Purpose. Introduce an Integrated Approach for Orthopedic-Sports Medicine Practice and Patient Care Management that. Is built around effective and efficient surgical techniques, and patient care management processes. Integrates Operations and Service Excellence best practices with patient care management processes. Integrates orthopedic care delivery between outpatient clinic, pre-surgery, surgery, inpatient, (acute care) and post acute care settings. Delivers exceptional clinical, patient satisfaction and financial outcomes as validated by independent national healthcare benchmarking organization. Helps position Ortho-Sports medicine services for strategic growth. Is replicable to develop Ortho-Sports Medicine Centers of Excellence. Presentation illustrates the ‘Ten Elements’ approach to implement the Ortho-Sports Medicine Centers of Excellence and demonstrate the effectiveness of the approach with an outcomes study from over 1000 total knee arthroplasty (TKA) procedures. During the presentation, the speakers would share the key clinical, patient satisfaction, and financial outcomes achieved by the implementation of the best practices defined in our ‘Ten Elements’ approach. All performance data elements are collected, validated and analyzed by an independent third party, national healthcare benchmarking company. During the presentation Dr. Bramlett would elaborate on the surgical protocol, and the key differentiating steps in procedure technique from traditional approach that significantly enhances procedure effectiveness, efficiency and lowers the patient complication rate as demonstrated by benchmarking data. Speakers would further present the key elements of Total Knee Arthoplasty procedure that focus on patient education, patient participation in pre-surgical weight loss and pre-habilitation program, anesthesia approach, avoiding tourniquet use and deep veen thrombosis (DVT) risk reduction, early post operative patient ambulation and weight bearing, and post operative patient management approach. On average the ortho-sports medicine clinical of Alabama TKA patients are disharged from the hospital in 2.6 days, and experience 65 percent less complications than expected for a similar patient population and assume early control of their independent functionality

Introduction

In total knee arthroplasty, the aim is to relieve pain and provide a stable, functional knee. Sagittal stability is crucial in enabling a patient to return to functional activities. Knee implants with a medial pivot (MP) design are thought to more accurately reproduce the mechanics of the native joint, and potentially confer greater antero-posterior stability through the range of flexion than some other implant designs.

To date, there are no clear guidelines from the National Institute of Clinical Excellence or the British Orthopaedic Association regarding the use of Autologous Blood Transfusion (ABT) drains after elective primary Total Knee Replacement (TKR). There is little evidence to comparing specifically the use of ABT drains versus no drain. The majority of local practice is based on current evidence and personal surgical experience.

We aim to assess whether the use of ABT drains effects the haemoglobin level at day 1 post-operation and thus alter the requirement for allogenic blood transfusion. In addition we aim to establish whether ABT drains reduce post-operative infection risk and length of hospital stay.

Forty-two patients undergoing elective primary TKR in West London between September 2011 and December 2011 were evaluated pre- and post-operatively. Patient records were scrutinised. The patient population was divided into those who received no drain post-operatively and those with an ABT drain where fluid was suctioned out of the knee in a closed system, filtered in a separate compartment and re-transfused into the patient.

Twenty-six patients had ABT drains and 4 (15.4%) required an allogenic blood transfusion post-operatively. Sixteen patients received no drain and 5 (31.3%) required allogenic blood. There was no statistical difference between these two groups (p=0.22). There was no statistical difference (p=0.75) in the average day 1 haemoglobin drop between the ABT drain and no drain groups with haemoglobin drops of 2.80 and 2.91 respectively. There was no statistical difference in the length of hospital stay between the 2 groups (p=0.35). There was no statistical difference (p=0.26) in infection rates between the 2 groups (2 in ABT drains Vs. 0 in no drains). Of the 2 patients who experienced complications one had cellulitis and the other had an infected haematoma, which was subsequently washed out.

