Aims. It has been established that mechanical stimulation benefits tendon-bone (T-B) healing, and macrophage phenotype can be regulated by mechanical cues; moreover, the interaction between macrophages and mesenchymal stem cells (MSCs) plays a fundamental role in tissue repair. This study aimed to investigate the role of macrophage-mediated MSC chondrogenesis in load-induced T-B healing in depth. Methods. C57BL/6 mice rotator cuff (RC) repair model was established to explore the effects of mechanical stimulation on macrophage polarization, transforming growth factor (TGF)-β1 generation, and MSC chondrogenesis within T-B enthesis by immunofluorescence and enzyme-linked immunosorbent assay (ELISA). Macrophage depletion was performed by clodronate liposomes, and T-B healing quality was evaluated by histology and biomechanics. In vitro, bone marrow-derived macrophages (BMDMs) were stretched with CELLOAD-300 load system and macrophage polarization was identified by flow cytometry and quantitative real-time polymerase chain reaction (qRT-PCR). MSC chondrogenic differentiation was measured by histochemical analysis and qRT-PCR. ELISA and qRT-PCR were performed to screen the candidate molecules that mediated the pro-chondrogenic function of mechanical stimulated BMDMs. Results. Mechanical stimulation promoted macrophage M2 polarization in vivo and in vitro. The conditioned media from mechanically stimulated BMDMs (MS-CM) enhanced MSC chondrogenic differentiation, and mechanically stimulated BMDMs generated more TGF-β1. Further, neutralizing TGF-β1 in MS-CM can attenuate its pro-chondrogenic effect. In vivo, mechanical stimulation promoted TGF-β1 generation, MSC chondrogenesis, and T-B healing, which were abolished following macrophage depletion. Conclusion. Macrophages subjected to appropriate mechanical stimulation could polarize toward the M2 phenotype and secrete TGF-β1 to promote MSC chondrogenesis, which subsequently augments T-B healing. Cite this article: Bone Joint Res 2023;12(3):219–230

Aims. The number of rotator cuff repairs that are undertaken is increasing. Reverse shoulder arthroplasty (RSA) is the procedure of choice for patients with rotator cuff arthropathy. We sought to determine whether patients who underwent rotator cuff repair and subsequent RSA had different outcomes compared with a matched control group who underwent RSA without a previous rotator cuff repair. Patients and Methods. All patients with a history of rotator cuff repair who underwent RSA between 2000 and 2015 with a minimum follow-up of two years were eligible for inclusion as the study group. Outcomes, including the American Shoulder and Elbow Surgeons (ASES) scores, were compared with a matched control group of patients who underwent RSA without having previously undergone rotator cuff repair. Results. The study group included 45 patients. Their mean age was 69 years (. sd. 8.6) and 27 patients (60%) were women. The mean ASES score improved from 43.1 to 76.6 two years postoperatively, and to 66.9 five years postoperatively. There was no significant difference between the outcomes at two years in the two groups (all p ≥ 0.05), although there was significantly more improvement in ASES scores in the control group (44.5 vs 33.4; p = 0.01). However, there was no significant difference between ASES scores at two and five years when baseline ASES scores were matched in the two groups (p = 0.42 at two years; p = 0.35 at five years). Conclusion. Significant improvements in ASES scores were seen following RSA in patients who had previously undergone rotator cuff repair. They had higher baseline ASES scores than those who had not previously undergone this surgery. However, there was no significant difference in outcomes between the two groups, two years postoperatively. Previous rotator cuff repair does not appear to affect the early outcome after RSA adversely

Aims. The aim of this study was to compare the osseous reactions elicited by all-suture, polyetheretherketone (PEEK), and two different biodegradable anchors used during rotator cuff repair. Patients and Methods. Transosseous-equivalent rotator cuff repair was performed in 73 patients. The patients were divided into two groups, in both of which two different medial-row anchors were used. In group 1, anchor A comprised 30% β-tricalcium phosphate (TCP) + 70% fast-absorbing poly lactic-co-glycolic acid copolymer (85% polylactic acid enantiomers + 15% polyglycolic acid) and anchor B comprised all-sutures. In group 2, anchor C comprised 23% micro β-TCP + 77% polylactic acid enantiomers and anchor D comprised PEEK polymer. There were 37 patients in group 1 and 36 patients in group 2. The presence and severity of fluid collection around anchors and healing of the rotator cuff were assessed using MRI scans, approximately one year postoperatively. The severity of the collection was graded as 0 (no perianchor fluid signal), 1 (minimal perianchor fluid), 2 (local collection of fluid), 3 (fluid collection around the whole length of the anchor but of a diameter less than twice the anchor diameter), or 4 (fluid collection around the whole length of the anchor and of a diameter greater than twice the anchor diameter). Results. A perianchor fluid signal was seen in three patients (8.1%) with anchor A, four (10.8%) with anchor B, 15 (41.7%) with anchor C, and 15 (41.7%) with anchor D. The severity of the collection around anchor was grade 2:1:0:0 for anchor A, grade 2:2:0:0 for anchor B, grade 12:2:0:1 for anchor C, and grade 11:3:0:1 for anchor D (grade 1:2:3:4, respectively). The prevalence and severity of fluid formation was not significantly different between anchors A and B, and anchors C and D. However, on intergroup analysis, there were significant differences for the prevalence and severity of fluid formation between anchors in group 1 and group 2. The prevalence of failure to heal was not significant in group 1 (seven, 18.9%) or group 2 (nine, 25.0%). There was no relationship between the presence of perianchor fluid and each type of anchor, and the integrity of the rotator cuff repair, in either group. Conclusion. Despite the nonabsorbable nature of all-suture and PEEK anchors, all-suture anchors produced less osseous reaction after rotator cuff repair. In deciding which kind of anchor to use, consideration should be given not only to the strength of the initial fixation, but also to the postoperative biological reaction. Cite this article: Bone Joint J 2019;101-B:1506–1511

Objectives. All-suture anchors are increasingly used in rotator cuff repair procedures. Potential benefits include decreased bone damage. However, there is limited published evidence for the relative strength of fixation for all-suture anchors compared with traditional anchors. Materials and Methods. A total of four commercially available all-suture anchors, the ‘Y-Knot’ (ConMed), Q-FIX (Smith & Nephew), ICONIX (Stryker) and JuggerKnot (Zimmer Biomet) and a traditional anchor control TWINFIX Ultra PK Suture Anchor (Smith & Nephew) were tested in cadaveric human humeral head rotator cuff repair models (n = 24). This construct underwent cyclic loading applied by a mechanical testing rig (Zwick/Roell). Ultimate load to failure, gap formation at 50, 100, 150 and 200 cycles, and failure mechanism were recorded. Significance was set at p < 0.05. Results. Overall, mean maximum tensile strength values were significantly higher for the traditional anchor (181.0 N, standard error (. se). 17.6) compared with the all-suture anchors (mean 133.1 N . se. 16.7) (p = 0.04). The JuggerKnot anchor had greatest displacement at 50, 100 and 150 cycles, and at failure, reaching statistical significance over the control at 100 and 150 cycles (22.6 mm . se. 2.5 versus 12.5 mm . se. 0.3; and 29.6 mm . se. 4.8 versus 17.0 mm . se. 0.7). Every all-suture anchor tested showed substantial (> 5 mm) displacement between 50 and 100 cycles (6.2 to 14.3). All-suture anchors predominantly failed due to anchor pull-out (95% versus 25% of traditional anchors), whereas a higher proportion of traditional anchors failed secondary to suture breakage. Conclusion. We demonstrate decreased failure load, increased total displacement, and variable failure mechanisms in all-suture anchors, compared with traditional anchors designed for rotator cuff repair. These findings will aid the surgeon’s choice of implant, in the context of the clinical scenario. Cite this article: N. S. Nagra, N. Zargar, R. D. J. Smith, A. J. Carr. Mechanical properties of all-suture anchors for rotator cuff repair. Bone Joint Res 2017;6:82–89. DOI: 10.1302/2046-3758.62.BJR-2016-0225.R1

Aims. Many biomechanical studies have shown that the weakest biomechanical point of a rotator cuff repair is the suture-tendon interface at the medial row. We developed a novel double rip-stop (DRS) technique to enhance the strength at the medial row for rotator cuff repair. The objective of this study was to evaluate the biomechanical properties of the DRS technique with the conventional suture-bridge (SB) technique and to evaluate the biomechanical performance of the DRS technique with medial row knots. Methods. A total of 24 fresh-frozen porcine shoulders were used. The infraspinatus tendons were sharply dissected and randomly repaired by one of three techniques: SB repair (SB group), DRS repair (DRS group), and DRS with medial row knots repair (DRSK group). Specimens were tested to failure. In addition, 3 mm gap formation was measured and ultimate failure load, stiffness, and failure modes were recorded. Results. The mean load to create a 3 mm gap formation in the DRSK and DRS groups was significantly higher than in the SB group. The DRSK group had the highest load to failure with a mean ultimate failure load of 395.0 N (SD 56.8) compared to the SB and DRS groups, which recorded 147.1 N (SD 34.3) and 285.9 N (SD 89.8), respectively (p < 0.001 for both). The DRS group showed a significantly higher mean failure load than the SB group (p = 0.006). Both the DRS and DRSK groups showed significantly higher mean stiffness than the SB group. Conclusion. The biomechanical properties of the DRS technique were significantly improved compared to the SB technique. The DRS technique with medial row knots showed superior biomechanical performance than the DRS technique alone

We explored the trends over time and the geographical variation in the use of subacromial decompression and rotator cuff repair in 152 local health areas (Primary Care Trusts) across England. The diagnostic and procedure codes of patients undergoing certain elective shoulder operations between 2000/2001 and 2009/2010 were extracted from the Hospital Episode Statistics database. They were grouped as 1) subacromial decompression only, 2) subacromial decompression with rotator cuff repair, and 3) rotator cuff repair only. The number of patients undergoing subacromial decompression alone rose by 746.4% from 2523 in 2000/2001 (5.2/100 000 (95% confidence interval (CI) 5.0 to 5.4) to 21 355 in 2009/2010 (40.2/100 000 (95% CI 39.7 to 40.8)). Operations for rotator cuff repair alone peaked in 2008/2009 (4.7/100 000 (95% CI 4.5 to 4.8)) and declined considerably in 2009/2010 (2.6/100 000 (95% CI 2.5 to 2.7)). Given the lack of evidence for the effectiveness of these operations and the significant increase in the number of procedures being performed in England and elsewhere, there is an urgent need for well-designed clinical trials to determine evidence of clinical effectiveness. Cite this article: Bone Joint J 2014;96-B:70–4

