Aims

Refobacin Bone Cement R and Palacos R + G bone cement were introduced to replace the original cement Refobacin Palacos R in 2005. Both cements were assumed to behave in a biomechanically similar fashion to the original cement. The primary aim of this study was to compare the migration of a polished triple-tapered femoral stem fixed with either Refobacin Bone Cement R or Palacos R + G bone cement. Repeated radiostereometric analysis was used to measure migration of the femoral head centre. The secondary aims were evaluation of cement mantle, stem positioning, and patient-reported outcome measures.

Polished taper-slip (PTS) cemented stems have an excellent clinical track record and are the most common stem type used in primary total hip arthroplasty (THA) in the UK. Due to low rates of aseptic loosening, they have largely replaced more traditional composite beam (CB) cemented stems. However, there is now emerging evidence from multiple joint registries that PTS stems are associated with higher rates of postoperative periprosthetic femoral fracture (PFF) compared to their CB stem counterparts. The risk of both intraoperative and postoperative PFF remains greater with uncemented stems compared to either of these cemented stem subtypes. PFF continues to be a devastating complication following primary THA and is associated with high complication and mortality rates. Recent efforts have focused on identifying implant-related risk factors for PFF in order to guide preventative strategies, and therefore the purpose of this article is to present the current evidence on the effect of cemented femoral stem design on the risk of PFF.

Cite this article: Bone Joint J 2024;106-B(1):11–15.

Aims

Periprosthetic fractures (PPFs) following hip arthroplasty are complex injuries. This study evaluates patient demographic characteristics, management, outcomes, and risk factors associated with PPF subtypes over a decade.

Aims

Using data from the Hip Fracture Evaluation with Alternatives of Total Hip Arthroplasty versus Hemiarthroplasty (HEALTH) trial, we sought to determine if a difference in functional outcomes exists between monopolar and bipolar hemiarthroplasty (HA).

Aims

The aim of this study was to radiologically evaluate the quality of cement mantle and alignment achieved with a polished tapered cemented femoral stem inserted through the anterior approach and compared with the posterior approach.

Aims

The prevalence of ipsilateral total hip arthroplasty (THA) and total knee arthroplasty (TKA) is rising in concert with life expectancy, putting more patients at risk for interprosthetic femur fractures (IPFFs). Our study aimed to assess treatment methodologies, implant survivorship, and IPFF clinical outcomes.

Aims

Porous metaphyseal cones can be used for fixation in revision total knee arthroplasty (rTKA) and complex TKAs. This metaphyseal fixation has led to some surgeons using shorter cemented stems instead of diaphyseal engaging cementless stems with a potential benefit of ease of obtaining proper alignment without being beholden to the diaphysis. The purpose of this study was to evaluate short term clinical and radiographic outcomes of a series of TKA cases performed using 3D-printed metaphyseal cones.

Aims

Although good clinical outcomes have been reported for monolithic tapered, fluted, titanium stems (TFTS), early results showed high rates of subsidence. Advances in stem design may mitigate these concerns. This study reports on the use of a current monolithic TFTS for a variety of indications.

Aims

Periprosthetic femoral fractures (PFF) following total hip arthroplasty (THA) are devastating complications that are associated with functional limitations and increased overall mortality. Although cementless implants have been associated with an increased risk of PFF, the precise contribution of implant geometry and design on the risk of both intra-operative and post-operative PFF remains poorly investigated. A systematic review was performed to aggregate all of the PFF literature with specific attention to the femoral implant used.

Cemented femoral stems with force closed fixation designs have shown good clinical results despite high early subsidence. A new triple-tapered stem in this category (C-stem AMT) was introduced in 2005. This study compares this new stem with an established stem of similar design (Exeter) in terms of migration (as measured using radiostereometric analysis), peri-prosthetic bone remodelling (measured using dual energy x-ray densitometry, DXA), Oxford Hip Score, and plain radiographs. . A total of 70 patients (70 hips) with a mean age of 66 years (53 to 78) were followed for two years. Owing to missing data of miscellaneous reasons, the final analysis represents data from 51 (RSA) and 65 (DXA) patients. Both stems showed a typical pattern of migration: Subsidence and retroversion that primarily occurred during the first three months. C-stem AMT subsided less during the first three months (p = 0.01), before stabilising at a subsidence rate similar to the Exeter stem from years one to two. The rate of migration into retroversion was slightly higher for C-stem AMT during the second year (p = 0.03). Whilst there were slight differences in movement patterns between the stems, the C-stem AMT exhibits good early clinical outcomes and displays a pattern of migration and bone remodelling that predicts good clinical performance. Cite this article: Bone Joint J 2015;97-B:755–61

The initial success of modern total hip arthroplasty can in large part be attributed to the reliable fixation of the femoral component with the use of acrylic bone cement. Early success with cement led to a common pathway of development in North America and the European countries. Much of the early to mid-term research concentrated on refinement of variables related to the methodology and technique of cement fixation. Scandinavian registries were subsequently able to report on improved survivorship with better cementing technique. The net effect has been standardisation towards a small number of cemented implants with good long-term outcomes representing the majority of stems implanted in Sweden, for example.

