Advertisement for orthosearch.org.uk
Results 1 - 10 of 10
Results per page:
Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_5 | Pages 23 - 23
1 May 2015
Pecheva M Lacey E Davis B
Full Access

Background:

Pilon fractures are complex intra-articular fractures of the tibial plafond associated with significant short and long morbidity. Minimising surgical complications is essential.

Methods:

Clinical and radiological outcomes in 49 patients with AO type 43B and 43C fractures were evaluated retrospectively. Definitive management depended on patient factors, soft tissue injury and fracture pattern.


The Bone & Joint Journal
Vol. 96-B, Issue 1 | Pages 137 - 142
1 Jan 2014
Nayagam S Davis B Thevendran G Roche AJ

We describe the technique and results of medial submuscular plating of the femur in paediatric patients and discuss its indications and limitations. Specifically, the technique is used as part of a plate-after-lengthening strategy, where the period of external fixation is reduced and the plate introduced by avoiding direct contact with the lateral entry wounds of the external fixator pins. The technique emphasises that vastus medialis is interposed between the plate and the vascular structures.

A total of 16 patients (11 male and five female, mean age 9.6 years (5 to 17)), had medial submuscular plating of the femur. All underwent distraction osteogenesis of the femur with a mean lengthening of 4.99 cm (3.2 to 12) prior to plating. All patients achieved consolidation of the regenerate without deformity. The mean follow-up was 10.5 months (7 to 15) after plating for those with plates still in situ, and 16.3 months (1 to 39) for those who subsequently had their plates removed. None developed a deep infection. In two patients a proximal screw fractured without loss of alignment; one patient sustained a traumatic fracture six months after removal of the plate.

Placing the plate on the medial side is advantageous when the external fixator is present on the lateral side, and is biomechanically optimal in the presence of a femoral defect. We conclude that medial femoral submuscular plating is a useful technique for specific indications and can be performed safely with a prior understanding of the regional anatomy.

Cite this article: Bone Joint J 2014;96-B:137–42.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_11 | Pages 3 - 3
1 Feb 2013
Baker M Davis B Hutchinson R Sanghrajka A
Full Access

Aim

Our aim was to compare the Wilkins'-modified Gartland classification and AO classifications of supracondylar humeral fracture with respect to: -Inter-observer reliability; Association of fracture-grade with radiological quality of reduction; Association of fracture-grade with complications.

Methods

The unit database was interrogated to identify all operated supracondylar fractures between 2007–2011. Radiographs from each case were evaluated by four observers (three consultants, one trainee) and classified according to Gartland and the AO system. Inter-observer reliability was calculated using Cohen's Kappa coefficient. Radiological quality of reduction was evaluated using a new scoring system, combining the anterior humeral line, the lateral capitello-humeral angle (LCHA) and Baumann's angle, (compared to reference values). Analysis of variance (ANOVA) was performed to determine whether there was a statistically significant difference in scores between the fracture grades. Case notes were reviewed for pre- and post-operative complication, and chi-squared test performed to compare the incidence between different fracture grades.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_I | Pages 26 - 26
1 Jan 2011
Davis B Jani B Patel A
Full Access

Printed plain radiographs have traditionally been the method of image transfer between hospitals, but the advent of digital imaging has revolutionised modern day radiology. It is now commonplace for compact discs to be used as the transport media for digital images, the theoretical advantages being ease of transport and storage, integration with PACS systems and the ability to perform image manipulation. However, in our tertiary referral centre for pelvic and acetabular trauma, we noted problems with digital image transfer using this method.

