Introduction and Aims: Although cortical hypertrophy (CH) in total hip arthroplasty (THA) has been associated with thigh pain and loose femoral stems, its presence has been variable in the literature, and it is an implant-specific phenomenon. The relationship of bony change to clinical outcome has not previously been examined in ceramic THA.

Method: Hardened-bearing surfaces such as ceramics have the potential for altered patterns of force transmission into the femoral stem-bone interface, and as such could lead to altered bone remodelling. We investigate here the incidence and magnitude of CH at the Gruen zones, about the femoral stem of THA utilising ceramic-on-ceramic bearing surfaces without (n=36) or with (n=4) cement, and metal-polyethylene bearing surfaces without (n=40) or with (n=40) cement. Using multifactorial analysis, we examined the relationship of implant alignment, Harris and Oxford hip scores, and bone remodelling parameters.

Results: In this study of 120 patients, the hip scores and x-rays are examined in the first year after total hip arthroplasty (THA), in order to evaluate bone remodelling in relation to clinical outcomes. Ceramics had the highest incidence (25%) and mean size (1.5 mm) of CH, followed by metal-polyethylene (17%, < 1 mm). No cemented implants exhibited CH. There was no significant relationship of bone remodelling to one-year hip scores, although there were significantly reduced pain scores in cases that exhibited endosteal remodelling at one year. CH in ceramic hips appears to be a mechanical phenomenon that is not associated with pain, varus drift, subsidence, or altered clinical outcome. Cement may buffer the stresses seen by the femur, and hence the stimulus for CH appears to be simply mechanical, and is increased with hardened-bearing surfaces.

Conclusion: CH was more common in ceramic THA than metal-polyethylene, but was not associated with increased thigh pain or altered function. CH did not occur when cement was used, and as such we argue for a mechanical origin of the phenomenon, via altered load transmission into the femur through hardened-bearing surfaces.

Background

Thigh pain following a well-fixed total hip arthroplasty (THA) remains problematic and a source of patient dissatisfaction. The purpose of this study is to evaluate if the development of distal femoral cortical hypertrophy (DFCH) is associated with chronic postoperative thigh pain after THA with a short stem implant.

Purpose

The purpose of this study was to evaluate and compare the clinical, radiological outcomes of the group of patients with distal femoral cortical hypertrophy (DFCH) and without DFCH after hip arthroplasty using a cementless double tapered femoral stem and to analyze a correlation between patients factors and DFCH.

Aims

Distraction osteogenesis with intramedullary lengthening devices has undergone rapid development in the past decade with implant enhancement. In this first single-centre matched-pair analysis we focus on the comparison of treatment with the PRECICE and STRYDE intramedullary lengthening devices and aim to clarify any clinical and radiological differences.

Aims

Although the short stem concept in hip arthroplasty procedure shows acceptable clinical performance, we sometimes get unexplainable radiological findings. The aim of this retrospective study was to evaluate changes of radiological findings up to three years postoperatively, and to assess any potential contributing factors on such radiological change in a Japanese population.

Objective. This study shows the radiographic results of total hip arthroplasty (THA) using the Revelation hip system. ®. for hip joint disease. Methods. We performed THA for hip disease using the Revelation Hip System. ®. From July 2007 to May 2009, 30cases (35 hips) were available for this study. Radiographic evaluation was performed at the last follow-up. Evaluation items included the presence or absence of subsidence, spot welds, demarcation line, cortical hypertrophy and stress shielding. The stem was designed to be implanted without cement and to be combined to the femur bone at the proximal portion to avoid stress shielding. Zone of Gruen zone 1 was divided into 1A or 1B, above and below the outermost tip of the lateral flare of the stem. Results. In total, 35 hips had spot welds at zones 1B and 7, and many hips had demarcation lines in zone 4 or 5, but not in zones 1B or 7. Cortical hypertrophy was detected in 6 cases in zone 3, the lateral edge of the stem. Stress shielding was first degree or second degree in 29 hips; however, no cases were identified with more than third-degree stress shielding. Discussion. At the proximal portion of the stem, spot welds were detected but demarcation lines were not, suggesting that bone ingrowth to the stem and combination of the stem and femur may have been completed in this area. Loading at the medial proximal end may not have occurred with a collarless cementless stem. First-degree stress shielding was thus considered a natural phenomenon that should not be seen as usual stress shielding. Cortical hypertrophy was detected in 17.1% of hips. Although no complaints such as thigh pain were identified, Revelation microMax. ®. , in which the unnecessary distal portion of the stem was shortened, was designed to address this problem