In North America, during the mid-term development of THA in the late 1980's, the term “cement disease” was coined and the cemented THA saw a precipitous decline in use, now to the point where many American orthopaedic residents are completing training never having seen a cemented THA. Modern uncemented femoral components can now claim good long-term survivorship, perhaps now comparable to cemented fixation. However, this has come at a cost with respect to the premium expense applied to the implant itself as well as lineage of failed uncemented constructs. The last several years have seen a proliferation of uncemented implants, usually at a premium cost, with no demonstrated improvement in survivorship. Osteolysis has not been solved with uncemented implants and cement disease has largely been recognised as a misnomer.

Long-term outcomes of cemented femoral fixation have consistently demonstrated excellent survivorship, even in the younger age group. Cemented stems allow for variable positioning of the stem to allow for better soft tissue balancing, without the need for proximal modularity. Cemented stems are more forgiving and fail less often secondary to a reduced incidence of intra-operative complications, such as peri-prosthetic fracture. Cemented stems tend to be less expensive and also have the advantage of adding antimicrobial agents into the cement. This is important in emerging markets. The next iteration of orthopaedic innovation driven by the emerging markets may indeed be back to the future.

Key Points: The initial success of total hip arthroplasty was based on cemented femoral fixation. Long-term outcomes in the United States demonstrate good results for cemented femoral fixation. Despite this, cemented fixation is not frequently used in the United States. Results from multiple national joint replacement registries demonstrate superior long-term performance of cemented femoral fixation. European countries, perhaps because of the excellent results in the national registries, use cemented femoral fixation more often than not. Cemented femoral fixation is cost neutral if not less expensive and allows for the addition of antimicrobials. Cemented femoral fixation is perhaps easier to perform as the component can be potted in a range of positions as opposed to the position being dictated by the femoral anatomy.

Introduction

The orthopaedic market offers more than two hundred different hip femoral stems. Of these, very few have undergone scientific studies with published results. The differences of designs of the stem are mainly related to surface texture and geometry sections. The development of a new cemented hip prosthesis is certainly a very hard task if aiming the improvement of actual performance.

Background. Cemented femoral stems have an excellent long-term outcome. Modern cement techniques should be used to optimize femoral stem fixation. Bleeding from the bone surface during cemented hip arthroplasty compromises the bone-cement interface. However, no studies have examined this bleeding in vivo nor the effect the different cleaning methods used. In the present study we evaluated bleeding patterns and efficacy of cleaning methods used in third generation cementing techniques. Methods. We prospectively performed a medulloscopy with a 10 mm laparoscope in 200 primary hip arthroplasties. Intramedullary bleeding was evaluated after femoral canal preparation and use of the different cleaning methods. The femoral canal was divided into three areas to facilitate comparison. The intramedullary bleeding was standardized on a four point scale. A non-parametric repeated measures ANOVA was used for statistical analysis. Results. Cotton swabs and brushes did not reduce the intramedullary bleeding significantly after broaching of the canal. Compared to these standard cleaning methods, pulsed lavage and the addition of brushing provided better blood removal (p<0.001). There was a trend, although not statistical significant (p=0.24), towards better canal cleaning if a canal filling tampon with suction was added. Arterial bleeding originating from the posterior wall of the canal was noticed in 26 cases (13 percent). These could only be controlled by diathermy tools. Conclusion. Most standard preparation techniques are insufficient to prepare the femoral canal before cement insertion. In case of severe intramedullary bleeding, an arterial bleeding should be ruled out and if necessary treated with the aid of diathermy tools. We recommend pulsed lavage combined with a brush and a canal filling tampon for femoral canal preparation in cemented primary hip arthroplasty for optimal reduction of intramedullary bleeding

Prosthesis migration and acetabular cup wear are useful short term measurement which may predict later implant outcome. However, the significance of the magnitude and pattern of the migration is very much dependent on the specific design studied. This study aimed to characterise patterns of migration by following four cemented femoral stem designs using Radiostereometry (RSA) within a prospective randomised longitudinal trial.

