Background. Osteoarthritis (OA) pain treatment has limitations in terms of serious adverse effects and low efficacy. We aimed to evaluate efficacy and safety of naproxen sodium/codeine phosphate combination in these patients. Methods. In this prospective, randomised, double blind, placebo controlled clinical trial, 135 patients with osteoarthritis, who were 40–65 years; applied to our institution's orthopaedics outpatient clinic; had grade 1, 2, or 3 primary osteoarthritis diagnosed in last 1 year; and had Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score≥40, and Visual Analogue Scale score≥40, were enrolled. Subjects were randomised (1:1) to placebo (n= 67) or combination (n= 68) arms, in which 550 mg naproxen sodium/30mg codeine phosphate was given orally twice a day for 7 days. Rescue medicine was 500 mg paracetamol (max= 6 tablets/day). Demographic characteristics, medical history, adverse events, VAS and WOMAC scores were collected in study visits performed within 10 days. The study was approved by local institutional ethics committee and written informed consents were obtained from all participants. Results. Patients were evenly matched in both arms. The mean age was 52.3±6.6 years (89.7% female). WOMAC and VAS scores decreased significantly within each group (p<0.001 for all). For the study group (n=43) the mean (+ SD) and median (min-max) VAS Score was −29.8 (+21.0) and −30 (−70−0), respectively. In contrast, for the control group (n=36) the mean and median (min-max) VAS Score was −16.1 (+24.4) and −12.5 (−65−40), respectively. WOMAC score was decreased more in combination group (p= 0.044). Changes in VAS scores between visits were significantly different (more in combination receivers) between groups (p= 0.018). Ratio of patients requiring no rescue medicine was higher among combination receivers than controls (64.8% vs. 35.2%, respectively). Most common adverse events were constipation, dyspepsia, and somnolence; no fatality was encountered. Conclusions. Naproxen sodium/codeine phosphate combination is effective and safe in osteoarthritis patients. Level of Evidence. Level 1

Hyaluronic acid (HA) is responsible for the viscoelastic properties of synovial fluid and cartilage. Compared to healthy joints, synovial fluid in osteoarthritic joints contains HA of lower concentration and molecular weight. Hyaluronic acid hybrid complexes are composed by long and short HA chains linked by H bonds. These rheological characteristics and viscoelastic properties were produced by thermal patented process without chemical modification. Chondroitin sulfate (CS) is one of the essential components of the articular cartilage matrix and plays a key role in cartilage's mechanical and elastic properties. Biotechnological chondroitin (CB) is produced through fermentative/biotechnological processes and, unlike CS, is not sulfated. It has been shown that CB to play a more significant role in the phenotypic maintenance of chondrocytes than chondroitin sulfate and increases their viability and proliferation. A recent A Single-Arm, Open-Label, Pilot Study was conducted to evaluate the safety and efficacy of a single-dose intra-articular injection of Hybrid Hyaluronic acid and Sodium Chondroitin in the Treatment of Symptomatic Hip Osteoarthritis. A single injection of HS-SC was well tolerated and safe in the treatment of symptomatic hip OA. The treatment demonstrated a rapid significant improvement in pain (VAS) and function (Lequesne's Index) up to 6 months of follow-up

Introduction and Objective. Hyaluronic acid (HA) is an effective option for the treatment of osteoarthritis (OA) patients due to several properties such as normalization of the mechanical and rheological properties of the synovial fluid and amelioration of OA symptoms and joints function by promoting cartilage nutrition. Since OA progression is also significantly related to oxidative stress and reactive oxygen species (ROS), sodium succinate (SS) is envisioned as a promising compound for cartilage treatment by providing antioxidant defense able to normalize intracellular metabolism and tissue respiration via mitochondrial mechanism of action. The scope of this study was to investigate on an in vitro inflammatory model the efficacy of Diart. ®. product, a combination of HA and SS. Materials and Methods. Donor-matched chondrocytes and synoviocytes were obtained from KL 3–4 OA patients undergoing total knee replacement. At passage 4, inflammation was promoted with 1 ng/ml IL-1B for 48 hours in absence and presence of Diart. ®. at 1:3 dilution rate. Nitric oxide (NO) from cell culture supernatant was measured by Griess reaction. Mitochondrial and cytoplasmatic ROS evaluation was assessed by flow cytometry with MitoSox and dichlorodihydrofluorescein diacetate (DCFDA) assays. Gene expression of inflammation/oxidative stress-related transcripts (MMP1/MMP3/INOS/COX2) was evaluated by qRT-PCR using TBP as reference. Results. NO was detected only in inflamed chondrocytes and Diart® was able to abolish its levels. NO was not detected in synoviocytes in all conditions. IL-1B reduced both cytoplasmic (−66%) and mitochondrial (−68%) ROS in chondrocytes, with Diart® partially restoring (+40%) mitochondrial levels. In synoviocytes, IL-1B did not alter ROS, with Diart® modestly increasing (+27%) mitochondrial levels. Inflammation was able to increase transcript levels of all tested markers, with the exception of INOS in synoviocytes. In chondrocytes, Diart® significantly (p < 0.05) reduced COX2 (−75%) and MMP1 (−33%). In synoviocytes, Diart® significantly reduced COX2 (−77%) and MMP3 (−84%), with MMP1 53% decreased albeit without reaching statistical significance. Conclusions. Diart. ®. biochemical and physiologic properties in the tested in vitro model of inflammation on donor-matched chondrocytes and synoviocytes allowed reducing inflammation and oxidative stress-related markers, prompting the use of this combination as successful strategy to manage OA-related symptoms

