Aims. The aim of this study was to assess the clinical and radiological outcomes of an antiprotrusio acetabular cage (APC) when used in the surgical treatment of periacetabular bone metastases. Methods. This retrospective cohort study using a prospectively collected database involved 56 patients who underwent acetabular reconstruction for periacetabular bone metastases or haematological malignancy using a single APC between January 2009 and 2020. The mean follow-up was 20 months (1 to 143). The primary outcome measure was implant survival. Postoperative radiographs were analyzed for loosening and failure. Patient and implant survival were assessed using a competing risk analysis. Secondary parameters included primary malignancy, oncological treatment, surgical factors, length of stay in hospital, and postoperative complications. Results. A total of 33 patients (59%) died during the study period at a mean of 15 months postoperatively (1 to 63). No patient had radiological evidence of loosening or failure. Acetabular component survival was 100%. Three patients (5.4%) had further surgery; one (1.8%) underwent revision of the femoral component for dislocation, one required debridement with implant retention for periprosthetic joint infection, and one required closed reduction for dislocation. Using death as a competing risk, at 100 months, the probability of revision was 0.036 and the risk of death was 0.84. Conclusion. With appropriate patient selection, the antiprotrusio cage offers good implant survival, with a reasonable perioperative complication rate in this high-risk group of patients when managing metastatic disease or haematological malignancy around the
Aims. Although periacetabular osteotomies are widely used for the treatment of symptomatic dysplastic hips, long-term surgical outcomes and patient-reported outcome measures (PROMs) are still unclear. Accordingly, we assessed hip survival and PROMs at 20 years after transpositional osteotomy of the
Aims. The aim of this study was to determine the clinical outcomes and factors contributing to failure of transposition osteotomy of the
Acetabulum fractures caused by civilian firearms represent a unique challenge for orthopaedic surgeons. Treatment strategies should include the assessment of infection risk due to frequently associated abdominal injuries and maintenance of joint function. Still, internationally accepted treatment algorithms are not available. The aim of the study was to increase knowledge about civilian gunshot fractures of the
Aims. Surgical approaches that claim to be minimally invasive, such as the direct anterior approach (DAA), are reported to have a clinical advantage, but are technically challenging and may create more injury to the soft-tissues during joint exposure. Our aim was to quantify the effect of soft-tissue releases on the joint torque and femoral mobility during joint exposure for hip resurfacing performed via the DAA. Methods. Nine fresh-frozen hip joints from five pelvis to mid-tibia cadaveric specimens were approached using the DAA. A custom fixture consisting of a six-axis force/torque sensor and motion sensor was attached to tibial diaphysis to measure manually applied torques and joint angles by the surgeon. Following dislocation, the torques generated to visualize the
Aims. Limb salvage for pelvic sarcomas involving the
Aims. To clarify the mid-term results of transposition osteotomy of the
In late developmental dysplasia of the hip in childhood, the deformed dysplastic
The bicompartmental
Aims. The aim of this study was to compare the biomechanical models of two frequently used techniques for reconstructing severe acetabular defects with pelvic discontinuity in revision total hip arthroplasty (THA) – the Trabecular Metal Acetabular Revision System (TMARS) and custom triflange acetabular components (CTACs) – using virtual modelling. Methods. Pre- and postoperative CT scans from ten patients who underwent revision with the TMARS for a Paprosky IIIB acetabular defect with pelvic discontinuity were retrospectively collated. Computer models of a CTAC implant were designed from the preoperative CT scans of these patients. Computer models of the TMARS reconstruction were segmented from postoperative CT scans using a semi-automated method. The amount of bone removed, the implant-bone apposition that was achieved, and the restoration of the centre of rotation of the hip were compared between all the actual TMARS and the virtual CTAC implants. Results. The median amount of bone removed for TMARS reconstructions was significantly greater than for CTAC implants (9.07 cm. 3. (interquartile range (IQR) 5.86 to 21.42) vs 1.16 cm. 3. (IQR 0.42 to 3.53) (p = 0.004). There was no significant difference between the median overall implant-bone apposition between TMARS reconstructions and CTAC implants (54.8 cm. 2. (IQR 28.2 to 82.3) vs 56.6 cm. 2. (IQR 40.6 to 69.7) (p = 0.683). However, there was significantly more implant-bone apposition within the residual
Although periacetabular osteotomies are widely used for the treatment of symptomatic acetabular dysplasia, the surgical outcomes after long term follow-up are still limited. Thus, we assessed hip survival and patient-reported outcomes (PROMs) at 20 years after the transposition osteotomy of
Aims. Accumulated evidence indicates that local cell origins may ingrain differences in the phenotypic activity of human osteoblasts. We hypothesized that these differences may also exist in osteoblasts harvested from the same bone type at periarticular sites, including those adjacent to the fixation sites for total joint implant components. Methods. Human osteoblasts were obtained from the
Background. CT-based navigation system in total hip arthroplasty(THA) is widely used to achieve accurate implant placement. The purpose of this study was to evaluate the influence of initial error correction according to the differences in the shape of the
Introduction. The success of total hip replacement (THR) is closely linked to the positioning of the acetabular component. Malalignment increases rates of dislocation, impingement, acetabular migration, pelvic osteolysis, leg length discrepancy and polyethylene wear. Many surgeons orientate the cup to inherent anatomy of the
