For all the research into arthroplasty, provision of total knee arthroplasty (TKR) services based on gender in the Australian context is yet to be explored. International literature points toward a heavily gender biased provision of TKA services, skewed away from female patients. This research has aimed to assess the current experience of Australian female patients and to explore better assessment techniques that could provide more equitable services. A retrospective cohort analysis has been conducted using pre-op PROMs data, where available, from the Australian National Joint Replacement Registry (AOANJRR), between 7 August 2018 and 31 December 2021, including: EQ VAS Health; Oxford Knee Score; joint pain; and KOOS-12. Data was adjusted for age, ASA score, BMI, primary diagnosis, public vs private hospital, surgeon gender and years of practice (as estimated from years of registry data available). Of 1,001,231 procedures performed, 27,431 were able to be analysed (12,300 male and 15,131 female). Gender-based bias against female patients reached statistical significance across all PROM scores, according to the Kruskal-Wallis test of difference (p-value <0.0001). Males were more likely to undergo TKR than females, with odds ratios remaining statistically significant when adjusted for age, ASA score, BMI, primary diagnosis, and hospital type. Numbers were further analysed for surgeon years of recorded practice and surgeon gender with mixed results. This study found that women were less likely to undergo TKR despite worse scores on every pre-op PROM available, thus we demonstrate a statistically significant gender-based bias against female patients. More effort needs to be made to identify the base of this bias and find new ways to assess patients that can provide more equitable provision of healthcare

Aims. The adequate provision of personal protective equipment (PPE) for healthcare workers has come under considerable scrutiny during the COVID-19 pandemic. This study aimed to evaluate staff awareness of PPE guidance, perceptions of PPE measures, and concerns regarding PPE use while caring for COVID-19 patients. In addition, responses of doctors, nurses, and other healthcare professionals (OHCPs) were compared. Methods. The inclusion criteria were all staff working in clinical areas of the hospital. Staff were invited to take part using a link to an online questionnaire advertised by email, posters displayed in clinical areas, and social media. Questions grouped into the three key themes - staff awareness, perceptions, and concerns - were answered using a five-point Likert scale. The Kruskal-Wallis test was used to compare results across all three groups of staff. Results. Overall, 315 staff took part in our study. There was a high awareness of PPE guidance at 84.4%, but only 52.4% of staff reported adequate PPE provision. 67.9% were still keen to come to work, despite very high levels of anxiety relating to contracting COVID-19 despite wearing PPE. Doctors had significantly higher ratings for questions relating to PPE awareness compared to other staff groups, while nursing staff and OHCPs had significantly higher levels of anxiety compared to doctors in relation to PPE and contracting COVID-19 (p < 0.05 using a Kruskal-Wallis test). Conclusion. We believe four recommendations are key to improve PPE measures and decrease anxiety: 1) nominated ward/department PPE champions; 2) anonymized reporting for PPE concerns; 3) formal PPE education sessions; and 4) drop-in counselling sessions for staff. We hope the insight and recommendations from this study can improve the PPE situation and maintain the health and wellbeing of the clinical work force, in order to care for COVID-19 patients safely and effectively

Frailty has been shown to be a risk predictor for peri-operative adverse events (AEs) in patients undergoing various type of spine surgery. However, its relationship with Patient Related Outcome Measures (PROMS) remains unknown. The primary objective of this study was to determine the impact of frailty on PROMS in patients undergoing surgery for thoraco-lumbar degenerative conditions. The secondary objective was to determine the association between frailty and baseline PROMS. This is a retrospective study of a prospective cohort of patients >55 years old who underwent surgery between 2012 and 2018. Patient data and PROMS (EQ-5D, SF-12, ODI, back and leg pain NRS) were extracted from the Canadian Spine Outcomes and Research Network registry for a single academic centre. Frailty was retrospectively calculated using the modified frailty index (mFI) and patient were classified as frail, pre-frail and non-frail. Patient characteristics and outcomes were analyzed using ANOVA or Kruskal-Wallis test for continuous variables and Chi square or Fisher's exact test for proportions. A generalized estimating equations (GEEs) regression model was used to assess the association between patients' baseline frailty status and PROMs measures at three and 12 months. 293 patients were included with a mean age of 67 ± 7 years. Twenty-two percent of the patients (n= 65) were frail, 59 % (n=172) were pre-frail and 19% (n=56) were non-frail. At baseline, the three groups had similar PROMS, except for the PCS which was worse in the frail group (mean difference [95% CI], −4.9 [−8.6;-1.1], p= 0.0083). The improvement in the EQ-5D, PCS, MCS, ODI, back and leg pain NRS scores was not significantly different between the three groups (p> 0.05). The was no difference in the evolution of the PROMS at three and 12 months between the three groups (p> 0.05). Although frailty is a known predictor of AEs, it does not predict worse PROMS after spine surgery in that population. At baseline, non-frail, pre-frail and frail patients have similar PROMS

