Aims. The current evidence comparing the two most common approaches for reverse total shoulder arthroplasty (rTSA), the deltopectoral and
The shape of the glenoid can vary between pear and oval, depending on the presence of a glenoid notch. We measured the glenoid notch angle (the angle between the superior and inferior part of the anterior glenoid rim) in 53 embalmed cadavers and investigated its relationship with the labral attachment to the glenoid at that point. The attachment of the
Aims. Acetabular edge-loading was a cause of increased wear rates in metal-on-metal hip arthroplasties, ultimately contributing to their failure. Although such wear patterns have been regularly reported in retrieval analyses, this study aimed to determine their in vivo location and investigate their relationship with acetabular component positioning. Methods. 3D CT imaging was combined with a recently validated method of mapping bearing surface wear in retrieved hip implants. The asymmetrical stabilizing fins of Birmingham hip replacements (BHRs) allowed the co-registration of their acetabular wear maps and their computational models, segmented from CT scans. The in vivo location of edge-wear was measured within a standardized coordinate system, defined using the anterior pelvic plane. Results. Edge-wear was found predominantly along the superior acetabular edge in all cases, while its median location was 8° (interquartile range (IQR) -59° to 25°) within the
The advent of modular porous metal augments has ushered in a new form of treatment for acetabular bone loss. The function of an augment can be seen as reducing the size of a defect or reconstituting the
The October 2023 Shoulder & Elbow Roundup. 360. looks at: Arthroscopic capsular shift surgery in patients with atraumatic shoulder joint instability: a randomized, placebo-controlled trial; Superior capsular reconstruction partially restores native glenohumeral loads in a dynamic model; Gene expression in glenoid articular cartilage varies in acute instability, chronic instability, and osteoarthritis; Intra-articular injection versus interscalene brachial plexus block for acute-phase postoperative pain management after arthroscopic shoulder surgery; Level of pain catastrophizing rehab in subacromial impingement: secondary analyses from a pragmatic randomized controlled trial (the SExSI Trial);
Abstract. OBJECTIVES. Although surgical periacetabular osteotomy (PAO) for hip dysplasia aims to optimise acetabular coverage and restore hip function, it is unclear how surgery affects capsular mechanics and joint stability. The purpose was to examine how the reoriented acetabular coverage affects capsular mechanics and joint stability in dysplastic hips. METHODS. Twelve cadaveric dysplastic hips (n = 12) were denuded to the capsule and mounted onto a robotic tester. The robot positioned each hip in multiple flexion angles (Extension, Neutral 0°, Flexion 30°, Flexion 60°, Flexion 90°) and performed internal-external rotations and abduction-adduction to 5 Nm in each rotational or planar direction. Each hip underwent a PAO, preserving the capsule, and was retested postoperatively in the robot. Paired sample t-tests compared the range of motion before and after PAO surgery (CI = 95%). RESULTS. Pre-operatively, the dysplastic hips demonstrated large ranges of internal-external rotations and abduction-adduction motions throughout all flexion positions. Post-operatively, the PAO slackenend the
While reverse shoulder arthroplasty (RSA) is a reliable treatment option for patients with rotator cuff deficiency, loss of glenoid baseplate fixation often occurs due to screw loosening. We questioned whether an analysis of the trabecular bone density distribution in the scapula would indicate more optimal sites for screw placement. As such, the purpose of this study was to determine the anatomic distribution of trabecular bone density in regions of the scapula available for screw placement in RSA. Seven cadaveric shoulders were computed tomography (CT) scanned, and then voxels of the scapulae were isolated from the CT volume (Mimics 15.0 Materialise, Leuven, Belgium). Analyses were conducted in a common, 3D coordinate system. Volumetric regions of interest (ROI) within the scapula were identified based on potential baseplate screw sites. ROIs included areas at the base of the coracoid process lateral and inferior to the suprascapular notch, in the posterior and anterior lateral spine and in the
We analysed 54 alumina ceramic-on-ceramic bearings
from total hip replacements retrieved at one centre after a mean
duration of 3.5 years (0.2 to 10.6) in situ. These
implants were obtained from 54 patients (16 men and 38 women) with
a mean age of 67 years (33 to 88) who underwent revision for a variety
of reasons. Posterior edge loading was found in the majority of
these retrievals (32 out of 54).
The purpose of this study is to quantify the distribution of bone density in the scapulae of patients undergoing reverse shoulder arthroplasty (RSA) to guide optimal screw placement. To achieve this aim, we compared bone density in regions around the glenoid that are targeted for screw placement, as well as bone density variations medial to lateral within the glenoid. Specimen included twelve scapula in 12 patients with a mean age of 74 years (standard deviation = 9.2 years). Each scapula underwent a computed tomography (CT) scan with a Lightspeed+ XCR 16-Slice CT scanner (General Electric, Milwaukee, USA). Three-dimensional (three-D) surface mesh models and masks of the scapulae containing three-D voxel locations along with the relative Hounsfield Units (HU) were created. Regions of interest (ROI) were selected based on their potential glenoid baseplate screw positioning in RSA surgery. These included the base of coracoid inferior and lateral to the suprascapular notch, an anterior and posterior portion of the scapular spine, and an
We carried out a morphometric analysis of the acetabulum following Dega osteotomy in patients with cerebral palsy using three-dimensional CT. We assessed 17 acetabula in 12 patients with instability of the hip. A Dega osteotomy and varus derotation femoral osteotomy were performed in all 17 hips. Three-dimensional CT scans were taken before and approximately one year after operation. Acetabular cover was evaluated using
Femoroacetabular impingement (FAI) – enlarged, aspherical femoral head deformity (cam-type) or retroversion/overcoverage of the acetabulum (pincer-type) – is a leading cause for early hip osteoarthritis. Although anteverting/reverse periacetabular osteotomy (PAO) to address FAI aims to preserve the native hip and restore joint function, it is still unclear how it affects joint mobility and stability. This in vitro cadaveric study examined the effects of surgical anteverting PAO on range of motion and capsular mechanics in hips with acetabular retroversion. Twelve cadaveric hips (n = 12, m:f = 9:3; age = 41 ± 9 years; BMI = 23 ± 4 kg/m2) were included in this study. Each hip was CT imaged and indicated acetabular retroversion (i.e., crossover sign, posterior wall sign, ischial wall sign, retroversion index > 20%, axial plane acetabular version < 15°); and showed no other abnormalities on CT data. Each hip was denuded to the bone-and-capsule and mounted onto a 6-DOF robot tester (TX90, Stäubli), equipped with a universal force-torque sensor (Omega85, ATI). The robot positioned each hip in five sagittal angles: Extension, Neutral 0°, Flexion 30°, Flexion 60°, Flexion 90°; and performed hip internal-external rotations and abduction-adduction motions to 5 Nm in each position. After the intact stage was tested, each hip underwent an anteverting PAO, anteverting the acetabulum and securing the fragment with long bone screws. The capsular ligaments were preserved during the surgery and each hip was retested postoperatively in the robot. Postoperative CT imaging confirmed that the acetabular fragment was properly positioned with adequate version and head coverage. Paired sample t-tests compared the differences in range of motion before and after PAO (CI = 95%; SPSS v.24, IBM). Preoperatively, the intact hips with acetabular retroversion demonstrated constrained internal-external rotations and abduction-adduction motions. The PAO reoriented the acetabular fragment and medialized the hip joint centre, which tightened the iliofemoral ligament and slackenend the pubofemoral ligament. Postoperatively, internal rotation increased in the deep hip flexion positions of Flexion 60° (∆IR = +7°, p = 0.001) and Flexion 90° (∆IR = +8°, p = 0.001); while also demonstrating marginal decreases in external rotation in all positions. In addition, adduction increased in the deep flexion positions of Flexion 60° (∆ADD = +11°, p = 0.002) and Flexion 90° (∆ADD = +12°, p = 0.001); but also showed marginal increases in abduction in all positions. The anteverting PAO restored
Object. CT-based navigation system in total hip arthroplasty(THA) is widely used to achieve accurate implant placement. However, its internal structure was a trade secret. Therefore, it was hard to analyze optimal reference points. Now, we developed our own CT-based navigation system originally, and since then we have been conducting various analyses in order to use the system more effectively. The purpose of this study was to analyze the optimal area and the number of registration points, which enables to move initial errors into the acceptable range. Methods. We set the anterior pelvic plane(APP) as the reference plane, and defined the coordinates as follows: X-axis for external direction, Y-axis for anterior direction, and Z-axis for proximal direction. We made pelvic bone models after THA, a normal shape and acetabular dysplasia model, and performed registration using an originally developed CT based navigation system. At first, we registered point paired matching at 4 points, and surface matching was performed at 53 points, which were placed around the acetabulum. 20 points were on
Aims. Asphericity of the femoral head-neck junction is common in cam-type
femoroacetabular impingement (FAI) and usually quantified using
the alpha angle on radiographs or MRI. The aim of this study was
to determine the natural alpha angle in a large cohort of patients
by continuous circumferential analysis with CT. Methods. CT scans of 1312 femurs of 656 patients were analyzed in this
cross-sectional study. There were 362 men and 294 women. Their mean
age was 61.2 years (18 to 93). All scans had been performed for
reasons other than hip disease. Digital circumferential analysis
allowed continuous determination of the alpha angle around the entire
head-neck junction. All statistical tests were conducted two-sided;
a p-value < 0.05 was considered statistically significant. Results. The mean maximum alpha angle for the cohort was 59.0° (. sd. 9.4).
