We aimed to obtain anthropometric data on Korean knees and to compare these with data on commonly available total knee arthroplasties (TKAs). The dimensions of the femora and tibiae of 1168 knees were measured intra-operatively. The femoral components were found to show a tendency toward mediolateral (ML) under-coverage in small femurs and ML overhang in the large femurs. The ML under-coverage was most prominent for the small prostheses. The ML/anteroposterior (ML/AP) ratio of Korean tibiae was greater than that of tibial components. This study shows that, for different reasons, current TKAs do not provide a reasonable fit for small or large Korean knees, and that the ‘gender-specific’ and ‘stature-specific’ components help for large Korean femurs but offer less satisfactory fits for small femurs. Specific modifications of prostheses are needed for Asian knees

We investigated factors associated with postoperative lipiduria and hypoxemia in patients undergoing surgery for orthopedic fractures. We enrolled patients who presented to our emergency department due to traumatic fractures between 2016 and 2017. We collected urine samples within 24 hours after the patients had undergone surgery to determine the presence of lipiduria. Hypoxemia was defined as an SpO2 <95% determined with a pulse oximeter during the hospitalization. Patients’ anthropometric data, medical history, and laboratory test results were collected from the electronic medical record. Logistic regression analyses were used to determine the associations of clinical factors with postoperative lipiduria and hypoxemia with multivariate adjustment. A total of 144 patients were analyzed (mean age 51.3 ± 22.9 years, male 50.7%). Diabetes (odd ratio 3.684, 95% CI 1.256-10.810, p=0.018) and operation time (odd ratio 1.005, 95% CI 1.000-1.009, p=0.029) were independently associated with postoperative lipiduria, while age (odd ratio 1.034, 95% CI 1.003-1.066, p=0.029), body mass index (odd ratio 1.100, 95% CI 1.007-1.203, p=0.035), and operation time (odd ratio 1.005, 95% CI 1.000-1.010, p=0.033) were independently associated with postoperative hypoxemia. We identified several factors independently associated with postoperative lipiduria and hypoxemia in patients with fracture undergoing surgical intervention. Operation time was associated with both postoperative lipiduria and hypoxemia, and we recommend that patients with prolonged operation for fractures should be carefully monitored for clinical signs related to fat embolism syndrome

Introduction. Distraction histogenesis is utilised for cosmetic reasons in patients with constitutional short stature, achondroplasias, or height dysphoria. One of the considerations of patients and surgeons alike, is the preservation of aesthetically acceptable body proportions after the lengthening i.e which segment of the lower limb to lengthen and by how much, in order to preserve the patient's proportions within -or as close as possible to- the normal range of human body proportions. Sound anthropometric data on the normal range of the human body proportions is currently lacking. The aim of this study is to calculate the normal range of the ratio between the lengths of the lower limb, upper limb, femur, tibia, stature and trunk. Methods. Data form standardized measurements of the lengths of the tibia, femur, arm, stature, lower limb, upper limb was obtained from a sample population of 6068 healthy men and women servicing in the US Army. The mean, median, range and standard deviation were calculated for the following ratios of lengths: whole lower limb/leg, Stature/leg, Whole lower limb/thigh, Stature/thigh, Siting height/whole lower limb, Stature/Whole lower limb, Arm Span/Stature, Whole upper limb/Whole lower limb. Results. The ratios show normal distribution. Results are presented separately for men and women for the total sample population and for subgroups based on ethnic origin (White, Black, Hispanic and Asian). Discussion. This study is one of the first to provide specific anthropometric data from a large sample population relevant to the evidence-based preoperative planning and patient counselling before cosmetic limb lengthening procedures