The success of total hip replacement (THR) is closely linked to the positioning of the acetabular component. Malalignment increases rates of dislocation, impingement, acetabular migration, pelvic osteolysis, leg length discrepancy and polyethylene wear. Many surgeons orientate the cup in the same anteversion and inclination as the inherent anatomy of the
Thirty-four patients were studied through the whole of the Perthes’ disease in Alder Hey Children’s Hospital, Liverpool. The acetabular changes included osteopaenia of the roof, irregularity of its contour, and decrease in the depth. These changes were proportional to the femoral head involvement. The purpose of the study was to know the effect of the morphological changes of the femoral head on the
The purpose of this study is to determine how the lateral shape of the
Purpose of the study: Reconstruction of the
Benefits of early stabilization of femoral shaft fractures, in mitigation of pulmonary and other complications, have been recognized over the past decades. Investigation into the appropriate level of resuscitation, and other measures of readiness for definitive fixation, versus a damage control strategy have been ongoing. These principles are now being applied to fractures of the thoracolumbar spine, pelvis, and
Aims. Modular dual mobility (DM) prostheses in which a cobalt-chromium liner is inserted into a titanium acetabular shell (vs a monoblock acetabular component) have the advantage of allowing supplementary screw fixation, but the potential for corrosion between the liner and
Aims. The purpose of this retrospective study was to evaluate the minimum
five-year outcome of revision total hip arthroplasty (THA) using
the Kerboull acetabular reinforcement device (KARD) in patients
with Paprosky type III acetabular defects and destruction of the
inferior margin of the
This is a retrospective case review of 237 patients with displaced fractures of the
Purpose: Coxa magna is well known in Perthes’ disease but a quantitative evaluation of the early, in particular cartilaginous, enlargement of the femoral head and the necessary adaptive changes of the
Introduction. Success of total hip replacement (THR) is closely linked to positioning of the acetabular component. Malalignment increases complication rates. Our aim was to describe the anteversion and inclination of the inherent
Aims. The aim of this study is to evaluate whether acetabular retroversion (AR) represents a structural anatomical abnormality of the pelvis or is a functional phenomenon of pelvic positioning in the sagittal plane, and to what extent the changes that result from patient-specific functional position affect the extent of AR. Methods. A comparative radiological study of 19 patients (38 hips) with AR were compared with a control group of 30 asymptomatic patients (60 hips). CT scans were corrected for rotation in the axial and coronal planes, and the sagittal plane was then aligned to the anterior pelvic plane. External rotation of the hemipelvis was assessed using the superior iliac wing and inferior iliac wing angles as well as quadrilateral plate angles, and correlated with cranial and central acetabular version. Sagittal anatomical parameters were also measured and correlated to version measurements. In 12 AR patients (24 hips), the axial measurements were repeated after matching sagittal pelvic rotation with standing and supine anteroposterior radiographs. Results. Acetabular version was significantly lower and measurements of external rotation of the hemipelvis were significantly increased in the AR group compared to the control group. The AR group also had increased evidence of anterior projection of the iliac wing in the sagittal plane. The acetabular orientation angles were more retroverted in the supine compared to standing position, and the change in acetabular version correlated with the change in sagittal pelvic tilt. An anterior pelvic tilt of 1° correlated with 1.02° of increased cranial retroversion and 0.76° of increased central retroversion. Conclusion. This study has demonstrated that patients with symptomatic AR have both an externally rotated hemipelvis and increased anterior projection of the iliac wing compared to a control group of asymptomatic patients. Functional sagittal pelvic positioning was also found to affect AR in symptomatic patients: the
Aims. Developmental dysplasia of the hip (DDH) describes a pathological relationship between the femoral head and
We describe a little-known variety of hip dysplasia, termed ‘acetabular retroversion’, in which the alignment of the mouth of the
Aims. The aims of this study were to validate the Forgotten Joint Score-12 (FJS-12) in the postoperative evaluation of periacetabular osteotomy (PAO), identify factors associated with joint awareness after PAO, and determine the FJS-12 threshold for patient-acceptable symptom state (PASS). Methods. Data from 686 patients (882 hips) with hip dysplasia who underwent transposition osteotomy of the
Aims. The primary aim of this study is to assess the survival of the uncemented hydroxyapatite (HA) coated Trident II acetabular component as part of a hybrid total hip arthroplasty (THA) using a cemented Exeter stem. The secondary aims are to assess the complications, joint-specific function, health-related quality of life, and radiological signs of loosening of the acetabular component. Methods. A single-centre, prospective cohort study of 125 implants will be undertaken. Patients undergoing hybrid THA at the study centre will be recruited. Inclusion criteria are patients suitable for the use of the uncemented acetabular component, aged 18 to 75 years, willing and able to comply with the study protocol, and provide informed consent. Exclusion criteria includes patients not meeting study inclusion criteria, inadequate bone stock to support fixation of the prosthesis, a BMI > 40 kg/m. 2. , or THA performed for pain relief in those with severely restricted mobility. Results. Implant survival, complications, functional outcomes and radiological assessment up to ten years following index THA (one, two, five, seven, and ten years) will be performed. Functional assessment will include the Oxford Hip Score, Forgotten Joint Score, 12-Item Short Form Health Survey, EuroQol five-dimension health questionnaire, and pain and patient satisfaction. Radiological assessment with assess for acetabula lucent lines, lysis, and loosening according to DeLee and Charnley zones. Conclusion. This study is part of a stepwise introduction of a new device to orthopaedic practice, and careful monitoring of implants should be carried out as part of the Beyond Compliance principles. The results of this study will provide functional, radiological, and survival data to either support the ongoing use of the HA