The maximum was located
Introduction. Definition-in this presentation, the discussion will not include reparable cuff deficiency, as this is handled with standard arthroplasty techniques combined with cuff repair. Factors that affect decision-making. Kinematics-fixed fulcrum or not. Bone loss. Deltoid integrity. Coracoacromial arch integrity. Age. Activity level. Options. Hemiarthroplasty. “ Extended head” hemiarthroplasty. Arthroplasty + tendon transfer. Constrained arthroplasty – currently not FDA approved in USA. Arthrodesis. Evaluation. History and physical examination. ? Prior surgery. ? Overhead function – does fixed-fulcrum kinematics exist even if the head is not centred. ?
The treatment of severe acetabular bone loss is challenging, especially in the setting of an associated chronic pelvic discontinuity. There are several available treatment options for chronic pelvic discontinuity, each of which has its own disadvantages. One of the major difficulties with this entity, regardless of the reconstructive technique chosen, is the inability to obtain reproducible healing of the discontinuity. We evaluated the use of acetabular distraction, a technique which achieves peripheral or lateral distraction and central or medial compression across the discontinuity. We recommend acetabular distraction to allow for implantation of a stable construct, achieve biologic fixation and increase the likelihood of discontinuity healing. In this multi-center trial, 32 patients that underwent acetabular revision for a chronic pelvic discontinuity using acetabular distraction were radiographically evaluated at a minimum of 25 months (range, 25 to 160 months). The study cohort was categorized according to the Paprosky acetabular bone loss classification: seven (22%) type IIC, five (16%) type IIIA, and 20 (62%) type IIIB defects. Fourteen (70%) of the 20 patients with a type IIIB acetabular bone loss pattern required use of augments for acetabular reconstruction. Of the 32 patients, 1 (3%) patient required a revision for aseptic loosening, 2 (6%) patients had evidence of radiographic loosening but were not revised, and 3 (9%) patients had migration of the acetabular component into a more stable position. Radiographically, 22 (69%) of the cohort demonstrated healing of the discontinuity. The Kaplan-Meier construct survivorship was 83.3% when using aseptic acetabular loosening as an end-point. During this study, the authors created a new pelvic discontinuity classification based on the type of reconstruction required. The classification mirrors the Paprosky acetabular bone loss classification. A Type I chronic pelvic discontinuity required jumbo cup reconstruction without augments. A type II discontinuity required the use of an augment for an extracavitary defect. A type III discontinuity required an augment for an intracavitary defect. Type III defects were further subdivided into type IIIA and IIIB discontinuity. Type IIIA discontinuities utilized an augment to reconstruct the
Acetabular bone loss is a challenging problem
facing the revision total hip replacement surgeon. Reconstruction
of the acetabulum depends on the presence of
In diagnosis and repair of partial subscapularis tendon tears, we used a simplified arthroscopic direct technique. We used the
Objectives. Our principle is to bring the socket back to the true acetabulum position. A large structural bone graft is required for severe subluxation. We obtained good long-term results with structural bone grafts. It is necessary to evaluate the bone graft 3 dimensionally, not 2 dimensionally. M and M. We evaluated our 305 primary THAs operated from April 2010 to Mar 2014. Structural bone grafts were utilized on the acetabulum in 39 cases (12.8%). We measured the CE angle on post-operative plain coronal x-rays. 3D-CT evaluation was carried out on the cases with CE angles of 0 degrees or less. We checked the position of the graft and see how much surface area the graft occupies of the total area that receives the load. Result. Mean CE angle on the post-op plain coronal x-rays was −1.5°. 15 cases (38.5%) had 0 degree or less CE angles on the post-op plain coronal x-rays. 11 cases (−15°≤CE<0°), and 4 cases (−30°≤CE<−15°). Mean CE angle was +3.7° on coronal CT of the apex of the socket. Graft position on the acetabulum on 3D-CT was
Glenoid failure remains the most common mode of total shoulder arthroplasty failures. Porous tantalum metal (Trabecular Metal™, Zimmer) have grown in popularity in hip and knee arthroplasty. First-generation porous tantalum metal-backed glenoid components demonstrated metal debris, resulted in failure, and were revised to second-generation glenoid implants. Evidence for second-generation porous tantalum metal implants in shoulder arthroplasty is sparse.1–4 The purpose of this study was to assess clinical and radiographic outcomes in a series of patients with second-generation porous tantalum glenoid components at a minimum two-years postoperative. We retrospectively reviewed the clinical and radiographic outcomes of patients who received a second-generation porous tantalum glenoid component anatomic shoulder arthroplasty between May 2009 and December 2017 with minimum 24 months follow-up. The shoulder arthroplasties were performed by one of two senior fellowship-trained surgeons. We collected postoperative clinical outcome indicators: EQ5D visual analog scale (VAS), Western Ontario Osteoarthritis of the Shoulder (WOOS) Index, American Shoulder and Elbow Surgeons (ASES) Score, and Constant Score (CS). Radiographic review was performed by an independent fellowship-trained surgeon. The Endrizzi metal debris grading system1 was utilized to grade metal debris. We computed descriptive statistics and compared outcome scores between groups via the non-parametric Wilcoxon rank-sum test, with group-wise comparisons defined by: metal debris and humeral head migration (secondary analyses). Thirty-five patients [23 male (65.7%) and 12 female (34.3%)] with 40 shoulder replacements participated in the study. Forty of 61 shoulders (65.6%) had an average of 64 ± 20.3 months follow-up (range 31 to 95). Average BMI was 27.5 ± 4.4 kg/m2 (range 19.5 to 39.1). The average postoperative EQ5D VAS at final follow-up was 74.6 ± 22.5, WOOS Index 87.9 ± 16.6, ASES Score 88.3 ± 10.9, and CS 80.4 ± 13. At final follow-up, 18 of 40 shoulders (45%) had metal debris [15 of 40 (37.5%) Endrizzi grade 1 and three of 40 (7.5%) Endrizzi grade 2], and 22 of 40 shoulders (55%) did not show evidence of metal debris. There was one non-revision reoperation (open subscapularis exploration), one shoulder with
Although good to excellent short-term results
of arthroscopic partial limbectomy of the hip have been reported, there
is little information on the long-term outcome of the procedure.
We report a case with a 16-year follow-up. A 34-year old woman presented with a three-month history of severe
pain and limitation of movement of the hip. Plain radiographs and
arthrography showed no abnormality. MRI showed an effusion and a
deformity of the
Recently, femoroacetabular impingement has been recognised as a cause of early osteoarthritis. There are two mechanisms of impingement: 1) cam impingement caused by a non-spherical head and 2) pincer impingement caused by excessive acetabular cover. We hypothesised that both mechanisms result in different patterns of articular damage. Of 302 analysed hips only 26 had an isolated cam and 16 an isolated pincer impingement. Cam impingement caused damage to the
Introduction. Subchondral insufficiency fracture of the femoral head (SIF) is a recently proposed concept. It is generally seen in elderly people, however, some young adults have also been reported to suffer from this fracture. The purpose of this study was to investigate the clinical results of a transtrochanteric anterior rotational osteotomy (ARO) performed in young adults with SIF. Methods. This study focused on young SIF cases (age range from 10 to 29 years). Five patients were diagnosed to have SIF at our institution and conservative treatment was initially performed. The symptoms resolved in 1 case while the other 4 cases showed progression of a collapse. In these 4 cases, ARO was performed, since the fractured area was located in the
In order to determine the potential for an internervous safe zone, 20 hips from human cadavers were dissected to map out the precise pattern of innervation of the hip capsule. The results were illustrated in the form of a clock face. The reference point for measurement was the inferior acetabular notch, representing six o’clock. Capsular branches from between five and seven nerves contributed to each hip joint, and were found to innervate the capsule in a relatively constant pattern. An internervous safe zone was identified
Introduction. Different classification systems for acetabular deficiencies, including AAOS and Paprosky, are commonly used. Classification of these bone defects is often performed based on Xrays or CT images. Although the amount of bone loss is rarely measured quantitatively in these images, objective and quantitative data on the degree of bone loss could facilitate correct and consistent classification. Recently, a computerized CT-based tool was presented to quantitatively asses bone loss: TrABL (Total radial Acetabular Bone Loss). This study demonstrates on an extended patient population that TrABL combined with standard classification systems provides more detailed, quantitative information on bone defects. Methods. CT scans of 30 severe acetabular defects, classified Paprosky IIIA and IIIB, were collected and analysed with TrABL. The tool automatically calculated the total amount of bone that was missing around the acetabulum, seen from the hip's original rotation centre. Six anatomical regions were defined for which the degree of bone loss was expressed:
Introduction. Bracing, a strategy employed by humans and robotic devices, can be generally described as a parallel mechanical link between the actor, the environment, and/or the workpiece that alters the mechanical impedance between the tool and workpiece in order to improve task performance. In this study we investigated the potential value of bracing in the context of bone milling to treat cam-type femoroacetabular impingement (FAI) lesions. The goal of this study was to evaluate whether a proposed bracing technique could enable a user to perform a cam resection more accurately and quickly than a currently employed arthroscopic technique. Materials/Methods. Test samples consisted of white urethane plastic reproductions of a commercially available adult proximal femur, which were laser scanned to obtain ground-truth surface information. A black cam lesion was then cast onto the surface of the femur in the
Damage to and repair of the acetabular labral-chondral complex are areas of clinical interest in the treatment of young adults with pain in the hip and in the prevention of degenerative arthritis of the hip. There are varying theories as to why most acetabular tears are located
