Aims

The aim of this study was to compare outcomes after growth-friendly treatment for early-onset scoliosis (EOS) between patients with skeletal dysplasias versus those with other syndromes.

Background

Disability and slow return to sport and work after tendon rupture are major challenges. Platelet Rich Plasma (PRP) is an autologous supraphysiological concentration of platelets from whole blood that has demonstrated positive cellular and physiological effects on healing in laboratory conditions but evidence from adequately powered robust clinical trials is lacking. We aimed to determine the clinical efficacy of PRP for treatment of acute Achilles tendon rupture.

Introduction

Management of deformity involving limb length discrepancy (LLD) using intramedullary devices offers significant benefits to both patients and clinicians over traditional external fixation. Following the withdrawal of the PRECICE nail, the Fitbone became the primary implant available for intramedullary lengthening and deformity correction within our service. This consecutive series illustrates the advantages and complications associated with the use of this device, and describes a novel technique modification for antegrade intramedullary lengthening nails.

In 2021 the bone grafting market was worth €2.72 billion globally. As allograft bone has a limited supply and risk of disease transmission, the demand for synthetic grafting substitutes (BGS) continues to grow while allograft bone grafts steadily decrease. Synthetic BGS are low in mechanical strength and bioactivity, inspiring the development of novel grafting materials, a traditionally laborious and expensive process. Here a novel BGS derived from sustainably grown coral was evaluated. Coral-derived scaffolds are a natural calcium carbonate bio-ceramic, which induces osteogenesis in bone marrow mesenchymal stem cells (MSCs), the cells responsible for maintaining bone homeostasis and orchestrating fracture repair. By 3D printing MSCs in coral-laden bioinks we utilise high throughput (HT) fabrication and evaluation of osteogenesis, overcoming the limitations of traditional screening methods.

MSC and coral-laden GelXA (CELLINK) bioinks were 3D printed in square bottom 96 well plates using a CELLINK BIO X printer with pneumatic adapter Samples were non-destructively monitored during the culture period, evaluating both the sample and the culture media for metabolism (PrestoBlue), cytotoxicity (lactose dehydrogenase (LDH)) and osteogenic differentiation (alkaline phosphatase (ALP)). Endpoint, destructive assays used included qRT-PCR and SEM imaging.

The inclusion of coral in the printed bioink was biocompatable with the MSCs, as reflected by maintained metabolism and low LDH release. The inclusion of coral induced osteogenic differentiation in the MSCs as seen by ALP secretion and increased RUNX2, collagen I and osteocalcin transcription.

Sustainably grown coral was successfully incorporated into bioinks, reproducibly 3D printed, non-destructively monitored throughout culture and induced osteogenic differentiation in MSCs. This HT fabrication and monitoring workflow offers a faster, less labour-intensive system for the translation of bone substitute materials to clinic.

Acknowledgements: This work was co-funded by Enterprise Ireland and Zoan Biomed through Innovation Partnership IP20221024.

Children with osteogenesis imperfecta (OI) frequently present with coxa vara (CV). Skeletal fragility, severe deformity and limited fixation options make this a challenging condition to correct surgically. Our study aimed to determine the efficacy of the Fassier technique to correct CV and determine the complication rate.

Retrospective, descriptive case series from a tertiary hospital. We retrospectively reviewed records of a cohort of eight children (four females, 12 hips) with OI (6/8 Sillence type III, 2/8 type IV) who had surgical treatment with Fassier technique for CV between 2014 and 2020.

Inclusion Criteria: All patients with CV secondary to OI treated surgically with Fassier technique.

Exclusion Criteria: Patients older than 18 years; Patients with CV treated non-operatively or by surgical technique different to Fassier technique.

Data relating to the following parameters was collected and analyzed: demographic data, pre- and postoperative neck shaft angle (NSA), complications and NSA at final follow-up.

The mean age at operation was 5.8 years (range 2–10). The mean NSA was corrected from 96.8° preoperatively to 137º postoperatively. At a mean follow-up of 38.6 months, the mean NSA was maintained at 133°, and 83% (10/12) of hips had an NSA that remained greater than 120°. There was a 42% (5/12) complication rate: three Fassier–Duval rods failed to expand after distal epiphyseal fixation was lost during growth; one Rush rod migrated through the lateral proximal femur cortex with recurrent coxa vara; and one Rush rod migrated proximally and required rod revision.

The Fassier technique effectively corrected CV in children with moderate and progressively deforming OI. The deformity correction was maintained in the short term. The complication rate was high, but mainly related to the failed expansion of the Fassier–Duval rods.

Abstract

Abstract

The Montgomery ruling advocates patients be informed of ‘material risks’ of a procedure. With no guidelines for patients wishing to return to high activity levels after knee arthroplasty, we explore patient and surgeon perceptions in climbers.

Ethical approval was granted by the University of Central Lancashire. Anonymous questionnaires were sent via email and social media to consultant knee arthroplasty surgeons and to climbers/mountaineers across the UK. Consultants were asked about advice given for patients who participate in climbing. Climbers were asked about their experiences of knee arthroplasty and return to activity.

Of 33 knee arthroplasty surgeons, 11(33%) were firmly against any return to climbing, 10(30%) counselled against it, and 12(36%) were open to return to previous activity. Of 11(33%) surgeons who do not gather information about levels of climbing, 8 would not provide specific advice regarding risks of returning to sport. Of 28 climbers, only 5(18%) were informed to cease completely, with 11(39%) cautioned against and 12(43%) permitted to return. There was no correlation between the advice received and climbing ability post-operatively, (kappa=0.143,p=0.058), with a substantial agreement between ability 1-year post-operatively and currently, (kappa=0.689,p<0.001).

There is a discrepancy between the advice given and received by climbers/mountaineers prior to knee arthroplasty, with ability post-operatively having no relationship to advice given. Climbing is possible at high level with no reported complications following knee arthroplasty. The 1-year time point is predictive of longer-term outcome. This information should help surgeons better inform their patients preoperatively.

Femoral stem design affects periprosthetic bone mineral density (BMD), which may impact long term survival of cementless implants in total hip arthroplasty (THA). The aim of this study was to examine proximal femoral BMD in three morphologically different uncemented femoral stems designs to investigate whether one particular design resulted in improved preservation of BMD.

119 patients were randomized to receive either a proximally coated dual taper wedge stem, a proximally coated anatomic stem or a fully coated collarless triple tapered stem. Dual energy x-ray absorptiometry scans (Lunar iDXA, GE Healthcare, Madison, WI) assessed BMD across the seven Gruen zones pre-operatively, and post-operatively at 6-weeks, 1-year, and 2-years comparing the unoperated contralateral femur as a control.

BMD increased in zones one (2.5%), two (17.1%), three (13.0%), five (10%) and six (17.9%) for all stems. Greater preservation of BMD was measured on the lateral cortex (zone 2) for both the dual taper wedge and anatomic stems (p = 0.019). The dual taper wedge stem also demonstrated preservation of BMD in the medial calcar (zone 7) whilst the anatomic and triple taper stem declined in this region, however this was not statistically significant (p = 0.059). BMD decreased on average by 2.1% in the mid-diaphysis region, distal to the stem tip (zone 4) for all implants. All stems performed equivalently at final follow-up in all patient reported outcome measures.

Implant design was shown to impact BMD changes. All stems preserved bone at the metaphyseal level in early follow-up, which theoretically indicates favorable implant fixation. There was no significant stress shielding observed, however longer follow-up is required to elucidate the impact of this finding on implant survivorship.

Climbers and mountaineers will present to arthroplasty surgeons in need of hip replacement surgeries. There is a lack of guidance for both parties with a paucity in the literature. Climbing is often considered a high-risk activity to perform with a total hip replacement, due to the positions the hip is weighted in, and the potential austere environment in which an injury may occur.

The aim was to assess levels of climbing and mountaineering possible following hip arthroplasty, and any factors affecting these levels.

Ethical approval was obtained from the University of Central Lancashire. An anonymous online questionnaire was disseminated via email, social media and word-of-mouth to include all climbers, hill-walkers or mountaineers across the UK. This was used to collect climbing and mountaineering ability at various timepoints, along with scores such as the Oxford Hip Score and UCLA Score. The Kappa statistic was used to assess for correlations.

Of the responders, 28 had undergone right hip arthroplasty surgery, with 11 having left hips and 22 receiving bilateral hips. A total of 67 of the replaced hips were total hip replacements, with 16 having undergone hip resurfacing. There is a fair agreement in level of climbing ability 3 months pre- and 3 months post-operatively (kappa=0.287, p<0.001), and a substantial agreement between 1 year post-operatively and currently for both climbing (kappa=0.730, p<0.001) and mountaineering (kappa=0.684, p<0.001). Impressively, 17 participants are climbing at more than E1 trad or 6c sport at one or more time points post operatively, which is regarded as an advanced level within the climbing community. Out of those 17 participants, 8 were climbing at this level within 3 months post-operatively.

The level of climbing possible following hip arthroplasty surgery is above what is expected and perhaps desired by the operating surgeon. It is essential to take the individual patient into account when planning an operative intervention such as arthroplasty. The one year post-operative time point is highly predictive of longer term outcomes for both climbing and mountaineering.

