Acetabular bone structure is not the same in all patients and can be defined by the radiolucent triangle superior to the acetabulum. We ask if the acetabular anatomy determines the initial cup fixation and screws use.

We have assessed 205 hips in which a Cerafit cementless cup was implanted. According to Dorr et al., acetabulae were classified as type A, in which the radiolucent triangle had an isosceles shape (86 hips), type B, in which the triangle extended into the teardrop (90 hips), and type C which had a right-angle triangle (29 hips). The use of screws was decided at the time of surgery and according to cup stability, not acetabular anatomy.

Avascular necrosis and inflammatory arthritis were the most frequent diagnoses in type A hips, osteoarthritis in type B, and dysplasia in type C. Women were more frequent in types A and C (p< 0.001). The use of screws was more frequent in women (p< 0.001) and in type A (34.9%) and type C hips (62.1%) than in type B hips (20.0%) (p< 0.001). The multivariate logistic regression model showed the acetabular type (p=0.11) and gender (p=0.003) as independent factors. Acetabular types A (OR=1.98, 95% CI: 0.922–4.208, p=0.075) and C (OR=5.09, 95% CI: 1.74–14.9, p=0.003) increase the risk for screw use. Men have a lower risk for screw use (OR=0.329, 95% CI: 0.16–0.68, p=0.003).

Acetabular anatomy and gender determine the use of screws in cementless cups. Continued follow-up is necessary to determine if screws results in less loosening and osteolysis.

The biological response to implant-derived wear particles is recognized as one of the main factors involved in the development of periprosthetic osteolysis. Wear particles induce a foreign-body inflammatory response that results in the formation of a periprosthetic membrane and progresses over time to aseptic loosening and implant failure. Upon exposure to particles, macrophages and other cell types release inflammatory cytokines to the periprosthetic milieu such as inter-leukin-1 beta (IL-1 beta, tumor necrosis factor-alpha (TNF-alpha) and interleukin-6 (IL-6) which contribute to bone resorption. Heat shock proteins (HSP) are intra-cellular proteins involved in the maintenance of cellular homeostasis. The stress inducible form of the Hsp70 family protein, Hsp72, has been detected in circulation, acting as a factor capable of regulating pro-inflammatory cytokines secretion and it has been demonstrated that induces the production of pro-inflammatory cytokines via the CD14 and Toll-like receptor-mediated signal transduction pathway.

We hypothesized that Hsp72 could be involved in the inflammatory response to wear particles. To this aim, we investigated Hsp72 and its receptor, CD14, in interfacial membrane specimens obtained from patients undergoing revision surgery for aseptic loosening of uncemented acetabular cups (n=7). Distribution of both proteins was assessed by immunofluorescence and examined by confocal laser scanning microscopy. Hsp72 was detected in the periprostehetic membranes, colocalizing with CD14. Explants of membranes were cultured in vitro and levels of Hsp72 and IL-6 were determined by ELISA after 24, 48 and 72 h (n=9). Cultured membranes released IL-6 to culture medium in a time-dependent manner (p< 0.05), while Hsp72 levels decreased during same observation period (p< 0.05). These data suggest that, rather than being produced by the periprosthetic tissue, Hsp72 might be recruited by CD14+ cells from extracellular fluids. In this regard, preliminary data indicated that soluble Hsp72 levels in sera from patients undergoing revision surgery due to aseptic loosening were significantly lower than those from age-matched control subjects (n=6; p< 0.001). To investigate the involvement of Hsp72 in the inflammatory response to wear particles, we used a cell culture model of THP-1 cells driven to the monocyte/macrophage differentiation pathway. These cells were exposed to titanium particles of phagocytosable sizes, either in the presence or absence of exogenously added Hsp72. results obtained to date indicate that Hsp72 is able to modulate the titanium-induced TNF-alpha, IL-1 beta and IL-6 secretion (p< 0.05). Altogether, our data suggest that Hsp72 could be a novel mediator involved in wear particles-induced osteolysis and prosthetic failure.

