This study investigated concurrent talar dome injuries associated with tibial pilon fractures, mapping their distribution across the proximal talar dome articular surface. It compared the two main mechanisms of injury (MOI), falling from a height and motor vehicle accident (MVA), and whether the fractures were open or closed. From a previously compiled database of acute distal tibial pilon fractures (AO/OTA 43B/C) in adults of 105 cases, 53 cases were identified with a concurrent injury to the talar dome with a known mechanism of injury and in 44 it was known if the fracture was open or closed. Case specific 2D injury maps were created using a 1x1mm grid, which were overlayed in an Excel document to allow for comparative analyses. A two-way ANOVA was conducted that examined the effect of both MOI and if the fracture was open or closed on what percentage of the talar dome surface was injured. There was a statistically-significant difference between the average percentage of injured squares on the talar dome by both whether the fracture was open or closed (f(1)=5.27, p= .027) and the mechanism of injury (f(1)=8.08, p= .007), though the interaction between these was not significant (p= .156). Open injuries and injuries that occurred during an MVA were more likely to increase the surface area of the talar dome injuries. We have identified both MOI and if the fracture was either open or closed impacts the size of the injury present on the talar dome. Future research will investigate the aetiology of the differences noted, highlighting the clinical implications. Surgeons treating tibial pilon fractures caused by either a MVA or an open fracture, should be aware of an increased risk of large injuries to the surface of the talar dome

Introduction. Knee dislocations, vascular injuries and floating knee injuries can be initially managed by a external fixator. Fixator design constructs include the AO pattern and the Diamond pattern. However, these traditional constructs do not adhere to basic principles of external fixation. The Manchester pattern knee-spanning external fixator is a new construct pattern, which uses beam loading and multiplanar fixation. There is no data on any construct pattern. This study compares the stability of these designs. Materials & Methods. Hoffman III (Stryker, USA) external fixation constructs were applied to articulated models of the lower limb, spanning the knee with a diamond pattern and a Manchester pattern. The stiffness was loaded both statically and cyclically with a Bose 3510 Electroforce mechanical testing jig (TA Instruments). A ramp to load test was performed initially and cyclical loading for measurement of stiffness over the test period. The results were analysed with a paired t-test and ANOVA. Results. The mean stiffness with the diamond pattern fixator was significantly less stiff than the Manchester pattern fixator – by a factor of 3 (40N/mm vs 115N/mm). Displacement increased in all patterns over simulated loading equating to six weeks. The diamond pattern demonstrated a 50%% increase in displacement over time. The Manchester pattern demonstrated only 20% increase in displacement over time. These are all statistically significant (p<0.01). Conclusions. The aim of an external fixator in knee dislocations and vascular injuries is to provide stability, prevent displacement and protect repairs. Vascular injuries often require fixation for several weeks to protect a repair. The Manchester pattern, applying the principles of external fixation, provides a stiffer construct and also confers greater stability over the time a fixator may be required. We commend this more informed design for the management of knee dislocations and vascular injuries

The Coronal Plane Alignment of the Knee (CPAK) is a recent method for classifying knees using the hip-knee-ankle angle and joint line obliquity to assist surgeons in selection of an optimal alignment philosophy in total knee arthroplasty (TKA)1. It is unclear, however, how CPAK classification impacts pre-operative joint balance. Our objective was to characterise joint balance differences between CPAK categories. A retrospective review of TKA's using the OMNIBotics platform and BalanceBot (Corin, UK) using a tibia first workflow was performed. Lateral distal femoral angle (LDFA) and medial proximal tibial angle (MPTA) were landmarked intra-operatively and corrected for wear. Joint gaps were measured under a load of 70–90N after the tibial resection. Resection thicknesses were validated to recreate the pre-tibial resection joint balance. Knees were subdivided into 9 categories as described by MacDessi et al.1 Differences in balance at 10°, 40° and 90° were determined using a one-way 2-tailed ANOVA test with a critical p-value of 0.05. 1124 knees satisfied inclusion criteria. The highest proportion of knees (60.7%) are CPAK I with a varus aHKA and Distal Apex JLO, 79.8% report a Distal Apex JLO and 69.3% report a varus aHKA. Greater medial gaps are observed in varus (I, IV, VII) compared to neutral (II, V, VIII) and valgus knees (III, VI, IX) (p<0.05 in all cases) as well as in the Distal Apex (I, II, III) compared to Neutral groups (IV, V, VI) (p<0.05 in all cases). Comparisons could not be made with the Proximal Apex groups due to low frequency (≤2.5%). Significant differences in joint balance were observed between and within CPAK groups. Although both hip-knee-ankle angle and joint line orientation are associated with joint balance, boney anatomy alone is not sufficient to fully characterize the knee