Summary. The dGEMRIC index correlates more strongly with the pattern of radiographic joint space narrowing in hip osteoarthritis at five year follow-up than morphological measurements of the proximal femur. It therefore offers potential to refine predictive models of hip osteoarthritis progression. Introduction. Longitudinal general population studies have shown that femoroacetabular impingement increases the risk of developing hip osteoarthritis, however, morphological parameters have a low positive predictive value. Arthroscopic debridement of impingement lesions has been proposed as a potential strategy for the prevention of osteoarthritis, however, the development of such strategies requires the identification of individuals at high risk of disease progression. We investigated whether delayed Gadolinium-Enhanced MRI of Cartilage (dGEMRIC) predicts disease progression. This imaging modality is an indirect measure of cartilage glycosaminoglycan content. Patients and Methods. 34 asymptomatic individuals from a longitudinal cohort study (sibkids) were assessed at baseline with the collection of Patient Reported Outcome Measures (PROMs), anteroposterior and cross-table lateral radiographs, 3D morphological MRI, and dGEMRIC at 3T of their index hip. A dGEMRIC index was calculated as a ratio of the
Reverse shoulder arthroplasty is becoming a frequent treatment of choice for patients with shoulder disorders. Complication rates after reverse shoulder arthroplasty may be three-fold that of conventional total shoulder arthroplasty especially in high risk patient populations and diagnoses like revision arthroplasty, fracture sequelae, and severe glenoid bone loss. Complications include component malposition, stiffness, neurological injury, infection, dislocation or instability, acromial or scapular spine fractures, scapular notching, and loosening of implants. Recognition of preoperative risk factors and appropriate 3D planning are essential in optimizing patient outcome and intraoperative success. Failure of reverse shoulder arthroplasty is a significant challenge requiring appropriate diagnosis of the failure mode. The most common neurological injuries involve the brachial plexus and the axillary nerve due to traction, manipulation of the arm, aberrant retractor placement, or relative lengthening of the arm. Intraoperative fractures are relatively uncommon but include the greater tuberosity, acromion, and glenoid. Tuberosity fracture can be repaired intraoperatively with suture techniques, glenoid fractures may be insignificant rim fractures or jeopardise baseplate fixation and require abandoning RSA until glenoid fracture ORIF heals and then a second stage RSA. Periprosthetic infection after RSA ranges from 1 to 10% and may be higher in revision cases and frequently is Propionibacterium acnes and Staphylococcus epidermidis. Dislocation was one of the most common complications after RSA approximately 5% but with increased surgeon experience and prosthetic design, dislocation rates are approaching 1–2%. An
Purpose of the study: Although the association between femoroacetabular impingement and degenerative hip disease has been well established, there is no way to detect a subgroup of hips with radiographic signs of impingement which will progress to degeneration. In addition, the majority of publications on the topic have been conducted in populations of patients with an overtly degenerative hip, where the incidence of signs of impingement is higher. There has not been any study searching for the presence of signs of impingement in a symptom free population. For this reason, we searched for signs of femoroacetabular impingement in a general population and attempted to find correlations with degenerative hip disease. Material and method: We examined 200 computed tomography (CT) series of the pelvis performed for reason other than an orthopaedic indication. Four hundred hips were thus analysed with the Amira 4.1 3D software. We measured the classical coxometric parameters, orientation of the acetabulum, alpha angle, and presence or not of a bulge at the head-neck junction. Cartilage thickness was also mapped using a precise protocol. Cartilage thickness less than 0.25mm was considered for the purpose of this study to indicate degenerative disease. All data were processed with SPPS 17.0. Results: There were 103 men and 97 women, mean age 58 years and 59 years respectively. The mean alpha angle was 55.7. Retroversion was noted in 20% of hips and 28% exhibited an anterior bulge at the head-neck junction. The mean cartilage thickness at the
We carried out radial MRI in 30 hips with moderate osteoarthritis and in ten normal hips. On a scout view containing the entire acetabular rim, 12 vertical radial slices were set at 15° intervals. Different appearances were observed in different parts of the joint. In the weight-bearing portion, from 45°
Introduction. Conventional pre-operative planning for total hip arthroplasty mostly relies on the patient radiologic anatomy for the positioning and choice of implants. This kind of planning essentially remains a static approach since dynamic aspects such as the joint kinematics are not taken into account. Hence, clinicians are not able to fully consider the evolving behavior of the prosthetic joint that may lead to implant failures. In fact, kinematics plays an important role since some movement may create conflicts within the prosthetic joint and even provoke dislocations. The goal of our study was to assess the relationship between acetabular implant positioning variations and resultant impingements and loss of joint congruence during daily activities. In order to obtain accurate hip joint kinematics for simulation, we performed an in-vivo study using optical motion capture and magnetic resonance imaging (MRI). Methods. Motion capture and MRI was carried out on 4 healthy volunteers (mean age, 28 years). Motion from the subjects was acquired during routine (stand-to-sit, lie down) and specific activities (lace the shoes while seated, pick an object on the floor while seated or standing) known to be prone to implant dislocation and impingement. The hip joint kinematics was computed from the recorded markers trajectories using a validated optimized fitting algorithm (accuracy: translational error ≍ 0.5 mm, rotational error < 3°) which accounted for skin motion artifactsand patient-specific anatomical constraints (e.g. bone geometry reconstructed from MRI, hip joint center) (Fig. 1). 3D models of prosthetic hip joints (pelvis, proximal femur, cup, stem, head) were developed based on variations of acetabular cup's inclination (40°, 45°, 60°) and anteversion (0°, 15°, 30°) parameters, resulting in a total of 9 different implant configurations. Femoral anteversion remained fixed and determined as “neutral” with the stem being parallel to the posterior cortex of the femoral neck. Motion capture data of daily tasks were applied to all implant configurations. While visualizing the prosthetic models in motion, a collision detection algorithm was used to locate abnormal contacts between both bony and prosthetic components (Fig. 2). Moreover, femoral head translations (subluxation) were computed to evaluate the joint congruence. Results. Simulations showed collisions occurring at maximal ranges of motion in the
In order to clarify how intra-articular lesions
influence the survival of a periacetabular osteotomy in patients
with dysplasia of the hip, we performed an observational study of
121 patients (121 hips) who underwent a transposition osteotomy
of the acetabulum combined with an arthroscopy. Their mean age was
40.2 years (13 to 64) and the mean follow-up was 9.9 years (2 to
18). Labral and cartilage degeneration tended to originate from
the
Purpose: Determine the ideal form of subacromial decompression. Method: Six cadaveric shoulders with intact rotator cuffs (RTC) underwent “smooth &
move (SM),” limited acromioplasty with coracoacromial ligament (CAL) preservation, and CAL resection. Glenohumeral translation was measured in four directions utilizing electromagnetic spatial sensors. Peak RTC pressure was measured during arm abduction utilizing pressure film sensors. Results:
Lesions of the acetabular rim have been implicated as a cause of hip pain in various pathologic conditions and are considered to predispose the hip to development of accelerated degenerative disease. In developmental dysplasia of the hip (DDH) and anterior femoroacetabular impingement (FAI), intrinsically normal intraarticular soft tissue structures are exposed to joint loading forces that physically exceed their tolerance level posing these pathomorphologies as precursors of osteoarthritis. In DDH, the deficient acetabular coverage of the femoral head has been related to osteoarthrosis, while the orientation of the femoral head is considered to play a less important role. The resulting instability and anterolateral migration tendency of the femoral head leads to chronic shear stresses at the acetabular margin. In FAI, repetitive peak contact pressures occur when the femoral head-neck junction abuts against the acetabular rim during joint flexion. Predisposing morphologies are femoral abnormalities such as an insufficient femoral head-neck offset seen in head tilt or pistol grip deformities, slipped capital femoral epiphysis, or malunited femoral neck fractures with the orientation and shape of the acetabulum contributing to this pathology. In classical DDH and FAI, diagnosis is primarily based on clinical signs and symptoms and conventional radiography. However, in cases of clinical and radiographic borderline disease establishment of the correct diagnosis is sometimes difficult. This presentation reports how the MRarthrographic appearance of acetabular rim pathologies can be used to differentiate both conditions. In DDH and FAI, labral pathologies localize identically with a predilection to the
This study was conducted to determine the effect of passive and active muscle loading on humeral head translation during glenohumeral abduction. A shoulder simulator produced unconstrained active glenohumeral abduction using several sets of loading ratios. Significantly greater translations occurred in passive motion as compared to active motion between 30 and 70 degrees of elevation in three dimensions and in the
Research on hip biomechanics has analyzed femoroacetabular contact pressures and forces in distinct hip conditions, with different procedures, and used diverse loading and testing conditions. The aim of this scoping review was to identify and summarize the available evidence in the literature for hip contact pressures and force in cadaver and in vivo studies, and how joint loading, labral status, and femoral and acetabular morphology can affect these biomechanical parameters. We used the PRISMA extension for scoping reviews for this literature search in three databases. After screening, 16 studies were included for the final analysis.Aims
Methods
Purpose: Revision of a humeral prosthesis or a total shoulder arthroplasty is a difficult therapeutic challenge. The purpose of this work was to report our experience in a retrospective series of 19 inverted Grammont prostheses implanted during revision procedures. Material and methods: The series included 11 women and eight men, mean age 66.8 years (45–84). Nine patients had already undergone at least two procedures before the revision of their prosthesis. There were 19 revisions of humeral prostheses and four revision total shoulder arthroplasties. Causes leading to revision of the humeral prostheses were: infection one patient, secondary cuff tears six patients,
