We test the clinical validity and financial implications of the proposed Choosing Wisely statement: “Using ultrasound as a screening test for shoulder instability is inappropriate in people under 30 years of age, unless there is clinical suspicion of a rotator cuff tear.”. A retrospective chart review from a specialist shoulder surgeon's practice over a two-year period recorded 124 patients under the age of 30 referred with shoulder instability. Of these, forty-one had already had ultrasound scans performed prior to specialist review. The scan results and patient files were reviewed to determine the reported findings on the scans and whether these findings were clinically relevant to diagnosis and decision-making. Comparison was made with subsequent MRI scan results. The data, obtained from the Accident Compensation Corporation (ACC), recorded the number of cases and costs incurred for ultrasound scans of the shoulder in patients under 30 years old over a 10-year period. There were no cases where the ultrasound scan was considered useful in decision-making. No patient had a full thickness rotator cuff tear. Thirty-nine of the 41 patients subsequently had MRI scans. The cost to the ACC for funding ultrasound scans in patients under 30 has increased over the last decade and exceeded one million dollars in the 2020/2021 financial year. In addition, patients pay a surcharge for this test. The proposed Choosing Wisely statement is valid. This evidence supports that ultrasound is an unnecessary investigation for patients with shoulder instability unless there is clinical suspicion of a rotator cuff tear. Ultrasound also incurs costs to the insurer (ACC) and the patient. We recommend x-rays and, if further imaging is indicated, High Tech Imaging with MRI and sometimes CT scans in these patients

In recent years, there has been a growing interest to incorporate ultrasound into computer assisted orthopaedic surgery procedures in order to provide non-ionizing intra-operative imaging alternative to traditional fluoroscopy. However, identification of bone boundaries still continues to be a challenging process due low signal to noise ratio and imaging artifacts. The quality of the collected images also depends on the orientation of the ultrasound transducer with respect to the imaged bone surface. Shadow region is an important feature indicating the presence of a bone surface in the collected ultrasound data. In this work, we propose a framework for the enhancement of shadow regions from extended field of view spine ultrasound data. First bone surfaces are enhanced using a combination of local phase based image features. The combination of the phase features provides a more compact representation of vertebrae bone surfaces with supressed soft tissue interfaces. These enhanced features are used as an input to a L1 norm based regularisation method which emphasised uncertainty in the shadow regions. Validation on phantom and in vivo experiments achieve a mean dice coefficient value of 0.93 and 0.9 respectively

The opposable thumb is one of the defining characteristics of human anatomy and is involved in most activities of daily life. Lack of optimal thumb motion results in pain, weakness, and decrease in quality of life. First carpometacarpal (CMC1) osteoarthritis (OA) is one of the most common sites of OA. Current clinical diagnosis and monitoring of CMC1 OA disease are primarily aided by X-ray radiography; however, many studies have reported discrepancies between radiographic evidence of CMC1 OA and patient-related outcomes of pain and disability. Radiographs lack soft-tissue contrast and are insufficient for the detection of early characteristics of OA such as synovitis, which play a key role in CMC OA disease progression. Magnetic resonance imaging (MRI) and two-dimensional ultrasound (2D-US) are alternative options that are excellent for imaging soft tissue pathology. However, MRI has high operating costs and long wait-times, while 2D-US is highly operator dependent and provides 2D images of 3D anatomical structures. Three-dimensional ultrasound imaging may be an option to address the clinical need for a rapid and safe point of care imaging device. The purpose of this research project is to validate the use of mechanically translated 3D-US in CMC OA patients to assess the measurement capabilities of the device in a clinically diverse population in comparison to MRI. Four CMC1-OA patients were scanned using the 3D-US device, which was attached to a Canon Aplio i700 US machine with a 14L5 linear transducer with a 10MHz operating frequency and 58mm. Complimentary MR images were acquired using a 3.0 T MRI system and LT 3D coronal photon dense cube fat suppression sequence was used. The volume of the synovium was segmented from both 3D-US and MR images by two raters and the measured volumes were compared to find volume percent differences. Paired sample t-test were used to determine any statistically significant differences between the volumetric measurements observed by the raters and in the measurements found using MRI vs. 3D-US. Interclass Correlation Coefficients were used to determine inter- and intra-rater reliability. The mean volume percent difference observed between the two raters for the 3D-US and MRI acquired synovial volumes was 1.77% and 4.76%, respectively. The smallest percent difference in volume found between raters was 0.91% and was from an MR image. A paired sample t-test demonstrated that there was no significant difference between the volumetric values observed between MRI and 3D-US. ICC values of 0.99 and 0.98 for 3D-US and MRI respectively, indicate that there was excellent inter-rater reliability between the two raters. A novel application of a 3D-US acquisition device was evaluated using a CMC OA patient population to determine its clinical feasibility and measurement capabilities in comparison to MRI. As this device is compatible with any commercially available ultrasound machine, it increases its accessibility and ease of use, while proving a method for overcoming some of the limitations associated with radiography, MRI, and 2DUS. 3DUS has the potential to provide clinicians with a tool to quantitatively measure and monitor OA progression at the patient's bedside