Osteoarthritis of the trapezometacarpal joint is a common form of arthritis. At present, there is a significant void between conservative and operative managements. Viscosupplementation is occasionally considered as an in-between therapy. We aimed to compare the therapeutic benefit of a single intra-articular injection of Sodium Hyaluronate (SH; Ostenil®mini) to a single intra-articular injection of Methylprednisolone Acetate (MA; Depomedrone) in the management of rhizarthrosis (TMOA; Trapezometacarpal Osteoarthritis). A retrospective review was performed over a 12 month period. We reviewed 25 patients who had received a single injection of viscosupplementation (SH) performed with fluoroscopic guidance and had been followed up at 12 weeks. These patients were compared with 21 patients who had received a single steroid injection (MA) and had been followed up at 12 weeks. Of the SH group, 52% (n = 13) reported some benefit from the injection. The MA group reported an 86% (n=18) benefit from the injection. We found that a single injection of viscosupplementation (SH) is effective in relieving pain and improving function in about half of patients with rhizarthrosis (TMOA). The efficacy of a single steroid injection (MA), however, was superior with a far greater proportion of patients reporting analgesic and functional benefits

Introduction. Tendon ruptures represent one of the most common acute tendon injuries in adults worldwide, affecting millions of people anually and becoming more prevalent due to longer life expectancies and sports activities. Current clinical treatments for full tears are unable to completely restore the torn tendons to their native composition, structure and mechanical properties. To address this clinical challenge, tissue-engineered substitutes will be developed to serve as functional replacements for total tendon ruptures that closely resemble the original tissue, restoring functionality. Method. Water borne polyurethanes (WBPU) containing acrylate groups, specifically polyethylene glycol methacrylate (PEGMA) or 2-hydroxyethyl methacrylate (HEMA), were combined with mouse mesenchymal stem cells (MoMSCs) and heparin sodium to formulate bioinks for the fabrication of scaffolds via extrusion-based 3D bioprinting. Result. The biocompatibility of acrylated-WBPUs was confirmed in 2D with MoMSCs using lactate dehydrogenase assay, DNA assay and live/dead assays. Cell-laden scaffolds were 3D-bioprinted by encapsulating MoMSCs at varying cell densities within the acrylated WBPUs. The resulting 3D structures support cell viability and proliferation within the scaffolds, as confirmed by live/dead assay, lactate dehydrogenase assay and DNA assays. Differentiation studies in the 3D-bioprinted scaffolds demonstrated the phenotype transition of MoMSCs toward tenocytes through gene expression and protein deposition analysis. The inclusion of sodium heparin in the bioinks revealed increased synthesis of matrix assembly proteins within the 3D-bioprinted constructs. Conclusion. The developed bioinks were biocompatible and printable, supporting cell viability within the 3D-bioprinted scaffold. The fabricated cell-laden constructs sustained cell proliferation, differentiation, and tissue formation. The addition of heparin sodium enhanced tissue formation and organization, showing promising results for the regeneration of tendon total ruptures. Principio del formularioThis work was supported by the Spanish State Research Agency (AEI) under grant No CPP2021-008754. The authors would like to thank their partners in the project, which are in charge of the synthesis of heparin sodium and acrylated-WBPUs

Background. Patients who undergo elective hip and knee arthroplasty often have multiple risk factors increasing their likelihood of suffering from hyponatraemia post operatively. Consequently suffering from hyponatraemia post elective hip and knee arthroplasty is common. Consequently we wanted to assess the occurrence of hyponatraemia in our elective arthroplasty unit, assess our effectiveness in managing this and importantly assess how its occurrence impacted on length of patient stay. Method. Retrospective analysis of elective hip and knee arthroplasty patients over a five month period. Pre-operative and post-operative sodium levels analysed and their grade measured using NICE reference ranges. In post-operative hyponatraemic patients blood results were analysed up until discharge. Discharge summaries were reviewed to assess communication between primary and secondary care. Length of admission calculated. Formal action plan developed in partnership with the anaesthetic department to improve future management. Results. 103 patients assessed. 24 (23%) suffered from post-operative hyponatraemia. 11 (48%) were discharged with a normalised sodium. 7 (29%) had documentation regarding their hyponatraemia in the discharge summary. 101 (98%) had a sodium drop post-operatively and 2 patients were hyponatraemic pre-operatively. Average length of stay for hyponatraemic hip patients was 5.00 days compared to 4.20 days for patients with normal sodium levels. Hyponatraemic post op knee patients had an average in hospital stay of 5.09 days compared to 4.13 days in knee patients with a normal post-operative sodium level. Conclusion. Hyponatraemia is common in the post-operative arthroplasty patient. In our unit it led to an increase in length of hospital stay. We believe the introduction of a structured post-operative oral rehydration regime with isotonic fluid would be a simple method to reduce occurrence post operatively. We feel standardising intra-operative fluid prescribing will reduce the likelihood of pushing patients into a post-operative hyponatraemic state. Finally we have introduced a hyponatraemia management flowchart to the department so ward based doctors can recognise and effectively manage hyponatraemic patients. If these measures are implemented length of stay in hospital can potentially be reduced