Femoroacetabular impingement (FAI) patients report exacerbation of hip pain in deep flexion. However, the exact impingement location in deep flexion is unknown. The aim was to investigate impingement-free maximal flexion, impingement location, and if cam deformity causes hip impingement in flexion in FAI patients. A retrospective study involving 24 patients (37 hips) with FAI and femoral retroversion (femoral version (FV) < 5° per Murphy method) was performed. All patients were symptomatic (mean age 28 years (SD 9)) and had anterior hip/groin pain and a positive anterior impingement test. Cam- and pincer-type subgroups were analyzed. Patients were compared to an asymptomatic control group (26 hips). All patients underwent pelvic CT scans to generate personalized CT-based 3D models and validated software for patient-specific impingement simulation (equidistant method).Aims
Methods
Developmental dysplasia of the hip is a condition in which the acetabulum provides insufficient coverage of the femoral head in the hip joint. This configuration gives poor biomechanical load distribution, with increased stress at the superior aspect of the joint surfaces, and can often lead to degenerative arthritis. Morphologically, the poor coverage may be due to an acetabulum that is too shallow or oriented in valgus. The dysplastic deformity can be treated surgically with a group of similar procedures, often labeled periacetabular osteotomies or rotational acetabular osteotomies. Each involves separating the acetabulum from the pelvis and fixating the fragment back to the pelvis in an orientation with increased coverage of the femoral head. This redistributes the biomechanical loads relative to acetabulum. Bone remodeling at the level of trabeculae is an accepted concept under research; however, it is unclear whether the hip undergoes gross morphology changes in response to changes in biomechanical loading. An understanding of the degree to which this remodeling occurs (if at all) may have an impact on surgical planning. In this retrospective study, computed tomography (CT) scans of 13 patients (2 male, 11 female, 40 ± 9 years of age) undergoing unilateral periacetabular osteotomies were examined; scans were taken both pre-operatively and at least a year post-operatively with an in-plane resolution of 0.55 mm and a slice thickness of 1.25 mm. Scans were segmented to produce triangulated meshes for the proximal femurs and the pelvis. These scans were manually processed to isolate the articular portions of the femoral heads and acetabulums, respectively; the fovea, acetabular fossa, any osteophytes and any segmentation artifacts were excluded. Post-operative meshes were registered to their pre-operative counterparts for both the femoral head and the acetabulum, for both the operative and non-operative hips, using the iterative closest point (ICP) algorithm to 20 iterations. To account for differences in defining the edges of the articular surfaces in the manual isolation, metrics were only calculated using points that were within 0.3 mm of a normal from the opposing mesh. With the resulting matched data, nearest neighbour distances were calculated to form the remodeling metrics. Select spurious datapoints were removed manually. For the operative femoral heads, the registered post-operative points were 0.24±0.53 mm outside of the pre-operative points. The maximum deviation was on average 1.94 mm with worst-case of 2.99 mm; the minimum deviation was −0.62 mm with worst-case of −2.06 mm. Positive numbers indicate the post-operative points are ‘outside’ of the pre-operative points – that is, farther from the head centre. The non-operative femoral heads have similar deviation values, 0.21±0.46 mm outside, with maximum and minimum deviation averaging to 1.24 mm and −0.74 mm respectively, with worst cases of 2.99mm and −1.80mm. For the operative acetabulums, the post-operative deviations were −0.08±0.43mm. The maximum and minimum deviations averaged to 0.62mm and −0.82mm, with worst cases of 2.14mm and −1.51mm across the set. Again, the non-operative acetabulums were very similar; post-operative deviations were −0.02±0.43mm, maximum and minimum deviations averaged to 1.24mm and −0.65mm, with worst cases of 1.97mm and −2.00mm. These quantitative measurements were reflected in manual examination of the meshes; generally speaking, there were small deviations with no overarching patterns across the anatomy. All metrics were very similar across the same anatomy (that is, femoral head or acetabulum) regardless of whether the hip operative or non-operative. Femurs tended to ‘grow’ slightly post-operatively, but by less than a half voxel in size. Given that the CT voxels are large compared to the measured deviations, it is possible the results may be sensitive to the manual segmentations used as source data. Manual examination of the deviations indicated a few potential trends. Seven operative and eleven non-operative acetabulums had a small patch of positive deviation (1mm to 1.5mm) in the
Cite this article:
The aims of the study were to report for a cohort aged younger than 40 years: 1) indications for HRA; 2) patient-reported outcomes in terms of the modified Harris Hip Score (HHS); 3) dislocation rate; and 4) revision rate. This retrospective analysis identified 267 hips from 224 patients who underwent an hip resurfacing arthroplasty (HRA) from a single fellowship-trained surgeon using the direct lateral approach between 2007 and 2019. Inclusion criteria was minimum two-year follow-up, and age younger than 40 years. Patients were followed using a prospectively maintained institutional database.Aims
Methods
This study compared patients who underwent arthroscopic repair of large to massive rotator cuff tears (LMRCTs) with isolated incomplete repair of the tear and patients with incomplete repair with biceps tendon augmentation. We aimed to evaluate the additional benefit on clinical outcomes and the capacity to lower the re-tear rate. We retrospectively reviewed 1,115 patients who underwent arthroscopic rotator cuff repair for full-thickness tears between October 2011 and May 2019. From this series, we identified 77 patients (28 male, 49 female) with a mean age of 64.1 years (50 to 80). Patients were classified into groups A (n = 47 incomplete) and B (n = 30 with biceps augmentation) according to the nature of their reconstruction. Clinical scores were checked preoperatively and at six months, one year, and two years postoperatively. In preoperative MRI, we measured the tear size, the degree of fatty infiltration, and muscle volume ratio of the supraspinatus. In postoperative MRI, the integrity of the repaired rotator cuff tendon was assessed using the Sugaya classification. Tendon thickness at the footprint was evaluated on T2-weighted oblique coronal view.Aims
Methods
Adverse spinal motion or balance (spine mobility) and adverse pelvic mobility, in combination, are often referred to as adverse spinopelvic mobility (SPM). A stiff lumbar spine, large posterior standing pelvic tilt, and severe sagittal spinal deformity have been identified as risk factors for increased hip instability. Adverse SPM can create functional malposition of the acetabular components and hence is an instability risk. Adverse pelvic mobility is often, but not always, associated with abnormal spinal motion parameters. Dislocation rates for dual-mobility articulations (DMAs) have been reported to be between 0% and 1.1%. The aim of this study was to determine the early survivorship from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) of patients with adverse SPM who received a DMA. A multicentre study was performed using data from 227 patients undergoing primary total hip arthroplasty (THA), enrolled consecutively. All the patients who had one or more adverse spine or pelvic mobility parameter had a DMA inserted at the time of their surgery. The mean age was 76 years (22 to 93) and 63% were female (n = 145). At a mean of 14 months (5 to 31) postoperatively, the AOANJRR was analyzed for follow-up information. Reasons for revision and types of revision were identified.Aims
Methods
Ceramic-on-ceramic bearings provide a solution to the osteolysis seen with traditional metal-on-polyethylene bearings. Sporadic reports of ceramic breakage and squeaking concern some surgeons and this bearing combination can show in vivo signs of edge loading wear which was not predicted from in vitro studies. Taper damage or debris in the taper between the ceramic and metal may lead to breakage of either a ceramic head or insert. Fastidious surgical technique may help to minimise the risk of ceramic breakage. Squeaking is usually a benign complication, most frequently occurring when the hip is fully flexed. Rarely, it can occur with each step of walking when it can be sufficiently troublesome to require revision surgery. The etiology of squeaking is multifactorial origin. Taller, heavier and younger patients with higher activity levels are more prone to hips that squeak. Cup version and inclination are also relevant factors. Fifty-five ceramic bearings revised at our center were collected over 12 years. Median time to revision was 2.7 years. Forty-six (84%) cases had edge loading wear. The median femoral head wear volume overall was 0.2mm. 3. /yr, for
Rotational acetabular osteotomy (RAO) has been reported to be effective in improving symptoms and preventing osteoarthritis (OA) progression in patients with mild to severe develomental dysplasia of the hip (DDH). However, some patients develop secondary OA even when the preoperative joint space is normal; determining who will progress to OA is difficult. We evaluated whether the preoperative cartilage condition may predict OA progression following surgery using T2 mapping MRI. We reviewed 61 hips with early-stage OA in 61 patients who underwent RAO for DDH. They underwent preoperative and five-year postoperative radiological analysis of the hip. Those with a joint space narrowing of more than 1 mm were considered to have 'OA progression'. Preoperative assessment of articular cartilage was also performed using 3T MRI with the T2 mapping technique. The region of interest was defined as the weightbearing portion of the acetabulum and femoral head.Aims
Methods
Slipped upper femoral epiphysis (SUFE) has well documented biochemical and mechanical risk factors. Femoral and acetabular morphologies seem to be equally important. Acetabular retroversion has a low prevalence in asymptomatic adults. Hips with dysplasia, osteoarthritis, and Perthes’ disease, however, have higher rates, ranging from 18% to 48%. The aim of our study was to assess the prevalence of acetabular retroversion in patients presenting with SUFE using both validated radiological signs and tomographical measurements. A retrospective review of all SUFE surgical cases presenting to the Royal Children’s Hospital, Melbourne, Australia, from 2012 to 2019 were evaluated. Preoperative plain radiographs were assessed for slip angle, validated radiological signs of retroversion, and standardized postoperative CT scans were used to assess cranial and mid-acetabular version.Aims
Methods
Introduction. We performed humeral head replacement (HHR) with smaller head for closing the cuff defect in patients of cuff tear arthropathy (CTA). And also, if the cuff defect could not close by decreasing the head size, we add muscle tendon transfer such as latissimus dorsi transfer for posterosuperior defect and pectoralis major transfer for