164 patients undergoing cemented femoral hip replacement for osteoarthritis were randomised to receive either an Exeter (Howmedica Stryker), Ultima Tapered Polished Stem (TPS) (Depuy), Ultima Straight Stem (USS) (Johnson and Johnson) or Elite Plus (Depuy) stem. Each subject received the OGEE PE cemented acetabular component (Depuy). RSA examinations were performed at 1 week and 6, 12, 18, 24 and 60 months post surgery. They were analysed using the UMRSA system (RSA Biomedical AB, Umea, Sweden), and our local geometric stem measurement software. 149 patients had RSA measurements available to 2 years, and 96 patients to 5 years. Differences were analysed using mixed linear modelling (SPSS).

Median linear proximal cup wear rate reduced to a minimum of 0.02-0.06mm/year in year two. Between 2 and 5 years the wear rate increased, being significantly higher for the Elite.

Cup migration was small but continuous. At 2 years it was median 0.3mm proximally, increasing to 0.5 mm at 5 years. Median rotations were less than 0.3 degrees.

Proximal migration was positive and increasing at all time points for all stems. For the tapered polished designs, while the overall magnitude was significantly higher, the rate of migration significantly decreased, whereas for the other stem designs it did not.

The TPS stem showed a tendency for posterior tilt which was significant compared to the other stems at 5 years.

All stems tended to retroversion, with the USS significantly less than the others and the Elite showing and relative increase at 5 years.

In summary migration patterns are characterised by the stem design, including where there were only small changes between designs. We are now testing measured migrations as predictors of outcome, and will continue to follow this group of patients to 10 years.

Introduction

Varus positioning of cemented ‘composite beam’ stems is associated with increased risks of aseptic loosening and stem fracture. We investigated whether the incidence of varus malalignment of the Exeter polished, double taper design in a multicentre prospective study adversely affected outcome after total hip replacement (THR).

This was a safety study where the hypothesis was that the newer-design CPCS femoral stem would demonstrate similar early clinical results and micromovement to the well-established Exeter stem. Both are collarless, tapered, polished cemented stems, the only difference being a slight lateral to medial taper with the CPCS stem. A total of 34 patients were enrolled in a single-blinded randomised controlled trial in which 17 patients received a dedicated radiostereometric CPCS stem and 17 a radiostereometric Exeter stem. No difference was found in any of the outcome measures pre-operatively or post-operatively between groups. At two years, the mean subsidence for the CPCS stem was nearly half that seen for the Exeter stem (0.77 mm (−0.943 to 1.77) and 1.25 mm (0.719 to 1.625), respectively; p = 0.032). In contrast, the mean internal rotation of the CPCS stem was approximately twice that of the Exeter (1.61° (−1.07° to 4.33°) and 0.59° (0.97° to 1.64°), respectively; p = 0.048). Other migration patterns were not significantly different between the stems. The subtle differences in designs may explain the different patterns of migration.

Comparable migration with the Exeter stem suggests that the CPCS design will perform well in the long term.

The authors did not receive grants or outside funding in support of their research or preparation of this manuscript. They did not receive any payments or make agreements to provide such benefit from a commercial entity. No commercial entity paid or directed, or agreed to pay or direct, any benefits to any research fund, foundation, educational institution, or other non profit organization with which the authors are affiliated or associated.

Background: We observed early osteolysis and loosening of the rough surface-cement stem with a second generation metal-on-metal articulation. This study was to investigate the possible etiologic role of stem loosening and osteolysis by examination of the surface of the rough blast cement and related periprosthetic tissues that have been retrieved at revision.

Methods: We retrospectively analyzed 39 hips (37 patients) with use of metasul metal-on-metal total hip arthroplasty. Of the femoral stem, rough surface-cement stem used in 18 hips and cementless Ti-alloy stem in 21 hips. The mean duration of follow-up was 10.2 years. Of these eight rough blast cement stem were revised, seven in loosening and one in recurrent dislocation. By using energy disperse spectroscope and back scattered electron image, histologic studies were performed to the samples of periprosthetic tissues. Skin patch tests for metal hypersensitivity were done to select patients.

Results: All of cementless stems and cups showed excellent results at the last follow-up. However, eight cement hips were revised. Light microscopy showed polishing effect on retrieval femoral stem affected by the rotational force. EDS and BSE image revealed that there were abundant cement and related metal particles with size of 5-10μm. However there were few metal particles and had greater size (20–100μm) in periprosthetic tissues. Histologic finding shows perivascular infiltration of lymphocytes and accumulation of macrophages No relation was found between skin patch test and loosening.