The aim of this study is to print 3D polycaprolactone (PCL) scaffolds at high and low temperature (HT/LT) combined with salt leaching to induced porosity/larger pore size and improve material degradation without compromising cellular activity of printed scaffolds. PCL solutions with sodium chloride (NaCl) particles either directly printed in LT or were casted, dried, and printed in HT followed by washing in deionized water (DI) to leach out the salt. Micro-Computed tomography (Micro-CT) and scanning electron microscope (SEM) were performed for morphological analysis. The effect of the porosity on the mechanical properties and degradation was evaluated by a tensile test and etching with NaOH, respectively. To evaluate cellular responses, human bone marrow-derived mesenchymal stem/stromal cells (hBMSCs) were cultured on the scaffolds and their viability, attachment, morphology, proliferation, and osteogenic differentiation were assessed. Micro-CT and SEM analysis showed that porosity induced by the salt leaching increased with increasing the salt content in HT, however no change was observed in LT. Structure thickness reduced with elevating NaCl content. Mass loss of scaffolds dramatically increased with elevated porosity in HT. Dog bone-shaped specimens with induced porosity exhibited higher ductility and toughness but less strength and stiffness under the tension in HT whereas they showed decrease in all mechanical properties in LT. All scaffolds showed excellent cytocompatibility. Cells were able to attach on the surface of the scaffolds and grow up to 14 days. Microscopy images of the seeded scaffolds showed substantial increase in the formation of extracellular matrix (ECM) network and elongation of the cells. The study demonstrated the ability of combining 3D printing and particulate leaching together to fabricate porous PCL scaffolds. The scaffolds were successfully printed with various salt content without negatively affecting cell responses. Printing porous thermoplastic polymer could be of great importance for temporary biocompatible implants in bone tissue engineering applications

Hip joint biomechanics can be altered by abnormal morphology of the acetabulum and/or femur. This may affect load distribution and contact stresses on the articular surfaces, hence, leading to damage and degradation of the tissue. Experimental hip joint simulators have been used to assess tribology of total hip replacements and recently methods further developed to assess the natural hip joint mechanics. The aim of this study was to evaluate articular surfaces of human cadaveric joints following prolonged experimental simulation under a standard gait cycle. Four cadaveric male right hips (mean age = 62 years) were dissected, the joint disarticulated and capsule removed. The acetabulum and femoral head were mounted in an anatomical hip simulator (Simulation Solutions, UK). A simplified twin peak gait cycle (peak load of 3kN) was applied. Hips were submerged in Ringers solution (0.04% sodium azide) and testing conducted at 1 Hertz for 32 hours (115,200 cycles). Soft tissue degradation was recorded using photogrammetry at intervals throughout testing. All four hips were successfully tested. Prior to simulation, two samples exhibited articular surface degradation and one had a minor scalpel cut and a small area of cartilage delamination. The pre-simulation damage got slightly worse as the simulation continued but no new areas of damage were detected upon inspection. The samples without surface degradation, showed no damage during testing and the labral sealing effect was more obvious in these samples. The fact that no new areas of damage were detected after long simulations, indicates that the loading conditions and positioning of the sample were appropriate, so the simulation can be used as a control to compare mechanical degradation of the natural hip when provoked abnormal conditions or labral tissue repairs are simulated