We assessed the clinical results, radiographic outcomes and complications of patients undergoing total shoulder replacement (TSR) for osteoarthritis with concurrent repair of a full-thickness rotator cuff tear. Between 1996 and 2010, 45 of 932 patients (4.8%) undergoing TSR for osteoarthritis underwent rotator cuff repair. The final study group comprised 33 patients with a mean follow-up of 4.7 years (3 months to 13 years). Tears were classified into small (10), medium (14), large (9) or massive (0). On a scale of 1 to 5, pain decreased from a mean of 4.7 to 1.7 (p = < 0.0001), the mean forward elevation improved from 99° to 139° (p = < 0.0001), and the mean external rotation improved from 20° (0° to 75°) to 49° (20° to 80°) (p = < 0.0001). The improvement in elevation was greater in those with a small tear (p = 0.03). Radiographic evidence of instability developed in six patients with medium or large tears, indicating lack of rotator cuff healing. In all, six glenoid components, including one with instability, were radiologically at risk of loosening. Complications were noted in five patients, all with medium or large tears; four of these had symptomatic instability and one sustained a late peri-prosthetic fracture. Four patients (12%) required further surgery, three with instability and one with a peri-prosthetic humeral fracture. . Consideration should be given to performing rotator cuff repair for stable shoulders during anatomical TSR, but reverse replacement should be considered for older, less active patients with larger tears. Cite this article: Bone Joint J 2014;96-B:224–8

A cadaver study was performed to determine the effect of arm position and capsular release on rotator cuff repair. Artificial defects were made in the rotator cuff to include only the supraspinatus (small) or both supraspinatus and infraspinatus (large). The defects were repaired in a standard manner with the shoulder abducted 30 degrees at the glenohumeral joint. Strain gauges were placed on the lateral cortex of the greater tuberosity and measurements were recorded in 36 different combinations of abduction, flexion/extension, and medial/lateral rotation. Readings were obtained before and after capsular release. With small tears, tension in the repair increased significantly with movement from 30 degrees to 15 degrees of abduction (p < 0.01) but was minimally affected by changes in flexion or rotation. Capsular release significantly reduced the force (p < 0.01) at 0 degree and 15 degrees abduction. For large tears, abduction of 30 degrees or more with lateral rotation and extension consistently produced the lowest values. Capsular release resulted in 30% less force at 0 degree abduction (p < 0.05)

Objectives

The aim of this study was to determine whether there is any significant difference in temporal measurements of pain, function and rates of re-tear for arthroscopic rotator cuff repair (RCR) patients compared with those patients undergoing open RCR.

The December 2022 Shoulder & Elbow Roundup. 360. looks at: Biceps tenotomy versus soft-tissue tenodesis in females aged 60 years and older with rotator cuff tears; Resistance training combined with corticosteroid injections or tendon needling in patients with lateral elbow tendinopathy; Two-year functional outcomes of completely displaced midshaft clavicle fractures in adolescents; Patients who undergo rotator cuff repair can safely return to driving at two weeks postoperatively; Are two plates better than one? A systematic review of dual plating for acute midshaft clavicle fractures; Treatment of acute distal biceps tendon ruptures; Rotator cuff tendinopathy: disability associated with depression rather than pathology severity; Coonrad-Morrey total elbow arthroplasty implications in young patients with post-traumatic sequelae

Aims. The purpose of this study was to identify the changes in untreated long head of the biceps brachii tendon (LHBT) after a rotator cuff tear and to evaluate the factors related to the changes. Methods. A cohort of 162 patients who underwent isolated supraspinatus with the preservation of LHBT was enrolled and evaluated. The cross-sectional area (CSA) of the LHBT on MRI was measured in the bicipital groove, and preoperative to postoperative difference was calculated at least 12 months postoperatively. Second, postoperative changes in the LHBT including intratendinous signal change, rupture, dislocation, or superior labral lesions were evaluated with seeking of factors that were correlated with the changes or newly developed lesions after rotator cuff repair. Results. The postoperative CSA (12.5 mm. 2. (SD 8.3) was significantly larger than preoperative CSA (11.5 mm. 2. (SD 7.5); p = 0.005). In total, 32 patients (19.8%) showed morphological changes in the untreated LHBT 24 months after rotator cuff repair. Univariate regression analysis revealed that the factor chiefly related to the change in LHBT status was an eccentric LHBT position within the groove found on preoperative MRI (p = 0.011). Multivariate analysis using logistic regression also revealed that an eccentric LHBT position was a factor related to postoperative change in untreated LHBTs (p = 0.011). Conclusion. The CSA of the LHBT inside the biceps groove increased after rotator cuff repair. The preoperative presence of an eccentrically positioned LHBT was associated with further changes of the tendon itself after rotator cuff repair. Cite this article: Bone Joint J 2020;102-B(9):1194–1199

Re-rupture rates after rotator cuff repair remain high because of inadequate biological healing at the tendon-bone interface. Single-growth factor therapies to augment healing at the enthesis have so far yielded inconsistent results. An emerging approach is to combine multiple growth factors over a spatiotemporal distribution that mimics normal healing. We propose a novel combination treatment of insulin-like growth factor 1 (IGF-1), transforming growth factor β1 (TGF-β1) and parathyroid hormone (PTH) incorporated into a controlled-release tyraminated poly-vinyl-alcohol hydrogel to improve healing after rotator cuff repair. We aimed to evaluate this growth factor treatment in a rat chronic rotator cuff tear model. A total of 30 male Sprague-Dawley rats underwent unilateral supraspinatus tenotomy. Delayed rotator cuff repairs were then performed after 3 weeks, to allow tendon degeneration that resembles the human clinical scenario. Animals were randomly assigned to: [1] a control group with repair alone; or [2] a treatment group in which the hydrogel was applied at the repair site. All animals were euthanized 12 weeks after rotator cuff surgery and the explanted shoulders were analyzed for biomechanical strength and histological quality of healing at the repair site. In the treatment group had significantly higher stress at failure (73% improvement, P=0.003) and Young's modulus (56% improvement, P=0.028) compared to the control group. Histological assessment revealed improved healing with significantly higher overall histological scores (10.1 of 15 vs 6.55 of 15, P=0.032), and lower inflammation and vascularity. This novel combination growth factor treatment improved the quality of healing and strength of the repaired enthesis in a chronic rotator cuff tear model. Further optimization and tailoring of the growth factors hydrogel is required prior to consideration for clinical use in the treatment of rotator cuff tears. This novel treatment approach holds promise for improving biological healing of this clinically challenging problem

Rotator cuff repair has excellent clinical outcomes but continues to be a challenge when it comes to large and massive tears as well as revision procedures. Reported symptomatic retear rates are still too high to be acceptable. The purpose of the present study was to evaluate the effectiveness of a combination of augmentation techniques consisting of microfractures of the greater tuberosity, extracellular matrix (ECM) patch graft and subsequent platelet concentrate (PC) subacromial injections in revision rotator cuff repair. The study was designed as a retrospective comparative study on prospectively collected data from a consecutive cohort of patients. All patients who underwent arthroscopic revision rotator cuff repair for symptomatic failure of previous posterosuperior rotator cuff repair were considered eligible for the study. Symptomatic failure had been diagnosed according to clinical examination and confirmed by magnetic resonance imaging (MRI). Structural integrity had been assessed on MRI and classified according to Sugaya classification. Only patients affected by stage IV-V were considered eligible. Tear reparability was confirmed during arthroscopy. Only patients with a minimum 2 years follow-up were included. Patients were divided in two groups. In group 1 (control group) a standard arthroscopic revision and microfractures of the greater tuberosity were performed; in group 2 (experimental group), microfractures of the greater tuberosity and a ECM patch graft were used to enhance tendon repair, followed by postoperative PC injections. Minimum follow-up was 12 months. Primary outcome was the Constant-Murley score (CMS) normalized for age and gender. Subjective outcome was assessed with the Disabilities of the Arm, Shoulder and Hand (DASH) score in its short version (Quick-DASH). Tendon integrity was assessed with MRI at 6 months after surgery. Comparison between groups for all discrete variables at baseline and at follow-up was carried out with the Student's t-test for normally distributed data, otherwise Mann-Whitney U-test was used. Within-group differences (baseline vs follow-up) for discrete variables were analyzed by paired t-test, or by Wilcoxon signed-rank test in case of data with non-normal distribution. Differences for categorical variables were assessed by chi-squared test. Significance was considered for p values < 0.05. Forty patients were included in the study (20 patients for each group). The mean follow-up was 13 ± 1.6 months. No patients were lost at the follow up. Comparison between groups did not show significant differences for baseline characteristics. At follow-up, mean CMS was 80.7 ± 16.6 points in group 1 and 91.5 ± 11.5 points in group 2 (p= 0.022). Mean DASH score was 28.6 ± 21.6 points in group 1 and 20.1 ± 17.4 points in group 2 (p= 0.178). Post-operative MRI showed 6 healed shoulders in Group 1 and 16 healed shoulders in Group 2 (p<0.004). No postoperative complications were reported in both groups. The combination of microfractures of the greater tuberosity, ECM patch graft, and subsequent PC subacromial injections is an effective strategy in improving tendon healing rate

The February 2023 Shoulder & Elbow Roundup. 360. looks at: Arthroscopic capsular release or manipulation under anaesthesia for frozen shoulder?; Distal biceps repair through a single incision?; Distal biceps tendon ruptures: diagnostic strategy through physical examination; Postoperative multimodal opioid-sparing protocol vs standard opioid prescribing after knee or shoulder arthroscopy: a randomized clinical trial; Graft healing is more important than graft technique in massive rotator cuff tear; Subscapularis tenotomy versus peel after anatomic shoulder arthroplasty; Previous rotator cuff repair increases the risk of revision surgery for periprosthetic joint infection after reverse shoulder arthroplasty; Conservative versus operative treatment of acromial and scapular spine fractures following reverse total shoulder arthroplasty