Aim. This study aims to define the normal postoperative presepsin kinetics in patients undergoing primary cementless total hip replacement (THR). Methods. Patients undergoing primary cementless THR at our Institute were recruited. At enrollment anthropometric data, smocking status, osteoarthritis stage according to Kellgren and. Lawrence, Harris Hip Score (HHS), drugs assumption and comorbidities were recorded. All the patients underwent serial blood tests, including complete blood count, presepsin (PS) and C-Reactive Protein (CRP) 24 hours before arthroplasty and at 24-, 48-, 72- and 96-hours postoperatively and at 3-, 6- and 12-months follow-up. Statistical analysis was performed with SPSS v25.0 (SPSS Inc, Chicago, IL, USA). The Wilcoxon and Kruskal-Wallis tests followed by the Dunn multiple comparison post hoc tests were carried out. Correlations between PS, CRP and TOT were assessed using the Spearman rank correlation coefficient. P values below 0.05 were considered significant. Results and conclusion. A total of 96 patients were recruited (51 female; 45 male; mean age= 65.74±5.58) were recruited. The mean PS values were: 137.54 pg/ml at baseline, 192.08 pg/ml at 24-hours post-op; 254.85 pg/ml at 48-hours post-op; 259 pg/ml at 72-hours post-op; 248.6 pg/ml at 96-hour post-op; 140.52 pg/ml at 3-months follow-up; 135.55 pg/ml at 6-months follow-up and 130.11 pg/ml at 12-months follow-up. In two patients (2.08%) a soft-tissue infection was observed; in these patients higher levels (>350pg/mL) were recorded at 3-months follow-up. The lack of a presepsin decrease at 96 hours post-operatively should be a predictive factor of infection

Recently a great amount of research has been conducted into fatigability of paraspinal muscles in relation to Lower Back Pain (LBP). Additionally relationships have been observed between a general level of “fitness” and LBP. This research project aimed to evaluate the influence of aerobic fitness and health on lower back muscle function as measured by Electromyographic (EMG) spectral parameters. Participants undertake a series of psychometric tests, anthropometric data collection, EMG spectral analysis of the paraspinal muscles at lumbar and thoracic regions, and an aerobic fitness test. The EMG test involves a 30-sec isometric pull against a load normalised for weight. The spectral half-width, initial median frequency and median frequency slope are calculated. Participants are given biofeedback and exercise advice. Participants in this study were of above average fitness level compared to normative data. Other anthropometric data were similar to previous work conducted within this department. Preliminary regression analysis results have revealed no relationships between aerobic fitness level and EMG parameters, a finding that is counter to current beliefs on LBP and fitness, however it was observed that age did significantly influence lumbar spectral variable values (p = .002). A similar psychological profile was observed for all fitness levels

As for the number of patients who requires total knee arthroplasty (TKA), Asian-Pacific countries will be the most important market. However, due to the paucity of anthropometric data on the proximal tibia in this population, many prostheses designed for Caucasian knees have been introduced without specific modification.The aim of the current study was to analyze the geometry of the proximal tibia to design the optimum component for the Japanese population. Anthropometric data on the proximal tibia of 100 knees in 80 patients undergoing TKA was obtained. Briefly, anterior-posterior (AP) and medial-lateral (ML) lengths were measured with a combination of two different methods, namely on the computed tomography (CT) images obtained preoperatively and intraoperative direct measurement on tibial resection surface. Reproducible measurement was possible only when the intraoperative measurement was combined with the corresponding CT images while the direction of measurements being aligned to the epicondylar axis of the femur. It was shown that smaller components with an ML of around 60 mm were rarely required. Tibial component size variation should focus on an ML length of 65 to 75 mm because 76 of 100 knees (76 %) fell into this size range. When the subjects were confined to women, 70 of 77 knees (91%) were included in this size range. The intraoperative AP to ML ratio had a negative correlation with the ML length (r = −0.412, P < 0.0001) indicating that bigger knees were shallower in the AP direction. The size variation of currently popular pros-theses were not in accordance with the geometry of the tibial resection surface shown in this study. The results of this study applied to a cross-section of the Japanese population can be used by manufacturers to create a prosthesis suitable for most of the Asian-Pacific population