Design of bone tissue engineering scaffolds imposes a number of requirements for their physical properties, in particular porosity and mechanical behaviour. Alginates are known as a potential material for such purposes, usually deploying calcium as a cross-linker. Calcium over-expression was reported having proinflammatory effect, which is not always desirable. Contrary to this, barium has better immunomodulatory outcome but data for barium as a cross-linker are scarce. In this work the objective was to produce Ba-linked alginates and compare their viscoelastic properties with Ca-linked controls in vitro. Sodium alginate aqueous solution (1 wt%) with 0.03 wt.% CaCl. 2. is gelled in dialysis tubing immersed in 27 mM CaCl. 2. (controls) or BaCl. 2. , for 48 h, followed by freeze-drying and rehydration (with 0.3 wt.% CaCl. 2. and 0.8 wt.% NaCl). Hydrogel discs (diameter 8-10 mm, thickness 4-6 mm) were assessed in dry and wet (DMEM immersed) states by dynamic mechanical analysis (DMA) under compressive creep conditions with increased loads, frequency scans and strain-controlled sweeps in physiological range (0.1-20 Hz) at 25°C and 37°C. Resulting data were analysed by conventional methods and by a model-free BEST (Biomaterials Enhanced Simulation Testing) to extract invariant values and material functions. Significant differences were observed in properties of Ba-linked hydrogel scaffolds vs. Ca-linked controls. Specifically, for the similar porosity Ba-samples exhibited lower creep compliance, higher dynamical stiffness and lower loss factor in the whole studied range. Invariant modulus exhibited a non-linear decay vs. applied stress. These differences were observed in both dry and wet states and temperatures. Use of barium as a cross-linker for alginates allows further modification of biomechanical properties of the scaffolds for better compliancy to the tissues in the application. Barium release might have an immunomodulating effect but also promote ion exchange for osteogenesis due to additional Ca/Ba concentration gradient

Infection of implanted medical devices (biomaterials), like titanium orthopaedic implants, can have disastrous consequences, including removal of the device. These so-called biomaterial-associated infections (BAI) are mainly caused by Staphylococcus aureus and Staphylococcus epidermidis. To prevent biofilm formation using a non-antibiotic based strategy, we aimed to develop a novel permanently fixed antimicrobial coating for titanium devices based on stable immobilized quaternary ammonium compounds (QACs). Medical grade titanium implants were dip-coated in subsequent solutions of hyperbranched polymer, polyethyleneimine and 10 mM sodium iodide, and ethanol. The QAC-coating was characterized using water contact angle measurements, scanning electron microscopy, FTIR, AFM and XPS. The antimicrobial activity of the coating was evaluated against S. aureus strain JAR060131 and S. epidermidis strain ATCC 12228 using the JIS Z 2801:2000 surface microbicidal assay. Lastly, we assessed the in vivo antimicrobial activity in a mouse subcutaneous implant infection model with S. aureus administered locally on the QAC-coated implants prior to implantation to mimic contamination during surgery. Detailed material characterization of the titanium samples showed the presence of a homogenous and stable coating layer at the titanium surface. Moreover, the coating successfully killed S. aureus and S. epidermidis in vitro. The QAC-coating strongly reduced S. aureus colonization of the implant surface as well as of the surrounding tissue, with no apparent macroscopic signs of toxicity or inflammation in the peri-implant tissue at 1 and 4 days after implantation. An antimicrobial coating with stable quaternary ammonium compounds on titanium has been developed which holds promise to prevent BAI. Non-antibiotic-based antimicrobial coatings have great significance in guiding the design of novel antimicrobial coatings in the present, post-antibiotic era. Acknowledgements: This research was financially supported by the Health∼Holland/LSH-TKI call 2021–2022, project 25687, NACQAC: ‘Novel antimicrobial coatings with stable non-antibiotic Quaternary Ammonium Compounds and photosensitizer technology'

Platelet Rich Plasma (PRP), either rich (L-PRP) or poor (P-PRP) of leukocytes, is frequently used as an anti-inflammatory and regenerative tool in osteoarthritis (OA). PRP contains proteins but not genes as it is derived from megakaryocytes. Proteomics but not metabolomics of PRP was recently studied. Metabolomics is a field of ‘omics’ research involved in comprehensive portrayal of the small molecules, metabolites, in the metabolome. These small molecules can be endogenous metabolites or exogenous compounds found in an organism (1). Our aim was to determine the difference between L-PRP and P-PRP. A cross-sectional clinical study was designed in six recreational male athletes between the ages of 18 and 35 years. 3 mL P-PRP and 3 mL -LPRP was prepared from 60 mL of venous blood after treating with 9 mL of sodium citrate and centrifugation at 2.700 rpm for 10 min. Half of the prepared PRP's were frozen at −20°C for a week. Fresh and frozen samples were analyzed at the Q-TOF LC/MS device after thawing to room temperature. Untargeted metabolomic results revealed that the metabolomic profile of the L-PRP and P-PRP were significantly different from each other. A total of 33.438 peaks were found. Statistically significant (p<0.05) peaks were uploaded to the MetaboAnalyst 5.0 platform. Exogenous out of 2.308 metabolites were eliminated and metabolites found significant for our study were subjected to pathway analysis. Steroid biosynthesis, sphingolipid metabolism and metabolism of lipid pathways were affected. In the L-PRP samples, Nicotinamide riboside (FC: 2.2), MHPG (FC: 3.0), estrone sulfate (FC: 7.5), thiamine diphosphate (FC: 2.0), leukotriene E4 (FC: 7.5), PC(18:1 (9Z)e/2:0) (FC: 9.8) and Ap4A (FC: 2.1) were higher compared to P-PRP. C24 sulfatide (FC: −11.8), 3-hexaprenyl-4,5-dihydroxybenzoic acid (FC: −2.8) metabolites were furthermore lower in P-PRP. Clinical outcomes of PRP application should consider these metabolic pathways in future studies (2)