A secure bone/cement interface at the bone cement junction is an important requirement for the long-term success in the cemented hip arthroplasty. Cementing techniques have evolved and now involve pressurisation of the
Various assumptions must be made during total hip replacement when placing the acetabular component within the reamed
We describe two patients aged 16 and 25 years with osteogenesis imperfecta who sustained displaced fractures of the
Aims. Slipped upper femoral epiphysis (SUFE) has well documented biochemical and mechanical risk factors. Femoral and acetabular morphologies seem to be equally important. Acetabular retroversion has a low prevalence in asymptomatic adults. Hips with dysplasia, osteoarthritis, and Perthes’ disease, however, have higher rates, ranging from 18% to 48%. The aim of our study was to assess the prevalence of acetabular retroversion in patients presenting with SUFE using both validated radiological signs and tomographical measurements. Methods. A retrospective review of all SUFE surgical cases presenting to the Royal Children’s Hospital, Melbourne, Australia, from 2012 to 2019 were evaluated. Preoperative plain radiographs were assessed for slip angle, validated radiological signs of retroversion, and standardized postoperative CT scans were used to assess cranial and mid-acetabular version. Results. In all, 116 SUFEs presented in 107 patients who underwent surgical intervention; 47 (52%) were male, with a mean age of 12.7 years (7.5 to 16.6). Complete radiological data was available for 91 patients (99 hips) with adequate axial CT imaging of both hips. Overall, 82 patients (82%) underwent pinning in situ (PIS), with subcapital realignment surgery (SRS) performed in 17 patients (18%) (slip angles > 75°). Contralateral prophylactic PIS was performed in 72 patients (87%). On the slip side, 62 patients (68%) had one or more radiological sign of retroversion. Tomographical acetabular retroversion was more pronounced cranially than caudally of the
Aims. Periacetabular osteotomy (PAO) is widely recognized as a demanding surgical procedure for acetabular reorientation. Reports about the learning curve have primarily focused on complication rates during the initial learning phase. Therefore, our aim was to assess the PAO learning curve from an analytical perspective by determining the number of PAOs required for the duration of surgery to plateau and the accuracy to improve. Methods. The study included 118 consecutive PAOs in 106 patients. Of these, 28 were male (23.7%) and 90 were female (76.3%). The primary endpoint was surgical time. Secondary outcome measures included radiological parameters. Cumulative summation analysis was used to determine changes in surgical duration. A multivariate linear regression model was used to identify independent factors influencing surgical time. Results. The learning curve in this series was 26 PAOs in a period of six months. After 26 PAO procedures, a significant drop in surgical time was observed and a plateau was also achieved. The mean duration of surgery during the learning curve was 103.8 minutes (SD 33.2), and 69.7 minutes (SD 18.6) thereafter (p < 0.001). Radiological correction of acetabular retroversion showed a significant improvement after having performed a total of 93 PAOs, including anteverting PAOs on 35 hips with a retroverted acetabular morphology (p = 0.005). Several factors were identified as independent variables influencing duration of surgery, including patient weight (β = 0.5 (95% confidence interval (CI) 0.2 to 0.7); p < 0.001), learning curve procedure phase of 26 procedures (β = 34.0 (95% CI 24.3 to 43.8); p < 0.001), and the degree of lateral correction expressed as the change in the lateral centre-edge angle (β = 0.7 (95% CI 0.001 to 1.3); p = 0.048). Conclusion. The learning curve for PAO surgery requires extensive surgical training at a high-volume centre, with a minimum of 50 PAOs per surgeon per year. This study defined a cut-off value of 26 PAO procedures, after which a significant drop in surgical duration occurred. Furthermore, it was observed that a retroverted morphology of the
Purpose: The distribution of weight bearing area within the
The JRI cemented total hip replacement consisted of an
Our study was designed to compare the effect of indometacin with that of a placebo in reducing the incidence of heterotopic ossification in a prospective, randomised trial. A total of 121 patients with displaced fractures of the
Fracture of the
Aims. In the native hip, the hip capsular ligaments tighten at the limits of range of hip motion and may provide a passive stabilizing force to protect the hip against edge loading. In this study we quantified the stabilizing force vectors generated by capsular ligaments at extreme range of motion (ROM), and examined their ability to prevent edge loading. Methods. Torque-rotation curves were obtained from nine cadaveric hips to define the rotational restraint contributions of the capsular ligaments in 36 positions. A ligament model was developed to determine the line-of-action and effective moment arms of the medial/lateral iliofemoral, ischiofemoral, and pubofemoral ligaments in all positions. The functioning ligament forces and stiffness were determined at 5 Nm rotational restraint. In each position, the contribution of engaged capsular ligaments to the joint reaction force was used to evaluate the net force vector generated by the capsule. Results. The medial and lateral arms of the iliofemoral ligament generated the highest inbound force vector in positions combining extension and adduction providing anterior stability. The ischiofemoral ligament generated the highest inbound force in flexion with adduction and internal rotation (FADIR), reducing the risk of posterior dislocation. In this position the hip joint reaction force moved 0.8° inbound per Nm of internal capsular restraint, preventing edge loading. Conclusion. The capsular ligaments contribute to keep the joint force vector inbound from the edge of the