Introduction: Severe stress shielding and radiographic cortical changes in the proximal femur are frequent after extensively porous-coated stem in revision surgery. We have analyzed the evolution of the femoral cortex at different levels and related factors.

Material and Methods: We assessed 95 extensively porous-coated stems in revision surgery with a minimum 5-year follow-up (Mean 10.2 years). 77 hips were revised due to aseptic loosening and 18 due to periprosthetic fractures. Extended osteotomy was used in 29 hips. No cortical struts were used. Preoperative and postoperative osteoporosis was graded according to Moreland and bone defect according to Paprosky. Femoral cortex width was measured at different levels in the immediate postoperative radiograph, at 3, 6 and 12 months and at the last follow-up.

Results: There were 2 re-revisions for aseptic loosening. Radiographic ingrowth fixation was more frequent in minor intraoperative bone defects (p=0.011). Preoperative osteoporosis was related to the width of the medial and lateral cortex. Medial cortical thickness increased at different levels with a mean increase of 13.4% (p< 0.001) and the lateral cortical thickness showed a mean decrease of 2.7% at the proximal level. The femoral medial cortex tended to show a higher slope trend in periprosthetic fractures (p=0.015). The outside femoral diameter increased more rapidaly with an extended trochanteric osteotomy (p=0.007). The slope trend of the lateral and medial cortex was significantly higher at proximal levels in hips with a 10-inch stem (p=0.015).

Conclusions: Although without clinical relevance at the end of follow-up, femoral medial cortical thickness increased while frequently lateral cortical thickness decreased over time after an extensively porous -coated stem in revision hip surgery.

Introduction: Papers about high-virulence infections are not usual, results contradictory, and orthopaedic outcomes not described.

Purpose: to compare infectious and orthopaedic results after late arthroplasty infections by single vs. polymicrobial isolates, low vs. high-virulence, and Gram-positive vs. Gram-negative organisms, when treated by exchange surgery plus long cycles of combined oral antibiotics.

Patients and Methods: A late arthroplasty infection was diagnosed in 68 consecutive patients (48 female) of 72.2(+/−10.2) years (37 hips/31 knees).

Cultures were polymicrobial in 22 cases and by Gram-positive in 55 (80.9%). Highly-resistant organisms: methicillin-resistant Staphylococcus (36 patients) and ESBL-producing Enterobacteriaceae (2 patients). “Problematic-treatment”: Enterococcus (6 patients), Pseudomonas (3 patients), non-fermenting Gram-negative (2), moulds (1).

Oral antibiotic selection: according to bacterial sensitivity, biofilm and intracellular effectiveness. Protocolized surgery: two-stage exchange. Average follow-up: 4.7+/−2.7 years (1–11).

Healing of infection is diagnosed if absence of clinical, serological and radiological signs of infection during the whole follow-up. Orthopaedic outcome is evaluated by HHS for hips and by KSCRS for knees.

Results: Surgery was not possible in 7 infections (rejected by patients), and reimplantation in 17 additional cases (patients died shortly after first surgery, rejected 2nd surgery, or was contraindicated because of medical reasons).

Healing of infection: 59/68 patients (86.8%), 32/37 hips (86.5%) and 27/31 knees (87.1%). Infection not healed: 7/68 cases (10.3%) (4/37 hips, 3/31 knees) (5 by highly-resistant and 1 by “problematic-treatment” bacteria). There are no differences between hips and knees (p=0.55).

Orthopaedic Results: HHS averages 80.5+/−16.2 (81+/−16 in healed infection, 56+/−23.5 in persistent infection). KSCRS averages 77.2/58.1 +/− 19.8/24.5 in healed infections, 32.6/0+/−25.8/0 in persistent infections. Infective and orthopaedic results present a strong statistical correlation in hips (p=0.016) and knees (p=0.0001).

Statistically significant differences are not found when comparing subgroups according to Gram stain (p=0.43), multiple vs single bacteria (p=0.47 infective, p=0.71 orthopaedic), highly-resistant bacteria (p=0.2 infective, p=0.1/0.5 orthopaedic), or “problematic-treatment” (p=0.68).