Introduction. Pseudotumors have been reported following metal-on-metal total hip arthroplasty (THA); however, the natural history and longitudinal imaging findings of pseudotumors have yet to be fully analyzed. Our hypothesis was that pseudotumor size might change over time following metal-on-metal THA. This hypothesis was studied longitudinally using magnetic resonance imaging (MRI). Materials and Methods. Screening for pseudotumors was performed using MRI after large-diameter metal-on-metal THA. Initial MRI was conducted at a mean of 36 months postoperatively. Follow-up MRI was performed at a mean of 20 months after the detection of 24 pseudotumors in 20 asymptomatic patients. Pseudotumors were classified as cystic, solid, and mixed types. Fourteen hips were characterized as cystic type and 10 hips were defined as mixed type. There were three men and 17 women with a mean age of 63 years. Pseudotumor size was determined on MRI by manually outlining the greatest size of the mass. Serum cobalt and chromium ion levels were measured in nine patients with unilateral THA at the time of MRI. Statistical analysis was performed using the Kruskal-Wallis test and chi square test to compare age, gender, BMI, head diameter, cup inclination, cup anteversion, and pseudotumor type among changes of pseudotumor size. We compared the pseudotumor size for the three groups (increase in size, no change, decrease in size) using Kruskal-Wallis test and Mann-Whitney U test. Wilcoxon signed-rank test was used to compare median serum metal ion levels over time. A p value < 0.05 was considered significant. This study was approved by the ethics committee of our institution, and all patients provided informed consent. Results. The mean pseudotumor size changed from 729 mm. 2. to 877 mm. 2. Among the 24 hips, pseudotumors increased in size (Fig. 1) in eight (three cystic and five mixed) and decreased in size in six (four cystic and two mixed). Ten hips showed no changes in size (seven cystic and three mixed). We found no significant differences between changes of pseudotumor size and patient characteristics. The mean initial size of pseudotumor was bigger in pseudotumors with increased in size (1002 ± 309 mm. 2. ) than in those with decreased in size (542 ± 295 mm. 2. , p = 0.020) or no change (622 ± 448 mm. 2. , p = 0.041). The median cobalt ion levels at initial MRI and follow-up MRI were 2.0 µg/L and 1.8 µg/L, respectively. The median chromium ion levels at initial MRI and follow-up MRI were 2.0 µg/L and 3.1 µg/L, respectively. No significant differences were observed between the levels of either metal at initial and subsequent MRI. Conclusions. The present results suggest that pseudotumors frequently change in size in asymptomatic patients, and our hypothesis was verified. The initial size of pseudotumor was bigger in pseudotumors with increased in size than in those with decreased in size or no change. And we might predict that bigger pseudotumors would tend to increase in size

The literature indicates that femoroacetabular impingement (FAI) patients do not return to the level of controls (CTRL) following surgery. The purpose of this study was to compare hip biomechanics during stair climbing tasks in FAI patients before and two years after undergoing corrective surgery against healthy controls (CTRL). A total of 27 participants were included in this study. All participants underwent CT imaging at the local hospital, followed by three-dimensional motion analysis done at the human motion biomechanics laboratory at the local university. Participants who presented a cam deformity >50.5° in the oblique-axial or >60° in the radial planes, respectively, and who had a positive impingement test were placed in the FAI group (n=11, age=34.1±7.4 years, BMI=25.4±2.7 kg/m2). The remaining participants had no cam deformity and negative impingement test and were placed in the CTRL group (n=16, age=33.2±6.4 years, BMI=26.3±3.2 kg/m2). The CTRL group completed the biomechanics protocol once, whereas the FAI group completed the protocol twice, once prior to undergoing corrective surgery for the cam FAI, and the second time at approximately two years following surgery. At the human motion biomechanics laboratory, participants were outfitted with 45 retroreflective markers placed according to the UOMAM marker set. Participants completed five trials of stairs task on a three step instrumented stair case to measure ground reaction forces while 10 Vicon MX-13 cameras recorded the marker trajectories. Data was processed using Nexus software and divided into stair ascent and stair descent tasks. The trials were imported into custom written MatLab software to extract peak pelvis and hip kinematics and hip kinetic variables. Non-parametric Kruskal-Wallis tests were used to determine significant (p < 0.05) differences between the groups. No significant differences occurred during the stair descent task between any of the groups. During the stair ascent task, the CTRL group had significantly greater peak hip flexion angle (Pre-Op=58±7.1°, Post-Op=58.1±6.6°, CTRL=64.1±5.1°) and sagittal hip range of motion (ROM) (Pre-Op=56.7±6.7°, Post-Op=56.3±5.5°, CTRL=61.7±4.2°) than both the pre- and post-operative groups. Pre-operatively, the FAI group had significantly less peak hip adduction angle (Pre-Op=2±4.5°, Post-Op=3.4±4.4°, CTRL=5.5±3.7°) and hip frontal ROM (Pre-Op=9.9±3.4°, Post-Op=11.9±5.4°, CTRL=13.4±2.5°) compared to the CTRL group. No significant differences occurred in the kinetic variables. Our findings are in line with the Rylander and colleagues (2013) who also found that hip sagittal ROM did not improve following corrective surgery. Their study included a mix of cam and pincer-type FAI, and had a mean follow-up of approximately one year. Our cohort included only cam FAI and they had a mean follow-up of approximately two years, indicating with the extra year, the patients still did not show sagittal hip kinematics improvement. In the frontal plane, there was no significant difference between the post-op and the CTRL, indicating that the postoperative FAI reached the level of the CTRLs. This is in line with recent work that indicates a more medialized hip contact force vector following surgery, suggesting better hip stabilization