16 to 34% of the population suffer from shoulder pain, the most common cause being rotator cuff tears. NICE guidance recommends using ultrasound scan (USS) or MRI to assess these patients, but does not specify which is preferable. This study assesses the accuracy of USS and MRI in rotator cuff tears in a DGH, to establish the most appropriate imaging modality. Patients who had at least two of shoulder ultrasound, MRI or arthroscopy within a seven month period (n=55) were included in this retrospective study. Sensitivity, Specificity, Positive Predictive Value (PPV) and Negative Predictive Value (NPV) were calculated using arthroscopy as the true result, and kappa coefficients calculated for each pairing. 59 comparisons were made in total. Sensitivity for MRI in full supraspinatus tears was 0.83, and for USS 0.75. Specificity for MRI in these tears was 0.75, and for USS 0.83. Values were much lower in other tears, which occurred less frequently. USS and MRI completely agreed with each other 61.3% of the time. Both modalities were only completely accurate 50% of the time. Kappa coefficient between arthroscopy and MRI for supraspinatus tears was 0.658, and for USS was 0.615. There was no statistical difference between MRI and USS sensitivity or specificity (p=1), suggesting that one modality cannot be recommended over the other for full supraspinatus tears. They also do not tend to corroborate one another, suggesting that there is no benefit from doing both scans. Further research is needed to see how both modalities can be improved to increase their accuracy

Introduction. At present, orthopaedic surgeons utilize either CT, MRI or X-ray for imaging a joint. Unfortunately, CT and MRI are quite expensive, non weight-bearing and the orthopaedic surgeon does not receive revenue for these procedures. Although x-rays are cheaper, similar to CT scans, patients incur radiation. Also, all three of these imaging modalities are static. More recently, a new ultrasound technology has been developed that will allow a surgeon to image their patients in 3D. The objective of this study is to highlight the new opportunity for orthopaedic surgeons to use 3D ultrasound as alternative to CT, MRI and X-rays. Methods. The 3D reconstruction process utilizes statistical shape atlases in conjunction with the ultrasound RF data to build the patient anatomy in real-time. The ultrasound RF signals are acquired using a linear transducer. Raw RF data is then extracted across each scan line. The transducer is tracked using a 3D tracking system. The location and orientation for each scan line is calculated using the tracking data and known position of the tracker relative to the signal. For each scan line, a detection algorithm extracts the location on the signal of the bone boundary, if any exists. Throughout the scan process, a 3D point cloud is created for each detected bone signal. Using a statistical bone atlas for each anatomy, the patient specific surface is reconstruction by optimizing the geometry to match the point cloud. Missing regions are interpolated from the bone atlas. To validate reconstructed models output models are then compared to models generated from 3D imaging, including CT and MRI. Results. 3D ultrasound, which now has FDA approval in the United States, is presently available for an orthopaedic surgeon to use. Error analyses have been conducted in comparison to MRI and CT scans and revealed that 3D ultrasound has a similar accuracy of less than 1.0 mm in the creation of a 3D bone and soft-tissues. Unlike CT and MRI scans that take in excess of 2–3 weeks to create human bones, 3D ultrasound creates bones in 4–6 minutes. Once the bones are created, the surgeon can assess bone quality, ligament and cartilage conditions, assess osteophytes, fractures and guide needles into the 3D joint space. The creation of 3D bones has been accurately assessed for the spine, shoulder, knee, hip and ankle joints. A 3D joint pre-operative planning module has also been developed for a surgeon to size and position components before surgery. Discussion. 3D ultrasound is an exciting new imaging technology available for orthopaedic surgeons to use in their practice. Existing CPT codes are readily available for 3D ultrasound procedures. A surgeon can now evaluate and diagnose bone and soft- tissue conditions, in 3D, using ultrasound, which is safer and is an easier procedure compared to CT, MRI and X-rays. This new ultrasound technology is a highly accurate imaging technique that will allow a surgeon to diagnose bone and soft-tissue concerns in 3D, under weight-bearing, dynamic conditions and guide needle injections to correct location, in 3D