Residual strain development in biological tissue is believed to result from remodeling in response to repetitive loading. This study hypothesized that differences in in-vivo loading between levels of the bovine tail result in differences in intervertebral disc (IVD) annulus fibrosus (AF) microstructural remodeling. The hypothesis was tested by quantifying tail musculature using clinical computed tomography and tissue microstructure using collagen fiber crimp period, which has previously been correlated with residual strain. Three bovine tail segments (levels c1 through c6) were imaged using a clinical computed tomography (CT) scanner followed by removal of muscle and harvest of IVDs. The discs were frozen, and transverse cryosections were obtained. Additionally, tangential plane cryosections were obtained from the inner and outer zones of the AF. Transverse CT slices corresponding to each joint level thresholded for both disc and muscle tissue and analyzed in MATLAB. First, the centroid of the disc image was calculated to use as an origin. Then the disc area and moments of inertia about the flexion extension axis and lateral bending axis were calculated. Total muscle area was then calculated, along with muscle moments of inertia relative to the disc centroid. All muscle parameters were normalized by those of the corresponding disc. Cryosections were imaged using an inverted light microscope equipped with crossed polarizing filters and a digital camera. A MATLAB routine was used to perform Fourier transform analysis on user selected lines of interest in the transverse micrographs, yielding average fiber crimp period in the inner and outer AF. Micrographs from tangential sections were opened in ImageJ, and fiber orientation angles were measured manually. Muscle moments of inertia were analyzed using a two-way ANOVA with disc level and axis as dependent variables. Normalized muscle area was analyzed with a one-way ANOVA with disc level as a dependent variable. A two-way ANOVA, with disc level and zone (inner versus outer) was used to analyze collagen fiber crimp period and collagen fiber angle. Normalized muscle moment of inertia showed significant effects of both level and axis (p < 0 .001), decreasing at distal levels, and being lower about the flexion-extension axis than the lateral bending axis. Normalized muscle cross section showed a visible, but not significant (p=0.0721) decreasing trend with disc level. Fiber crimp period had significant effects of both level and zone (p < 0 .001), and was significantly longer in the outer zone than inner at all levels. Significant decrease in crimp period at distal levels were seen in the outer AF, but not the inner. While fiber angle was significantly (p < 0 .001) higher in the inner AF (36±6.6°) than outer AF (24±3.5°)), there was no significant effect of level. Fiber crimp period in the AF has previously been correlated with residual circumferential strain, with larger crimp period corresponding to increased residual tension. The present study suggests that at proximal levels of the tail, where peak compressive and bending stresses in the AF (as inferred from normalized muscle area and moments of inertia respectively) are greatest, there is more accumulation of residual strain

Despite total knee arthroplasty demonstrating high levels of success, 20% of patients report dissatisfaction with their result. Wellness Stasis Socks are embedded with a proprietary pattern of neuro-receptor activation points that have been proven to activate a precise neuro-response, as according to the pattern theory of haptic perception, which stimulates improvements in pain and function. Technologies that manipulate this sensory environment, such as textured insoles, have proven to be effective in improving gait patterns in patients with knee osteoarthritis. In regard to patients undergoing TKA using this new technology may prove beneficial as an adjunct to recovery as many patients suffer from further deficits to their proprioceptive system caused by ligamentous damage and alterations to mechanoreceptors during procedure. We hypothesized that the Wellness Stasis Socks are a safe, cost-effective and easily scalable strategy to support TKA patients through their recovery. Double-blinded, placebo-controlled randomized trial. Randomization using a computer-generated program . All study coordinators, healthcare personel and patients were blinded to patient groups. All surgical procedures were conducted by the same technique and orthopaedic surgeon. Intervention group: Wellness Stasis socks containing receptor point-activation technology. Control group: indentical appearing Wellness Stasis socks without receptor point-activation technology. Sock use during the waking hours . All additional post-operative protocols remained consistent between groups including same facility physiotherapy . Additional modalities (ice machines, soft-tissue massages, acupuncture) were prohibited. WOMAC questionnaire completed at baseline, 2 weeks, and 6 weeks to assess pain, stiffness and physical function. G. *. Power software to determine minimum sample of 50 in each group. No patients were lost to follow up and all followed study protocol. Data analysis using SPSS software. P-values, effect sizes, and confidence intervals are reported to assess clinical relevance of the finding. Physical status classifications were compared using t-test. Within-subject and between-subject differences in the mean WOMAC were analyzed by ANOVA. Cramer's V statistical analysis noted that other variables of Sex, BMI, ASA classification and Age were not statistically different between the control and intervention groups. No statistical difference between groups in Preop Womac scores. The data showed a consistent improvement in Womac scores for pain and stiffness at 2 weeks post op in the interventional group over the control group. The womac scores assessing physical function showed a consistent improvement at both 2 and 6 weeks post op in the intervention group compared to the control group. There were no complications in either group associated the sock use. The intervention proved to be a low cost and safe additional intervention post operatively from TKA to help patients improve with regard to pain, stiffness and physical function. This study suggests this modality can be added to the list of other commonly used post op interventions such as cryocuffs, physiotherapy, and relaxation techniques as safe post op interventions to help patients improve post op TKA and can act as an adjunct in providing non narcotic pain control

Patients receiving reverse total shoulder arthroplasty (RTSA) often have osseous erosions because of glenohumeral arthritis, leading to increased surgical complexity. Glenoid implant fixation is a primary predictor of the success of RTSA and affects micromotion at the bone-implant interface. Augmented implants which incorporate specific geometry to address superior erosion are currently available, but the clinical outcomes of these implants are still considered short-term. The objective of this study was to investigate micromotion at the glenoid-baseplate interface for a standard, 3 mm and 6 mm lateralized baseplates, half-wedge, and full-wedge baseplates. It was hypothesized that the mechanism of load distribution from the baseplate to the glenoid will differ between implants, and these varying mechanisms will affect overall baseplate micromotion. Clinical CT scans of seven shoulders (mean age 69 years, 10°-19° glenoid inclinations) that were classified as having E2-type glenoid erosions were used to generate 3D scapula models using MIMICS image processing software (Materialise, Belgium) with a 0.75 mm mesh size. Each scapula was then repeatedly virtually reconstructed with the five implant types (standard,3mm,6mm lateralized, and half/full wedge; Fig.1) positioned in neutral version and inclination with full backside contact. The reconstructed scapulae were then imported into ABAQUS (SIMULIA, U.S.) finite element software and loads were applied simulating 15°,30°,45°,60°,75°, and 90° of abduction based on published instrumented in-vivo implant data. The micromotion normal and tangential to the bone surface, and effective load transfer area were recorded for each implant and abduction angle. A repeated measures ANOVA was used to perform statistical analysis. Maximum normal micromotion was found to be significantly less when using the standard baseplate (5±4 μm), as opposed to the full-wedge (16±7 μm, p=0.004), 3 mm lateralized (10±6 μm, p=0.017), and 6 mm lateralized (16±8 μm, p=0.007) baseplates (Fig.2). The half-wedge baseplate (11±7 μm) also produced significantly less micromotion than the full-wedge (p=0.003), and the 3 mm lateralized produced less micromotion than the full wedge (p=0.026) and 6 mm lateralized (p=0.003). Similarly, maximum tangential micromotion was found to be significantly less when using the standard baseplate (7±4 μm), as opposed to the half-wedge (12±5 μm, p=0.014), 3 mm lateralized (10±5 μm, p=0.003), and 6 mm lateralized (13±6 μm, p=0.003) baseplates (Fig.2). The full wedge (11±3 μm), half-wedge, and 3 mm lateralized baseplate also produced significantly less micromotion than the 6 mm lateralized (p=0.027, p=012, p=0.02, respectively). Both normal and tangential micromotion were highest at the 30° and 45° abduction angles (Fig.2). The effective load transfer area (ELTA) was lowest for the full wedge, followed by the half wedge, 6mm, 3mm, and standard baseplates (Fig.3) and increased with abduction angle. Glenoid baseplates with reduced lateralization and flat backside geometries resulted in the best outcomes with regards to normal and tangential micromotion. However, these types of implants are not always feasible due to the required amount of bone removal, and medialization of the bone-implant interface. Future work should study the acceptable levels of bone removal for patients with E-type glenoid erosion and the corresponding best implant selections for such cases. For any figures or tables, please contact the authors directly

