The expression of the mechanosensor, integrin αvβ3, is reduced in osteoporotic bone cells compared to controls. MLO-Y4 osteocytes experience altered
During
Mechanical loading has been hypothesized to play an important role in the development, remodeling and in diseases of many skeletal tissues, including cartilage. In order to study the metabolic response of cartilage to physical forces, in vitro systems have often been used because of the precise control with which mechanical loads can be applied. We developed a new mechanical loading system, in which we were able to load the intact femoral condyle in order to preserve the native cartilage/subchondral bone structure. This system represents a more ‚in vivo‘ situation than cartilage explants or chondrocyte cell culture systems. Our approach focused on changes in mRNA expression of type II collagen, type VI collagen, and aggrecan in loaded versus adjacent unloaded cartilage in order to analyse the early response of chondrocytes to well-defined mechanical stresses.
Femoral condyles were obtained from two-year-old cows. The integrity of the cartilage surface was controlled by staining with safranin O. The femoral condyles were compressed in an Instron 8501 material testing machine. Cyclic compression pressure was applied for 2000 cycles in a sinusoidal waveform of 0. 5 Hz-frequency with a peak stress of 0. 2 to12. 5 MPa. Following loading, full depth cartilage sections were cut out and one half immediately frozen in liquid nitrogen for RNA isolation and the other half soaked in 4% paraformaldehyde for paraffin embedding. As control, the adjacent unloaded cartilage was collected and treated in the same way. Total RNA was isolated and changes in mRNA expression were quantitated by competitive quantitative PCR, using an internal standard of a C-terminal truncated version of the corresponding genes. The PCR-reactions were separated by agarose gel electrophoresis and amplified fragments quantified using video-densitometry analysis. The results were expressed as the ratio of mRNA from loaded to unloaded cartilage
Cyclic compression with peak stresses of 12. 5, 6. 3, 2. 5 and 0. 6 MPa lead to a two-fold decrease in the mRNA expression of type II collagen and aggrecan and a threefold decrease of type VI collagen, in consideration of the intra-assay variability of about 30%. Compression with peak stresses of 0. 3 and 0. 2 MPa lead to a three-fold increase of the mRNA expression of type II collagen, a four-fold increase of aggrecan and a slight decrease of type VI collagen. Low compression strength leads to an increase of the mRNA expression of the major components of cartilage, type II collagen and aggrecan, whereas high loading leads to a decrease of the mRNA expression.
The results show that our system can be used to analyze early responses of chondrocytes to well-defined mechanical stresses in an intact cartilage/bone-system and therefore will enable us to investigate the role of physiological and non-physiological high loading on the induction of cartilage degradation and regeneration in joint trauma and osteoarthritis. Since the cartilage/bone samples are incubated in medium during the experiment, this system will also offer us the opportunity to investigate additives to the medium as potential pharmacological therapeutics in osteoarthritis.
Distal arthrogryposis (DA) is a collection of rare developmental disorders characterized by congenital joint contractures. Most arthrogryposis mutations are in muscle- and joint-related genes, and the anatomical defects originate cell-autonomously within the musculoskeletal tissues. However, gain-of-function (GOF) mutations in PIEZO2, a principal mechanosensor in somatosensation, cause DA subtype 5 via unknown mechanisms. We show that expression of a GOF PIEZO2 mutation in proprioceptive sensory neurons mainly innervating muscle spindles and tendons is sufficient to induce DA5-like phenotypes in mice. Overactive PIEZO2 causes anatomical defects via increased activity within the peripheral nervous system during postnatal development. Surprisingly, overactive PIEZO2 is likely to cause joint abnormalities via increased exocytosis from sensory neuron endings without involving motor circuitry. This reveals a role for somatosensory neurons: excessive mechanosensation within these neurons disrupts musculoskeletal development. We also present proof-of-concept that Botox injection or dietary treatment can counteract the effect of overactive PIEZO2 function to evade DA-like phenotypes in mice when applied during a developmental critical period. These approaches might have clinical applications. Beyond this, our findings call attention to the importance of considering sensory
Stimulation of the mechanosensitive ion channel, Piezo1 promotes bone anabolism and SNPs in the Piezo1 locus are associated with changes in fracture risk. Osteocytes function as critical regulators of bone homeostasis by sensing mechanical signals. The current study used a human, cell-based physiological, 3D in vitro model of bone to determine whether loading of osteocytes in vitro results in upregulation of the Piezo1 pathway. Human Y201 MSCs, embedded in type I collagen gels and differentiated to osteocytes for 7-days, were subjected to pathophysiological load (5000 µstrain, 10Hz, 5 mins; n=6) with unloaded cells as controls (n=4). RNA was extracted 1-hr post load and assessed by RNAseq analysis. To mimic mechanical load and activate Piezo1, cells were differentiated to osteocytes for 13 days and treated ± Yoda1 (5µM, 2- and 24-hs, n=4); vehicle treated cells served as controls (n=4). RNA was subjected to RT-qPCR and data normalised to the housekeeping gene, YWHAZ. Media was analysed for IL6 release by ELISA. Mechanical load upregulated Piezo1 gene expression (16.5-fold, p<0.001) and expression of the transcription factor NFATc1, and matricellular protein CYR61, known regulators of Piezo1
Introduction. Fusion represents an effective treatment option in patients affected by end-stage arthritis. To minimise the risk of non-union following fusion, biological preparations such as bone marrow aspirate concentrate (BMAC) are commonly used intra-operatively.
