This session will present a series of challenging and complex primary and revision cases to a panel of internationally respected hip arthroplasty experts. The primary cases will include challenges such as hip dysplasia, altered bony anatomy and fixation challenges. In the revision hip arthroplasty scenarios issues such as bone stock loss, leg length discrepancy, instability and infection will be discussed. This will be an interactive case-based session that at its conclusion should leave the attendee with a more thorough approach to these challenging issues.

While no one would argue the necessary role for the medical management of patients with early knee arthritis, significant controversy remains regarding the ideal treatment for a patient with bone-on-bone osteoarthritis who could equally be treated with a high tibial osteotomy, a uni-compartmental total knee, potentially a patello-femoral replacement if dealing with isolated patello-femoral disease or lastly, a complete total knee replacement. While clearly to date there has not been consensus on this issue, a review of the arguments, both pro and con, should be used as a guide to the surgeon in making this clinical judgment.

1. Patient Satisfaction.- Many ardent supporters of uni-compartmental knee replacements espouse one of the principle benefits of the uni knee as much greater patient satisfaction. Unfortunately, what is never taken into account is the pre-selection bias that occurs in this patient population. Patients with the most minimal amount of arthritis and those with the greatest range of motion are pre-selected to undergo a uni-compartmental knee replacement compared to the more advanced arthritic knee with mal-alignment and more significant pre-operative disability that will undergo a total knee replacement. Additionally the sources of data to draw the conclusions must be carefully analyzed. We must avoid using data from small series with unblinded patients performed by surgeons expert in the technique. Instead registry data, with its broad based applicability, is a much more logical source of information. Of significance, when over 27,000 patients were assessed regarding satisfaction following knee surgery; there was no difference in proportions of satisfied patients whether they had a total knee or a uni-compartmental knee.

2. Implant Longevity - Once again large prospective cohort data in the form of arthroplasty registries strongly favors total knee arthroplasty over uni-compartmental knee arthroplasty. The Swedish Knee Arthroplasty Registry demonstrated higher revision rates with uni's as compared with total knee replacements. In the Australian Joint Replacement Registry the cumulative 13-year percent revision rate for primary total knee replacements is 6.8% and for uni-compartmental knee replacements is 15.5%. Higher failure rates in uni-compartmental knee replacements seen in Australia has correlated to a significant decrease in the number of uni's being performed, which peaked at 15.1% in 2003 and in 2014 has reduced to 4.7%. There is a direct correlation to age, with younger patients having a significantly higher percentage of revision following uni-compartmental knee replacements (25% failure rate at 11 years if less than 55 years old). There is also tremendous variability in the success rate of the uni in the Australian Registry depending on the implant design (5 year cumulative revision rate range 5.0% to 18.9%), which is simply not seen in the total knee replacement population (5 year cumulative revision rate range 1.6% to 7.7%).

While one can perform the philosophical exercise of debating the merits of a total knee versus uni-compartmental knee, the evidence is overwhelming that in the hands of the masses a total knee replacement patient will have equal satisfaction to a uni-compartmental patient, and will enjoy a much lower probability of revision in the short term and in the long term.

Background

The advent of highly cross-linked polyethylene has resulted in improved wear rates and reduced osteolysis with at least intermediate follow-up when compared to conventional polyethylene. However, the role of alternative femoral head bearing materials in decreasing wear is less clear. The purpose of this study was to determine in-vivo polyethylene wear rates across ceramic, Oxinium, and cobalt chrome femoral head articulations.

Background

Fretting corrosion at the junction of the modular head neck interface in total hip arthroplasty is an area of substantial clinical interest. This fretting corrosion has been associated with adverse patient outcomes, including soft tissue damage around the hip joint. A number of implant characteristics have been identified as risk factors. However, much of the literature has been based on metal on metal total hip arthroplasty or subjective scoring of retrieved implants. The purpose of this study was to isolate specific implant variables and assess for material loss in retrieved implants with a metal on polyethylene bearing surface.

This session will present a series of challenging and complex primary and revision cases to a panel of internationally respected hip arthroplasty experts. The primary cases will include challenges such as hip dysplasia, altered bony anatomy and fixation challenges. In the revision hip arthroplasty scenarios issues such as bone stock loss, leg length discrepancy, instability and infection will be discussed. This will be an interactive case-based session that at its conclusion should leave the attendee with a more thorough approach to these challenging issues.