Introduction. It is well-known that wear debris generated by metal-on-metal hip replacements leads to aseptic loosening. This process starts in the local tissue where an inflammatory reaction is induced, followed by an periprosthetic osteolysis. MOM bearings generate particles as well as ions. The influence of both in human bodies is still the subject of debate. For instance hypersensitivity and high blood metal ion levels are under discussion for systemic reactions or pseudotumors around the hip replacement as a local reaction. The exact biopathologic mechanism is still unknown. The aim of this study was to investigate the impact of local injected metal ions and metal particles. Material and Methods. We used an established murine inflammation model with Balb/c mice and generated three groups. Group PBS (control group, n=10) got an injection of 50µl 0.1 vol% PBS-suspension, Group MI (Metal-ion, n=10) got an injection of 50µl metal ion suspension at a concentration of 200µg/l and Group MP (Metal-particles, n=10) got an injection of 50µl 0.1 vol% metal particle suspension each in the left knee. After incubation for 7 days the mice were euthanized and the extraction of the left knee ensued. Followed by immunhistochemical treatment with markers of inflammation that implied TNFα, IL-6, IL-1β, CD 45, CD 68, CD 3, we counted the positive cells in the synovial layer in the left knees by light microscopy, subdivided into visual fields 200× magnified. The statistical analysis was done with Kruskal-Wallis test and a post hoc Bonferroni correction. Results. The Group with metal particles showed significantly elevated inflammatory markers (TNFα, IL-6, IL-1β, CD 68, CD 45) compared to all other groups. Interestingly, CD 3 as a marker for T-lymphocytes showed no increased levels in all groups. The metal ion group showed significant elevated CD 45 expressions compared to the control group. Conclusion. The results clearly demonstrate that especially metal wear particles lead to an intensive inflammatory reaction. The tissue formations in the metal particle group show an osseous destructive behavior in previously demonstrated results, comparable to pseudotumors. But, in this study, the expression of the immunohistological markers CD 3, CD 45 and CD 68 indicate that the tissue consists of leucocytes and macrophages, whereas lymphocytes could not be detected. This might be due to an acute inflammatory reaction, whereas the adaptive immune response by T-lymphocytes seems not (yet) to be activated. Overall it must be stated that solid metal wear particles are responsible for local inflammatory reactions, whereas it is still unknown whether wear particles corrode in vivo and release a potentially high level of locally toxic metal ions

Lubricin is a proteoglycan that is a boundary lubricant in synovial joints and both a surface and collagen inter-fascicular lubricant in ligaments. The purpose of this study was to characterise the mRNA levels for lubricin in the anterior cruciate ligament (ACL), posterior cruciate ligament (PCL), medial collateral ligament (MCL), and lateral collateral ligament (LCL) in aging and surgically-induced menopausal rabbits. We hypothesised that lubricin mRNA levels would be increased in ligaments from aging and menopausal rabbits compared with ligaments from normal rabbits. All four knee ligaments (ACL, PCL, MCL, LCL) were isolated from normal (1-year-old rabbits, n=8), aging (3-year-old rabbits, n=6), and menopausal (1-year-old rabbits fourteen weeks after surgical ovariohysterectomy, n=8) female New Zealand White rabbits. RT-qPCR was used to evaluate the mRNA levels for lubricin normalised to the housekeeping gene 18S. After removing outliers, data for normal, aging, and menopausal rabbits for each knee ligament (ACL, PCL, MCL, LCL) were compared using ANOVA with linear contrasts or Kruskal-Wallis test with Conover post-hoc analysis. For ACLs, the mRNA levels for lubricin were increased in menopausal and aging rabbits compared with normal rabbits (p<0.056). For PCLs, trends for increased lubricin mRNA levels were found when comparing menopausal and aging rabbits with normal rabbits (p<0.092). For MCLs, the mRNA levels for lubricin were increased in menopausal and aging rabbits compared with normal rabbits (p<0.050). For LCLs, no differences in lubricin mRNA levels were detected comparing the three groups. For all four knee ligaments (ACL, PCL, MCL, LCL), no differences in lubricin mRNA levels were detected comparing the ligaments from menopausal rabbits with those from aging rabbits. Lubricin plays a role in collagen fascicle lubrication in ligaments (1,2). Increased lubricin gene expression was associated with mechanical changes (including decreased modulus and increased failure strain) in the aging rabbit MCL (3). Detection of similar molecular changes in the ACL, and possibly the PCL, may indicate that their mechanical properties may also change as a result of increased lubricin gene expression, thereby potentially pre-disposing these ligaments to damage accumulation. Compared to aging ligaments, aging tendons exhibited decreased lubricin gene and protein expression, and increased stiffness (4). Although opposite changes than aging ligaments, these findings support the relationship between lubricin and modulus/stiffness. The similarities between ligaments in the aging and menopausal groups may suggest that surgically-induced menopause results in a form of accelerated aging in the rabbit ACL, MCL and possibly PCL