The purpose of this study is the evaluate the net promotor score of arthroscopic subacromial decompression and rotator cuff repair. The Friends and Family Test, a variant of the Net Promoter Score, was adapted for the National Health Service to evaluate overall patient satisfaction and how likely patients are to recommend an intervention. It ranges from −100 to 100. Positive scores indicate good performance. This study quantifies the scores in 71 patients at 1 year following arthroscopic sub acromial decompression and rotator cuff repair. All of the procedures were performed by 1 consultant shoulder specialist. The patient filled out a shoulder questionnaire pre-operatively, at 6 months and 1 year. The score was 72 for subacromial decompression (n = 32) and 85 for rotator cuff repair +/− decompression (n = 39). Oxford shoulder score was also taken and had a rise of 4.3 and 6.9 respectively. Our study indicates that these procedures are highly valued and are recommended by patients according to the Friends and Family Test. The results of the Friends and Family Test correlated well with postoperative functional improvement and satisfaction. We conclude from this study that a compound score based on the Friends and Family Test is a useful addition to traditional measures of patient satisfaction

Objectives. Platelet-rich fibrin matrix (PRFM) has been proved to enhance tenocyte proliferation but has mixed results when used during rotator cuff repair. The optimal PRFM preparation protocol should be determined before clinical application. To screen the best PRFM to each individual’s tenocytes effectively, small-diameter culture wells should be used to increase variables. The gelling effect of PRFM will occur when small-diameter culture wells are used. A co-culture device should be designed to avoid this effect. Methods. Tenocytes harvested during rotator cuff repair and blood from a healthy volunteer were used. Tenocytes were seeded in 96-, 24-, 12-, and six-well plates and co-culture devices. Appropriate volumes of PRFM, according to the surface area of each culture well, were treated with tenocytes for seven days. The co-culture device was designed to avoid the gelling effect that occurred in the small-diameter culture well. Cell proliferation was analyzed by water soluble tetrazolium-1 (WST-1) bioassay. Results. The relative quantification (condition/control) of WST-1 assay on day seven revealed a significant decrease in tenocyte proliferation in small-diameter culture wells (96 and 24 wells) due to the gelling effect. PRFM in large-diameter culture wells (12 and six wells) and co-culture systems induced a significant increase in tenocyte proliferation compared with the control group. The gelling effect of PRFM was avoided by the co-culture device. Conclusion. When PRFM and tenocytes are cultured in small-diameter culture wells, the gelling effect will occur and make screening of personalized best-fit PRFM difficult. This effect can be avoided with the co-culture device. Cite this article: C-H. Chiu, P. Chen, W-L. Yeh, A. C-Y. Chen, Y-S. Chan, K-Y. Hsu, K-F. Lei. The gelling effect of platelet-rich fibrin matrix when exposed to human tenocytes from the rotator cuff in small-diameter culture wells and the design of a co-culture device to overcome this phenomenon. Bone Joint Res 2019;8:216–223. DOI: 10.1302/2046-3758.85.BJR-2018-0258.R1

Tendons mainly consist of collagen in order to withstand high tensile forces. Compared to other, high turnover tissues, cellularity and vascularity in tendons are low. Thus, the natural healing process of tendons takes long and can be problematic. In case of injury to the enthesis, the special transition from tendon over cartilage to bone is replaced by a fibrous scar tissue, which remains an unsolved problem in rotator cuff repair. To improve tendon healing, many different approaches have been described using scaffolds, stem cells, cytokines, blood products, gene therapy and others. Despite promising in vitro and in vivo results, translation to patient care is challenging. In clinics however, tendon auto- or allografts remain still first choice to augment tendon healing if needed. Therefore, it is important to understand natural tendon properties and natural tendon healing first. Like in other tissues, senescence of tenocytes seems to play an important role for tendon degeneration which is interestingly not age depended. Our in vivo healing studies have shown improved and accelerated healing by adding collagen type I, which is now used in clinics, for example for augmentation of rotator cuff repair. Certain cytokines, cells and scaffolds may further improve tendon healing but are not yet used routinely, mainly due to missing clinical data, regulatory issues and costs. In conclusion, the correct diagnosis and correct first line treatment of tendon injuries are important to avoid the necessity to biologically augment tendon healing. However, strategies to improve and accelerate tendon healing are still desirable. New treatment opportunities may arise with further advances in tendon engineering in the future

The June 2024 Shoulder & Elbow Roundup. 360. looks at: Reverse versus anatomical total shoulder replacement for osteoarthritis? A UK national picture; Acute rehabilitation following traumatic anterior shoulder dislocation (ARTISAN): pragmatic, multicentre, randomized controlled trial; acid for rotator cuff repair: a systematic review and meta-analysis of randomized controlled trials; Metal or ceramic humeral head total shoulder arthroplasty: an analysis of data from the National Joint Registry; Platelet-rich plasma has better results for long-term functional improvement and pain relief for lateral epicondylitis: a systematic review and meta-analysis of randomized controlled trials; Quantitative fatty infiltration and 3D muscle volume after nonoperative treatment of symptomatic rotator cuff tears: a prospective MRI study of 79 patients; Locking plates for non-osteoporotic proximal humeral fractures in the long term; A systematic review of the treatment of primary acromioclavicular joint osteoarthritis

Studies have shown that the trees minor plays an important role after total (TSA) and reverse (RSA) shoulder arthroplasty, as well as in maintenance of function in the setting of infraspinatus wasting. In this regard, teres minor hypertrophy has been described as a compensatory change in response to this infraspinatus wasting, and has been suggested that this compensatory hypertrophy may mitigate the loss of infraspinatus function in the patient with a large rotator cuff tear. The purpose of this study was to determine the prevalence of teres minor hypertrophy in a cohort of patients undergoing rotator cuff repair, and to determine its prognostic effect, if any, on outcomes after surgical repair. Over a 3 year period, all rotator cuff repairs performed in a single practice by 3 ASES member surgeons were collected. Inclusion criteria included both preoperative and postoperative validated outcomes measures (minimum 2 year), and preoperative Magnetic Resonance Imaging (MRI) scanning. 144 patients met all criteria. MRIs were evaluated for rotator cuff tear tendon involvement, tear size, and Goutallier changes of each muscle. In addition, occupational ratios were determined for the supraspinatus, infraspinatus, and teres minor muscles. Patients were divided into 2 groups, based upon whether they had teres minor hypertrophy or not, based on a previously established definition. A 2 way ANOVA was used to determine the effect of teres minor hypertrophy(tear size by hypertrophy) and Goutallier. Teres minor hypertrophy was a relatively common finding in this cohort of rotator cuff patients, with 51% of all shoulders demonstrating hypertrophy. Interestingly, in patients without an infraspinatus tear, teres minor hypertrophy was still present in 19/40 (48%) of patients. Teres minor hypertrophy had a significant, negative effect ASES scores after rotator cuff repair in patients with and without infraspinatus tearing, infraspinatus atrophy, and fatty infiltrative changes (P<0.05). In general, the presence of teres minor hypertrophy showed 10–15% less improvement (Figure 1) than when no hypertrophy was present, and this was consistent across all tear sizes, independent of Goutallier changes. Teres minor hypertrophy is a common finding in the setting of rotator cuff tearing, including in the absence of infraspinatus tearing. Contrary to previous publications, the presence of teres minor hypertrophy in patients with rotator cuff repair does not appear to be protective as a compensatory mechanism. While further study is necessary to determine the mechanism or implication of teres minor hypertrophy in setting of rotator cuff repair, our results show it is not a positive of outcomes following rotator cuff repair

The April 2015 Shoulder & Elbow Roundup. 360 . looks at: Distal clavicular resection not indicated in cuff repair?; Platelet-rich plasma in rotator cuff repair; Radial head geometry: time to change?; Heterotopic ossification in elbow trauma; Another look at heterotopic ossification in the humerus; Triceps on for total elbow arthroplasty?; Predicting outcomes in rotator cuff repair; Deltoid fatty infiltration and reverse shoulder arthroplasty

Aims. Advances in arthroscopic techniques for rotator cuff repair have made the mini-open approach less popular. However, the mini-open approach remains an important technique for repair for many surgeons. The aims of this study were to compare the integrity of the repair, the function of the shoulder and satisfaction post-operatively using these two techniques in patients aged > 50 years. Patients and Methods. We identified 22 patients treated with mini-open and 128 patients treated with arthroscopic rotator cuff repair of July 2007 and June 2011. The mean follow-up was two years (1 to 5). Outcome was assessed using the American Shoulder and Elbow Surgeons (ASES) and Simple Shoulder Test (SST) scores, and satisfaction. The integrity of the repair was assessed using ultrasonography. A power analysis ensured sufficient enrolment. Results. There was no statistically significant difference between the age, function, satisfaction, or pain scores (p > 0.05) of the two groups. The integrity of the repair and the mean SST scores were significantly better in the mini-open group (91% of mini-open repairs were intact versus 60% of arthroscopic repairs, p = 0.023; mean SST score 10.9 (standard deviation (. sd. ) 1.3) in the mini-open group; 8.9 (. sd. 3.5) in arthroscopic group; p = 0.003). The ASES scores were also higher in the mini-open group (mean ASES score 91.0 (. sd. 10.5) in mini-open group; mean 82.70 (. sd. 19.8) in the arthroscopic group; p = 0.048). Conclusion. The integrity of the repair and function of the shoulder were better after a mini-open repair than after arthroscopic repair of a rotator cuff tear in these patients. The functional difference did not translate into a difference in satisfaction. Mini-open rotator cuff repair remains a useful technique despite advances in arthroscopy. Cite this article: Bone Joint J 2017;99-B:245–9

The treatment of massive rotator cuff tears remains controversial. There is lack of studies comparing patient-reported outcomes (PROM) of arthroscopic massive rotator cuff repairs (RCR) against large, medium and small RCRs. Our study aims to report the PROM for arthroscopic massive RCR versus non-massive RCR. Patients undergoing an arthroscopic RCR under a single surgeon over a 5-year period were included. Demographic data were recorded. Pre-operative Quick-DASH and Oxford Shoulder Score (OSS) were prospectively collected pre-operatively and at final review (mean of 18 months post-operatively). The scores were compared to a matched cohort of patients who had large, medium or small RCRs. A post-hoc power analysis confirmed 98% power was achieved. 82 patients were included in the study. 42 (51%) patients underwent massive RCR. The mean age of patients undergoing massive RCR was 59.7 and 55% (n=23) were female. 21% of massive RCRs had biceps augmentation. Quick-DASH improved significantly from a mean of 46.1 pre-operatively to 15.6 at final follow-up for massive RCRs (p<0.001). OSS improved significantly from a mean of 26.9 pre-operatively to 41.4 at final follow up for massive RCRs (p<0.001). There was no significant difference in the final Quick-DASH and OSS scores for massive and non-massive RCRs (p=0.35 and p=0.45 respectively). No revision surgery was required within the minimum one year follow up timescale. Arthroscopic massive rotator cuff repairs have no functional difference to non-massive rotator cuff repairs in the short term follow up period and should be considered in appropriate patient groups