Purpose. One of the drawbacks of cemented total hip arthroplasty (THA) is aseptic loosening after long period, major reason for which is bioinertness of PMMA bone cement. To improve longevity of THA, interface bioactive bone cement (IBBC) technique which is characterized with smearing hydroxyapatite (HA) granules just before cementation has been used in our institute. Objective. Smooth-surfaced triple-tapered Titanium-alloy stem (T) and Exeter stem (E) have been used consecutively in the different period. Objective of the present study was thoroughly comparing two stems clinically and radiologically. Method. The present study includes 38 hips of T and 40 hips of E. Mean postoperative follow up period was 7.7 years for T and 6.2 years for E. Radiolucent line (RL) was determined as clear line with sclerotic demarcation and cancellisation as without it. Results. Pre- and postoperative evaluation using Merle d'Aubigné score were 8.1 (2.2, 2.2, 3.7) and 16.0 (6.0, 5.2, 4.8) points for T and, 8.1 (2.2, 2.2, 3.7) and 16.4 (6.0, 5.6, 4.8) for E, respectively. Postoperative cementing grade using Barrack's classification was classified as A for 30 hips in T and 39 hips in E, and as B for 8 hips in T and 9 hips in E. Neither osteolysis nor loosening was observed in both groups. No RL at bone-cement interface, focal osteolysisã, cement fracture was observed. Cortical hypertrophy (CH) was observed in 7 hips of T and 5 hips of E (NS). Cortical hypertrophy (CH) localized beyond stem tip was observed in all hips of T (Figure 1) and in 1 hips of E (Figure 2) (p < 0.05). Cancellisation was observed in 17 hips of T and 16 hips in E (NS). Conclusion. The present study revealed excellent medium-term result was obtained using both stems fixed with IBBC technique. CH was observed more distally in T compared with E

Purpose: In uncemented total hip arthroplasty, stem design is one of the important factors influencing bone remodeling. The purpose of this study was to determine the differences in bone remodeling between metaphyseal and diaphyseal fit stems. Methods: Twenty-three patients undergoing total hip arthroplasty (28 hips) with metaphyseal fit stems were matched to 27 patients (32 hips) undergoing uncemented total hip arthroplasty with diaphyseal fit stems. Preoperative radiographs were assessed for canal fill, canal shape, and bone quality. Postoperative radiographs were assessed for frequency and time of appearance of peri-prosthetic bone remodeling including spot welds, cortical hypertrophy and pedestal formation. All patients were examined by a modified Harris Hip Score. Results: The proximal canal shape and bone quality were similar in both groups. There was no difference in the frequency of spot welds at 1 year and 2 years. Spot welds were mainly located in Gruen zone 1. Cortical hypertrophy was greater (p < 0.05) at 6 months, 1 year and 2 years with the metaphyseal fit stem. Cortical hypertrophy was found only in Gruen zones 3 and 5. Halo pedestal formation was greater (p < 0.05) at 6 months with the metaphyseal fit stem but not at 1 year and 2 years. Calcar rounding was observed in 25 hips (90.0%) with metaphyseal fit stems and twenty hips (62.5%) with diaphyseal fit stems. At the last follow-up, average HHS was similar (90.6 +/− 1.5 / 91.7 +/− 1.7; metaphyseal / diaphyseal fit stems). No patient developed aseptic loosening. Conclusions: This is the first study to determine differences in bone remodeling between a metaphyseal and a diaphyseal fixed stem in uncemented THA. After one year, the only significant difference between these two groups was cortical hypertrophy, which was greater in patients undergoing metaphyseal fit stem insertion. Both stem designs demonstrated bone remodeling with no differences in spot welds or pedestal formation. At two years, there was no functional difference between these two patient groups. To further elucidate the relation between radiographic and clinical results, longer term follow-up is required