Introduction

Circular external fixators are fundamental to lower limb reconstruction, primarily in situations with a high risk of infection such as open fractures. During the Covid-19 pandemic, use of circular frames in our unit decreased, following departmental approval, due to resource management and in keeping with BOA guidelines as we opted to “consider alternative techniques for patients who require soft tissue reconstruction to avoid multiple operations”. These alternatives included the use of internal fixation (plate osteosynthesis and intramedullary nailing) as a measure to reduce the number of hospital attendances for patients and to conserve resources. This change in practice has continued in part following the pandemic with the increased use of internal fixation in cases previously deemed unsuitable for such techniques. We present our experience of this treatment strategy in the management of complex lower limb injuries, focusing on outcomes and consider the lessons learnt.

Autologous cancellous bone graft is the gold standard in large bone defect repair. However, studies using autologous bone grafting in rats are rare and donor sites as well as harvesting techniques vary. The aim of this study was to determine the feasibility of autologous cancellous bone graft harvest from 5 different anatomical sites in rats and compare their suitability as donor sites for autologous bone graft.

13 freshly euthanised rats were used to describe the surgical approaches for autologous bone graft harvest from the humerus, iliac crest, femur, tibia and tail vertebrae (n=4), determine the cancellous bone volume and microstructure of those five donor sites using µCT (n=5), and compare their cancellous bone collected qualitatively by looking at cell outgrowth and osteogenic differentiation using an ALP assay and Alizarin Red S staining (n=4).

It was feasible to harvest cancellous bone graft from all 5 anatomical sites with the humerus and tail being more surgically challenging. The microstructural analysis showed a significantly lower bone volume fraction, bone mineral density, and trabecular thickness of the humerus and iliac crest compared to the femur, tibia, and tail vertebrae. The harvested volume did not differ between the donor sites. All donor sites apart from the femur yielded primary osteogenic cells confirmed by the presence of ALP and Alizarin Red S stain. Bone samples from the iliac crest showed the most consistent outgrowth of osteoprogenitor cells.

The tibia and iliac crest may be the most favourable donor sites considering the surgical approach. However, due to the differences in microstructure of the cancellous bone and the consistency of outgrowth of osteoprogenitor cells, the donor sites may have different healing properties, that need further investigation in an in vivo study.

Variations in component positioning of total hip replacements can lead to edge loading of the liner, and potentially affect device longevity. These effects are evaluated using ISO 14242:4 edge loading test results in a dynamic system. Mediolateral translation of one of the components during testing is caused by a compressed spring, and therefore the kinematics will depend on the spring stiffness and damping coefficient, and the mass of the translating component and fixture. This study aims to describe the sensitivity of the liner plastic strain to these variables, to better understand how tests using different simulator designs might produce different amounts of liner rim deformation.

A dynamic explicit deformable finite element model with 36mm Pinnacle metal-on-polyethylene bearing geometry (DePuy Synthes, Leeds, UK) was used with material properties for conventional UHMWPE. Setup was 65° clinical inclination, 4mm mismatch, 70N swing phase load, and 100N/mm spring. Fixture mass was varied from 0.5-5kg, spring damping coefficient was varied from 0-2Ns/mm. They were changed independently, and in combination.

Maximum separation values were relatively insensitive to changes in the mass, damping coefficient, or both. The sensitivity of peak plastic strain, to this range of inputs, was similar to changing the swing phase load from 70N to approximately 150N – 200N. Increasing the fixture mass and/or damping coefficient increased the peak plastic strain, with values from 0.15-0.19.

Liner plastic deformation was sensitive to the spring damping and fixture mass, which may explain some of the differences in fatigue and deformation results in UHMWPE liners tested on different machines or with modified fixtures. These values should be described when reporting the results of ISO14242:4 testing.

Acknowledgements

Funded by EPSRC grant EP/N02480X/1; CAD supplied by DePuy Synthes.

Femoral stem design affects periprosthetic bone mineral density (BMD), which may impact long term survival of cementless implants in total hip arthroplasty (THA). The aim of this study was to examine proximal femoral BMD in three morphologically different uncemented femoral stems designs to investigate whether one particular design resulted in improved preservation of BMDMethods: 119 patients were randomised to receive either a proximally coated dual taper wedge stem, a proximally coated anatomic stem or a fully coated collarless triple tapered stem. All surgeries were performed via the posterior approach with mobilization on the day of surgery. Dual energy x-ray absorptiometry scans (Lunar iDXA, GE Healthcare, Madison, WI) assessed BMD across the seven Gruen zones pre-operatively, and post-operatively at 6-weeks, 1-year, and 2-years and compared to the unoperated contralateral femur as a control. Patient reported outcome measures of pain, function and health were also included at these corresponding follow-ups.

BMD increased in zones one (2.5%), two (17.1%), three (13.0%), five (10%) and six (17.9%) for all stems. Greater preservation of BMD was measured on the lateral cortex (zone 2) for both the dual taper wedge and anatomic stems (p = 0.019). The dual taper wedge stem also demonstrated preservation of BMD in the medial calcar (zone 7) whilst the anatomic and triple taper stem declined in this region, however this was not statistically significant (p = 0.059). BMD decreased on average by 2.1% inthe mid-diaphysis region, distal to the stem tip (zone 4) for all implants. All stems performed equivalently at final follow-up in all patient reported outcome measures.

This study demonstrated maintenance of femoral BMD in three different cementless femoral stem designs, with all achieving excellent improvements in patient reported outcomes. There was no significant stress shielding observed, however longer follow-up is required to elucidate the impact of this finding on implant survivorship.

Thumb carpometacarpal joint (CMCJ) arthritis is a common and debilitating condition. The mainstay of surgical management is Trapeziectomy. Concerns about possible functional implications of collapse of the metacarpal into the arthroplasty space as well as the potential for scaphometacarpal led to the development of techniques to try and prevent this. The purpose of this study was to investigate if there were any significant differences in the long-term outcomes of patients who participated in a randomized trial of trapeziectomy alone compared with trapeziectomy with ligament reconstruction and tendon interposition (LRTI).

Sixty-five patients participated in our original trial, the 1 year findings of which were published in 2007. These patients were invited for a follow-up visit at a mean of 17 years (range 15–20) postoperatively. Twenty-eight patients attended, who had 34 operations, 14 trapeziectomy alone and 20 with LRTI. Patients were asked to complete a visual analogue scale (VAS) for satisfaction with the outcome of their procedure, rated on a scale from 0 (most dissatisfied) to 100 (most satisfied). They also completed the short version of the Disabilities of the Arm, Shoulder and Hand Score (QuickDASH) at their appointment. They underwent a functional assessment with a hand therapist and had a radiograph of the thumb.

There were no statistically significant differences between the two groups in terms of satisfaction with surgery or functional outcomes, with most measurements showing minimal or no differences in means between the two groups. There was no difference in the space between the metacarpal and scaphoid on radiograph. Radial abduction was the only parameter that was significantly greater in the patients with simple trapeziectomy (median 79°) compared with trapeziectomy with LRTI (median 71°) (p = 0.04). Even at 17 years there is no significant benefit of LRTI over trapeziectomy alone for thumb carpometacarpal joint osteoarthritis.

Background

Periprosthetic joint infection (PJI) following total knee arthroplasty (TKA) is a severe complication in terms of disability, morbidity, and cost. We performed a study to investigate whether early PJI (within 90 days of primary TKA) is associated with increased mortality. Secondary aims were to compare mortality rates over time and between surgical treatment methods.

Aims

To achieve expert clinical consensus in the delivery of hydrodilatation for the treatment of primary frozen shoulder to inform clinical practice and the design of an intervention for evaluation.

Abstract

Aims

Meniscal allograft transplantation (MAT) for patients with symptomatic meniscal loss has demonstrated good clinical results and survivorship. Factors that affect both functional outcome and survivorship have been reported in the literature. These are typically single-centre case series with relatively small numbers and conflicting results. Our aim was to describe an international, two-centre case series, and identify factors that affect both functional outcome and survival.

The jackaling position within rugby has not been previously described as a mechanism for proximal hamstring injuries.

This prospective single surgeon study included 54 professional rugby players (mean age 26 ± 4.8 years) undergoing acute primary surgical repair of complete, proximal hamstring avulsion injuries confirmed on preoperative magnetic resonance imaging. All study patients underwent a standardised postoperative rehabilitation programme. Predefined outcomes were recorded at regular intervals. Mean follow-up time was 17 months (range, 12 months to 24 months) from date of surgery.

51 patients (94.4%) returned to their pre-injury level of sporting activity. Mean time from surgical repair to full sporting activity was 7 months (range, 4 months to 12 months). Zero patients had recurrence of the primary injury. At 1 year after surgery compared to 3 months after surgery, patients had increased mean isometric hamstring muscle strength at 0° (98.4 ± 2.8% vs 88.1% ± 5.4%, p<0.001), 15° (95.9 ± 2.9 vs 88.2 ± 8.1%, p<0.001) and 45° (92.9% ± 4.1% vs 76.8% ± 9.7%, p<0.001), higher mean lower extremity functional scores (77.0 ± 2.3 vs 64.5 ± 4.5, p<0.001), and improved Marx activity rating scores (14.3 ± 1.5 vs 10.7 ± 2.6, p<0.001).

Acute surgical repair of proximal hamstring avulsion injuries caused by the contact jackaling position produces high patient satisfaction, high return to preinjury level of sporting activity, with low risk of recurrence at short-term follow-up.