Rotator cuff repair (RCR) can be performed open or arthroscopically, with a recent dramatic increase in the latter. Despite controversy about the preferred technique, there has been an increase in the number of repairs performed arthroscopically. The purpose of this study was, therefore, to compare revision rates following open and arthroscopic RCR repair. Adult patients undergoing first-time, primary rotator cuff repair in Ontario, Canada (April 2003-March 2014) were identified using physician billing and hospital databases. Patients were followed for a minimum of two and up to 13 years for the primary outcome, revision rotator cuff repair, and secondary outcome, surgical site infection. The intervention considered was open versus arthroscopic technique. Patient factors (age, gender, residence, socioeconomic status, medical comorbidities) and provider factors (surgical volume, hospital setting, worked night before, year of surgery) were recorded. Standardized mean differences were used for covariate comparison. A Cox Proportional Hazards model was used to compare RCR survivorship between the two groups after adjustment for patient and provider factors, generating hazard ratios with 95% confidence intervals (HR, 95% CIs). Censoring occurred on the first of the primary outcome, death, shoulder arthroplasty or arthrodesis, or the end of the follow-up period (March 2016). A total of 37,255 patients were included. The overall revision RCR rate was 2.9% (1,096 patients) with a median time to revision of 23 months (IQR 12–52). Revision repair was more common in the arthroscopic group in comparison to the open group (3.2% vs 2.6%, NNT 166.7, p=0.004), with an adjusted HR of 0.72 (0.63–0.83 95% CI, p < 0 .0001). The surgical site infection rate was significantly higher in the open group compared with the arthroscopic group (0.5% vs 0.2%, NNT 333.3, p < 0 .001). Patient and provider covariates had no statistically significant effect on revision rates, aside from increasing age (per 10 year increase, HR 0.85, 0.81–0.90 95% CI, p < 0 .0001). Revision rotator cuff repair is approximately 30% more common in patients undergoing arthroscopic repair, in comparison to open repair, after adjustment. Surgical site infection is uncommon regardless of surgical technique, however, it is slightly more common following open repair. In the setting of an economic healthcare crisis, trends of increasing arthroscopic RCR may demand scrutiny, as the technique is associated with higher revision rates and higher costs

Despite reverse total shoulder arthroplasty (RTSA) being primarily indicated for massive rotator cuff tears, it is often possible to repair portions of the infraspinatus and subscapularis of patients undergoing this procedure. However, there is disagreement regarding whether these tissues should be repaired, as their effects remain unclear. Therefore, we investigated the effects of rotator cuff repair and changes in humeral and glenosphere lateralisation (HLat & GLat) on deltoid and joint loading. Six shoulders were tested on an in-vitro muscle driven active motion simulator. Cuff tear arthropathy was simulated in each specimen, which was then implanted with a custom adjustable RTSA fitted with a six axis load sensor. We assessed the effects of 4 RTSA configurations (i.e. all combinations of 0&10mm of HLat & GLat) on deltoid force, joint load, and joint load angle during abduction with/out rotator cuff repair. Deltoid and joint loads recorded by the load cell are reported as a % of Body Weight (%BW). Repeated measures ANOVAs and pairwise comparisons were performed with p<0.05 indicating significance. Cuff repair interacted with HLat & GLat (p=0.005, Fig. 1) such that with no HLat, GLat increased deltoid force without cuff repair (8.1±2.1%BW, p=0.012) and this effect was significantly increased with cuff repair (12.8±3.2%BW, p=0.010). However, adding HLat mitigated this such that differences were not significant. HLat and GLat affected deltoid force regardless of cuff status (−2.5±0.7%BW, p=0.016 & +7.7±2.3%BW, p=0.016, respectively). Rotator cuff repair did significantly increase joint load (+11.9±2.1%BW, p=0.002), as did GLat (+13.3±1.5%BW, p<0.001). The increases in deltoid and joint load caused by rotator cuff repair confirm that it acts as an adductor following RTSA and increases deltoid work. Additionally, cuff repair's negative effects are exacerbated by GLat, which strengthens its adduction affect, while Hlat increases the deltoid's abduction effect thus mitigating the cuff's antagonistic effects. Cuff repair increases concavity compression within the joint; however, Hlat produces a similar effect by wrapping the deltoid around the greater tuberosity – which redirects its force – and does so without increasing the magnitude of muscle and joint loading. The long-term effects of increased joint loading due to rotator cuff repair are unknown, however, it can be postulated that it may increase implant wear, and the risk of deltoid fatigue. Therefore, RTSA implant designs which improve joint compression without increasing muscle and joint loading may be preferable to rotator cuff repair

Purpose: Currently, there is little information available concerning the outcome of patients with infection following rotator cuff repair. Therefore, the purpose of this study was to review the incidence, management and outcomes of patients with rotator cuff repair complicated with deep infection. Methods: Between 1975 and 2003, 39 cases of deep infection following rotator cuff repair were identified. The medical records and radiographs were retrospectively examined. At a mean follow-up of 8.2 years, seven patients had died and two patients had been lost to follow-up leaving 30 cases for outcome evaluation. Results: The incidence of deep infection after rotator cuff repairs that were performed at our institution was 0.43% (21 of 4886 cases). The mean interval from rotator cuff repair to the time of infection diagnosis was 49 days. ESR and C-reactive protein were elevated in only 60% and 50% of patients, respectively. Propionibacterium was the most common organism isolated, infecting 51% of cases. A mean of 3.3 surgical debridements were necessary for the eradication of infection. At final follow-up, mean active abduction was 121° and mean external rotation was 44°. The ASES score averaged 67 points and the Simple Shoulder Test score averaged 7.3 points. Conclusions: The data from this study suggests that the eradication of deep infection following rotator cuff repair is possible, however, substantial functional limitations are not unusual. Additionally, the treating surgeon should be aware of the high incidence of Propionibacterium and the importance of allowing a minimum of seven days of culture to identify this organism

Aims. Despite recent advances in arthroscopic rotator cuff repair, re-tear rates remain high. New methods to improve healing rates following rotator cuff repair must be sought. Our primary objective was to determine if adjunctive bone marrow stimulation with channelling five to seven days prior to arthroscopic cuff repair would lead to higher Western Ontario Rotator Cuff (WORC) scores at 24 months postoperatively compared with no channelling. Methods. A prospective, randomized controlled trial was conducted in patients undergoing arthroscopic rotator cuff repair. Patients were randomized to receive either a percutaneous bone channelling of the rotator cuff footprint or a sham procedure under ultrasound guidance five to seven days prior to index surgery. Outcome measures included the WORC, American Shoulder and Elbow Surgeons (ASES), and Constant scores, strength, ultrasound-determined healing rates, and adverse events. Results. Overall, 94 patients were randomized to either bone channelling or a sham procedure. Statistically significant improvements in all clinical outcome scores occurred in both groups from preoperative to all timepoints (p < 0.001). Intention-to-treat analysis revealed no statistical differences in WORC scores between the two interventions at 24 months postoperatively (p = 0.690). No differences were observed in secondary outcomes at any timepoint and healing rates did not differ between groups (p = 0.186). Conclusion. Preoperative bone channelling one week prior to arthroscopic rotator cuff repair was not associated with significant improvements in WORC, ASES, Constant scores, strength, or ultrasound-determined healing rates. Cite this article: Bone Joint J 2021;103-B(1):123–130

Proximal humerus fractures are a common fragility fracture in older adults. A variety of treatment options exist, yet longer term outcomes of newer surgical treatments have not been extensively researched. Additionally, intermediate term outcomes following both surgical and non-surgical initial treatment of these injuries have not been evaluated at a population level. The purpose of this study was to utilise administrative data from Ontario, Canada to evaluate intermediate term outcomes following initial treatment of proximal humerus fractures. We used data from the Canadian Institute for Health Information to identify all patients aged 50 and older who presented to an ambulatory care facility with a “main diagnosis” of proximal humerus fracture from April 1, 2004 to March 31, 2013. Intervention codes from the Discharge Abstract Database were used to categorise patients into fixation, replacement, reduction or non-surgically treated groups. We used intervention codes to identify instances of complication-related operations following initial treatment (including fixation, replacement, hardware removal, rotator cuff repair and irrigation and debridement [I&D]) at one year post initial treatment. The majority of patients (28,369, 86.6%, 95% confidence interval [95% CI] 86.2–87.0%) were initially treated non-surgically, while 2835 (8.7%, 95% CI 8.4–9.0%) underwent initial fixation, 1280 (3.9%, 95% CI 3.7–4.1%) received primary joint replacement, and 276 (0.8%, 95% CI 0.8–1.0%) were initially treated with a reduction procedure. In the year following the initial treatment period, 127 (0.4%, 95%CI 0.4–0.5%) non-surgically treated patients underwent a replacement surgery, 292 (1.0%, 95%CI 0.9–1.2%) underwent fixation, and 12 (0.04%, 95% CI 0.02–0.07%) underwent a reduction procedure. Of the 2835 patients who received initial fixation, 57 (2.0%, 95% CI 1.6–2.6%) returned for a shoulder replacement, 80 received secondary fixation (2.8%, 95% CI 2.3–3.5%), 57 (2.0%, 95%CI 1.6–2.6%) underwent rotator cuff repair, 300 (10.6%, 95% CI 9.5–11.8%) had their implants removed, and 16 (0.6%, 95% CI 0.4–0.9%) returned for I&D. Of the 1280 patients who underwent initial replacement surgeries, 30 (2.3%, 95% CI 1.7–3.3%) returned for a secondary replacement, nine (0.7%, 95% CI 0.4–1.3%) underwent rotator cuff repair, and seven (0.6%, 95% CI 0.3–1.1%) had their implant removed. In the group who received initial reduction, eight (2.9%, 95% CI 1.5–5.6%) underwent a fixation procedure, six (2.2%, 95% CI 1.0–4.7%) received replacement surgeries, and five (1.8%, 95% CI 0.8–4.2%) each received rotator cuff repair and I&D in the year following initial treatment. The majority of proximal humerus fractures in patients 50 and older in Ontario, Canada are treated non-surgically. Complication-related operations in the year following initial non-operative treatment are relatively low. The most commonly observed procedure following initial fixation surgery is hardware removal

