The clinical and radiological results of 50 consecutive acetabular reconstructions in 48 patients using impaction grafting have been retrospectively reviewed. A 1:1 mixture of frozen, ground irradiated bone graft and Apapore 60, a synthetic bone graft substitute, was used in all cases. There were 13 complex primary and 37 revision procedures with a mean follow-up of five years (3.4 to 7.6). The clinical survival rate was 100%, with improvements in the mean Harris Hip Scores for pain and function. Radiologically, 30 acetabular grafts showed evidence of incorporation, ten had radiolucent lines and two acetabular components migrated initially before stabilising.

Acetabular reconstruction in both primary and revision surgery using a 1:1 mixture of frozen, ground, irriadiated bone and Apapore 60 appears to be a reliable method of managing acetabular defects. Longer follow-up will be required to establish whether this technique is as effective as using fresh-frozen allograft.

Loss of bone stock resulting from wear particle-induced osteolysis may compromise the stability and osteoin-tegration of arthroplasty implants. Usually allogeneic corticocancellous bone is used around an implant to fill the defects, but because of the safety and availability of these grafts, the use of synthetic substitute of bone is becoming everyday frequently. BoneSave™ is an osteo-conductive biomaterial prevalently used in reconstructive surgery but it can be used to fill every bone defects or in traumatology like adjuvant of an osteosynthesis. The particles of BoneSave™ (2–4 mm or 4–6 mm) are made of tricalcium phosphate 80% and hydroxyapatite 20%, they have a superficial porosity of 50% (range 10–400 mm). Usually the osteointegration happens after 2–3 years. Recently studies have described that the mixture of 80% TCP/20% HA with human mesenchymal stem cells induced bone formation in vivo faster than the other formulations of the same elements, In vitro studies also demonstrated the expression of osteocalcin. The mixture of TCP/HA with bone-marrow aspiration could be useful if human stem cells are not available. Orthopaedic and traumatology cases will be shown where the use of Bone-Save™ has lead to good clinical and radiological results after a follow-up of 24 months

Aims

Calcium sulphate has traditionally been used as a filler of dead space arising during surgery. Various complications have been described following the use of Stimulan bio-absorbable calcium sulphate beads. This study is a prospective observational study to assess the safety profile of these beads when used in revision arthroplasty, comparing the complication rates with those reported in the literature.

Critical-sized bone defects remain challenging in the clinical setting. Autologous bone grafting remains preferred by clinicians. However, the use of autologous tissue is associated with donor-site morbidity and limited accessibility to the graft tissue. Advances in the development of synthetic bone substitutes focus on improving their osteoinductive properties. Whereas osteoinductivity has been demonstrated with ceramics, it is still a challenge in case of polymeric composites. One of the approaches to improve the regenerative properties of biomaterials, without changing their synthetic character, is the addition of inorganic ions with known osteogenic and angiogenic properties. We have previously reported that the use of a bioactive composite with high ceramic content composed of poly(ethyleneoxide terephthalate)/poly(butylene terephthalate) (1000PEOT70PBT30, PolyActive, PA) and 50% beta-tricalcium phosphate (β-TCP) with the addition of zinc in a form of a coating of the TCP particles can enhance the osteogenic differentiation of human mesenchymal stromal cells (hMSCs) (3). To further support the regenerative properties of these scaffolds, inorganic ions with known angiogenic properties, copper or cobalt, were added to the coating solution. β-TCP particles were immersed in a zinc and copper or zinc and cobalt solution with a concentration of 15 or 45 mM. 3D porous scaffolds composed of 1000PEOT70PBT30 and pure or coated β-TCP were additively manufactured by 3D fibre deposition. The osteogenic and angiogenic properties of the fabricated scaffolds were tested in vitro through culture with hMSCs and human umbilical vein endothelial cells, respectively. The materials were further evaluated through ectopic implantation in an in vivo mini-pig model. The early expression of relevant osteogenic gene markers (collagen-1, osteocalcin) of hMSCs was upregulated in the presence of lower concentration of inorganic ions. Further analysis will focus on the evaluation of ectopic bone formation and vascularisation of these scaffolds after implantation in a mini-pig ectopic intramuscular model