The concept of constitutional varus and controversy regarding placing the total knee arthroplasty (TKA) in a neutral versus physiologic alignment in varus osteoarthritic (OA) patients is an important current discussion. However, the physiologic mechanical alignment of a varus OA knee is unknown and the relative contribution of the femur and tibia to the mechanical axis is unknown. The goal of this study was to determine and analyse the physiologic mechanical axis of medial OA knees.

Plain radiographs of the knee and full-leg standing radiographs of 1558 patients were reviewed for inclusion criteria; 313 patients with a non-arthritic knee and a contralateral varus end-stage OA knee were analysed in the coronal plane. The Hip-Knee-Ankle (HKA), Condylar-Hip (CH)(femoral), Condylar-Plateau (CP) (intra-articular) and Plateau-Ankle (PA)(tibial) angles were measured for both the arthritic and non-arthritic/physiologic knee. The relationship and contribution of all angles was analysed for every 2° degrees of progressive varus: from 4° valgus to 8° varus. The proportion of patients with constitutional varus was also determined for the sample population and correlated with increasing HKA.

The mean CH (femoral) angle was valgus in all groups and decreased with progressive varus alignment (p< 0.0001), ranging from 3.8° ± 1.0° with HKA of 2–4° valgus, to 0.1° ± 1.5° with HKA of 6–8° varus. The mean PA (tibial) angle was varus in all groups and decreased from valgus to progressively varus alignment (p p<0.0001), ranging from 0.78° ± 1.4° with HKA 2–4° valgus, to 5.6° ± 1.9° with HKA 6–8° varus. The CP angle showed no difference between all groups (p=0.3). Forty five percent of males and 22% of females with arthritic HKA in varus alignment were found to have constitutional varus.

Correlation of unilateral arthritic knees to the unaffected, physiologic aligned knee using full-leg radiographs indicates that it may be possible to understand the patient's physiologic, pre-arthritic coronal plane alignment. The mechanical axis of physiologic knees in a unilateral varus OA population demonstrates a variable contribution of the femur (CH) and tibia (PA) from overall valgus to varus alignment. In addition, a significant proportion of the sample population possessed constitutional varus. This may provide important information regarding the placement of physiologic TKA's and direct future research questions.

Adequate fixation of implant components is an important goal for all arthroplasty procedures. Aseptic loosening is one of the leading causes of revision surgery in total knee arthroplasty. Radiostereometric analysis (RSA) is an imaging technique to measure implant migration, with established migration thresholds for well-fixed, at risk, and unacceptably migrating components. The purpose of the present study was to examine the long-term fixation of a cemented titanium fixed bearing polished tibial baseplate.

Patients enrolled in a previous two-year prospective trial were recalled at ten years. All patients received a cemented, posterior-stabilised total knee replacement of the same design implanted by one of three surgeons. Of the original 35 patients, 16 were available for long-term follow-up, with one patient lost to follow-up, nine patients deceased, and a further nine patients unwilling to return to the clinic. Each patient underwent RSA imaging in a supine position using a conventional RSA protocol. Migration of the tibial component in all planes as well as maximum total point motion (MTPM) was compared between all time points (baseline, six weeks, three months, six months, one year, two years) up to the ten year follow-up visits. Outcome scores including the Knee Society Score (KSS), WOMAC, SF-12, and UCLA Activity Score were recorded.

At ten years, the mean migrations of the tibial component were less than 0.1 mm and 0.1 degree in all planes relative to the post-operative RSA exam. There was no significant difference in tibial component migration between time points. However, MTPM increased significantly over time (p = 0.002), from 0.23 ± 0.18 mm at six weeks to 0.42 ± 0.20 mm at ten years. At one year, 13 patients had an acceptable MTPM level, three patients had an ‘at risk’ level, and no patient had an ‘unacceptable’ level. No patients were revised at ten years. WOMAC and KSS were significantly improved (p < 0.0001) at the latest follow-up compared to pre-operatively, but there was no difference in SF-12. The median UCLA Activity Score at latest follow-up was six (range, two to eight).

The tibial baseplate demonstrated solid fixation at ten years. No patients had an unacceptable MTPM level at one year and no patients were revised at ten years, supporting the use of RSA to predict long-term loosening risk. The low level of tibial baseplate migration found in the present study correlates to the low rate of revision for this implant as reported in individual studies and in joint replacement registries.

