In this study, we describe a morphological classification for greater tuberosity fractures of the proximal humerus. We divided these fractures into three types: avulsion, split and depression. We retrospectively reviewed all shoulder radiographs showing isolated greater tuberosity fractures in a Level I trauma centre between July 2007 and July 2012. We identified 199 cases where records and radiographs were reviewed and included 79 men and 120 women with a mean age of 58 years (23 to 96). The morphological classification was applied to the first 139 cases by three reviewers on two occasions using the Kappa statistic and compared with the AO and Neer classifications. The inter- and intra-observer reliability of the morphological classification was 0.73 to 0.77 and 0.69 to 0.86, respectively. This was superior to the Neer (0.31 to 0.35/0.54 to 0.63) and AO (0.30 to 0.32/0.59 to 0.65) classifications. The distribution of avulsion, split and depression type fractures was 39%, 41%, and 20%, respectively. This classification of greater tuberosity fractures is more reliable than the Neer or AO classifications. These distinct fracture morphologies are likely to have implications in terms of pathophysiology and surgical technique.

Cite this article: Bone Joint J 2014;96-B:646–51.

Early total hip replacement (THR) for acetabular fractures offers accelerated rehabilitation, but a high risk of heterotopic ossification (HO) has been reported. The purpose of this study was to evaluate the incidence of HO, its associated risk factors and functional impact. A total of 40 patients with acetabular fractures treated with a THR weres retrospectively reviewed. The incidence and severity of HO were evaluated using the modified Brooker classification, and the functional outcome assessed. The overall incidence of HO was 38% (n = 15), with nine severe grade III cases. Patients who underwent surgery early after injury had a fourfold increased chance of developing HO. The mean blood loss and operating time were more than twice that of those whose surgery was delayed (p = 0.002 and p < 0.001, respectively). In those undergoing early THR, the incidence of grade III HO was eight times higher than in those in whom THR was delayed (p = 0.01). Only three of the seven patients with severe HO showed good or excellent Harris hip scores compared with eight of nine with class 0, I or II HO (p = 0.049). Associated musculoskeletal injuries, high-energy trauma and head injuries were associated with the development of grade III HO.

The incidence of HO was significantly higher in patients with a displaced acetabular fracture undergoing THR early compared with those undergoing THR later and this had an adverse effect on the functional outcome.

Cite this article: Bone Joint J 2013;95-B:95–100.

Purpose

The measurement of radial head translation about the capitellum (in percent): the radio-capitellum ratio (RCR) has proven to have excellent inter- and intra-observer reliabilities when measuring the RCR on a lateral radiological view of elbows at 90° of flexion and in the neutral position of the forearm. However, in the clinical setting, radiographs may be taken with the elbow in different positions. However, the purpose was to validate the RCR measurement method on elbows in different positions in flexion-extension and in different positions of the forearm in pronation-supination.

Purpose

Radial head implant over-lengthening, a common cause of capitellar wear and clinical failure, is difficult to diagnose using radiographs of the injured elbow. The purpose of this study was to determine if a novel measurement technique based on contralateral elbow radiographs, termed the RACER method, could be used to accurately estimate the magnitude of radial head implant over-lengthening. Part I of this study examined the side-to-side consistency of radiographic landmarks used in the measurement technique. Part II of this study validated the technique using simulated radial head implant over-lengthening in a cadaveric model.

Purpose

The ideal timing for a Total Hip Arthroplasty (THA) remains a highly controversial topic in the treatment of displaced acetabular fractures in the elderly with damage to the articular surface of the acetabulum or femoral head. Acute THA offers early rehabilitation but a high incidence of heterotopic ossification has been reported. Its incidence and consequences on the patient's function are not clear.

The goal of this study is to compare the incidence of heterotopic ossification following acute THA of acetabular fractures compared to delayed THA, and to evaluate its functional effects on the patient.

Purpose: The literature contains little information on an objective method of measuring radiocapitellar joint translations, as would be seen with joint instability. The purpose of this study was to develop and validate a measurement method that was simple and that could be easily reproducible in a clinical setting or intra-operatively to assess radiocapitellar joint translations.

Method: We performed a radiological study on a synthetic elbow specimen in order to quantify radial head translations as related to the capitellum: the Radio-capitellum ratio (RCR). Thirty (30) lateral elbow x-rays were taken in different magnitude of subluxation of the radial head. The subluxation was created randomly by manipulation. X-rays where taken by fluoroscopy to obtain a perfect lateral view of the distal humerus. First, the evaluators determined the long axis of the radius and the center of the capitellum. The displacement of the radial head (in mm) was obtained by measuring the distance of the line perpendicular to the long axis of the radius passing through the center of the capitellum. Then, in order to adjust for variation of magnification, a ratio of the displacement of the radial head about the diameter of the capitellum was done. The RC ratio would be of zero because the long axis of the radius always crosses the center of the capitellum in a perfectly aligned joint. A five mm translation of the radial head and a capitellum diameter of twenty (20) mm would give a RCR of 25% and would be positive if anterior and negative if posterior. The measurements were done two times at one week intervals by three independent evaluators to test inter-observer agreement and intra-observer consistency. The radiological incidences were randomly ordered to minimize observer recall bias. Intra/inter-observer reliability was calculated using Intra-Class Correlation (ICC) and paired T-tests.