Large cartilage lesions in younger patients can be treated by fresh osteochondral allograft transplantation, a surgical technique that relies on stable initial fixation and a minimum chondrocyte viability of 70% in the donor tissue to be successful. The Missouri Osteochondral Allograft Preservation System (MOPS) may extend the time when stored osteochondral tissues remain viable. This study aimed to provide an independent evaluation of MOPS storage by evaluating chondrocyte viability, chondrocyte metabolism, and the cartilage extracellular matrix using an ovine model. Femoral condyles from twelve female Arcott sheep (6 years, 70 ± 15 kg) were assigned to storage times of 0 (control), 14, 28, or 56 days. Sheep were assigned to standard of care [SOC, Lactated Ringer's solution, cefazolin (1 g/L), bacitracin (50,000 U/L), 4°C storage] or MOPS [proprietary media, 22-25°C storage]. Samples underwent weekly media changes. Chondrocyte viability was assessed using Calcein AM/Ethidium Homodimer and reported as percent live cells and viable cell density (VCD). Metabolism was evaluated with the Alamar blue assay and reported as Relative Fluorescent Units (RFU)/mg. Electromechanical properties were measured with the Arthro-BST, a device used to non-destructively compress cartilage and calculate a quantitative parameter (QP) that is inversely proportional to stiffness. Proteoglycan content was quantified using the dimethylmethylene blue assay of digested cartilage and distribution visualized by Safranin-O/Fast Green staining of histological sections. A two-way ANOVA and Tukey's post hoc were performed. Compared to controls, MOPS samples had fewer live cells (p=0.0002) and lower VCD (p=0.0004) after 56 days of storage, while SOC samples had fewer live cells (p=0.0004, 28 days; p=0.0002, 56 days) and lower VCD (p=0.0002, 28 days; p=0.0001, 56 days) after both 28 and 56 days (Table 1). At 14 days, the percentage of viable cells in SOC samples were statistically the same as controls but VCD was lower (p=0.0197). Cell metabolism in MOPS samples remained the same over the study duration but SOC had lower RFU/mg after 28 (p=0.0005) and 56 (p=0.0001) days in storage compared to controls. These data show that MOPS maintained viability up to 28 days yet metabolism was sustained for 56 days, suggesting that the conditions provided by MOPS storage allowed fewer cells to achieve the same metabolic levels as fresh cartilage. Electromechanical QP measurements revealed no differences between storage methods at any individual time point. QP data could not be used to interpret changes over time because a mix of medial and lateral condyles were used and they have intrinsically different properties. Proteoglycan content in MOPS samples remained the same over time but SOC was significantly lower after 56 days (p=0.0086) compared to controls. Safranin-O/Fast Green showed proteoglycan diminished gradually beginning at the articular surface and progressing towards bone in SOC samples, while MOPS maintained proteoglycan over the study duration (Figure 1). MOPS exhibited superior viability, metabolic activity and proteoglycan retention compared to SOC, but did not maintain viability for 56 days. Elucidating the effects of prolonged MOPS storage on cartilage properties supports efforts to increase the supply of fresh osteochondral allografts for clinical use. For any figures or tables, please contact the authors directly