Infection following total hip arthroplasty (THA) represents a devastating complication and is one of the main causes for revision surgery. This complication may be treated by irrigation and debridement with head and polyethylene exchange (IDHPE) or a two-stage revision (2SR). Previous studies have reported on the eradication success rates but few have reported patient outcome scores. The purpose of this study was to report patient outcome scores for both IDHPE and 2SR and compare these to a non-infected matched cohort. We hypothesised that both cohorts would have worse outcomes than the control group, and that those who failed an initial IDHPE and required a 2SR would have a worse outcome than those treated initially with a 2SR.

A retrospective review identified 137 patients from our institutional arthroplasty database who had an infected primary THA between 1986–2013. We excluded patients with less than one-year follow-up. Mean follow-up was 60 months (12–187 months). A control cohort was identified and matched according to age and Charlton Comorbidity Index (CCI). Harris Hip Scores, Short Form 12 and WOMAC scores were compared between our control group and our infected cohort.

Sixty-eight patients were treated with a 2SR and 69 patients were treated with an IDHPE. There was a 59% success rate in eradicating the infection with an IDHPE. All of the 28 patients who failed an IDHPE later went on to a 2SR. Outcome scores for the 2SR cohort were significantly worse than the non-infected controls (p0.05). There was no difference in outcome scores when comparing our 2SR cohort to our failed IDHPE (p>0.05).

Previous studies have focused on eradication rates. However, it is important to consider patient outcome scores when deciding the best treatment. Infected patients treated with a successful IDHPE had similar outcomes to non-infected patients. Patients that failed IDHPE and went onto 2SR had similar outcomes to those that had a 2SR alone. IDHPE should still be considered in the treatment algorithm of infected THA.

While no one would argue the necessary role for the medical management of patients with early knee arthritis, significant controversy remains regarding the ideal treatment for a patient with bone-on-bone osteoarthritis who could equally be treated with a high tibial osteotomy, a uni-compartmental total knee, potentially a patello-femoral replacement if dealing with isolated patello-femoral disease or lastly, a complete total knee replacement. While clearly to date there has not been consensus on this issue, a review of the arguments, both pro and con, should be used as a guide to the surgeon in making this clinical judgment.

Patient Satisfaction: Many ardent supporters of uni-compartmental knee replacements espouse one of the principle benefits of the uni knee as much greater patient satisfaction. Unfortunately, what is never taken into account is the pre-selection bias that occurs in this patient population. Patients with the most minimal amount of arthritis and those with the greatest range of motion are pre-selected to undergo a uni-compartmental knee replacement compared to the more advanced arthritic knee with mal-alignment and more significant preoperative disability that will undergo a total knee replacement. Additionally the sources of data to draw the conclusions must be carefully analyzed. We must avoid using data from small series with unblinded patients performed by surgeons expert in the technique. Instead registry data, with its broad based applicability, is a much more logical source of information. Of significance, when over 27,000 patients were assessed regarding satisfaction following knee surgery; there was no difference in proportions of satisfied patients whether they had a total knee or a uni-compartmental knee.

Implant Longevity: Once again large prospective cohort data in the form of arthroplasty registries strongly favors total knee arthroplasty over uni-compartmental knee arthroplasty. The Swedish Knee Arthroplasty Registry demonstrated higher revision rates with uni's as compared with total knee replacements. In the Australian Joint Replacement Registry the cumulative 13 year percent revision rate for primary total knee replacements is 6.8% and for uni-compartmental knee replacements is 15.5%. Higher failure rates in uni-compartmental knee replacements seen in Australia has correlated to a significant decrease in the number of uni's being performed, which peaked at 15.1% in 2003 and in 2014 has reduced to 4.7%. There is a direct correlation to age, with younger patients having a significantly higher percentage of revision following uni-compartmental knee replacements (25% failure rate at 11 years if less than 55 years old). There is also tremendous variability in the success rate of the uni in the Australian Registry depending on the implant design (5 year cumulative revision rate range 5.0% to 18.9%), which is simply not seen in the total knee replacement population (5 year cumulative revision rate range 1.6% to 7.7%).

While one can perform the philosophical exercise of debating the merits of a total knee versus uni-compartmental knee, the evidence is overwhelming that in the hands of the masses a total knee replacement patient will have equal satisfaction to a uni-compartmental patient, and will enjoy a much lower probability of revision in the short term and in the long term.