Staphylococcus aureus is responsible for 60–70% infections of surgical implants and prostheses in Orthopaedic surgery, with cumulative treatment costs for all prosthetic joint infections estimated to be ∼ $1 billion per annum (UK and North America). Its ability to develop resistance or tolerance to a diverse range of antimicrobial compounds, threatens to halt routine elective implant surgery. One strategy to overcome this problem is to look beyond traditional antimicrobial drug therapies and investigate other treatment modalities. Biophysical modalities, such as ultrasound, are poorly explored, but preliminary work has shown potential benefit, especially when combined with existing antibiotics. Low intensity pulsed ultrasound is already licensed for clinical use in fracture management and thus could be translated quickly into a clinical treatment. Using a methicillin-sensitive S. aureus reference strain and the dissolvable bead assay, biofilms were challenged with gentamicin +/− low-intensity ultrasound (1.5MHz, 30mW/cm2, pulse duration 200µs/1KHz) for 180 minutes and 20 minutes, respectively. The primary outcome measures were colony-forming units/mL (CFU/mL) and the minimum biofilm eradication concentration (MBEC) of gentamicin. The mean number of S. aureus within control biofilms was 1.04 × 109 CFU/mL. Assessment of cellular metabolism was conducted using a liquid-chromatography-mass spectrometry, as well as a triphenyltetrazolium chloride assay coupled with spectrophotometry. There was no clinically or statistically significant (p=0.531) reduction in viable S. aureus following ultrasound therapy alone. The MBEC of gentamicin for this S. aureus strain was 256 mg/L. The MBEC of gentamicin with the addition of ultrasound was reduced to 64mg/L. Metabolic activity of biofilm-associated S. aureus was increased by 25% following ultrasound therapy (p < 0 .0001), with identification of key biosynthetic pathways activated by non-lethal dispersal. Low intensity pulsed ultrasound was associated with a four-fold reduction in the effective biofilm eradication concentration of gentamicin, bringing the MBEC of gentamicin to within clinically achievable concentrations. The mechanism of action was due to partial disruption of the extracellular matrix which led to an increase of nutrient availability and oxygen tension within the biofilm. This metabolic stimulus was responsible for the reversal of gentamicin tolerance in the biofilm-associated S. aureus

Pressure ulcers are a common occurrence in individuals with spinal cord injuries, and are attributed to prolonged sitting and limited mobility. This therefore creates the need to better understand soft tissue composition, in the attempt to prevent and treat pressure ulcers. In this study, novel approaches to imaging the soft tissue of the buttocks were investigated in the loaded and unloaded position using ultrasound (US) and magnetic resonance imaging (MRI). Twenty-six able-bodied participants (n=26, 13 males and 13 females) were recruited for this study and 1 male with a spinal cord injury. Two visits using US were required, as well as one MRI visit to evaluate soft tissue thickness and composition. US Imaging for the loaded conditions was performed using an innovative chair which allowed image acquisition in the seated upright position and MRI was done in the lateral decubitus position and loading was applied to the buttocks using a newly developed MRI compatible loader. The unloaded condition was a lateral decubitus position. Soft tissue was measured between the peak of the ischial tuberosity (IT) and the proximal femur and skin. Tissue thickness reliability for US was excellent, ICC=0.934–0.981 with no significant differences between the scan days. US and MRI measures of tissue thickness were significantly correlated (r=0.68–0.91). US underestimated unloaded tissue thicknesses with a mean bias of 0.39 – 0.56 for total tissue and muscle + tendon thickness. When the buttocks were loaded, total tissue thickness was reduced by 64.2±9.1%. US assessment of soft tissue thicknesses was reliable in both positions. The unloaded measurements using US were validated with MRI with acceptable limits of agreement, albeit tended to underestimate tissue thickness. Tissue thickness, but not fatty infiltration of muscle played a role in how the soft tissue of the buttocks responded to loading

