Advertisement for orthosearch.org.uk
Results 1 - 6 of 6
Results per page:
Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 30 - 30
1 Jun 2012
Roche M Horowitz S Conditt M
Full Access

Introduction

Clinical outcomes of UKA procedures are sensitive to malalignment of the components, and thus show significant variability in the literature. A new robotic procedure addresses isolated medial compartment osteoarthritis with the classic indications of UKA. Using precision planning through patient specific 3D modeling and reconstruction, a robotic arm gives the surgeon control of resurfacing the knee joint, allowing for consistent precision according to the previously chosen plan. Through the precise preparation of bone surfaces and inter-component alignment, this procedure is designed to significantly increase accuracy and decrease mal-alignment, thus increasing post-operative physical and function outcomes. This paper evaluates four year clinical outcomes of this novel surgical procedure.

Methods

The first seventy-three (42 male, 31 female) patients (average age: 71 ±10yrs) to receive a robotically assisted UKA enrolled in an IRB approved outcomes registry. Eleven patients were four years post operative and sixty-two patients were three years post operative at the time of the study. The average follow ups were 45 months and 35 months, respectively (range: 30 to 47 months). The tibial component for all patients was an all-poly inlay design.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 259 - 259
1 Jun 2012
Yildirim G Walker P Conditt M Horowitz S Madrid I
Full Access

Introduction

The MAKO Surgical Rio Robotic Arm utilizes the pre-op CT images to plan positioning of the uni-condylar and patella-femoral components in order to achieve the most desirable kinematics for the knee joint. We hypothesize that the anatomic matching surfaces and the cruciate retaining design of the Restoris knee will best replicate normal knee kinematics. We tested the healthy cadaveric knee versus the MAKO knee and the most common TKR designs in order to evaluate and compare the kinematic properties.

Methods

Six healthy male left knees were dissected to leave only the knee capsule and the quadriceps tendon intact. The femur and the tibia were cut 20cm from the joint line and potted with cement into a metal housing. The knee was attached to a crouching machine capable of moving the knee joint though its normal human kinematics from extension to maximum flexion, validated in previous studies. Forces applied to the quadriceps tendon allowed the knee to flex and extend physiologically, and springs attached to the posterior were substituted as the hamstrings at a rate of half the force exerted by the quadriceps as shown in the literature. Three dimensional visual targets attached to the bones were tracked by computer software capable of recreating the positions of the bones in any given flexion angle. A cruciate retaining and posterior stabilized TKR design were chosen to represent the TKRs most commonly available in the market today. The intact knee, MAKO implanted knee, CR and PS TKR designs were tested in sequence on the same specimens. The computer software analyzed the normal distance between the bone surfaces and plotted the locations of contact which could then be quantitatively compared for each given scenario [Fig. 1].


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 254 - 254
1 Jun 2012
Velyvis J Coon T Roche M Kreuzer S Horowitz S Jamieson M Conditt M
Full Access

Introduction

Bicompartmental osteoarthritis involving the medial tibiofemoral and the patellofemoral compartments is often treated with total knee replacement. Improved implants and surgical techniques have led to renewed interest in bicompartmental arthroplasty. This study evaluates the radiographic and early clinical results of bicompartmental arthroplasty with separate unlinked components implanted with the assistance of a robotic surgical arm. In addition, we examine the amount of bone resected using unlinked bicompartmental components compared to total knee replacement. Finally, a retrospective review of total knee cases examines the applicability of this early intervention procedure.

Methods

97 patients received simultaneous but geometrically separate medial tibiofemoral and patellofemoral arthroplasties with implants specifically designed to take advantage of a new bone and tissue sparing implantation technique using haptic robotics. These patients came from four surgeons at four different hospitals. The average follow-up was 9 months. Pre- and post-operative radiographs were taken. ROM, KSS and WOMAC scores were recorded. The patients had an average age of 67 yrs (range: 45-95), BMI of 29 ± 4kg/m2. 47% of the patients were male.

We retrospectively reviewed pre and post operative notes from 406 consecutive TKA patients from a single surgeon. Intraoperative data included the integrity of the three compartments and the ACL.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 450 - 450
1 Nov 2011
Roche M Horowitz S Conditt MA
Full Access

Clinical outcomes of UKA procedures are sensitive to malalignment of the components, and thus show significant variability in the literature. This study evaluates the two year clinical results of a new surgical procedure designed to significantly increase the accuracy and precision of the alignment of the components, and thus increase postoperative functional outcomes.