Previous retrieval studies demonstrate increased tibial baseplate roughness leads to higher polyethylene backside wear in total knee arthroplasty (TKA). Micromotion between the polyethylene backside and tibial baseplate is affected by the locking mechanism design and can further increase backside wear. The purpose of this study was to examine modern locking mechanisms, in the setting of both roughened and polished tibial baseplates, on backside tibial polyethylene wear.

Five TKA models were selected, all with different tibial baseplate and/or locking mechanism designs. Six retrieval tibial polyethylenes from each TKA model were matched based on time in vivo (TIV), age at TKA revision, BMI, gender, number of times revised, and revision reason. Two observers scored each polyethylene backside according to a visual damage score and individual damage modes. Primary outcomes were mean damage score and individual damage modes. Demographics were compared by one-way ANOVA. Damage scores and modes were analysed by the Kruskal-Wallis test and Dunn's multiple comparisons test.

There were no differences among the groups based on TIV (p=0.962), age (p=0.651), BMI (p=0.951), gender, revision number, or reason for revision. There was a significant difference across groups for mean total damage score (p=0.029). The polished tibial design with a partial peripheral capture locking mechanism and anterior constraint demonstrated a significantly lower score compared to one of the roughened tibial designs with a complete peripheral-rim locking mechanism (13.0 vs. 22.1, p=0.018). Otherwise, mean total damage scores were not significant between groups. As far as modes of wear, there were identifiable differences among the groups based on abrasions (p=0.005). The polished design with a tongue-in-groove locking mechanism demonstrated a significantly higher score compared to both groups with roughened tibial baseplates (5.83 vs. 0.83, p=0.024 and 5.83 vs. 0.92, p=0.033). Only the two designs with roughened tibial baseplates demonstrated dimpling (5.67 and 8.67) which was significant when compared against all other groups (p0.99). No other significant differences were identified when examining burnishing, cold flow, scratching, or pitting. No polyethylene components exhibited embedded debris or delamination.

Total damage scores were similar between all groups except when comparing one of the polished TKA design to one of the roughened designs. The other TKA model with a roughened tibial baseplate had similar damage scores to the polished designs, likely due to its updated locking mechanism. Dimpling wear patterns were specific for roughened tibial baseplates while abrasive wear patterns were identified in the design with a tongue-in-groove locking mechanism. Our study showed even in the setting of a roughened tibial baseplate, modern locking mechanisms decrease backside wear similar to that of other current generation TKA designs.

The incidence of major complications following total joint arthroplasty is low, however, surgeons often continue to see patients regularly to monitor outcomes and the performance of the implant. The purpose of this study was to assess the feasibility, effectiveness and cost-effectiveness of a web-based follow-up compared to in-person assessment following primary total hip or total knee arthroplasty. We also determined patient satisfaction and preference for follow-up method.

Patients who were at least 12 months postoperative were randomised to complete either a web-based follow-up or to have their appointment at the clinic, as usual. We excluded patients who had revision surgery, osteolysis, or identified radiographic issues. We report the frequency of web-based patients who had an issue missed by using the web-based follow-up. We recorded travel costs and time associated with each follow-up, and any health care resource use for one year following the assessment. We conducted a cost analysis from the health-care payer (Ontario Ministry of Health and Long-Term Care) and societal perspectives. All costs are presented in 2012 Canadian dollars. We used descriptive statistics to summarise the satisfaction and preference results and compared satisfaction between groups using Pearson's chi-square test.

Two hundred-twenty nine patients completed the study (111 usual-care, 118 web-based), with a mean age of 69 years (range, 38–86 years). There were no patients who had an issue missed by the web-based follow-up. The cost for the web-based assessment was significantly lower from both the societal perspective (mean difference, $−64; 95% confidence interval, $−79 to $−48; p < 0.01) and the health-care payer perspective (mean difference, $−27; 95% CI, $−29 to $−25; p < 0.01). Ninety-one patients (82.0%) in the usual-care group indicated that they were either extremely or very satisfied with the follow-up process compared with 90 patients (75.6%) in the web-based group (p < 0.01; odds ratio = 3.95; 95% CI = 1.79 to 8.76). Similarly, 92.8% of patients in the usual care group were satisfied with the care they received from their surgeon, compared to 73.9% of patients in the web-based group (p < 0.01, OR = 1.37; 95% CI = 0.73 to 2.57). Forty-four percent of patients preferred the web-based method, 36% preferred the usual method, and 16% had no preference (p = 0.01).

