Advertisement for orthosearch.org.uk
Results 1 - 20 of 26
Results per page:
Orthopaedic Proceedings
Vol. 105-B, Issue SUPP_16 | Pages 16 - 16
17 Nov 2023
Youssef A Pegg E Gulati A Mangwani J Brockett C Mondal S
Full Access

Abstract

Objectives

The fidelity of a 3D model created using image segmentation must be precisely quantified and evaluated for the model to be trusted for use in subsequent biomechanical studies such as finite element analysis. The bones within the ankle joint vary significantly in size and shape. The purpose of this study was to test the hypothesis that the accuracy and reliability of a segmented bone geometry is independent of the particular bone being measured.

Methods

Computed tomography (CT) scan data (slice thickness 1 mm, pixel size 808±7 µm) from three anonymous patients was used for the development of the ankle geometries (consisting of the tibia, fibula, talus, calcaneus, and navicular bones) using Simpleware Scan IP software (Synopsys, Exeter, UK). Each CT scan was segmented 4 times by an inexperienced undergraduate, resulting in a total of 12 geometry assemblies. An experienced researcher segmented each scan once, and this was used as the ‘gold standard’ to quantify the accuracy. The solid bone geometries were imported into CAD software (Inventor 2023, Autodesk, CA, USA) for measurement of the surface area and volume of each bone, and the distances between bones (tibia to talus, talus to navicular, talus to calcaneus, and tibia to fibula) were carried out. The intra-class coefficient (ICC) was used to assess intra-observer reliability. Bland Altman plots were employed as a statistical measure for criteria validity (accuracy) [1].


Orthopaedic Proceedings
Vol. 105-B, Issue SUPP_16 | Pages 15 - 15
17 Nov 2023
Mondal S Mangwani J Brockett C Gulati A Pegg E
Full Access

Abstract

Objectives

This abstract provides an update on the Open Ankle Models being developed at the University of Bath. The goal of this project is to create three fully open-source finite element (FE) ankle models, including bones, ligaments, and cartilages, appropriate musculoskeletal loading and boundary conditions, and heterogeneous material property distribution for a standardised representation of ankle biomechanics and pre-clinical ankle joint analysis.

Methods

A computed tomography (CT) scan data (pixel size of 0.815 mm, and slice thickness of 1 mm) was used to develop the 3D geometry of the bones (tibia, talus, calcaneus, fibula, and navicular). Each bone was given the properties of a heterogeneous elastic material based on the CT greyscale. The density values for each bone element were calculated using a linear empirical relation, ρ= 0.0405 + (0.000918) HU and then power law equations were utilised to get the Young's Modulus value for each bone element [1]. At the bone junction, a thickness of cartilage ranging from 0.5–1 mm, and was modelled as a linear material (E=10 MPa, ν=0.4 [2]). All ligament insertions and positions were represented by four parallel spring elements, and the ligament stiffness and material attributes were applied in accordance with the published literature [2]. The ankle model was subjected to static loading (balance standing position). Four noded tetrahedral elements were used for the discretization of bones and cartilages. All degrees of freedom were restricted at the proximal ends of the tibia and fibula. The ground reaction forces were applied at the underneath of the calcaneus bone. The interaction between the cartilages and bones was modelled using an augmented contact algorithm with a sliding elastic contact between each cartilage. A tied elastic contact was used between the cartilages and the bone. FEbio 2.1.0 (University of Utah, USA) was used to construct the open-source ankle model.


Orthopaedic Proceedings
Vol. 103-B, Issue SUPP_16 | Pages 37 - 37
1 Dec 2021
Chen H Gulati A Mangwani J Brockett C Pegg E
Full Access

Abstract

Objectives

The aim of this study was to develop an open-source finite element model of the ankle for identification of the best clinical treatment to restore stability to the ankle after injury.

Methods

The ankle geometry was defined from the Visible Human Project Female CT dataset available from the National Library of Medicine, and segmented using Dragonfly software (Object Research Systems, 2020). The finite element model was created with FEBio (University of Utah, 2021) using the dynamic nonlinear implicit solver. Linear isotropic material properties were assigned to the bones (E=7300MPa, ν=0.3, ρ=1730kg/m3) and cartilage (E=10MPa, ν=0.4, ρ=1100kg/m3). Spring elements were used to represent the ligaments and material properties were taken from Mondal et al. [1]. Lagrangian contact was defined between the cartilaginous surfaces with μ=0.003. A standing load case was modelled, assuming even distribution of load between the feet. A reaction force of 344.3N was applied to the base of the foot, a muscle force of 252.2N, and the proximal ends of the tibia and fibula were fully constrained.