Introduction and aims: Good outcome for rotator cuff repair has been reported for open, arthroscopically assisted miniopen and arthroscopic techniques. Patient outcomes are affected by tear characteristics, patient factors and surgical experience. Little information is reported in literature on the affect on outcome in the presence of delamination tearing found at surgery. This prospective study compares outcome of miniopen rotator cuff repairs with and without delamination. Method: A prospective analysis between November 2004 and January 2008 allowed data collection on arthroscopically assisted miniopen rotator cuff repairs performed by a single surgeon using the same technique. The Western Ontario Rotator Cuff score (WORC) was used as the measurement tool to assess outcome. Scores were recorded pre-operatively and at 6 months, 12 months and 2 years post-operatively. Results: 229 arthroscopically assisted miniopen rotator cuff repairs were performed on 221 patients. Tear size and presence of delamination were recorded at the time of surgery. Incidence of delamination was 72%. The average age of patients was 58.6 years. There was no age difference in the incidence of delamination. Incidence of delamination was 72% in patients under 60 years (n=123) and 71% in patients over 60 years (106). 72% (of 62) female shoulders showed delamination and 71.5% (of 168) male shoulders showed delamination. Tears of less than 3cm had a 64% incidence of delamination. Tears greater than 3cm had 76% incidence of delamination. No difference in pre-operative WORC scores between delaminated group versus non-laminated group. Pre-operative WORC scores showed both delaminated and non-laminated tears had 40% of maximum score. Analysis at 2 years showed no difference in outcome of non-laminated tears (84% of maximum score) compared with delaminated tears (84% of maximum score). Size at time of repair did not affect outcome. Outcome showed slightly better results for delaminated tears in the older age group. Workers compensation patients achieved poorer outcomes than non workers compensation patients but there was no difference for delaminated versus non-laminated tears. Conclusions: Prospective analysis of outcome on arthroscopic assisted minideltoid rotator cuff repairs demonstrates that both non-laminated and delaminated rotator cuff tears achieve excellent outcomes at 2 years. There is no significant difference in outcome of repair when comparing workers compensation, size of tear or sex. Increasing age was a positive predictor for outcome at 6 and 12 months. It remains to be seen whether arthroscopic techniques can achieve similar results

Background. High re-rupture rates following repairs of rotator cuff tears (RCTs) have resulted in the increased use of repair grafts to act as temporary scaffolds to support tendon healing. It has been estimated that thousands of extracellular matrix repair grafts are used annually to augment surgical repair of rotator cuff tears. The only mechanical assessment of the suitability of these grafts for rotator cuff repair has been made using tensile testing only, and compared grafts to canine infraspinatus. As the shoulder and rotator cuff tendons are exposed to shearing as well as uniaxial loading, we compared the response of repair grafts and human rotator cuff tendons to shearing mechanical stress. We used a novel technique to study material deformation, dynamic shear analysis (DSA). Methods. The shear properties of four RCT repair grafts were measured (Restore, GraftJacket, Zimmer Collagen Repair and SportsMesh). 3mm-sized biopsy samples were taken and subjected to DSA using oscillatory deformation under compression to calculate the storage modulus (G') as an indicator of mechanical integrity. To assess how well the repair grafts were matched to normal rotator cuff tendons, the storage modulus was calculated for 18 human rotator cuff specimens which were obtained from patients aged between 22 and 89 years (mean age 58.8 years, with 9 males and 9 females). Control human rotator cuff tendons were obtained from the edge of tendons during hemiarthoplasties and stabilisations. A 1-way ANOVA of all of the groups was performed to compare shear properties between the different commercially available repair grafts and human rotator cuff tendons to see if they were different. Specific comparison between the different repair grafts and normal rotator cuff tendons was done using a Dunn's multiple comparison test. Results. We report a significant difference in the shear moduli of all four rotator cuff repair grafts (P<0.0001, 1 way ANOVA, Kruskall-Wallis test). 2 of the grafts, Zimmer Collagen Repair and SportMesh, were not significantly different when compared to rotator cuff tendons and were found to have comparable shear mechanical properties (P > 0.05, Dunn's multiple comparison test). The other repair grafts, GraftJacket and Restore, had a significantly lower storage modulus when compared to human rotator cuff tendons. Conclusions. With increasing numbers of repairs of rotator cuff tears, and augmentation of these repairs, there is a need to understand the mechanical and biological properties of the both repair grafts and the tendons they are designed to augment. At present there is no clear definition of the ideal mechanobiological properties of rotator cuff repair patches. Current rotator cuff repair grafts display a wide variation in their shear mechanical properties, and how closely they are matched to the mechanical properties of human rotator cuff tendons. It is hoped that this study may help to guide surgeons in deciding on the most appropriate rotator cuff tendon repair graft

Aims. The aim of this study was to characterize the relationship between pre- and postoperative opioid use among patients undergoing common elective orthopaedic procedures. Patients and Methods. Pre- and postoperative opioid use were studied among patients from a national insurance database undergoing seven common orthopaedic procedures using univariate log-rank tests and multivariate Cox proportional hazards analyses. Results. A total of 98 769 patients were included; 35 701 patients were opioid-naïve, 11 621 used opioids continuously for six months before surgery, and 4558 used opioids continuously for at least six months but did not obtain any prescriptions in the three months before surgery. Among opioid-naïve patients, between 0.76% and 4.53% used opioids chronically postoperatively. Among chronic preoperative users, between 42% and 62% ceased chronic opioids postoperatively. A three-month opioid-free period preoperatively led to a rate of cessation of chronic opioid use between 82% and 93%, as compared with between 31% and 50% with continuous preoperative use (p < 0.001 for significant changes in opioid use before and after surgery in each procedure). Between 5.6 and 20.0 preoperative chronic users ceased chronic use for every new chronic opioid user. Risk factors for chronic postoperative use included chronic preoperative opioid use (odds ratio (OR) 4.84 to 39.75; p < 0.0001) and depression (OR 1.14 to 1.55; p < 0.05 except total hip arthroplasty). With a three-month opioid-free period before surgery, chronic preoperative opioids elevated the risk of chronic opioid use only mildly, if at all (OR 0.47 to 1.75; p < 0.05 for total shoulder arthroplasty, rotator cuff repair, and carpal tunnel release). Conclusion. Chronic preoperative opioid use increases the risk of chronic postoperative use, but an opioid-free period before surgery decreases this risk compared with continuous preoperative use. Cite this article: Bone Joint J 2019;101-B:1570–1577

This randomized clinical trial utilizing the validated rotator cuff disease specific quality of life outcome measure (RC-QOL) and adequate power demonstrates no difference in outcome for full thickness rotator cuff tears comparing open to mini-open surgical techniques. The purpose of the study was to compare standard open rotator cuff repair versus mini-open rotator cuff repair by measuring the disease specific quality of life in patients with rotator cuff injury. This randomized clinical trial utilizing a validated disease specific outcome measure and adequate power demonstrates no difference in outcome for full thickness rotator cuff tears comparing open to mini-open surgical techniques. The miniopen approach utilizing an arthroscoic acromioplasty provides no additional beneifit to the patient undergoing a rotator cuff repair. The mean one year RC-QOL score for the open and mini-open groups were 85.3 (SD = 15.6) and 87.4 (SD = 12.0) out of a maximum of one hundred, respectively. This difference was not statistically significant (p = 0.572). Seventy-two patients (forty-eight males/twenty-four females) with an average age of 56.4 years (thirty-three to eighty-two years) consented to participate in the study. Inclusion criteria involved: unremitting pain, failed conservative treatment of at least three months, weakness of rotator cuff, and positive diagnostic imaging indicating a full-thickness rotator cuff tear. Massive rotator cuff tears were excluded. Prior to surgery, patients were randomized to either open or mini-open rotator cuff repair. Patients were assessed and outcomes were collected at three, six and twelve months after surgery. Primary Outcome Measure: Patient quality of life was quantified using the validated disease specific, reliable and responsive Rotator Cuff Quality of Life Questionnaire (RC-QOL) measured on a one hundred point visual analogue scale format. Secondary Outcomes: Range of motion, strength, American Shoulder and Elbow Surgeons Score, and the Shoulder Rating Questionnaire

This study aimed to quantify the relationship between passive tension of rotator cuff repair and arm position intraoperatively and to examine the effect of the passive tension on gap formation in cadaveric rotator cuff repairs. Five patients undergoing open surgical reconstruction of the rotator cuff were recruited. The operations were performed by a single surgeon using a standardised technique, which was acromioplasty, minimal debridement, mobilisation of tissue, bone troughs and transosseous suture tunnels. A Differential Variable Reluctance Transducer (DVRT) was placed at the apex of the debrided tendon. An in situ calibration was performed to relate the output from the DVRT to actual tension in the tendon. The tension generated was recorded as the supraspinatus tendon was advanced into a bone trough and secured. The relationship between arm position and repair tension was measured, by simultaneously collecting data from the DVRT and a calibrated goniometer. Particular attention was paid to the three standard positions of post-operative immobilisation; full adduction with internal rotation, neutral rotation with a 30° abduction wedge and ninety degrees of abduction. Five cadaveric shoulders were used for the creation of standardised rotator cuff tears which were then repaired using the technique described above. The difference in tension measured between full adduction and 30° abduction was statically applied for twenty four hours and the gap formation measured. Repair tension increased with advancement of the supraspinatus tendon into the bone trough. Abduction reduced the repair load, this was observed mainly in the first 30° of abduction. The mean reduction in load by 30° of abduction was 34 N. Twenty four hours of 34N static loading caused gap formation in each cadaveric rotator cuff repairs, the mean was 9.2 mm. Rotator cuff repairs tension can be reduced by postoperative immobilisation in 30° abduction. The change in tension with full adduction was caused gap formation in cadaveric rotator cuff repairs