Introduction. Hip arthroplasty is considered common to patients aged 65 and over however, both Jennings, et al., (2012) and Bergmann (2016) found THA patients are substantially younger with more patients expecting to return to preoperative activity levels. With heavier, younger, and often more active patients, devices must be able to support a more demanding loading-regime to meet patient expectations. McClung (2000) demonstrated that obese patients can display lower wear-rates with UHMWPE bearing resulting from post-operative, self-induced reduced ambulatory movement, thus questioning if obese kinematics and loading are indeed the worst-case. Current loading patterns used to test hip implants are governed by ISO 14242-1 (2014). This study aimed to characterize a heavy and active population (referred to as HA) and investigate how the gait profile may differ to the current ISO profile. Method. A comprehensive anthropometric data set of 4082 men (Gordon, CC., et.al., 2014) was used to characterize a HA population. Obese and HA participants were classed as BMI ≥30 however HA participants were identified by applying anthropometric ratios indicative of lower body fat, namely “waist to height” (i.e. WHtR <0.6) and “waist to hip” (i.e. WHpR <0.9). Findings. Of 491 obese participants 61 were identified as HA (i.e. BMI> 30, WHpR<0.9; WHtR<0.6) (Figure 1). These characteristics were validated against a population of elite rugby players that were found to be a true reflection of HA patients (Figure 2). Combining the Army and Rugby populations resulted in a weight of 123kg for the 95. th. percentile, which based on 3× body weight (as referenced in ISO14242-1) would equate to a peak simulator load of 3620N. Conclusion. Characterization of a HA population was successfully defined as clinically obese by BMI, but with WHtR and WHpR associated with lower body fat. The author was unable to identify gait characteristics of a HA population through existing literature. Future Work. A gait-lab based study will be used to compare literature-based kinematics of obese subjects to those of HA subjects. A worst-case gait cycle can then be established for standard walking and other activities and translated into hip simulator parameters for HA patients

Designs of medical devices are tested for their mechanical behaviour, ability to transfer the load that is normally bore by the healthy tissue, and prove of the resistance to fatigue. The virtual testing in silico is widely accepted technique based on three sets of input data – geometry is normally obtained from CT or MRI scan as well as the tissue density that is translated into mechanical properties of the tissue. The virtual behaviour of the system is controlled by set of constrains accordingly while the third set of data consist of the load that system normally transfers through the load-bearing tissue. The magnitude and character of the load is highly dependent on the physical activity, external loads, physical condition of the subject and its specific factors such as gender, health condition, etc. Most of the published simulations use estimated simplified loads, which barely simulate the real behaviour of the system. The evaluation of the spinal load published some years back estimated a normal (N) and shear force (S) accompanied by the flexing moment (M). Due to lack of experimental possibility we used these data to test the biomechanical response of the lumbar segment with isotropic material models of all tissues. Then we investigated the possibility to evaluate muscular forces and their recruitment. It is a complex task and even today it is not possible to measure directly in vivo all muscular forces contributing to the movement. The musculo-skeletal system is a statically indeterminate system. The forces can be solved by means of computational modelling based on the measured trajectories of the body motion and additional optimization functions combined with static equations. The trajectories were recorded by the fast camera system in our motion laboratory and consequently exported into an open simulation software that uses a generic skeleton with around two hundreds muscle fascicles. The skeleton was scaled to correspond to our subject's anthropometric data and further scaling to mock-up the generic vertebrae was performed to eliminate discrepancies between the generic and subject's bones. Once these adjustments were done a kinematics and inverse dynamics modules were engage with selected objective function controlling the muscular recruitment that the max. relative muscular force is as small as possible. The 84 muscular forces acting on the segment were exported to a text file in APDL language and uploaded in the Finite Element (FE) database. The results of FE analysis were compared to the results obtained earlier using N,S,M load [1]. The comparison between the two models shows that the results of segment's total displacement was reduced by 36 percent compared to initial results. The stress and stress intensity increased six times. The identical model with orthotropic material showed reduced displacement by 80 percent and the stress and stress intensity was reduced by 60 percent compared to initial results