This study aimed to use intraoperative free electromyography to examine how the placement of a retractor at different positions along the anterior acetabular wall may affect the femoral nerve during total hip arthroplasty (THA) when undertaken using the direct anterior approach (THA-DAA). Intraoperative free electromyography was performed during primary THA-DAA in 82 patients (94 hips). The highest position of the anterior acetabular wall was defined as the “12 o’clock” position (middle position) when the patient was in supine position. After exposure of the acetabulum, a retractor was sequentially placed at the ten, 11, 12, one, and two o’clock positions (right hip; from superior to inferior positions). Action potentials in the femoral nerve were monitored with each placement, and the incidence of positive reactions (defined as explosive, frequent, or continuous action potentials, indicating that the nerve was being compressed) were recorded as the primary outcome. Secondary outcomes included the incidence of positive reactions caused by removing the femoral head, and by placing a retractor during femoral exposure; and the incidence of femoral nerve palsy, as detected using manual testing of the strength of the quadriceps muscle.Aims
Methods
Introduction:. The lateral radiographs are useful in evaluation of the acetabular cup anteversion. However, this method was affected by variations in pelvic position and radiographic technique. In this study, we employed the ischial axis (IA) as an anatomical landmark on the lateral radiographs, and we investigated a relationship between IA and the anterior pelvic plane (APP) using three-dimensional computed tomography (3D-CT). Using these findings, we report a new method for accurate measurement of the acetabular cup anteversion on plain lateral radiographs using IA as an anatomical reference. Materials and Methods:. At first, preoperative3D-CT images were obtained in 109 patients who underwent total hip arthroplasty. The diagnosis was osteoarthritis in all patients. The angle between the IA (defined by a line connecting the anterior edge of the greater sciatic notch and the lesser sciatic notch) and APP (defined by the bilateral
We performed curettage and bone grafting of amyloid cysts of the femoral neck in five patients on long-term haemodialysis. All had had hip pain on weight-bearing. The duration of haemodialysis before the operation averaged 15 years and the average age of the patients was 53 years. All the large cystic lesions were located in the
The pressure distribution between the cartilaginous surfaces in the human hip joint was measured using pressure-sensitive film. Five cadaveric hip joints (aged between 58 and 87 years) were measured at three positions and loads, representing three instants in the stance phase of the walking cycle. The pressure distribution was not uniform, indicating that the cartilage did not, to any great extent, distribute the applied load. The maximum pressures recorded were about 10 MN/m2. The
Purpose: Femoroacetabular impingement (FAI) is recognized as an etiological risk factor for hip arthritis. The potential for joint preserving surgical techniques that may delay the progression to early arthritis and retard the possibility of arthroplasty at a young age is promising. This study presents the outcome of surgical treatment of FAI through a less invasive technique performed through a modified Smith-Peterson approach without hip dislocation, or arthroscopy. Method: Using an institutional database, a total of 72 patients (80 hips) with radiographic and clinical diagnosis of FAI who underwent direct anterior femoroacetabular osteoplasty (FAO) were identified. Preoperative and postoperative functional evaluation was performed on these patients. The operative findings were recorded in detail and evaluated with regard to outcome. Results: Intraoperative diagnosis of labral tear and osteochondral lesions in the
Purpose: The purpose of this study is to examine the rate of Buford complex in a consecutive series of patients with arthroscopic Bankart repair and to evaluate the postoperative outcome compared to a group of patients without this anatomical variation. Material and Method: The surgical findings of 138 consecutive shoulder arthroscopies for Bankart lesions were prospective evaluated between January 2005 and January 2007; the mean of age was 25 years old (range 14–52). The criteria used to establish the diagnosis of Buford Complex included: cordlike middle glenohumeral ligament inserted in the superior labrum and attached to the biceps tendon, and complete absence of
Purpose of the study: The purpose of this work was to search for a relationship between the size of the femoral cam, the presence of cup retroversion, and the presence of labral or chondral lesions on the arthroscan in patients with an asymptomatic femoroacetabular impingement. Material and method: Fifty arthroscans were obtained to explore impingements. The patients complained of groin or trochanteric pain limiting their physical activities. Generally signs of an
Osteonecrosis of the femoral head can be caused by a variety of disorders and affects the relatively young patient. Most studies have concentrated on the femoral changes; the sites of early lesions of the labrum and acetabular cartilage have not been recorded. We studied 17 hips with osteonecrosis and a wide congruent joint space on radiographs and by direct inspection of the femoral head, labrum and acetabular cartilage during surgery. All of the femoral heads had some
Femoroacetabular impingement recently was recognized as cause for osteoarthritis of the hip. There are two mechanism of impingement: (1) cam impingement caused by a non-spherical head, and (2) pincer impingement due to acetabular overcover. We hypothesized that both mechanism result in different articular damage patterns. Of 302 analyzed hips only 26 had an isolated cam and 16 an isolated pincer impingement. Cam impingement caused
The direct anterior approach (DAA) for total hip arthroplasty (THA) has potential advantages over other approaches and is most commonly performed with the patient in the supine position. We describe a technique for DAA THA with the patient in the lateral decubitus position and report the early clinical and radiological outcomes, the characteristics of the learning curve, and perioperative complications. All primary DAA THAs performed in the lateral position by a single surgeon over a four-year period from the surgeon’s first case using the technique were identified from a prospectively collected database. Modified Harris Hip Scores (mHHS) were collected to assess clinical outcome, and routine radiological analysis was performed. Retrospective review of the medical records identified perioperative complications, the characteristics of the learning curve, and revisions.Aims
Methods
In order to investigate the functional anatomy of gluteus minimus we dissected 16 hips in fresh cadavers. The muscle originates from the external aspect of the ilium, between the anterior and inferior gluteal lines, and also at the sciatic notch from the inside of the pelvis where it protects the superior gluteal nerve and artery. It inserts
The proximity of neural structures to the coracoclavicular ligaments limits the amount of coracoid process that can be harvested. The purpose of this study of 100 dry human scapulae was to define the anatomic limitations. We found the mean measurement of the horizontal arm of the coracoid process anterior to the conoid tubercle was 21.5 mm (SD 0.9 mm). In 10% of the scapulae, it was larger than 30 mm. In 66%, the posterior aspect of the conoid fused with the vertical ramus and the lateral lip of the suprascapular notch. This amount of coracoid appears to be large enough to expand the glenoid vault, and to hold two AO small fragment screws. It can be safely harvested if the conoid ligament is respected. Partial sacrifice of the trapezoid ligament is unavoidable, but does not compromise coracoclavicular stability. If the coracoid osteotomy is extended medial to the conoid tubercle it encroaches on the vertical ramus of the coracoid and can damage the suprascapular nerve. Posterior advancement of the osteotomy can extend onto the
Summary. The cartilage layer from cam-type femoroacetabular impingement deformities had lower stiffness and increased permeability compared to normal cartilage. This is consistent with osteoarthritis and supports the hypothesis of abnormal contact stresses. Introduction. Femoroacetabular impingement (FAI) has recently been associated with osteoarthritic (OA) degeneration of the hip and may be responsible for up to 90% of adult idiopathic OA cases. FAI results from deformities in the hip joint which may lead to abnormal contact stresses and degeneration. The more common cam-type deformity consists of a convex anterior femoral head-neck junction which impinges the
Of 44 patients (55 hips) with slipped upper femoral epiphysis treated from 1963 to 1989, 13 (14 hips) developed chondrolysis. Eight hips had chondrolysis at the time of presentation, all in female patients who were either coloured or black and who had moderate or severe slips. The other six hips had persistent pin penetration of the joint; in five of these the pin penetrated the
Introduction We have evaluated the early outcome of arthroscopic excision of the distal clavicle (Mumford procedure) for acromioclavicular joint pathology. Method Forty-one patients with acromioclavicular joint pathology underwent arthroscopic distal clavicle resections between 2002 and 2004. Preoperatively, all patients had acromioclavicular joint tenderness, 90% had a positive horizontal adduction test and 62% had a positive O’Brien’s AC compression test. All provocative signs were abolished on re-examination after acromio-clavicular joint injection. Surgery was indicated with failure of conservative management. Surgery was performed through a subacromial approach to the acromio-clavicular joint, using a Acromionizer (Smith-Nephew Dyonics, Andover, MA) burr through the
Shoulder instability and impingement are common in tennis players. During tennis, several impingements could occur: subcoracoid and
We used laser Doppler flowmetry (LDF) with a high energy (20 mW) laser to measure perfusion of the femoral head intraoperatively in 32 hips. The surgical procedure was joint debridement requiring dislocation or subluxation of the hip. The laser probe was placed within the
Purpose of the study: Anteversion of the cup during total hip arthroplasty (THA) is crucial for preventing the risk of dislocation. Interest has recently focused on an anatomic element often observed in the operative field during hip surgery: the transverse acetabular ligament (TAL). The TAL has become a landmark both for conventional procedures (Beverland) and for computed-assisted surgery. The purpose of this original research was to study the anteversion of the TAL in relation to the anterior pelvic plane in order to determine whether it could be a valid landmark for positioning the cup using the Lewinnek criteria (35±20° anteversion according to the Murray definition). Material and methods: Eight laboratory cadavers (three male, five female, mean age 82±3.3 years) were dissected; the pelvis was removed. Fifteen fresh healthy hips (free of trauma or degenerative disease) were also used for the study. The orientation of the peri-acetabular structures was measured with the probe of the BrainLab. ®. navigation system and the Motion Analysis. ®. system (Santa Rosa. CA) at the laboratory of biomechanics and biomechanical shocks (INRETS, Bron). The Lewinnek reference plane (anterior pelvic plane) was defined from the
