failure secondary to intraarticular infection, can be considered as another indication for computer navigation.

There was used cement in first generation total ankle arthroplasty, but first generation of ankle arthroplasty was abandoned because of aseptic loosening of component. For the treatment of aseptic loosening of ankle arthroplasty, there had been many methods. One of methods of revisional ankle arthroplasty is the ankle arthodesis. The authors report a case of revisional ankle arthroplasty using allograft with hybrid external fixation.

45 year old male had surgery of cemented total ankle arthroplasty on his right ankle 20 years ago. He went to our clinics because of motionless and pain of his right ankle. He got the mild pain on his right ankle after 5 years surgery. His pain was managed by oral NSAIDS for 15 years. The pain was aggravated recently. There were osteophytes on posterior aspect of ankle joint and radiolucency around the implant, subtalar arthrosis at the radiograph. There was also sclerosis around the ankle joint.

The authors decided revisional surgery. At the operative findings, we can see the loosening of talar and tibial component and large posterior osteophyte bridging between remained talus and tibial bone. There were no infection signs. After remove the implant, there was big space remained. For the regaining the limb length, we used femoral head allograft. The graft was fixed with 6.5 mm cannulated screws and addition fixed with ilizarov external fixation. Also additional auto bone graft from the osteophytes was applied. Compression over the ilizarov external fixation was done at the end of the operation. Weight bearing was allowed immediate after surgery. Ilizarov ring was removed 6 weeks after surgery. At the 3 months after surgery, bony union was obtained on radiographs.

AOFAS score was improved from 30 to 70 6 mo after surgery. There was no pain on his right ankle. Patient satisfied with arthrodesis with allograft at final follow-up.

Clinical experience has shown the needs for high flexion. The aim of this study was to evaluate the clinical and radiological results of a fixed bearing high flexion posterior stabilized (PS) total knee arthroplasty (TKA).

Between July 2001 and December 2005, 422 TKAs in 288 patients were performed with high flexion PS prosthesis and 378 knees of 258 patients had been followed up for 2 to 6.5 years (mean: 3 years 11 months). We evaluated range of motion (ROM), Knee rating system of the Hospital for Special Surgery (HSS) and Knee Society (KS) score, and radiological results.

The mean flexion improved from 110.1 degrees to 126.7 degrees at the latest follow-up. 333 knees (88 %) showed more than 120 degrees of flexion, 105 knees (28 %) more than 140 degrees of flexion. The mean KS clinical score improved from 39 to 93 points (p< 0.01) and KS function score, from 40 to 85.4 points (p< 0.01). The mean HSS score improved from 41.2 to 86.3 points (p< 0.01). In 28 knees, radiolucent line of 1–2 mm in width was observed at zone 1 without symptoms. Aseptic loosening in 4 knees, Mid-flexion instability in 2 knees, superficial infection in 3 knees and deep infection in 3 knees were observed.

Total knee arthroplasty with high flexion PS prosthesis showed good ROM and satisfactory early clinical results. Complication rate was similar to those of other series. Close observation and serial radiological evaluation are needed for long term results.

Total Hip Arthroplasty (THA) has been more frequently performed for relatively young patients with osteonecrosis of the femoral head in Korea. Moreover, squatting and sitting with crossed legs are more common in Asian cultures than in Western cultures. Wear debris generated by conventional metal-on-PE articulations has been giving rise to extensive osteolysis. Due to these characteristics, higher incidence of pelvic osteolysis was observed after THA in Korea. As a result, interest in alternative bearings such as ceramic-on-ceramic bearing has been increased. Furthermore, the patients who require revision THA are still young in Korea. With this point of view, an application of ceramic-on-ceramic bearing throughout revision THA seems to be reasonable. The clinical and radiographical outcomes after revision THA with use of third generation ceramic-on-ceramic bearing in Korean patients were evaluated.

Materials and Methods: We have analyzed 42 hips (37 patients; 17 men and 20 women), in whom revision THAs were performed using cementless cups with ceramic-on-ceramic bearing (Biolox Forte; CeramTec, Plochingen, Germany). They underwent THA at a single institution between February 2000 and December 2004, and were consecutively enrolled in this study. Their mean age was 48.8 years (32 – 59 years), and their mean weight was 61.5 ± 5.8 kg (50 – 72 kg) and BMI was 23.8. The mean interval from primary to revision THA was 9.5 ± 3.2 years (3.3 – 16.1 years). The preoperative diagnoses for primary THA were osteonecrosis of the femoral head in 31 hips, neglected femoral neck fracture in 3, rheumatoid arthritis in 2, degenerative osteoarthritis in 2, pyogenic arthritis in 2, tuberculosis arthritis in 1, and fused hip in 1. Dissociation of PE liner was observed in 21 hips (50%). For acetabular cup revision, Trilogy ceramic acetabular cups (Zimmer, Warsaw, IN) were used in 22 hips, EP-FIT plus cups (Plus Orthopedics, Rotkreuz, Switzerland) in 14 hips, and Duraloc Option Ceramic cups (DePuy, Warsaw, IN) in 6 hips. Stems were revised in all hips. The follow-up protocol included radiographic and clinical evaluations, and the mean duration of follow-up monitoring after revision THA was 5.4 ± 1.7 years (3.2 – 8.0 years). At final follow-up examination, clinical outcomes including Harris Hip Score and complications were assessed. All changes in inclination were documented radiographically. The presence of radiolucent lines, vertical or horizontal migration of acetabular cup (> 2 mm), and osteolysis were also evaluated.

Results: At final follow-up evaluation after revision, the average Harris Hip Score was 91.3. There were no revised hips during follow-up period. In 6 hips (14.3%), minor complications were observed: 3 heterotopic ossifications, 2 dislocations, 1 infection. No revision was necessary for the treatment of these complications. There were no hips with radiolucent lines, vertical or horizontal acetabular cup migration or osteolysis during the follow-up period. In 21 hips with bone graft, incorporation of bone graft was observed radiographically at final follow-up examination.

Conclusions: Our data showed that clinical and radiographical outcomes after revision THA using third generation ceramic-on-ceramic bearing were favorable. Revision THA with the use of ceramic-on-ceramic bearing surfaces can be preferentially considered especially in young patients. Further studies with long-term follow-up data are warranted.

The treatment of rotator cuff arthropathy due to irreparable massive rotator cuff tear is still challenging. We performed reverse total shoulder arthroplasties for 2 cases of cuff tear arthropathy. The short term follow-up after the surgery reveal excellent results by ASES and UCLA score. However, these results still require long term follow-up and the study about implant design for the shoulder anatomy of the Koreans.