Ulnocarpal impaction (UCI) is a common cause of ulnar-sided wrist pain. UCI typically occurs in wrists with positive ulnar variance, which causes altered loading mechanics between the ulnar head, lunate and triquetrum. However, many individuals with positive ulnar variance never develop UCI, and some with neutral or negative ulnar variance do experience UCI. This suggests that other variables contribute to the development of UCI. Suspected culprits include lunate morphology, and dynamic changes with loaded (grip) pronation. If these anatomic variations are contributing to UCI, we expect them to influence functional impairment scores. Therefore, the objective of this study was to evaluate the relationship between radiographic parameters and pre-surgical upper extremity patient-rated outcomes scores (PROS) in patients with a diagnosis of UCI. Retrospective cohort study of patients undergoing ulnar shortening osteotomy or arthroscopic wafer procedure for UCI. Data derived from prospectively collected departmental database that captured demographic, clinical, functional and radiographic information. Radiographic parameters evaluated were: lunate morphology [presence vs. absence of hamate facet; Antuna-Zapico (A-Z) classification], and dynamic changes on grip view [difference in lunate-ulnar head distance (LUD); difference in lunate uncovering index (LUI)]. PROS assessed were QuickDASH and Patient-Rated Wrist Evaluation (PRWE) scores, collected at patient enrolment. ANOVA was used to assess for differences in PROS between A-Z classification groups. Student's t-test was used to assess for differences in PROS based on presence/absence of a hamate facet. Regression analysis evaluated a relationship between change in LUD with grip and PROS, and change in LUI with grip and PROS. Preliminary analysis included 23 wrists, with a mean patient age of 48.9 years [standard deviation (SD) 14.5 years]. Forty-eight percent were male, and the dominant limb was involved in 52.2% of cases. Average QuickDASH and PRWE scores at enrolment were 50.9 (SD 22.2) and 62.2 (SD 22.0), respectively. Assessment of radiographs revealed 17 patients (73.9%) without a hamate facet. Five patients (21.7%) had A-Z Type I lunate morphology, and nine (39.1%) had Type II and Type III morphology, respectively. ANOVA revealed no differences in enrolment QuickDASH (p = 0.185) or PRWE (p = 0.256) scores between A-Z classification groups. Similarly, Student's t-test found no difference based on presence/absence of a hamate facet (QuickDASH p = 0.594; PRWE p = 0.573). Regression analysis revealed no relationship between change in LUD with grip and PROS (QuickDash R2 = 0.020, p = 0.619; PRWE R2 = 0.009, p = 0.733), and no relationship between change in LUI with grip and PROS (QuickDash R2 = 0.000, p = 0.913; PRWE R2 = 0.010, p = 0.722). Preliminary results suggest no relationship between A-Z classification lunate morphology, presence/absence of a hamate facet, change in LUD, or change in LUI and pre-surgical PROS. It is unclear if our findings represent the true relationship between these radiographic parameters and PROS, or reflect our preliminary sample size. Data analysis is ongoing to add clarity to this question

Aim. A growing number of recent investigations on the human genome, gut microbiome, and proteomics suggests that the loss of mucosal barrier function, particularly in the gastrointestinal tract, may substantially affect antigen trafficking, ultimately influencing the close bidirectional interaction between the gut microbiome and the immune system. This cross-talk is highly influential in shaping the host immune system function and ultimately shifting genetic predisposition to clinical outcome. Therefore, we hypothesized that a similar interaction could affect the occurrence of acute and chronic periprosthetic joint infections (PJI). Method. Multiple biomarkers of gut barrier disruption were tested in parallel in plasma samples collected as part of a prospective cohort study of patients undergoing revision arthroplasty for aseptic or PJI (As defined by the 2018 ICM criteria). All blood samples were collected before any antibiotic was administered. Samples were tested for Zonulin, soluble CD14 (sCD14), and lipopolysaccharide (LPS) using commercially available enzyme-linked immunosorbent assays. Statistical analysis consisted of descriptive statistics and ANOVA. Results. A total of 96 patients were consented and included in the study. 32 were classified as PJI (23 chronic and 9 acute), and 64 as aseptic. Both Zonulin and LPS were found to be increased in the acute PJI group 8.448 ± 7.726 ng/mL and 4.106 ± 4.260 u/mL, compared to chronic PJI (p<0.001) and aseptic revisions (p=0.025). sCD14 was found to be increased in both chronic (0.463 ± 0.168 ug/mL) and acute PJI (0.463 ± 0.389 ug/mL) compared to aseptic revisions (p<0.001). Conclusions. This prospective ongoing study reveals a possible link between gut permeability and the ‘gut-immune-joint axis’ in PJI. If this association continues to be born out with larger cohort recruitment, it would have a massive implication in managing patients with PJI. In addition to the administration of antimicrobials, patients with PJI and other orthopedic infections may require gastrointestinal modulators such as pro and prebiotics

Aim. This study assesses the ability of the JS-BACH classification of bone infection to predict clinical and patient-reported outcomes in prosthetic joint infection (PJI). Method. Patients who received surgery for suspected PJI at two specialist bone infection centres within the UK between 2010 and 2015 were classified using the JS-BACH classification into either ‘uncomplicated’, ‘complex’ or ‘limited options’. All patients were classified by two clinicians blinded to outcome, with any discrepancies adjudicated by a third reviewer. At the most recent follow-up, patients were assessed for (i) any episode of recurrence since the index operation and (ii) the status of the joint. A Cox proportional-hazard model assessed significant predictors of recurrence following the index procedure. Patient-reported outcomes included the EuroQol EQ-5D-3L index score and the EQ-visual analogue score (VAS) at 0, 14, 42, 120 and 365 days following the index operation. Results. 220 patients met the inclusion criteria during the study period which included PJI of the knee (n=111), hip (n=102), shoulder (n=4) and elbow (n=3). The median time to final follow-up was 4.7 years (inter-quartile range 2.7 – 6.7 years). Controlling for type of index procedure and site of infection, Cox proportional-hazards ratio of recurrence when being classified as complex versus uncomplicated was 25.2 (95% CI 3.45 – 183.7, p<0.001) and having limited options verses uncomplicated was 59.0 (95% CI 7.93 – 439.1, p<0.001). None of the patients who were classified as ‘uncomplicated’ PJI (0/52) had received either amputation, joint fusion, excision arthroplasty, chronic suppressive anti-biotics, had died from sepsis secondary to PJI or were awaiting treatment for an active infection at final follow-up. This compared to 21.3% (27/127) of patients classified as ‘complex’ PJI and 65.9% (27/41) of patients classified as ‘limited options’. Compared to the age-matched population, patients with ‘uncomplicated’ PJI reported similar EQ-index scores (age-matched population: 0.782, ‘uncomplicated’: 0.730, SD 0.326) and EQ-VAS (age-matched: 77.9, ‘uncomplicated’ PJI: 79.4, SD 20.9). This was significantly higher when compared to patients classified as ‘complex’ (EQ-index: 0.515 SD 0.323, p<0.012; EQ-VAS: 68.4 SD 19.4, p=0.042) and ‘limited options’ (EQ-index: 0.333 SD 0.383, p<0.001; EQ-VAS: 60.2, SD 23.1, p=0.005, ANOVA with Tukey post-hoc comparison). Conclusions. We have demonstrated that the JS-BACH classification for bone and joint infection is a significant predictor of clinical outcome and quality of life following surgery for PJI. This will allow clinicians to offer prognostic information to patients and guide the timing of referral for specialist management in PJI