Abstract. Objectives. The aim of this study was to develop an in vitro GAG-depleted patella model and assess the biomechanical effects following treatment with a SAP:CS self-assembling hydrogel. Methods. Porcine patellae (4–6 month old) were harvested and subject to 0.1% (w/v) sodium dodecyl sulfate (SDS) washes to remove GAGs from the cartilage. Patellae were GAG depleted and then treated by injection with SAP (∼ 6 mM) and CS (10 mg) in Ringer's solution through a 30G needle. Native, GAG depleted and SAP:CS treated patellae were tested through static indentation testing, using 15g load, 5mm indenter over 1hr period. The degree of deformation of each group was assessed and compared (Mann-Whitney, p<0.05). Native, GAG depleted, sham (saline only) and SAP:CS treated paired patellae and femurs were additionally characterized tribologically through sequential wear testing when undergoing a walking gait profile (n=6 per group). The cartilage surfaces were assessed and compared (Mann-Whitney, p<0.05) using the ICRS scoring system, surface damage was illustrated through the application of Indian ink. Results. Static indentation tests indicated significant increase in indentation deformation of GAG depleted group compared to native group (n=6, p<0.01) and significant reduction in deformation of SAP:CS treated group compared to GAG depleted group (n=6, p<0.05). Sequential wear tests indicated a significant increase in the cartilage damage on the both surfaces of the patellofemoral joint in the GAG depleted group, compared to the native group (n=6, p<0.001), Following SAP:CS treatment, significant protection from damage was observed on femoral surface (n=6, p<0.005), with some non-significant reduction in damage on the patella surface. Sham injections showed no significant increase in damage compared to the native and treated samples. Conclusions. The ∼50% reduction of GAGs represented a moderate osteoarthritic patella cartilage model. This same loss transferred to the dynamic wear tests with significant changes in the damage on the femoral counter face associated with the GAG loss. SAP:CS treatment showed promise in restoring cartilage stiffness to treat Chondromalacia patella in static indentation tests. Sequential wear tests showed that the SAP:CS treatment protects the cartilage layer of both surfaces in the patellofemoral joint from damage in an extreme degeneration model. The sham injections showed that injecting cartilage with a 30G and saline does not cause any significant damage to the cartilage layer. Declaration of Interest. (a) fully declare any financial or other potential conflict of interest

Abstract. Introduction. Bone grafts are utilised in a range of surgical procedures, from joint replacements to treatment of bone loss resulting from cancer. Decellularised allograft bone is a regenerative, biocompatible and immunologically safe potential source of transplant bone. Objectives. To compare the structural and biomechanical parameters of decellularised and unprocessed (cellular) trabecular bone from the human femoral head (FH) and tibial plateau (TP). Methods. Bone pins were harvested from 10 FHs and 11 TPs (27, 34 respectively). Pins were decellularised (0.1% w/v sodium dodecyl sulphate) or retained as cellular controls. QA testing was carried out to assess protocol efficacy (total DNA and histological analysis). Cellular and decellularised FH (n=7) and TP (n=10) were uCT scanned. Material density (MD); apparent density (BV/TV); trabecular connectivity; trabecular number; trabecular thickness (Tb-t) and trabecular spacing were measured. Pins were then compression tested to determine ultimate compressive stress (UCS), Young's modulus and 0.2% proof stress. Results. Total DNA levels of decellularised bone were below 50 ng.mg. −1. dry weight. Cell nuclei and marrow were largely removed. No significant differences in properties were found between decellularised and cellular bone from either anatomical region (p>0.05, Mann-Whitney). No significant differences in biomechanical properties were found between cellular FH and cellular TP (p>0.05) though significant differences in structural properties were found (MD: TP>FH, p=0.001; BV/TV: FH>TP, p=0.001; and Tb-t: FH>TP, p=0.005). Significant differences were found between decellularised FH and decellularised TP (UCS: FH>TP, p=0.001; Young's modulus: FH>TP, p=0.002; proof stress; FH>TP, p=0.001; MD: TP>FH, p<0.001; BV/TV: FH>TP, p<0.001 and Tb-t: FHT>P p<0.001. Conclusion. Decellularisation did not affect the properties of human trabecular bone. Differences were found between the mechanical and structural properties of decellularised FH and TP which could facilitate stratified bone grafts for different applications. Declaration of Interest. (a) fully declare any financial or other potential conflict of interest

