We studied changes in
Graft-tunnel mismatch of the bone-patellar tendon-bone
(BPTB) graft is a major concern during anatomical anterior cruciate
ligament (ACL) reconstruction if the femoral tunnel is positioned
using a far medial portal technique, as the femoral tunnel tends
to be shorter compared with that positioned using a transtibial
portal technique. This study describes an accurate method of calculating
the ideal length of bone plugs of a BPTB graft required to avoid
graft–tunnel mismatch during anatomical ACL reconstruction using
a far medial portal technique of femoral tunnel positioning. Based on data obtained intra-operatively from 60 anatomical ACL
reconstruction procedures, we calculated the length of bone plugs
required in the BPTB graft to avoid graft–tunnel mismatch. When
this was prevented in all the 60 cases, we found that the mean length
of femoral bone plug that remained in contact with the interference
screw within the femoral tunnel was 14 mm (12 to 22) and the mean
length of tibial bone plug that remained in contact with the interference
screw within the tibial tunnel was 23 mm (18 to 28). These results
were used to validate theoretical formulae developed to predict
the required length of bone plugs in BPTB graft during anatomical
ACL reconstruction using a far medial portal technique. Cite this article:
Introduction. With an ongoing increase in total knee arthroplasty (TKA) procedural volume, there is an increased demand to improve surgical techniques to achieve ideal outcomes. Considerations of how to improve post-operative outcomes have included preservation of the infrapatellar fat pad (IPFP). Although this structure is commonly resected during TKA procedures, there is inconsistency in the literature and among surgeons regarding whether resection or preservation of the IPFP should be achieved. Additionally, information about how surgical handling of the IPFP influences outcomes is variable. Therefore, the purpose of this systematic review was to evaluate the influence of IPFP resection and preservation on post-operative flexion, pain, Insall-Salvati Ratio (ISR), Knee Society Score (KSS),
Introduction: Patellar crepitus (PC) has been reported in 13% of cruciatesubstituting total knee arthroplasty (TKA) patients resulting from synovial tissue impingement within the femoral component intercondylar box (IB). Patient factors, component design, and technical errors have been implicated in PC. We compared primary TKA patients with PC requiring surgery against matched controls to identify significant variables. Methods: The databases of 2 institutions were reviewed to identify patients requiring surgery for PC. A control group matched for age, sex, and BMI was identified. Patient charts and radiographs were reviewed. Statistical analysis was performed. Significant variables associated with patient anatomy, implant size and alignment were subsequently investigated in a computational model to evaluate tendofemoral contact. Results: Between 2002 and 2008, over 4000 primary TKAs were performed using the Press Fit Condylar Sigma (DePuy, Warsaw, Indiana) TKA. Of these, 59 knees developed PC requiring surgery. The mean time to presentation was 10.9 months. The incidence of PC correlated with greater number of previous surgeries (1.18 vs. 0.44, p= 0.002), decreased patellar button size (35.7 vs. 37.1mm, p=0.003), shorter
Introduction. Patellar crepitus and clunk are tendofemoral-related complications predominantly associated with posterior-stabilizing (PS) total knee arthroplasty (TKA) designs [1]. Contact between the quadriceps tendon and the femoral component can cause irritation, pain, and catching of soft-tissue within the intercondylar notch (ICN). While the incidence of tendofemoral-related pathologies has been documented for some primary TKA designs, literature describing revision TKA is sparse. Revision components require a larger boss resection to accommodate a constrained post-cam and stem/sleeve attachments, which elevates the entrance to the ICN, potentially increasing the risk of crepitus. The objective of this study was to evaluate tendofemoral contact in primary and revision TKA designs, including designs susceptible to crepitus, and newer designs which aim to address design features associated with crepitus. Methods. Six PS TKA designs were evaluated during deep knee bend using a computational model of the Kansas knee simulator (Figure 1). Prior work has demonstrated that tendofemoral contact predictions from this model can differentiate between TKA patients with patellar crepitus and matched controls [2]. Incidence of crepitus of up to 14% has been reported in Insall-Burstein® II and PFC® Sigma® designs [3]. These designs, in addition to PFC® Sigma® TC3 (revision component), were included in the analyses. Primary and revision components of newer generation designs (NexGen®, Attune® and Attune® Revision) were also included. Designs were evaluated in a patient model with normal Insall-Salvati ratio and a modified model with