Abstract. Objectives. Osteocytes function as critical regulators of bone homeostasis by sensing mechanical signals. Stimulation of the mechanosensitive ion channel, Piezo1 promotes bone anabolism and deletion of Piezo1 in osteoblasts and osteocytes decreases bone mass and bone strength in mice. This study determined whether loading of osteocytes in vitro results in upregulation of the Piezo1 pathway. Methods. Human MSC cells (Y201), embedded in type I collagen gels and differentiated to osteocytes in osteogenic media for 7-days, were subjected to pathophysiological load (5000 µstrain, 10Hz, 5 mins; n=6) with unloaded cells as controls (n=4). RNA was extracted 1-hr post load and Piezo1 activation assessed by RNAseq analysis (NovaSeq S1 flow cell 2 × 100bp PE reads). To mimic mechanical load and activate Piezo1, Y201s were differentiated to osteocytes in 3D gels for 13 days and treated, with Yoda1 (5µM, 2 hours, n=4); vehicle treated cells served as controls (n=4). Extracted RNA was subjected to RT-qPCR and data analysed by Minitab. Results. Low mRNA expression of PIEZO1 in unloaded cells was upregulated 5-fold following 1-hr of mechanical load (p=0.003). In addition, the transcription factor NFATc1, a known regulator of Piezo1
Introduction. Hyaluronan (HA) is assumed to have a regulatory role in the bone remodelling process by influencing the behaviour of mesenchymal stem cells (MSCs), osteoblasts and osteoclasts. The hyaluronan synthases (HAS1, HAS2 and HAS3) which are responsible for the formation of HA are expressed in human MSCs (hMSCs). Although HAS are only active when they are located in the plasma membrane and an intracellular storage pool of the HAS is assumed, the mechanisms controlling the intracellular traffic of HAS are hardly investigated. Since chitin synthases and cellulose synthases, members of the same enzyme family like the HAS, are regulated by interaction with the cytoskeleton, we hypothesize that HAS interrelate somehow with the cytoskeleton and that their expression, their transport and/or their activity are regulated via
Tendon injuries are a worldwide problem affecting several age groups and stem cell based therapies hold potential for tendon strategies guiding tendon regeneration. Tendons rely on mechano-sensing mechanisms that regulate homeostasis and influence regeneration. The mechanosensitive receptors available in cell membranes sense the external stimuli and initiate
The concept that fluid percolating through bone matrix is the basis for
Adherent cells are known to respond to physical characteristics of their surrounding microenvironment, adapting their cytoskeleton and initiating signaling cascades specific to the type of cue encountered. Scaffolds mimicking native biophysical cues have proven to differentiate stem cells towards tissue-specific lineages and to maintain the phenotype of somatic cells for longer periods of time in culture. Biomaterial-based tendon implants are designed to withstand high physiological loads but often lack the appropriate biochemical, biophysical and biological structure to drive tendon regeneration by populating cells. The objective of this study is to use tendon main component, collagen type I, to create scaffolds that reproduce tendon natural anisotropy and rigidity, in an effort to engineer functional tendon tissue with native organization and strength, able to maintain tenocyte phenotype and to differentiate stem cells towards the tenogenic lineage. Porcine collagen type I in solution was treated with one of the following cross-linkers: glutaraldehyde, genipin or 4-arm polyethylene glycol (4SP). The resulting mixture was poured on micro-grooved (2×2×2 um) or planar PDMS moulds and air-dried to obtain 5 mg/ml collagen films. Surface topography and elastic modulus were analyzed using SEM/AFM and rheometry, respectively. Human tendon cells were cultured on the micro-grooved/planar scaffolds for up to 10 days. Cell morphology, collagen III and tenascin C expression were analyzed by immunocytochemistry. Among the different cross-linkers used, only the treatment with 4SP resulted in scaffolds with a recognizable micro-grooved surface topography. Precise control over the