INTRODUCTION. Recently, short shaped stem becomes popular in total hip arthroplasty (THA). Advantages of the short stem are preserving femoral bone stock, thought to be less thigh pain, suitable for minimally invasive THA. However, bony reaction around the short stem has not been well known. The purpose of this study was to compare the two years difference of radiographic change around the standard tapered round stem with the shorter tapered round stem. MATERIALS AND METHODS. Evaluation was performed in 96 patients (100 joints) who underwent primary THA. Standard tapered round stem (Bicontact D stem) was used in 44 patients from January 2011 to May 2013. Shorter stem (Bicontact E stem) was used in 56 patients from May 2015 to March 2016. The proximal shapes of these two stems are almost the same curvature. The mean age at surgery was 64 years. The mean BMI at surgery was 24.0 kg/m. 2. Eighty-six patients had osteoarthrosis and 10 patients had osteonecrosis. Evaluation was performed 2 years after surgery with standard AP radiographs. The OrthoPilot imageless navigation system was used during surgery. Evaluation of the stem fixation, stress shielding, and cortical hypertrophy were carried out. RESULTS. There were no differences of patient characteristics between the standard D stem group and the shorter E stem group. All 100 stems showed bony stable fixation two years after surgery. No subsidence was observed in both groups. No clear zone was observed around the stems in both groups. Cortical hypertrophy was observed 19 patients (43.2%) with the standard D stem group and 13 patients (23.2%) with the shorter E stem group. The standard D stem group showed higher incidence of cortical hypertrophy. Stress shielding was observed 35 patients (80%) with the standard D stem group and 42 patients (75%) with the shorter E stem group. The number of grade 1 and grade 2 stress shielding cases were 13 and 22 with the standard D stem group and 10 and 32 with the shorter E stem group, respectively. There were no grade 3 stress shielding case in both groups. Regarding the incidence of stress shielding, there was no difference between the two groups. DISCUSSION. This study demonstrated that the shorter stem showed less incidence of cortical hypertrophy compared to the standard stem. With radiographic evaluation, both standard and shorter stem showed good fixation. The meaning of cortical hypertrophy, whether it is a good reaction for the femur or not, has not been clarified yet. Less bony reaction around the shorter stem may suggest the potential for better clinical performance of the shorter stem compare to the standard stem

Introduction. We have investigated the long-term (minimum follow-up period; 10 years) clinical results of the total hip arthroplasty (THA) using K-MAX HS-3 tapered stem. Materials and Methods. In K-MAX HS-3 THA (Kyocera Medical, Kyoto, Japan), cemented titanium alloy stem and all polyethylene cemented socket are used. This stem has the double tapered symmetrical stem design, allowing the rotational stability and uniform stress distribution. The features of this stem are; 1. Vanadium-free high-strength titanium alloy (Ti-15Mo-5Zr-3Al), 2. Double-tapered design, 3. Smooth surface (Ra 0.4µm), 4. Broad proximal profile, 5. Small collar. Previous type stem, which was made of the same smooth-surface titanium alloy, has the design with cylindrical stem tip, allowing the maximum filling of the femoral canal. Osteolysis at the distal end of the stem had been reported in a few cases in previous type with cylindrical stem tip, probably due to the local stress concentration. Therefore the tapered stem was designed, expecting better clinical results. 157 THAs using HS-3 taper type stem were performed at Kitano Hospital between March 2004 and March 2008. And 101 THAs, followed for more than 10 years, were investigated (follow-up rate; 64.3%). The average age of the patients followed at the operation was 61.7 years and the average follow-up period was 10.9 years. The all-polyethylene socket was fixed by bone cement, and the femoral head material was CoCr (22mm; 5 hips, 26 mm; 96 hips). Results. Two hips were revised, one was due to late infection, and the other due to breakage of the implant in trauma. Japanese orthopaedic association (JOA) score improved from 40 to 86 points. Postoperative complication was three periprosthetic fractures (one femoral shaft fracture and two greater trochanteric fractures) and femoral shaft fracture case was operated. Dislocation was not observed. Socket loosening (Hodgkinson, Type 3, 4) and stem loosening (Harris, definite and probable) were not observed radiographically. Cortical hypertrophy was observed in 7.9%. The survival rate of HS-3 tapered stem was 98% for revision due to any reason and 100% for revision due to aseptic loosening. Discussion. The long-term clinical results of K-MAX HS-3 tapered stem were excellent. The osteolysis at the stem tip was not observed in this type, which was observed in a few cases in previous type. From the X-ray finding, it was suggested that this taperd stem had more uniform stress distribution to the femoral bone than previous type. Moreover, the problems associated with titanium alloy usage were not observed. From the present investigation, good farther long-term results of the tapered titanium stem were expected