We examined the last 25 compact discs sent to our unit for functionality on 3 separate computers. Only 17/25 discs loaded on all computers, and 2 discs failed to load on any computer. 9 of the remaining 23 discs did not allow image manipulation, and 1 disc would not allow retrieval of all the contained images. 5 of the 23 discs took longer than 5 minutes to retrieve the contained images. In summary, we classed 10 of the 25 discs as acceptable. Patient transfer to our unit was not delayed, but 4 patients underwent repeat CT scans due to incomplete imaging

Digital technology has made great advances into medical imaging. Standardisation using the DICOM format for image creation has attempted to eliminate issues of compatibility, but variation in software used to produce and view images can still vary from these standards. Technical errors in the creation of discs should be eliminated at source, and it is mandatory that referring units check the functionality of discs before they are sent. In this way, the potential for delay to transfer and subsequent repeat exposure to ionising radiation can be avoided.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 402 - 402
1 Jul 2010
Davis B Nayagam S
Full Access

Sub-muscular plating is an established technique in the management of long-bone fractures and reconstruction. In the femur, the presence of the vascular structures medially favours the lateral approach and as such, the technique of medial femoral sub-muscular plating has not, to the authors knowledge, been previously described.

We report a series of 5 patients employing the medial approach to femoral sub-muscular plating. The indications and limitations of the technique are discussed with particular reference to reducing external fixation times, avoidance of stress risers and areas of previously traumatised or infected tissues. The surgical technique for medial femoral sub-muscular plating with emphasis on the role of vastus medialis in the protection of the vascular structures, together with cross sectional anatomy is described.

Medial femoral sub-muscular plating is a useful technique in specific indications and can be performed safely with an understanding of the relevant anatomy.


The Journal of Bone & Joint Surgery British Volume
Vol. 92-B, Issue 7 | Pages 1025 - 1027
1 Jul 2010
Budd H Wimhurst J Davis B Hutchinson R

Subtalar dislocation is a significant injury characterised by late complications, including subtalar arthritis. We describe a rare case of irreducible posterior subtalar dislocation due to incarceration of a fracture of the anterior process of the calcaneum in the subtalar joint, and discuss appropriate management.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 403 - 403
1 Jul 2010
Panchani S Banks J Davis B Nayagam S Giotakis N Narayan B
Full Access

Introduction: The subtrochanteric area of the femur is subject to large tensile and compressive forces. The rate of nonunion following operative fixation of such fractures is about 7–20%. Revision surgery to obtain union is difficult because of the small size of the proximal fragment, muscle forces acting in 2 planes, and bone loss.

We present the results of a series of 9 consecutive patients with subtrochanteric non-unions treated by double plates.

Methods: Retrospective analysis of 9 consecutive subtrochanteric nonunions treated with double plates and additional osteoinduction (bone graft, or BG+BMP-7).

Results: There were 5 male and 4 female patients, with ages from 50–82 years (mean 65). All were treated in a single-stage procedure by implant removal, a lateral plate and a separate anterior plate. One patient had had a previous unsuccessful revision procedure with an intra-medullary device.

One patient with liver cirrhosis died 5 days postoperatively. Two patients are currently 8 weeks post surgery. All the others healed in a mean of 5.1 months (range 4–6 months).

Two patients underwent distal femoral lengthening to compensate for bone loss.

Discussion: The high muscle forces around the proximal femur require a sound mechanical environment for bone healing to occur. This is particularly marked in nonunions. The small size of the proximal fragment can result in suboptimal fixation. The addition of the anterior plate provides better fixation and also neutralizes the sagittal forces.

We believe that double plating neutralizes all the forces around the proximal femur, providing the best mechanical environment. Given the limits of the small numbers and the retrospective nature of the study, we believe that this method of treatment offers a sound surgical strategy, reflected by our success rate.


The Journal of Bone & Joint Surgery British Volume
Vol. 89-B, Issue 1 | Pages 77 - 79
1 Jan 2007
Von Meibom N Gilson N Dhapre A Davis B

We undertook a simultaneous prospective two-centre study to examine why patients with fractures of the proximal femur experience a delay in undergoing surgery.

At centre 1, 23 of 105 patients (22%) suffered an avoidable delay, 18 (78%) because of a lack of theatre capacity while at centre 2, 71 of 130 patients (55%) had an avoidable delay, with 54 (76%) because of this cause. Miscellaneous reasons such as poor ward management, co-existing medical conditions, and lack of equipment were responsible for the remainder of the delays.