Previous retrieval studies demonstrate increased tibial baseplate roughness leads to higher polyethylene backside wear in total knee arthroplasty (TKA). Micromotion between the polyethylene backside and tibial baseplate is affected by the locking mechanism design and can further increase backside wear. The purpose of this study was to examine modern locking mechanisms, in the setting of both roughened and polished tibial baseplates, on backside tibial polyethylene wear. Five TKA models were selected, all with different tibial baseplate and/or locking mechanism designs. Six retrieval tibial polyethylenes from each TKA model were matched based on time in vivo (TIV), age at TKA revision, BMI, gender, number of times revised, and revision reason. Two observers scored each polyethylene backside according to a visual damage score and individual damage modes. Primary outcomes were mean damage score and individual damage modes. Demographics were compared by one-way ANOVA. Damage scores and modes were analysed by the Kruskal-Wallis test and Dunn's multiple comparisons test. There were no differences among the groups based on TIV (p=0.962), age (p=0.651), BMI (p=0.951), gender, revision number, or reason for revision. There was a significant difference across groups for mean total damage score (p=0.029). The polished tibial design with a partial peripheral capture locking mechanism and anterior constraint demonstrated a significantly lower score compared to one of the roughened tibial designs with a complete peripheral-rim locking mechanism (13.0 vs. 22.1, p=0.018). Otherwise, mean total damage scores were not significant between groups. As far as modes of wear, there were identifiable differences among the groups based on abrasions (p=0.005). The polished design with a tongue-in-groove locking mechanism demonstrated a significantly higher score compared to both groups with roughened tibial baseplates (5.83 vs. 0.83, p=0.024 and 5.83 vs. 0.92, p=0.033). Only the two designs with roughened tibial baseplates demonstrated dimpling (5.67 and 8.67) which was significant when compared against all other groups (p0.99). No other significant differences were identified when examining burnishing, cold flow, scratching, or pitting. No polyethylene components exhibited embedded debris or delamination. Total damage scores were similar between all groups except when comparing one of the polished TKA design to one of the roughened designs. The other TKA model with a roughened tibial baseplate had similar damage scores to the polished designs, likely due to its updated locking mechanism. Dimpling wear patterns were specific for roughened tibial baseplates while abrasive wear patterns were identified in the design with a tongue-in-groove locking mechanism. Our study showed even in the setting of a roughened tibial baseplate, modern locking mechanisms decrease backside wear similar to that of other current generation TKA designs

Aims

Bacterial infection activates neutrophils to release neutrophil extracellular traps (NETs) in bacterial biofilms of periprosthetic joint infections (PJIs). The aim of this study was to evaluate the increase in NET activation and release (NETosis) and haemostasis markers in the plasma of patients with PJI, to evaluate whether such plasma induces the activation of neutrophils, to ascertain whether increased NETosis is also mediated by reduced DNaseI activity, to explore novel therapeutic interventions for NETosis in PJI in vitro, and to evaluate the potential diagnostic use of these markers.

