Aims. Patients with recurrent anterior dislocation of the shoulder commonly have an anterior osseous defect of the glenoid. Once the defect reaches a critical size, stability may be restored by bone grafting. The critical size of this defect under non-physiological loading conditions has previously been identified as 20% of the length of the glenoid. As the stability of the shoulder is load-dependent, with higher
Crescent fracture dislocations are a well-recognised subset of pelvic ring injuries which result from a lateral compression force. They are characterised by disruption of the sacroiliac
Objectives. The purpose of this study was to develop an accurate, reliable and easily applicable method for determining the anatomical location of the
Aims. The aim of this consensus was to develop a definition of post-operative
fibrosis of the knee. Patients and Methods. An international panel of experts took part in a formal consensus
process composed of a discussion phase and three Delphi rounds. Results. Post-operative fibrosis of the knee was defined as a limited
range of movement (ROM) in flexion and/or extension, that is not
attributable to an osseous or prosthetic block to movement from
malaligned, malpositioned or incorrectly sized components, metal
hardware, ligament reconstruction, infection (septic arthritis),
pain, chronic regional pain syndrome (CRPS) or other specific causes,
but due to soft-tissue fibrosis that was not present pre-operatively.
Limitation of movement was graded as mild, moderate or severe according
to the range of flexion (90° to 100°, 70° to 89°, <
70°) or extension
deficit (5° to 10°, 11° to 20°, >
20°). Recommended investigations
to support the diagnosis and a strategy for its management were
also agreed. Conclusion. The development of standardised, accepted criteria for the diagnosis,
classification and grading of the severity of post-operative fibrosis
of the knee will facilitate the identification of patients for inclusion
in clinical trials, the development of clinical guidelines, and
eventually help to inform the management of this difficult condition. Cite this article: Bone
Aims. Our aim in this study was to describe the long-term survival
of the native hip
Aims. Advocates of debridement, antibiotics and implant retention (DAIR)
in hip periprosthetic
Aims. The purpose of this current multicentre study is to analyse the
presence of alpha-defensin proteins in synovial fluid using the
Synovasure lateral flow device and to determine its diagnostic reliability
and accuracy compared with the prosthetic joint infection (PJI)
criteria produced by the Musculoskeletal Infection Society (MSIS). Patients and Methods. A cohort of 121 patients comprising 85 total knee arthroplasties
and 36 total hip arthroplasties was prospectively evaluated between
May 2015 and June 2016 in three different orthopaedic centres. The
tests were performed on patients with a chronically painful prosthesis
undergoing a joint aspiration in a diagnostic pathway or during revision
surgery. Results. Based on the MSIS criteria, 34 patients (28%) would have had
a PJI, and 87 patients had no PJI. Testing with the lateral flow
device had a sensitivity of 97.1% (95% confidence intervals (CI)
84.5 to 99.9) and a specificity of 96.6% (95% CI 90.3 to 99.2).
The positive predictive value was 91.7% (95% CI 77.7% to 98.3),
and the negative predictive value was 98.8% (95% CI 93.6 to 99.9).
Receiver operator characteristics analysis demonstrated an area
under the curve for the Synovasure test of 0.97 (95% CI 0.93 to
1.00). Conclusion. Our findings suggest that the Synovasure test has an excellent
diagnostic performance to confirm or reject the diagnosis of a PJI.
The results are promising for the care of the painful or problematic
knee and hip joint arthroplasty and the test should be considered
as part of the diagnostic toolbox for PJIs. Cite this article: Bone
Objectives. Malrotation of the femoral component can result in post-operative complications in total knee arthroplasty (TKA), including patellar maltracking. Therefore, we used computational simulation to investigate the influence of femoral malrotation on contact stresses on the polyethylene (PE) insert and on the patellar button as well as on the forces on the collateral ligaments. Materials and Methods. Validated finite element (FE) models, for internal and external malrotations from 0° to 10° with regard to the neutral position, were developed to evaluate the effect of malrotation on the femoral component in TKA. Femoral malrotation in TKA on the knee
Objectives. The objective of this study was to develop a test for the rapid (within 25 minutes) intraoperative detection of bacteria from synovial fluid to diagnose periprosthetic
Louis Pasteur once said that: “Fortune favours
the prepared mind.” As one of the great scientists who contributed
to the fight against infection, he emphasised the importance of
being prepared at all times to recognise infection and deal with
it. Despite the many scientific discoveries and technological advances,
such as the advent of antibiotics and the use of sterile techniques,
infection continues to be a problem that haunts orthopaedic surgeons
and inflicts suffering on patients. . The medical community has implemented many practices with the
intention of preventing infection and treating it effectively when
it occurs. Although high-level evidence may support some of these
practices, many are based on little to no scientific foundation.