Introduction and Objective. Hemorrhagic shock and fractures are the most common injuries within multiple injured patients, inducing systemic and local inflammation in NF-kappaB-dependent manner. Alcohol intoxication, showing a high incidence with severe injuries, has immunomodulatory properties and implicates NF-kappaB downregulation. However, the mechanism is largely unknown. A20 deubiquitinase is a critical negative regulator of NF-kappaB activity and inflammation. Here, we investigate the role of A20 as a modifier of NF-kappaB-driven inflammation and remote lung injury in severely injured and alcohol-intoxicated mice. Materials and Methods. Mice were randomly divided into four groups. Either sodium chloride or ethanol (35%, EtOH) was administrated by intragastral gavage one hour before trauma induction. In the trauma group, the animals underwent an osteotomy with external fracture fixation (Fx) followed by a pressure-controlled hemorrhagic shock (35±5 mmHg; 90 minutes) with subsequent resuscitation (H/R). Sham-operated animals underwent only surgical procedures. Mice were sacrificed at 24 hours. Fatty vacuoles and thus, the alcohol intoxication were evaluated by Oil red O staining of the liver. To assess the lung injury, hematoxylin eosin staining, determination of total protein concentration in bronchoalveolar lavage (BALF) and calculation of the lung injury score (LIS) were performed. Lungs were stained for neutrophil elastase, CXCL1 and active caspase-3 to determine neutrophil invasion, pro-inflammatory changes and apoptosis, respectively. The expression level of A20 was evaluated by immunofluorescence microscopy. Results. EtOH induced significant fatty changes in the liver. Fx+H/R led to trauma-induced lung injury, significantly enhancing the total protein concentration in the BALF and the histomorphological LIS compared to sham animals. In turn, EtOH reduced the lung injury in Fx+H/R. The expression of CXCL1 and activated caspase-3 as well as the pulmonary neutrophil infiltration were significantly enhanced in Fx+H/R vs. sham, whereas A20 protein expression was reduced. EtOH+Fx+H/R caused reduced pulmonary neutrophil invasion, CXCL1 expression, and apoptosis compared to Fx+H/R, whereas the A20 protein expression in the lungs was increased. Conclusions. In murine Fx+H/R trauma model, EtOH ameliorates the extent of the remote lung injury. The immunosuppressive effect may be caused by elevated pulmonary levels of A20 deubiquitase, indicating a suppression of NF-kappaB activation

Introduction and Objective. The choice of appropriate characteristics is crucial to favor a firm bonding between orthopedic implants and the host bone and to permit bone regeneration. In particular, the morphology and composition of the biointerface plays a crucial role in orchestrating precise cellular responses. Here, to modulate the biointerface, we propose new biomimetic coatings, having multi-scale nano- to micro- morphological cues and a composition mimicking the mineral phase of bone. Materials and Methods. Films on various substrates are obtained by Ionized Jet Deposition (IJD), by ablation of biogenic apatite and annealing at 400°C for 1 hour. Films are proposed for functionalization of metallic implants, but application to heat sensitive porous (3D printed) substrates is also shown, as it permits to further boost biomimicry (by addition of collagen/gelatin), thus reproducing the architecture of cancellous bone. In IJD, coatings thickness can be selected by tuning deposition duration. Here, a 450 nm thickness is selected based on preliminary results. Micro-rough titanium alloy (Ti6Al4V) disks (roughness 5 μm) are used as a substrate for the deposition and as a control. The coatings are characterized in terms of composition (GI-XRD, EDS, FT-IR microscopy), morphology (FEG-SEM, AFM, data processing by ImageJ), mechanical properties (micro-scratch test) and dissolution profile in medium (pH 7.4, FEG-SEM). Then, their behavior is characterized in vitro (human bone marrow-derived mesenchymal stromal cells - hMSCs), by studying cells early adhesion (focal adhesion by vinculin staining), viability (Alamar Blue), morphology (SEM) and differentiation (expression of RUNX2, ALPL, SPARC and COL1A1, BMP2, BGLAP, osteocalcin, alkaline phosphatase, collagen type I) at 3, 7 and 14 days. Results. Films exhibit a biomimetic composition, as they are constituted by a nanocrystalline multi-doped carbonated hydroxyapatite. EDS indicates the presence of trace ions sodium (0,11 ± 0,02 wt%) and magnesium (0,47 ± 0,05 wt%), uniformly distributed in the coating in a percentage close to native bone. These ion-substitutions are crucial, as each ion modifies apatite solubility and ion-release in the peri-implant environment and has important biological role. Films have a high adhesion to the substrates and a suitable dissolution profile. The morphology is highly rough, as films are composed by nanosized grains (minimum diameter 40 nm) aggregated in multi-scale clusters (diameter range: 100 nm-2 μm). Morphology of the aggregates can be tuned by selecting deposition duration and also depends on the morphology, roughness and composition of the substrate. Because of the nanoscale thickness of the films, they do not alter the microscale features of the implants. For fibrous substrates, films grow onto the fibers surface, with no pore occlusion or damage to substrate composition. Coatings do not alter the metabolic activity of MSCs but influence their early adhesion, morphology and differentiation. More in detail, MSCs on coated disks show a branched shape, while those on the controls show a more spindle and elongated morphology. Coatings increase hMSCs early adhesion, as a higher density and a greater area of focal adhesions are observed at 24 hours. Finally, they can trigger a signaling pathway that promotes the osteogenic differentiation of hMSCs, as confirmed by quantification of osteocalcin, alkaline phosphatase and collagen, even in the absence of osteogenesis-inducing factors. Conclusions. The topographical and chemical cues of the biomimetic nanostructured coating are perceived by hMCSs, showing that combining morphological and biomimetic cues is a promising route for the development of cells-instructive biomaterials for orthopedics. In vivo tests on rabbit models are in progress

