We describe the results of 81 consecutive revision
total hip replacements with impaction grafting in 79 patients using
a collared polished chrome–cobalt stem, customised in length according
to the extent of distal bone loss. Our hypothesis was that the features
of this stem would reduce the rate of femoral fracture and subsidence
of the stem. The mean follow-up was 12 years (8 to 15). No intra-operative
fracture or significant subsidence occurred. Only one patient suffered
a post-operative diaphyseal fracture, which was associated with
a fall. All but one femur showed incorporation of the graft. No
revision for aseptic loosening was recorded. The rate of survival of the femoral component at 12 years, using
further femoral revision as the endpoint, was 100% (95% confidence
interval (CI) 95.9 to 100), and at nine years using re-operation
for any reason as the endpoint, was 94.6% (95% CI 92.0 to 97.2). These results suggest that a customised cemented polished stem
individually adapted to the extent of bone loss and with a collar
may reduce subsidence and the rate of fracture while maintaining
the durability of the fixation.
Most of computer-assisted computer assisted system rely on the peri-operative acquisition of the anterior pelvic plane defined as the plane crossing the two anterior iliac spine and the symphysis. The goal of this study was to evaluate in vivo and in vitro the accuracy of the anterior pelvic plane acquisition, considered as the reference for computer-assisted total hip arthroplasty (THA). Cup placement was performed using an imageless computer-assisted system in thirty patients during THA. Post-operatively the position of the cup was evaluated on computed tomography using a validated tridimensional software. The differences between the perioperative and postoperative angles for abduction and anteversion were compared using a two-group pair test. On two cadavers four clinicians performed ten times the anterior pelvic plane acquisition using three Methods: percutaneously, with ultrasound and by direct bony acquisition defined as the reference. The mean error for each anterior pelvic plane acquisition method was compared using a univariate variance model for repeated measurements. In vivo, the mean difference between the perioperative and postoperative abduction angles was 4° and not statistically significant. For anteversion, the difference was 4° and not significant in patients with BMI <
27. The difference was 11° and significant in patients with BMI >
27 (p<
0.001). In vitro, the mean errors for rotation and tilt were respectively 3.8 ° and 19.25 ° for cutaneous acquisition, 2.8° and 6.2° for ultrasound acquisition method. The errors were statistically higher with the percutaneous method (p<
0.001). According to our results, the accuracy of the standard percutaneous acquisition method of the anterior pelvic plane in computer-assisted THA is limited. The ultrasound acquisition method may represent a reliable alternative.
Previosuly, Komistek et al. have shown that the kinematics of the patellofemoral joint is altered after a TKA surgery. Specifically the implanted patella experiences significantly less rotation than the natural patella. Also, in early flexion, the patellofemoral contact positions differed significantly between implanted and non-implanted patellae. It was also found that some of TKA subjects experience patellofemoral separation. These kinematical differences may lead to adverse mechanical conditions and increase fatigue or cause loosening of the implant components. This study’s objective was to determine the three-dimensional patellofemoral kinematics and correlate it with the in vivo sound (vibrations) detected using accelerometers for subjects having a TKA and a non-implanted knee under in vivo, weight bearing conditions. The correlation of the knee mechanical conditions with the vibration data may indicate new parameters that may be used to diagnose the condition of the articular cartilage or implant components. Fifteen subjects (average age 71.8 ±7.4years) having one implanted knee (mobile bearing Hi-Flex PS) and the healthy contralateral knee, performed
deep knee bend to maximum flexion, chair rise and stair climb activities under fluoroscopic surveillance. Three miniature, piezoelectric, three-axial accelerometers were attached to the patella and femoral epicondyle. The study was approved by the Institutional Review Board and informed consent was obtained from all subjects. The sensors detected the vibration magnitudes and frequencies of the articulating patellofemoral joint surfaces. The signals were amplified and low-pass filtered at 5 kHz by a signal conditioner. The 3D tibiofemoral and patellofemoral kinematics were derived for both knees using a previously published 3D-to-2D registration technique. The 3D bone models were recovered from CT scans, while implant models were obtained from the manufacturer. The patellofemoral rotations were described using the Grood and Suntay convention. The kinematics and sound data were synchronized and recorded under fluoroscopic surveillance, for 10 patients. Then a subset of seven subjects having a TKA was re-analyzed for their contralateral (non-implanted) knee. The vibration signal was then converted to audible sound and correlated with the 3D kinematics. On average, the subjects achieved more flexion with their TKA (103.4°±15.9°) than with their contralateral knee (96.3°±18.3°). The patellofemoral kinematics varied between the TKA and nonimplanted patella groups; the resurfaced patella experienced less flexion, less medial rotation and less tilt than the contralateral patella. The patellar flexion results were consistent with previously reported literature for both TKA and non-implanted patellae. Also, the resurfaced patellae contacted the femur more proximally than healthy patellae. Audible signals were found for both groups of subjects. The frequency analysis demonstrated that specific frequencies were in similar range for both groups, but the magnitudes and variations were different for the TKA and contralateral knees. This study correlated 3D patellofemoral kinematics with sound under in vivo conditions for three different activities. Variable audible signals were detected for TKA and non-implanted knees. Vibration magnitude and frequency identification, under in vivo conditions, for TKA may lead to a better understanding of wear and failure modes with respect to the patellofemoral mechanics, more specifically, the patellar insert. Currently this initial study is being expanded to degenerated knee joints and failed TKAs for possible applications of the vibration analysis to the early diagnosis of knee arthritis, detection of implant loosening or wear and monitoring of implant osteointegration progress.