Web-based follow-up is a feasible, clinically effective alternative to in-person clinic assessment, with moderate to high patient satisfaction. A web-based follow-up assessment has lower mean costs per person compared to the usual method of in-person follow-up from both a societal and health-care payer perspective. The web-based assessment may introduce additional efficiency by redirecting limited outpatient resources to those awaiting first consultation, patients who have complications, or those who are further postoperative and may require a revision.

A conceptually new, to the North American market, acetabular design is currently available when performing a total hip arthroplasty – the dual mobility socket. Essentially this is a press-fit acetabular component with a polished surface (either modular or monoblock) that articulates with a large polyethylene head with a 28 mm ball inserted into that polyethylene in a similar fashion to a bipolar design.

Proponents of this design advocate its use to reduce the risk of dislocation, and it is being offered as an alternative to constrained liners and also as a potential prophylactic application in revision and high risk patients.

The concerns regarding this construct include:

Wear - A large polyethylene head articulating against a polished metal surface may have much greater wear than a conventional metal against polyethylene bearing. Hip simulator data has shown this previously. Additionally there are two articulating surfaces, potentially leading to a greater combined wear than one would see with just a singular surface.

There are many options available to both manage and to prevent hip instability. Any new implant must show equivalence to current devices on the many fronts of wear, fixation, mid-term results, complications and costs.

The incidence of major complications following total joint arthroplasty is low, however, surgeons often continue to see patients regularly to monitor outcomes and the performance of the implant. The purpose of this study was to assess the feasibility, effectiveness and cost-effectiveness of a web-based follow-up compared to in-person assessment following primary total hip or total knee arthroplasty. We also determined patient satisfaction and preference for follow-up method.

Patients who were at least 12 months post-operative were randomised to complete either a web-based follow-up or to have their appointment at the clinic, as usual. We excluded patients who had revision surgery, osteolysis, or identified radiographic issues. We report the frequency of web-based patients who had an issue missed by using the web-based follow-up. We recorded travel costs and time associated with each follow-up, and any health care resource use for one year following the assessment. We conducted a cost analysis from the health-care payer (Ontario Ministry of Health and Long-Term Care) and societal perspectives. All costs are presented in 2012 Canadian dollars. We used descriptive statistics to summarise the satisfaction and preference results and compared satisfaction between groups using Pearson's chi-square test.

Two hundred-twenty nine patients completed the study (111 usual-care, 118 web-based), with a mean age of 69 years (range, 38–86 years). There were no patients who had an issue missed by the web-based follow-up. The cost for the web-based assessment was significantly lower from both the societal perspective (mean difference, $-64; 95% confidence interval, $-79 to $−48; p < 0.01) and the health-care payer perspective (mean difference, $−27; 95% CI, $−29 to $−25; p < 0.01). Ninety-one patients (82.0%) in the usual-care group indicated that they were either extremely or very satisfied with the follow-up process compared with 90 patients (75.6%) in the web-based group (p < 0.01; odds ratio = 3.95; 95% CI = 1.79 to 8.76). Similarly, 92.8% of patients in the usual-care group were satisfied with the care they received from their surgeon, compared to 73.9% of patients in the web-based group (p < 0.01, OR = 1.37; 95% CI = 0.73 to 2.57). Forty-four percent of patients preferred the web-based method, 36% preferred the usual method, and 16% had no preference (p = 0.01).

Web-based follow-up is a feasible, clinically effective alternative to in-person clinic assessment, with moderate to high patient satisfaction. A web-based follow-up assessment has lower mean costs per person compared to the usual method of in-person follow-up from both a societal and health-care payer perspective. The web-based assessment may introduce additional efficiency by redirecting limited outpatient resources to those awaiting first consultation, patients who have complications, or those who are further post-operative and may require a revision.

Studies that have previously examined the relationship between inclination angle and polyethylene wear have shown increased wear of conventional polyethylene with high inclination angles. To date, there have been no long term in vivo studies examining the correlation between cup position and polyethylene wear with highly crosslinked polyethylene.