Orthopaedic Proceedings
Vol. 103-B, Issue SUPP_10 | Pages 3 - 3
1 Aug 2021
Wignall A Giannoudis V Jimenez A De C Sturdee S Giannoudis P Pandit H Gulati A Palan J
Full Access

In March 2020, the World Health Organisation declared the COVID-19 outbreak a pandemic. Multiple new guidelines were proposed and existing models of social, domestic and hospital care altered. Most healthcare systems were largely unprepared for this and this pandemic has tested their adaptability. This study is aimed at assessing the impact of covid-19 on the demographics, presentation and clinical management of patients with proximal femoral (hip) fractures.

This retrospective multi-centre cohort study compared all patients admitted with hip fractures, between 1st March and 30th May 2019 (Group PC: Pre-Covid) with hip fracture patients admitted over the same time period during the pandemic in 2020 (Group C: Covid). The data was obtained from the hospitals' local and National Hip Fracture Databases. Mortality data was checked with the Office for National Statistics (ONS). Primary outcomes were time to theatre, in-patient length of stay and 30-day mortality.

580 patients were included (304 PC, 276 C). Patient Charlson comorbidity index and Nottingham Hip Fracture scores were broadly similar across the two cohorts. There was a significant reduction in percentage of total hip replacements in Group C (11% to 5%, p=0.006). There was an increase in conservative management in group C (1% to 5%, p=0.002). The time to theatre was significantly delayed in Group C (43.7 hours C versus 34.6 hours PC, p<0.001). Overall length of hospital stay was similar in both groups (16.6 days PC versus 15 days C, p=0.089). 30-day mortality rate in Group C was 9.8% compared to 8.2% in Group PC (p=0.431), but for covid (+) patients it was significantly higher at 38.2% versus 5.8% in covid (−) patients (p<0.001).

This is one of the largest multi-centre comparative cohort study in the literature to date, examining the impact of the covid-19 pandemic on the management of hip fracture patients. Whilst mortality rates were similar in both groups, covid patients were almost seven times more likely to die, reflecting the seriousness of the covid-19 infection and its sequelae in such elderly, vulnerable patients.


Orthopaedic Proceedings
Vol. 101-B, Issue SUPP_13 | Pages 1 - 1
1 Nov 2019
Makvana S Faroug R Venturini S Alcorn E Gulati A Gaur A Mangwani J
Full Access

Introduction

Hindfoot surgery is assumed to be more painful than midfoot/forefoot procedures with the former often requiring an inpatient stay for pain relief. Poorly controlled pain is associated with adverse patient outcomes and consequently, peripheral nerve blocks (PNB) have become popular for their effective pain control.

Aim

To investigate whether hindfoot procedures are more painful than forefoot/midfoot procedures by measuring pain scores, assessing effectiveness of PNBs and patient satisfaction in foot and ankle surgery.


The Bone & Joint Journal
Vol. 100-B, Issue 6 | Pages 687 - 692
1 Jun 2018
McCormack DJ Gulati A Mangwani J

Our aim in this paper was to investigate the guidelines and laws governing informed consent in the English-speaking world. We noted a recent divergence from medical paternalism within the United Kingdom, highlighted by the Montgomery v Lanarkshire Health Board ruling of 2015. We investigated the situation in the United Kingdom, Australia, New Zealand, Canada, and the United States of America. We read the national guidance regarding obtaining consent for surgical intervention for each country. We used the references from this guidance to identify the laws that helped inform the guidance, and reviewed the court documents for each case.

There has been a trend towards a more patient-focused approach in consent in each country. Surgeons should be aware of the guidance and legal cases so that they can inform patients fully, and prevent legal problems if outdated practices are followed.

Cite this article: Bone Joint J 2018;100-B:687–92.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_19 | Pages 13 - 13
1 Nov 2016
Qureshi A Gulati A Shah A Mangwani J
Full Access

Aim

To determine the influence of tendo achilles (TA) rupture gap distance and location on clinical outcome managed with accelerated functional rehabilitation.

Methods

Twenty six patients with acute complete TA ruptures underwent ultrasound (US) within a week of injury. Measurements included the distance of the rupture from the enthesis and the gap distance between the tendon edges in three positions –

foot plantigrade,

maximum equinus and

maximum equinus with 90o knee flexion.