The results identify little benefit in using ABT drains to reduce the requirement for allogenic blood transfusion in the post-operative period following TKR. However, due to small patient numbers transfusion rates of 31.3% in the ABT drain group Vs. 15.4% in the no drain group cannot be ignored. Therefore further studies including larger patient numbers with power calculations are required before a true observation can be identified.

Introduction

In total knee arthroplalsties, there are risks of revision surgeries because of aseptic loosening, polyethylene wear, and metal component breakage. The data such as model, type, size, and manufacturing companies are required at the time of revision surgeries. However, it is sometimes difficult to acquire such data due to patient's change of address and the elimination and consolidation of hospitals in the long-term. Therefore, we try to use the Radio Frequency IDentification (RFID) in the total knee joint system.

Purpose

To compare Radiostereometric Analysis (RSA) and subjective outcomes of Total Knee Arthroplasty (TKA) and Total Ankle Arthroplasty (TAA).

Orthopaedic surgeons and their patients continue to seek better functional outcomes after total knee replacement, but TKA designs claim characteristic kinematic performance that is rarely assessed in patients.

The objectives of this investigation is to determine the in vivo kinematics in knees with Cruciate Retaining TKA using Patient Specific Technology during activities of daily living and to compare the findings with previous studies of kinematics of other CR TKA designs.

Four knees were operated by Triathlon CR TKA using Patient Specific Technology and a fluoroscopic measurement technique has been used to provide detailed three-dimensional kinematic assessment of knee arthroplasty function during three motor tasks. 3D fluoroscopic analysis was performed at 4-month follow-up.

The range of flexion was 90°(range 5°–95°) during chair-rising, 80°(range 0°–80°) during step up and 100° (range 0°–100°) during leg extension. The corresponding average external rotation of the femur on the tibial base-plate was 7.6° (range +4.3°; +11.9°), 9.5° (+4.0°; 13.5°) and 11.6° (+4.5°; +16.1°). The mean antero-posterior translations between femoral and tibial components during the three motor tasks were +4.7 (−3.7; +1.0), +6.4 (−3.8; +2.6) and +8,4 (−4.9; +3.5) mm on the medial compartment, and −2.5 (−7.1; −9.6), −3.6 (−6.1; −9.7), −2.6 (−7.7; −10.3) mm on the lateral compartment, respectively, with the medial condyle moving progressively anterior with flexion, and the medial condyle moving progressively posterior with flexion.

We compared Triathlon CR PSI TKA results from this study with Genesis II CR TKA, with Duracon CR TKA, with Triathlon CR TKA and with the healthy knee kinematics. The results of this study showed no screw home mechanism. The internal rotation of the tibia with knee flexion is close to normal, better than Genesis II, Duracon and Triathlon CR TKA operated with standard surgery.

The medial condyle is characterized by the same pattern of the other implants, with a paradoxical anterior translation of 5 mm.

The lateral condyle shows a posterior rollback better than Triathlon CR operated with standard surgery.

For the first time is demonstrated that the surgical technique can modify the tibio-femoral kinematics.

Background

Post operative analgesia is an important part of Total Knee Arthroplasty (TKA) to facilitate early mobilisation and patient satisfaction. We investigated the effect of periarticular infiltration of the joint with chirocaine local anaesthetic (LA) on the requirement of analgesic in the first 24 hrs period post op.

Alignment and soft tissue balance are two of the most important factors that influence early and long term outcome of total knee arthroplasty. Current clinical practice involves the use of plain radiographs for preoperative planning and conventional instrumentation for intra operative alignment. The aim of this study is to assess the Signature. TM. Personalised system using patient specific guides developed from MRI. The Signature. TM. system is used with the Vanguard. R. Complete Knee System. This system is compared with conventional instrumentation and computer assisted navigation with the Vanguard system. Patients were randomised into 3 groups of 50 to either Conventional Instumented Knee, Computer Navigation Assisted Knee Arthroplasty or Signature Personalised Knee Arthoplasty. All patients had the Vanguard Total knee Arthroplasty Implanted. All patients underwent Long leg X-rays and CT Scans to measure Alignment at pre-op and 6 months post-op. All patients had clinical review and the Knee Society Score (KSS) at 1 year post surgery was used to measure the outcome. A complete dataset was obtained for 124 patients. There were significant differences in alignment on Long leg films ot of CT scan with perth protocol. Notably the Signature group had the smallest spread of outliers. In conclusion the Signature knee system compares well in comparison with traditional instrumentation and CAS Total Knee Arthroplasty