Introduction. Successful cementless acetabular designs require sufficient initial stability between implant and bone (with interfacial motions <150 μm) and close opposition between the porous coating and the reamed bony surface of the acetabulum to obtaining bone ingrowth and secondary stability. While prior generations of cementless components showed good clinical results for long term fixation, modern designs continue to trend toward increased porosity and improved frictional characteristics to further enhance cup stability. Objectives. We intend to experimentally assess the differences in initial stability between a hemispherical acetabular component with a highly porous trabecular tantalum fixation surface (Continuum. ®. Acetabular System, Zimmer Inc, Warsaw, IN)(Fig 1) and a hemispherical component with the new highly porous Trabecular Titanium. ®. surface (Delta TT, Lima Corporate, Italy)(Fig 2) manufactured by electron beam melting. Material and methods. A total of 16 cups were used, 8 for each type. Each cup was used 4 times. Cups were implanted in polyurethane foam blocks with 1mm interference fit and subsequently edge loaded to failure. Two different foam block densities (0.24 g/cm. 3. and 0.32g/cm. 3. ) were used to model low- and high-density bone stock. Each cup was seated into a block under displacement control using a servohydraulic test machine (MTS Bionix 858, Eden Praire, MN) to engage the locking mechanism until axial forces reach 8 to 10 kN. During insertion, force and displacement were recorded to determine the implantation force for each component. After seating, initial acetabular component fixation was assessed using an edge loading test. Descriptive statistics are presented as means and standard deviations for continuous variables. The Kruskal-Wallis test was used to assess the effect of Cup on the outcomes: (1) Insertion force, (2) Insertion energy, (3) Ultimate load, (4) Yield load, and (5) Ultimate Energy. Pairwise comparisons were done using Mann-Whitney U test for significant outcomes and multiple comparisons were adjusted using Bonferroni correction. All analyses were performed with SAS version 9.3 (SAS Institute, Inc., Cary, NC, USA); a p-value less than 0.05 was considered statistically significant. Results. Delta TT cup required the same seating force (p=0.014) and 18% higher insertion energy (p=0.002) for fully seating compared to Continuum cup, however this difference is not clinically relevant. Delta TT cup exibithed more stability, as exibithed by significantly higher (35%) energy to ultimate load (p=0.014). No statistical differences were found in Ultimate load and Yield load among the 2 cups. Cups in higher density foam required higher force and energy to be seated. In edge load testing higher densities blocks generated higher force and energy accross all cup designs. Conclusions. The result of this study indicate increased interface stability in Trabecular Titanium cup compared to Porous tantalum cup with a low incresing in the energy required for fully seating

Introduction. Failure rates of Metal-on-Metal (MoM) ASR XL hip implants have been unacceptably high compared with other bearing surfaces, so patients must be monitored over the time checking for disorders in clinical condition, blood tests or in diagnostic imaging. Objectives. We have carried out a continuing prospective investigation to evaluate the relationship between blood metal ions measurements and ultrasound levels and to evaluate if ultrasound score can predict a future indication to revision. Materials and methods. From DePuy Recall of 2010 we have monitored 106 patients (51 males, 55 females, mean age 63.6) with ASRXL implants. The controls were performed annually. The following scales were used for patients evaluation:. Ultrasound score: 0 none; 1 fluid collection <20 mm, 2 fluid collection <20 mm, 3 solid mass: metallosis. Blood metal levels of Chromium-Cobalt (Cr-Co) (μg/l = ppb): normal <3 ppb, alert between 3 and 7 ppb, pathologic <7 ppb. Clinical Score: Harris Hip Score. Rx score, evaluating the prosthetic-bone integration and the inclination of acetabular component. Patients who presented positive clinical-instrumental conditions and values of Cr and Co > 3 mg/l were checked every 6 months. Statistical analysis was carried out with Non-parametric Kruskal-Wallis test and two factors Analysis of Variance using SAS System vers. 9.4. Results. The follow-up included 110 implants (4 are bilateral case). 43 patients (39,1 %) underwent revision surgery for failed MoM utilizing ceramic-on-polyethylene devices. At a mean time of 65,7 +/− 15,9 months, 47 patients had a ultrasound score of 0 (13 revised), 32 patients had a ultrasound score of 1 (9 revised), 20 patients had a ultrasound score of 2 (15 revised), 7 patients had a ultrasound score of 3 (6 revised); 44 patients had Cr value < 3 ppb (5 revised), 28 patients had Cr value <3 ppb<7 (6 revised), 34 patients had Cr value <7 ppb (32 revised), 25 patients had Co value < 3 ppb (5 revised), 20 patients had Co value <3 ppb<7 (1 revised), 61 patients had Co value > 3 ppb (37 revised). A positive correlation between blood metal ions values and ultrasound levels (p<0,001) and a statistically significant interaction between ultrasound score and indication to revision (p=0,037) were found. Discussion and Conclusion. As reported in literature also in our experience the ASR XL implant was afflicted by an excessive revision rate, associated with levels of metal ions significantly higher than other hip bearing surfaces. Our results demonstrate a positive correlation between blood Cr and Co levels and the amount of fluid collection: at higher levels of fluid collection correspond higher levels of blood metal ions. Since statistical analysis confirmed that the level of ultrasound score is correlated with indication to revision it is suggested to use ultrasounds, if the score is 2 or more, as parameter to revise MoM implants even in absence of pathologic blood ions levels