Introduction. Long term results of Total Hip Arthroplasty (THA) are affected by wear of articulation. Ceramic on ceramic articulation have been used especially for young patients because of its low wear and bio-inert property. However, because of its hardness, it is concerned that ceramic fracture, chipping, or squeaking might happen with ceramic on ceramic articulation. Objective. The purpose of this study was to investigate over 10-years clinical and radiographic results of ceramic bearing cementless THA. Methods. Evaluation was performed in 60 patients (68 joints) who underwent primary cementless THA from May 2003 to April 2007. Mean age at surgery was 59 years. Mean follow up period was 11.2 years. Forty-nine patients were female. Mean BMI at surgery was 24.0 kg/m. 2. Fifty-one patients had osteoarthrosis, 6 patients had osteonecrosis, 2 patients had rheumatoid arthraitis, and 1 patient had PSS. A 28mm-size femoral head was used in all patients. Clinical evaluation was performed with Japanese Orthopaedic Association Hip Score (JOA score). Radiographic results were evaluated with standard bilateral hip radiograph in supine position. Results. Mean clinical score at surgery was 45 (pain: 13/40, ROM: 12/20, gait: 9/20, ADL: 12/20). Mean clinical score at final follow up was 92 (pain: 39/40, ROM: 17/20, gait: 17/20, ADL: 18/20). Pain score was dramatically improved from 13 to 39 (maximum pain score: 40). One stem was revised because of recurrent dislocation. Two other patients experienced one time dislocation during follow up. One stem showed 5mm of subsidence. ALL cups and stems showed bone ingrowth at final follow up. Cortical hypertrophy was seen in 17 joints. However, there was no patient complained thigh pain. Stress shielding was seen in 55 joints (81%). First, second and third degree of stress shielding were seen in 12, 40, and 3 joints, respectively. Most of the female patients who had surgery at the age over 60 years showed second and third degree of stress shielding. There was no measurable wear. No osteolysis was found around the implants. There were no ceramic fracture, chipping, and squeaking. Conclusion. This study demonstrated excellent clinical and radiographic results of ceramic bearing cementless THA. Excellent long term results will be expected with this system