Shortening of patellar tendon after total knee arthroplasty (TKA) was previously reported by several studies. Its etiology still remains controversial. Patellar tendon shortening, a direct cause of patella baja, has a dramatic negative impact in terms of clinical outcomes after TKA. Main objective of this study is to assess the feasibility of utilizing a different technique with Ultrasound that is easy to use, cost-effective and able to eliminate the problem of differential magnification occurring in other techniques which count on standard x-rays and to establish the correlation between clinical outcomes and changes in
Purpose: Medial Opening Wedge High Tibial Osteotomy (MOWHTO) is a joint preserving procedure of the knee. Currently we understand the anatomical changes occurring in the varus/valgus plane, but our understanding of other anatomical changes are limited. The objective of this study is to determine immediate anatomical changes occurring about the knee following MOWHTO. Our hypothesis is that anatomical changes occur in all planes of motion. More specifically, we hypothesize that posterior tibial slope is increased and patellar height is decreased immediately following the osteotomy. Methods: This study was prospective in design. Patients with knee OA were evaluated according to strict inclusion and exclusion criteria. Pre-operative clinical assessment, radiographic evaluation, and patient assessment scores were performed. Intraoperatively, patients had radiostereometric analysis (RSA) beads placed in a predetermined pattern. Intraoperative radiographs were taken. The MOWHTO was then performed. A second radiograph was then taken following the osteotomy. The radiographs were analysed using dedicated RSA computer software to determine anatomical changes. Results: Eleven patients were included in this study. Average age was 50 years. Mean error and condition number were 0.70 and 74 respectively, indicating highly accurate and reliable results. Analysis of the proximal tibia showed an average valgus correction angle of 8.69 degrees. The average osteotomy size was 12.5mm (9–17.5). Posterior tibial slope increased on average by 2.07 degrees (+5.91–−1.56). Analysis of the patella revealed anatomical changes occurred in all planes. However, the only consistent alteration was a decrease in patellar height by an average of 8.16mm (1.79–13.17). Additionally, there was a consistent increase in
Minor degrees of malalignment of the patella and anatomical abnormalities including a flattened sulcus angle and an increased ratio between
Aim: To report our experience of revision knee arthroplasty with respect to surgical technique, joint line restoration and clinical outcome. Methods: A clinical and radiological review was made of 45 knee revisions performed between 1996 to1998 using the Kinemax system. The reasons for revisions were infection (19), wear (11), loosening (seven), base-plate fracture (four) and instability (five). A primary prosthesis was used in 10 (22%), a posterior stabiliser in 24 (53%) and a superstabiliser in 11 (24%). WOMAC pain and function scores, arc of motion and measurements of joint line and patellar height were made. Results: Three patients had died. Three knees had been revised a second time for instability and one had been arthrodesed for infection. The mean joint line elevation was 1.3mm compared with the primary and depressed 1.6mm when compared with the natural knee. Twenty-seven percent had patella infera and 13% had patella alta. A significant correlation was found between the change in
This study aimed to investigate the relationship between changes in patellar height and clinical outcomes at a mean follow-up of 7.7 years (5 to 10) after fixed-bearing posterior-stabilized total knee arthroplasty (PS-TKA). We retrospectively evaluated knee radiographs of 165 knees, which underwent fixed-bearing PS-TKA with patella resurfacing. The incidence of patella baja and changes in patellar height over a minimum of five years of follow-up were determined using Insall-Salvati ratio (ISR) measurement. We examined whether patella baja (ISR < 0.8) at final follow-up affected clinical outcomes, knee joint range of motion (ROM), and Knee Society Score (KSS). We also assessed inter- and intrarater reliability of ISR measurements and focused on the relationship between patellar height reduction beyond measurement error and clinical outcomes.Aims
Methods
The total knee replacement is one of the most common operations in an Orthopaedics Department. Despite of being a frequent procedure, it’s been calculated that between 18 and 20% of the patients aren’t satisfied with the result. One of the complications that may occur after TKR is patella baja, which has been related to poor outcomings. The main factor that may produce it after TKR is the shortening of the patellar tendon. As it has been published, the medial parapatellar approach and the eversion of the patella may cause patella baja. Many authors defend the use of minimally invasive approaches to prevent this complication. We studied if the use of the variation of the traditional approach that Insall described produces low patella. We have also analysed if this complication produces poorer outcomings. To know if the