Multiple studies have shown that the symptomatology of knee osteoarthritis weakly correlate to radiographic severity of disease. Current literature however does not have much in the way of comparing functional outcomes of those with OA knees with radiographic severity. Our objective was to compare radiographic measurements of OA knees with self-reported functional outcomes and determine if radiographic severity of OA knees correlated with loss of functional ability. A retrospective review of prospectively collected registry data of 305 patients with osteoarthritis of the knee was collected. The patient's x-rays were reviewed, and radiographic measurements were taken to include medial, lateral and patellofemoral joint space distance measured in millimetres. The Kellgren and Lawrence, and Ahlback classifications of radiographic knee OA were computed. These were correlated with severity of functional limitations was measured using the SF36, Knee society score (KSS) and Oxford knee scores. Statistical analysis were conducted with SPSS V22.0 statistical software. Demographic characteristics and functional assessments were analysed using one way ANOVA test. Post-hoc test using Tukey HSD and effect size (partial-eta squared η. 2. ) was performed if one-way ANOVA was found to be statistically significant. A p-value of 0.05 or less was considered statistically significant. Pre-operative patient demographics are shown in table 1. Patients in with Grade 2 osteoarthritis were significantly younger than Grade 4 patients (post-hoc p=0.003). There were no statistically significant differences in age between the other Grades, and there were no differences in BMI or gender or operative site between all grades. There were significant differences in KSS Function scores between Grade 2 and Grade 3 patients (post-hoc p=0.017) and Grade 2 and 4 patients (post-hoc p < 0 .001). Statistically significant differences were also found between Grade 1 and Grade 4 patients for the KSS Knee score (post-hoc p=0.016). There were significant differences in Oxford knee score (post-hoc p=0.026) and SF- Physical Function (post-hoc p < 0 .001) between Grade 2 and Grade 4 patients too. The effect size η. 2. for KSS Function, KSS Knee and Oxford knee score was 0.05, 0.06 and 0.33 respectively. When comparing the loss of joint space with the functional scores, there were no statistically significant correlations. Our study show that the radiological severity of knee osteoarthritis based on the two scoring methods was able to correlate with worsening functional scores. Most notably, the differences in KSS function scores correlated strongly between Grade 2 and Grade 3 patients. Of note, there was no correlation between the loss of joint space and the severity of functional limitations across any of the scoring systems. Our study showed that although both the Kellgren and Lawrence and Ahlback radiological grading of Osteoarthritis were able to correlate with worsening functional scores, this was not due to loss of joint space alone and further studies need to be conducted on the other contributors to the scoring system such as osteophytes and subchondral sclerosis. Our study show that the radiological severity of knee osteoarthritis based on the two scoring methods was able to correlate with worsening functional scores. Most notably, the differences in KSS function scores correlated strongly between Grade 2 and Grade 3 patients. Of note, there was no correlation between the loss of joint space and the severity of functional limitations across any of the scoring systems. Our study showed that although both the Kellgren and Lawrence and Ahlback radiological grading of Osteoarthritis were able to correlate with worsening functional scores, this was not due to loss of joint space alone and further studies need to be conducted on the other contributors to the scoring system such as osteophytes and subchondral sclerosis. For any figures or tables, please contact authors directly

Outsourcing elective surgery has become increasingly commonplace to meet increasing demand from a growing & aging population. There is concern that outsourcing was influencing the nature of residual workload that was unsuitable for treatment elsewhere. This led to the impression that our unit is operating on more complex patients orthopaedic problems, ASA and Body Mass Index (BMI). By losing a disproportionate number of straightforward patients our department's outcomes, productivity and training opportunities could be adversely affected. Retrospective analysis of prospectively collected data of primary hip / knee arthroplasties between July & December for 2014(pre-outsourcing), 2015 and 2016(post-outsourcing). ANOVA, Tukey Honest Significant Difference(HSD) and Pearson's correlation used. Total of 726 primary arthroplasties were performed with an almost 50 % reduction post outsourcing. Post-outsourcing, BMI and ASA were significantly worse with a ANOVA of p=0.001 and HSD p=0.003. Length of stay increased from 5.4 days in 2014 to 6.2 days in 2015 ANOVA p< 0.001 but decreased in 2016. BMI significantly affected operating time (Pearson's r =0.12, p< 0.05) and anaesthetic time (Pearson's r =0.19, p< 0.05). ASA significantly affected length of hospital stay, p< 0.01 and operation time, p=0.007 but no effect on anaesthetic time. In conclusion, we are operating on more complex patients due to current outsourcing setup. Implications for short-term were on anaesthetic and operation time, inpatient stay and training opportunity were affected, with possible long-term implications on individual surgeon and unit outcomes (complications, patient satisfaction)

INTRODUCTION. The Dorr Bone Classification, devised in 1993 is commonly used to categorize bone types prior to hip reconstruction. The purpose of the present study is to quantify the Dorr classification system using 4 morphologic parameters – morphologic cortical index (MCI), canal-flare index (CFI), canal-bone ratio (CBR), and canal-calcar ratio (CCR). METHODS. 816 hips were reviewed. Demographic data reviewed includes age, sex, and laterality. Each hip was reviewed by 2 separate evaluators for Dorr classification. The MCI, CCR, CBR, and CFI were calculated for each hip on anteroposterior radiographs (Fig 1). One-way ANOVA statistical analysis was used to examine if there are mean differences for each measurement. IRB approval was obtained before collection of data. RESULTS. The average age of patients was 61 (range 20–96). There were 367 left hips and 449 right hips. The prevalence of Dorr A was 45.8%. The prevalence of Dorr B bone was 38.9% and of Dorr C bone was 15.3%. One-way ANOVA analysis confirmed the mean differences for each measurement. Measurements of the MCI, CCR, CBR, and CFI were statistically significantly different between the three types of bone. The MCI and CFI were significantly higher in Type A than Type B and higher in Type B than Type C. The CBR and CCR were significantly lower in Type A than Type B and lower in Type B than Type C. DISCUSSION. To our knowledge, the present study is the first to attempt to quantify the Dorr Bone classification system using MCI, CCR, CBR, and CFI using a large series of patients. Classification of the proximal femur geometry is important as it may play a role in implant fixation for patients undergoing total hip arthroplasty (THA). Furthermore, this information can be used to guide future implant choices