Aim. The demand for a synthetic bone substitute that can build bone and at the same time kill bacteria is high. The aim of this study was to compare the elution of gentamicin from a new synthetic bone substitute in vitro with the performance in clinical applications. Method. Gentamicin release was measured from a synthetic bone graft substitute, comparing in vitro and clinical conditions:. 1). elution in Ringers solution. The bone graft substitute contained 175mg gentamicin per 10mL. The material was introduced either as paste or as pre-set beads with a high or low surface areas, >100cm. 2. and 24cm. 2. respectively. The gentamycin release was measured by daily collection of samples. 2). elution in patients treated for trochanteric hip fractures(n=6) or uncemented hip revisions(n=5) 7,3±1,1mL of substitute was implanted and drainage was collected at 6h,12h,24h,30h,36h post-op. Blood serum was collected every hour for the first 6h and thereafter every 6h until 4 days post-op, urine – daily for the first 7 days post-op. 3). elution in patients treated after bone tumor resection(n=8), 12,1±5,5mL of substitute was implanted and both drainage and blood serum were collected daily until 2 days post-op. Gentamicin concentrations were analyzed using antibody technique. Results. In the in vitro study, there was an initial peak in the gentamicin concentration (GC) for all the samples and at a level above 4mg/L, which is the MIC break point, during the whole test period of 28 days. All gentamicin was released during the test period and more than 95 % had been released after 2–4 days independently of the surface area of the material, or if it was pre-set or paste. In the clinical studies similar results were found. Gentamicin was detected in the drainage until 2 days post-op. and the hip patients 40% less GC – compared to the tumor patients. In the blood serum with higher GC in the tumor patients and non-detectable levels after 2 days post-op for the hip patients. The GC was significantly lower than maximum systemic level recommended of 12 mg/L. In the urine, GC was above the MIC of 4mg/L for the first seven days post-op. Conclusions. A reliable in vitro test method has been identified for the future development of additional new and effective antibiotic containing bone substitutes. The new bone regenerating carrier gives very high local antibiotic release for a controlled short time after surgery and high systemic serum concentrations are avoided

Background. For bone grafting procedures, the use of autologous bone is considered the gold standard, as it is has a better healing capacity compared to other alternatives as allograft and synthetic bone substitutes. However, as there are several drawbacks related to autografting (infection, nerve- or vascular damage, chronic pain problems, abdominal herniation), there has been a targeted effort to improve the healing capacities of synthetic bone substitutes. Aim. To evaluate the performance of a carbonated osteoionductive hydroxyapatite (CHA) scaffold of clinical relevant size (Ø=15mm, H=50mm) in a sheep model of multi level posterolateral intertransverse lumbar spine fusion after activation with autologous bone marrow nuclear cells (BMNC) in a flow perfusion bioreactor. Method. Two groups were included in the study, autograft (n=6) and CHA scaffold (n=6) CHA. A paired design was used between and within the groups as lumbar posterolateral arthrodesis was performed in sheep on two levels (L2-L3, L5-L6) +/− BMNC, respectively. Before implantation, the CHA scaffold was cultured in a flow perfusion bioreactor system with BMNC for 21 days, and the autograft group was supplemented with isolated BMNC during the procedure. Micro tomography was used to evaluate fusion rate and the microarchitectural properties of the explants after an observation period of four months. Results. In the autograft group, the healing rate was 83.3% irrespective of the presence BMNC, and in the CHA group, 66.7% fused in the presence of BMNC, and 33.3% without. The microarchitectural data suggested the autograft group to be superior to the CHA scaffold regarding mechanical properties, however porosity decreased significantly (p=0.001) in the CHA scaffold group suggesting deposition of mineralized bone matrix. Conclusion. Based on the fusion rate and micro architectural properties, we consider the CHA scaffold fully capable of new bone formation, and that the presence of BMNC has a positive effect on the fusion rate in a challenging model of bone healing