Purpose. Traditional total knee arthoplasty techniques have involved implantation of diaphyseal stems to aid in fixation expecially when using constrained polyethylene inserts. While the debate over cemented vs uncemented stems continues, the actual use of stems is considered routine. The authors' experience with cemented stemmed knee revisions in older patients with osteoporotic bone has been favorable. Our younger patients with press-fit stems from varying manufacturers have been plagued with a relatively high incidence of component loosening and stem tip pain in the tibia and occasionally thigh. We report the early results of the first 20 total knee revisions using press-fit metaphyseal filling sleeved stemless implants with constrained bearings. Methods. Twenty three patients with failed primary or revision total knees were assigned to receive stemless sleeved revision knee designs using the DePuy MBT/TC3 system. Reasons for revision included loosening, implant fracture, stiffness, instability, and stem pain. Twenty patients (ages ranging from 42–73) were successfully reconstructed without stems. Six knees with significant uncontained cavitary defects were included. Three patients with unexpectedly osteoporotic metaphyseal bone were revised with cemented stemmed implants and excluded. All cases used cement for initial fixation on the cut bone surface and fully constrained mobile bearing inserts. Results. Follow up ranged from six months to three years. All patients had radiographic evidence of well fixed stable implants on most recent examination. All four cases of revision for “end of stem pain” had complete resolution of symptoms within two weeks of revision surgery. Long leg anterior posterior mechanical alignment x-rays measured within two degrees of neutral in all cases. Knee Society Scores improved an average of 34 points. Clinical results for revision for stiffness had the lowest final scores post operatively. Conclusion. Stemmed total knee arthroplasty revision implants with or without cement are considered the standard for most revision reconstructions. Recently, primary total hip replacements using newer short metaphyseal stems have shown promising early clinical results. This case series of twenty total knee revisions using stemless press-fit metaphyseal sleeves shows similarly favorable outcomes. The complications of stemmed implants such as stem tip pain and difficulty of cemented stem removal can be avoided successfully in non-osteporotic bone reconstructions. With stable bony ingrowth visible on early post-operatyive radiographs, long term stable fixation even with constrained bearings is expected. Longer follow up will be needed to validate this technique for routine use