Introduction. This study investigated the binding agent Calcium/Sodium Alginate fibre gel and the addition of autogenic bone marrow aspirate (BMA) on bone growth into a porous HA scaffold implanted in an ovine femoral condyle critical-sized defect. Our hypothesis was that Alginate fibre gel would have no negative effect on bone formation and osteoconduction within the scaffold and that BMA would augment the incorporation of the graft with the surrounding bone at 6 and 12 weeks post implantation. Methods. 24, 8mm x 15mm defects were filled with either porous HA granules, porous HA granules + Alginate fibre gel (HA putty) or porous HA granules + Alginate fibre gel + BMA (HA putty +BMA) and remained in vivo for 6 and 12 weeks (n=4). 1ml of bone marrow aspirate per cm3 of graft was used. Image analysis quantified bone apposition rates, bone ingrowth, bone-implant contact and quantity of graft. Mann Whitney U tests were used for statistical analysis where p<0.05 was considered significant. Results. Highest bone formation were measured in the 12 week HA putty+BMA group (1.57±0.24(micromillimetres/day). HA granules at 12 weeks encouraged the greatest increase in bone formation (33.56±3.53%). Smaller amounts of bone was measured in the 6 week HA putty+BMA group (8.57±2.86%). Bone formation in the HA group at 12 weeks was significantly higher when compared with the HA putty (p= 0.043) and the HA putty+BMA group (p= 0.043). At both the 6 and 12 week time point, highest bone-implant contact was seen in the HA granules group (59.34±10.89% and 72.65±3.38% respectively) when compared with both the HA putty (p=0.018) and HA putty+BMA (p=0.047). Results showed no significant difference in the amount of implant remaining when each group was compared. Conclusions. Results from this study showed that the inclusion of BMA did not augment bone growth to the scaffold or increase its osteoconductive capacity when combined with Calcium/Sodium Alginate fibre gel. Further research is necessary to optimise Calcium/Sodium Alginate fibre gel when used to bind HA granules and to investigate the effect of BMA with this type of HA alone

Bone tissue engineering attempts at substituting critical size bone defects with scaffolds that can be primed with osteogenic cells, usually mesenchymal stem cells (MSC) from the bone marrow. Although overlooked, peripheral blood is a valuable source of MSC and circulating osteoprogenitors (COP), bearing a significant regenerative potential, and peripheral blood is easier to access than bone marrow. We thus studied osteodifferentiation of peripheral blood mononuclear cells (pbMNC) under different culture conditions, and how they compared to primary human osteoblasts. pbMNC were isolated from healthy adult volunteers by Ficoll density gradient centrifugation, and they were then cultured using media supplemented with 100nM Dexamethasone, 10mM sodium β-glycero phosphate and ascorbic acid (either 40mM or 0.05mM). For comparison, primary osteoblasts were isolated from the femoral heads of patients undergoing hip arthroplasty. After 4 weeks of culture, osteogenic activation was quantified with spectrometric measurement of alkalic phosphatase (ALP) and lactate dehydrogenase (LDH) levels. The extent of osteoid mineralization was measured with Alizarin red staining. We studied the effects of 1) varying cell concentration at seeding, 2) surface coating of culture wells with collagen and 3) high compared to low ascorbic acid (40mM and 0.05mM) media. Higher numbers of pbMNC (0.5–5.9 versus 0.062–0.25 million cells per well) at seeding resulted in a lower ALP/LDH-ratio (mean ± standard deviation), 0.39 ± 0.33 arbitrary units (AU) versus 1.36 ± 1.06 AU, but led to higher amount of osteoid production, 0.10 ± 0.06 versus 0.065 ± 0.02 AU, p < 0.05. Culture of pbMNC on collagen did not confer any difference in ALP/LDH-ratios, with 0.43 ± 0.3 AU for collagen-coated and 0.43 ± 0.41 AU for uncoated wells (p = 0.95), and we also observed no relevant difference in osteoid production (0.07 ± 0.01 AU for collagen-coated versus 0.1 ± 0.08 AU for uncoated wells, p = 0.28). Cultures of pbMNC on collagen in media supplemented with a higher concentration of ascorbic acid showed a 130% higher ALP/LDH-ratio when compared to cultures exposed to a lower ascorbic acid concentration (p < 0.05). Cultures with a low initial concentration of pbMNC (0.5 − 1 million cells) had no significantly different ALP/LDH-ratio when compared to primary human osteoblasts, but the cultures of pbMNC resulted in a 90% increase in osteoid mineralization when compared to primary human osteoblasts (p < 0.05). These findings indicate that progenitor cells derived from peripheral blood have a significant osteogenic potential, rendering them interesting candidates for seeding of scaffolds intended to fill critical sized bone defects. pbMNC produced almost double the amount of osteoid as primary osteoblasts. The isolation of pbMSC and COP is non-invasive and easy, and they might be seeded directly onto scaffolds without prior ex-vivo expansion, a question that we intend to pursue further