Introduction

Traditionally, limb reconstruction physiotherapy consisted of face to face group rehabilitation. During the COVID-19 pandemic OP physiotherapy service provision was significantly reduced and delivery methods limited due to staff redeployment, service prioritisation and restriction of footfall within the hospital. A virtual exercise group for acute limb reconstruction patients was set up to maintain contact and clinical support.

Aim

Strenuous efforts to minimize postoperative infection rates have been made, including the Swedish nation-wide initiative Prosthesis Related Infections Shall be Stopped (PRISS). The aim of this study was to calculate the incidence rate of periprosthetic joint infections (PJI) following primary total knee arthroplasty (TKA) before and after PRISS.

Aims

Pelvic tilt (PT) can significantly change the functional orientation of the acetabular component and may differ markedly between patients undergoing total hip arthroplasty (THA). Patients with stiff spines who have little change in PT are considered at high risk for instability following THA. Femoral component position also contributes to the limits of impingement-free range of motion (ROM), but has been less studied. Little is known about the impact of combined anteversion on risk of impingement with changing pelvic position.

The Exeter^™ V40 cemented polished tapered stem system has demonstrated excellent long-term outcomes. This paper presents a systematic review of the existing literature and reports on a large case series comparing implant fractures between the Exeter V40 series; 125 mm and conventional length stem systems.

A systematic literature search was performed adhering to PRISMA criteria. In parallel we performed a retrospective single centre study of Exeter^™ V40 femoral stem prosthetic fractures between April 2003– June 2020.

There are 25 reported cases of such prosthetic fractures confined to small case series and case reports within the literature. We report an additional 19 cases to the literature (mean age 66.3 ± 11.7 years; 12 female [63%]; body mass index 32.9 ± 5.9 kg/m²). The mean time from index procedure to fracture was 7.8 years (2.5–16.3, ±3.6). Exeter V40 stem fracture incidence was 0.27%. Incidence was significantly higher in 125 mm length stems compared to ≥150 mm length stems (1.26% vs 0.13%, respectively, p <0.001) and revision arthroplasty (1.209% vs 0.149%, p <0.001). When comparing different stem length cohorts, 125-mm short-stem were associated with stem body fractures (92% vs 29%, p = 0.0095), earlier time to fracture (6.2 vs 11.0 years, p = 0.0018), younger patient age at time of fracture (62.7 vs 72.6 years old, p = 0.037) and female sex (75% vs 43%, p = 0.33).

This case series in conjunction with the systematic review provides evidence stem morphology plays a role in femoral implant fracture. This complication remains rare, although we report a significantly higher incidence at up to 17 years follow-up than in the literature. As femoral geometries remain the same, increasing BMIs in THR patients should raise concern. Short 125 mm length Exeter V40 stems undoubtedly have a role in restoring anatomy and biomechanics in smaller femoral geometries, although the surgeon has to appreciate the higher risk of stem fracture and the associated predisposing factors which may necessitate meticulous surgical technique and planning.

Aims

The Exeter V40 cemented polished tapered stem system has demonstrated excellent long-term outcomes. This paper presents a systematic review of the existing literature and reports on a large case series comparing implant fractures between the Exeter V40 series; 125 mm and conventional length stem systems.

Scoliosis is estimated to occur between 21–64% of patients with cerebral palsy (CP), where a subset of patients develops early onset scoliosis (EOS) before the age of ten. Traditional growth friendly (TGF) surgeries in the context of traditional growing rods have been shown to be effective in treating scoliosis in this population, however significant complication rates are reported. Currently, no studies have been done to examine the effect of novel growth friendly surgeries such as magnetically controlled growing rods (MCGR) on EOS in CP patients. The objective of this study is to compare MCGR with TGF surgeries in this patient population, specifically by evaluating radiographic measurements and risk of unplanned reoperations (UPRORs).

Patients with EOS secondary to CP were prospectively identified from an international database, with data retrospectively analyzed. Scoliosis (primary curve), maximum kyphosis, T1-S1 and T1-T12 height were measured pre-operation, immediate post-operation, and at two-years follow-up. The risk and etiology of UPRORs were compared between MCGR and TGF. P < 0.05 was considered statistically significant for all analyses.

Of the 120 patients that met inclusion criteria, 86 received TGF (age 7.5 ± 1.8 years; follow-up 7.0 ± 2.9 years) and 34 received MCGR (age 7.1 ± 2.2 years, follow-up 2.8 ± 0.5 years). Compared to TGF, MCGR resulted in significant improvements in maintenance of scoliosis correction (p=0.04). At final follow-up, UPRORs were 24% for MCGR (8/34 patients) and 43% (37/86 patients) for TGF (p=0.05). To minimize the influence of follow-up period, UPRORs within the first two years post-operation were evaluated: MCGR (21%, 7/34 patients) vs. TGF (14%, 12/86 patients; p=0.37). Within the first two years, etiology of UPROR as a percentage of all patients per group were deep infection (5% TGF, 6% MCGR), implant failure/migration (5% TGF, 9% MCGR), dehiscence (2% TGF, 3% MCGR), and superficial infection (1% TGF, 3% MCGR). The most common etiology of UPROR for TGF was deep infection and implant failure/migration and for MCGR was implant failure/migration.

For patients with CP, at final follow-up, MCGR had superior maintenance of scoliosis correction; however, there was no difference in risk of UPROR within the first two years post-operatively (21% MCGR, 14% TGF).

Although 80% of fractures typically heal without any problems, there is a small proportion (<20%) that suffer complications such as delayed healing and potential progression to non-union. In patients with healing complications, the coordinated regulation between pro- and anti-inflammatory cytokines, such as interleukin-1β (IL-1β) and interleukin-1 receptor antagonist (IL-1Ra) respectively, is often dysregulated. The aim of this study is to develop a therapeutic strategy based on the local delivery of genes to reparative mesenchymal stromal cells (MSCs) migrating into the local fracture microenvironment, thereby promoting a more favourable healing environment to enhance fracture repair. Our approach involves the local delivery of nanoparticles complexing the non-viral vector polyethyleneimine (PEI) with therapeutic plasmid DNA (pDNA) encoding for IL-1Ra.

pDNA encoding green fluorescent protein and Gaussia luciferase were used as reporter genes to determine the transfection efficiency of both rat and human MSCs using flow cytometry and to assess the transgene expression profile using a luciferase expression assay. The effect of transfection with PEI on the viability of MSCs was assessed using the metabolic assay Cell Titer Blue and dsDNA quantification. Levels of IL-1Ra produced by cells following transfection with nanoparticles encoding IL-1Ra was assessed using enzyme-linked immunosorbent assays (ELISA). HEK-Blue IL-1β reporter cells, which secrete alkaline phosphatase in response to IL-1β stimulation, were used to confirm that the IL-1Ra produced by transfected cells is functionally active, i.e. the successful antagonism of IL-1β bioactivity.

We have determined that using PEI-based nanoparticles we can achieve a transfection efficiency of 14.8 + 1.8% in rat MSCs. Transgene expression was found to be transient, with a peak in expression at 7 days post-transfection and a gradual decrease over time, which was maintained for up to 4 weeks. Using an optimized concentration of PEI, the impact of the nanoparticles on MSC viability was limited, with no significant difference in cellular metabolic activity compared to non-transfected cells at 10 days post-transfection. We have additionally demonstrated the capacity to successfully transfect both rat and human MSCs with pDNA encoding for IL-1Ra, resulting in enhanced levels of IL-1Ra, which is functionally active.

The use of non-viral gene therapy to locally deliver immunomodulatory genes, such as IL-1Ra, to MSCs presents a promising strategy to enhance bone healing. Specifically, the transgene expression levels achieved with such an approach can remain therapeutically effective and are transient in nature, presenting an advantage over other methods such as recombinant protein delivery and viral-based gene delivery methodologies.

Abstract

Abstract

Staphylococcus aureus is the main cause of osteomyelitis and forms biofilm and staphylococcal abscess communities (SACs) in humans. While S. aureus has several toxins with specificity for human targets and working with human host cells would be preferred, for SACs no in vitro models, two-dimensional (2D) or three-dimensional (3D), have been described in literature to date. Advanced 3D in vitro cell culture models enable the incorporation of human cells and resemble in vivo tissue more closely than conventional 2D cell culture. Therefore, the aim of this study was to develop an in vitro model of SACs by using a 3D system. The model should allow for studies into antibiotic tolerance and S. aureus - human host cells interactions.

With a clinical isolate (S. aureus JAR) or a lab strain (S. aureus ATCC 49230-GFP), SACs were grown in a collagen gel (1.78 mg/ml, Gibco) supplemented with 200 µl human plasma at 37 °C. Transmission and scanning electron microscopy was used to obtain a detailed overview of SACs, whereas immunofluorescent stainings were done to determine whether the pseudocapsule around SACs consist of fibrin. Antibiotic tolerance of SACs was assessed with 100× the minimal inhibitory concentration (MIC) of gentamicin (Roth). Bacterial clearance of non-establised SACs and established SACs with or without pseudocapsule was determined by exposure to differentiated PLB neutrophil-like cells (differentiation with 1.25% DMSO and 5% FBS for 5 days; dPLB) or primary neutrophils isolated with lymphoprep from fresh heparin blood. Degradation of the pseudocapsule was done with 7.5 µl/ml plasmin (Sigma). Colony forming unit (CFU) counts were performed as quantification method. Statistical analysis was performed with the ANOVA multiple comparison test or, when data was not normally distributed, with a Mann-Whitney U test.