An institutional arthroplasty database was used to identify patients who had metal-on-highly crosslinked polyethylene primary total hip arthroplasty (THA) using the same component design with a minimum follow up of 10 years ago. A modified RSA examination setup was utilised, recreating standard anteroposterior (AP) and cross-table lateral exams in a single biplane RSA acquisition. Three dimensional head penetration was measured using the centre index method. The same radiographs were used to measure inclination angle and anteversion. Spearman correlation was used to show an association between the parameters of acetabular position and wear rate.

A total of 43 hips were included for analysis in this study. Average follow-up was 12.3 ± 1.2 years. The average linear wear rate was calculated to be 0.066 ± 0.066 mm/year. Inclination angle was not correlated with polyethylene wear rate (p=0.82). Anteversion was also not correlated with polyethylene wear rate (p=0.11). There was no statistical difference between wear rates of hips within Lewinnek's “safe zone” and those outside this “safe zone” (p=0.11). Males had a higher wear rate of 0.094 ± 0.089 mm/year compared to females with a wear rate of 0.046 ± 0.032 mm/year (p=0.045).

At long term follow up of greater than 10 years, highly cross linked polyethylene has very low wear rates. This excellent tribology is independent of acetabular position, but gender did impact wear rates. Due to the low wear rates, follow-up of even longer term is suggested to examine variables affecting wear.

Complications involving the patellofemoral joint are a source of anterior knee pain, instability, and dysfunction following total knee arthroplasty. “Overstuffing” the patello-femoral joint refers to an increase in the thickness of the patellofemoral joint after a total knee replacement compared to the preoperative thickness. While biomechanical studies have indicated that overstuffing the patellofemoral joint may lead to adverse clinical outcomes, limited clinical evidence exists to support this notion. The purpose of this study is to evaluate the effect of changing the thickness of the patellafemoral joint on functional outcomes following total knee arthroplasty.

Our institutional arthroplasty database was used to identify 1347 patients who underwent a primary total knee arthroplasty between 2006 and 2012 with the same component design. Standard preoperative and postoperative anteroposterior, lateral, and skyline radiographs were collected and measured for patello-femoral overstuffing. These measurements included anterior patellar displacement, anterior femoral offset, and anteroposterior femoral size. These measurements were correlated with patient outcome data using WOMAC, KSS scores, and postoperative range of motion. Multiple linear regression analysis was used to assess the association between stuffing and functional outcomes.

A total of 1031 patients who underwent total knee arthroplasty were included. Increased anterior patellar displacement, a measure of patellofemoral joint thickness, was associated with decreased WOMAC scores (p=0.02). Anterior femoral offset (p=0.210) and anteroposterior femoral size (p=0.091) were not significantly associated with patient functional outcomes. Postoperative range of motion (ROM) was not associated with patellofemoral stuffing (p=0.190).

The current study demonstrated that functional outcomes are adversely affected by patellofemoral overstuffing. Based on these results, caution is encouraged against increasing the thickness of the patellofemoral joint, particularly on the patellar side of the joint.

While the vast majority of total knee replacements performed throughout the world employ a modular metal-backed tibial tray, and not an all-polyethylene tray, this issue remains controversial.

Proposed advantages to a metal-backed tray include: a) decreased bending strains, b) reduces compressive stresses in the cement and cancellous bone beneath the baseplate (especially in asymmetric loading), c) distributes load more evenly across the interface

Proposed advantages of an all-polyethylene tray include: a) cost reduction, b) reduced polyethylene thickness with the same amount of bone resection, c) increased tensile stresses at the interface during eccentric loading

The challenge is at present we don't know the >10-year track record of current generation tibial components. This debate centers on the <60-year-old. This is the most difficult patient in total knee arthroplasty with higher revision rates than an older cohort.

It makes sense to use an all-polyethylene tibia if the revision rates turn out to be similar and you don't intend to do a polyethylene exchange in the future. It makes sense to do a modular tray if the results are similar, but there is an intention to do a polyethylene exchange in the future. If either one of these implants choices has a lower cumulative revision rate, then that is the implant of choice at present.

However, we need to understand that at present we don't know if the results of current generation all-polyethylene tibial components will indeed be equal to metal-backed components. The most recent data from the Australian registry suggests that in fact all-polyethylene tibial components have a higher failure rate than metal-backed components when looking at the entire class of design. This would be expected to be even more significant in the younger patient.