All patients were managed non-operatively in functional weightbearing orthoses. Nineteen patients were followed up at a mean of 6.1 years (range 5.8–6.5). Outcomes included ultrasound confirmation of healing, Achilles Tendon Rupture Score (ATRS) and Modified Lepilahti score (MLS).


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_14 | Pages 14 - 14
1 Jul 2016
Kannan S Gulati A Shetty A Godsiff S
Full Access

Bowel management following joint replacement is often neglected leading lot of patient distress, with the advent of the enhanced orthopedic rehabilitation program, there is a need of a guideline to ensure prompt and quick recovery of bowel habits before discharge. Our aim was to identify the incidence of constipation in joint replacement patients, to evaluate the current practice of bowel management and formulate a protocol for management of constipation to improve the practice. We conducted a prospective study of 50 patients who underwent joint replacement procedures at our institute between September and October 2015. Following initial audit, we formulated a protocol for bowel management, and performed a re-audit by collecting a prospective data of 50 patients. The statistical analysis was done and calculating the mean and standard deviation for continuous variable and Fischer's exact test was used and significance level was set at 0.05. Incidence of constipation was 88% and laxatives were prescribed in 42%. More importantly, there was no correlation between constipation and pre operative fasting (p Value 0.33), post operative fasting (p Value 0.1822), type of surgery (p value 1.00) and type of anaesthesia (p Value 0.27). Following introduction of bowel protocol the laxative prescription increased to 98% (Prophylactic in 81%), consequently the incidence of constipation reduced to 18%. Implementing bowel protocol significantly will improve the patient care and reduce the rate of complications.


The Bone & Joint Journal
Vol. 95-B, Issue 5 | Pages 605 - 608
1 May 2013
Murray DW Gulati A Gill HS

The Exeter femoral stem is a double-tapered highly polished collarless cemented implant with good long-term clinical results. In order to determine why the stem functions well we have undertaken a long-term radiostereometric analysis (RSA) study.

A total of 20 patients undergoing primary Exeter total hip replacement for osteoarthritis using the Hardinge approach were recruited and followed with RSA for ten years. The stems progressively subsided and internally rotated with posterior head migration. The mean subsidence was 0.7 mm (95% confidence interval (CI) 0.5 to 0.9) at two years and 1.3 mm (95% CI 1.0 to 1.6) at ten years. The mean posterior migration of the head was 0.7 mm (95% CI 0.5 to 0.9) at two years and 1.2 mm (95% CI 1.0 to 1.4) at ten years. There was no significant cement restrictor migration.

The Exeter stem continues to subside slowly into the cement mantle in the long term. This appears to compress the cement and the cement bone interface, contributing to secure fixation in the long term.

Cite this article: Bone Joint J 2013;95-B:605–8.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_19 | Pages 31 - 31
1 Apr 2013
Basu I Gulati A Aziz S Flyn J
Full Access

Introduction

Achilles tendinosis results from a chronic degenerative process within the tendon. Topaz micro-debridement aims to restore the degenerate micro-architecture within the tendon reducing painful symptoms experienced by patients. Topaz micro-debridement has been used to successfully treat upper limb tendinopathies but its application to tendinopathies of the foot and ankle is relatively new. This study aims to assess the functional outcomes following topaz radiofrequency micro-debridement for Achilles tendinosis.

Materials/Methods

All cases of topaz micro-debridement for Achilles tendinosis were identified from hospital records spanning a five year period. VISA-A assessment questionnaires were sent to these patients to assess the patients functional status pre and post-surgery. Patients were asked to comment on their overall satisfaction and to report any complications they had experienced. Eight responses were received and included in analysis. Hospital records and imaging results were investigated for those that responded.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 358 - 358
1 Sep 2012
Gulati A Walker C Bhatia M
Full Access

Introduction

Venous thromboembolism (VTE) is a significant cause of patient morbidity and mortality, the risk of which increases in orthopaedic patients with lower limb immobilisation. This incidence should in theory reduce if the patients are ambulatory early in the treatment phase. The aim of this study was, therefore, to identify a difference in the incidence of symptomatic VTE by treating acute Achilles tendon rupture patients with conventional non-weight bearing plaster versus functional weight bearing mobilisation.

Methodology

The notes of 91 consecutive patients with acute Achilles tendon rupture were retrospectively reviewed and prospectively followed. The patients' demographics, treatment modality (non-weight bearing plaster versus weight bearing boot), and the type of plaster immobilisation was compared to assess whether they affect the incidence of clinical VTE. The predisposing risk factors were also analysed between the treatment groups.