Introduction. We have compared the middle-term (average follow-up period; 10 years) clinical results of the K-MAX HS-3 tapered stem with those of the previous type having cylindrical tip. Materials and Methods. In K-MAX HS-3 THA (Kyocera Medical, Kyoto, Japan), cemented titanium alloy stem and all polyethylene cemented socket are used. This stem has the double tapered symmetrical stem design, allowing the rotational stability and uniform stress distribution (Type T) (Fig. 1). The features of this stem are; 1. Vanadium-free high-strength titanium alloy (Ti-15Mo-5Zr-3Al), 2. Double-tapered design, 3. Smooth surface (Ra 0.4μm), 4. Broad proximal profile, 5. Small collar. In contrast, previous type stem, which was made of the same smooth-surface titanium alloy, has the design with cylindrical stem tip, allowing the maximum filling of the femoral canal (Type C) (Fig. 2). Osteolysis at the distal end of the stem had been reported in a few cases in Type C, probably due to the local stress concentration. Therefore the tapered stem was designed, expecting better clinical results. All surgery was performed at Kitano Hospital between September 2003 and June 2006. 72 THA were performed (Type T; 52 hips, Type C; 20 hips). The average age of the patients at the operation was 61 and 69 years and the average follow-up period was 10.1 and 10.4 years for the Type T and C, respectively. The all-polyethylene socket was fixed by bone cement, and the femoral head material was alumina or CoCr (22 or 26 mm). Results. One hip was revised in Type C. Japanese orthopaedic association (JOA) score improved from 39/37 to 84/77 points (Type T/C). Postoperative complication was dislocation in one case (Type C; 1). Socket loosening was not observed radiographically. Stem loosening was observed in one hip in Type C, demonstrating osteolysis at the distal end of the stem. In this case, revision THA was performed 3.5 years postoperatively. Bone resorption was more frequently observed in Type C than Type T. Cortical hypertrophy was observed in 7.7% in Type T and 25% in Type C. Discussion. The middle-term clinical results of K-MAX HS-3 taper stem (Type T) was excellent. The osteolysis at the stem tip was not observed in this type, which was observed in a few cases in previous Type C. From the X-ray finding, it was suggested that Type T had more uniform stress distribution to the femoral bone than Type C. Moreover, the problems associated with titanium alloy usage were not observed. From the present investigation, good long-term results of the tapered titanium stem (Type T) was expected. For any figures or tables, please contact authors directly (see Info & Metrics tab above).

The aim was to study the evolution of radiographic patterns of osteointegration of tapered wedge stems and determine if there is correlation with bony morphology and initial stem fit. We reviewed primary total hip replacements performed by two surgeons using a single cementless tapered wedge design and that had a complete series of radiographs (defined as preoperative, 6 weeks, 1 year and 5 or more years). Signs of bony remodeling were recorded at each Gruen zone. Calcar remodeling, changes in cortical thickness, evidence of subsidence and pedestal formation were recorded (Figure 1). 57 hips (50 patients) were available for analysis with a mean follow up of 5.03 years. Mean changes in cortical thickness were positive in zones 2(7.51) and 6(5.36) and negative in zones 1(−7.53) and 7(−13.51). Radiolucent lines were found in gruen zones 3,4(39%), and 5. Femoral neck cancellization was seen in zone 7 in 8 patients (14%) in year 1 and 36 (63%) by year 5. Correlations were seen with proximal canal fill and radiolucent lines at zones 3 (0.278; p0.36) and 5 (0.258; p 0.05) and with distal canal fill and hypertrophy of the cortex in zone 3 (0.429; p0.001) and 5. Cortical hypertrophy around the midstem, lack of radiolucent lines around the proximal stem and cancellization of the calcar are all radiographic patterns which occur routinely. A positive correlation with distal canal fill and hypertrophy of zones 3 and 5 was noted. There was no significant correlation with preoperative boney morphology or initial stem fit proximally