Introduction. The functional ante-inclination (AI) of the cup after total hip arthroplasty (THA) is a key component in the combined sagittal index (CSI) to predict joint stability after THA. To accurately predict AI, we deducted a mathematic algorithm between the radiographic anteversion (RA), radiographic inclincation (RI), pelvic tilting (PT), and AI. The current study aims (1) to validate the mathematic algorithm; (2) to convert the AI limits in the CSI index (standing AI ≤ 45°, sitting AI ≥ 41°) into coronal functional safe zone (CFSZ) and explore the influences of the stand-to-sit pelvic motion (PM) and pelvic incidence (PI) on CFSZ; (3) to locate a universal cup orientation that always fulfill the AI criteria of CSI safe zone for all patients or subgroups of PM(PM ≤ 10°, 10° < PM ≤ 30°, and PM > 30°) and PI (PI≤ 41°, 41°< PI ≤ 62°, and PI >62°), respectively. Methods. A 3D printed phantom pelvic model was designed to simulate changing PT values. An acetabular cup was implanted with different RA, RI, and PT settings using robot assisted technique. We enrolled 100 consecutive patients who underwent robot assisted THA from April, 2019 to June, 2019 in our hospital. EOS images before THA and at 6-month follow-up were collected. AI angles were measured on the lateral view radiographs as the reference method. Mean absolute error (MAE), Bland-Altman analysis and linear regression were conducted to assess the accuracy of the AI algorithm for both the phantom and patient radiographic studies. The 100 patients were classified into three subgroups by PM and PI, respectively. Linear regression and ANOVA analysis were conducted to explore the relationship between the size of CFSZ, and PM and PI, respectively. Intersection of the CFSZ was conducted to identify if any universal cup orientation (RA, RI) existed for the CSI index. Results. The mathematic algorithm for calculating AI based on RI, RA, and PT is highly accurate according to the phantom and patient radiographic study. CFSZ size corresponds linearly with PM (R² = 0.638) and PI (R² = 0.129), respectively. There are significant differences in the size of CFSZ, as well as in the intersection of CFSZ and LSZ, between the subgroups of PM and PI, respectively (P<0.017). There is no universal cup orientations could be identified to fulfill the AI limits of the CSI index for all the 100 patients or any of the three subgroups, according to either PM or PI. Conclusions. The cup target orientation should be individualized. The validated algorithm between AI and RA, RI, and PT parameters can serve as the quantitative tool for patient-specific optimization of functional cup AI in different postures

Frailty has been shown to be a risk predictor for peri-operative adverse events (AEs) in patients undergoing various type of spine surgery. However, its relationship with Patient Related Outcome Measures (PROMS) remains unknown. The primary objective of this study was to determine the impact of frailty on PROMS in patients undergoing surgery for thoraco-lumbar degenerative conditions. The secondary objective was to determine the association between frailty and baseline PROMS. This is a retrospective study of a prospective cohort of patients >55 years old who underwent surgery between 2012 and 2018. Patient data and PROMS (EQ-5D, SF-12, ODI, back and leg pain NRS) were extracted from the Canadian Spine Outcomes and Research Network registry for a single academic centre. Frailty was retrospectively calculated using the modified frailty index (mFI) and patient were classified as frail, pre-frail and non-frail. Patient characteristics and outcomes were analyzed using ANOVA or Kruskal-Wallis test for continuous variables and Chi square or Fisher's exact test for proportions. A generalized estimating equations (GEEs) regression model was used to assess the association between patients' baseline frailty status and PROMs measures at three and 12 months. 293 patients were included with a mean age of 67 ± 7 years. Twenty-two percent of the patients (n= 65) were frail, 59 % (n=172) were pre-frail and 19% (n=56) were non-frail. At baseline, the three groups had similar PROMS, except for the PCS which was worse in the frail group (mean difference [95% CI], −4.9 [−8.6;-1.1], p= 0.0083). The improvement in the EQ-5D, PCS, MCS, ODI, back and leg pain NRS scores was not significantly different between the three groups (p> 0.05). The was no difference in the evolution of the PROMS at three and 12 months between the three groups (p> 0.05). Although frailty is a known predictor of AEs, it does not predict worse PROMS after spine surgery in that population. At baseline, non-frail, pre-frail and frail patients have similar PROMS