Fibular hemimelia is associated with equinovalgus deformity of the ankle and hind foot and antero-medial bowing of tibia. A wedge shaped distal epiphysis of the tibia and tight posterolateral soft tissues play an important role in the pathogenesis of ankle valgus and lateral subluxation of foot. Tethering effect of fibular anlage may contribute to the deformities in the tibia and ankle. Lengthening procedures are associated with progression of these deformities. The purpose of this study is to determine whether Exner Osteotomy and Excision of Fibular anlage will correct the valgus deformity of the ankle and antero-medial bowing of tibia. A bending osteotomy through the distal tibial physis as described by Exner and excision of Fibular Anlage was performed in six limbs in five children (4 boys, 1 girl) with fibular hemimelia. Histology of Excised Fibular anlage was studied under light microscopy. The mean age at the time of surgery was twenty two months (range: 8 months to 5 years). The mean follow-up was two years and two months (13 months to 4 years and 8 months). Full Correction of ankle valgus and tibial bowing was achieved in three feet where, a cortical strut graft was used in the open wedge osteotomy. In two feet synthetic bone substitute was used. In these, tibial bowing corrected but slight ankle valgus remained. In one foot where synthetic bone substitute was used and the postoperative compliance with AFO was poor, bowing of tibia improved but ankle valgus recurred. Premature fusion of growth plate did not occur in any of the cases. Histology of fibular anlage showed replacement of bone tissue by mature collagen bundles surrounded by fibroconnective tissue. Exner Osteotomy and Excision of Fibular Anlage in Fibular Hemimelia corrects the ankle valgus and antero-medial bowing of tibia

We describe the treatment by subperiosteal resection of an aneurysmal bone cyst in the distal fibula in eight patients and highlight the role of the periosteum in the regeneration of bone defects. The mean age of the patients was 13.5 years (12 to 17). Seven had an open growth plate. The mean size of the resected specimen was 5.12 cm (3.5 to 8.0). None of the patients received instillation of bone marrow, autogenous bone graft, allograft or any synthetic bone substitutes. All had complete regeneration of the bone defect within three to nine months, with no joint instability or recurrence. The mean length of follow-up was 11.5 years (2 to 18). At the final follow-up there was no difference in the range of movement, alignment or stability of the ankle when compared with the opposite side. The periosteum played a major role in the complete filling of the bone defects and avoided the morbidity of other techniques

Bone allograft is the most widely accepted approach in treating patients suffering from large segmental bone defect regardless of the advancement of synthetic bone substitutes. However, the long-term complications of allograft application in term of delayed union and nonunion were reported due to the stringent sterilization process. Our previous studies demonstrated that the incorporation of magnesium ions (Mg2+) into biomaterials could significantly promote the gene up-regulation of osteoblasts and new bone formation in animal model. Hence, our group has proposed to establish an Mg2+ enriched tissue microenvironment onto bone allograft so as to enhance the bone healing. The decellularization and gamma irradiation process were performed on bovine bone allograft and followed by magnesium plasma treatment. To evaluate the biocompatibility and bioactivity, materials characterizations, in vitro and in vivo studies were conducted, respectively. Mg composite layer on bone surface ranged from 500nm to ∼800nm thick. The cell viability on magnesium enriched allograft was significantly higher than that of the control. The ALP gene expression of hTMSCs in the group of PIII&D treated samples was highly up-regulated. The bone regeneration ability of Mg modified bone allograft implanted in animal model was significantly superior than the control after 2-month post-operation

Cervical and lumbar spine fusion procedures are increasing every year. Nonetheless, these procedures are associated with high infection rates, resulting in additional cost burden. The conundrum of achieving efficient spinal fusions with minimum complications requires an ideal bone graft with osteoconductive, osteoinductive, osteogenic and structural characteristics. Synthetic bone graft substitutes with or without autograft, allograft or synthetic bone substitutes have been commonly used for fusion procedures. We carried out a meta-analysis of comparative studies and prospective case series (n = 29) with cervical and lumbar fusion procedures using synthetic bone graft substitutes, autograft or allograft and other biologics. Synthetic bone graft substitutes analysed included HA (Hydroxyapatite), β-TPC (Tri Calcium Phosphate), β-TSC (Tri Calcium Sulfate), PMMA (Polymethylmetacrylate), Surgibone, BOP (Biocompatible Osteoconductive Polymer). The analysis revealed suboptimal evidence for the efficacy and safety of synthetic products used in spinal fusion procedures. Further studies are needed to determine beneficial effects of synthetic substitutes. However, the infection rate could be highly decreased with surface and composition modification of widely used polyether ether ketone (PEEK) implants. Laser modification of surface characteristics and collagen fleeces with micro and nano pore structures can prove to be excellent surface for increased osteoblasts cell proliferation and vitality