Modulus femoral prosthesis is a modular cementless femoral system which consists of 5 degree tapered conical stem made of a titanium alloy with 8 fins of 1mm and modular neck. Modular neck enables to control any ideal stem anteversion as a surgeon prefers. This system is considered to be useful in severe hip deformity, for example developmental dysplasia of the hip (DDH). In this study, clinical and radiographic outcomes of the Modulus femoral prosthesis were evaluated at a mean of 3.6 (2–6) years postoperatively. We assessed the results of 193 primary total hip arthroplasty using a Modulus femoral prosthesis in 169 patients (15 males, 154 females) undergoing surgery between September 2007 and December 2011. The mean age at the time of surgery was 65.6 (31–86) years old. The diagnoses were osteoarthritis (OA) in 178 hips (including 167 hips of DDH), rapidly destructive coxopathy (RDC) in 6 hips, rheumatoid arthritis (RA) in 6 hips, osteonecrosis in 2 hips, and subchondral insufficiency fracture in one hip. Clinical outcomes were assessed using Japan Orthopedic Association (JOA) hip scores and complications. Radiographic assessments were including stem alignment, bone on-growth, cortical hypertrophy, stress shielding and stem subsidence. 43.8 points of the preoperative mean JOA score was significantly improved to 93.1 points postoperatively. In one case intraoperative femoral fracture was occurred. One dislocation had occurred and thigh pain was observed in one hip. No revision surgery was required. In 192 hips of 193 hips (99.5%), stem was implanted in neutral position (within ±2 degrees). Bone on-growth was observed in all cases (94.3% in zone 3; 73.1% in zone 5; 30.6% in zone 2; 22.3% in zone 6). Cortical hypertrophy was observed in 66 hips (34.2%) at zone 3 and 5. Reduction of bone density due to stress shielding was observed (1. st. degree was 58.5%; 2. nd. degree was 29.5%; 3. rd. degree was 11.9%; 4. th. degree was 0%). In 22 cases (11.4%), more than 2mm of stem subsidence was observed, however the subsidence was stopped within 6 months in all cases. Modulus femoral prosthesis showed good clinical results and radiographic findings up to 6 years postoperatively

Background. We occasionally come across cortical atrophy of the femur with cemented collarless polished triple-taper stem, a short time after the operation. This study aimed to estimate the radiographs of cemented collarless polished triple-taper stem taken at three, six, twelve, and twenty-four months after the initial operation. Methods. Between May 2009 and April 2011, 97 consecutive patients underwent primary total hip arthroplasty and hemiarthroplasty using a SC-stem or C-stem implant. During the 24 month follow-up, radiographic examination was performed on a total of 95 patients (98 hips). Out of those 95 patients, 52 hips had total hip arthroplasty, 45 had osteoarthritis, 5 had idiopathic osteonecrosis, there were two 2 other cases and 46 hips had hemiarthroplasty for femoral neck fractures. The cementing grade was estimated on the postoperative radiographs. The 24 month postoperative radiographs were analyzed for changes in stem subsidence, cortical atrophy and cortical hypertrophy. According to the Gruen zone, cortical atrophy and cortical hypertrophy were classified on the femoral side. We defined no cortical atrophy as grade 0, cortical atrophy less than 1 mm as grade 1, more than 1 mm and less than 2 mm as grade 2, and more than 2 mm as grade 3. We defined Grade 1 as 1 point, Grade 2 as 2 points, and Grade 3 as 3 points. The points in every zone were calculated, and the average per zone was determined. Result. The mean points of the cortical atrophy adjacent to the stem was 1.19 in THA, and 1.58 in BHA in zone II, 0.98 in THA, and 1.15 in BHA in zone III, 0.34 in THA, and 0.6 in BHA in zone V, and 0.63 in THA, and 0.93 in BHA in zone VI. Statistical significance was found between the two groups (THA and BHA). Stem subsidence slightly increased with time. During the following 2 years there was not a single case with over 1.5mm of stem subsidence. The average stem subsidence after 24 months was 0.72 in THA, and 0.78 in BHA. Cortical hypertrophy was only demonstrated in 5 cases. Discussion. Cortical atrophy was recognized more in the femoral neck fracture group than in the THA group, and cortical atrophy was recognized in zone 2 and zone 3 more frequently than in zone 5 and zone 6. According to the finite element analysis of the SC-stem, more stress is received on the medial aspect of the stem during weight bearing, so it is suspected that more cortical atrophy on the lateral aspect is associated with stem design. These findings are compatible with the cortical hypertrophy reported with Exeter stem in zone 5. Conclusion. Cortical atrophy (cancellizaton) was recognized in 70% of THA group, and in 80% of BHA group, 2 years after the operation. Cortical atrophy in most cases was recognized in Gruen Zones 2 & 3 (P<0.01). Cortical atrophy was found more severely and more frequently in the femoral neck fracture group than the THA group (P<0.01)