Conclusions:

A strong statistical correlation appears between infective and orthopedic results after late arthroplasty infections.

Introduction and Objectives: We compared the clinical and radiographic results of patients with JRA and primary arthritis using a non-cemented THR with an alumina-alumina THA.

Materials and Methods: We studied 29 THR (Cerafit cup and Multicone stem) implanted in 19 patients with JRA in group 1 and 135 with primary arthritis in group 2. Mean follow-up was 59.0 months. It was seen that 13 hips in group 1 had moderate-severe acetabular protrusion and allograft was used in 12 hips. The center of rotation was determined pre and postoperatively in group 1 according to Ranawat.

Results: In group 1 age (p< 0.001), weight (p< 0.001), and level of activity (p< 0.001) were less. Type A acetabulum (p=0.014) and a cylindrical femur (p< 0.01), according to Dorr, were more frequent in group 1. There was no noise or alumina breakage. There were two intraoperative femur fractures in group 1. There was a revision of 1 cup in group 1 and infection of 1 stem in group 2. In most of the group 1 cases anatomical position was recovered (p< 0.001). The preoperative center of rotation of the hip with acetabular protrusion was 23.2 mm and in the postoperative X-ray 5.6 mm.

Discussion and Conclusions: In spite of the differences, THR with alumina-alumina allows similar results to be obtained in the medium term in patients with JRA. The use of an allograft in those patients with severe acetabular protrusion makes it possible to reconstruct the center of rotation of the hip.

Introduction and Objectives: We compared the clinical and radiological results in patients under and over 40 years of age who had received a non-cemented alumina-alumina hip replacement.

Materials and Methods: We studied 337 Cerafit acetabular cups implanted in 4 hospitals in association with Multicone-Hydroxyapatite stems with alumina-alumina bearing surfaces. Group 1 consisted of 63 patients under 40 years of age and group 2 of 274 patients over 40 years of age. Mean follow-up was 59.0 months. Demographic data and clinical and radiological results of both groups were compared.

Results: There were no cases of primary arthritis in group 1, however severe hip dysplasia and juvenile rheumatoid arthritis were frequent (p< 0.001). Weight (p< 0.001) and degree of activity (p=0.003) were greater in group 2. Preoperative function (p=0.03) and mobility (p< 0.001) were worse in group 1. There were 3 cup revisions in group 1 and 4 (including an alumina breakage) in group 2. Survival with no revision due to any cause was 91.4+5.1% in group 1 and 97.0+ 1.1 in group 2 (p=0.4007). There were no noises. Clinical and radiological results were similar in both groups.

Discussion and Conclusions: Diagnoses were different in both groups, the younger patients were in worse conditions. In spite of these differences, the alumina-alumina prosthesis showed similar results in both groups in the medium term. Long-term follow-ups are necessary to confirm these results.

Introduction and purpose: Highly cross-linked polyethylenes (HXLPE) sterilized in an air-free environment have been used to prevent osteolysis and loosening of implants. This prospective randomized study analyzes the results of a series in which one single type of prosthesis but made with one of two different kinds of polyethylene (PE) has been used.

Materials and methods: We assessed 45 Allofit cups with a Sulene-PE liner (sterilized in nitrogen) and 45 with Durasul-PE liner (highly cross-linked) associated with an Alloclassic stem (femoral head: 28 mm) with a minimum follow-up of 5 years (mean 66.3 months). Femoral head penetration was analyzed by means of a digital program at 6 weeks, and at 6 and 12 months and once a year, using the Dorr method given the non-spherical shape of the cups.