Background. Cement restrictors are used for maintaining good filling and pressurization of bone cement during hip and knee arthroplasties. The limitations of certain cement restrictors include the inability to accommodate for large medullary canals particularly in revision procedures. We describe a technique using SurgicelTM (Johnson & Johnson) and SPONGOSTAN™ (Johnson & Johnson) (Fig 1) to form a cement restrictor that can accommodate for large canal diameters and provide excellent pressurisation. Technique. The technique involves the application of SPONGOSTAN™ (Johnson & Johnson) foam onto a SurgicelTM (Johnson & Johnson) mesh which is then rolled onto the SPONGOSTAN™ foam forming a uniform cylindrical structure Figs 2,3. The diameter of the restrictor can be adjusted according to the desired femoral canal diameter through increasing the thickness of the SPONGOSTAN™ (Johnson & Johnson) foam. The restrictor is then inserted into the desired position in the medullary canal where it expands uniformly creating an effective restrictor and bone plug Fig 4. Bone cement is then applied and pressurisation commenced prior to the insertion of the implant Fig5. SPONGOSTAN™ is an absorbable haemostatic sponge intended for haemostatic use by applying to a bleeding surface. It consists of a sterile, water-insoluble, malleable, porcine gelatin absorbable sponge. Surgicel ™ is an absorbable hemostatic agent composed of oxidized regenerated cellulose. It is a sterile, absorbable knitted fabric that is flexible and adheres readily to bleeding surfaces. Both products are routinely used for their haemostatic properties in various surgical disciplines. Discussion. The use of intramedullary plugs in cemented total joint arthroplasty is essential in order to achieve good filling and pressurization in hip and knee arthoplasties, traditionally, a small piece of bone or a cement restrictor may be used to plug the shaft. Distal plugs seal the femoral canal, improve fixation and prevent bone cement from leaking during delivery and pressurization. Plugging the intramedullary canal during total hip arthroplasty increases penetration of cement into cancellous bone proximal to the intramedullary plug. Numerous plug designs and materials are available ranging from non-resorbable to resorbable. Regardless of design, all restrictors should avoid intramedullary cement leakage and plug migration during cement and stem insertion to ensure adequate intramedullary pressures. In some instances the diameter of the femoral canal is too wide to accommodate a conventional cement restrictor particularly when crossing the femoral isthmus and even more so in revision procedures requiring the implantation of long stemmed cemented components. The use of the Surgicel-Spongostan haemostatic restrictor overcomes some of the limitations of a standard cement restrictors. These include the ability to bypass a narrow femoral isthmus, accommodate large femoral canals, particularly in revision procedures, and the flexibility of adjusting the restrictor to the desired diameter of the medullary canal and in effect providing a bespoke cement restrictor. This technique was used successfully in over 300 revision hip and knee procedures with no adverse effects and excellent outcomes

Total knee arthoplasty (TKA) remains a standard treatment for advanced knee arthritis. The aim of the procedure is to restore function and relieve pain ideally for the rest of patient's life. Patient matched templating (PMT) or patient specific instrumentation (PSI) is a recent development for alignment of TKA components that uses disposable guides. The users of PSI claim it to be the optimum balance of new technology and conventional technique by reducing the complexity of conventional alignment and sizing tools. To assess the clinical and radiological outcome of Primary TKA done with PSI. More than 200 cases of TKA have been done in our unit using PSI and we analysed the radiographic outcome of these cases postoperatively. We also reviewed the clinical outcome of 103 patients with 1 year and 43 patients with 2 year follow-up. Data was collected prospectively: pre-operatively and at 1 year and 2 years post-operatively including Oxford knee score (OKS), WOMAC and American knee society score (AKS). Standard AP and lateral films were done pre-operatively and post-operatively. Mean age was 66 years. There were 56 female and 47 male patients. Mean post-operative angles on standard films were: Alpha = 95.6, Beta = 88.4, Saggittal femur = 3.4 and Saggittal tibia = 90.8. Of the 103 cases with 1 year follow-up, there was significant improvement in all clinical outcome scores. Mean OKS improved from 18 to 39 at 1 year and remained the same at 2 years, WOMAC improved from 40 to 18 in both 1 and 2 years post-op. AKS Total improved from 79 to 173 at 1 year and 170 at 2 years. Performing TKA using PSI is safe and provides good radiological alignment in the coronal and sagittal plane. Significant improvement in outcome scores were seen at one and two year follow up and reached levels that compared favourably with other reported series of TKA outcome from our unit