We have developed a 3D in vitro model of SACs which after overnight growth were on average 200 micrometers in diameter, consisted of 8 log10 CFUs and were surrounded by an inner and outer fibrin pseudocapsule. The in vitro grown SACs tolerated 100× the MIC of gentamicin for 24h and did not significantly differ from control SACs (p=0.1000). dPLB neutrophil-like cells or primary neutrophils did not clear established in vitro SACs (p=0.1102 and p=0.8767, respectively). When the fibrin pseudocapsule was degraded by the enzyme plasmin, dPLB neutrophil-like cells or primary neutrophils caused for a significant decrease in total CFU compared the SACs that did had a pseudocapsule (p=0.0333 and p=0.0272, respectively).

The in vitro SACs model offers a tool for host-pathogen interaction and drug efficacy assessments and is a valuable starting point for future research.

Introduction

Total Hip Arthroplasty (THA) devices are now increasingly subjected to a progressively greater range of kinematic and loading regimes from substantially younger and more active patients. In the interest of ensuring adequate THA solutions for all patient groups, THA polyethylene acetabular liner (PE Liner) wear representative of younger, heavier, and more active patients (referred to as HA in this study) warrants further understanding.

Previous studies have investigated HA joint related morbidity [1]. Current or past rugby players are more likely to report osteoarthritis, osteoporosis, and joint replacement than a general population.

This investigation aimed to provide a preliminary understanding of HA patient specific PE liner tribological performance during Standard Walking (SW) gait in comparison to IS0:14242-1:2014 standardized testing.

Aims

We present the development of a day-case total hip arthroplasty (THA) pathway in a UK National Health Service institution in conjunction with an extensive evidence-based summary of the interventions used to achieve successful day-case THA to which the protocol is founded upon.

Aims

To compare changes in gait kinematics and walking speed 24 months after conventional (C-MLS) and minimally invasive (MI-MLS) multilevel surgery for children with diplegic cerebral palsy (CP).

Intrathecal morphine (IM) is a common adjunct in paediatric spinal deformity surgery. We previously demonstrated with idiopathic scoliosis it provides safe and effective analgesia in the immediate postoperative period. This study represents our 25 year experience with IM in all diagnostic groups.

Our prospective Pediatric Orthopaedic Spine Database (1993–2018) was reviewed to identify all patients undergoing spinal deformity surgery who received IM and who did not. Patients 21 years of age or less who had a posterior spinal fusion (PSF) with segmental spinal instrumentation (SSI), and received 9–19 mcg/kg (up to 1 mg) of IM were included. Early onset scoliosis surgical patients were excluded. We assessed demographics, pain scores, time to first dose of opioids, diagnoses, surgical time, paediatric intensive care unit (PICU) admission and IM complications (respiratory depression, pruritus, nausea/ vomiting).

There were 986 patients who met inclusion criteria. This included 760 patients who received IM and 226 who did not. IM was not used for short procedures (< 3 hrs), respiratory concerns, unsuccessful access of intrathecal space, paraplegia, and anesthesiologist decision. Both groups followed the same strict perioperative care path. The patients were divided into 5 diagnostic groups (IM / non IM patients): idiopathic (578/28), neuromuscular (100/151), syndromic (36/17), and congenital scoliosis (32/21) and kyphosis (14/9). Females predominated over males (697/289). The first dose of opioids after surgery was delayed for a mean of 10.6 hrs in IM group compared to 2.3 hrs in the non-IM group (p=0.001). The postoperative pain scores were significantly lower in the IM groups in the Post Anesthesia Care Unite (p=0.001). Only 17 IM patients (2%) were admitted to the PICU for observation secondary to respiratory depression, none required re-intubation. None of the IM group were re-intubated. Forty-nine patients (6%) experienced pruritus in the IM group compared to 4 of 226 patients (2%) in the non IM group. There were 169 patients (22%) of the IM patients and 21 patients (9%) of the non IM had nausea and vomiting postoperatively. Three patients (0.39%) had a dural leak from the administration of IM but did not require surgical repair. There were no other perioperative complications related to the use of IM. There were no significant group differences.

Pre-incision IM is a safe and effective adjunct for pain management in all diagnostic groups undergoing spinal surgery. The IM patients had lower pain scores and a longer time to first administration of post-operative opioids. Although there is an increased frequency of respiratory depression, pruritus, and nausea/vomiting in the IM group, there were no serious complications.

Aim

Non-steroidal anti-inflammatory drugs (NSAIDs) are a cornerstone of perioperative pain management in orthopedic trauma surgery, although concerns persist regarding the potential impact of these drugs on fracture healing. Furthermore, NSAIDs may also exert an influence on host immune defenses, which may also be important in the context of infection treatment. However, this has been very much under-investigated in the clinical and scientific literature. The aim of this study was to determine the impact of NSAIDs on the course of an orthopedic device-related infection (ODRI) and its response to antibiotic therapy in a rat model.

Aims

The aim of this study was to compare the surgical and quality-of-life outcomes of children with skeletal dysplasia to those in children with idiopathic early-onset scoliosis (EOS) undergoing growth-friendly management.

Introduction

Sensory profiles classified in Low Registration, Sensory Sensitive, Sensation Avoiding and Sensation Seeking may be used in patients with non-specific chronic low back pain (CLBP) to develop a more personalized treatment program. Although psychometric properties have not been studied up till now the Adult Adolescent Sensory Profile (AASP) can be used to measure sensory profiles in CLBP patients.

Impingement of total hip replacements (THRs) can cause rim damage of polyethylene liners, and lead to dislocation and/or mechanical failure of liner locking mechanisms[1]. Previous work has focussed on the influence of femoral neck profile on impingement without consideration of neck-shaft angle. This study assessed the occurrence of impingement with two different stem designs (Corail standard [135°] and coxa vara [125°]) under different activities with varying acetabular cup orientation (30° to 70° inclination; 0° to 50° anteversion) using a geometric modelling tool.

The tool was created in a computer aided design software programme, and incorporated an individual's hemi-pelvis and femur geometry[3] with a THR (DePuy Synthes Pinnacle^® shell and neutral liner; size 12 Corail^® standard or coxa vara and 32mm head). Kinematic data of activities associated with dislocation[2], such as stooping to pick an object from the floor was applied and incidences of impingement were recorded.

Predicted implant impingement was influenced by stem design. The coxa vara stem was predicted to cause implant impingement less frequently across the range of activities and cup orientations investigated, compared to the standard stem [Fig. 1]. The cup orientations predicted to cause impingement the least frequently were at lower inclination and anteversion angles, relative to the standard stem [Fig. 1]. The coxa vara stem included a collar, while the standard stem was collarless; additional analysis indicated that differences were due to neck angle and not the presence of a collar.

This study demonstrated that stem neck-shaft angle is an important variable in prosthetic impingement in THR and surgeons should be aware of this when choosing implants. Future work will consider further implant design and bone geometry variables. This tool has the potential for use in optimising stem design and position and could assist with patient specific stem selection based on an individual's activity profile.

For any figures or tables, please contact the authors directly.

Introduction

Impingement of total hip arthroplasties (THAs) has been reported to cause rim damage of polyethylene liners, and in some instances has led to dislocation and/or mechanical failure of liner locking mechanisms in modular designs. Elevated rim liners are used to improve stability and reduce the risk of dislocation, however they restrict the possible range of motion of the joint, and retrieval studies have found impingement related damage on lipped liners.

The aim of this study was to develop a tool for assessing the occurrence of impingement under different activities, and use it to evaluate the effects a lipped liner and position of the lip has on the impingement-free range of motion.

INTRODUCTION

There is great potential for the use of computational tools within the design and test cycle for joint replacement devices.

The increasing need for stratified treatments that are more relevant to specific patients, and implant testing under more realistic, less idealised, conditions, will progressively increase the pre-clinical experimental testing work load. If the outcomes of experimental tests can be predicted using low cost computational tools, then these tools can be embedded early in the design cycle, e.g. benchmarking various design concepts, optimising component geometrical features and virtually predicting factors affecting the implant performance. Rapid, predictive tools could also allow population-stratified scenario testing at an early design stage, resulting in devices which are better suited to a patient-specific approach to treatment.

The aim of the current study was to demonstrate the ability of a rapid computational analysis tool to predict the behaviour of a total hip replacement (THR) device, specifically the risk of edge loading due to separation under experimental conditions.

INTRODUCTION

Component positioning of an artificial hip joint plays a key role in durability of implant. Despite the fact that a number of numerical, experimental and clinical studies have been carried out to investigate the effects of cup inclination on polyethylene wear, steep inclination has been reported to be associated with both high and low volumetric wear. Moreover, how cup anteversion affects wear and its interaction with inclination are still unclear. To address these knowledge gaps, in this study wear and contact mechanics of a hip joint under various cup positioning has been investigated by using FEA (Finite Element Analysis).