Results: All assessed hips had good outcomes determined clinically and by x-rays. There was no loosening of any component. There were no radiolucent lines or osteolysis. Femoral head penetration at 6 weeks was 47.4% less in the Durasul group (0.19+0.06 mm for the Sulene-PE and 0.09+0.03 for the Durasul-PE [p< 0.0001]). Mean annual penetration was 20% less in the Durasul group (0.04+0.02 and 0.008+0.008 [p< 0.0001] respectively. The differences increased by the third year. Mean penetration at 5 years was 39.1% less in the Durasul group (p< 0.0001).

Conclusions: There was significant femoral reduction in the Durasul-PE group. Long term results are necessary to confirm that these prostheses lead to a lower rate of osteolysis.

Introduction and purpose: Different bearing surfaces have been used to prevent osteolysis, such as alumina-alumina. We present here an analysis of the results of a prospective multi-center study of complications related to the use of alumina-alumina bearings.

Materials and methods: In 4 hospitals 319 cups with hydroxyapatite stems and alumina-alumina bearing surfaces were implanted with a mean follow-up of 5.6 years (range: 3–8). The mean age of the patients was 52.7 (range: 14–70). Alumina wear was calculated by means of a special program.

Results: Revision was performed of 5 cups and 2 stems. In one hip with a horizontal acetabular angle (35°) and a thin alumina liner (size 50/32), an acetabular liner fracture occurred 36 months after surgery. The probability of not undergoing revision due to any cause was 96.9% (CI 95%:94.7–99.1%). None of the patients reported any type of noise. All the non-revised cases showed good results both on clinical and X-ray exam at the end of the follow-up. The difference between the center of the head of the femur and the center of the head of the cup at 6 weeks after surgery was −2.45+0.53 mm, with no further changes seen during the follow-up.

Conclusions: These data suggest that the prosthetic alumina-alumina bearing surface has excellent results over 5 years and that alumina fractures are infrequent. No changes were seen in terms of the penetration of the femoral head in any case. Longer follow-ups are necessary to determine if the reduction of wear translates into less osteolysis and loosening.

Introdution. Gamma sterilisation in air produces free radicals in the polyethylene (PE) with the result of degrading its mechanical properties, increasing wear and debris, and producing osteolysis and loosening. PE sterilized in the absence of air and high cross-linked polyethylene (HXLPE) have been used to avoid osteolysis and loosening. This prospective randomized study has assessed results in a series using two different poly-ethylenes associated with the same prosthetic design.

Methods: We assessed 45 Allofit cups with Sulene-PE liner (sterilized with nitrogen) and 45 Allofit cups with Durasul-PE liner (HXLPE), both associated with an Alloclassic stem (28-mm femoral head) (Zimmer). The minimum follow-up is 5 years and the mean follow-up 66.3 months. The linear femoral head penetration was estimated at 6 weeks, at 6 and 12 months and annually thereafter, using a software package employing the Dorr method, given the nonspherical cup shape.

Results All assessed hips had good clinical and radiographic results. There was no loosening of any prosthetic component. There were no radiolucent lines or osteolysis. Femoral head penetration in the early postoperative radiographs was 47.4% less in the Durasul group (0.09+0.03 mm) than the Selene-PE group (0.19+0.06 mm)(p< 0.0001). The mean yearly linear femoral head penetration was 20% lower in the Durasul group (0.008+0.008) than the Sulene-PE group (0.04+0.02)(p< 0.0001). Differences increase after the third year. Mean linear femoral head penetration at 5 years was 39.1% less in the Durasul group (p< 0.0001).

Conclusions: Although the digitized method used is not totally accurate and is used only for a general estimate, there is a significant reduction in yearly linear femoral head penetration with Durasul-PE. Longer-term results are needed to confirm that this polyethylene generates less osteolysis.

Introduction: There are protocols on the management of polytrauma in obstetric patients. However, there is little information about osteo-articular injuries sustained in these patients. The object of this study is to review the management of these patients and to suggest a guideline.

Material and method: Inclusion criteria: Pregnant patients treated during the last 6 years, treated as inpatients in our center during pregnancy due to osteo-articular injuries.

Variables studied: Gestational age, mechanism of injury, fracture type, management, termination of pregnancy and sequelae.