Purpose. Previous retrieval studies demonstrate increased tibial baseplate roughness leads to higher polyethylene backside wear in total knee arthroplasty (TKA). Micromotion between the polyethylene backside and baseplate is affected by the locking mechanism design and can further increase backside wear. This study's purpose was to examine modern locking mechanisms influence, in the setting of both polished and non-polished tibial baseplates, on backside tibial polyethylene damage and wear. Methods. Five TKA models were selected with different tibial baseplate and/or locking mechanism designs. Six retrieval tibial polyethylenes from each TKA model were matched based on time in vivo (TIV), age at TKA revision, BMI, gender, number of times revised, and revision reason. Two observers visually assessed each polyethylene. Primary outcomes were visual damage scores, individual visual damage modes, and linear wear rates determined on micro-computed tomography (micro-CT) scan in mm/year. Demographics were compared by one-way ANOVA. Damage scores, damage modes, and linear wear were analyzed by the Kruskal-Wallis test and Dunn's multiple comparisons test. Results. There were no differences among the groups based on TIV (p=0.962), age (p=0.609), BMI (p=0.951), gender, revision number, or reason for revision. There was a significant difference across groups for visual total damage score (p=0.031). The polished tibial design with a partial peripheral capture locking mechanism and anterior constraint demonstrated a significantly lower score compared to one of the non-polished tibial designs with a complete peripheral-rim locking mechanism (13.0 vs. 22.0, p=0.019). Otherwise, mean total damage scores were not significant between groups. There were identifiable differences among the groups based on abrasions (p=0.006). The polished design with a tongue-in-groove locking mechanism demonstrated a significantly higher score compared to one of the designs with a non-polished baseplate (5.83 vs. 0.83, p=0.016). Only the two designs with non-polished baseplates demonstrated dimpling (5.67 and 8.67), which was significant when compared against all other groups (p<0.0001), but not against each other (p>0.99). No other significant differences were identified when examining burnishing, cold flow, scratching, or pitting. No polyethylene components exhibited embedded debris or delamination. There was a significant difference among groups for linear wear on micro-CT scanning (p=0.003). Two of the polished baseplate designs, one with the partial peripheral rim capture and one with the tongue-in-groove locking mechanism, demonstrated significantly lower wear rates than the non-polished design with a complete peripheral-rim locking mechanism (p=0.008 and p=0.032, respectively). There were no other differences in wear rates between groups. Conclusions. Total damage scores and wear rates were similar between all groups except when comparing two of the polished TKA designs to one of the non-polished baseplate designs. The other TKA model with a non-polished tibial baseplate had similar damage scores and wear rates to the polished designs, likely due to its updated locking mechanism. Dimpling was specific for non-polished tibial baseplates while abrasions were identified in the design with a tongue-in-groove locking mechanism. Our study showed even in the setting of a non-polished tibial baseplate, modern locking mechanisms can decrease backside damage and wear similar to that of other current generation TKA designs. For any figures or tables, please contact authors directly (see Info & Metrics tab above).

Introduction. Proper alignment (tibial alignment, femoral alignment, and overall anatomic alignment) of the prosthesis during total knee replacement is critical in maximizing implant survival[7] and to reduce polyethylene wear[1]. Poor overall anatomic alignment of a total knee replacement was associated with a 6.9 times greater risk of failure due to tibial collapse, that varus tibial alignment is associated with a 3.2 times greater risk[2] and valgus femoral alignment is associated with a 5.1 times greater risk of failure[7]. To reduce this variability intramedullary (IM) instruments have been widely used, with increased risk of the fat emboli rate to the lungs and brain during TKA[6] and possible increase of blood loss[4, 5]. Or, alternatively, navigation has been used to achieve proper alignment and to reduce morbidity[3]. Recently, for distal femoral resection, inertial sensors have been coupled to extramedullary (EM) instruments to improve TKA surgery in terms of femoral implant alignment, with respect to femoral mechanical axis, and reduced morbidity by avoidance of IM canal violation. The purpose if this study is to compare blood loss and alignment of distal femoral cut in three cohorts of patients: 1 Operated with inertial based cutting guide; 2 Operated with navigation instruments; 3 operated with conventional IM instruments. Material and methods. From September to November 2014 30 consecutive patients, eligible for TKA, were randomly divided into three cohorts with 10 patients each:x 1 “EM Perseus”, patient operated with EM inertial based instruments (Perseus, Orthokey Italia srl, Florence, Italy); 2 “EM Nav”, operated with standard navigated technique, where bone resections were planned and verified by mean of navigation system (BLUIGS, Orthokey Italia srl, Florence, Italy); 3 “IM Conv”, operated with standard IM instrumentation. All patients were operated by the same surgical technique, implanted TKA were mobile bearing PS models, Gemini (Waldemar Link, Hamburg, Germany) and Attune (Depuy, Warsaw, Indiana). Anteroposterior, lateral, and full-limb weightbearing views preoperatively and postoperatively at discharge were obtained, taking care of neutral limb rotational positioning in all patients enrolled in the study. Angles between femoral mechanical axis and implant orientation on frontal and lateral planes were measured with a CAD software (Rhinoceros 3, McNeel Europe, Rome, Italy) by two independent persons, average value was used for statistical analysis. Haemoglobin values were recorded at three time intervals: the day before surgery, at 24h follow-up and at patients discharge. Statistical analysis. Kruskal-Wallis test was used to compare differences between the three cohorts in blood loss and femoral implant alignment. Results. All the three cohorts were comparable in terms of age, sex, preoperative limb alignment and preoperative haemoglobin values (Tab. 1). Haemoglobin ad discharge was reduced for all three cohorts (Tab. 2), no significant differences was found even if IM Conv group showed higher loss compared to EM Perseus and EM Nav groups. Femoral implant alignment deviation, considering perpendicularity with femoral mechanical axis as goal, was comparable in frontal and lateral plane for all three cohorts (Tab. 2). Discussion. The aim of the study was to compare the accuracy in femoral component positioning, on the coronal and sagittal plane obtained with a new inertial based EM instrument, with a standard IM distal femoral cutting jig and with navigation. We confirm our hypothesis that the use of inertial based EM instruments to perform the distal femoral bone cut in TKA is reliable and at least as accurate as the standard IM technique and navigation. Our study did not show a statistical decrease in blood loss when the femoral canal was not reamed (in inertial based EM, and navigated groups), even if patient operated with IM instruments had sensibly higher blood loss compared to the other two groups. This study was not exactly powered for that purpose, a study with a larger cohort and strict patient selection criteria would be required. This study demonstrates that inertial based EM instruments is accurate for femoral component alignment in TKA and compares favorably to navigation systems and standard IM techniques. Other indications for the use of inertial based EM instruments include all major femoral extraarticular deformities, the presence of ipsilateral long-stemmed hip arthroplasty, and the presence of hardware such as distal femoral plates and screws or IM nails