The prevalence of pseudotumours in patients with large-head metal-on-metal (MOM) THA has been the subject of implant recalls and warnings from various regulatory agencies. To date, there is no consensus on whether ultrasound or MRI is superior for the detection and following the progression of pseudotumours. Ultrasound is relatively cheap but can be operator dependent. MARS MRI has the advantage of excellent visibility of the soft tissue. However, MRI comes at a marked increase cost and takes about twice as long to perform. At our institution, we prospectively compared ultrasound to MRI for pseudotumour detection in an asymptomatic cohort of patients with MOM THAs. We enrolled 40 patients with large-head MOM THAs in the study. The mean age was 54 years (range, 34–76 years). The mean time from surgery was 54 months (range, 40–81 months). There were 28 men and 12 women. All patients underwent ultrasound and MRI using slice encoding for metal artifact correction. The gold standard was defined as follows: if both ultrasound and MRI agreed, this was interpreted as concordant and the result was considered accurate. Ultrasound and MRI agreed in 37 of 40 patients (93%). The prevalence of pseudotumours was 31% (12 of 39) in our cohort. Twenty-three of 39 patients (59%) had completely normal tests and four (10%) had simple fluid collections. Ultrasound had a sensitivity of 100% and specificity of 96% while MRI had a sensitivity of 92% and specificity of 100%. Conclusions: A negative ultrasound rules out pseudotumour in asymptomatic patients as this test is 100% sensitive. Given its lower cost, we recommend ultrasound as the initial screening tool for pseudotumours. More recently, Kwon et al have compared ultrasound to MARS MRI for following the progression of pseudotumours. They found a strong agreement between the 2 modalities for assessing change in size and consistency of pseudotumours

When compared to magnetic resonance imaging (MRI), ultrasound (US) performed by experienced users is an inexpensive tool that has good sensitivity and specificity for diagnosing rotator cuff (RC) tears. However, many practitioners are now utilizing in-office US with little to no formal training as an adjunct to clinical evaluation in the management of RC pathology. The purpose of our study was to determine if US without formal training is effective in managing patients with a suspected RC tear. This was a single centre prospective observational study. Five fellowship-trained surgeons each examined 50 participants referred for a suspected RC tear (n= 250). Patients were screened prior to the consultation and were included if ≥ 40 years old, had an MRI of their affected shoulder, had failed conservative treatment of at least 6 months, and had ongoing pain and disability. Patients were excluded if they had glenohumeral instability, evidence of major joint trauma, or osteonecrosis. After routine clinical exam, surgeons recorded their treatment plan (“No Surgery”, “Uncertain”, or “Surgery”). Surgeons then performed an in-office diagnostic US followed by an MRI and documented their treatment plan after each imaging study. Interrater reliability was analyzed using a kappa statistic to compare clinical to ultrasound findings and ultrasound findings to MRI, normal and abnormal categorization of biceps, supraspinatus, and subscapularis. Following clinical assessment, the treatment plan was recorded as “No Surgery” in 90 (36%), “Uncertain” in 96 (39%) of cases, “Surgery” in 61 (25%) cases, and incomplete in 3 (2%). In-office US allowed resolution of 68 (71%) of uncertain cases with 227 (88%) of patients having a definitive treatment plan. No patients in the “No Surgery” group had a change in treatment plan. After MRI, 16 (6%) patients in the “No Surgery” crossed-over to the “Surgery” group after identification of full-thickness tears, larger than expected tears or alternate pathology (e.g., labral tear). The combination of clinical examination and in-office US may be an effective method in the initial management of patients with suspected rotator cuff pathology. Using this method, a definitive diagnosis and treatment plan was established in 88% of patients with the remaining 12% requiring an MRI. A small percentage (6%) of patients with larger than expected full-thickness rotator cuff tears and/or alternate glenohumeral pathology (e.g., labral tear) would be missed at initial evaluation