Thus, around the world, there is great variation in practices for
the prevention and management of periprosthetic
The role of computer-assisted surgery in maintaining the level of the
Bilateral coracoclavicular
Objectives. The bony shoulder stability ratio (BSSR) allows for quantification of the bony stabilisers in vivo. We aimed to biomechanically validate the BSSR, determine whether
We identified 148 patients who had undergone a revision total knee replacement using a single implant system between 1990 and 2000. Of these 18 patients had died, six had developed a peri-prosthetic fracture and ten had incomplete records or radiographs. This left 114 with prospectively-collected radiographs and Bristol knee scores available for study. The height of the
The aim of this study was to examine the loading
of the other
Aim. Nail patella syndrome (NPS) is a skeletal dysplasia with patellofemoral
dysfunction as a key symptom. We present the first in-depth radiological
evaluation of the knee in a large series of NPS patients and describe
the typical malformations. Patients and Methods. Conventional radiological examination of 95 skeletally mature
patients with NPS was performed. Patellar morphology was classified
according to the Wiberg classification as modified by Baumgartl
and Ficat criteria, and trochlear shape was classified according
to the Dejour classification. Results. Patellar aplasia was present in 4/90 (4%), and patellar hypoplasia
in 77/90 (86%) of patients. The prevailing patellar shapes were
type III, type IV and Hunter’s cap. No patellar shape genotype-phenotype
association could be found. The malformations of the distal femur
comprised shortening of the lateral femoral condyle in 46 out of
84 patients (55%), with a prominent anterior surface of the lateral
femoral condyle in 47 out of 84 patients (56%) and a flat anterior
surface of the medial femoral condyle in 78 out of 85 patients (92%).
The trochlea was type A1 according to the Dejour classification
in 79 out of 85 patients (93%). . Conclusion. An easily recognisable characteristic quartet of malformations
consisting of patellar aplasiaor hypoplasia and the malformations
of the distal femur was found in 22 out of 81 patients (27%), with
the majority displaying at least three malformations. Take home message: The distinct malformations of the knee in
nail patella syndrome are easily recognisable on conventional radiographs
and lead to the correct interpretation of the aberrant morphology
which is essential in the treatment of these patellofemoral disorders. Cite this article: Bone
To confirm whether developmental dysplasia of
the hip has a risk of hip impingement, we analysed maximum ranges
of movement to the point of bony impingement, and impingement location
using three-dimensional (3D) surface models of the pelvis and femur
in combination with 3D morphology of the hip
Aims. Tibiofemoral alignment is important to determine the rate of
progression of osteoarthritis and implant survival after total knee
arthroplasty (TKA). Normally, surgeons aim for neutral tibiofemoral
alignment following TKA, but this has been questioned in recent
years. The aim of this study was to evaluate whether varus or valgus
alignment indeed leads to increased medial or lateral tibiofemoral
forces during static and dynamic weight-bearing activities. Patients and Methods. Tibiofemoral contact forces and moments were measured in nine
patients with instrumented knee implants. Medial force ratios were
analysed during nine daily activities, including activities with
single-limb support (e.g. walking) and double-limb support (e.g.
knee bend). Hip-knee-ankle angles in the frontal plane were analysed
using full-leg coronal radiographs. . Results. The medial force ratio strongly correlated with the tibiofemoral
alignment in the static condition of one-legged stance (R² = 0.88)
and dynamic single-limb loading (R² = 0.59) with varus malalignment
leading to increased medial force ratios of up to 88%. In contrast,
the correlation between leg alignment and magnitude of medial compartment force
was much less pronounced. A lateral shift of force occurred during
activities with double-limb support and higher knee flexion angles. . Conclusion. The medial force ratio depends on both the tibiofemoral alignment
and the nature of the activity involved. It cannot be generalised
to a single value. Higher medial ratios during single-limb loading
are associated with varus malalignment in TKA. The current trend
towards a ‘constitutional varus’ after joint replacement, in terms
of overall tibiofemoral alignment, should be considered carefully
with respect to the increased medial force ratio. Cite this article: Bone
1. This is a simple clinical study of the end-results of arthrodesis of the hip
Aims. To investigate whether elective joint arthroplasty performed
at the weekend is associated with a different 30-day mortality versus that
performed between Monday and Friday. Patients and Methods. We examined the 30-day cumulative mortality rate (Kaplan-Meier)
for all elective hip and knee arthroplasties performed in England
and Wales between 1st April 2003 and 31st December 2014, comprising
118 096 episodes undertaken at the weekend and 1 233 882 episodes
performed on a weekday. We used Cox proportional-hazards regression
models to assess for time-dependent variation and adjusted for identified
risk factors for mortality. Results. The cumulative 30-day mortality for hip arthroplasty was 0.15%
(95% confidence interval (CI) 0.12 to 0.19) for patients operated
on at the weekend versus 0.20% (95% CI 0.19 to 0.21) for patients
undergoing surgery during the normal working week. For knee arthroplasty,
the cumulative 30-day mortality was 0.14% (95% CI 0.11 to 0.17)
for weekend-operated patients versus 0.18% (95% CI 0.17 to 0.19)
for weekday-operated patients. These differences were independent
of any differences in patient age, gender, American Society of Anaesthesiologists
grade, surgeon seniority, surgical and anaesthetic practices, and
thromboprophylaxis choice in weekend versus weekday-operated patients. Conclusion. The 30-day mortality rate after elective joint arthroplasty is
low. Surgery performed at the weekend is associated with lower post-operative
mortality versus operations performed on a weekday. Cite this article: Bone