Results: We treated 13 patients with 21 fractures in our center, with an incidenc of 2,13 fractures/10.000 births. The mechanism of injury was low degree trauma in 6 cases (60% 3rd trimester) and high-degree in 7 (83% 1st and 2nd trimester). There was a predominance of lower extremity fractures, especially tibia and fibula (7 cases) and pelvis (3 cases).

Gestational age was 1st trimester (3 cases), 2nd trimester (5 cases), 3rd trimester (5 cases). 10 women were treated surgically, 8 before finishing gestation. Gestation ended as and induced abortion (3 cases, 1 due to fetal death and 2 due to teratogenic risk), and birth (10 cases, all alive, 50% eutocic). Only 3 babies needed type II or type III neonatal reanimation.

CONCLUSIONS: Pregnant women can get injured by low-energy trauma, especially during the third trimester. Pregnancy does not necessarily compromise surgical management of fractures. We review diagnostic and therapeutic management strategies for these patients.

Introduction. Alternative bearing surfaces to polyethylene have been introduced to avoid the appearance of osteolysis in THR. The aim of this study has been to perform prospective analysis of the data from a multi-center clinical trial for assessing the incidence of early alumina-specific-complications.

Material and Methods. We analysed 310 Cerafit cups associated with a Multicone-HA stem using alumina-on-alumina bearings implanted in four institutions from 1999 to 2003, with a mean follow-up of 4.7 years. Patients’ mean age was 52.8+13.4 years. Linear femoral head penetration was analysed using a software package.

Results. There were 4 revisions: 2 revisions due to dislocations resulting poor surgical technique (1 cup and 1 stem) and 2 revisions after a trauma (1cup and 1 stem). There was 1 alumina liner fracture 36 months after implant in a hip with a horizontal acetabular angle (35°) and a thin alumina liner (size 50/32). The other cases showed good clinical and radiographic results at the end of follow-up. The radiographic difference between the femoral head and cup centres at 6 weeks postsurgery was 2.48+0.60 mm, without changes in the course of the follow-up. The mean linear femoral head penetration was unreliable (0.00186+0.0032 mm/year) because it was below the mean error for the measurement system.

Conclusions. These data demonstrate that Cerafit Alumina-on-Alumina prostheses show excellent results after 5 years. Liner fractures are uncommon. Despite the blurred alumina images, the digitized method, although not totally accurate and used only for a general estimate, allows us to measure the approximate distance between the centre of the cup and the centre of the femoral head. Changes in linear femoral head penetration were not seen in any hip. Continued follow-up should determine if reduction in wear among the alumina-on alumina bearings results in less osteolysis.

Aim: We assessed prospectively clinical and radiographic results of two different polyethylenes (PE) associated with the same prosthetic design (Zimmer-Centerpulse).

Material and Methods: We assessed 56 Allofit cups with Sulene-PE liner (sterilized in nitrogen) and 45 with Durasul-PE liner (highly cross-linked) associated with an Alloclassic stem (28-mm femoral head) implanted between 1999–2002. The mean follow-up was 29.4 months for the Sulene-PE and 25.3 for Durasul-PE. The radiologic study according to Johnston et al. and the PE wear estimated according to a software package (AutoCAD R14), were analysed at 6 weeks (zero position), at 6 and 12 months and annually thereafter.

Results: There were 3 dislocations which were excluded from the follow-up study. There were no infections. All assessed hips had good clinical and radiographic results. There was no loosening of any prosthetic component. There were no radiolucent lines, osteolysis, cortical hypertrophy, or femoral osteopenia. The distances between the acetabular shell and the femoral head centres taken in the early postoperative radiographs (zero position or bedding-in) were 0.30+0.094 mm for the Sulene-PE group and 0.20+0.074 for the Durasul-PE (p=0.029). The mean wear related with the zero position was 0.1035+0.0686 and 0.0819+0.078 (p=0.108) respectively.