The philosophy of cemented total hip arthroplasty (THA) femoral components has become polarised. At one extreme are polished, collarless, tapered devices that are expected to subside; at the other extreme are roughened, non-tapered implants with a collar designed not to subside. Radiostereometric analysis (RSA) allows the accurate measurement of implant movement and has been extensively used for measurement of the in vivo migration of implants. The degree of migration as measured by RSA during the first years after surgery has been shown to correlate with the long-term performance of cemented femoral implants. The purpose of this study was to review the two-year RSA results of two different designs of primary cemented THA stems.

Data from two previous prospective RSA trials with two-year follow-up were pooled. The first group included 36 patients who received a Spectron (Smith & Nephew, Memphis, USA) cemented stem. The second group included 13 patients who received an Exeter (Stryker, Mahwah, USA) cemented stem, and 15 patients who received a CPCS (Smith & Nephew, Memphis, USA) cemented stem. All patients underwent RSA examinations shortly post-operation, at 6 weeks, 3 months, 6 months, 1 years, and 2 years. Migration and rotation of the femoral stems was measured at each time point relative to the post-operative exam, and compared between the two groups.

There was no difference in age at surgery (Spectron 78 ± 6 years, Exeter/CPCS 77 ± 5 years, p = 0.43), BMI (Spectron and Exeter/CPCS 28 ± 5 kg/m2, p = 0.92), or percentage of male patients (Spectron 23% male, Exeter/CPCS 21% male) between the implant groups. Subsidence was significantly greater (p < 0.0001) at all time points from three months to two years for the Exeter and CPCS stems (0.94 ± 0.39 mm at two years) compared to the Spectron stem (0.05 ± 0.16 mm at two years). There was no significant difference between the stem types for medial-lateral translation (p = 0.07) or anterior-posterior translation (p = 0.49), or for anterior-posterior tilt (p = 0.15), internal-external rotation (p = 0.89), or varus-valgus rotation (p = 0.05).

Implant material, design, and surface finish are all factors in the long-term performance of cemented femoral hip implants. In this study, both femoral stem designs had a magnitude of sub-sidence that was within the limits of what is considered to be safe with respect to long-term performance. The continuous subsidence of the Exeter and CPCS stems is consistent with previous reports in the literature.

Pain immediately following total knee arthroplasty (TKA) is often severe and can inhibit patients' rehabilitation. Recently, adductor canal blocks have been shown to provide adequate analgesia and spare quadriceps muscle strength in the early postoperative period. We devised a single injection motor sparing knee block (MSB) by targeting the adductor canal and lateral femoral cutaneous nerve with a posterior knee infiltration under ultrasound. Our primary objective was to evaluate the analgesia duration of the MSB in comparison to a standard periarticular infiltration (PAI) analgesia using patients' first rescue analgesia as the end point. Secondary outcomes measured were quadriceps muscle strength and length of stay.

We randomised 82 patients scheduled for elective TKA to receive either the preoperative MSB (0.5% ropivacaine, 2.5ug/ml epinephrine, 10mg morphine, and 30mg ketorolac) or intraoperative periarticular infiltration (0.3% ropivacaine, 2.5ug/ml epinephrine, 10mg morphine, and 30mg ketorolac). Duration of analgesia, postoperative quadriceps power, and length of stay were evaluated postoperatively.

Analgesic duration was found to be significantly different between groups. The MSB had a mean duration of 18.06 ± 1.68 hours while the PAI group had a mean duration of 9.25 ± 1.68 hours for a mean difference of 8.8 hours (95% CI 3.98 to 13.62), p<0.01. There were no significant differences between groups in quadriceps muscle strength power at 20 minutes (p=0.91) or 6 hours (p=0.66) after block administration. Length of stay was also not significantly different between the groups (p=0.29).

Motor sparing blocks provide longer analgesia than patients receiving periarticular infiltration while not significantly reducing quadriceps muscle strength or increasing length of hospital stay.

Trunnionosis in modular hip arthroplasty has recently been recognised to be clinically important. Gaining an understanding of how the material interface at the head-trunnion affects the tribology at the modular junctions has current clinical implications as well as an implication on future implant selection and material choice. This matched-cohort study aims to compare tribocorrosion between ceramic and cobalt-chromium trunnions and to investigate other factors that contribute to the difference in tribocorrosion if present.