Out of 91 patients, 50 patients with acute Achilles tendon rupture were treated conservatively in a conventional non-weight bearing immobilisation cast. From these 50 patients, 3 then underwent surgery and were therefore excluded from the results. On the other hand, 41 patients were treated with functional weight bearing mobilisation (Vacupad). Patients who did have a symptomatic thromboembolic event also had an ultrasound scan to confirm a deep vein thrombosis of the lower limb or a CT-scan to confirm pulmonary embolism.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 583 - 583
1 Sep 2012
Walker C Gulati A Bhatia M
Full Access

Introduction/Aim

Thromboembolism is a significant cause of patient morbidity and mortality, the risk of which increases in orthopaedic patients with lower limb immobilisation. It was therefore, our aim to identify a difference in symptomatic thromboembolism by treating acute Achilles tendon rupture patients with conventional non-weight bearing plaster versus functional weight bearing mobilisation.

Methodology

The notes of 91 consecutive patients with acute Achilles tendon rupture were reviewed. The patients demographics, treatment modality (non-weight bearing plaster versus weight bearing boot), and predisposing risk factors were analysed. From the 91 patients, 50 patients with acute Achilles tendon rupture were treated conservatively in a non-weight bearing immobilisation cast. From these 50 patients, 3 then underwent surgery and were therefore excluded from the results. 41 patients were treated with functional weight bearing mobilisation. Patients who did have a symptomatic thromboembolic event had an ultrasound scan to confirm a deep vein thrombosis of the lower limb, or a CT-scan to confirm pulmonary embolism.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXIX | Pages 92 - 92
1 Jul 2012
Mehmood S Batta V Gulati A Pandit H Bottomley N Gil H Beard D Dodd C Jackson W Murray D Price A
Full Access

INTRODUCTION

Establishing a full-thickness cartilage in the lateral compartment and functionally intact ACL is vital before proceeding with unicompartmental knee replacement (UKR). The aim of this study is to assess whether MRI is a useful adjunct in predicting suitability for UKR, as compared to standard and stress radiographs.

METHODS

We identified 50 patients with a knee found suitable for UKR based on their standard and stress radiographs (full-thickness cartilage on lateral side). These patients underwent an additional cartilage-specific MRI scan to identify the status of ACL and the lateral compartment. The final decision regarding the suitability for UKR was based on the intra-operative observation.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XIV | Pages 21 - 21
1 Apr 2012
Gulati A Ashford R
Full Access

Aim

The aim of this study was to assess the financial implications of managing skeletal metastases in a tertiary hospital and explore its impact on the provision of acute care trauma services.

Methods

We identified 47 patients, surgically treated for skeletal metastases over one-year period. Data were collected on demographics, primary tumour, the bone involved, surgery performed, the type of prosthesis used, length of surgery, hospital stay and the exact indication for orthopaedic intervention. The cost incurred was calculated from the cost of the prosthesis implanted, the number of theatre-sessions utilised and the number of inpatient hospital days.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_IX | Pages 26 - 26
1 Mar 2012
Gulati A Pandit H Gill HS Price AJ Dodd CAF Murray DW
Full Access

INTRODUCTION

Mobile bearing unicompartmental knee replacement (UKR) is an accepted treatment for patients with isolated medial unicompartmental knee osteoarthritis (OA) with a full thickness cartilage loss. The aim of this study was to determine if this recommendation was correct and if the procedure could be used for partial-thickness cartilage loss.

METHODS

1053 Oxford medial UKRs were studied prospectively. The knees were divided into two groups; partial-thickness cartilage loss (PTCL) group and the full thickness-cartilage loss (FTCL) group. The primary outcome measure was the total Oxford Knee Score (OKS, 0 to 48) at the time of final follow up. The groups were also compared for the change in OKS (?OKS) and the proportion of patients that were considered to have benefited substantially from surgery (?OKS >5).


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_I | Pages 26 - 26
1 Jan 2011
Gulati A Glyn-Jones S Simpson D Palan J Beard D Gill H McLardy-Smith P Gundle R Murray D
Full Access

Roentgen Stereophotogrammetric Analysis (RSA) can predict long-term outcome of prostheses by measuring migration over time. The Exeter femoral stem is a double-tapered highly polished implant and has been shown to subside within the cement mantle in 2 year RSA studies. It has a proven track record in terms of long-term survivorship and low revision rates. Several studies have demonstrated excellent clinical outcomes following its implantation but this is the first study to assess stem migration at 10 years, using RSA.