A spine compression fracture is a very common form of fracture in elderly with osteoporosis. Injection of polymethyl methacrylate (PMMA) to fracture sites is a minimally invasive surgical treatment, but PMMA has considerable clinical risks. We develop a novel type thermoplastic injectable bone substitute contains the proprietary composites of synthetic ceramic bone substitute and absorbable thermoplastic polymer. We used thermoplastic biocompatible polymers Polycaproactone (PCL) to encapsulate calcium-based bone substitutes hydroxyapatite (Ca10(PO4)6(OH)2, HA) and tricalcium phosphate (TCP) to form a biodegradable injectable bone composite material. The space occupation ration PCL:HA/TCP is 1:9. After heating process, it can be injected to fracture site by specific instrument and then self-setting to immediate reinforce the vertebral body. The thermoplastic injection bone substitute can obtain good injection properties after being heated by a heater at 90˚C for three minutes, and has good anti-washout property when injected into normal saline at 37˚C. After three minutes, solidification is achieved. Mechanical properties were assessed using the material compression test system and the mechanical support close to the vertebral spongy bone. In vitro cytotoxicity MTT assay (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) was performed and no cell cytotoxicity was observed. In vivo study with three New Zealand rabbits was performed, well bone growth into bone substitute was observed and can maintain good mechanical support after three months implantation. The novel type thermoplastic injection bone substitute can achieve (a) adequate injectability and viscosity without the risk of cement leakage; (b) adequate mechanical strength for immediate reinforcement and prevent adjacent fracture; (c) adequate porosity for new bone ingrowth; (e) biodegradability. It could be developed as a new option for treating vertebral compression fractures

Endoprosthetic reconstruction for pathologic acetabular fractures is associated with a high risk of periprosthetic joint infection. In this setting, bone defect reconstruction utilising co-delivery of a synthetic bone substitute with an antibiotic, is an attractive treatment option from both, therapeutic and prophylactic perspective. We wished to address some concerns that remain regarding the possible presence of potentially wear inducing particles in the periprosthetic joint space subsequent to this procedure. We analysed a drain fluid sample from an endoprosthetic reconstruction of a pathologic acetabular fracture with implantation of a gentamicin eluting, biphasic bone graft substitute, consisting of 40% hydroxyapatite (HA) and 60% calcium sulphate (CERAMENT G), into the residual peri-acetabular bone defect. This sample was divided into two 1.5ml subsamples, to one of which 100mg HA particles were added as control before burning off all organic substance at very high temperature. These heat treated samples were then examined with scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDAX) and compared to a reference sample consisting of HA particles only. On SEM, hydroxyapatite particles were readily recognisable in the control and reference samples, whereas only very few particles over 2μm were apparent in the ”pure” drain sample. EDAX revealed that very large amounts of salts were present in both drainage samples. The pure drainage sample however, contained markedly lower amounts of calcium and phosphate compared to reference and control samples. No HA particles as such, were seen in the pure sample, however their presence cannot be excluded with absolute certainty, as some particles might have been hidden within the large salt conglomerates. We could not find clear evidence that the drain fluid really contained HA particles. More thorough investigations are needed and future analyses with prior removal of the high salt content would likely yield more conclusive results