Normal digital flexion relies on flexor tendon pulleys to transmit linear muscular force to angular digital motion. Despite the critical role these pulleys play, there is a growing trend among surgeons to partially sacrifice or “vent” them during flexor tendon repair to improve surgical exposure. Although this new practice is reported to improve outcomes after flexor tendon repair, there is concern for the long-term effects of bowstringing, reduced finger range of motion (ROM) and altered tendon biomechanics. The objective of this study was to examine the effects of the application of a thermoplastic ring, acting as an “external” pulley, on flexor tendon biomechanics and finger ROM. We hypothesized that the application of an external thermoplastic ring would produce a centripetal force over the tendon to reduce bowstringing, improve finger ROM, and restore tendon loads following pulley venting. Twelve digits comprised of the index, long, and ring fingers from four cadaveric specimens were tested using a novel in-vitro active finger motion simulator. Servo-motors were used to generate motion. Loads induced by flexor digitorum superficialis (FDS) and flexor digitorum profundus (FDP), and joint range of motion were measured with each sequential sectioning of the A2, A3, and A4 flexor pulley, in comparison to a native healthy finger condition. At each finger condition, A2 and A4 external thermoplastic pulley rings were applied over the proximal phalanx and middle phalanx, respectively, to recreate A2 and A4 function. Results were recorded and analyzed using a one way repeated-measures ANOVA. Following venting of the A2, A3 and A4 pulley, proximal interphalangeal joint (PIPJ) ROM significantly decreased by 17.02 ± 8.42 degrees and distal interphalangeal joint (DIPJ) range of motion decreased by 17.25 ± 8.68 degrees compared to intact pulleys. Application of the external rings restored range of motion to within 8.14 ± 8.17 degrees at the PIPJ and to within 7.72 ± 8.95 degrees at the DIPJ. Similarly, pulley venting resulted in a 36% reduction in FDS load and 50% in FDP load compared to intact pulleys. Following application of the external rings, loads were almost restored to normal at 7% reduction for FDS load and 13% reduction for FDP load. Venting of flexor tendon pulleys significantly alters flexor tendon biomechanics and digit range of motion. The application of thermoplastic rings acting as external pulleys over the proximal and middle phalanges is an effective, inexpensive, non-invasive and reproducible therapeutic method to restore flexor tendon biomechanics and digit range of motion

Introduction. There is debate regarding whether the use of computer-assisted technology, such as navigation and robotics, has any benefit on clinical or patient reported outcomes following total knee arthroplasty (TKA). This study aims to report on the association between intraoperative use of technology and outcomes in patients who underwent primary TKA. Methods. We retrospectively reviewed 7,096 patients who underwent primary TKA from 2016–2020. Patients were stratified depending on the technology utilized intraoperatively: navigation, robotics, or no technology. Patient demographics, clinical data, Forgotten Joint Score-12 (FJS), and Knee injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS, JR) were collected at various time points up to 1-year follow-up. Demographic differences were assessed with chi-square and ANOVA tests. Clinical data and mean FJS and KOOS, JR scores were compared using univariate ANCOVA, controlling for demographic differences. Results. During the study period, 287 (4%) navigation, 367 (5%) robotics, and 6,442 (91%) manual cases were performed. Surgical time significantly differed between the three groups (113.33 vs. 117.44 vs. 102.11 respectively; p<0.001). Discharge disposition significantly differed between the three groups (p<0.001), with a greater percentage of patients who underwent manual TKA discharged to a skilled nursing facility (12% vs. 8% vs. 15%; p<0.001) than those who had intraoperative technology utilized. FJS scores did not statistically differ at 3-months (p=0.067) and 1-year (p=0.221) postoperatively. There was a significant statistical difference in three-month KOOS, JR scores (59.48 vs. 60.10 vs. 63.64; p=0.001); however, one-year scores did not statistically differ between the three groups (p=0.320). Mean improvement in KOOS, JR scores preoperatively to one-year postoperatively was significantly largest for the navigation group and least for robotics (27.12 vs. 23.78 vs. 25.42; p<0.001). Conclusion. This study demonstrates shorter mean operative time in cases with no utilization of technology and clinically similar patient reported outcome scores associated with TKAs performed between all modalities. While the use of intraoperative technology may aid surgeons, it has not currently translated to better short-term patient outcomes

Introduction. The use of technology, such as navigation and robotic systems, may improve the accuracy of component positioning in total hip arthroplasty (THA) but its impact on patient reported outcomes measures (PROMs) remains unclear. This study aims to identify the association between intraoperative use of technology and patient reported outcomes measures (PROMs) in patients who underwent primary total hip arthroplasty (THA). Methods. We retrospectively reviewed patients who underwent primary THA between 2016 and 2020 and answered a post-operative PROM questionnaire. Patients were separated into three groups depending on the technology utilized intraoperatively: navigation, robotics, or no technology (i.e. manual THA. The Forgotten Joint Score (FJS-12) and Hip Disability and Osteoarthritis Outcome Score, Joint Replacement (HOOS, JR) were collected at various time points (FJS: 3m, 1y, and 2y; HOOS, JR: pre-operatively, 3m, and 1y). Demographic differences were assessed with chi-square and ANOVA. Mean scores between all groups were compared using univariate ANCOVA, controlling for observed demographic differences. Results. Of the 1,960 cases included, 896 navigation, 135 robotics, and 929 manual. There was a significant statistical difference in one-year HOOS, JR scores (85.23 vs. 85.95 vs. 86.76; p=0.014) and two-year FJS-12 scores (64.72 vs. 73.35 vs. 74.63; p=0.004) between the three groups. However, they did not exceed the mean clinically important difference (MCID) at any time period. Short and long-term PROMs significantly differed between navigation and manually performed cases (FJS 3m: p=0.047; FJS 2y: p=0.001; HOOS, JR 1y: p=0.004). Two-year FJS-12 scores statistically differed between navigation and robotics (p=0.038). There was no statistical difference in either FJS-12 or HOOS, JR scores between robotics and manual THA groups at all time points (FJS 3m:p=0.076, 1y:p=0.225, 2y:p=0.793; HOOS, JR preop:p=0.872, 3m:p=0.644, 1y:p=0.531). Conclusion. Statistical differences observed between all modalities are not likely to be clinically meaningful with regards to early patient reported outcomes. While intraoperative use of technology may improve the accuracy of implant placement, these modalities have not necessarily translated into improved early reported functional outcomes