Introduction

One of the known mechanisms which could contribute to the failure of total hip replacements (THR) is edge contact. Failures associated with edge contact include rim damage and lysis due to altered loading and torques. Recent study on four THR patients showed that the inclusion of pelvic motions in a contact model increased the risk of edge contact in some patients. The aim of current study was to determine whether pelvic motions have the same effect on contact location for a larger patient cohort and determine the contribution of each of the pelvic rotations to this effect.

Mismatch of bearing component centres and tension of soft tissues surrounding the hip joint can lead to component separation during gait cycle and cause the femoral head to contact the rim of an acetabular liner, which could increase wear and shorten lifespan of an implant. This study aims to investigate the contact and wear mechanics of a metal-on-polyethylene hip joint under dynamic separation by using Finite Element Analysis (FEA).

A Pinnacle® cup with a Marathon neutral liner 36×56mm with a 45° inclination was constrained by a spring element in the medial-lateral axis. The spring was pre-compressed by 4mm to represent the corresponding translational mismatch of a simulator testing. Archard's law was used to predict wear over one ISO 14242-1 gait cycle.

Contact pressure is proportional to the load input during the stance phase, associated with concentric contact condition; it increases threefold just before the swing phase (time C), reaching 46.2MPa, where edge loading occurs. Consequently, separation climbs to 3.54mm, which is comparable to the mathematical prediction (3.34mm) and dynamic FEA (3.2mm). The predicted volumetric wear after this gait cycle is 1.22 × 10–5 mm3.

Dynamic separation between femoral head and acetabular liner can result in edge loading, consequently high contact pressure on the edge of a liner. In combination with cyclic loading, fatigue damage could take place and may be worth investigating in the future.

Aim

The purpose of this study was to report on outcomes after stabilization of large skeletal defects following radical debridement of hip or knee infections and staged reimplantation using segmental antibiotic mega-spacers.

Aims

The significance of the ‘clicky hip’ in neonatal and infant examination remains controversial with recent conflicting papers reigniting the debate. We aimed to quantify rates of developmental dysplasia of the hip (DDH) in babies referred with ‘clicky hips’ to our dedicated DDH clinic.

Aims

The aim of this study was to compare the outcomes of surgery using growing rods in patients with severe versus moderate early-onset scoliosis (EOS).

Introduction

Primary cilia are singular structures containing a microtubule-based axoneme which are believed to not only be mechanosensitive but also to co-ordinate many cell functions via signalling pathways including Hedgehog and Wnt. Primary cilia have previously been described on cells of mouse intervertebral discs (IVDs), but not in bovine or human IVDs. Our aim was to examine primary cilia in these species.

Aims

Meniscal allograft transplantation is undertaken to improve pain and function in patients with a symptomatic meniscal deficient knee compartment. While case series have shown improvements in patient reported outcome measures (PROMs), its efficacy has not been rigorously evaluated. This study aimed to compare PROMs in patients having meniscal transplantation with those having personalized physiotherapy at 12 months.

Aim

Patients reporting penicillin allergy do often receive clindamycin as systemic antibiotic prophylaxis. The effect of clindamycin has however not been compared to antibiotics with proven effect in joint arthroplasty surgery. The aim of the study was to reveal if there were differences in the rate of revision due to infection after total knee arthroplasty (TKA) depending on which antibiotic was used as systemic prophylaxis.

Aims

The interaction between surgical lighting and laminar airflow is poorly understood. We undertook an experiment to identify any effect contemporary surgical lights have on laminar flow and recommend practical strategies to limit any negative effects.

Aims

The aim of this study was to compare the effectiveness of a femoral nerve block and a periarticular infiltration in the management of early post-operative pain after total knee arthroplasty (TKA).

Background

Many factors contribute to the occurrence of edge-loading conditions in hip replacement; soft tissue tension, surgical position, patient biomechanical variations and type of activities, hip design, etc. The aim of this study was to determine the effect of different levels of rotational and translational surgical positioning of hip replacement bearings on the occurrence and severity of edge-loading and the resultant wear rates.

Introduction and Aims

Clinically many factors such as variations in surgical positioning, and patients' anatomy and biomechanics can affect the occurrence and severity of edge loading which may have detrimental effect on the wear and durability of the implant. Assessing wear of hundreds of combinations of conditions would be impractical, so a preclinical testing approach was followed where the occurrence and severity of edge loading can be determined using short biomechanical tests. Then, selected conditions can be chosen under which the wear can be determined. If a wear correlation with the magnitude of dynamic separation or the severity of edge loading can be shown, then an informed decision can be made based upon the biomechanical results to only select important variables under which the tribological performance of the implant can be assessed. The aim of this study was to determine the relationship between the wear of ceramic-on-ceramic bearings and the (1) magnitude of dynamic separation, (2) the maximum force reached during edge loading and (3) the severity of edge loading resulting from component translational mismatch between the head and cup centres.

Introduction and Aims

There are many variables that can affect the occurrence and severity of edge loading in hip replacement. A translational mismatch between the centres of rotation of the head and cup may lead to dynamic separation, causing edge loading and increased wear. Combining a steep inclination angle with such translational mismatch in the medial-lateral axis caused a larger magnitude of separation and increased severity of edge loading. Previous studies have shown variation in the hip Swing Phase Load (SPL) during gait between different patients. The aim of this study was to apply a translational mismatch and determine the effect of varying the SPL on the occurrence and severity of edge loading under different cup inclination angles in a hip joint simulator.

Introduction

Variations in component position can lead to dynamic separation and edge loading conditions. In vitro methods have been developed to simulate edge loading conditions and replicate stripe wear, increased wear rate, and bimodal wear debris size distribution, as observed clinically [1, 2]. The aim of this study was to determine the effects of translational and rotational positioning on the occurrence of dynamic separation and severity of edge loading, and then investigate the wear rates under the most severe separation and edge loading conditions on an electromechanical hip joint simulator.

This longitudinal microCT study revealed the osteolytic response to a Staphylococcus epidermidis-infected implant in vivoand also demonstrates how antibiotics and/or a low bone mass state influence the morphological changes in bone and the course of the infection.

Colonisation of orthopaedic implants with Staphylococcus aureusor S. epidermidisis a major clinical concern, since infection-induced osteolysis can drastically impair implant fixation or integration within bone. High fracture incidence in post-menopausal osteoporosis patients means that this patient group are at risk of implant infection. The low bone mass in these patients may exacerbate infection-induced osteolysis, or alter antibiotic efficacy. Therefore, the aims of this study were to examine the bone changes resulting from a S. epidermidisimplant infection in vivousing microCT imaging, and to determine if a low bone mass stateinfluences the course of the infection and the efficacy of antibiotic therapy. An in vivomodel system using microCT scanning [1], involving the implantation of either a sterile or a S. epidermidis-colonised PEEK screw into the proximal tibia of 24 week-old female Wistar rats, was used to investigate the morphological changes in bone following infection over a 28 day period. In addition, the efficacy of a combination antibiotic therapy (rifampin and cefazolin: administered twice daily from days 7–21 post-screw implantation) for affecting osteolysis was also assessed. A subgroup of animals was subjected to ovariectomy (OVX) at 12 weeks of age, allowing for a 12 week period for bone loss prior to screw implantation at 24 weeks. Bone resorption and formation rates, bone-implant contact and peri-implant bone volume in the proximity of the screw were assessed by microCT scanning at days 0, 3, 6, 9, 14, 20 and 28 days post-surgery. Following euthanasia at day 28, the implanted screw, bone and soft tissues were subjected to quantitative bacteriology as a measure of the efficacy of the antibiotic regimen. In non-OVX animals S. epidermidisinfection induced marked osteolysis, which peaked between 9 and 14 days post-screw implantation. Peak bone resorption was detected at day 6, before recovering to baseline levels at day 14. Infection also resulted in extensive deposition of mineralised tissue, initially within the periosteal region (day 9–14), then subsequently in the osteolytic region at day 20–28. Quantitative bacteriology indicated all non-OVX animals remained infected. Rifampin and cefazolin successfully cleared the infection in 5/6 non-OVX animals group although there was no difference observed in CT-derived bone parameters. OVX resulted in extensive loss of trabecular bone but this did not alter the temporal pattern of infection-induced osteolysis, or mineralised tissue deposition, which was similar to that observed in the non-OVX animals. Similarly, there was no difference in bacterial counts between non-OVX and OVX animals (39,005 colony-forming units (CFU) [range: 3,675–156,800] vs 37,665 CFU [range 3,250–84,000], respectively). Interestingly, antibiotic treatment was less effective in the OVX animals (3/5 remained infected), suggesting that antibiotics have reduced efficacy in OVX animals. This study demonstrates S. epidermidis-induced osteolysis displays a similar temporal pattern in both normal and low bone mass states, with comparable bacterial loads present within the localised infection site.

Unstable slipped capital femoral epiphysis (SCFE) has an increased incidence of avascular necrosis (AVN). The purpose of this study was to determine if early identification and intervention for AVN may help preserve the femoral head.

We retrospectively reviewed 48 patients (50 hips) with unstable SCFE managed between 2000 and 2014. Based on two different protocols during the same time period, 17 patients (17 hips) had a scheduled MRI between 1 and 6 months from initial surgery, with closed bone graft epiphysiodesis (CBGE) or free vascularised fibular graft (FVFG) if AVN was diagnosed. Thirty-one patients (33 hips) were evaluated by plain radiographs. Outcomes analysed were Steinberg classification and subsequent surgical intervention. We defined Steinberg class IVC as failure in treatment because all of the patients referred for osteotomy, arthoplasty, or arthrodesis in our study were grade IVC or higher.