Aims. Perthes’ disease is an idiopathic avascular necrosis of the developing femoral head, often causing deformity that impairs physical function. Current treatments aim to optimize the joint reaction force across the hip by enhancing congruency between the
Aims. The aim of this study was to understand the experience of mature patients who undergo a periacetabular osteotomy (PAO), a major hip-preserving surgical procedure that treats symptomatic hip dysplasia by realigning the
Over the past 40 years, the management of displaced fractures of the
We have divided Severin group-V severely dysplastic hips with a false into three subtypes, based on the height and shape of the socket. We performed rotational acetabular osteotomy (RAO) in 19 hips in 17 young adults with a type-1 ‘low’ false
Our aim was to evaluate the efficacy of a two-level reconstruction technique using subchondral miniscrews for the stabilisation of comminuted posterior-wall marginal acetabular fragments before applying lag screws and a buttress plate to the main overlying posterior fragment. Between 1995 and 2003, 29 consecutive patients with acute comminuted displaced posterior-wall fractures of the
The effects of NF-I on the hip have been underreported in literature. The bony changes in the hip can be mild to severe and are often present, but not diagnosed. Dislocation of the hip has been described but protrusio
Previous work has demonstrated vulnerability of the femoral nerve to damage by anterior acetabular retractors during THA. The aim of this study was to quantify the proximity of the femoral nerve to the anterior
Purpose: The surgical approach is an essential element for precise reduction and rigid fixation of fractures of the
Purpose: The use of femural head as an autograft in the reconstruction of dysplastic
1. A study of fifty-nine patients with protrusion of the
Transposition osteotomy of the
Introduction: Revision hip surgery is predicted to rise significantly over the coming decades. There is therefore likely to be an increasing need to overcome the large bone loss and cavitatory defects encountered in failed primary hip replacements. Impaction bone grafting (IBG) is a recognised technique for replacing lost bone stock. Achieving optimal graft impaction is a difficult surgical skill with a significant learning curve, balancing the need to achieve sufficient compaction to provide primary stability versus the need to keep impaction forces to a minimum to prevent iatrogenic fracture. In this study we have developed a revision acetabular model to test the hypothesis that the use of vibration and drainage with a new custom made perforated tamp could reduce the peak stresses imparted to the
The outcome of complex acetabular reconstruction was evaluated in twenty-one patients who were confined to a wheelchair or bed because of pain from acetabular metastases. Reconstruction rings were used where bone loss exceeded 50% of the
To assess clinical outcomes, metal ion levels, and periprosthetic femoral bone mineral density (BMD) in young, active patients receiving a modular dual mobility
Aim: The purpose of this work is to report the early results from medial protrusio technique for placement of acetabular component without cement in patients who have acetabular dysplasia. Material and Method: Thirty-two hip replacements were performed in thirty consecutive cases with dysplastic osteoarthritis between 2001 and 2003. In none of the patients an augmentation with bone or cement of the superolateral aspect of the
Pathological fractures due to metastasis with destruction of the
We carried out a morphometric analysis of the
Acetabular components of total hip joint replacement (THJR) in previously irradiated pelvis show high rates of failure. We present a literature review and a retrospective series evaluating the survival of acetabular cages in this difficult situation. Our hypothesis was that cage reinforcement of the
Background: It is thought that the forces transmitted across the hip joint produce migration of the prosthesis by failure at either the bone-cement or the prosthesis-cement interface. As symptoms associated with such motions often result from failure at the cement-bone interface, it is this interface and its sub-surfaces that are the critical areas of prosthesis loosening. Our aim is to produce a new and more accurate method of measuring strains at this critical interface. Objective: To develop in-vitro experiments to measure the strain distributions near the bone-cement interface of the
Long term clinical follow-up of total hip arthroplasty (THA) has identified problems associated with cyst formation. Such cysts are formed as a result of expansile osteolysis, which starts on a small area of the skeleton and spreads into the bone away from the surface of the prosthesis. Since large areas of the prosthesis are still in immediate contact with the skeleton the prosthesis is not loose and the patients are usually without pain. However this form of osteolysis may destroy large areas of the skeleton before it is detected and result in a sudden fracture due to a weakened skeleton. While there are some short term prospective trials that have shown changes in bone density in the periacetabular region, one needs a biomechanical model to understand factors that influence bone remodeling leading to cyst formation. This study aims to develop a mathematical model for studying the mechanical effects of bone cysts in the