A new UKA technique has been developed, which combines tactile guided robotic technology with image guided surgery. Three-dimensional planning of the implant positioning is followed by precise resection of the bony surfaces. To date, 73 (42 male, 31 female) patients (average age: 70±10yrs) are 2 years postoperative with all patients enrolled in an IRB approved outcomes registry. The tibial component was an allpoly inlay design.

At two year followup, all patients showed significant improvements, compared to pre-operative values, in Knee Society Knee (p< 0.0001) and Function (p< 0.0001) scores, sf-12 PCS scores (p< 0.0001), WOMAC total scores (p< 0.0001) and WOMAC pain (p< 0.0001), stiffness (p< 0.0001) and physical function (p< 0.0001) subscores. The tibial components of two patients have been revised to a standard metal backed onlay UKA for loosening.

This initial series of robotically guided UKA implantations provided significant improvement in the postoperative function of patients in every functional measurement with only two revisions to date, likely for improper patient selection. These patients were revised to standard UKA components. The introduction of new procedures and technologies in medicine is routinely fraught with issues associated with learning curves and unanticipated pitfalls. Because the explicit objectives of this novel technology are to optimize surgical procedures to provide more safe and more reliable outcomes, these favorable results provide the potential for significant improvements in orthopedic surgery.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 428 - 428
1 Nov 2011
Coon TM Driscoll MD Horowitz S Conditt MA
Full Access

Successful clinical outcomes following unicompartmental knee arthroplasty (UKA) depend on accurate component alignment, which can be difficult to achieve using manual instrumentation. A new technology has been developed using haptic robotics that replaces traditional UKA instrumentation. This study compares the accuracy of UKA component placement with traditional jig-based instrumentation versus robotic guidance.

85 UKAs performed using standard manual instrumentation were compared to 67 performed with a robotically guided implantation system without instrumentation. Each was performed using a minimally invasive surgical approach. The two groups were identical in terms of age, gender and BMI. The coronal and sagittal alignment of the tibial components were measured on pre-and post-operative AP and lateral radiographs. Postoperative tibial component alignment was compared to the pre-operative plan.

The RMS error of the tibial slope was 3.7° manually compared to 1.2° robotically. In addition, the variance using manual instruments was 9.8 times greater than the robotically guided implantations (p< 0.0001). In the coronal plane, the average error was 3.0 ± 2.2° more varus using manual instruments compared to 0.3 ± 1.9° when implanted robotically (p< 0.0001), while the varus/valgus RMS error was 3.7° manually compared to 1.8° robotically. The average depth of medial tibial plateau resection was significantly less with inlay tibial components (3.9 ± 0.9mm) relative to onlay tibial components (6.8 ± 0.9mm, p< 0.0001). In addition, a significantly higher percentage of robotic inlay patients went home the day of surgery (12% vs. 1%, p< 0.0001).

Tibial component alignment in UKA is significantly more accurate and less variable using robotic guidance compared to manual, jig-based instrumentation. By enhancing component alignment, this novel technique provides a potential method for improving outcomes in UKA patients.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_IV | Pages 429 - 429
1 Nov 2011
Velyvis J Horowitz S Conditt MA
Full Access

Unicompartmental knee arthroplasty is realizing a resurgence due to factors such as improved alignment and sizing of components during surgery. This study compares the early results of two implantation techniques – robotic-assisted and standard manual alignment guides – to evaluate how a new technology developed to improve accuracy affects early patient outcomes.

For this study, we chose a prospective consecutive series of 20 patients in each group to receive a medial unicompartmental knee arthroplasty. The patients were evaluated clinically using standard outcomes measures (Knee Society, WOMAC and Oxford scores) as well as for modes of failure. Average follow-up for the manual onlay technique was 12 months and for the robotic-assisted inlay technique was and 10 months. Patients were not statistically different in terms of BMI, age, or diagnosis (p> 0.05).

Knee society score (p=0.65), total WOMAC score (p=0.75) and Oxford knee score (p=0.88) were not statistically different between the three groups. Five patients in the robotic-assisted inlay group complained of persistent tibial pain that resolved in four patients. There were no revisions for the manual onlay implant group and there was one revision for persistent tibial pain in the robotic-assisted inlay group, consisting of a conversion to a standard manual onlay UKA tibial component.

Patient outcomes were similar with inlay robotic-assisted unicompartmental knee arthroplasty compared with conventional manual onlay implant techniques. Roboticassisted inlay components resulted in slightly increased complaints of tibial pain and had one revision for tibial pain, however the revision was to a standard onlay UKA tibial component.