Unicompartmental knee arthroplasty (UKA) is a logic procedure when osteoarthritis or avascular necrosis is limitad to one femorotibial compartment. The indications for the procedure includes osteoarthrosis or osteonecrosis with full-thickness loss of articular cartilage limited to one of the tibiofemoral knee compartments. Physical examination should ensure full range of knee motion. Frontal and sagittal knee stability has to be tested. A particular attention should be given to the state of the anterior cruciate ligament. The status of the patellofemoral joint should be analysed by physical examination and patellofemoral view at 30, 60 and 90° of flexion. Preoperative anteroposterior varus and valgus stress radiographs should be done to confirm the complete loss of articular cartilage in the involved compartment, the full thickness cartilage in the opposite compartment and the possibility of full correction of the deformity to neutral. The so-called minimally invasive surgery (MIS) procedure using a specific instrumentation is able to provide quicker recovery since the extensor mechanism disruption is eliminated. More importantly the radiological evaluation has shown that precise implantation of the components is possible with an MIS approach which is important for the long term results of the arthroplasty. The clinical results at ten years of follow-up of cemented metal-backed UKA performed through a conventional approach have shown results comparable to those obtained with total knee arthroplasty. The in vivo kinematic evaluation of patients implanted with UKA has shown that kinematics similar to the normal knee can be obtained, enhancing the importance of a functional anterior cruciate ligament. Recent design improvements have increased the femorotibial area of contact to accommodate high flexion angles. Additionally our experience has demonstrated that modern UKA is a valid alternative for young and active patients with unicompartmental tibiofemoral noninflammatory disease, including both osteoarthritis and avascular necrosis. Compared to medial UKA lateral UKA represents in our experience only 5% of all UKA implantations. However the long term results of lateral UKA compares at least equally with those reported for medial UKA.
objective and subjective functional improvement; patient satisfaction and preference and cost-utility ratio after gender specific TKA or standard component implanted on the same women.
At 10 years we have a survivorship, if femoral aseptic loosening is used as an end point, of 97.6%. There was a deep infection rate of 1.2%, and a dislocation rate of 1.9%. There were no cases of thigh pain, and no intra-operative femoral neck/shaft fractures.
A clinical and radiographic study was conducted on 97 total hip arthroplasties (79 patients) performed for congenital hip dislocation using three-dimensional custom cementless stem. The mean age was 48 years (17 to 72). The mean follow up was 123 months (83 to 182). According to Crowe, there were 37 class 1, 28 class 2, 13 class 3 and 19 class 4. The average lengthening was 25 mm (5 to 58 mm), the mean femoral anteversion 38.6° (2° to 86°) and the correction in the prosthetic neck −23.6° (71° to 13°). The average Harris hip score improved from 58 to 93 points. Six hips (6.2%) required a revision. The survival rate was 97.7% ± 0.3% at 13 years. Custom cementless stem allows anatomical reconstruction and good functional results in a young and active population with disturbed anatomy, while avoiding a femoral osteotomy.
all three cuts are performed via a single intra-pelvic approach; For severe extreme dysplasia (Hip Study Group classification), a two-thirds triple osteotomy is performed (original technique). Currently the best indication appears to be a young patient (less than 30 years) with moderate to severe dysplasia, without intra-articular suffering and without any sign of early stage joint degradation.
A clinical and radiological study was conducted on 97 total hip replacements performed for congenital hip dislocation in 79 patients between 1989 and 1998 using a three-dimensional custom-made cementless stem. The mean age at operation was 48 years (17 to 72) and the mean follow-up was for 123 months (83 to 182). According to the Crowe classification, there were 37 class I, 28 class II, 13 class III and 19 class IV hips. The mean leg lengthening was 25 mm (5 to 58), the mean pre-operative femoral anteversion was 38.6° (2° to 86°) and the mean correction in the prosthetic neck was −23.6° (−71° to 13°). The mean Harris hip score improved from 58 (15 to 84) to 93 (40 to 100) points. A revision was required in six hips (6.2%). The overall survival rate was 89.5% (95% confidence interval 89.2 to 89.8) at 13 years when two hips were at risk. This custom-made cementless femoral component, which can be accommodated in the abnormal proximal femur and will correct the anteversion and frontal offset, provided good results without recourse to proximal femoral corrective osteotomy.