To evaluate prospectively the mid-term results of the Zimmer Unicondylar Knee arthoplasty (UKA). Between 2005 and 2012, 187 unicompartmental knee arthroplasties (UKA) were performed by a single surgeon using a fixed-bearing prosthesis (Zimmer). 37 cases were excluded as either were lost to follow-up or had less than six months follow-up. The study included 150 UKAs. Deformity, if present, was correctable. Patellofemoral joint (PFJ) disease was not considered as an absolute contraindication. The average patient age at the time of surgery was 66 years (range 42–88 years); 78 of which were male. Mean follow-up time was 3.6 years (range 7–81 months). Mean Body Mass Index (BMI) was 29 (range 21–41). Clinical and conventional radiological evaluations were carried out at six months, one, two and five years postoperatively. 147 cases were medial compartment replacement and three were lateral. 86 patients had grade III OA and 64 had grade IV (Kellgren and Lawrence). 113 patients had an element of PFJ disease. The mean Knee Society knee and function scores had an improvement from 55 and 54 points pre-operatively to 95 and 94 points respectively at time of most recent evaluation. The average flexion improved from 116 degrees pre-operatively to 127 degrees. Two cases were revised, one due to progression of osteoarthritis in the lateral compartment of the knee and the other was due to arthrofibrosis. The Zimmer unicompartmental knee arthroplasty provided excellent pain relief and restoration of function in carefully selected patients. However, long-term studies are necessary to investigate the survival rate for this prothesis

Purpose. The patella provides a mechanical advantage to the knee extensor mechanism. Patellectomy, performed for trauma or patellofemoral arthrosis, does not preclude the development of tibiofemoral arthrosis. Total knee arthroplasty is the mainstay of treatment for tibiofemoral arthrosis. The purpose of this study was to evaluate the outcomes of total knee arthoplasty in patients who previously underwent patellectomy. Method. A retrospective analysis was completed on a prospectively collected database to identify all patients who underwent total knee arthroplasty following a previous patellectomy. Sixty-one total knee arthroplasties in 57 patients were identified. Patient demographics as well as functional outcome scores, including WOMAC and Knee Society Scores, were evaluated. Results. Thirty-six females (63.2%) and 21 males (36.8%) underwent a Total knee arthroplasty between July 1984 and April 2010. Mean follow up was 6.0 years (3 months–20 years). Mean Age and BMI was 59.8 8.6 and 30.5 5.8 respectively. Patellectomy was performed for trauma (56) and patellofemoral arthosis (five). All polyethylene inserts were cruciate substituting. There were five deaths and 10 knees (16.4%) required revision surgery. Causes for failure included aseptic loosening (2), polyethylene wear (3), component fracture (2), infection (2) and stiffness (1). WOMAC scores improved from 38.0 14.1 pre-operatively to 58.5 22.1 at latest review. Knee Society scores improved from 81.5 31.2 to 136.0 41.0. Range of motion and extensor lag changed preoperatively from 105.7 15.9 and 4.3 15.5 degrees to 110.7 12.1 and 6.3 7.1 degrees postoperatively. Conclusion. Despite the mechanical disadvantage to the knee extensor mechanism rendered by patellectomy, total knee arthroplasty is an effective treatment option for tibiofemoral arthrosis in these patients