Conclusions: Despite the measurement error of PE wear being higher in the Allofit cup, a higher zero position (bedding-in) was found in the Sulene-PE group than in the Durasul-PE. Although the mean wear was higher in the Sulene-PE than in the Durasul-PE, with the number of hips available, differences were not significant after 3 years

Introduction. Plain radiograph underestimates the lysis extent while bone defect determines acetabular revision. We determine the multislice computed tomography (CT) efficacy with metal-artifact minimization to calculate the volume, extent and location of lytic lesions around a loose acetabular cup.

Patients and Methods. 48 hips with a loose acetabular cup were evaluated before cup revision. Multislice CT scans with metal-artifact minimization (Toshiba-MEC CT) were done. Scans were taken at 135 kV and 250 mA to maximize the resolution and bone contrast. CT slice thickness was 3 mm and reconstruction index 1.5 mm. Evidence of osteolytic lesion on these scans was compared with plain radiographs and with intraoperative findings. Bone defects were classified according to Paprosky.

Results. Acetabular lysis were found in the radiographs of 18 hips and in the CT scans of 36 hips. The most frequent locations of osteolysis were medial (32 hips) and posterior walls (23 hips). Radiographs underestimated the extent of the lysis: there were 28 hips with radiographic type 1 defects and 16 hips with CT defects; 6 and 11 with type 2; 8 and 10 with type 3A; and 6 and 11 with type 3B respectively (Wilcoxon test, p< 0.001). The mean volumetric bone loss was 35.4 cm3 . Intraoperative findings confirmed CT findings.

Conclusions. Multislice CT scans with metal-artifact minimization is more sensitive for identifying and quantifying osteolysis around the cup than are plain radiographs. Since CT scans allow us to show the extent and location of the osteolysis, they are useful to plan cup revision.

Aim: To assess the clinical results, radiographic fixation and polyehtylene wear of a second generation cementless porous coated acetabular cup for a follow-up of 9.6 years

Material and Methods: 81 Duraloc 500 (De Puy) cups with polyethylene (PE) Enduron implanted between 1992–1995 are analysed. The mean follow-up was 9.6 years. Clinical results and radiographic fixation according to Jonhston et al. and according to Engh et al. were evaluated. PE mean wear and so-called “bedding in” process was estimated with anteroposterior pelvic radiographs which were digitized and analysed using a software package with Sychterz method. X-rays were measured at 6 weeks (zero position), 6 months, 12 months and annually thereafter. In all cases a Profile (De Puy) femoral stem was used

Results: There was 1 PE exchange because of a later dislocation (Kaplan-Meier survivorship 98.67 % at 10 years). All cups were osseointegrated. There was no osteolysis (Kaplan-Meier 100% at 10 years). There were no PE liner ruptures. Zero position (PE wear at 6 weeks) for PE was 0.1651 + 1339 mm and mean wear was 0.1108 + 0.793 mm.

Conclusions: All cups, except one, improved clinical results and showed stable fixation. There was no acetab-ular osteolysis in this series. In spite of a low zero position, mean PE wear was similar to other cups.

Purpose: To analyse prolonged combinations of oral intracellular-effective antibiotics plus two-stage exchange surgery for treatment of chronic THA and TKA infections.

Materials and Methods: Definition of infected case: more than 3 months from surgery; multiple positive intraoperative cultures and/or active fistulae.

33 patients were treated from 1996 to 2002: 8 THA, 5 hip hemiarthroplasties, 20 TKA.

Bacteriology: 24 Staphylococci of which 16 were methycillin-resistant, 7 multi-resistant Gram-negative, 2 Cory-nebacteriae; 7 polymicrobian.

Antibiotic therapy: two simultaneous oral antibiotics, selected according to bacterial sensitivity and intracel-lular effectiveness (rifampin, ofloxacin, ciprofloxacin, levofloxacin, trimethoprim-sulfamethoxazole, fosfomicin, linezolid, doxiciclin), were used on an outpatient basis (between 1st and 2nd surgery, and after 2nd surgery until serological normalization). Patients received intravenous antibiotics and were in-hospital only for one week after surgery.