This is a single-centre study involving 20 patients (mean age: 63 years, SD=7) undergoing primary total hip replacement for degenerative osteoarthritis using the lateral (Hardinge) approach. RSA radiographs were taken with the patient bearing full weight post-operatively, at 3, 6, 12 months and at 2, 5 and 10 years follow-up. The three-dimensional migration of the Exeter femoral stem was determined.

The mean Oxford Hip Score at 10 years was 43.4 (SD=4.6) and there were no revisions. The stems subsided and rotated internally during a 10-year period. The mean migrations of the head and tip of the femoral stem in all three anatomic directions (antero-posterior, medio-lateral & supero-distal) were 0.69 mm posterior, 0.04 mm lateral and 1.67 mm distal for the head and 0.20 mm anterior, 0.02 mm lateral and 1.23 mm distal for the tip. The total migration at 10 years was 1.81 mm for the head and 1.25 mm for the tip.

The Exeter femoral stem exhibits migration which is a complex combination of translation and rotation in three dimensions. Comparing our 10 year with our previous 2 year migration results, the Exeter stems show continued, but slow distal migration and internal rotation. The subsidence continues to compress the cement and bone-cement interface which maintains secure fixation in the long term.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 416 - 416
1 Jul 2010
Bottomley N McNally E Ostlere S Beard D Gill H Kendrick B Jackson W Gulati A Simpson D Murray D Dodd C Price A
Full Access

Introduction: This study explores whether modern magnetic resonance imaging (MRI) with improved cartilage sequencing is able to show a more detailed view of anteromedial osteoarthritis of the knee (AMOA). Preoperative assessment of patients and selection of intervention is very important and preoperative imaging forms an integral part of this. Modern MRI technology may allow us to visualize in great detail the structures and cartilage within the knee, providing a better understanding of the pathoanatomy of AMOA. This will be useful in preoperative assessment and surgical management of patients.

Methods: 50 patients with a radiographic diagnosis of anteromedial osteoarthritis of the knee and had been listed for unicompartmental knee arthroplasty (UKA) had MRI as part of their pre-op workup. At operation all were deemed suitable for UKA using the current Oxford indications. The image sequences were coronal, axial and sagittal with a predetermined cartilage protocol. The state of the ACL, cartilage wear location and pattern, presence of osteophytes and subchondral high signal were assessed.

Results: All the ACLs were visualized and in continuity, however 40% showed intrasubstance high signal.

100% of medial compartments showed full thickness anteromedial loss with preservation of the posteromedial cartilage. When present, the meniscus was extruded in 96% of cases.

90% of lateral compartments were normal and none had full thickness cartilage loss. However 10% showed high signal in the tibial plateau.

There was a highly reproducible pattern of osteophyte formation; 94% posteromedial and posterolateral aspect of medial femoral condyle; 90% medial tibial; 80% medial femoral and 84% lateral intercondylar notch.

Discussion: This study maps the pattern of anteromedial osteoarthritis using modern MRI techniques. This has importance in determining preoperative indications (preservation of ACL and posteromedial cartilage); surgical technique (determine pattern of osteophytes requiring resection) and potentially important for long-term outcome (early lateral compartment changes).


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 414 - 414
1 Sep 2009
Simpson D Pandit H Gulati A Gray H Beard D Price A Murray D Gill H
Full Access

Statement of purpose: The aim of this study is to evaluate different designs of unicompartmental knee replacement (UKR) by comparing the peak von Mises and contact stresses in polyethylene (PE) bearings over a step-up activity.

Summary of Methods: A validated finite element (FE) model was used in this study. Three UKR designs were modelled: a spherical femoral component with a spherical PE bearing (fully-congruent), a poly-radial femoral component with a concave PE bearing (semi-congruent), and a spherical femoral component with a flat bearing (non-congruent).

Kinematic data from in-vivo fluoroscopy measurements during a step-up activity was used to determine the relative tibial-femoral position as a function of knee flexion angle for each model. Medial and lateral force distribution was adapted from loads measured in-vivo with an instrumented implant during a step-up activity. The affect that varying the bearing thickness has on the stresses in the bearing was investigated. In addition, varus-valgus mal-alignment was investigated by rotating the femoral component through 10 degrees.