Introduction and purpose: Fatigue leads to various disruptions in the musculoskeletal system. Specifically, it has been observed that fatigue disturbs perception of the position of the limbs and the spine as well as posture balancing control and gait kinematics. The purpose of this study is to determine whether orientation of the pelvis undergoes changes after a period of extreme work-related fatigue. Materials and methods: Orthopaedic Surgery residents in our hospital often work 24-hour shifts in the emergency department, which is considered a tiring activity which constitutes an appropriate model for professional burnout. In order to assess the position of the pelvis, we used pelvis tilt on the sagittal plane which is defined as the inclination of the plane which runs through all four
We evaluated the results of Cementless Surface Replacement Arthroplasty (CSRA) of the shoulder in 67 patients with advanced glenohumeral destruction who have an intact rotator cuff. Between november 2002 and december 2008, 70 CSRA (32 Copeland/ Biomet and 38 SMRR/ Lima) were implanted in 67 patients. A deltopectoral approach was used in 34 cases and an
Introduction and purpose: Pelvic tilt (PT) on the sagittal plane when standing can be defined as the rotation of the pelvis on a transverse axis. The use of PT is indicated for patients with chronic lumbar pain and/or spondylolisthesis. Current IP measurement methods require the use of radiographs or very complicated equipment. The purpose of this study is to describe a new fast and easy-to-use IP measurement technique and analyze its validity and reproducibility. Materials and methods: The measurement system consists in calculating the height of the
Percutaneous fluoroscopically assisted iliosacral screw insertion has become one of the most popular methods of stabilisation of the posterior aspect of the vertically unstable pelvis. Screw malpositioning rates range from 0 to 10 per cent. Screw malplacement can cause injury to the iliac and gluteal vessels, L4 to S1 nerve roots and sympathetic chain. We performed two radiographic studies on dry human bones to seek safe radiographic landmarks for insertion of iliosacral screws. Part 1. Two parallel linear densities are always present on lateral plain radiographs of the lumbosacral spine and pelvis. Using wire markers on pelvic bones, we accurately define the origin of these pelvic lines. Steel wires of different lengths were placed along the iliopectineal and arcuate lines of the pelvis. The shorter wire stopped at the anterior limit of the sacro-iliac joint. The longer wire extended further along the entire course of the medial border of the ilium to the iliac crest posteriorly. We demonstrate that each ‘ pelvic line ‘ represents the sharp bony ridge that forms the
Introduction: The anterior femoroacetabular impingement syndrome has so far been a great unknown in orthopedic surgery. It is typically characterized by pain when the hip is subjected to the flexion – adduction – internal rotation movement. This pain is provoked by the impaction of the head-neck interface on the anterior wall of the acetabulum. The reason for this may be a retroverted acetabulum, an excessively prominent
Introduction. Herniation pits had been considered as a normal variant, a cystic lesion formed by synovial invagination. On the contrary, it was also suggested that herniation pits were one of the diagnostic findings in femoroacetabular impingement (FAI) because of the high prevalence of herniation pits in the FAI patients. To date, the exact etiology is still unknown. The purpose of this study was to evaluate whether there is an association between the presence of herniation pits and morphological indicators of FAI based on computed tomography (CT) examination. Materials and methods. We reviewed the CT scans of 245 consecutive subjects (490 hips, age: 21–89 years) who had undergone abdominal and pelvic CT for reasons unrelated to hip symptom from September, 2010 to June, 2011. These subjects were mainly examined for abdominal disorders. We confirmed by the questionnaire survey that there were no subjects who had symptoms of hip joints. We reviewed them for the presence of herniation pits and the morphological abnormalities of the femoral head and acetabulum. Herniation pits were diagnosed when they were located at the
Background. Rotational acetabular osteotomy (RAO) is an effective treatment option for symptomatic acetabular dysplasia. However, excessive lateral and anterior correction during the periacetabular osteotomy may lead to femoroacetabular impingement. We used preoperative planning software for total hip arthroplasty to perform femoroacetabular impingement simulations before and after rotational acetabular osteotomies. Methods. We evaluated 11 hips in 11 patients with available computed tomography taken before and after RAO. All cases were female and mean age at the time of surgery was 35.9 years. All cases were early stage osteoarthritis without obvious osteophytes or joint space narrowing. Radiographic analysis included the center-edge (CE) angle, Sharp's acetabular angle, the acetabular roof angle, the acetabular head index (AHI), cross-over sign, and posterior wall sign. Acetabular anteversion was measured at every 5 mm slice level in the femoral head using preoperative and postoperative computed tomography. Impingement simulations were performed using the preoperative planning software ZedHip (LEXI, Tokyo, Japan). In brief, we created a three-dimensional model. The range of motion which causes bone-to-bone impingement was evaluated in flexion (flex), abduction (abd), external rotation in flex 0°, and internal rotation in flex 90°. The lesions caused by impingement were evaluated. Results. In the radiographic measurements, the CE angle, Sharp's angle, acetabular roof angle, and AHI all indicated improved postoperative acetabular coverage. The cross-over sign was recognized pre- and postoperatively in each case. Acetabular retroversion appeared in one case before RAO and in three cases after RAO. Preoperatively, there was a tendency to reduce the acetabular anteverison angle in the hips from distal levels to proximal. In contrast, there was no postoperative difference in the acetabular anteversion angle at any level. In our simulation study, bone-to-bone impingement occurred in flex (preoperative/postoperative, 137°/114°), abd (73°/54°), external rotation in flex 0°(34°/43°), and internal rotation in flex 90°(70°/36°). Impingement occurred within internal rotation 45°in flexion 90°in two preoperative and eight postoperative cases. The impingement lesions were
Introduction: Subtle deformity of the hip joint may cause osteoarthritis. In femoroacetabular impingement (FAI), cam deformities damage acetabular cartilage. Whether surgical removal of cam lesions halts progression is unknown. Sensitive, non-invasive assays of chondral damage are required to evaluate early treatment efficacy. Delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) permits inference of glycosaminoglycan (GAG) distribution. We aimed to determine whether hips with cam deformities have altered GAG content, using dGEMRIC. Methods: Subjects were recruited from a prospective cohort study. All were clinically and radiographically assessed. Hips with a normal joint space width (>
2.5mm) were eligible for dGEMRIC. 32 Hips (18 male, 14 female, mean age 51.7 years, none of whom had been investigated for hip pain) with (n=21) and without (n=11) cam deformities were scanned. 2 regions of interest (ROI) were studied:. acetabular cartilage from 12 to 3 O’Clock (T1-Index-acet). total cartilage (femoral and acetabular) for the joint from 9 to 3 O’Clock (T1-Indextotal). The average of all pixels within the given ROI defined the T1-index. For each hip, the ratio of the GAG content T1-Index-acet/T1-Indextotal was calculated. Mean T1-Indexto-tal and T1-Indexacet/T1-Indextotal were compared. Results: T1-Indextotal were similar (689ms v 700ms, p=0.79) but T1-Indexacet/T1-Indextotal was lower in cam hips (0.93 v 1.01, p=0.017), indicating localised depletion of GAG content. Cam hips with positive clinical signs had lower T1-Indextotal than cam hips without (629ms v 717ms, p=0.055), and non-cam hips (629ms v 722ms, p=0.049). Discussion: Cam hips have lower GAG content of their
The aims of this network meta-analysis (NMA) were to examine nonunion rates and functional outcomes following various operative and nonoperative treatments for displaced mid-shaft clavicle fractures. Initial search strategy incorporated MEDLINE, PubMed, Embase, and the Cochrane Library for relevant randomized controlled trials (RCTs). Four treatment arms were created: nonoperative (NO); intramedullary nailing (IMN); reconstruction plating (RP); and compression/pre-contoured plating (CP). A Bayesian NMA was conducted to compare all treatment options for outcomes of nonunion, malunion, and function using the Disabilities of the Arm Shoulder and Hand (DASH) and Constant-Murley Shoulder Outcome scores.Aims
Methods
Purpose of the study: Two principle angles describe the orientation of the acetabular reconstruction of hip arthroplsty: lateral inclination and anteversion. Lateal inclination is easily determined on the plain x-ray but the measurement of anteversion generally requires axial computed tomography (CT). The values measured for acetabular anteversion depend on the planes chosen as reference. Similarly the measurement of acetabular inclination using conventional radiographs is often considered imprecise due to the large number of variables involved. Several reference planes are described in the literature. The purpose of this work was to characterise the values obtained using two reference planes, the anterior pelvic plan (APP) used for navigation and the pelvic axis (proposed by other authors). Materials and Methods: We used the Hip-Plane-Sympios. ®. software to determine lateral inclination and anteversions using each reference plane. The APP was defined by three points: the
Background: The purpose of this study was to evaluate the mid and long-term results of the open repair of the rotator cuff tears in patients where pain of the shoulder was the primary and function the secondary consideration. Material – Method: the study includes 48 patients, out of a total 64, operated on during the period 1985–2001 for full-thickness massive tears of the rotator cuff. The average age was fifty-two years. In all but six the main symptom was persistent pain resulting from a chronic tear. This group had clinical evidence of a rotator cuff defect in the form of weakness and limited range of active motion. The six additional patients suffered from acute tears following trauma and were led to early surgical repair. Their characteristic sign was extensive limitation of active motion, whereas the passive movements were near normal. The operation performed was the anterior acromioplasty with cuff repair through an
Cam femoroacetabular impingement (FAI) is currently treated by resecting the femoral cam lesion. Some surgeons advocate additional
Percutaneous fluoroscopically asseisted iliosacral screw insertion has become one of the most popular methods of stabilisation of the posterior aspect of the vertically unstable pelvis. Screw malpositioning rates range from 0 to 10%. Screw misplacement can cause injury to the iliac and gluteal vessels, L4 to s1 nerve roots and sympathetic chain. We performed two radiographic studies on dry human bones to seek safe radiographic landmarks for insertion of iliosacral screws. Part 1: Two parallel linear densities are always present on lateral plain radiographs of the lumbosacral spine and pelvis. Using wire markers on pelvic bones, we accurtely define the origins of these “pelvic lines”. Steel wires of different lengths were placed along the iliopectineal and arcuate lines of the pelvis. The shorter wire stopped at the anterior limit of the sacroiliac joint. The longer wire extended further along the entire course of the medial border of the ilium to the iliac crest posteriorly. We demonstrate that each “pelvic line” represents the sharp bony ridge that forms the