Our primary objective was to compare healing rates in patients undergoing arthroscopic rotator cuff repair for degenerative tears, with and without bone channeling. Our secondary objectives were to compare disease-specific quality of life and patient reported outcomes as measured by the Western Ontario Rotator Cuff Index (WORC), American Shoulder and Elbow Surgeons (ASES) score and Constant score between groups. Patients undergoing arthroscopic rotator cuff repair at three sites were randomized to receive either bone channeling augmentation or standard repair. Healing rates were determined by ultrasound at 6 and 24 months post operatively. WORC, ASES, and Constant scores were compared between groups at baseline and at 3, 6, 12 and 24 months post operatively. One hundred sixty-eight patients were recruited and randomized between 2013 to 2018. Statistically significant improvements occurred in both groups from pre-operative to all time points in all clinical outcome scores (p < 0 .0001). Intention to treat analysis revealed no statistical differences in healing rates between the two interventions at 24 months post-operative. No differences were observed in WORC, ASES or Constant scores at any time-point. This trial did not demonstrate superiority of intra-operative bone channeling in rotator cuff repair surgery at 24 months post-operative. Healing rates and patient-reported function and quality of life measures were similar between groups

Summary Statement. Tendon-bone interface becomes matured with the perforating fiber and the cells striding over the bone area. We suggest that both “perforating fiber” and “cell stride” could play a crucial role in regeneration after rotator cuff repair. Introduction. To obtain a successful outcome after rotator cuff repair, repaired tendon requires to be anchored biologically to the bone. However, it is well known that the histological structure of the repaired tendon-bone insertion is totally different from the normal insertion. This morphological alteration may contribute to biological instability after surgical repair. To address these issues, it is fundamental to clarify the difference of the structure between the normal and the repaired insertion in detail. Surprisingly, few studies on the tendon-bone insertion using electron microscopy has been performed so far, since the insertion area is solid (bone/cartilage) and extremely limited for the analysis. Recently, a new scanning electron microscopical method (FIB/SEM tomography) has been developed, making it possible to analyze the wider area with the higher resolution and reconstruct 3D ultrastructures. The purpose of this study was to analyze the ultrastructure of the repaired supraspinatus tendon-bone insertion in rat using FIB/SEM tomography. Materials and Methods. Adult Sprague-Dawley rats underwent complete cuff tear and subsequent repair of the supraspinatus tendon. The repaired supraspinatus tendon-bone interface was evaluated at 2 and 4 weeks after surgery. At each time point, 6 shoulders were used for biomechanical testing (ultimate load-to-failure and linear stiffness), 3 shoulders for conventional histological analysis and 3 shoulders for the ultrastructural analysis. The supraspinatus tendon insertion of the age-matched adult SD rats was used as normal control. For statistical analysis, the Wilcoxon's rank sum test was used to compare load-to-failure and linear stiffness. Differences of P<0.05 were considered significant. Results. <Biomechanical testing> All shoulders failed at the tendon-bone interface. The ultimate load-to-failure and the linear stiffness were significantly greater at 8 weeks than at 4 weeks (p<0.05). Normal tendon-bone insertion: The normal supraspinatus insertion consists of four-layered structure: tendon, fibrocartilage, mineralised fibrocartilage and bone. Repaired tendon-bone interface. At week 2, the fibro-vascular tissue was intervened between the tendon and bone at the repaired site. At week 4, the fibro-vascular tissue became organised, and perforating fibers were partially observed. <Ultrastructure using FIB/SEM tomography> Normal tendon-bone insertion: The ultrastructure of the normal supraspinatus insertion was very smooth. The cells were located between collagen bundles and arranged with their cell processes parallel to the bundles. Repaired tendon-bone interface: At week 2, the cells in the fibro-vascular tissue were arranged irregularly. At week 4, a part of the cells became arranged regularly and participated in linkage between the fibro-vascular tissue and bone, striding their processes across the bone side. Apparent boundary separating the fibro-vascular tissue from bone was observed throughout the periods. Conclusion. At 4 weeks after surgery, the repaired supraspinatus insertion remains to be immature and biologically weak. At 8 weeks after the surgery, it becomes matured with the perforating fiber and the cells striding over the bone area. We therefore suggest that both “perforating fiber” and “cell stride” could play a crucial role in regeneration of the tendon-bone interface after rotator cuff repair

The purpose of the this survey study was twofold: 1) to examine different aspects of satisfaction with post-operative care in injured workers who have undergone rotator cuff surgery and 2) to examine the relationship between receiving a newly implemented summary report and the overall satisfaction with surgery and recovery. The clinical communication summary report was given to injured workers following their review assessment to share with the family doctor or other health care providers. The form indicated a need for further assessments or investigations and return to work recommendations. The study involved using a satisfaction survey that examined different aspects of follow-up visit and workers’ opinion about their understanding of the nature of surgery, their progress, clinical management, and usefulness of the newly implemented summery report. Eighty patients completed the questionnaire (mean age: 54 (8), 62(78%) males, of whom 26 (34%) had a rotator cuff decompression and 31 (40%) had a rotator cuff repair with 20 (26%) having both procedures and three missing data. There were no statistically significant relationships between the patient demographics (age, sex or type of surgery) and satisfaction. However, there was a significant correlation between how patients perceived the summary report in terms of helpfulness and the overall satisfaction with surgery (FTE<0.0004, p=0.001) and the satisfaction with recovery (FTE<0.0001, p=0.001). This may indicate that improvement in worker's understanding of their treatment recommendations and restrictions is associated with higher levels of overall satisfaction in this population. Our results indicate a positive linear relationship between expressing a high satisfaction and the helpfulness of the summary report. As part of improving care, adding a summary report may facilitate sharing information with the injured workers, their care providers and their workplace

Excessive postoperative opioid prescribing is a significant contributor to the opioid crisis. Prescribing in orthopaedic surgery is often further complicated by high use of opioid-based preoperative analgesia. ‘Opioid PrEscRiptions and usage After Surgery’ (OPERAS) is an international multicentre prospective student- and trainee-led collaborative study which aims to quantify the amount of opioids prescribed at discharge after common orthopaedic surgeries against what is consumed by patients at 7-days, and assess the impact of opioids on patient-reported outcomes. Data is being collected over 6 14-day periods on consecutive adult patients undergoing shoulder arthroplasty, rotator cuff repair, shoulder labral repair, anterior cruciate ligament repair, hip arthroplasty, and knee arthroplasty, with follow-up via telephone call at 7-days after discharge. The primary outcome is the proportion of oral morphine equivalents (OME) of prescribed opioids versus consumed opioids at 7-days post-discharge. This ongoing study is actively recruiting in over 20 countries. Globally, 65 centres are collecting orthopaedic, including 10 New Zealand centres and 17 Australian centres. To date, 284 orthopaedic patients have been prospectively enrolled with complete data (mean age 59.6 ± 16.7 years; 51.6% female). Overall, 77% and 89% of patients were prescribed opioids on discharge in New Zealand and Australia respectively. On average, 60% of prescribed opioids were consumed at 7-days post-discharge globally (150 OME (75-500) vs. 90 OME (15-200); p<0.01). In New Zealand and Australia, 42.1% (285 OME (150-584) vs. 120 OME (6-210); p<0.01) and 63.3% (150 OME (86-503) vs. 95 OME (28-221); p<0.01) of prescribed opioids were consumed at 7-days, respectively. OPERAS will provide the first high-quality global data on opioid prescription and consumption patterns with patient perspectives. These data can inform prescribing practice and inform guidelines. The growing interest in New Zealand and Australia in student- and trainee-led orthopaedic collaborative research, as evidenced by this study should be actively encouraged and fostered

Massive posterosuperior cuff tears (mRCT) retracted to the glenoid are surgically challenging and often associated with high retear rates. Primary repair is a less-favourable option and other salvage procedures such as SCR and tendon transfers are used. This study presents clinical and radiological outcomes of muscle advancement technique for repair of mRCT. Sixty-one patients (mean age 57±6, 77% males and 23% females) (66 shoulders) underwent all-arthroscopic rotator cuff repair that included supraspinatus and infraspinatus subperiosteal dissection off scapular bony fossae, lateral advancement of tendon laminae, and tension-free double-layer Lasso Loop repair to footprint. Pre-and post-operative range of motion (ROM), cuff strength, VAS, Constant, ASES, and UCLA scores were assessed. Radiologic assessment included modified Patte and Goutallier classifications. All patients had MRI at 6 months to evaluate healing and integrity of repair was assessed using Sugaya classification with Sugaya 4 and 5 considered retears. Advanced fatty degeneration (Goutallier 3-4) was present in 44% and 20% of supraspinatus and infraspinatus. Tendon retraction was to the level of or medial to glenoid in 22%, and just lateral in 66%. 50.8% mRCT extended to teres minor. Subscapularis was partially torn (Lafosse 1-3) in 46% and completely torn (Lafosse 4-5) in 20%. At mean follow-up (52.4 weeks), a significant increase in ROM, Relative Cuff Strength (from 57% to 90% compared to contralateral side), VAS (from 4 ±2.5 to 1±1.7), Constant (50±17.8 to 74 ±13.0), ASES (52 ±17.5 to 87 ±14.9), and UCLA (16± 4.9 to 30 ±4.9) scores were noted. There were six retears (10%), one failure due to P. acnes infection. 93% returned to pre-injury work and 89% of cases returned to pre-injury sport. Satisfaction rate was 96%. Muscle advancement technique for mRCT is a viable option with low retear rates, restoration of ROM, strength, and excellent functional outcomes