Modular hip prostheses were introduced to optimize the intra-surgical adaptation of the implant design to the native anatomy und biomechanics of the hip. The downside of a modular implant design with an additional modular interface is the potential susceptibility to fretting, crevice corrosion and wear. For testing hip implants with proximal femoral modularity according to ISO & ASTM, sodium chloride solutions are frequently used to determine the fatigue strength and durability of the stem-neck connection. The present study illustrate that the expansion of standard requirements of biomechanical testing is necessary to simulate metal ion release as well as fretting and crevice corrosion by using alternative test fluids. To assess the primary stability of tibial plateaus in vitro, different approaches had been undergone: cement penetration depth analysis, static tension or compression loading until interface failure. However, these test conditions do not reflect the in vivo physiologic loading modes, where the tibial plateau is predominantly subjected to combined compression and shear forces. The objectives were to evaluate the impact of the tibial keel & stem length on the primary stability of a posterior-stabilised tibial plateau under dynamic compression-shear loading conditions in human tibiae

Decellularised extracellular matrix scaffolds show great promise for the regeneration of damaged musculoskeletal tissues (cartilage, ligament, meniscus), however, adequate fixation into the joint remains a challenge. Here, we assess the osseo-integration of decellularised porcine bone in a sheep model. This proof-of-concept study supports the overall objective to create composite decellularised tissue scaffolds with bony attachment sites to enable superior fixation and regeneration. Porcine trabecular bone plugs (6mm diameter, 10mm long) were decellularised using a novel bioprocess incorporating low-concentration sodium dodecyl sulphate with protease inhibitors. Decellularised bone scaffolds (n=6) and ovine allograft controls (n=6) were implanted into the condyle of skeletally mature sheep for 4 and 12 weeks. New bone growth was visualised by oxytetracycline fluorescence and standard resin semi-quantitative histopathology. Scaffolds were found to be fully decellularised and maintained the native microarchitecture. Following 4-week implantation in sheep, both scaffold and allograft appeared well integrated. The trabecular spaces of the scaffold were filled with a fibro-mesenchymal infiltrate, but some areas showed a marked focal lymphocytic response, associated with reduced bone deposition. A lesser lymphocytic response was observed in the allograft control. After 12-weeks the lymphocytic reaction was minimised in the scaffold and absent in allografts. The scaffold showed a higher density of new mineralized bone deposition compared to allograft. New marrow had formed in both the scaffold and allografts. Following the demonstration of osteointegration this bioprocess can now be transferred to develop decellularised composite musculoskeletal tissue scaffolds and decellularised bone scaffolds for clinical regeneration of musculoskeletal tissues

Hyponatraemia is one of the most common electrolyte disorders in the elderly and has considerable associated morbidity and mortality. In this study we report the prevalence and independent risk factors for the development of post-operative hyponatraemia after surgery for hip fracture. We conducted a retrospective cohort study of 144 consecutive patients who underwent surgery after sustaining a hip fracture. Patient medical case-notes, operative notes and online biochemistry results were used to obtain relevant data which was entered into a database. Pre-operative (30/144, 21%) and post-operative hyponatraemia (49/144, 34%) was common. However, most cases were mild (plasma sodium >130 mmol/l) and only 1% of pre-operative and 6% of post-operative patients had moderate/severe hyponatraemia (plasma sodium <130mmol/l). One of 3 post-operative deaths involved a patient with moderate hyponatraemia as a consequence of severe congestive cardiac failure. In order to determine the independent relationship between several reported risk factors and hyponatraemia we constructed a multivariable logistic regression model. Female gender, pre-operative hyponatraemia and hypotonic fluid administration were all significantly associated with the development of post-operative hyponatraemia. Age and thiazide diuretics both had positive risk associations however were not statistically significant. Hyponatraemia is a common problem in hip fracture patients. While the majority of cases in this series were mild, 6% of patients suffered from moderate/severe hyponatraemia post-operatively. Female gender, pre-operative hyponatraemia and hypotonic fluid administration are all important and independent risk factors for the development of hyponatraemia. Hypotonic intravenous fluids should be avoided unless clinically indicated in this patient group