Peri-prosthetic patellar fracture following resurfacing
as part of total knee replacement (TKR) is an infrequent yet challenging
complication. This case-control study was performed to identify
clinical, radiological and surgical factors that increase the risk
of developing a spontaneous patellar fracture after TKR. Patellar
fractures were identified in 74 patients (88 knees) from a series
of 7866 consecutive TKRs conducted between 1998 and 2009. After excluding
those with a previous history of extensor mechanism realignment
or a clear traumatic event, a metal-backed patella, any uncemented
component or subsequent infection, the remaining 64 fractures were
compared with a matched group of TKRs with an excellent outcome
defined by the Knee Society score. The mean age of patients with
a fracture was 70 years (51 to 81) at the time of TKR. Patellar
fractures were detected at a mean of 13.4 months (2 to 84) after
surgery. The incidence of patellar fracture was found to be strongly
associated with the number of previous knee operations, greater
pre-operative mechanical malalignment, smaller post-operative patellar
tendon length, thinner post-resection patellar thickness, and a
lower post-operative Insall-Salvati ratio. An understanding of the risk factors associated with spontaneous
patellar fracture following TKR provides a valuable insight into
prevention of this challenging complication.
Many radiographic techniques have been described for measuring patellar height. They can be divided into two groups: those that relate the position of the patella to the femur (direct) and those that relate it to the tibia (indirect). This article looks at the methods that have been described, the logic behind their conception and the critical analyses that have been performed to test them.
We report the outcome of 32 patients (37 knees) who underwent hemicallostasis with a dynamic external fixator for osteoarthritis of the medial compartment of the knee. There were 16 men (19 knees) and 16 women (18 knees) with a mean age at operation of 54.6 years (27 to 72). The aim was to achieve a valgus overcorrection of 2° to 8° or mechanical axis at 62.5% (± 12.5%). At a mean follow-up of 62.8 months (51 to 81) there was no change in the mean range of movement, and no statistically significant difference in the Insall-Salvati index or tibial slope (p = 0.11 and p = 0.15, respectively). The mean hip-knee-ankle angle changed from 190.6 (183° to 197°) to 176.0° (171° to 181°), with a mean final position of the mechanical axis of 58.5% (35.1% to 71.2%). The desired alignment was attained in 31 of 37 (84%) knees. There were 21 excellent, 13 good, two fair and one poor result according to the Oxford knee score with no correlation between age and final score. This score was at its best at one year with a statistically significant deterioration at two years (p = 0.001) followed by a small but not statistically significant deterioration until the final follow-up (p = 0.17). All the knees with Ahlback grade 1 osteoarthritis had excellent or good results. Complications included pin tract infections involving 16.4% of all pins used, delayed union in two, knee stiffness in four, fracture of the lateral cortex in one and ring sequestrum in one. In conclusion, hemicallostasis provides precision in attaining the desired alignment without interfering with tibial slope or patellar height, and is relatively free of serious complications.
Patella subluxation assessed on dynamic MRI has
previously been shown to be associated with anterior knee pain. In
this MRI study of 60 patients we investigated the relationship between
subluxation and multiple bony, cartilaginous and soft-tissue factors
that might predispose to subluxation using discriminant function
analysis. Patella engagement (% of patella cartilage overlapping with trochlea
cartilage) had the strongest relationship with subluxation. Patellae
with >
30% engagement tended not to sublux; those with <
30%
tended to sublux. Other factors that were associated with subluxation
included the tibial tubercle-trochlea notch distance, vastus medialis obliquus
distance from patella, patella alta, and the bony and cartilaginous
sulcus angles in the superior part of the trochlea. No relationship
was found between subluxation and sulcus angles for cartilage and
bone in the middle and lower part of the trochlea, cartilage thicknesses
and Wiberg classification of the patella. This study indicates that patella engagement is a key factor
associated with patellar subluxation. This suggests that in patients
with anterior knee pain with subluxation, resistant to conservative
management, surgery directed towards improving patella engagement
should be considered. A clinical trial is necessary to test this
hypothesis.