Synthetic bone substitutes provide an alternative to autograft but do not give equivalent clinical results. Their performance may be enhanced by adding osteogenic growth factors. In this study, TGFβ1 was absorbed on to a carrier of β tricalcium phosphate and Gelfoam® and used to fill a defect around a tibial implant in a rat model of revision arthoplasty. We added 0.0, 0.02 μg, 0.1 μg or 1.0 μg of TGFβ1 to the carrier and then implanted it around an hydroxyapatite-coated stainless-steel pin in the proximal tibia of rats. The tibiae were harvested at three, six or 26 weeks and the amount of bone formation and ceramic resorption were assessed. TGFβ1 had no effect on the amount of bone in the defect, the amount of fluorescent label incorporated or the rate of mineral apposition. The growth factor did not significantly affect the amount of β TCP remaining in the tissue at any of the time points

Background: Several recent studies have compared incorporation of autograft with that of allograft or synthetic bone substitutes in anterior cervical discectomy and fusion (ACDF). These studies have almost universally relied on plain radiography to assess bone incorporation despite the fact that we know, from similar lumbar spine studies, that bone ingrowth is over-estimated. Our aim was to determine the exactly whether bone incorporation may be correctly assessed by this method by comparing the results to those obtained by spiral CT imaging. Methods: 15 patients underwent ACDF. Helical CT scans were obtained. Fusion was defined as trabecular continuity across the disc space anterior, through and posterior to the cage proximally and distally and assessed by two of the authors independently. Results: 14 of the 15 patients appeared to have solid incorporation of bone graft/substitute on plain radiography, 19 out of 20 cages. These findings were not however replicated on CT imaging. The autograft was not considered to have been incorporated proximally above the cage in 5 cases and distally in 6 cases. Discussion: The implication of our results is that there is at least a false positive rate of bone incorporation of 20–25%. Pseudarthroses are generally painful and therefore we would recommend that spiral CT imaging is performed in patients who have ongoing pain following ACDF. Ethics approval: COREC Ethics committee number 06/S1104/34. Interest Statement: None of the authors have received any grants to carry out this research

Intraosseous schwannoma is a rare benign neoplasm, which most commonly arises in the head and neck region particularly the mandible, due to the long intraosseous path of sensory nerves in the mandible. We present a 27-year-old lady with an unusual presentation of an intraosseous schwannoma of the first metatarsal. There is only one report published previously of an intraossous schwannoma of the lesser metatarsal bone of the foot. A 27-year-old woman presented with painful left forefoot following a trip while walking. Plain radiographs demonstrated a pathological fracture through a lytic lesion of the first metatarsal of the left foot. MRI scan using axial T1-weighted spin echo and axial and sagittal T2-weighted gradient echo showed an amorphous mass occupying the medulla of the bone but with a breach of the plantar aspect of cortex with apparent localised destruction. Ultrasound-guided biopsy was performed. Haematoxylin and Eosin stained specimen sections showed a proliferation of spindle cells of alternating hypercellularity and hypocellularity. This case was managed by curettage and grafting with autograft and synthetic bone substitute. At two-year follow-up, the radiographs showed complete graft incorporation and a healed cyst. The patient was clinically asymptomatic with return of full functions. There were no clinico-radiological findings to suggest any recurrence. Due to rarity and non-specific clinico-radiological features, this case illustrates the necessity of a multi-disciplinary approach with an accurate histological diagnosis in combination with radiological and clinical appearances

Distal radial fractures are amongst the most common trauma referrals, however controversy remains regarding their optimum management. We undertook a retrospective review of the management of distal radial fractures in our department. The prospectively maintained trauma database was used to identify patients admitted for operative management of a dorsally displaced distal radial fracture between June 2008 and June 2009. Only extra-articular or simple intra-articular fractures were included (AO classification A2/A3/C1/C2). Operation notes were reviewed to determine the method of fixation. Patients were contacted by post and asked to complete a functional outcome score - Disabilities of the Arm, Shoulder and Hand (DASH). A further 12 patients with similar fractures who had been managed conservatively were also asked to complete a DASH score to provide a comparison between operative and non-operative management. 98 patients were identified - 67 female, 31 male. Mean age was 51 years, range 15-85 years. All patients were at least 1 year post-op. 26 patients had manipulation under anaesthesia (MUA). 48 patients had MUA and K-wire fixation, which was supplemented with synthetic bone substitute in 16 cases. 3 patients had MUA and bone graft and 21 patients had open reduction and internal fixation (ORIF) with a volar plate. 34 correctly completed DASH scores were returned. A lower score equates to a better functional outcome. Mean DASH scores were: MUA 14.8; MUA+K-wire 13.1; ORIF 13.6; conservative 47.1. This data would indicate that patients with a significantly displaced distal radial fracture have a better functional outcome with operative management to improve the fracture alignment. However, all of the methods of fixation used resulted in similar functional outcomes at one year