Though retear rates following rotator cuff repair are well established, we set out to review current literature to determine when early retears occurred (defined as <12m following surgery), and examine which pre- and post-operative variables might affect outcome. Pubmed, Medline, and CINAHL were searched for literature published from 2011 to 2021 using specific search terms. The inclusion criteria were studies reporting retear rates within 12 months of initial surgical repair. Exclusionary criteria were studies that included partial thickness tears, and studies that did not use imaging modalities within 12 months to assess for retears. PRISMA guidelines were followed, identifying a total of 10 papers. A combined total of 3372 shoulders included (Mean age 56 −67 years). The most common modality used to identify early retears were ultrasound scan and MRI. 6 of the 10 studies completed imaging at 0-3 months, 6 studies imaged at 3-6 months and 6 studies imaged at 6-12 months. Across all studies, there was a 17% early retear rate (574 patients). Of these, 13% occurred by 3 months, whilst the peak for retears occurred at 3-6 months (82%) and 5% occurred at 6-12 months. The risk of retear was higher in larger tears and extensive tendon degeneration. All studies apart from one documented a return to work/sport at 6 months post-operatively. Postoperative rehabilitation does not appear to alter retear rate, although data is limited with only 1 of 10 studies allowing active range of movement before 6 weeks. Retorn tendons had poorer functional outcomes compared to intact tendons at 12m following initial repair. The majority of early retears occur at 3-6 months and this time period should be prioritised both in rehabilitation protocols and future research. Age, tear size, and tendon degeneration were found to influence likelihood of early retears

It is undetermined which factors predict return to work following arthroscopic rotator cuff repair. We aimed to identify which factors predicted return to work at any level, and return to pre-injury levels of work 6 months post-arthroscopic rotator cuff repair. Multiple logistic regression analysis of prospectively collected demographic, pre-injury, preoperative, and intraoperative data from 1502 consecutive primary arthroscopic rotator cuff repairs, performed by a single surgeon, was performed to identify independent predictors of return to work, and return to pre-injury levels of work respectively, 6 months post-surgery. Six months post-rotator cuff repair, 76% of patients returned to work (RTW), and 40% returned to pre-injury levels of work (Full-RTW). RTW at 6 months was likely if patients were still working after their injuries, but prior to surgery (Wald statistic [W]=55, p<0.0001), were stronger in internal rotation preoperatively (W=8, p=0.004), had full-thickness tears (W=9, p=0.002), and were female (W=5, p=0.030). Patients who achieved Full-RTW were likely to have worked less strenuously pre-injury (W=173, p<0.0001), worked more strenuously post-injury but pre-surgery (W=22, p<0.0001), had greater behind-the-back lift-off strength preoperatively (W=8, p=0.004), and had less passive external rotation range of motion preoperatively (W=5, p=0.034). Patients who were still working post-injury, but pre-surgery were 1.6-times more likely to RTW than patients who were not (p<0.0001). Patients who nominated their pre-injury level of work as “light” were 11-times more likely to achieve Full-RTW than those who nominated “strenuous” (p<0.0001). Six months post-rotator cuff repair, a higher patient-rated post-injury, but pre-surgery level of work was the strongest predictor of RTW. A lower patient-rated pre-injury level of work was the strongest predictor of Full-RTW. Greater preoperative subscapularis strength independently predicted both RTW, and Full-RTW

Objective: There is no non-invasive gold standard for measuring gap formation following rotator cuff repair; re-tears are reported both on MRI and Ultrasound. We present a novel RSA technique using a combination of 1mm tantalum beads and metal sutures to allow monitoring of gap formation following rotator cuff repair. Methodology: We carried out ten open rotator cuff repairs with using trans-osseous sutures on patients with moderate to massive tears. During surgery RSA markers were inserted into the shoulder to allow postoperative monitoring of the repair. These markers took the form of 1mm RSA tantalum beads in the greater tuberosity, distal to the repair site, and three metal sutures in tendon, proximal to the repair site. Direct measurements of the distance between the markers each side of the repair were taken intra-operatively (T=O). RSA images were taken of the repair immediately postoperatively (T=1–2 hours), day 3, 2 weeks, 3 months and 1 year post-operatively. Ultrasound imaging was performed at the same intervals by consultant musculo-skeletal radiologists blinded to the RSA data. Results: At the 3 month stage post-operatively RSA data shows an increase in the average gap between the 2 sets of markers, with considerable variation between patients (5mm to 19mm). Conclusion: The results are highly suggestive of gap formation in the repair. The greatest increase in gap formation has been seen between 2 weeks and 3 months. During this time patients come out of their abduction arm sling and commence physiotherapy. It may be that due to excessive loading on the repair before it has fully healed has causes failure in some cases

Secure tendon-to-bone fixation is essential for successful rotator cuff repair. Thus, the biomechanical properties of devices used in rotator cuff repair should be better understood. This controlled laboratory study was performed to evaluate response to incremental cyclic loading of six different anchor-wire complexes commonly used in rotator cuff repair. Two absorbable anchors 5 and 6.5 mm in diameter and one metallic anchor, coupled with both ethibond or fibrewire (FW) were tested on five pairs of fresh-frozen human cadaveric shoulders. An incremental cyclic load was applied until failure using a Zwich-Roell Z010 electromechanical testing machine. The ultimate failure load and mode of failure were recorded. A t-test was used for statistical analysis. The FW suture coupled both with absorbable and metallic anchors provides a statistically significant stronger fixation. However, while the metallic anchors in most cases fail due to the slippage of the anchor, absorbable anchors fail due to rupture of the loop. The FW seems to increase the strength of fixation devices under cyclic load both using absorbable or metallic anchors with relevant differences in failure mode (slippage of the metallic anchor and loop failure in absorbable ones). Using a FW suture, the risk of metallic anchor migration might increase

We performed a prospective cohort study to investigate the comparability of subjective and objective assessment scores of shoulder function following surgery for rotator cuff pathology. A consecutive series of 372 patients underwent surgery for rotator cuff disorders with post-operative follow up over 24 months. 248 patients only had subacromial decompression, whereas 124 patients had rotator cuff repair additionally (93 arthroscopic; 31 open). Assessments were made pre-operatively, and at 3, 6, 12, and 24 months post-operatively using the Disabilities of the Arm, Shoulder, and Hand (DASH) score; Oxford Shoulder Questionnaire (OSQ); and the Constant score, which was used as a reference. Standardisation calculations were performed to convert all scores into a 0 to 100 scale, with 100 representing a normal shoulder. The student’s t test was used to compare the mean score for each subjective tool (DASH and OSQ) with the objective score (Constant) at each time point. Pearson’s Correlation coefficient was used to analyse the changes with time post-operatively. The statistical tests were used for the individual surgery types as well as all surgeries collectively. The relationship between the DASH and the Constant score was strongly correlated in all types of surgery. The relationship between the Oxford and Constant scores was similar, except in the open rotator cuff repair group. There was no statistical difference between the mean DASH and Constant scores for all interventions at any time point. A significant difference was seen between the mean Oxford and Constant scores for at least one time point in all but the open rotator cuff repair group. We demonstrate that the DASH and Oxford scoring systems would be useful substitutes for the Constant score, eliminating the need for a trained investigator and specialist equipment required to perform the Constant score with the associated cost benefits

Purpose of the study: Many rotator cuff tears occur in the context of a work accident or an occupational disease (schedule 57-A in the French occupational disease nomenclature). This context is a negative factor for outcome although diverse opinions are expressed in the literature. We wanted to study the occupational outcome of operated patients after rotator cuff repairs and to determine what factors affect this outcome. Material and method: From 2000 to 2005, 1155 patients underwent rotator cuff repair performed by the same operator. The context was an occupational context (schedule 57-A) in one quarter of these patients (n=290, 25.1%). Among these, 87.6% (n=254) responded to a mail questionnaire. In all 262 shoulders were included in this series (8 bilateral cases). Male gender predominated (72%) and 69% of the tears were in the right shoulder. Mean patient age was 50.53±6.4 years. In this series, 67% of the tears were related to a work accident and 33% to an occupational disease. The patients were salaried workers (75.2%), independent craftsmen (12.6%), and civil servants (11.8%). The occupational category was heavy manual labour (68.3%), light manual labour (25.5%), non manual occupation (6.1%). The injury involved one tendon in 64.1%, two tendons in 28.2% and three tendons in 7.6%. Classical open repair was performed for 70.6%), mini-open repair for 9.2%, and arthroscopic repair for 20.2%. Results: Patients resumed their occupational activity in 59.64% of the cases (mean age 48±0.8 years); 40.45% did not resume their occupational activity (mean age 54±5.3 years). Excepting cases of retirement or interruption related to another medical condition, the shoulder was the reason for not resuming work in 16% of patients. Young age (p=0.0005) and type of surgery (open procedure p=0.0004) were factors favouring resumption of occupational activity while gender, occupational category and type of injury had no effect. The duration of sick leave (full time) depended on the occupational category (p=0.004) and somewhat on gender, age, occupational situation, work accident or occupational disease, and type of surgery/. Conclusion: Work accidents or occupational disease were not synonymous with failure of rotator cuff repair. Age was the leading prognostic factor

There is no non-invasive gold standard for measuring gap formation following rotator cuff repair; re-tears are reported both on MRI and Ultrasound. Roentgen Stereophotogrammetric Analysis (RSA) has previously been used to monitor microscopic migration of markers in rigid bodies. We present a novel RSA technique using a combination of 1mm tantalum beads and metal sutures to allow accurate monitoring of gap formation following rotator cuff repair. The RSA system combines a commercially made calibration cage with software developed at Imperial College. We verified the RSA system by analysing a movable glass phantom and comparing the data with precise physical measurements of the same object: it identified a 2mm distraction of the phantom to within 0.05mm. In vitro work involved cadaveric human shoulders. We placed three 1mm RSA tantalum beads in the greater tuberosity and three metal sutures in supraspinatus tendon. We then created a tear in supraspinatus at its insertion into the greater tuberosity. We were able to show that RSA images taken before and after the tear correlated closely with direct measurements. The processed data demonstrated movement associated with gap formation. We have performed two open rotator cuff repairs using trans-osseous sutures. During surgery RSA markers were inserted into the shoulder to allow post-operative monitoring of the repair (guided by the in vitro work). Direct measurements of the distance between markers each side of the repair were taken intra-operatively (T=O). RSA images were taken immediately post-operatively (T=1 hours), day 3, day 14, and day 84. The RSA data suggests gapping of typically 3mm may have occurred at the repair sites in both patients. Ultrasound imaging was performed at the same intervals by consultant musculoskeletal radiologists blinded to the RSA data. Preliminary results correlating the two modalities suggest that ultrasound can visualise gap formation accurately even immediately post-operatively