Objective. While the short-stem design is not a new concept, interest has risen with increasing utilization of less invasive techniques. Especially, short stems are easier to insert through the direct anterior approach. In the radiographic evaluation of patients who underwent primary uncemented total hip arthroplasty (THA) using a TaperLoc Microplasty femoral component (Biomet, Warsaw, IN, USA), cortical hypertrophy was occasionally detected on three-month postoperative radiographs. The purpose of this study was to evaluate the radiographic changes associated with cortical hypertrophy of the femur three months postoperatively. Methods. Between May 2010 and September 2014, 645 hips in 519 patients who received the TaperLoc Microplasty stem were evaluated. Six hips in four patients were lost to follow-up. Finally, 639 hips in 515 patients were included in this study; 248 hips underwent bilateral simultaneous THA and 391 hips underwent unilateral THA. There were 103 males and 412 females (average age, 63 ± 10.1 years; average height, 156 ± 8.13 cm; and average weight, 58 ± 12.2 kg). The postoperative radiographs immediately taken after the operation and three months postoperatively were compared. We evaluated cortical hypertrophy around the stem. Cortical hypertrophy >2 mm on anterior-posterior X-ray was defined as “excessive periosteal reaction” (Figure 1). Results. Twenty-four (3.76%) of the 639 hips had an excessive periosteal reaction. Eight (1.25%) hips underwent bilateral simultaneous THA and sixteen (2.5%) hips underwent unilateral THA. With regard to the prevalence of the excessive periosteal reaction, there were no significant differences between the patients who underwent the unilateral procedure compared with those who underwent the bilateral procedure. Of these 24hips, 12 (50%) showed thigh pain in patients after surgery. The patients with an excessive periosteal reaction had an average age of 66 ± 9.02 years, an average height of 157 ± 6.4 cm, and an average weight of 61 ± 10.3 kg. There were no significant differences in age, height, and weight between the patients with an excessive periosteal reaction and all study patients. The thigh pain resolved spontaneously within three months after surgery in all patients, and no patient required revision surgery. Six (0.94%) hips had femoral periprosthetic fractures in the early postoperative period. Conclusions. Excessive periosteal reaction, which was defined as cortical hypertrophy >2 mm on anterior-posterior X-ray three month postoperatively, occurred in 3.75% of the patients who received the TaperLoc Microplasty stem. Thigh pain occurred in half of the patients who had an excessive periosteal reaction. We speculated that this reaction was caused by the concentration of the torque or vertical load on the limited area of the femur in the early postoperative period. This stress was accompanied by femoral periprosthetic fractures in the early postoperative period, and patients without femoral periprosthetic fractures experienced an excessive periosteal reaction with thigh pain

This study shows the radiographic results of total hip arthroplasty (THA) using Revelation stem ® (Djo surgical USA) for hip joint disease. We removed cases which we couldn't follow up, the remaining of the patients who had undergone a primary THA July 2007 to December 2009 in our institution using Revelation hip stem® and 58 cases-65 hips (14 men and 44 women) were possible for progress observation on this study, and radiographic evaluation was done at the time of the last observation. The preoperative diagnosis of the hip included osteoarthritis (OA) in 40 patients, idiopatic, necrosis of the hip in 13 patients, Rheumatoid arthritis (RA) in 4 patients, and femoral head fracture in 1 patient. Three patients had undergone femoral head replacement (FHA) and 55 patients had undergone THA. At the time of the last evaluation, spot welds were detected in 63 hips (97%) in zone1 and 7. Demarcation lines, which indicates movement of the stem, were detected in zone3,4,5, but not in the proximal of the stem. Stress shielding were observed in 32 joints, according to Engh's classification, first degree were 27 joints and second degree were 5 joints. Cortical hypertrophy were detected in 13 joints. The revelation stem features a lateral overhang structure (lateral flare) and the stem has an expanded proximal geometry allowing the device to rest on both medial and lateral cortices at the metaphyseal level. Above all the stem has anterior overhand structure (trapezoidal structure). The medullary cavity occupation rate is made to increase by these structures. Above all, the stability of the stem is increased by a proximal portion by three point support. The distal stem is tapered and polished, which prevents the stress loading to a distal portion of the device. Stress shielding more than the third degree is not detected, and spots welds were detected in the proximal of the stem. These facts indicate that the concept of this stem, transmit loading to the femur bone, at the proximal portion of the stem, would be achieved