The aim of the study was to compare two methods of calculating pelvic incidence (PI) and pelvic tilt (PT), either by using the femoral heads or acetabular domes to determine the bicoxofemoral axis, in patients with unilateral or bilateral primary hip osteoarthritis (OA). PI and PT were measured on standing lateral radiographs of the spine in two groups: 50 patients with unilateral (Group I) and 50 patients with bilateral hip OA (Group II), using the femoral heads or acetabular domes to define the bicoxofemoral axis. Agreement between the methods was determined by intraclass correlation coefficient (ICC) and the standard error of measurement (SEm). The intraobserver reproducibility and interobserver reliability of the two methods were analyzed on 31 radiographs in both groups to calculate ICC and SEm.Aims
Methods
Introduction Metal-on-Metal Hip Resurfacing (MMHR) has been established as a successful alternative to Total Hip Replacement (THR). However, several series report a 2 % incidence of early femoral neck fractures. Avascular necrosis (AVN) was considered to be responsible for the majority of observed fractures, raising concerns about the femoral head blood supply during MMHR. This study aims to further understand the mechanisms of femoral blood flow restriction by monitoring gas levels (O2) during the operative procedure. Methods Patients undergoing MMHR using the posterior approach were evaluated. Following division of fascia lata, a guide wire was introduced up the femoral neck, aiming for the
Introduction and purpose: Different neurovascular structures may be damaged when making arthroscopic portals to the shoulder joint. The description of new portals poses new challenges. The goal of the present study is to provide an update on the anatomic vasculonervous responses of the current approaches to shoulder arthroscopy. Materials and methods: 16 fresh cadavers were systematically dissected. The most usual arthroscopic portals were marked and, then, the dissection started on a plane-to-plane basis. Relationships were identified and distances were measured to the most important neurovascular elements with a standard caliber (accuracy: 0.5mm). Results: The portals studied and the structures at risk were the following:. * Posterior portal: anterior branch of the axillary nerve and posterior circumflex artery 3.4 cm (range: 1.4 – 5); cutaneous branch of the axillary nerve 6.3 cm (range: 3.8 – 8.3), suprascapular nerve 2.8 cm (range: 2.1–3.3). *
In a cadaveric study, the anterior shoulder capsule indicated the presence of the middle (MGHL) and inferior (IGHL) glenohumeral ligament by displaying folds. These folds became more prominent in adduction (AD) and internal rotation (IR), whereas they were smoothed out upon abduction (AB) and external rotation (ER). The present study was set up to determine whether this folding-unfolding mechanism (FUM) is influenced by the type of shoulder pathology. 300 consecutive shoulder arthroscopies were evaluated. 68 were done for instability, 21 for frozen shoulder and 221 for various pathologies in stable shoulders of which 100 for rotator cuff tears. Stable shoulders: The anterior band (AB) of the IGHL was marked by a prominent fold in IR and 30°AD. In full ER and 45°AB the fold was completely smoothed out. The MGHL was smooth in full ER and 15°AB. Frozen shoulders: The anterior capsule was smooth without visible folds in any degree of rotation, limited by the adhesive capsulitis. Releasing the capsule from the glenoid rim did not change this appearance. Unstable shoulders: In 17 shoulders with
Purpose: Femoroacetabular impingement (FAI) is recognized as a pathomechanical process that leads to hip osteoarthritis (OA). Past research has been focused on treatments for FAI; however, few studies have been done to link FAI with the progression of OA. It is hypothesized that elevated mechanical stimuli could provoke bone remodeling in the subchondral bone and articulating surfaces due to cam FAI (aspherical head-neck deformity), which would accelerate the progression of OA. Using finite element analysis (FEA), the aim is to compare healthy hips to hips with cam FAI – investigating the mechanical stimuli effect of FAI towards OA. Method: Net joint reaction forces were obtained from joint kinematics, kinetics, and by inverse dynamics calculation for a dynamic squat motion of a control subject and a cam FAI patient (both males with comparable age, BMI, and femur lengths). CT scans were acquired from both subjects. Data slices were compiled using 3D-DOCTOR (Able Software Corp, MA) to form a 3D model with slice thickness calibrated at 1.25mm in the superior-inferior axis. ANSYS (ANSYS, PA) software was used for FEA. The femur models were given quadrilateral shell elements and modeled as linear elastic orthotropic materials. The ground reaction forces were applied to the femur models, simulating dynamic loads, using boundary conditions specific to hip loading. Von Mises stresses were determined to examine stress concentrations and adverse loading conditions. Strain energy distributions were determined to examine the effect of stimuli on the initiation and rate of bone remodeling. Results: At the maximum squat-depth, the FEA results demonstrated that the net forces acting on the FAI hip produced high mechanical stimuli regions around the head and neck. The highest stress concentration (590 MPa) was located at the
Purpose: Osteosynthesis of complex subtrochanteric fractures is a difficult task. Complications are frequent and results are uncertain. Cemented fixation of pathological metastatic fractures requires a major intervention. The functional prognosis remains uncertain. Our objective was to evaluate the contribution of the long gamma nail (50 nails) in this type of situation and to determine its advantages and disadvantages. Material and methods: The 50 long gamma nails were inserted in 23 women and 26 men who were followed eight months (4–16). We implanted 39 long gamma nails for complex subtrochanteric fractures (AO classification) in patients aged 59 years on average (19–93) and eleven nails for metastatic femur fractures in patients aged 59 years on average (19–93) with a trochanterodiaphyseal localisation. For the non-metastatic fractures, closed nailing was used in 28 patients and minimum opening for eleven. For the metastatic fractures, the primary tumour was known in eleven cases. The nailing was a preventive measure in six and performed after fracture in five. Three patients had plurifocal fractures. We analysed 43 parameters (position of the cervical screw in the four quadrants of the femoral neck and clinical and radiological features). Results: For the 39 fractures, reduction was anatomic in 24 and with a gap in 15. The position of the cervical nail was correct in 34 cases. It was in the
Purpose of the study: Acetabular dysplasia is a recognized cause of premature hip degeneration. With increasing use of arthroplasty, the role of conservative treatment can be debated. The purpose of this work was to describe technical advances achieved with Ganz triple periacetabular osteotomy and evaluate long-term results. Material and methods: This study included 32 dysplastic hips in 28 patients treated by Ganz triple osteotomy and assessed a mean 12 years follow-up (range 2 – 20 years). Mean age was 32 years (range 18–47). There were 24 women and four men. Hip joint measurements were made on preoperaive standard x-rays with complementary recentered views if needed as well as computed tomography (CT) to better distinguish progressive degeneration. For early patients, the iniail osteotomy involved three cuts (ilioischial, iliopubic, ilial) starting close to the acetabulum and performed via three approaches: sub coxofemoral, intrapelvic, extrapelvic. The first technical change involved osteotomy of the
Patients with spinal pathology who undergo total hip arthroplasty (THA) have an increased risk of dislocation and revision. The aim of this study was to determine if the use of the Hip-Spine Classification system in these patients would result in a decreased rate of postoperative dislocation in patients with spinal pathology. This prospective, multicentre study evaluated 3,777 consecutive patients undergoing THA by three surgeons, between January 2014 and December 2019. They were categorized using The Hip-Spine Classification system: group 1 with normal spinal alignment; group 2 with a flatback deformity, group 2A with normal spinal mobility, and group 2B with a stiff spine. Flatback deformity was defined by a pelvic incidence minus lumbar lordosis of > 10°, and spinal stiffness was defined by < 10° change in sacral slope from standing to seated. Each category determined a patient-specific component positioning. Survivorship free of dislocation was recorded and spinopelvic measurements were compared for reliability using intraclass correlation coefficient.Aims
Methods
Purpose: To present the technique and the results of simultaneous arthroscopic reconstruction of Bankart and SLAP lesions in patients with anterior shoulder instability. Method: We performed shoulder arthroscopy in 95 patients aged 16–38 years (mean age:24,8) suffering anterior shoulder instability. Preoperative evaluation included clinical assessment, x-rays, MRI-arthrogram and examination under anaesthesia in comparison to the healthy shoulder. SLAP lesion was fixed using metallic suture anchors (FASTAK 2,4mm x 11,7 mm-Arthrex).The anchor was inserted in a 45° direction relative to the glenoid level. Bankart lesion was reconstructed using 2–3 bioabsorbable suture anchors (Panalok-Mitek J&
J).The arthroscope was inserted through standard posterior,
Purpose: Anterior hip pain raises difficult diagnostic and therapeutic problems. Several diagnostic hypotheses are currently put forward to explain the origin of this pain: subcondral cysts, labrum problems and anterior bone impingement, an association of these mechanisms. We report our operative observations in thirteen cases and examined the findings in light of the clinical data and imaging results in order to search for aetiopathogenic factors leading to this type of pain and to elucidate possible therapeutic options. Material and methods: Thirteen video-assisted miniarthrotomy procedures were performed using a novel technique in patients presenting anterior hip pain. The preoperative work-up included physical examination, standard radiographs, and MRI and/or arthroscan to rule out an extraarticular cause and identify any lesion of the superomedial border of the hip joint (acetabular rim and/or labrum). Results: Physical examination was not greatly contributive excepting the two posttrauma cases. Four patients had unique lesions of the labrum with no associated bone lesions and no argument in favour of anterior bony impingement identifiable from the preoperative data. Regularisation of the labrum improved the pain in these four patients. Isolated chondroplasty of the femoral head in one patient was very partially improved. The eight other patients had lesions of the labrum associated with a femoral head imprint, bony defects or osteophytes at the head-neck junction, or actetabular defects, or an association of these three types of lesions. The patients raised major diagnostic problems because it was difficult to identify the initially causal mechanism: anterior mechanical conflict with a cam effect and secondary disinsertion of the labrum due to microtrauma (five of the patients had an insufficiently concave head-neck junction or an osteophyte which may have been the cause); or an initial lesion of the labrum causing secondary subchondral acetabular defects resulting from the disinsertion (this hypothesis was compatible with the presentation of three patients who had no femoral anomalies, notably absence of any defect and a normal head-neck junction). Discussion: Video-assisted mini-arthrotomy of the hip enables careful inspection of the entire hip joint and facilitates any therapeutic measures necessary. Isolated lesions of the labrum are exceptional and generally are associated with remodelling of the