Introduction. The purpose of this study was to experimentally evaluate impingement and dislocation of total hip replacements while performing dynamic movements under physiological-like conditions. Therefore, a hardware-in-the-loop setup has been developed, in which a physical hip prosthesis actuated by an industrial robot interacts with an in situ-like environment mimicked by a musculoskeletal multibody simulation-model of the lower extremity. Methods. The multibody model of the musculoskeletal system comprised rigid bone segments of the lower right extremity, which were mutually linked by ideal joints, and a trunk. All bone geometries were reconstructed from a computed tomography set preserving anatomical landmarks. Inertia properties were identified based on anthropometric data and by correlating bone density to Hounsfield units. Relevant muscles were modeled as Hill-type elements, passive forces due to capsular tissue have been neglected. Motion data were captured from a healthy subject performing dislocation-associated movements and were fed to the musculoskeletal multibody model. Subsequently, the robot moved and loaded a commercially available total hip prosthesis and closed the loop by feeding the physical contact information back to the simulation model. In this manner, a comprehensive parameter study analyzing the impact of implant position and design, joint loading, soft tissue damage and bone resection was implemented. Results. The parameter study revealed a generally high dislocation risk for the seating-to-rising with adduction scenarios. Improper implant positioning or design could be compensated by adjusting prosthesis components correspondingly. Gluteal insufficiency or lower joint loading did not result in higher impingement or dislocation risk. However, severe malfunction of the artificial joint was found for proximal bone resection. Discussion. Previous testing setups ignored the impact of active muscles or relied on simplified contact mechanics. Herein, total hip replacement stability has been investigated experimentally by using a hardware-in-the-loop simulation. Thereby, several influencing factors such as implant position and design as well as soft tissue insufficiency and imbalance could be systematically evaluated with the goal to enhance joint stability

Introduction & aims. Different racial groups show variations in femoral morphometry. Femoral anteroposterior measurement and mediolateral measurement are key variables in designing femoral implant for TKR. Their aspect ratio determines the shape and mediolateral sizing for the proper patellofemoral tracking and uniform stress distribution over the resected distal femoral surface. Method. We reviewed the current literature in December 2013 in common medical databases including the Cochrane Library, PubMed and Medline. Keywords included combinations of: Anthropometry, Knee, Arthroplasty, Femur, Morphometry, Geometry. We selected papers including femoral morphometric data collected from populations of different ethnic origins. Papers covered populations in the USA, China, Germany, Thailand, Korea, India, Japan and Malaysia. Results. We have analysed femoral morphometry variables among different ethnic groups from the available data. Gross size of the resected femur can be defined in terms of antero-posterior (AP) and medio-lateral (ML) dimensions, an in the aspect ratio of femoral medio-lateral to femoral antero-posterior dimensions (fML/fAP). The Korean population showed the least value of fAP among all the groups, followed by Thai, Japanese, Indian, Malaysian and Chinese showing the increasing order among the sub-groups of Asian Population. American population shows the next higher fAP measurements from Asian population. German follows, and Arab quantify the largest value of this femoral anthropometric variable. fML varies by huge difference among male and female data in all populations. Thai, Indian, Malaysian, Arab, Japanese, Korean, German, Chinese and American; this sequence is the increasing order of fML. More trapezoid-shaped and narrower ML, this variation in female group leads to over-hang the implant for a given fAP. Generally, the aspect ratios are measured higher in these smaller female knees, and lower in larger male knees. Conclusions. Anthropometric data measuring distal femoral segment in different ethnic groups shows that the Asian population requires custom-fit implant design based on the morphological data. It would be more appropriate to introduce several medio-lateral options in sizing the implant for given antero-posterior dimensions