Conclusion: These findings raise the possibility that early osteolysis and loosening in patients with metal-on-metal hip replacement were associated with rough blast surface cement stem. These mixed particles such as Fe and Zr maybe trigger lymphocytic reactivity suggestive delayed type hypersensitive reaction. This study suggests that cement stem which have rough blasted surface should be considered in metal-on-metal total hip arthroplasty.

Level of Evidence: Therapeutic level III-1(case-control study). See instructions to authors for a complete description of level of evidence.

We reviewed the results at nine to 13 years of 125 total hip replacements in 113 patients using the monoblock uncemented Morscher press-fit acetabular component. The mean age at the time of operation was 56.9 years (36 to 74). The mean clinical follow-up was 11 years (9.7 to 13.5) and the mean radiological follow-up was 9.4 years (7.7 to 13.1). Three hips were revised, one immediately for instability, one for excessive wear and one for deep infection.

No revisions were required for aseptic loosening. A total of eight hips (7.0%) had osteolytic lesions greater than 1 cm, in four around the acetabular component (3.5%). One required bone grafting behind a well-fixed implant. The mean wear rate was 0.11 mm/year (0.06 to 0.78) and was significantly higher in components with a steeper abduction angle.

Kaplan-Meier survival curves at 13 years showed survival of 96.8% (95% confidence interval 90.2 to 99.0) for revision for any cause and of 95.7% (95% confidence interval 88.6 to 98.4) for any acetabular re-operation.

Cemented, polished, tapered stems have produced excellent results, but some early failures occur in younger patients. The CPS-Plus stem (Plus Orthopedics AG, Switzerland) is a polished double taper with rectangular cross section for improved rotational stability. A unique proximal stem centraliser increases cement pressurisation, assists alignment and creates an even cement mantle.

Radiostereometric analysis has demonstrated linear subsidence in a vertical plane, without any rotation or tilt. These features should improve implant durability. Midterm (5 years) results of a prospective international multicentre study are presented.

Materials and Methods: 222 patients (230 hips) were recruited to this IRB-approved study at three centres in the UK and two in Norway. Clinical and radiographic outcomes were assessed at regular intervals.

Results: 160 hips in 153 patients were available for full clinical and radiographic evaluation. 27 patients have died, 30 patients were unable to attend (outcome known) and 12 patients have not reached 5 years follow-up.

The mean Harris hip score improved from 42 preoperatively to 91. There have been no revisions for aseptic loosening and none of the stems have radiographic evidence of loosening. There has been one revision for deep sepsis. With revision for aseptic loosening as an endpoint, stem survivorship is 100%.

Conclusion: The design of the CPS-Plus stem attempts to address the issues of cement pressurization, rotational stability, and subsidence. Earlier laboratory studies have now been supplemented by this clinical evaluation, performed in a number of different centres by several surgeons, and the midterm results are very encouraging.

Introduction: There has been a renewed interest in metal-on-metal articulation in hip joint Arthroplasty. The reason for having metal-on-metal articulation is to reduce the volume of wear particles that are produced with THR. The outcome of reduced particle formation will hopefully be reduced osteolysis. Methods: We reviewed the results of 139 primary hip arthroplasties (130 patients) performed using Metasul articulation and cemented Weber cup. Six patients were lost to follow-up leaving 133 hips (124 patients) for review with at least 5-year follow-up. The acetabular socket was the cemented Weber cup and Bone grafting of the acetabulum and application of a reinforcement ring was done where necessary. Cemented CF-30 femoral stem was used in all patients but one (PFMR). The study was conducted retrospectively based on the information collected from hospital notes and Orthocom database. Immediate post-operative films were seen to measure the cup and stem inclination and quality of cementing using the Barracks grading system. Results: There were 102 females and 22 males in the cohort. Mean age was 73 years (SD-7.46, range 58–86). Left to right hip ratio was 52:81. Most common Pre-operative diagnosis was Osteoarthritis (103) followed by Intracapsular fracture neck of femur (20). The average follow-up was 7.23 years (range 5–10.9). Mean pre-operative Harris hip score was 42.09 and mean post-operative hip scores were 90.01, 86.84, 87.42 and 84.63 at 1-year, 3-year, 5-year and final follow-up with the corresponding pain scores were 42.9, 41.84, 41.56 and 41.56 respectively. Only two hips were revised for aseptic loosening of the cup with a 93.4% implant survivorship at 12 years. There was no case of aseptic stem loosening. No untoward systemic effects were noted in the cohort. Discussion: We believe that in our study Metasul metal-on-metal articulation has shown satisfactory results with regards to aseptic loosening and reduction in osteolysis in medium-term