Results: The mean translation in the trial group was of 6,06% (SD 70.7%) from – 167% to 125%. A result over 100% means that it is a complete dislocation ie – the axis of the radius is outside of the capitellum. Negative values signify posterior translation and positive values an anterior translation. Intra-observer reliability was excellent for the Radio-capitellum ratio (ICC 0.988 and 0.995) and inter-observer reliability was excellent (ICC 0.984 in average). Paired T-test results confirm a high intra-observer repeatability (p=0.97 and p=0.99) as well as a large inter-observer reproducibility (p=0.98 in average).

Conclusion: The proposed measurement of radial head translation about the capitellum (in percent): radio-capitellum ratio (RCR) has excellent inter – and intra-observer reliability when using our measurement method.

Purpose: Anatomic repair of an acute distal biceps tear has been demonstrated to improve flexion and supination strength compared with conservative treatment. The most commonly used fixation methods for a distal biceps tendon repair include suture anchors, bioabsorbable screws, and endobutton. The goal of this study was to

perform a radiologic evaluation of bioabsorbable screw tunnel osteolysis and

Method: We included twenty (20) consecutive patients who underwent primary anatomic repair of the distal biceps tendon since 2005. We used a 7x23mm biote-nodesis^® screw (Arthrex) in 18 cases, and 8x23mm and 8x12mm screws in the other two cases. First, from the x-ray view done in the immediate postoperative period showing the complete screw tunnel, we measured the ratio of the volume of the bone tunnel to the volume of the radius bone section. A mathematical formula for cylindrical volume was used (¶ x r2 x h). We used a relation between two volumes rather than the tunnel volume itself for scaling purposes. Secondly, we calculated the same relation on the x-ray from the last follow-up. We then obtained the percentage of tunnel enlargement by relating the volumetric ratio from the first x-ray to the ratio from the last x-ray. Afterwards, we performed a retrospective chart review noting any bioabsorbable screw-related and postoperative complications.

Results: In the group, the average age was forty-six (46) years. All subjects were male. Eighteen (18) cases were acute complete ruptures operated in the first three weeks, one case was a partial rupture and one case was chronic (one year). The average follow up was eighteen (18) months. We found that the average initial relative volume occupied by the screw tunnel was 47 % of the bone section. At the last follow-up, this volume increased to 68%. After our chart review, we found that one patient presented with a broken screw and increased pain and that another patient developed a severe foreign-body reaction with re-rupture of the tendon requiring three reoperations.

Conclusion: The use of a bioabsorbable screw for distal biceps tendon fixation results in significant osteolysis of the radial bone at short term follow-up. Consequences of osteolysis in the radius are worrisome since iatro-genic fractures are more likely to occur. Osteolysis can be secondary to an inflammatory reaction to the screw material, bone necrosis secondary to pressure or initial thermal necrosis. We also noted two cases of severe bio-tenodesis screw-related complications among our series of twenty (20) patients. These results call into question the use of the bioabsorbable screw in distal biceps tendon repair and are important to present. Exact volume of bone loss using 3D computed tomography scan analysis as well as quality of life questionnaires and strength testing will be available for presentation.

Purpose: Recognition of the glenoid version is important for evaluation of different pathologies. There is no consensus on method to use to evaluate version. The purpose of this study was to compare different measurement strategies in one hundred-sixteen (116) patients with shoulder CT-scans.

Method: Scapula CT-scan axial images were revised and the cut below the base of the coracoid was selected. The glenoid version was measured according to the Friedman method (FM) and the “scapula body” methods (BM). In case of B2 glenoid three different reference lines have been measure: the neo-glenoid NG (posterior erosion surface), paleo-glenoid PG (original glenoid surface) and the intermediate-glenoid IG (line from anterior and posterior edge). Three orthopaedic surgeons independently examined the images two times and intra/inter-observer reliability was calculated using Intra-Class Correlation (ICC). The objective of this paper is to define which method shows best reliability.

Results: Group 1 (B2 excluded n=53): The average glenoid version was significantly different between two measurement techniques for all three observers, with an average of – 7.29° for BM technique and – 10.43° for FM. Intra-observer reliability was excellent for both methods (ICC: 0.958–0.979 for FM; 0.940–0.970 for BM). Inter-observer reliability was excellent for both methods (FM: ICC= 0.977; BM: ICC= 0.962). The light superiority of the first method was not significant. For group 2 – B2 glenoid (n=63): six different measures of version were taken resulting by two scapula reference line (FM and BM) and three glenoid reference line (PG, IG, NG). The average glenoid versions were significantly different (p0.82). The inter-observer reliability were also very-good or excellent for all methods (ICC > 0.79). The most reliable method for measurement of B2 glenoid version was the association of the Friedman line for the scapula axis and the intermediate glenoid line with excellent intra observer reliability (ICC > 0.957) and inter-observer reliability (ICC=0.954).

Conclusion: Measurement of glenoid version on axial cut of a Ct-scan is highly reliable. Significant differences exist between measures depending which method is used, underlying the importance of a consensus for research and clinical purpose. Despite very good performance of all methods, authors recommend the use of the Friedman method for the scapula axis reference and an intermediate glenoid line in case of B2 glenoid.