Introduction: today there is still no consense in reconstruction of severe acetabular defects in hip revision. Since 1988 we use size matched impacted
Neglected fractures of the
Native anatomy of the arthritic hip is an important consideration in hip replacement surgery and implant design. Acetabular component orientation in total hip replacement (THR) is the single greatest factor that influences dislocation rate. Detailed knowledge regarding orientation of the native
In the First Department of Orthopaedics of St. Anna University Hospital in Brno, Czech Republic, a total number of 9,393 total hip replacements (THR) were performed from 1964 to 2000. Since 1986, the cementless technique has been used primarily for young patients suffering from late DDH. Within the last ten years we have implanted 5,574 THRs, including 440 cementless systems and 2,122 hybrid THRs. We focused on cases of patients with late DDH where dysplastic
Eighty patients who sustained a fracture of the floor of the
The patients with a total hip arthroplasty is growing in world manly in Europe and USA, and this solution present a high success at 10years in several orthopaedic registers. The application of total press-fit hip fixation presents the most used solution, but presents some failures associated to the acetabular component fixation, associated to the load transfer and bone loss at long term. The aim of this work is to investigate the influence of different acetabular bone loss in the strain distribution in iliac bone. To evaluate implant fixation, an experimental study was performed using acetabular press-fit component simulating different acetabular bone loss and measuring the strain distribution. The experimental samples developed was based in an iliac bone model of Sawbones supplier and a acetabular component Titanium (Stryker) in a condition press-fit fixation and was implanted according surgical procedure with 45º inclination angle and 20º in the anteversion angle. Were developed five models with same initial bone, one with intact condition simulating the cartilage between bones and four with different bone loss around the acetabular component. These four models representing the evolution of bone support of acetabular components presented in the literature. The evolution of bone loss was imposed with a CAD CAM process in same iliac bone model. The models were instrumented with 5 rosettes in critical region at the cortical bone to measure the strain evolution along the process.Introduction and Objective
Materials and Methods
Introduction. Acetabular bone deficiency, especially proximal and lateral deficiency, is a difficult technical problem during primary total hip arthroplasty (THA) in developmental hip dysplasia (DDH). We report a configuration-based classification of hip, including a definition of shallow
There remains uncertainty about the most effective surgical approach in the treatment of complex fractures of the
Purpose: The purpose of this study was to assess outcome after first-intention total hip arthroplasty for fresh fractures of the
Radiographs of 155 Indian children were examined to identify the acetabular changes which occur in Perthes' disease. These changes included osteoporosis of the acetabular roof, irregularity of contour, premature fusion of the triradiate cartilage, hypertrophy of articular cartilage and changes in dimensions. These changes tended to be more marked in older children and when more than half of the femoral epiphysis was involved. Comparison with 25 cases of Perthes' disease from Liverpool showed the same picture. Several of the acetabular changes noted during the active stages were also seen in a series of 24 adult hips after Perthes' disease. Radio-isotope scans of the hips of 27 children with Perthes' disease showed a consistently increased uptake in the
Objective. The optimal positioning of the acetabular component is a relevant prognostic factor in total hip arthroplasty (THA). Because of substantial errors of manual technique in cup placement even with experienced surgeon, computer aided navigation system has been developed in recent years. However, existence of the hardware around
Introduction: Pressurization of PMMA can lead to cement extrusion. Although rare, the complications related to cement extrusion (‘CE’) are serious such as neurological, urological and vascular injuries. In a recent study the incidence of CE from
Introduction: Osseointegration is known to occur around the uncemented acetabular cups which results in fill-in of peri-acetabular gaps. The objective of this study was to assess the gaps around uncemented acetabular cups radiologically in early post-operative period. Methods: 53 primary uncemented total hip arthroplasties were performed at our hospital by a single surgeon between February 2003 and august 2005. There were 29 females and 22 males. Two patients had bilateral surgeries. Mean age of patients was 70 years (range, 52–88 years). Primary osteoarthritis of the hip was the indication for surgery in all the patients. Peri-acetabular gaps were measured on the radiographs taken at day-1 post-operatively and at 3 months follow-up. All the measurements were taken independently by two investigators on two different occasions using a picture archiving &
communications (PACS) system. The two sets of data from each investigator were compared for intra and inter-observer variability using independent-samples t test. Results: in 24 cases, no gaps were found around the ace-tabular cups on day-1 post-operative radiographs. In 29 cases, the mean gap was 4 mm (range, 1–8 mm) on postoperative day-1. Five gaps were in zone one, 24 in zone two and none in zone three. At 3 months follow-up, the mean gap was found to be 0.6 mm (range, 0–3 mm). The reduction in gaps from day-1 post-op to 3 months follow-up was statistically significant (chi square test, p<
0.05). Discussion: We found a significant reduction in peri-acetabular gaps as early as at 3 months following uncemented total hip arthroplasties. We feel that settling of the cup within the