Introduction. Failure rates of Metal-on-Metal (MoM) ASR XL hip implants have been unacceptably high compared with other bearing surfaces, so patients must be monitored over the time checking for disorders in clinical condition, blood tests or in diagnostic imaging. Objectives. We have carried out a continuing prospective investigation to evaluate the relationship between blood metal ions measurements and ultrasound levels and to evaluate if ultrasound score can predict a future indication to revision. Materials and methods. From DePuy Recall of 2010 we have monitored 106 patients (51 males, 55 females, mean age 63.6) with ASRXL implants. The controls were performed annually. The following scales were used for patients evaluation:. Ultrasound score: 0 none; 1 fluid collection <20 mm, 2 fluid collection <20 mm, 3 solid mass: metallosis. Blood metal levels of Chromium-Cobalt (Cr-Co) (μg/l = ppb): normal <3 ppb, alert between 3 and 7 ppb, pathologic <7 ppb. Clinical Score: Harris Hip Score. Rx score, evaluating the prosthetic-bone integration and the inclination of acetabular component. Patients who presented positive clinical-instrumental conditions and values of Cr and Co > 3 mg/l were checked every 6 months. Statistical analysis was carried out with Non-parametric Kruskal-Wallis test and two factors Analysis of Variance using SAS System vers. 9.4. Results. The follow-up included 110 implants (4 are bilateral case). 43 patients (39,1 %) underwent revision surgery for failed MoM utilizing ceramic-on-polyethylene devices. At a mean time of 65,7 +/− 15,9 months, 47 patients had a ultrasound score of 0 (13 revised), 32 patients had a ultrasound score of 1 (9 revised), 20 patients had a ultrasound score of 2 (15 revised), 7 patients had a ultrasound score of 3 (6 revised); 44 patients had Cr value < 3 ppb (5 revised), 28 patients had Cr value <3 ppb<7 (6 revised), 34 patients had Cr value <7 ppb (32 revised), 25 patients had Co value < 3 ppb (5 revised), 20 patients had Co value <3 ppb<7 (1 revised), 61 patients had Co value > 3 ppb (37 revised). A positive correlation between blood metal ions values and ultrasound levels (p<0,001) and a statistically significant interaction between ultrasound score and indication to revision (p=0,037) were found. Discussion and Conclusion. As reported in literature also in our experience the ASR XL implant was afflicted by an excessive revision rate, associated with levels of metal ions significantly higher than other hip bearing surfaces. Our results demonstrate a positive correlation between blood Cr and Co levels and the amount of fluid collection: at higher levels of fluid collection correspond higher levels of blood metal ions. Since statistical analysis confirmed that the level of ultrasound score is correlated with indication to revision it is suggested to use ultrasounds, if the score is 2 or more, as parameter to revise MoM implants even in absence of pathologic blood ions levels

The prevalence of pseudotumours in patients with large-head metal-on-metal (MOM) THA has been the subject of implant recalls and warnings from various regulatory agencies. To date, there is no consensus on whether ultrasound or MRI is superior for the detection of pseudotumours. Ultrasound is relatively cheap but can be operator dependent. MARS MRI has the advantage of excellent visibility of the soft tissue. However MRI comes at a marked increase cost and takes about twice as long to perform. At our institution we prospectively compared ultrasound to MRI for pseudotumour detection in an asymptomatic cohort of patients with MOM THAs. Methods. We enrolled 40 patients with large-head MOM THAs in the study. The mean age was 54 years (range, 34–76 years). The mean time from surgery was 54 months (range, 40–81 months). There were 28 men and 12 women. All patients underwent ultrasound and MRI using slice encoding for metal artifact correction. The gold standard was defined as follows: if both ultrasound and MRI agreed, this was interpreted as concordant and the result was considered accurate. Results. Ultrasound and MRI agreed in 37 of 40 patients (93%). The prevalence of pseudotumours was 31% (12 of 39) in our cohort. Twenty-three of 39 patients (59%) had completely normal tests and four (10%) had simple fluid collections. Ultrasound had a sensitivity of 100% and specificity of 96% while MRI had a sensitivity of 92% and specificity of 100%

Percutaneous fixation of scaphoid fractures has become popular in recent years, mainly due to its reduced complexity compared to open surgical approaches. Fluoroscopy is currently used as guidance for this percutaneous approach, however, as a projective imaging modality, it provides only a 2D view of the complex 3D anatomy of the wrist during surgery, and exposes both patient and physician to harmful X-ray radiation. To avoid these drawbacks, 3D ultrasound has been suggested to provide imaging for guidance as a widely available, real-time, radiation-free and low-cost modality. However, the blurred, disconnected, weak and noisy bone responses render interpretation of the US data difficult so far. In this work, we present the integration of 3D ultrasound with a statistical wrist model to allow development of an improved ultrasound-based guidance procedure. For enhancement of bone responses in ultrasound, a phase symmetry based approach is used to exploit the symmetry of the ultrasound signal around the expected bone location. We propose an improved estimation of the local phase symmetry by using the local spectrum variation of the ultrasound image. The statistical wrist model is developed through a group-wise registration based framework in order to capture the major modes of shape and pose variations across 30 subjects at different wrist positions. Finally, the statistical wrist model is registered to the enhanced ultrasound bone surfaces using a probabilistic registration approach. Feasibility experiments are performed using two volunteer wrists, and the results are promising and warrant further development and validation to enable ultrasound guided percutaneous scaphoid fracture reduction