Purpose. Exeter stem was introduced to Japanese market at 1996. Since then, owing to its excellent clinical results, the number of the stem used has been increased year by year and more than 2000 stems have been implanted during the year 2009. The present study aims to prove its efficacy for Japanese patients by evaluating short term results of four major dedicated hip centers. Method. We present the short-term multi-center results of primary THA with Exeter stem combined with modern cementing technique in 881 patients (1000 hips). The average age of the patients at operation was 62.3years (ranging 23 to 89 years). Mean postoperative follow up period was 4.0 (ranging 2 to 9) years. Results. Intraoperative complications such as femoral fracture were observed in 6 hips. Postoperative cementing grade using Barrack's classification was judged as A for 735 hips, as B for 246 hips, and as C for 4 hips, respectively. Twenty-four patients died with unrelated disease and 52 patients were lost during follow-up period. Follow-up ratio was 94.8%. Thirty postoperative complications which include 9 infections, 14 dislocations, 5 deep vein thrombosis, and 2 sciatic nerve palsies were observed. Symptomatic pulmonary embolization or femoral fracture was not observed. Re-operations for infection and dislocation were performed for 8 and 6 hips, respectively. At the final follow-up, no radiolucent line at bone-cement interface was observed. Cortical hypertrophy was observed in 9.6% at Gruen zone 2 to 6. Kaplan-Meier survivorship analysis predicted a rate of survival at 5 years of 100% with radiolucent line at bone-cement interface of the femur as the endpoint, and of 98.8% when re-operation for any reason was used. Conclusion. The present study revealed excellent short-term result was obtained using Exeter stem combined with modern cementing technique for primary THAs in Japan

Aims

Limb-lengthening nails have largely replaced external fixation in limb-lengthening and reconstructive surgery. However, the adverse events and high prevalence of radiological changes recently noted with the STRYDE lengthening nail have raised concerns about the use of internal lengthening nails. The aim of this study was to compare the prevalence of radiological bone abnormalities between STRYDE, PRECICE, and FITBONE nails prior to nail removal.

Aims: To evaluate clinical and radiographicl results of hydroxyapatite versus porous coated stems in total hip arthroplasty. Methods: A consecutive randomized series of 447 cementless Titanium prostheses were prospectically studied. The stems (Synergy-Smith& Nephew) were different for the proximal 1/3 hydroxyapatite (HA=268) or titanium porous coating (PC=179) Same cup and ball head were used. Clinical (HHS/Womac) and radiological assessments (Enghñs criteria) were obtained before and after surgery (mean F-U=27,05 months). Results: The clinical outcomes showed a signiþcant improvement in both groups. Bone ingrowth was present in 100% (HA) and 96% (PC) and stable þbrous ingrowth in 4% (PC). Cortical hypertrophy and heterotopic ossiþcation (Brooker 1) were prevalent in HA without limitation of ROM or pain. Stress shielding was equivalent. Nor osteolysis neither subsidence were identiþed. Fractures occurred in 8 cases (HA=6/PC=2) and dislocation in 3 cases. Conclusions: In this study the two types of stems showed good comparable clinical results. The complication were not related to the coating. HA coated prosthesis showed faster osseointegration, and enhanced bone ingrowth. The earlier bone-stable integration obtained in the HA group may be predictive of a lesser degree of osteolysis in the future