We aimed to identify variables associated with clinical and radiological outcome following fractures of the
The results of using the Ring uncemented polyethylene-to-metal (UPM) prosthesis in patients with protrusio acetabuli or dysplasia are reported. Fifty-four cases of protrusio were analysed and a modified method of measuring the deformity is described; after operation, remodelling of the medial wall had improved, on average, by 29.6%. For the dysplastic
Our aim in this prospective study was to compare the bone mineral density (BMD) around cementless acetabular and femoral components which were identical in geometry and had the same alumina modular femoral head, but differed in regard to the material of the acetabular liners (alumina ceramic or polyethylene) in 50 patients (100 hips) who had undergone bilateral simultaneous primary total hip replacement. Dual energy X-ray absorptiometry scans of the pelvis and proximal femur were obtained at one week, at one year, and annually thereafter during the five-year period of the study. At the final follow-up, the mean BMD had increased significantly in each group in acetabular zone I of DeLee and Charnley (20% (15% to 26%), p = 0.003), but had decreased in acetabular zone II (24% (18% to 36%) in the alumina group and 25% (17% to 31%) in the polyethylene group, p = 0.001). There was an increase in the mean BMD in zone III of 2% (0.8% to 3.2%) in the alumina group and 1% (0.6% to 2.2%) in the polyethylene group (p = 0.315). There was a decrease in the mean BMD in the calcar region (femoral zone 7) of 15% (8% to 24%) in the alumina group and 14% (6% to 23%) in the polyethylene group (p <
0.001). The mean bone loss in femoral zone 1 of Gruen et al was 2% (1.1% to 3.1%) in the alumina group and 3% (1.3% to 4.3%) in the polyethylene group (p = 0.03), and in femoral zone 6, the mean bone loss was 15% (9% to 27%) in the alumina group and 14% (11% to 29%) in the polyethylene group compared with baseline values. There was an increase in the mean BMD on the final scans in femoral zones 2 (p = 0.04), 3 (p = 0.04), 4 (p = 0.12) and 5 (p = 0.049) in both groups. There was thus no significant difference in the bone remodelling of the
The bone-marrow oedema syndrome is associated with local vascular disturbances and may be treated either conservatively or by core decompression after which recovery may take several weeks. We describe a 15-year-old girl with bone-marrow oedema of the left
We describe a patient in whom an initially intact sciatic nerve became rapidly encased in heterotopic bone formed in the abductor compartment after reconstruction of the posterior wall of the
Salter’s innominate osteotomy predisposes the hip to acetabular retroversion as it hinges upon the symphysis pubis. Retroversion is a recognised cause of osteoarthritis, hip pain and clinical signs of impingement, but there is uncertainty as to whether this over cover persists with growth and development. We reviewed the long-term follow up of twenty patients that had undergone a Salter’s osteotomy between 1985 to 1993 at The Royal Orthopaedic Hospital Birmingham or New Cross Hospital Wolverhampton. Sixteen skeletally mature patients were available for review that had previously had the pelvic osteotomy performed at a mean five years of age with a contralateral normal hip. Salter’s osteotomy had been performed for developmental dysplasia of the hip in 13 patients and for Perthes’ disease in three patients. Follow up was performed at an average age of 20 years. Outcome was assessed using the Harris Hip Score and a clinical examination for signs of impingement and by a measurement of acetabular version, on well centered pelvic radiograph. Acetabular version was evaluated by the relationship between anterior and posterior walls of both the normal and Salter
The purpose of current study was to describe the results of complex acetabular fractures treated with open reduction using transtrochanteric approach and arthrotomy of the hip joint. Fourteen consecutive patients with both column fractures of the
Introduction: This study was initiated to evaluate cortical and cancellous bone density (BD) changes of the
Introduction. The clinical and functional outcome following simultaneous fractures of the
Mal-positioning of the acetabular component is associated with increased dislocation rate, increased wear and component impingement. Navigation provides real time feedback to the surgeon and allows the accurate position of implants. Compared to conventional techniques of total hip replacement; use of the imageless navigation system has shown to improve accuracy of implant positioning. When impacting uncemented acetabular components under navigation, there is often a deviation from the planned abduction and anteversion measurement due to deflection of the implant in the reamed cavity. Although there exists the ability to navigate the reaming of the acetabular cavity; this is not widely performed. The ability to ream the acetabular cavity in the exact orientation of the planned acetabular component may provide some theoretical advantage on the final acetabular position. The purpose of this study was to compare the effect of navigated Vs free hand
We studied cartilage degeneration in 45 canine acetabula after implantation of prostheses with articulating surfaces of low-temperature isotropic (LTI) pyrolytic carbon, cobalt-chromium-molybdenum alloy and titanium alloy for periods ranging from two weeks to 18 months. Gross specimens and histological sections were compared with the nonoperated (control)
Studies of infant hip development to date have been limited by considering only the changes in appearance of a single ultrasound slice (Graf’s standard plane). We used 3D ultrasound (3DUS) to establish maturation curves of normal infant hip development, quantifying variation by age, sex, side, and anteroposterior location in the hip. We analyzed 3DUS scans of 519 infants (mean age 64 days (6 to 111 days)) presenting at a tertiary children’s hospital for suspicion of developmental dysplasia of the hip (DDH). Hips that did not require ultrasound follow-up or treatment were classified as ‘typically developing’. We calculated traditional DDH indices like α angle (αSP), femoral head coverage (FHCSP), and several novel indices from 3DUS like the acetabular contact angle (ACA) and osculating circle radius (OCR) using custom software.Aims