Introduction: This research aims to study the efficacy and effect of Bone Marrow Stromal Stem Cell (BMSSC) implantation on healing of refractory fracture non-union. Methods: Approved by the local Ethics Committee, twelve patients (9M and 3F), age range 38 to 76 years (mean 49.9) with non-union resistant to multiple previous attempts of treatment (mean 3.75 procedures) were treated. Four tibial and eight femoral non-union. The patients were admitted for harvesting of stromal stem cells by bone marrow aspiration from the iliac bone. BMSSC were expanded in tissue cultures for three weeks to an average of 5 x 10. 6. cells. After successful culture the non-union site underwent decortication and BMSSC added to synthetic bone substitute (different types) on one side of the fracture (medial or lateral) according to randomisation. The side of treatment was blinded to patient, surgeons and radiologist. Standard radiographs were taken and evaluated independently by three experienced musculoskeletal radiologists. The extent of callus formation on each side was recorded. In equivocal cases computerized tomography (CT) was also obtained. Results: No patient developed systemic complications related to the procedure. On follow-up callus formation was present in 9 of 12 patients. Callus was more marked on the cell implantation side in 6/12 patients (50%), control side in 1/12 (8.3%) and on both sides in 2 patients. 3 patients showed no change. Discussion: These findings suggest that implantation of BMSSC can enhance bone formation in persistent non-union. A larger randomized controlled trial will follow to test this new treatment

Among the wide variety of bone substitutes presently available, pure β-tricalcium phosphate ceramics have become available (Biosorb®; Aesculap, Tuttlingen). During the first 12 months of a prospective clinical trial, Biosorb® products were implanted in 21 patients. The ceramics were used in a variety of clinical settings, ranging from pelvic osteotomies in children (n=9), to filling of bone cysts or osseous defects (n=4), to dorsal spondylodesis (n=6), as well as for the grafting of pseudarthroses (n=2). Average follow-up period was 13 (6–18) months. The β-TCP granules, when used as part of a composite graft in combination with autologous bone, were completely resorbed after an average period of 14 weeks, while the cubes required 12 to 15 months. The more massive wedges have shown only a decrease in size and radio density. Due to the ability of the cubes and wedges to bear loads of up to 30 MPa, they were successfully implanted during pelvic osteotomies to augment or completely replace the bicortical grafts. Complications or foreign body reactions were not noted. The osseointegration was found to be favorable for all forms. In light of the problems associated with autologous and allogeneic grafts, the use of synthetic bone substitutes will continue to increase. The combination of complete resorption, lack of risk of infection, and load sharing ability make the β-tricalcium phosphate implants a valuable addition to the spectrum of bone replacement products presently available. Their use in pediatric orthopedics could help avoid donor site morbidity including contour changes or growth disturbances, while providing a more stable graft. During the first phase of a prospective clinical trial, we have come to the conclusion, that the β-tricalcium phosphate ceramics represent a real alternative to other bone substitutes

Aims

Isolated acetabular liner exchange with a highly crosslinked polyethylene (HXLPE) component is an option to address polyethylene wear and osteolysis following total hip arthroplasty (THA) in the presence of a well-fixed acetabular shell. The liner can be fixed either with the original locking mechanism or by being cemented within the acetabular component. Whether the method used for fixation of the HXLPE liner has any bearing on the long-term outcomes is still unclear.

Aims

Our objective was to conduct a systematic review and meta-analysis, to establish whether differences arise in clinical outcomes between autologous and synthetic bone grafts in the operative management of tibial plateau fractures.