Overall, 13 hips (26%) with unstable SCFE developed AVN. MRI revealed AVN in 7 of 17 hips (41%) at a mean of 2.5 months postoperatively (range, 1.0 to 5.2 months). Six hips diagnosed by MRI received surgical intervention (4 CBGE, 1 FVFG, and 1 repinning due to screw cutout) at a mean of 4.1 months (range, 1.3 to 7.2 months) postoperatively. None of the 4 patients treated with CBGE within two months postoperatively progressed to stage IVC AVN. The two patients treated after four months postoperatively both progressed to stage VC AVN. Radiographically diagnosed AVN occurred in 6 of 33 hips (18%) at a mean of 6.8 months postoperatively (range, 2.1 to 21.1 months). One patient diagnosed with stage IVB AVN at 2.4 months had screw cutout and received CBGE at 2.5 months from initial pinning. The remaining 5 were not offered surgical intervention. Five of the 6 radiographically diagnosed AVN, including the one treated with CBGE, progressed to stage IVC AVN or greater.

None of the 4 patients with unstable SCFE treated with CBGE within 2 months post pinning developed grade IVC AVN, while all patients treated with other procedures after 2 months developed IVC or greater AVN. Early detection and treatment of AVN after SCFE may alter the clinical and radiographic progression.

Aims

We undertook a prospective non-randomised radiological study to evaluate the preliminary results of using magnetically-controlled growing rods (MAGEC System, Ellipse technology) to treat children with early-onset scoliosis.

Introduction and Aims

In order to improve the longevity and design of an implant, a wide range of pre-clinical testing conditions should be considered including variations in surgical delivery, and patients' anatomy and biomechanics. The aim of this research study was to determine the effect of the acetabular cup inclination angle with different levels of joint centre mismatch on the magnitude of dynamic microseparation, occurrence and severity of edge loading and the resultant wear rates in a hip joint simulator.

Purpose and Background:

To compare static and dynamic lumbar intervertebral ranges of motion (IV-RoM) in patients with chronic, nonspecific low back pain with upper and lower cut off values derived from healthy controls when variability and measurement errors were reduced.

Measurements from functional radiographs suffer from high variability and measurement errors, making cut off values for excessive or insufficient motion problematical. This study compared maximum lumbar IV-RoM and maximum IV-RoM at any point in continuous motion sequences in patients with chronic, non-specific back pain with upper and lower cut off values for L2 to L5 from matched controls using quantitative fluoroscopy, where variation and measurement errors were reduced.

Introduction

Over 40-years the dominant form of implant fixation has been bone cement (PMMA). However the presence of circulating PMMA debris represents a 3rd-body wear mechanism for metal-on-polyethylene (MPE). Wear studies using PMMA slurries represent tests of clinical relevance (Table 1). Cup designs now use many varieties of highly-crosslinked polyethylene (HXPE) of improved wear resistance. However there appears to be no adverse wear studies of vitamin-E blended cups.1–4 The addition of vitamin E as an anti-oxidant is the currently preferred method to preserve mechanical properties and ageing resistance of HXPE. Therefore the present study examined the response of vitamin-E blended liners to PMMA abrasion combined with CoCr and ceramic heads. The hip simulator wear study was run in two phases to compare wear with, (i) clean lubricants and (ii) PMMA slurries.

Introduction

Increased wear rates [1, 2] and acetabular rim fracture [3] of hip replacement bearings reported clinically have been associated with edge loading, which could occur due to rotational and/or translational mal-positioning [4]. Surgical mal-positioning can lead to dynamic microseparation mechanisms resulting in edge loading conditions. In vitro microseparation conditions have replicated stripe wear and the bi-modal wear debris distribution observed clinically [5, 6]. The aim of this study was to investigate the effect of steep cup inclination, representing rotational mal-positioning, on the magnitude of dynamic microseparation, severity of edge loading, and the resulting wear rate of a ceramic-on-ceramic bearing, under surgical translational mal-positioning conditions.

Introduction

Tendon disease and rupture are common in patients with diabetes and these are exacerbated by poor healing. although nanoscale changes in diabetic tendon are linked to increased strength and stiffness. The resistance to mechanical damage of a tissue may be measured using fatigue testing but this has not been carried out in diabetic tendon, although the toughness of diabetic bone is known to be reduced. The aim of this study was to measure the static fatigue behaviour of tendons from a streptozotocin (STZ)-induced rat model of diabetes, hypothesising that diabetes causes tendon to show lower resistance to mechanical damage than healthy tendon.

Objectives

Subtotal or total meniscectomy in the medial or lateral compartment of the knee results in a high risk of future osteoarthritis. Meniscal allograft transplantation has been performed for over thirty years with the scientifically plausible hypothesis that it functions in a similar way to a native meniscus. It is thought that a meniscal allograft transplant has a chondroprotective effect, reducing symptoms and the long-term risk of osteoarthritis. However, this hypothesis has never been tested in a high-quality study on human participants. This study aims to address this shortfall by performing a pilot randomised controlled trial within the context of a comprehensive cohort study design.

Objectives

The clinical utility of routine cross sectional imaging of the abdomen and pelvis in the screening and surveillance of patients with primary soft-tissue sarcoma of the extremities for metastatic disease is controversial, based on its questionable yield paired with concerns regarding the risks of radiation exposure, cost, and morbidity resulting from false positive findings.

Background:

Tibia Vara (Blount's disease) is characterized by a growth disturbance of the posteromedial proximal tibial physis. This results in the typically complex tibial deformity of varus, procurvatum and internal tibial torsion. Knee instability is due to medial tibial joint depression and lateral ligament complex attenuation. Femoral angular and rotational deformity are associated features. Obesity often complicates management. Langenskiöld observed six stages of the disorder on X-ray (stage 6 not occurring before 9 years) and obtained good results with proximal tibial realignment osteotomy if performed before the age of 8 years. Our experience is very different.

Background:

Recurrent or late presenting Tibia Vara is a complex clinical problem. In addition to the multiplanar deformity the disorder is often accompanied by obesity. Simple re-alignment osteotomy with acute correction is effective early in the disease. Its use in recurrent or severe deformities is limited by geometric constraints (mechanical axis translation), difficult fixation and the risk of compartment syndrome. Gradual correction with external fixation devices is a well-accepted technique in these cases. It has been shown to obtain accurate correction and provides stable fixation. This allows early weight bearing which facilitate consolidation and rehabilitation. Hexapod fixators are technically less demanding than standard Ilizarov techniques. The TLHex is a relatively new hexapod fixator available in South Africa. Frame pre-assembly allows easier mounting on a limb with complex deformity. The software allows for non-orthogonal mounting, which simplifies frame-mounting assessment. Double telescoping struts allow greater strut excursion and the outside mounting of struts on the ring increases mounting options for fixation elements.

This is the first report on its use in Blount's disease.

Introduction

Coxa vara is an uncommon orthopaedic condition. Problems associated with the definition, radiological appearance, classification and surgical treatment are discussed.

Introduction

Management of the sequelae of arthritis of the hip joint has changed over time. Total joint replacement has gained popularity due to retained mobility and stability. In the high demand paediatric and adolescent population problems are encountered with longevity of the procedure. Hip arthrodesis is a useful alternative procedure that sacrifices mobility of the joint to achieve pain relief and restores function. Several surgical techniques have been described to achieve hip fusion. We describe a technique that achieves concentric bone surfaces with hip resurfacing reamers. Maximum bone is preserved to maintain leg length. Trans-articular compression is achieved with cannulated screw fixation. Subtrochanteric de-functioning osteotomy completes the procedure to protect the fusion site and control the position of the limb. Our optimal position of fusion was 30 degrees of flexion, neutral to 5 degrees of abduction and neutral to 10 degrees of external rotation.

Autogenous bone grafting limitations have motivated the development of Tissue-Engineered (TE) biomaterials that offer an alternative as bone void fillers. However, the lack of a blood supply within implanted constructs may result in avascular necrosis and construct failure¹. The aim of this project was to investigate the potential of novel TE constructs to promote vascularisation and bone defect repair using two distinct approaches. In Study 1, we investigated the potential of a mesenchymal stem cell (MSC) and endothelial cell (EC) co-culture to stimulate pre-vascularisation of biomaterials prior to in vivo implantation². In Study 2, we investigated the potential of TE hypertrophic cartilage to promote the release of angiogenic factors such as VEGF, vascular invasion and subsequent endochondral bone formation in an in vivo model.

Collagen-only (Coll), collagen-glycosaminoglycan (CG) and collagen-hydroxyapatite (CHA) scaffolds were fabricated by freeze-drying³, seeded with cells and implanted into critical-sized calvarial and femoral defects in immunocompetent rats. In Study 1, Coll and CG scaffolds were initially seeded with ECs, allowed to form capillary-like networks before the delayed addition of MSCs and continued culture prior to calvarial implantation. In Study 2, CG and CHA scaffolds were seeded with MSCs and cultured under chondrogenic and subsequent hypertrophic conditions to form a cartilage pre-cursor prior to calvarial and femoral implantation in vivo.