Surgery: two-stage exchange with 2nd stage delayed until clinical and serological normalization.

Healing of infection: absence of clinical, serological and radiological evidence of infection along all follow-up.

Prospective follow-up: 24-96 months.

Results: Healing of infection: 32/33 patients (97%).

Treatment failure: 1 patient (TKA) (3%).

THA: 8/8 infections healed: 1 Girdlestone patient (1st stage of exchange) rejected reimplantation; 7 two-stage exchange (good/excellent objective and subjective result).

Hip hemiarthroplasty: 5/5 infections healed: 3 Girdlestone (1st stage of exchange surgery, 2nd stage rejected because of hemiplegia or Alzheimer); 2 two-stage exchange (good/excellent objective and subjective result).

TKA: 19/20 infections healed: 3 resection-arthroplasty (1st stage of exchange surgery, 2nd stage rejected because of Buerger, cirrhosis or Alzheimer); 17 two-stage exchange (15 good/excellent objective and subjective results, 1 patient needed a debridement 2 months after 2nd surgery because of prolonged aseptic drainage and healed uneventfully, 1 failure described).

Conclusions: Prolonged combinations of oral intracellular-effective antibiotics associated with two-stages exchange surgery is a promising alternative for treating deep chronic THA and TKA infections. Longer follow-up and larger series are necessary.

Introduction and purpose: This is a prospective analysis of the clinical and radiographical results of two different types of PE, both associated to the same kind of prosthesis (Zimmer-Centerpulse).

Materials and methods: A total of 101 Allofit shells were analyzed; 56 had Sulene-PE (nitrogen sterilized) and 45 had Durasul highly cross-linked PE, associated to an Alloclassic stem (femoral head: 28 mm). They were all implanted between 1999 and 2002. Mean follow-up was 29.4 months for Sulene-PE and 25.3 for Durasul-PE. PE wear was assessed by means of image digitalization with special software (AutoCAD 14R) after six weeks (initial settling or position zero), after 6 and 12 months and on a yearly basis.

Results: Three cases dislocated and were thus excluded from the study. There were no infections. All cases assessed had good clinical and radiological results. There were no instances of implant loosening. There were no radiolucent lines, osteolysis, cortical hyperthrophy or proximal osteopenia. On the initial radiograph (position zero), the distance between the axes of the femoral head and those of the shell was 0.30+0.094 mm for the Sulene-PE group and 0.20+0.074 for the Durasul-PE one (p=0.029). Mean wear, taking position zero as a reference point, was 0.1035+0.0686 and 0.0819+0.078 (p=0.108) respectively.

Conclusions: In spite of the higher error rates found in the wear measurements of the Allofit cup, a greater position zero was found in Sulene-PE than in Durasul-PE. Although mean wear was higher in Sulene-PE than in Duarsul-PE, the differences found were not significant 3 years postop.

Introduction and purpose: The study analyzes the efficiency of multislice computerized tomography with metal artifact reduction to calculate the volume, extent and location of osteolysis around a loosened acetabular shell.

Materials and methods: An assessment was made of 48 hips with a loose shell before they were revised with multislice-CT with metal artifact reduction (Toshiba-MEC CT). The slices were taken at 135 kV and 250 mA in order to maximize resolution and bone contrast. Slice width was 3 mm and the reconstruction index 1.5 mm. The osteolytic lesions found on the CT were compared with simple radiographs. Bone defects were classified using Paprosky’s classification.

Results: Acetabular osteolysis was found in the radiographs of 30 hips and in the CTs of 36. Radiographs under-represented the extent of osteolysis: there were 28 hips with a type 1 radiographic defect and 18 with a type 1 CT defect; 6 and 14 with type 2; 8 and 6 with type 3A; and 6 and 10 with type 3B respectively (Wilcoxon test, p=0.004). The mean volumetric loss of bone defects was 35.4 cm3 . Intraoperative findings confirmed the CT findings.