Improving the accuracy of measuring 6 degree of freedom tibiofemoral kinematics is a crucial step in gait analysis, but skin-marker estimated kinematics are subject to soft tissue artefacts. Fluoroscopic systems have been reported to achieve high accurate kinematics, but their induced irradiation, limited field of view, and high cost hampers routine usage on large patient cohorts. The aim of this study is to assess the feasibility of measuring tibiofemoral kinematics using multi-channel A-mode ultrasound system in cadaver experiment and to assess its achievable accuracy. A full cadaver was placed with its back on a surgery table while its legs were overhanging the edge of the table. Upper body was fixated and right leg was moved by means of pulling a rope. Two bone pins with optical markers were mounted to the femur and tibia separately to measure the ground truth of motion. Six custom holders containing 30 A-mode ultrasound transducers and 18 optical markers were mounted to six anatomical regions. By measuring the bone to ultrasound transducer distance and using the spatial information of the optical markers on the holders, 30 bone surface points were determined. The corresponding bones (femur and tibia) were registered to these acquired points after which the tibiofemoral kinematics were determined. This study presents a multi-channel A-mode ultrasound system and the first results have shown its feasibility of reconstructing tibiofemoral kinematics in cadaver experiment. Although the reconstructed tibiofemoral kinematics is less accurate than a fluoroscopic system, it outperforms a skin-mounted markers system. Thus, this A-mode Ultrasound approach could provide a non-invasive and non-radiative method for measuring tibiofemoral kinematics, which may be used in clinic gait analysis or even computer-aided orthopaedic surgery

Aim. The present study aimed to assess the accuracy of preoperative departmental ultrasound scans in identifying rotator cuff tears at our institution. Methods. Preoperative ultrasound scan reports were obtained from 64 consecutive patients who subsequently underwent arthroscopic subacromial decompression and/or rotator cuff repair. Data was collected retrospectively using our 2010 database. The ultrasound reports were compared with the arthroscopic findings. The presence or absence of partial and full thickness rotator cuff tears was recorded. Results. Ultrasound correctly identified 30/43 (70%) of all tears, 18/30 (60%) of full thickness tears but only 1/13 (8%) of partial tears seen at arthroscopy. Of the remaining 12 partial tears seen at surgery, 6 were misdiagnosed as full thickness tears on ultrasound and 6 were not picked up at all. Five partial thickness tears were repaired and the rest were debrided. If both full and partial thickness tears are counted as true positives, ultrasound had a sensitivity of 70%, a specificity of 67%, a positive predictive value of 81%, a negative predictive value of 51% and an overall accuracy of 69%. If only partial tears are counted as true positives sensitivity decreases to 8% and positive predictive value to 10%. Conclusion. In this series a preoperative departmental ultrasound scan identified 70% of the actual rotator cuff tears present at arthroscopy. However ultrasound was not accurate in identifying partial thickness tears or distinguishing them from full thickness defects. Due to this relatively low sensitivity, we question the usefulness of routine preoperative departmental ultrasound scans in the evaluation of suspected cuff tears

If the lower re-rupture in operative treated patients was an effect of tendon-end apposition, then patients in whom that could be demonstrated in equinus by ultrasound could be equally well treated non-operatively without the attendant surgical risk. All patients undergoing ultrasound for a suspected Achilles tendon repair between January 2000-2005 were included. Patients with a residual gap, 5mm or more in equinus; were treated by surgical repair. Those with a gap of less than 5mm were treated non-operatively. We excluded patients with no rupture, partial rupture and musculo-tendinuous junction (MTJ) tears. We recorded the following: clinical findings, ultrasound measurements of tendon gap in neutral and equinus, distance of rupture from distal insertion, the treatment and complications. All patients were followed up to a minimum of 6 months. 156 patients were treated for a clinical Achilles tendon rupture during the study period. We excluded 5 patients with no rupture on ultrasound, 15 with a MTJ tear, 7 with a muscle tear and 4 patients did not follow the protocol. 125 patients comprising 88 males and 37 females were entered into the study. 67 patients were treated operatively (37 open, 30 percutaneous) and 58 non-operatively. There was no significant difference between the 2 groups with respect to age, sex and injury mechanism. Two patients in the non-operative group had a re-rupture (3.4%) compared with 1 (1.5%) in the non-operative group. There were 2 incidences of superficial wound infection and 2 of temporary dorsal foot numbness in the operative. One patient in the non-operative group had a DVT. There was no significant difference for any of the complications between the two groups. It may be possible to reduce the risk of re-rupture and surgery using dynamic ultrasound to determine which treatment the patient receives