Introduction. A few follow-up studies of high flexion total knee arthoplasties report disturbingly high incidences of femoral loosening. Finite element analysis showed a high risk for early loosening at the cement-implant interface at the anterior flange. However, femoral implant fixation is depending on two interfaces: cement-implant interface and the cement-bone interface. Due to the geometry of the distal femur, a part of the cement-bone interface consists of cement-cortical bone interface. The strength of the cement-bone interface is lower than the strength of the cement-implant interface. The research questions addressed in this study were: 1) which interface is more prone to loosening and 2) what is the effect of different surgical preparation techniques on the risk for early loosening. Materials & methods. To achieve data for the cement-(cortical)bone interface strength and the effects of different preparation techniques on interfacial strength, human cadaver interface stress tests were performed for different preparation techniques of the bony surface and the results were implemented in a finite element (FE) model as described before. The FE model consisted of a proximal tibia and fibula, TKA components, a quadriceps and patella tendon and a non-resurfaced patella. For use in this study, the distal femur was integrated in the FE model including cohesive interface elements and a 1 mm bone cement layer. In the model, the cement-bone interface was divided into two areas, representing cortical and cancellous bone. The posterior-stabilised PFC Sigma RP-F (DePuy, J&J, USA) was incorporated in the FE knee model following the surgical procedure provided by the manufacturer. A full weight-bearing squatting cycle was simulated (ROM = 50°-155°). The interface failure index was calculated. Results. Overall, the highest stresses were found at the proximo-medial part beneath the anterior flange of the femoral component. Highest shear stresses were found at the cement-implant interface (peak shear stress of 3.33 MPa at 150° of flexion). Highest tensile stresses were found at the cement-cortical bone interface (peak tensile stress of 1.30 MPa at 150° of flexion). The failure index was highest at the cement-bone interface. When the total anterior flange was covering cancellous bone, 0.4% of the cement-bone interface would fail and 0% of the cement-implant interface at 145° of flexion. In the more realistic simulation of cortical bone with periost, almost 31.3% of the complete cement-bone interface would fail even within normal range of motion (<120°). This can be reduced by drilling holes through the cortex to 2.6%. Discussion. Obviously, the FE knee model utilized in this study contains limitations which may have affected the interface stresses calculated. However, the results presented here clearly demonstrate high risk of early loosening at the cement-bone interface. This risk can be reduced by some simple preparation techniques of the cortex behind the anterior flange. Proper anterior fixation of the femoral component, and thus adequate surgical technique, is essential to reduce the risk of femoral loosening for high-flexion TKA

Purpose. Prospective randomized intervention trial to determine whether patients undergoing rotating platform total knee arthroplasty have better clinical outcomes at two years when compared to patients receiving fixed bearing total knee arthroplasty as measured by the WOMAC, SF-36 and Knee Society (KSS) scores. Method. 67 consecutive patients (33 males and 34 females; average age 66 years) were randomized into either receiving a DePuy Sigma rotating platform (RP) total knee arthroplasty (29 patients) or a DePuy Sigma fixed bearing (FB) total knee arthroplasty (38 patients). Inclusion criteria included patients between the ages of 45–75 undergoing single-sided total knee arthoplasty for clinically significant osteoarthritic degeneration. Pain, disability and well-being were assessed using the WOMAC, KSS, and SF-36 preoperatively and at 6 months, 1 year and 2 years post-operatively. In addition, intraoperative measures were collected. Pre-operative radiographs were analyzed using the Kellgren and Lawrence Score, modified Scotts Scoring and mechanical axis. Post-operative radiographs were collected at 1 and 2 years and analyzed to identify evidence of prosthetic loosening, implant positioning and limb alignment. Results. The two groups were well-matched following randomization (age, BMI, side) and had no significant differences in intraoperative measures (operative time, estimated blood loss). There were no differences in the groups with respect to their preoperative radiographs. The average female patient was younger compared to their male cohorts (mean female = 63; mean male 68 p=0.005). The post-operative radiographs did not reveal any differences between RP and FB groups when comparing sagittal alignment of femoral and tibial components, patellar tilt and patellar location. With respect to clinical outcomes, both groups reported statistically significant improvements in KSS, WOMAC and SF-36 scores. There were no differences in their pre- and post-operative SF-36 mental component scores. The 1 year WOMAC function score was significantly higher (worse outcome) in the FB group (mean = 18) compared to the RP group (mean 7.8) (p < 0.01). Two year KSS scores were significantly higher (better outcome) in the FB group (mean = 95.7) compared to the RP group (mean = 85.9) (p < 0.05). Conclusion. Both rotating platform and fixed bearing total knee arthroplasty result in clinical improvement over pre-operative function, but has no effect on the mental component of the SF-36. The current study suggests that there is not a clear benefit in selecting either a rotating platform or a fixed bearing total knee system; rather both implants result in improved function. Interestingly, when comparing the results of the WOMAC and KSS, although both measure functional outcomes, when applied to the same population demonstrate differing sensitivity