Introduction. There has been much discussion in the literature concerning the possible detrimental effects of metal ion circulating in the body after MOM THR. This study seeks to evaluate the differences in observed Co and Cr levels in blood after TKR and several popular THR options. Method. We compared chromium (Cr) and cobalt (Co) levels between three different hip replacement bearings and total knee replacements (TKR) over time. Blood samples were taken from patients who received metasul 28 mm (n=25), metasul 32 mm (n=25) and Durom (n=50) hip bearings and TKR (n=100), pre- operatively and post operatively at six, twelve and twenty-four month intervals. Blood samples were analysed for Co and Cr levels using ICPMS (Inductively coupled mass spectrometry) and reported as parts per billion. Results were compared using Kruskal-Wallis Test (nonparametric ANOVA). Results. No increase was seen in serum Co and Cr levels in TKR patients over time. There were statistically significant differences in Co levels between the TKR group and all bearing surfaces of THR (28, 32 mm and Durom), p<0.001 at two years. Cr levels were significantly higher (p<0.001) in Durom bearings vs TKR only at one year decreasing to p<0.01 at two years. Comparing ion levels over time in the hip group, only in the Durom cohort did serum Cr levels preop vs 12 and 24 months reach a statistical significance of p<0.001. For Co, all three bearings showed a statistically significant increment over time (p<0.01). Highest levels of ions were seen with the 28 mm bearings but comparison between the three THR bearings at two years showed no statistical difference in Cr or Co levels. Median blood Cr concentration did not exceed 1.6 ppb in any subgroup. All median Co concentrations were below 0.8ppb. Conclusions. Over a two-year period Co and Cr levels for TKR did not differ appreciably from preoperative levels. Both Cr and Co levels were only mildly elevated post THR for all bearings. Metasul 28 mm bearings require further follow-up as the Co levels were not seen to plateau at two years

Purpose. To evaluate the five year Radiostereometric Analysis (RSA) results of the NexGen LPS Trabecular Metal Tibial Monoblock component (TM) and the NexGen Option Stemmed cemented component (Cemented), (Zimmer, Warsaw IN). Method. 70 patients with osteoarthritis were included in a randomized series to receive either the TM implant or the cemented NG component. Surgery was performed by high volume arthoplasty specialists using standardized procedure. RSA exams were obtained postoperatively, at six months, one year, two years and five years. RSA outcomes were translations, rotations and maximum total point motion (MTPM) of the components. MTPM values were used to classify implants as ‘at risk’ or ‘stable’. Western Ontario and McMaster University Osteoarthritis Index (WOMAC) scores were gathered at all follow-ups. An analysis of variance was used to test for differences in age, body mass index (BMI), and subjective measures between implant groups. The Kruskal-Wallis test was used to investigate differences in maximum total point motion between implant groups. An analysis of variance was used to test for differences in translations and rotations between groups. Fishers exact test was used to investigate differences in proportions of implants found to be at risk between groups. Results. At the five year follow-up, 43 patients were able to be reached and were willing to participate in the follow-up exam. There were 25 in the trabecular metal group and 18 in the cemented group. There were no differences in subjective measures (WOMAC) between implant groups at any follow-up. At the five year follow-up there was no difference in MTPM between the cemented and trabecular metal groups (p=0.94) Compared to the cemented components, the trabecular metal tibial components had significantly higher subsidence than the cemented components (p=0.001). There were no other significant differences. The proportion of at risk components at five years was 2 of 16 (0.11, 95% CI, 0.03–0.33) in the cemented group and was 0 of 25 (0.0, 95% CI, 0.0–0.13) in the trabecular metal group (p=0.17). Conclusion. In the two year report on this cohort of patients, we indicated our uncertainty concerning the long term stability of the Trabecular Metal tibial implant due to the high initial migration seen in some cases. In this report we have seen stability of this implant out to five years and migrations in this period below the level of detection of our system in all cases. Given these results it is with increased confidence that we can state that this implant appears to achieve solid fixation despite high initial levels of migration