Introduction. In this work, we present the first real-time fully automatic system for reconstruction of patient-specific 3D knee bones models using ultrasound raw RF data. The system was experimented on two cadaveric knees, and reconstruction accuracy of 2 mm was achieved. Methods. To use the highest available contrast and spatial resolution in the ultrasound data, the raw RF signals were used directly to automatically extract the bone contours from the ultrasound scans. Figure 1 shows a sample ultrasound B-mode image for cadaver's distal femur, showing some of the scan lines raw RF signals as well as the final extracted contour using our method. An ultrasound machine (SonixRP, Ultrasonix Inc) was used to scan the knee joint and the RF data of the scans are acquired by custom-built (using Visual C++) software running on the ultrasound machine. An optical tracker (Polaris Spectra, Northern Digital Inc) was attached to the ultrasound probe to track its motion while being used in scanning. The scanning of the knee was performed at two flexion angles (full extension, and deep knee bend). At each position, the knee was fixed in order to collect scans that represent a partial surface of the bone (which will be later mutually registered to represent the whole bone's surface). Figure 4 shows fluoroscopy images of a patient's knee, showing the different articulating surfaces of the knee bones visible to the ultrasound at different flexion angles. Figure 5 shows a dissected cadaver's knee showing the articulating surfaces visible to ultrasound at 90 degrees flexion. The custom-built software collects the RF data synchronized with the probe tracking data for each ultrasound frame. Each frame of the RF data is then processed to extract the bone contour. The bone contours are automatically extracted from the RF data frame with frame rate of 25 frames per second. Figure 2 shows a flowchart for the contour extraction process. The extracted bone contours were then used by the our software, along with the ultrasound probe's tracking data, to reconstruct point clouds representing the bones' surfaces. These point clouds were then aligned to the mean model of the bone's atlas using ICP and integrated together to form 3D point cloud of the bone's surface. A 3D model of the bone is then reconstructed by morphing the mean model to match the point cloud. Figure 3 shows a flowchart for the point cloud and 3D model reconstruction process. Results. The developed system was tested on two cadavers' knees. The cadavers' knees were CT-scanned and manually segmented. The reconstructed models using ultrasound were then compared to the segmented models. An average error of 2 mm was achieved. Figure 6 shows sample ultrasound RF signals, and their processed version and the extracted bone echoes. Figure 7 shows sample ultrasound frames and the extracted bone contours from them. Figure 8 shows the reconstructed point clouds and 3D models for two distal femurs and a proximal tibia

Postero-lateral rotator instability (PLRI) is the most common pattern of recurrent elbow instability. Unfortunately, current imaging to aid PLRI diagnosis is limited. We have developed an ultrasound (US) technique to measure ulnohumeral joint gap with and without stress of the lateral ulnocollateral ligament. We sought to define lateral ulnohumeral joint gap measurements in the resting and stressed state to provide insight into how US may aid diagnosis of PLRI. Sixteen elbows were evaluated in eight healthy volunteers. Lateral ulnohumeral gap was measured on US in the resting position and with posterolateral drawer stress test maneuver applied. Joint laxity was calculated as the difference between stress and rest conditions. Measurements were performed by two independent readers with comparison performed between stress and rest positions. A highly significant difference in ulnohumeral gap was seen between stress and rest conditions (Reader 1: p < 0 .0001 and Reader 2: p=0.0002) with median values of 2.93 mm and 2.50 mm at rest and 3.92 mm and 3.40 mm at stress for Reader 1 and 2 respectively. Median joint laxity was 1.02 mm and 0.74 mm respectively for each reader. Correlation and agreement between readers was good. This study provides key new insight into use of US for diagnosis as PLRI as it defines normal ulnohumeral distances and demonstrates widening when applying the posterolateral drawer stress maneuver. Further evaluation of this technique is required in patients with PLRI