Summary of Results: Only the fully congruent bearing experienced peak von Mises and contact stresses below the PE lower fatigue limit (17MPa) for the step-up activity (fully congruent PE peak contact stress, 5MPa). The highest PE contact stresses were observed for the semi-congruent and non-congruent designs, which experienced approximately 3 times the PE lower fatigue limit. Peak PE von Mises stresses for the semi-congruent and non-congruent designs were similar, peaking at approximately 25MPa. Peak PE von Mises stresses were ameliorated with increased bearing thickness. Varus-valgus mal-alignment had little effect on the peak stresses in the three UKR designs.

Statement of Conclusions: Fully congruent articulating surfaces significantly reduce the peak contact stresses and von Mises stresses in the bearing. The FE model demonstrates that fully congruent bearings as thin as 2.5mm can be used without increasing the contact stresses significantly. Fully congruent designs can use thinner bearings and enable greater bone preservation.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 422 - 422
1 Sep 2009
Gulati A Chau R Palan J Rout R Dodd C Price A Gill H Murray D
Full Access

Purpose: To compare the site of lesions in medial and lateral unicompartmental osteoarthritis (OA) of the knee.

Methods: Patients with medial (n=35) and lateral (n=15) OA, having unicompartmental knee arthroplasty, were recruited. Intra-operatively, the distance between the anterior, posterior, medial and lateral margins of the full-thickness lesion and reference lines dividing the condyles was measured. The midpoints of lesions were calculated and groups were compared. Lateral radiographs were used to determine the relationship between the lesion site and knee flexion angle (KFA).

Results: Femoral lesion: In lateral OA, the midpoint of lesions was 25.0mm (SD:8.8) posterior to the reference line passing transversely through the apex of the inter-condylar notch. This was significantly different (p< 0.001) from midpoint in medial OA, which was 10.7mm (SD:9.4) posterior to the reference line.

Tibial lesion: In lateral OA, the midpoint of lesions was 2.0mm (SD:6.5) posterior to the reference line passing through the mid-coronal plane of the resected tibia. This was located significantly more posterior (p=0.038) than midpoint in medial OA, which was 2.2mm (SD:5.7) anterior to the reference line.

Knee Flexion Angle: In lateral OA, the midpoint of lesions was on average at 40° flexion and sites of smaller lesions were very variable. The lesion expanded both anteriorly and posteriorly. In medial OA, smaller femoral lesions occurred in full extension and extended further posteriorly with disease progression.

No significant difference was demonstrated in medial and lateral localisation of the lesions.

Conclusion: Medial OA begins near full extension, progresses in a predictable manner and is perhaps initiated by events occurring at heel strike. Lateral OA begins in flexion in a less predictable manner, at KFA above that seen during the gait cycle. The different sites of lesions in medial and lateral OA suggest different aetiology and pathophysiology. Therefore, prevention and treatment strategies should be different.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 411 - 412
1 Sep 2009
Chau R Gulati A Pandit HG Beard DJ Gill HS Dodd CAF Simpson DJ Murray DW
Full Access

Purpose: To evaluate the effects of underhanging/overhanging tibial components on clinical outcome following the Oxford unicompartmental knee arthroplasty (UKA), and to identify an acceptable sizing limit.

Method: One hundred and sixty-three knees which had undergone the Phase 3 medial Oxford UKA (Biomet, Swindon) were measured. Based on five-year post-operative radiographs, they were divided into groups with tibial component underhang (n=38), none or minimal overhang of less than three millimetres (n=121), and a group with overhang equal to or in excess of three millimetres (n=13). Clinical outcome was assessed by changes in the twelve-question Oxford Knee Score (ΔOKS) and pain score (ΔPS) component (questions 1,4,5,8,9) from pre-operative assessment to five years following surgery.

Results: At five years after surgery, ΔOKS was significantly worse in the overhang group compared to both the neutral and underhang groups (p=0.015, and p=0.028 respectively). ΔPS was also shown to be significantly worse between the overhang and the neutral group (p=0.026 respectively).

Conclusion: Appropriate sizing of the tibial component is essential to optimise load bearing in total knee arthroplasty. In UKA such sizing is critical due to halving of the bony support for the tibial component and the lack of room for a large stem. Excessive undersizing of the prosthesis may lead to subsidence and loosening, whilst excessive overhanging may cause local soft tissue irritation and pain.

This study demonstrates that medial overhang of less than three millimetres for the tibial component is acceptable in the Oxford UKA. Excessive overhang equal to this or more results in significantly worse ΔOKS and ΔPS. However, no difference in the five year ΔOKS and ΔPS was demonstrated between underhang and the other two groups in this study.