Introduction. This retrieval analysis study consisted of two goals. The first goal was to determine if there was a difference in the corrosion and fretting damage along the taper interface between large femoral heads in comparison to monopolar hemiarthroplasty heads. The second goal was to examine if the diameter of monopolar hemiarthroplasty heads can influence corrosion and fretting damage along the taper interface. Patients and Methods. This retrieval analysis compared the corrosion and fretting behaviour of 40 mm femoral heads (n = 13) to monopolar hemiarthroplasty heads (n = 17 for a diameter < 50 mm; n = 6 for a diameter ≥ 50 mm) such that all implants had a minimum implantation period of three months, a 12/14 mm taper, and the heads and stems consisted of CoCr alloy. The 40 mm heads articulated with a polyethylene cup whereas the monopolar hemiarthroplasty heads articulated with cartilage. The 40 mm heads were manufactured from one company whereas the monopolar hemiarthroplasty heads were manufactured from four different companies. Corrosion and fretting damage were assessed using a previous technique [1]. Table 1 lists the patient information and reasons for revision whereas Table 2 provides the implant information. The Mann Whitney U test and the Kruskal-Wallis test were performed for identifying significant differences for corrosion and fretting scores that were not normally distributed (α = 0.05). An unpaired student's t-test was conducted for comparing the head corrosion scores for the two head size groups of monopolar hemiarthroplasty implants since these scores were normally distributed. Results. As shown in Table 3, the 40 mm heads had an average head corrosion score of 6.4 ± 9.9 whereas the monopolar hemiarthroplasty heads had an average score of 13.8 ± 13.4 resulting in a significant statistical difference (p = 0.049). In regards to head fretting, the scores were 1.3 ± 1.9 for the 40 mm heads and 10.5 ± 18.2 for the monopolar hemiarthroplasty implants, but the difference was not statistically significant (p = 0.058). There were no significant statistical differences in the corrosion and fretting scores between the four manufacturers. A significant statistical difference was found for the head corrosion scores of the two monopolar hemiarthroplasty head size groups. Monopolar hemiarthroplasty heads with a diameter < 50 mm had an average score of 11.0 ± 10.2 whereas the heads with a diameter ≥ 50 mm yielded scores of 21.8 ± 18.6 (p = 0.043). Discussion/Conclusion. Monopolar hemiarthroplasty heads exhibit more corrosion damage along the taper interface than 40 mm heads. This study also revealed that monopolar hemiarthroplasty implants exhibit more corrosion damage with a larger diameter. This supports the argument that a greater head diameter increases the torque acting along the head-stem taper interface. This would increase the micromotion, which can deteriorate the protective oxide layer, and make the taper interface more vulnerable to crevice corrosion

Aims

The use of technology to assess balance and alignment during total knee surgery can provide an overload of numerical data to the surgeon. Meanwhile, this quantification holds the potential to clarify and guide the surgeon through the surgical decision process when selecting the appropriate bone recut or soft tissue adjustment when balancing a total knee. Therefore, this paper evaluates the potential of deploying supervised machine learning (ML) models to select a surgical correction based on patient-specific intra-operative assessments.

Aims

The current global pandemic due to COVID-19 is generating significant burden on the health service in the UK. On 23 March 2020, the UK government issued requirements for a national lockdown. The aim of this multicentre study is to gain a greater understanding of the impact lockdown has had on the rates, mechanisms and types of injuries together with their management across a regional trauma service.

Using inaccurate quotations can propagate misleading information, which might affect the management of patients. The aim of this study was to determine the predictors of quotation inaccuracy in the peer-reviewed orthopaedic literature related to the scaphoid. We randomly selected 100 papers from ten orthopaedic journals. All references were retrieved in full text when available or otherwise excluded. Two observers independently rated all quotations from the selected papers by comparing the claims made by the authors with the data and expressed opinions of the reference source. A statistical analysis determined which article-related factors were predictors of quotation inaccuracy. The mean total inaccuracy rate of the 3840 verified quotes was 7.6%. There was no correlation between the rate of inaccuracy and the impact factor of the journal. Multivariable analysis identified the journal and the type of study (clinical, biomechanical, methodological, case report or review) as important predictors of the total quotation inaccuracy rate.

We concluded that inaccurate quotations in the peer-reviewed orthopaedic literature related to the scaphoid were common and slightly more so for certain journals and certain study types. Authors, reviewers and editorial staff play an important role in reducing this inaccuracy.