Without a substantial increase in operating capacity for acute trauma, it will not be possible to comply with guidelines which recommend surgical treatment within 24 hours in elderly and vulnerable patients.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_III | Pages 409 - 409
1 Oct 2006
Sayana MK Davis B Kapoor B Rahmatalla A Maffulli N
Full Access

Purpose of study: To study the effect of an additional locking screw on fracture strain and stability in tibias undergoing intramedullary nailing.

Methods: An additional locking hole was drilled into four tibial nails, 185 mm from the proximal end of the 8 mm x 315 mm solid tibial nails. The nails were locked proximally and distally into a triple strain-gauged sawbone. An osteotomy was created distal to the additional hole, and the construct loaded axially, in flexion and extension, and in torsion with and without the extra locking screw. With the additional locking screw in place, strain increased at the proximal strain gauge site during loading in neutral by 17% (139 mϵ, 91–198) (p=0.01) and flexion by 8% (65 mϵ, 60–73) (p< 0.005). Strain decreased on loading in extension by 10% (141 mϵ, 62–243) (p=0.0497). The extra locking screw decreased strain at the gauge closest to the osteotomy site in all loading positions. Strain showed an overall increase with axial loading of 14% (47 mϵ, 4–105) (p=0.16), an increase with loading in flexion of 2% (9 mϵ, −38 to 62) (p=0.75) but a decrease of 47% (254 mϵ, 6–549) (p=0.18) with loading in extension. A significant reduction in angular motion at the osteotomy site occurred with the addition of the extra locking screw (21° at 34.5 Nm without the screw, 13° at 34.5 Nm with the screw, p=0.001). Additional hole in the shaft of the nail lead to increase the stress from 29 – 48 mPa (29 – 48 N/mm2) but did not fail when vertically loaded with 450 Newtons applied at rate of 5Hz sinusoidal waves for 2 million cycles.

Conclusion: Nails with additional locking options, by altering strain and motion at the fracture site, may have the clinical potential to affect fracture healing with relatively low risk of implant failure.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_II | Pages 113 - 113
1 Feb 2004
Davis B Gadgil A Trivedi J Dove J Ahmed E
Full Access

Objective The hypothesis of this study is that the flexibility of idiopathic scoliosis curves as measured by traction radiography performed under general anaesthetic (TUA) will be superior to supine bending radiography. Subsequently, this may aid in determining the surgical approach, sparing patients anterior release surgery, and show greater correlation with the postoperative result. This is a new technique, not previously reported in the literature.

Design A prospective comparison between TUA and supine bending radiography to determine curve flexibility, and examine their relationship with anterior release surgery and postoperative correction.

Subjects This study was based on 21 patients with a diagnosis of idiopathic scoliosis, admitted for corrective surgery at our unit.

Outcome measures The amount of correction achieved by each of the two methods on the preoperative curve was examined using a paired t-test. The influence of the TUA on the decision for anterior release surgery was noted, along with the correlation of each method with postoperative correction.

Results On statistical analysis with a paired t-test, TUA showed significantly greater curve flexibility than that shown by supine bending radiographs (p< 0.001) irrespective of curve classification or magnitude. Of the 11 patients planned for anterior release surgery with posterior fusion, the use of TUA obviated this in 9 (82%) by demonstrating greater preoperative curve flexibility. Excluding thoracolumbar curves, TUA showed significantly greater postoperative correlation than supine bending radiography (R=0.79, R=0.61 respectively).

Conclusion In our unit, traction radiography performed under general anaesthetic is superior to supine bending radiography in assessing curve mobility prior to surgery. Performing TUA has significant benefits to patients in avoiding unnecessary anterior release surgery, and has greater correlation with postoperative correction. In studying fulcrum bending radiographs, Cheung1 showed similar benefits in avoiding anterior release and we therefore recommend the use of these methods by other institutions.