Methods
Introduction. Optimal alignment of the
Aims: The purpose of this study was to quantify the amount of cell viability and cartilaginous damage present in non-reparable human osteoarticular fragments removed at the time of acetabular fracture surgery. Material and Methods: The cases of 6 patients with comminuted fractures of the
In Revision-THR the great variability of acetabular defects requires a revision-cup-system, which enables the surgeon to treat even extensive unexspected bone losses with a load stable reconstruction during the surgery. For these cases a modular revision support cup (MRS-Titan) has been developed. It allows the reconstruction of the geometric rotation centre and prevents the applied autologous or homologous bone graft in the healing phase from overlaoding. Beyond that an individual adjustment of the differently large flexible straps guarantees the solid anchoring of the revision support cup to the vital bone. The individual anatomy can be preserved in every case of acetabular destruction due to the high range of modularity the system provides. Because of the intraoperatively synthesis of all parts of the MRS-cup the approach and the traumatization of the soft tissue can be minimized. Since 1995 we implanted 95 MRS-Titan-cups out of 250 which were implanted world wide. In all cases a stable anchoring of the implant has been reached. We will report about our own follow-up and complications. In 4 MRS revisions a revitalized acetabular bone graft has been found able to host a noncemented hemispherical cup in three cases. Conclusion: The MRS-System is able to bridge mechanically stable damaged or missing parts of the
Manual impaction, with a mallet and introducer, remains the standard method of installing cementless acetabular cups during total hip arthroplasty (THA). This study aims to quantify the accuracy and precision of manual impaction strikes during the seating of an acetabular component. This understanding aims to help improve impaction surgical techniques and inform the development of future technologies. Posterior approach THAs were carried out on three cadavers by an expert orthopaedic surgeon. An instrumented mallet and introducer were used to insert cementless acetabular cups. The motion of the mallet, relative to the introducer, was analyzed for a total of 110 strikes split into low-, medium-, and high-effort strikes. Three parameters were extracted from these data: strike vector, strike offset, and mallet face alignment.Aims
Methods
The aim of the study was to investigate whether the primary stability of press-fit acetabular components can be improved by altering the impaction procedure. Three impaction procedures were used to implant acetabular components into human cadaveric acetabula using a powered impaction device. An impaction frequency of 1 Hz until complete component seating served as reference. Overimpaction was simulated by adding ten strokes after complete component seating. High-frequency implantation was performed at 6 Hz. The lever-out moment of the acetabular components was used as measure for primary stability. Permanent bone deformation was assessed by comparison of double micro-CT (µCT) measurements before and after impaction. Acetabular component deformation and impaction forces were recorded, and the extent of bone-implant contact was determined from 3D laser scans.Aims
Methods
Background: We examined the role of the geometry of
We describe a 15-year-old boy with a posterior dislocation of the hip, fracture of the posterior column of the
Introduction: today there is still no consense in reconstruction of severe acetabular defects in hip revision. Since 1988 we use size matched impacted
Post-traumatic periprosthetic acetabular fractures are rare but serious. Few studies carried out on small cohorts have reported them in the literature. The aim of this work is to describe the specific characteristics of post-traumatic periprosthetic acetabular fractures, and the outcome of their surgical treatment in terms of function and complications. Patients with this type of fracture were identified retrospectively over a period of six years (January 2016 to December 2021). The following data were collected: demographic characteristics, date of insertion of the prosthesis, details of the intervention, date of the trauma, characteristics of the fracture, and type of treatment. Functional results were assessed with the Harris Hip Score (HHS). Data concerning complications of treatment were collected.Aims
Methods
Introduction: This paper describes the results of treatment of THA in irradiated hips, and analyzes the risk factors related to the early failure of the acetabular components. Materials and Methods: Eighteen primary total hip arthroplasties (twelve patients) were analyzed. The mean follow-up period was fifty-eight months (range, twenty to 139 months). The acetabular components were of hemispherical design with an ingrowth surface of titanium fiber-metal in fourteen cases and roof rings in four cases. Risk factors were analyzed between age, total radiation dose, onset of symptoms after irradiation (≤ 4 years, >
4 years), and the risk of failure in the acetabular components after THA. Results: When only nine cases of failure were considered, the interval from operation to failure had a positive association with total radiation dose and a negative association with the ages of the affected patients or the latent period before onset of symptoms. When all the cases were included in the survival analyses, the survival rates did not depend on either patient age or total radiation dose. The latent period was significantly related to the survival rate with a cutoff point of four years (p = 0.03). After age, total radiation dose, and component type were adjusted, the risk of failure was fifteen times higher (95% confidence interval: 1.03–227.44) in patients ≥ 4 years of the latent period, compared to those <