This study evaluates high power low frequency ultrasound transmitted via a flat vibrating probe tip as an alternative technology for meniscal debridement in the knee. A limitation of this technology is thermal damage in residual meniscal tissue. To compare tissue removal rate and thermal damage for a radiofrequency ablation device and an experimental ultrasound ablation device. Twelve bovine meniscal specimens were treated in an identical fashion with (a) a 3.75mm 50° bipolar radiofrequency wand, Arthrocare Super Multivac 50 Arthrowand (Arthrocare Corporation, Sunnyvale, CA), operated in a free-hand manner in accordance with manufacturers instructions (n=6), and (b) an experimental flat-tipped 3mm 20kHz ultrasound probe, suspended vertically in a 500N force-controlled experimental rig (n=6). Tissue removal rate (TRR), zone of thermal necrosis and zone of thermal alteration were calculated. Histological sections were prepared for each sample (H&E). Independent samples t-test was used to compare TRR, zone of thermal necrosis and zone of thermal alteration. Statistical analysis was performed using PASW Statistics (v.18, IBM SPSS Statistics, Chicago, IL, U.S.A.). The mean TRR for meniscal debridement by the radiofrequency device was 5.59±1.1mg/s. This compared with a mean TRR of 4.74±1.4mg/s for debridement with the ultrasound device at settings (p=0.259, NS). Mean depth of tissue removal using the radiofrequency device was 2.21±0.26mm compared to 3.75±0.25mm (p< 0.001, ?. 2. =0.09). Using the radiofrequency device, the mean depth of zone of thermal alteration was 1282±436µm, compared with 710±251µm for the force-controlled ultrasound device (p=0.29, ?. 2. =0.42). For the radiofrequency device, the mean depth of zone of thermal necrosis was 64±41µm versus 97±44µm for the ultrasound device (p=0.239, NS). We observed a trend towards an increased zone of thermal necrosis and a reduced zone of thermal alteration for the ultrasound device, when compared with the radiofrequency device. Ultrasonic debridement shows comparable thermal damage to existing radiofrequency meniscal debridement technology

A challenging problem in ultrasound based orthopaedic surgery is the identification and interpretation of bone surfaces. Recently we have proposed a new fully automatic ultrasound bone surface enhancement filter in the context of spine interventions. The method is based on the use of a Gradient Energy Tensor filter to construct a new feature enhancement metric, which we call the Local Phase Tensor. The goal of this study is to provide further improvements to the proposed filtering method by incorporating a-priori knowledge about the physics of ultrasound imaging and salient grouping of enhanced bone features. Typical ultrasound scan of the spine, there is a large soft tissue interface present close to the transducer surface with high intensity values similar to those of the bone anatomy response. Typical ultrasound image segmentation or enhancement methods will be affected by this thick soft tissue response. In order to weaken this soft tissue interface we calculate a new transmission map where features deeper in the ultrasound image have higher transmission values and shallow features have lower transmission values. The calculation of this new US transmission/attenuation map allows the proposed image enhancement method to mask out erroneous regions, such as the soft tissue interface, and improve the accuracy and robustness of the spine surface enhancement. The masked US images were used as an input to the LPT image enhancement method. In order to provide a more compact spine surface representation and further reduce the typical US imaging artifacts and soft tissue interfaces we calculate saliency Local Phase Tensor features. The saliency images are computed using Difference of Gaussian filters. Qualitative results, obtained from in vivo clinical scans, show a strong correspondence between enhanced features and the actual bone surfaces present in the ultrasound scans. Future work will include the extension of the proposed method to 3D and validation of the method in the context of intra-operative ultrasound image registration in CAOS applications

Background. Ultrasound and MRI are recommended tools in evaluating postoperative pain in metal-on-metal hip (MoM) arthroplasty. Aim. To retrospectively compare MRI and ultrasound results of the hip with histopathology results in failed (MoM) hip arthroplasty. Methods. 25 hips (16 patients) who underwent revision hip surgery for painful (MoM) hip replacement/resurfacing were included in this study (March 2011 to May 2012). Average age 50.4 yrs (37–69y). Blood test for cobalt and chromium levels, ultrasound and MRI were done prior to revision surgery. 23 hips had ultrasound scan. 21 of these hips also had MRI scan prior to surgery. Scans were done at an average of 50 months from primary metal-on-metal surgery. All the ultrasound & MRI were done and reported by a single musculo-skeletal radiologist. During surgery multiple tissue samples were taken from acetabulum, capsule as well as tissue surrounding the femoral neck and sent for histopathology. 21 hip histopathology results were positive for metalosis. 2 hip histopathology results were negative for metalosis. Metalosis as defined by our histopathologist as that which is showing the presence of sheets of macrophages with dark brown pigmentation in their cytoplasm under polarized light. Results. Ultrasound examination was positive for fluid collection in 18 (78.2%). MRI was positive in 16 (76.1%). 4 patients (19%) had negative ultrasound and MRI results but were revised due to pain and were found to have histopathology positive metalosis. One patient had ultrasound positive for fluid collection with negative MRI. One patient was MRI positive for fluid but normal ultrasound findings. Conclusion. Although ultrasound and MRI are useful in screening of MoM patients still there are a significant percentage of hips, which failed with negative radiology findings