Conclusions: Multislice CT with metal artifact reduction is more sensitive than simple radiographs when it comes to identifying and quantifying osteolysis around an ace-tabular shell. Since multislice-CT shows us the extent and location of osteolysis, it is of great help at the time of planning a revision of the acetabular shell.

Aims: internal fixation is not generally accepted as election treatment for displaced femoral neck fractures in patients older than 70. Results and risk factors are analysed in this later group of patients. Patients and Methods: 155 patients older than 70 with displaced femoral neck fractures were treated with closed reduction and parallel cannulated screws and prospectively followed for 2 years. Patients were allowed postoperative full weight bearing with aids. Quality of reduction and osteosynthesis were radiologically analysed. Results: 24 patients (15%) were lost. At the end of follow-up 52% of patients were asymptomatic, 13% had mild pain, 28% suffered a 2nd surgery (arthroplasty) and 7% were badly ill for aditional surgery. 57% presented uncomplicated consolidation, 28% non-union and 8% ischemic necrosis. Poor-quality reduction (p= 0.039) and poor-quality osteosynthesis (p=0.051) were significant risk factors for failure. A higher age (p=0.36), displacement (Eliason criteria) (p=0.26) and delay in surgery (p=0.53) were not significant risk factors. Conclusions: closed reduction and percutaneous fixation of displaced femoral neck fractures achieves good/fair results in only 65% of patients older than 70 years. Poor-quality reduction and osteosynthesis are risk factors for clinical and/or radiological failure.

Aim: Mean radiographic polyethylene wear can not distinghish between so-called Òbedding-inÒ and true wear in porous-coated cups (Sychterz 1999). Wear performance of two different generations of the same cement-less porous-coated cup are compared. Material and Methods: 83 Harris-Galante I (HGI) (32mm femoral head) and 93 Harris-Galante II (HGII) (28mm) cups are analyzed. The average follow-up was 11.5 yrs for HGPI and 6.7 years for HGPII cups. Anteroposterior pelvic radiographs (at 3 and 6 months and annually thereafter) were scanned digitally and linear wear was estimated using a software package with the Sychterz method. All radiographs were made following the same protocol. Results. Postoperative bedding-in was: 0.15±0.04 mm for HGI and 0.11±0.02 for HGII cups (p< 0.001). Femoral head penetration at the end of follow-up was: 1.50±0.28 mm for HGI and 0.85±0.01 for HGII. Mean wear excluding bedding-in was: 0.13±0.23 mm/year for HGI and 0.11±0.09 for HGII (p=0.740). The femoral head penetration rate was highest in the þrst two years and then decreased with the time and was similar in both groups. Conclusions: The digitized Sychterzñ method allows us to determine bedding-in and true polyethylene wear. The second generation cups show a decrease in the bedding-in process, but do not have a lower wear rate.

Aim: To assess the long-term results of a series of porous-coated anatomic cementless total hip prostheses. Material and Methods: A total of 91 PCA (How-medica) total hip arthroplasties performed between 1984–1988 were analyzed with a mean follow-up of 13.5 years. Clinical results were assessed according to Merle DñAubignŽ-Postel score. Radiographic þxation was assessed according to Engh et al. Results:Thigh pain (17 hips) was correlated with unstable þxation (p=0.0096). Thirty-one cups and six stems were revised. Radiographic loosening ocurred in 21 cups and 12 stems. Mean polyethylene wear was 0.16 mm/year. Cup loosening was related with an acetabular wear equal to or more than 2 mm (p=0.0018) and an small cup size (p=0.015). Stem loosening was related with poor femoral canal þlling (p=0.046). Fifty (54.9%) hips had femoral osteolysis and were related with polyethylene wear of more than 2 mm (p=0.0015) and with hips with poor femoral þlling (p=0.0285) and unstable þxation (p=0.00005). Conclusions:The PCA cup has had worse results than the stem. Cup loosening is related with the acetabular wear and cup size. The frequent proximal femoral osteolysis is associated with unstable þxation and poor femoral þlling