We report the outcome of 161 of 257 surgically fixed acetabular fractures. The operations were undertaken between 1989 and 1998 and the patients were followed for a minimum of ten years. Anthropometric data, fracture pattern, time to surgery, associated injuries, surgical approach, complications and outcome were recorded. Modified Merle D’Aubigné score and Matta radiological scoring systems were used as outcome measures. We observed simple fractures in 108 patients (42%) and associated fractures in 149 (58%). The result was excellent in 75 patients (47%), good in 41 (25%), fair in 12 (7%) and poor in 33 (20%). Poor prognostic factors included increasing age, delay to surgery, quality of reduction and some fracture patterns. Complications were common in the medium- to long-term and functional outcome was variable. The gold-standard treatment for displaced acetabular fractures remains open reduction and internal fixation performed in dedicated units by specialist surgeons as soon as possible

Introduction. Precise implant matching with a resected bony surface is a crucial issue to ensure a successful total knee arthroplasty (TKA). Extremely undersized or oversized components should be avoided. Therefore, we should measure the exact anthropometric data of the resected bony surface preoperatively or intraoperatively. The purpose of this study was to intraoperatively analyze the exact anthropometric proximal tibial data of Japanese patients undergoing TKA and correlate these measurements to the dimensions of current prosthetic systems. Patients and Methods. Three hundred and seventy-three knees in 299 Japanese patients were included in this study. There were 246 women and 53 men with a mean age of 74 (range: 63–85) years. All TKAs were performed by 3 senior surgeons (TS, AK, and NM). The bone cut in the proximal tibia was made perpendicular to the longitudinal axis of the tibia in the frontal plane. Intraoperative measurements of the proximal tibial cut surface were taken after proximal tibial preparation. Akagi's line (center of the posterior cruciate ligament tibial insertion to the medial border of the patellar tendon attachment) was adopted as the anteroposterior axis line of the proximal tibia. A mediolateral (ML) line was drawn perpendicular to Akagi's line. Then, anteroposterior (AP), lateral anteroposterior (lAP), and medial anteroposterior (mAP) lines were drawn as shown in Figure 1. Results. There was a significant positive correlation between lAP and ML dimensions. Although there also was a significant positive correlation between lAP and mAP dimensions, individual knees presented much scatter (Figure 2). The lAP dimension was smaller than the mAP dimension in all knees by a mean of 4.5 ± 1.9 mm. The proximal tibia exhibited asymmetry between the lateral and medial plateaus. The recent data of 177 knees indicated that Akagi's line was located 1.0 ± 1.2 mm medial to the AP line. A comparison of the morphologic data and the dimensions of the implants, one of which was a symmetric tibial component (NexGen: Zimmer, Warsaw, Indiana), and the other asymmetric (Genesis II: Smith & Nephew, Memphis, Tennessee), indicated that an asymmetric tibial component could be beneficial in maximizing the coverage of the tibial plateau. However, the size variation of the asymmetric tibial component was poor and the lAP and mAP dimensions showed much scatter; thus, we should measure the proximal tibia and choose the proper tibial component during surgery. Conclusions. This study provides important reference data that may be useful for designing proper tibial components for Japanese patients

Purpose: The purpose of the study is to measure the resected surface of femur of the Korean patients during total knee arthroplasty surgery and to compare these measurements with the dimensions of femoral implants in current use. Materials and Methods: Morphometric data (7 parameters) were obtained in 500 cases of resected femur of the Korean patients who underwent total knee arthroplasties, and these data were compared with four current implants designs. Results: The range of medial-lateral width at the given implant varies widely. The anterior width of the resected femur at the condyle is smaller than the widths of the most implants, creating an overhang. The medial-lateral width of the condyle at the level of transepicondylar line is wider than most of the present implants. However the widths of the resected posterior condyles were narrower at anterior-posterior alignment, causing overhang at the posterior condyles. We felt this will cause anterior tensioning at flexion and reduce the ability to flex further. Conclusion: The shape of the femur in Korean knee is different from that of current TKR implants in use, which are based on the anthropometric data of Caucasians. Therefore new design, better suited to the morphometric measurements of Korean knee, is necessary. Though historically this mismatch of the implant was well tolerated, new design to better fit the measurement of Korean knee should be considered for functional enhancement such as range of motion, durability and function