Aim: To study the long term results of rotator cuff repair in patients over the age of 65. Introduction: Although some patients with rotator cuff tears are asymptomatic, the majority have a combination of pain, weakness and restricted function. Whilst this affects the lifestyle of all patients, in the elderly these symptoms can make the difference between independent living and the need for assistance or sheltered accommodation. Method: The present study has looked at a consecutive series of 24 patients all of them over 65 years, who underwent rotator cuff surgery between 1993 and 1997. Outcome has been assessed using two validated scoring systems – the Oxford Shoulder Score (OSS) and the DASH questionnaire. All patients had an open subacromial decompression of their shoulders at the time of cuff repair. Two patients could not be contacted for follow up and were therefore excluded. One patient who had a hemiarthroplasty of the shoulder 3 years after rotator cuff repair was excluded as well. The average follow up period was 6 years (range 4.5 – 9 years). The Oxford Shoulder Score revealed that 72% had good to excellent results, 16% remained unchanged and 12% were worse than prior to surgery. The corresponding DASH scores were 28% excellent, 40% good, 16% fair and 16% poor respectively. In addition 81% of patients were independent with daily activities, with 48% of them living alone and the remaining 33% living with their partners. Only 19% of patients needed significant help with their activities of daily living. These results were irrespective of whether surgery was performed on the dominant or non-dominant shoulder. Conclusion: We would suggest that age itself should not be considered a contraindication to rotator cuff repair

Introduction: Structural failure of a rotator cuff repair, if associated with pain and severe dysfunction, represents a treatment challenge. Depending on the size of the retear ,the degree of fatty degeneration of the involved muscles, retraction of the musculotendinous unit, as well as age and activity level of the patient, treatment options include re-repair, re-repair with tendon transfer, glenohumeral arthrodesis and inverse total shoulder (Delta) prosthesis. The purpose of this study was to review the outcome of treatment of failed rotator cuff repairs and to compare the results of the four most important types of treatments. Material and methods: From 1991 till 2002, we retrospectively analysed 80 patients, who underwent revision surgery of the shoulder after failed primary cuff repair. Out of them, 33 had a rerepair, 15 were treated with a delta prosthesis, 17 with a latissimus dorsi-and 15 with a pectoralis major-transfer. Data assessment included pre- and postoperative Constant Score and complication rate. Average follow-up time was 51 months. Results: After rerepair of the rotator cuff, patients showed a significant gain in subjective shoulder value, rel. Constant Score and reduction of pain(p< 0.05), but range of motion and strength remained unchandged. After additional latissimus-dorsi-or pectoralis major-transfer no significant gain was seen in either subjective shoulder value, nor rel. Constant Score. After Implantation of delta prosthesis, significant improvement was seen in subjective shoulder value, relative Constant score, range of motion and strength (p< 0.05). These improvements were significantly better than in the other groups (p< 0.05). Complication rate was the highest in the delta group. Conclusion: After failed rotator cuff repair, attempts of rerepair allow good subjective results by reducing pain and maintaining range of motion. Although range of motion is maintained after additional latissimus dorsi-and pectoralis major-transfer, subjective and objective results are not satisfying. After implantation of a delta prosthesis, very good subjective and objective outcome can be predicted, although results are slightly compromised by the high complication rate

Restoring of anatomic footprint may improve the healing and mechanical strength of repaired tendons. A double row of suture anchors increases the tendon-bone contact area, reconstituting a more anatomic configuration of the rotator cuff footprint. We aimed to investigate if there were differences in clinical and imaging outcome between single row and double row suture anchor technique repairs of rotator cuff tears. We recruited 60 patients affected by a rotator cuff tear diagnosed on clinical grounds, magnetic resonance imaging evidence of cuff tear and inadequate response to nonoperative management, an unretracted and sufficiently mobile full-thickness rotator cuff lesion to allow a double row repair found at the time of surgery. In 30 patients, rotator cuff repair was performed with single row suture anchor technique (Group 1). In the other 30 patients, rotator cuff repair was performed with double row suture anchor technique (Group 2). 8 patients (4 in the single row anchor repair group and 4 in the double row anchor repair group) were lost at follow up. A modified UCLA shoulder rating scale was used to evaluate preoperative and postoperative shoulder pain, function and range of motion, strength and patient satisfaction. All patients received a post-operative MR arthrography at the final follow up appointment. At the 2 year follow-up, no statistically significant differences were seen with respect to the UCLA score and ROM values. Post-operative MR arthrography at 2 years of follow up in group 1 showed intact tendons in 14 patients, partial thickness defects in 10 patients and full thickness defects in 2 patients. In group 2, MR arthrography showed an intact rotator cuff in 18 patients, partial thickness defects in 7 patients, and full thickness defects in 1 patient. Biomechanical studies comparing single versus double row suture anchor technique for rotator cuff repair show that a double row of suture anchors increases the tendonbone contact area and restores the anatomic rotator cuff footprint, providing a better environment for tendon healing. Our study shows that there are no advantages in using a double row suture anchor technique to restore the anatomical footprint. The mechanical advantages evidenced in cadaveric studies do not translate into superior clinical performance when compared with the more traditionally, technically less demanding, and economically more advantageous technique of single row suture anchor repair

Adequate visual clarity is paramount to performing arthroscopic shoulder surgery safely, efficiently, and effectively. The addition of epinephrine in irrigation fluid, and the intravenous or local administration of tranexamic acid (TXA) have independently been reported to decrease bleeding thereby improving the surgeon's visualization during arthroscopic shoulder procedures. No study has compared the effect of systemic administered TXA, epinephrine added in the irrigation fluid or the combination of both TXA and epinephrine on visual clarity during shoulder arthroscopy with a placebo group. The purpose of this study is to determine if intravenous TXA is a safe alternative to epinephrine delivered by a pressure-controlled pump in improving arthroscopic shoulder visualization during arthroscopic procedures and whether using both TXA and epinephrine together has an additive effect in improving visualization. The design of the study was a double-blinded, randomized controlled trial with four 1:1:1:1 parallel groups conducted at one center. Patients aged ≥18 years undergoing arthroscopic shoulder procedures including rotator cuff repair, arthroscopic biceps tenotomy/tenodesis, distal clavicle excision, subacromial decompression and labral repair by five fellowship-trained upper extremity surgeons were randomized into one of four arms: Pressure pump-controlled regular saline irrigation fluid (control), epinephrine (1ml of 1:1000) mixed in irrigation fluid (EPI), 1g intravenous TXA (TXA), and epinephrine and TXA (EPI/TXA). Visualization was rated on a 4-point Likert scale every 15 minutes with 0 indicating ‘poor’ quality and 3 indicating ‘excellent’ quality. The primary outcome measure was the unweighted mean of these ratings. Secondary outcomes included mean arterial blood pressure (MAP), surgery duration, surgery complexity, and adverse events within the first postoperative week. One hundred and twenty-eight participants with a mean age (± SD) of 56 (± 11) years were randomized. Mean visualization quality for the control, TXA, EPI, and EPI/TXA groups were 2.1 (±0.40), 2.1 (±0.52), 2.6 (±0.37), 2.6 (±0.35), respectively. In a regression model with visual quality as the dependent variable, the presence/absence of EPI was the most significant predictor of visualization quality (R=0.525; p < 0 .001). TXA presence/absence had no effect, and there was no interaction between TXA and EPI. The addition of MAP and surgery duration strengthened the model (R=0.529; p < 0 .001). Increased MAP and surgery duration were both associated with decreased visualization quality. When surgery duration was controlled, surgery complexity was not a significant predictor of visualization quality. No adverse events were recorded in any of the groups. Intravenous administration of TXA is not an effective alternative to epinephrine in the irrigation fluid to improve visualization during routine arthroscopic shoulder surgeries although its application is safe. There is no additional improvement in visualization when TXA is used in combination with epinephrine beyond the effect of epinephrine alone

Adequate visual clarity is paramount to performing arthroscopic shoulder surgery safely, efficiently, and effectively. The addition of epinephrine in irrigation fluid, and the intravenous or local administration of tranexamic acid (TXA) have independently been reported to decrease bleeding thereby improving the surgeon's visualization during arthroscopic shoulder procedures. No study has compared the effect of systemic administered TXA, epinephrine added in the irrigation fluid or the combination of both TXA and epinephrine on visual clarity during shoulder arthroscopy with a placebo group. The purpose of this study is to determine if intravenous TXA is a safe alternative to epinephrine delivered by a pressure-controlled pump in improving arthroscopic shoulder visualization during arthroscopic procedures and whether using both TXA and epinephrine together has an additive effect in improving visualization. The design of the study was a double-blinded, randomized controlled trial with four 1:1:1:1 parallel groups conducted at one center. Patients aged ≥18 years undergoing arthroscopic shoulder procedures including rotator cuff repair, arthroscopic biceps tenotomy/tenodesis, distal clavicle excision, subacromial decompression and labral repair by five fellowship-trained upper extremity surgeons were randomized into one of four arms: Pressure pump-controlled regular saline irrigation fluid (control), epinephrine (1ml of 1:1000) mixed in irrigation fluid (EPI), 1g intravenous TXA (TXA), and epinephrine and TXA (EPI/TXA). Visualization was rated on a 4-point Likert scale every 15 minutes with 0 indicating ‘poor’ quality and 3 indicating ‘excellent’ quality. The primary outcome measure was the unweighted mean of these ratings. Secondary outcomes included mean arterial blood pressure (MAP), surgery duration, surgery complexity, and adverse events within the first postoperative week. One hundred and twenty-eight participants with a mean age (± SD) of 56 (± 11) years were randomized. Mean visualization quality for the control, TXA, EPI, and EPI/TXA groups were 2.1 (±0.40), 2.1 (±0.52), 2.6 (±0.37), 2.6 (±0.35), respectively. In a regression model with visual quality as the dependent variable, the presence/absence of EPI was the most significant predictor of visualization quality (R=0.525; p < 0 .001). TXA presence/absence had no effect, and there was no interaction between TXA and EPI. The addition of MAP and surgery duration strengthened the model (R=0.529; p < 0 .001). Increased MAP and surgery duration were both associated with decreased visualization quality. When surgery duration was controlled, surgery complexity was not a significant predictor of visualization quality. No adverse events were recorded in any of the groups. Intravenous administration of TXA is not an effective alternative to epinephrine in the irrigation fluid to improve visualization during routine arthroscopic shoulder surgeries although its application is safe. There is no additional improvement in visualization when TXA is used in combination with epinephrine beyond the effect of epinephrine alone