4 years of the latent period. Conclusions: It is suggested that any arthroplasty other than a resection arthroplasty is unwise if the portal of irradiation includes the
This study aimed to evaluate the accuracy of implant placement with robotic-arm assisted total hip arthroplasty (THA) in patients with developmental dysplasia of the hip (DDH). The study analyzed a consecutive series of 69 patients who underwent robotic-arm assisted THA between September 2018 and December 2019. Of these, 30 patients had DDH and were classified according to the Crowe type. Acetabular component alignment and 3D positions were measured using pre- and postoperative CT data. The absolute differences of cup alignment and 3D position were compared between DDH and non-DDH patients. Moreover, these differences were analyzed in relation to the severity of DDH. The discrepancy of leg length and combined offset compared with contralateral hip were measured.Aims
Methods
We aimed to investigate the clinical consequences of intraoperative acetabular fractures. Between 2003 and 2012, a total of 3391 cementless total hip arthroplasties (THA) were performed at the Dept. of Orthopaedics, Innsbruck Medical University. Of those, a total of 160 patients underwent a CT scan within 30 days postoperatively. The scans of 44 patients were not suitable for analyse due to thick scan layers. Of the remaining 116 patients, 76 had a fracture. Reasons for CT-scans were suspected bleeding, hip pain, abdominal symptoms, etc. The fractures included 59 isolated acetabular fractures, the rest of fractures was in the superior or inferior pubic ramus or the tuber ischiadicum. Four cases out of the 59 acetabular fractures underwent revision surgery due to periprosthetic joint infection after 0, 2, 10 and 23 months. Four patients underwent revision due to cup loosening after 13 and 14 days as well as after 16 and 24 months. Of those, three showed a central acetabular fracture with protrusion. In 33 of the remaining 51 patients, a minimum of 3 x-rays was available for migration analysis with EBRA. In 6 patients, the x-rays were not comparable to each other. The 27 remaining acetabular fractures were categorised according to AO classification in 62A1 (1; posterior wall), 62A2 (16; posterior column), 62A3 (6; anterior wall), and others (4). Four hips showed initial migration of more than 3 mm in the first 6 months. One had a central fracture, and was lost for follow-up after 8 months. Two had an anterior column fracture and showed no further migration after 6 months. One showed also a radiolucency of more than 2 mm in all 3 zones and was lost for follow-up. We conclude that intraoperative acetabular fractures occur more often than we expected. Fractures of the acetabular ring involving one column do not seem to compromise the long-term stability of the implant. Central fractures required revision or showed loosening proved by high cup migration.
Aseptic loosening of the acetabular component continues to be the most common indication for revision of total hip replacements in younger patients. Early in the evolution of the cemented hip, arthroplasty surgeons switched from removal to retention of the acetabular subchondral bone plate, theorising that unfavourable mechanical forces were the cause of loosening at the bone-cement interface. It is now known that the cause of aseptic loosening is probably biological rather than mechanical and removing the subchondral bone plate may enhance biological fixation of cement to bone. With this in mind, perhaps it is time to revive removal of the subchondral bone as a standard part of acetabular preparation.
Aims: The purpose of this study is to review eight to eleven year results of a consecutive series of primary hybrid total hip arthroplasties. Methods: 193 patients (197 hips) received a cemented, polished, collarless, femoral component (Ra=1) in association with an uncemented acetabular component (166 grit-blasted titanium ßexible, 17 Ti mesh, and 14 Standard porous cups). Results: Mean age at surgery was 69.5 years (51–90). Most frequent diagnosis was osteoarthritis. Average follow-up was 9.2 years (8.5 to 11.2). 21 patients (23 hips) were lost to follow-up. 24 patients (25 hips) died prior to eight-years and none had undergone revision. Two femoral components, the only two with Grade D cement mantles, were revised for aseptic loosening at 23 and 111mos. One Ti mesh socket was revised for catastrophic poly wear at 113m and one ßexible cup for dislocation at 111m. The remaining 146 stems and cups were available for minimum 8year clinical review. 62 underwent complete radiographic review. Conclusions: Post-op Harris score was 89.3 (68–100). Pain relief was good or excellent in 95% of patients. X-rays revealed 1–2mm of femoral subsidence in 6 hips. Two cases of proximal (zones 7 and 1) femoral osteolysis were identiþed. A cemented polished femoral component and an uncemented
We performed total hip replacement on 25 congenitally dislocated hips using corticocancellous bone from the femoral neck as a bone graft to reconstruct the deficient
The aim of this modified Delphi process was to create a structured Revision Hip Complexity Classification (RHCC) which can be used as a tool to help direct multidisciplinary team (MDT) discussions of complex cases in local or regional revision networks. The RHCC was developed with the help of a steering group and an invitation through the British Hip Society (BHS) to members to apply, forming an expert panel of 35. We ran a mixed-method modified Delphi process (three rounds of questionnaires and one virtual meeting). Round 1 consisted of identifying the factors that govern the decision-making and complexities, with weighting given to factors considered most important by experts. Participants were asked to identify classification systems where relevant. Rounds 2 and 3 focused on grouping each factor into H1, H2, or H3, creating a hierarchy of complexity. This was followed by a virtual meeting in an attempt to achieve consensus on the factors which had not achieved consensus in preceding rounds.Aims
Methods