Most studies on LBP have focused on adults although many investigations have shown that the roots of LBP lie in adolescence. Several mechanical, physical and behavioral factors have associated with non-specific LBP in adolescents. To our knowledge no previous study has investigated using advanced statistics all previously reported parameters together with psychological and psychosocial factors on LBP in adolescents aged 15–19 years. 688 students aged 16± 1 years from 5 randomly selected high schools participated in this multifactorial study and completed a questionnaire containing questions on daily activity, backpacks carrying, psychological and psychosocial behavior. Anthropometric data as well biplane spinal curvatures together with questionnaire results were included in the analysis using advanced statistics. LBP reported 41% of the participants. Generally, statistically significant correlations were found between LBP(0.002), physical activity(P< 0.001), physician consultation(P=0.024) and depression (P< 0.001) Gender-related differences were shown regarding LBP intensity(P=0.005) and frequency(P=0.013), stress(P< 0.03), depression (P=0.005) and nervous mood(P=0.036) in favor of male students. Male adolescents had continuously energy (P=0.0258) and were calm (P=0.029) in contrast to female counterparts. LBP was gender-related and was less common in adolescents with frequent activity. Adolescent girls with stress, depressive mood and low energy have more LBP than boys that makes physician consultation for LBP more common in female adolescents. Systematic physical activity and control of psychological profile should decrease LBP frequency and intensity

The purpose was to investigate back pain and disability and their relationship to vertebral changes in patients with untreated Scheuermann's. Overall, 136 patients who had attended the outpatient clinics between 1950 and 1990 for Scheuermann's were contacted, 49 of them (12 females, 37 males) responded. There was no difference in the baseline data between responders and non-responders. From radiographs, th-kyphosis, l-lordosis, and scoliosis were measured. The number of affected vertebrae and the degree of wedging were registered. Anthropometric data, occurrence of back pain, disability scores, and employment status were compared to a representative sample (n=3835) of the normal population. After mean follow-up of 37 (6.5;25.9-53.7) y, their average age was 58.8 (8.2;44.4.-79.3) y. Male patients were significantly taller than the control subjects. Female patients were on average 6 kg heavier (P=0.016) and their mean BMI was higher (23.9 kg/m. 2. vs 20.8 kg/m. 2. ,P=0.001) at age 20 than in the controls. Females had a greater mean kyphosis than males (51.7 vs. 43.2°, p=0.11). There was no correlation between the degree of thoracic kyphosis and disability. Scheuermann's patients had an increased risk for constant back pain (P=0.003), a 2.6-fold risk for disability because of back pain during the past 5 years (P=0.002), a 3.7-fold risk for back pain during the past 30 days (P<0.001), and a 2.3-fold risk for sciatic pain (P=0.005). They reported a poorer quality of life (p<0.001) and general health (p<0.001). There was no difference in working ability and employment status between patients and controls

Study design: Prospective multifactorial study on low back pain (LBP) in adolescents. Background data: Most studies on LBP have focused on adults although may investigations have shown that the roots of LBP lie in adolescence. Several mechanical, physical and behavioral factors have associated with non-specific LBP in adolescents. To our knowledge no previous study has investigated using advanced statistics all previously reported parameters together with psychological and psychosocial factors on LBP in adolescents aged 15–19 years. Material and Methods: 688 students aged 16± 1 years from 5 randomly selected high schools participated in this study and completed a questionnaire containing questions on daily activity, backpacks carrying, psychological and psychosocial behavior. Anthropometric data as well biplane spinal curvatures together with questionnaire results were included in the analysis using advanced statistics. Results: LBP reported 41% of the participants. Generally, statistically significant correlations were found between LBP(0.002), physical activity(P< 0.001), physician consultation(P=0.024) and depression (P< 0.001) Gender-related differences were shown regarding LBP intensity(P=0.005) and frequency(P=0.013), stress(P< 0.03), depression (P=0.005) and nervous mood(P=0.036) in favor of male students. Male adolescents had continuously energy (P=0.0258) and were calm (P=0.029) in contrast to female counterparts. Discussion: LBP was gender-related and was less common in adolescents with frequent activity. Adolescent girls with stress, depressive mood and low energy have more LBP than boys that makes physician consultation for LBP more common in female adolescents. Conclusion: Systematic physical activity and control of psychological profile should decrease LBP frequency and intensity