MicroCT and histomorphometry quantification demonstrated the ability of both systems to support increased bone formation compared to controls. Moreover, the greatest levels of bone formation were observed in the CG groups, notably in those containing cartilage tissue (Study 2). Assessment of the immune response suggests the addition of MSCs promotes the polarisation of macrophages away from inflammation (M1) towards a pro-remodelling phenotype (M2).

We have developed distinct collagen-based systems that promote vascularisation and ultimately enhance bone formation, confirming their potential as advanced strategies for bone repair applications.

Summary

The BMP-2 content and bone forming potential of 2 leading allograft products (OsteoAMP® and Osteocel® Plus) was tested across 3 commercially available lots. Surprisingly, there was no BMP-2 content associated with the cells contained within Osteocel® Plus. OsteoAMP® contained greater than 1000 times the overall BMP-2 content than Osteocel® Plus. Correspondingly, Osteocel® Plus did not form new bone at any timepoint in the 12 week in vivo study while OsteoAMP® had increasing new bone formation at each sequential timepoint. Interestingly, the highest cellularity of Osteocel® Plus was just prior to implant at t₀, decreasing at each timepoint, decreasing further at the terminal endpoint of the study at 12 weeks (82% of cells had died or migrated). Conversely, the cellularity of OsteoAMP® increased at each timepoint.

A retrospective analysis of all paediatric patients admitted to Camp Bastion Role 3 between June 2006 and March 2013 was conducted from the UK trauma database. Patient demographics, mechanism of injury, anatomical distribution of injury and treatment are described.

Two hundred and ninety eight children were admitted, 225 males with a median age of 9 years old. The highest number of cases (78) was recorded in 2011. Overall there were 55 fatalities (85.6% male). Most injuries were by IED (68% of cases) with 74% requiring operative intervention. Seventy-four percent of casualties had three or more anatomical regional injuries. Whilst the most commonly injured region was the lower limb (78%), head injuries were seen in 41%, abdominal injuries in 48% and thorax injuries in 44%. Debridement (including amputations) (59.4%) and laparotomy (30.6%) were the commonest operations performed. Sixty percent of cases were in theatre within one hour of arrival. Amongst survivors the mean ISS score was 17 and amongst fatalities 43; NISS 22 and 51; RTS 5.45 and 2.91.

Paediatric blast injuries represent a significant burden to medical facilities in contemporary conflict. Whilst limb injuries predominate, the proportion of head and torso injuries is higher than seen in adult blast injuries.

With its high wear and corrosion resistance, CoCrMo alloy has been widely used for metal-on-metal total hip replacements (THRs). However, the use of the metal-on-metal implants has dropped substantially as a result of several alerts issued by the Medicines and Healthcare products Regulatory Agency (MHRA) due to concern on metal ion release [1]. However, some of the first generation of metal-on-metal THRs have lasted for more than 20 years [2]. It is far from clear why some MoM joints have survived, while other failed. It is known that dynamic changes occur at the metal surface during articulation. For example, a nanocrystalline layer has been reported on the topmost surface of both in vivo and in vitro CoCrMo THRs [3, 4] but it is not known whether this layer is beneficial or detrimental.

The current work focuses on the sub-surface damage evolution of explanted MoM hips, which is compared to in vitro tested CoCrMo hip prostheses. Site-specific TEM cross-section of both in vivo and in vitro CoCrMo samples were prepared by focused ion beam (FIB) in situ lift-out method (Quanta 200 3D with Omniprobe, FEI, the Netherlands). TEM of the FIB specimens was performed on various microscopes. Routine bright field imaging was performed on a Tecnai 20 (FEI, the Netherland) operating at 200 kV, while high resolution transmission electron microscopy (HRTEM) of the nanocrystalline layer and other surface species was undertaken on a Jeol 2010F (Jeol, Japan) operating at 200 kV.

A nanocrystalline layer (which was not present on the starting surfaces) was observed on both explanted in vivo and in vitro tested materials. For the explanted joints, the nanocrystalline layer was thin (a few 100 nm) and the extent did not appear to correlate with the local wear rate. For in vitro samples, the nanocrystalline layer was thicker (up to micron). HRTEM from this layer are shown in Fig. 1 and Fig. 2. The nanocrystallite size was ∼5 nm and appeared to be a mixture of face centred cubic and hexagonal close packed phases. The formation of the nanocrystalline layer and its correlation with wear behaviour are discussed.

Introduction

Stripe wear, observed on retrieved ceramic hip replacements, has only been replicated in vitro under translational mal-positioning conditions where the centres of rotation of the head and the cup are mismatched^1,2; an in vitro condition termed “microseparation”.

The aim of this study was to compare the edge loading mechanisms observed under microseparation conditions due to translational mal-positioning conditions simulated on two different hip joint simulators.

Indications for UKA for isolated osteoarthritis of the knee remain controversial. 229 UKA that were performed at our institution were evaluated for which factors was associated with a poor outcome. BMI > 35 was correlated with lower KSS scores than patients with BMI < 35. In contrast to prior reports, patients younger than 60 years old had higher scores than patients 60 years and older at 2 years. Women had an unacceptably high short-term revision rate for any reason of 6.5%. Popularity for UKA has increased, and a more in depth investigation of predictors of poor outcomes demonstrates that younger patients appear to have better results. Obese patients continue to improve up to 2 years after surgery and should not be precluded from undergoing UKA.

In August 2007 NICE issued its guidance for the treatment of patients with knee osteoarthritis (OA) with arthroscopic lavage. The recommendations stated that referral for arthroscopic lavage and debridement should not be offered as part of treatment for osteoarthritis, unless the person has osteoarthritis with a clear history of ‘mechanical locking’ (not gelling, giving way, or x-ray evidence of loose bodies). The aim of this study was to assess both the application of these guidelines over a four month period and whether this procedure had improved symptoms at first follow-up.

This was a retrospective review from August-December 2011. The total number of arthroscopies performed during this period was obtained from theatre records. Further data was obtained through the hospital's electronic database. The diagnosis of OA was made through the analysis of referral and clinic letters, plain radiographs, MRI reports and operation notes. Only those patients with persisting OA symptoms were included, those with OA and recent history of injury or trauma were excluded. During this time period, 222 knee arthroscopies were performed in total, 99 were identified with persistent OA symptoms.

Having identified these patients, referral letters were further analysed to identify the initial presenting symptom. Of the 99, 50 presented with pain, 28 presented with pain plus another symptom other than locking e.g. stiffness/swelling/giving-way, 21 presented with pain plus mechanical locking. According to current guidelines only these 21 patients should have been offered arthroscopic lavage as a form of treatment. In addition to these findings we identified what procedures had been carried out during arthroscopy for each symptom. Of those presenting with pain, 82% had a washout and debridement, 8% had washout, 4% had partial medial meniscectomy, 4% had lateral patellar release and 2% had partial lateral meniscectomy. Those with pain plus other symptoms not including locking, 82% had washout and debridement, 11% had partial medial meniscectomy, and 7% had a washout. Of those presenting with pain plus mechanical locking, 81% had washout and debridement and 19% had partial medial meniscectomy.

Following the procedure, we analysed the outcome of symptoms at first-follow up. The mean follow-up time was 8 weeks. Of those presenting with just pain, 44% showed improvement, 52% had no change/on-going symptoms, 2% were unknown. Of those with pain plus other symptoms other than locking, 57% showed improvement, 35% had no change/on-going symptoms, 8% unknown. Of those with pain plus mechanical locking, 80% showed improvement, 10% had no change/on-going symptoms, 10% unknown.

The results of this study support the current evidence that unless there are clear mechanical symptoms of locking, the use of arthroscopy in arthritic knee joints should be judicious and the reasons should be clearly documented.

Northern Ireland has previously demonstrated high incidence of Perthes' disease (11.6 per 100,000). The aim of this study is to confirm a declining incidence in this diagnosis in Northern Ireland.

We reviewed all patients that suffered a deep infection following anterior cruciate ligament (ACL) repair kept between January 2007 and April 2011 at our teaching hospital NHS trust, and the two local private hospitals.

18 patients were identified. All patients underwent at least 2 arthroscopic washouts, with limited synovectomy if required. Targeted antibiotics were commenced according to the culture results, and following microbiological advice. These patients were reviewed at a minimum of 1 year following eradication of infection (range 12–46 months). There were 7 surgeons performing the ACL reconstructions.

The primary outcome measure was graft failure requiring revision. Our secondary outcome measures were a history of ongoing instability, KT 1000™ measurement, Tegner and Lysholm outcome scores. There were 18 patients identified as having suffered infection after ACL infection (mean age 24.3 years, range 15–38 years). Average C Reactive Protein (CRP) was 217 on admission (range 59–397). The most common organism isolated was coagulase negative staphylococcus in 47.3% of cases. There were 3 graft failures within the infection group. Of the remaining 15 patients there were no episodes of ongoing instability and mean pivot shift grade was 1.1, mean KT 1000™ side-to- side difference was +1.8mm. There was a reported drop on the Tegner activity score of 1.75 (range 0–6) and mean Lysholm score was 89 (range 56–100).

The failure rate is slightly higher than that reported in the literature. Patient reported outcome measures in the patients are broadly consistent. We recommend an aggressive approach to the treatment of deep infection following ACL reconstruction, in order to achieve a satisfactory outcome.