All hip prostheses retrieved between 1999 and 2015 at one centre were reviewed. Fifty two ceramic heads were retrieved, and these were matched to a cobalt-chromium cohort according to taper design, head size, neck length and implantation time in that order. The two cohorts were similar in male:female ratio (p=0.32) and body mass index (p=0.15) though the ceramic group was younger than the cobalt-chromium group (56.6 (+/−)13.5 years for ceramic group vs 66.3 (+/−14.4) years for cobalt-chromium group; p=0.001). There was no significant difference in the reasons for revision between the two groups (p=0.42). The femoral head trunnions were examined by two independent observers using a previously published 4-point scoring technique. The trunnions were divided into three zones: apex, middle and base. The observers were blinded to clinical and manufacturing data where possible.

Ceramic head trunnions demonstrated a lower median fretting and corrosion score at the base zone (p<0.001), middle zone (p<0.001) and in the combined score (p<0.001). In a subgroup analysis by head size, ceramic heads had a lower fretting and corrosion score at 28mm head diameter (p<0.001). Within the ceramic group, taper design had a significant effect on fretting and corrosion in the apex zone (p=0.04). Taper design also had a similar effect in the cobalt-chromium group in the apex zone (p=0.03). For the ceramic trunnions, the largest effect was contributed by the difference between the 11/13 taper and the 12/14 taper. For the cobalt-chromium trunnions, the largest effect was contributed by the difference between the 5 degree 38′ 37″ taper and type 1 taper.

Ceramic head trunnions showed a significantly lower fretting and corrosion score as compared to cobalt-chromium trunnions. Ceramic heads had a lower score than cobalt-chromium heads at 28mm head diameter. Taper design had an effect on fretting and corrosion within each cohort.

The advent of highly cross-linked polyethylene has resulted in improved wear rates and reduced osteolysis with at least intermediate follow-up when compared to conventional polyethylene. However, the role of alternative femoral head bearing materials in decreasing wear is less clear. The purpose of this study was to determine in-vivo polyethylene wear rates across ceramic, Oxinium, and cobalt chrome femoral head articulations.

A review of our institutional database was performed to identify patients who underwent a total hip arthroplasty using either ceramic or oxidised zirconium (Oxinium) femoral head components on highly cross-linked polyethylene between 2008 and 2011. These patients were then matched on implant type, age, sex and BMI with patients who had a cobalt chrome bearing implant during the same time period. RSA analysis was performed using the centre index method to measure femoral head penetration (polyethylene wear). Secondary quality of life outcomes were collected using WOMAC and HHS Scores. Paired analyses were performed to detect differences in wear rate (mm/year) between the cobalt chrome cohorts and their matched ceramic and Oxinium cohorts. Additional independent group comparisons were performed by analysis of variance with the control groups collapsed to determine wear rate differences between all three cohorts.

A total of 68 patients underwent RSA analysis. Fifteen patients with a ceramic femoral head component and 14 patients with an Oxinium femoral head component along with the same number of matched patients with cobalt chrome femoral head component were included in the analysis. The time in vivo for the Oxinium (5.17 +/− 0.96 years), Oxinium matched cohort (5.13 +/− 0.72 years), ceramic (5.15 +/− 0.76 years) and ceramic matched cohort (5.36 +/− 0.63 years) were comparable. The demographics of all bearing surface cohorts were similar. The paired comparison between the Oxinium and cobalt chrome cohorts (0.33 vs. 0.29 mm/year, p=0.284) and ceramic vs cobalt chrome cohorts (0.26 vs. 0.20 mm/year, p=0.137) did not demonstrate a significant difference in wear rate. The independent groups analysis revealed a significantly higher wear rate of Oxinium (0.33 mm/year) compared to cobalt chrome (0.24 mm/year) (p = 0. 038). There were no differences in HHS and WOMAC scores between the Oxinium and cobalt chrome cohorts (HHS: p = 0.71, WOMAC: p=0.08) or the ceramic and cobalt chrome cohorts (HHS: p=0.15, WOMAC: p=023).

This study presents evidence of a greater wear rate (mm/year) of the Oxinium femoral head component compared to a cobalt chrome femoral head component. This difference was not demonstrated in the ceramic femoral head component. Despite this difference, there were no clinical differences as measured by the HHS and WOMAC. Future research should focus on factors that may contribute to the higher wear rate seen in the Oxinium cohort.