Background. Stemless prostheses are recognized to be an effective solution for anatomic total shoulder arthroplasty (TSA) while providing bone preservation and shortest operating time. Reverse shoulder arthroplasty (RSA) with stemless has not showed the same effectiveness, as clinical and biomechanical performances strongly depend on the design. The main concern is related to stability and bone response due to the changed biomechanical conditions; few studies have analyzed these effects in anatomic designs through Finite Element Analysis (FEA), however there is currently no study analyzing the reverse configuration. Additionally, most of the studies do not consider the effect of changing the neck-shaft angle (NSA) resection of the humerus nor the proper assignment of spatial bone properties to the bone models used in the simulations. The aim of this FEA study is to analyze bone response and primary stability of the SMR Stemless prosthesis in reverse with two different NSA cuts and two different reverse angled liners, in bone models with properties assigned using a quantitative computed tomography (QCT) methodology. Methods. Sixteen fresh-frozen cadaveric humeri were modelled using the QCT-based finite element methodology. The humeri were CT-scanned with a hydroxyapatite phantom to allow spatial bone properties assignment [Fig. 1]. Two implanted SMR stemless reverse configurations were considered for each humerus: a 150°-NSA cut with a 0° liner and a 135°-NSA cut with a 7° sloped liner [Fig. 2]. A 105° abduction loading condition was simulated on both the implanted reverse models and the intact (anatomic) humerus; load components were derived from previous dynamic biomechanical simulations on RSA implants for the implanted stemless models and from the OrthoLoad database for the intact humeri. The postoperative bone volume expected to resorb or remodel [Fig. 3a] in the implanted humeri were compared with their intact models in sixteen metaphyseal regions of interest (four 5-mm thick layers parallel to the resection and four anatomical quadrants) by means of a three-way repeated measures ANOVA followed by post hoc tests with Bonferroni correction. In order to evaluate primary stability, micromotions at the bone-Trabecular Titanium interface [Fig. 3b] were compared between the two configurations using a Wilcoxon matched-pairs signed-rank test. The significance level α was set to 0.05. Results. With the exception of the most proximal layer (0.0 – 5.0 mm), the 150°-NSA configuration showed overall a statistically significant lower bone volume expected to resorb (p = 0.011). In terms of bone remodelling, the 150°-NSA configuration had again a better response, but fewer statistically significant differences were found. Regarding micromotions, there was a median decrease (Mdn = 3.2 μm) for the 135°-NSA configuration (Mdn = 40.3 μm) with respect to the 150°-NSA configuration (Mdn = 43.5 μm) but this difference was non-significant (p = 0.464). Conclusions. For the analyzed SMR Stemless configurations, these results suggest a reduction in the risk of bone resorption when a 0° liner is implanted with the humerus cut at 150°. The used QCT-based methodology will allow further investigation, as this study was limited to one single design and load case. For any figures or tables, please contact the authors directly

Patients undergoing revision surgery of a primary total hip arthroplasty often exhibit bone loss and poor bone quality, which make achieving stable fixation and osseointegration challenging. Implant components coated in porous metals are used clinically to improve mechanical stability and encourage bone in-growth. We compared ultra-porous titanium coatings, known commercially as Gription and Porocoat, in an intra-articular model by press-fitting coated cylindrical implants into ovine femoral condyles and evaluating bone in-growth and fixation strength 4, 8 and 16 weeks post-operatively. Bilateral surgery using a mini-arthrotomy approach was performed on twenty-four Dorset-Rideau Arcott rams (3.4 ± 0.8 years old, 84.8 ± 9.3 kg) with Institutional Animal Care Committee approval in accordance with the Canadian Council on Animal Care. Cylindrical implants, 6.2 mm in diameter by 10 mm in length with surface radius of curvature of 35 mm, were composed of a titanium substrate coated in either Porocoat or Gription and press-fit into 6 mm diameter recipient holes in the weight-bearing regions of the medial (MFC) and lateral (LFC) femoral condyles. Each sheep received 4 implants; two Gription in one stifle (knee) and two Porocoat in the contralateral joint. Biomechanical push-out tests (Instron ElectroPuls E10000) were performed on LFCs, where implants were pushed out relative to the condyle at a rate of 2 mm/min. Force and displacement data were used to calculate force and displacement at failure, stiffness, energy, stress, strain, elastic modulus, and toughness. MFCs were fixed in 70% ethanol, processed undecalcified, and polished sections, approximately 70 µm thick (Exakt Micro Grinding system) were carbon-coated. Backscattered electron images were collected on a scanning electron microscope (Hitachi SU3500) at 5 kV and working distance of 5 mm. Bone in-growth within the porous coating was quantified using software (ImageJ). Statistical comparisons were made using a two-way ANOVA and Fisher's LSD post-hoc test (Statistica v.8). Biomechanical evaluation of the bone-implant interface revealed that by 16 weeks, Gription-coated implants exhibited higher force (2455±1362 N vs. 1002±1466 N, p=0.046) and stress (12.60±6.99 MPa vs. 5.14±7.53 MPa, p=0.046) at failure, and trended towards higher stiffness (11510±7645 N/mm vs. 5010±8374 N/mm, p=.061) and modulus of elasticity (591±392 MPa vs. 256±431 MPa, p=0.61). Similarly, by 16 weeks, bone in-growth in Gription-coated implants was approximately double that measured in Porocoat (6.73±3.86 % vs. 3.22±1.52 %, p=0.045). No statistically significant differences were detected at either 4 nor 8 weeks, however, qualitative observations of the exposed bone-implant interface, made following push-out testing, showed more bony material consistently adhered to Gription compared to Porocoat at all three time points. High variability is attributed to implant placement, resulting from the small visual window afforded during surgery, unique curvatures of the condyles, and presence of the extensor digitorum longus tendon which limited access to the LFC. Ultra-porous titanium coatings, know commercially as Gription and Porocoat, were compared for the first time in a challenging intra-articular ovine model. Gription provided superior fixation strength and bone in-growth, suggesting it may be beneficial in hip replacement surgeries where bone stock quality and quantity may be compromised