Evaluating musculoskeletal conditions of the lower limb and understanding the pathophysiology of complex bone kinematics is challenging. Static images do not take into account the dynamic component of relative bone motion and muscle activation. Fluoroscopy and dynamic MRI have important limitations. Dynamic CT (4D-CT) is an emerging alternative that combines high spatial and temporal resolution, with an increased availability in clinical practice. 4D-CT allows simultaneous visualization of bone morphology and joint kinematics. This unique combination makes it an ideal tool to evaluate functional disorders of the musculoskeletal system. In the lower limb, 4D-CT has been used to diagnose femoroacetabular impingement, patellofemoral, ankle and subtalar joint instability, or reduced range of motion. 4D-CT has also been used to demonstrate the effect of surgery, mainly on patellar instability. 4D-CT will need further research and validation before it can be widely used in clinical practice. We believe, however, it is here to stay, and will become a reference in the diagnosis of lower limb conditions and the evaluation of treatment options. Cite this article:
The Exeter V40 cemented polished tapered stem system has demonstrated excellent long-term outcomes. This paper presents a systematic review of the existing literature and reports on a large case series comparing implant fractures between the Exeter V40 series; 125 mm and conventional length stem systems. A systematic literature search was performed adhering to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criteria. In parallel, we performed a retrospective single centre study of Exeter V40 femoral stem prosthetic fractures between April 2003 and June 2020.Aims
Methods
The aim of this prospective cohort study was to evaluate the early migration of the TriFit cementless proximally coated tapered femoral stem using radiostereometric analysis (RSA). A total of 21 patients (eight men and 13 women) undergoing primary total hip arthroplasty (THA) for osteoarthritis of the hip were recruited in this study and followed up for two years. Two patients were lost to follow-up. All patients received a TriFit stem and Trinity Cup with a vitamin E-infused highly cross-linked ultra-high molecular weight polyethylene liner. Radiographs for RSA were taken postoperatively and then at three, 12, and 24 months. Oxford Hip Score (OHS), EuroQol five-dimension questionnaire (EQ-5D), and adverse events were reported.Aims
Methods
Purpose of the study: The aim of this work was to report our experience with arthroscopy for the treatment of acetabular labral lesions and identify prognostic factors determining mid- and long-term outcome. Material and methods: Between August 1991 and December 1997, 12 patients (ten women, two men, mean age 39 years, age range 25–61 years) underwent arthroscopic treatment of an acetabular labrum lesion. All were reviewed at a mean 4 years follow-up (18 months-8 years). Half of the patients (n = 6) had a history of hip surgery: two femoral osteotomies and one acetabular bone block for congenital hip dislocation, two high-energy traumas and one traumatic dislocation. Clinical manifestations including pain (n = 12), a sensation of a snag (n = 10), or blockage (n = 8) had developed over a mean 15 months (2–24 months). Standard x-rays evidenced early signs of degenerative disease in four cases and acetabular dysplasia in four (5° <
VCE <
18°), and were normal in four. Arthroscanography was performed in all cases and always evidenced a lesion of the anterior or
Optimal exposure through the direct anterior approach (DAA) for total hip arthroplasty (THA) conducted on a regular operating theatre table is achieved with a standardized capsular releasing sequence in which the anterior capsule can be preserved or resected. We hypothesized that clinical outcomes and implant positioning would not be different in case a capsular sparing (CS) technique would be compared to capsular resection (CR). In this prospective trial, 219 hips in 190 patients were randomized to either the CS (n = 104) or CR (n = 115) cohort. In the CS cohort, a medial based anterior flap was created and sutured back in place at the end of the procedure. The anterior capsule was resected in the CR cohort. Primary outcome was defined as the difference in patient-reported outcome measures (PROMs) after one year. PROMs (Harris Hip Score (HHS), Hip disability and Osteoarthritis Outcome Score (HOOS), and Short Form 36 Item Health Survey (SF-36)) were collected preoperatively and one year postoperatively. Radiological parameters were analyzed to assess implant positioning and implant ingrowth. Adverse events were monitored.Aims
Methods
We present the results of a prospective study about twenty-nine patients (thirty-two hips) with unstable slipped capital femoral epiphysis (SCFE), which were treated by indirect reduction and internal fixation of the epi- and metaphysis with 3–4 Kirschner-wires between 1990 – 1999. Methods: The 29 patients with a mean age of 12,9 years were clinically and radiologically evaluated after a mean follow-up of 3 years applying the score of Heymann and Herndon and by different roentgenological parameters (CCD-angle, femoral head diameter, length of the femoral neck and sphericity of the femoral head). Compared to the uninvolved side in unilateral case, which all had prophylactic pinning, all patients showed overall a good subjective and objective outcome. The average slip angle of all 29 unstable SCFE patients (32 hips) was 31° with 19 (59,4%) mild SCFE (<
30°), 7 (21,9%) moderate forms (30–50°) and 6 (18,8%) severe slips (>
50°). Results: According to the classification of Heyman and Herndon we had 18 excellent (62,1%), 9 good (31,1%), 1 fair (3,4%) and 1 poor (3,4%) results. None of the patients developed chondrolysis, but AVN occurred in one patient with complete and in one patient with partial involvement of the femoral head. The mean CCD-angle at the follow-up after skeletal maturity of the affected side was 133,3° in comparison to 135,9° of the non affected hips, indicating only a slight increase of varus position of the femoral neck of at average 2,6°. The mean length of the femoral neck of the affected hips was 64,5 mm in comparison to 70,8 mm of the not affected hips, thus a average difference of 6,3 mm. The neck/shaft-ratio between the affected and the not affected side was 0,88 (0,78 – 1,0). The mean femoral head diameter of the affected hips was 57,1 mm in comparison to 55,4 mm of the non affected hips. The radius quotient (RQ), measuring the relation of the femoral heads between the affected and the not affected hip was at average 103% (min 100 %, max. 114%). The sphericity according to Mose of the 58 hips (29 patients) treated by pinning with K-wires was normal (<
2mm) in 89,7% (52 hips), mild I°-aspheric (2–3mm) in 3,4% (2 hips), moderate II°-aspheric (3–4mm) in 3,4% (2 hips) and severe III°-aspheric (>
4mm) in 3,4% (2 hips). Conclusion: As a standard in our institution we recommend the simultaneous transfixation of the epi- and metaphysis with Kirschner-wires in patients with unstable SCFE as therapeutic method for the involved as well as prophylactic for the uninvolved femoral epiphysis. Implants should not be placed in the
Femoroacetabular impingement (FAI) is a potential cause of hip osteoarthritis (OA). The purpose of this study was to investigate the expression profile of matrix metalloproteinases (MMPs) in the labral tissue with FAI pathology. In this study, labral tissues were collected from four FAI patients arthroscopically and from three normal hips of deceased donors. Proteins extracted from the FAI and normal labrums were separately applied for MMP array to screen the expression of seven MMPs and three tissue inhibitors of metalloproteinases (TIMPs). The expression of individual MMPs and TIMPs was quantified by densitometry and compared between the FAI and normal labral groups. The expression of selected MMPs and TIMPs was validated and localized in the labrum with immunohistochemistry.Aims
Methods
Femoroacetabular impingement (FAI) describes abnormal bony contact of the proximal femur against the acetabulum. The term was first coined in 1999; however what is often overlooked is that descriptions of the morphology have existed in the literature for centuries. The aim of this paper is to delineate its origins and provide further clarity on FAI to shape future research. A non-systematic search on PubMed was performed using keywords such as “impingement” or “tilt deformity” to find early anatomical descriptions of FAI. Relevant references from these primary studies were then followed up.Aims
Methods
Tibial plateau fractures (TPFs) are complex injuries around the knee caused by high- or low-energy trauma. In the present study, we aimed to define the distribution and frequency of TPF lines using a 3D mapping technique and analyze the rationalization of divisions employed by frequently used classifications. In total, 759 adult patients with 766 affected knees were retrospectively reviewed. The TPF fragments on CT were multiplanar reconstructed, and virtually reduced to match a 3D model of the proximal tibia. 3D heat mapping was subsequently created by graphically superimposing all fracture lines onto a tibia template.Aims
Methods
Evaluate if treating an unstable femoral neck fracture with a locking plate and spring-loaded telescoping screw system would improve construct stability compared to gold standard treatment methods. A 31B2 Pauwels’ type III osteotomy with additional posterior wedge was cut into 30 fresh-frozen femur cadavers implanted with either: three cannulated screws in an inverted triangle configuration (CS), a sliding hip screw and anti-rotation screw (SHS), or a locking plate system with spring-loaded telescoping screws (LP). Dynamic cyclic compressive testing representative of walking with increasing weight-bearing was applied until failure was observed. Loss of fracture reduction was recorded using a high-resolution optical motion tracking system.Aims
Methods
The aim of this study was to investigate the structural integrity of torn and non-torn human acetabular labral tissue. A total of 47 human labral specimens were obtained from a biobank. These included 22 torn specimens and 25 control specimens from patients undergoing total hip arthroplasty with macroscopically normal labra. The specimens underwent dynamic shear analysis using a rheometer to measure storage modulus, as an indicator of structural integrity.Objectives
Methods