Introduction: The foot is a very complex structure acting as the platform for all gait patterns. At present, little is known about the exact biomechanics of the foot due to the difficulties in modeling all of the components of the foot accurately. This has made it virtually impossible to develop a complete understanding of the aetiology of many diseases of the foot including hallux rigidus. We hypothesize that sagittal plane incongruency of the rotation of the 1. st. Metatarsophalangeal Joint (MTPJ), or an increase in the tension of the intrinsic plantar flexors is responsible for the development of hallux rigidus. Materials & Methods: Ground reaction forces and kinematic data from gait analysis together with anthropometric data from MRI scans of a 24 y.o. female were used to create a Mimics model of the articulation of a normal 1st MTPJ during a gait cycle. The centre of rotation was calculated by triangulating the articular surfaces. Finite element analysis was performed on the model and on similar models with the hypothesized;. joint incongruency,. an increased tension in the Flexor Hallicus Brevis and. an increased tension in the plantar fascia. Results: The results demonstrated a significant increase in the peak stresses, contact areas and stress distributions between the incongruent models compared to the congruent models. Discussion: To the best of our knowledge this is the most accurate FE model of the 1st MTPJ calculated. Hallux Rigidus is a very common forefoot disorder, with multiple etiologies and treatments advocated. This model demonstrates that an increased tension in the plantar flexors results in a reduced ROM with increased contact stresses on the joint surface. Conclusion: While it is known Hallux Rigidus has a multi-factorial etiology, the authors feel the above study demonstrates an important inherent etiology

Aims

The aim of this investigation was to compare risk of infection in both cemented and uncemented hemiarthroplasty (HA) as well as in total hip arthroplasty (THA) following femoral neck fracture.

Aims

The purpose of this study was to evaluate the mid-term outcomes of autologous matrix-induced chondrogenesis (AMIC) for the treatment of larger cartilage lesions and deformity correction in hips suffering from symptomatic femoroacetabular impingement (FAI).

The incidence of acetabular fractures within the UK is about 3 in 100,000 of the population per year. Since Letournel and Judet first proposed that operative reduction and rigid internal fixation of displaced fractures will likely lead to better outcome, operative management of such fractures has become standard management in major trauma centres. Long term outcome results following acetabular surgery have been reported sparingly. Two hundred and fifty-seven displaced acetabular fractures underwent an open reduction and internal fixation at St. George’s Pelvic Unit between 1992 and 1997. All surgery was performed by a single surgeon. 161 patients were followed up prospectively for a minimum of 10 years. Those lost to follow up were excluded. Anthropometric data, fracture pattern, time to surgery, associated injuries, approach, complication and outcome recorded on a database. Modified Merle D’ Auberge score was utilized as outcome measures. The mean age was 36 years (15 to 85). Road traffic accident was the commonest mechanism of injury. We observed simple fractures in 34 % and associated fractures in 66%. 52% suffered polytrauma. Average time to surgery was 11 days and anatomic reduction was achieved in 73.9%. Results were excellent 46.8 %, good 25.5 %, fair 7.5 %, and poor 19.2 %. Poor prognostic factors were increasing age, delayed surgery, poor reduction, and posterior column, transverse posterior wall and T-shaped fracture patterns. Acetabular surgery poses a major challenge to the trauma surgeon. Complications in the immediate, mid and long term are not rare. Our results compare to other series with shorter follow-up. We believe that the gold standard treatment for displaced acetabular fractures must be open reduction internal fixation performed by a dedicated pelvic surgeon at the earliest time possible. Moreover whether we are merely postponing the inevitable post-traumatic arthritis is still unknown