Abstract
Background
Cemented femoral stems have an excellent long-term outcome. Modern cement techniques should be used to optimize femoral stem fixation. Bleeding from the bone surface during cemented hip arthroplasty compromises the bone-cement interface. However, no studies have examined this bleeding in vivo nor the effect the different cleaning methods used. In the present study we evaluated bleeding patterns and efficacy of cleaning methods used in third generation cementing techniques.
Methods
We prospectively performed a medulloscopy with a 10 mm laparoscope in 200 primary hip arthroplasties. Intramedullary bleeding was evaluated after femoral canal preparation and use of the different cleaning methods. The femoral canal was divided into three areas to facilitate comparison. The intramedullary bleeding was standardized on a four point scale. A non-parametric repeated measures ANOVA was used for statistical analysis.
Results
Cotton swabs and brushes did not reduce the intramedullary bleeding significantly after broaching of the canal. Compared to these standard cleaning methods, pulsed lavage and the addition of brushing provided better blood removal (p<0.001). There was a trend, although not statistical significant (p=0.24), towards better canal cleaning if a canal filling tampon with suction was added. Arterial bleeding originating from the posterior wall of the canal was noticed in 26 cases (13 percent). These could only be controlled by diathermy tools.
Conclusion
Most standard preparation techniques are insufficient to prepare the femoral canal before cement insertion. In case of severe intramedullary bleeding, an arterial bleeding should be ruled out and if necessary treated with the aid of diathermy tools. We recommend pulsed lavage combined with a brush and a canal filling tampon for femoral canal preparation in cemented primary hip arthroplasty for optimal reduction of intramedullary bleeding.