Purpose

Platelet-Rich Plasma (PRP), an autologous derivative of whole blood that contains a supraphysiological concentration of platelets and growth factors. Most published studies have investigated the effect of PRP-conditioned media on cell cultures. We are not aware of any study that has investigated whole PRP with its cellular components on human tissue cultures. This study aims to investigate the effect of PRP on cell migration from human Achilles tendon explants, and the subsequent cellular proliferative effects in culture.

This is a case series report on the outcomes of patients that have received ORIF of their calcaneal fractures at Craigavon Hospital, Northern Ireland, for the first 2 years since it opened. It is a one surgeon series.

Purpose

Management of early onset scoliosis (EOS) can be very challenging. Surgery is indicated when orthotics and casting fail. Growing rod instrumentation has become an effective approach in controlling the deformity while allowing spinal growth. However, as with any surgery, there are known complications including failure of the proximal foundation. We analyzed our patients who underwent growing rod instrumentation and identified factors that were correlated with proximal foundation failure.

Purpose

The undulating pattern of the distal femur is well recognized. Radiographs do not always represent the full extent of the undulations. With recent increasing use of guided growth technique in the distal femur, it is important to define safe zones for screw placement.

INTRODUCTION

Total hip arthroplasty (THA) is regarded as one of the most successful surgeries in medicine. However, recent studies have revealed that ideal acetabular cup implantation is achieved less frequently than previously thought, as little as 50% of the time. It is well known that malalignment of the acetabular component in THA may result in dislocation, reduced range of motion, or accelerated wear. This study reports accuracy of a tactile robotic arm system to ream the acetabulum and impact an acetabulur cup compared to manual instrumentation.

Increasing knee flexion following total knee arthroplasty (TKA) has become an important outcome measure. Surgical technique is one factor that can influence knee motion. In this study, it was hypothesised that stripping of the posterior knee capsule could improve flexion and range of motion (ROM) following TKA. Patients who were undergoing TKA were prospectively randomised into two groups - one group (62 patients) were allocated stripping of the posterior knee capsule (PCS), the other group (66 patients) no stripping (no-PCS). The primary outcome was change in flexion and ROM compared to pre-operative measurements at three time points; after wound closure, 3months and 1year post-operatively. Secondary outcomes were absolute measurements of flexion, extension, ROM and complications. All operations were performed by a single surgeon using the same implant and technique. All patients received identical post-operative rehabilitation. There was a significant gain in flexion after wound closure in the PCS group (p=0.022), however there was no significant difference at 3months or 1year post-operatively. Absolute values of extension (p=0.008) and flexion (p=0.001) 3months post-operatively were significantly reduced for the PCS group. The absolute value of ROM was significantly higher for the no-PCS group at 3months (p=0.0002) and 1year (p=0.005). There were no significant difference in the rate of complications. Posterior capsular stripping causes a transient increase in flexion that does not persist post-operatively. We do not recommend routine stripping of the posterior knee capsule in patients undergoing TKA.

Background

Tears of the rotator cuff are a common pathology and poorly understood. Achieving a good functional outcome for patients may be difficult, and the degree of fat infiltration into the muscle is known to be a major determining factor to surgical repair and post operative function. It is the hypothesis of this study that the degree of retraction of the common central tendon as seen on MRI corresponds to the amount of fat infiltration classified according to the Goutallier grading System.

Introduction

Antegrade K wiring of the fifth metacarpal for treatment of displaced metacarpal neck fractures is a well recognized surgical procedure. However it is not without complication and injury to the dorsal cutaneous branch of the ulnar nerve has been reported in up to 15% of cases.

Introduction

Dislocation is one of the most common complications following total hip arthroplasty. The literature suggests a frequency of 1–3% for primary total hip replacement (THR) and 7–10% for revision procedures. No definitive treatment algorithm exists for their management, with some surgeons attempting to constrain hip motion with casting or bracing initially. The evidence for this practice is limited. The purpose of this study was to determine the current practice for managing THR dislocation within our unit, and to determine the effectiveness of abduction bracing.

Purpose

In a previously published multicenter randomized clinical trial it was shown that young patients (16–60 years-old) with displaced mid-shaft clavicle fractures had superior limb specific outcomes when they were treated with primary plate fixation versus non operative treatment at one year follow-up. This study examines the general health status of this cohort of patients at two-years post injury.

Purpose

Platelet Rich Plasma (PRP) has been shown to have positive effect in tendon regeneration in in-vitro and limited in-vivo animal studies. We aim to study PRP use in acute Achilles tendon rupture (ATR) regeneration in a purposely designed clinical trial.

Purpose

To critically evaluate exciting new technology to reconstruct menisci for the treatment of post menisectomy pain and relate results to indication and surgical technique in a non-inventor's general knee practice.

Purpose of Study

To identify the degree of morphological change achievable following the Bereiter trochleoplasty and to establish whether these results are comparable with functional outcomes.

Postoperative sepsis is a costly and potentially devastating problem in total joint arthroplasty. Airborne bacteria and other viable microorganisms shed from surgical staff are a source of deep prosthetic infection, and the density of airborne bacteria is correlated with the rate of postoperative joint sepsis in total joint arthroplasty surgery. Previous studies have also reported a positive relationship between the density of nonviable airborne particulate and viable CFU counts, both airborne and in the surgical wound, during surgery. The purpose of this study was to determine the extent to which a system that delivers a small field of local, directed HEPA-filtered air flow over the surgical field reduces airborne particulate and airborne bacteria during total hip arthroplasty. A minimum of 8 subjects per group provided 80% power (a = 0.05) to detect a =75% difference in bacterial density between groups. All patients who consented to undergo primary total hip arthroplasty were eligible. Thirty-six patients were prospectively randomized into three groups: directed air flow, air flow system present but turned off (sham), and control (standard) conditions. Airborne particulate and bacteria were continuously collected in consecutive 10 minute intervals within 5 cm of the surgical wound using an air sampling device. Data were analyzed using a generalized linear model for repeated measures. Particulate counts and bacterial density at the surgical site were 80% lower on average in the directed air flow group compared to the other two groups (p<0.001) (Figure 1). Density of particulate >10 μm in diameter was strongly related to bacterial density at the surgical site (p<0.001), as was staff count (p<0.001) and bacterial density at a control site that was remote from the surgical field (p<0.001). The directed air flow system's effectiveness in reducing bacteria appears to be related to its ability to reduce particulate that may carry and allow proliferation of bacteria. The directed air flow system is relatively simple to use and does not appear to hinder the function of the surgeon or operating room staff, impede access to the surgical site, or interfere with the surgical procedure. The directed air flow system can be used in any operating room environment to provide clean air equivalent to a properly-used, well-functioning laminar air flow system. The directed air flow system was effective in reducing airborne particulate and bacteria in the surgical field during total hip arthroplasty.

Introduction

Recent gains in knowledge reveal that the ideal acetabular cup position is in a narrower range than previously appreciated and that position is likely different based on femoral component anteversion. For that reason more accurate acetabular cup positioning techniques will be important for contemporary THA. It is well known that malalignment of the acetabular component in THA may result in dislocation, reduced range of motion or accelerated wear. Up to 8% of THA patients have cups malaligned in version by more than ±10° outside of the Lewinnek safe zone. This type of malalignment may result in dislocation of the femoral head and instability of the joint within the first year, requiring reoperation. Reported incidences of reoperation are 1-9% depending on surgical skills and technique. In addition, cup malalignment is becoming increasingly important as adoption of hard on hard bearings increases as the success of large head hard on hard bearings seems to be more sensitive to cup positioning. This study reports the accuracy of a haptic robotic system to ream the acetabulum and impact an acetabular cup compared to manual instrumentation.

Introduction

Femoro-acetabular impingement (FAI) is a common source of impaired motion of the hip, often attributed to the presence of an aspherical femoral head. However, other types of femoral deformity, including posterior slip, retroversion, and neck enlargement, can also limit hip motion. This study was performed to establish whether the “cam” impinging femur has a single deformity of the head/neck junction or multiple abnormalities.

INTRODUCTION

Intramedullary nail fixation has been used for successful treatment of long bone fracture such as humerus, tibia and femur. We look at the experience of our trauma unit in treating long bone fracture using the AO approved Expert femoral/tibial nail and proximal femoral nail antirotation (PFNA). We look at the union and complication rates in patients treated with AO approved nailing system for pertrochanteric, femoral and tibial shaft fracture.

Background

Venous thromboembolism deterrent (TED) stockings are recommended for all orthopaedic patients. Clinical evidence supporting their use is limited and the risk of DVT increases four-fold if pressure gradients are reversed. This study aims to investigate the efficacy of TED stockings and their application using pressure gradients as the outcome measure.

Introduction

The use of platelet-rich concentrate (PRC) to enhance the healing response in tendon repair is currently an area of considerable interest. Activated platelets release a cocktail of growth factors and ECM regulating molecules. Previous work suggests that tenocytes are activated by contact with these clot-derived molecules. Our studies on tenocytes and PRC aim to establish the direct molecular and functional effects of PRC on tenocytes and to support the clinical research on Achilles tendon repair taking place within our group. We hypothesise that applying PRC to human tenocytes in culture will increase proliferation rate and survival by activating relevant signalling pathways.