micro-grooved topography and the rigidity of the scaffolds was achieved by cross-linking the collagen with varying concentrations of 4SP (0, 0.5, 1 and 1.5mM) at low pH and temperature. The elastic modulus of the scaffolds cross-linked with 4SP (0.5mM) matched the values previously reported to induce tenogenic differentiation in stem cells (50–90 kPa). Approximately eighty percent of the human tendon cells cultured on the micro-grooved collagen films aligned in the direction of the anisotropy for 10 days in culture, mimicking the alignment of tenocytes in the native tissue. Cell nuclei morphology, known to play a central role in the process of
Introduction. The hierarchical structure of tendon results in a complex mechanical strain environment, with tenocytes experiencing both tension and shear during loading. The
Osteoarthritis (OA) is the most common joint disease, which is characterized by a progressive loss of proteoglycans and the destruction of extracellular matrix (ECM), leading to a loss of cartilage integrity and joint function. During OA development, chondrocytes alter ECM synthesis and change their gene expression profile including upregulation of hypertrophic markers known from the growth plate. Although physiological mechanical loading can support cartilage formation and maintenance, mechanical overload represents one major risk factor for OA development. To date, little is known on how an OA-like hypertrophic chondrocyte phenotype alters the response of cartilage tissue to mechanical loading. The aim of this study was to investigate whether a hypertrophic phenotype change of chondrocytes affects the response to physiological mechanical loading and to reveal differences compared to normal control cartilage. Cartilage replacement tissue was generated using human articular chondrocytes (normal control cartilage, n=3–5) or human mesenchymal stromal cells which develop a hypertrophic phenotype similar to the one observed in OA (OA cartilage model, n=3–6). Cells were seeded in a collagen type I/III carrier and attached to a beta-TCP bone replacement phase, building an osteochondral unit for simulation of natural conditions. After 21 and 35 days of chondrogenic (re)differentiation, a single physiological mechanical compression episode (1 Hz, 25 %, 3 h) was applied, imitating three hours of normal walking in ten-minute intervals. Proteoglycan and collagen synthesis, gene expression and activation of signaling pathways were assessed. Cartilage replacement tissue of both groups had similar proteoglycan and collagen type II content as well as hardness properties. During (re)differentiation, both cell types showed a comparable upregulation of the chondrogenic marker genes COL2A1 and ACAN. As expected, hypertrophic marker genes (COL10A1, ALPL, MEF2C, IBSP) were only upregulated in the OA cartilage model.
Introduction. Low back pain is a major public health problem in our society. Degeneration of intervertebral disc (IVD) appears to be the leading cause of chronic low-back pain [1]. Mechanical stimulations including compressive and tensional forces are directly implicated in IVD degeneration. Several studies have implicated the cytoskeleton in
Purpose and Background. The intervertebral disc is constantly subjected to forces generated by movement. But degeneration can disrupt normal biomechanics, generating uneven and complex loading patterns. Evidence suggests that these forces are converted into voltages through different mechanisms, such as streaming potentials. This implicates voltage-gated ion channels in the biological remodelling response of the disc to loading. These signalling pathways have not been studied, and this incomplete understanding of disc
While the phenomena of bone adaption to mechanical loading has been long observed, the mechanisms governing bone
Osteoporosis affects millions globally and current anti-catabolic treatments are limited by significant side-effects. Osteoporosis arises when skeletal stem cells (SSC) no longer sufficiently replenish osteoblasts, leading to net bone loss. A key regulator of SSC behaviour is physical loading, yet the mechanisms by which SSCs sense and respond to changes in their mechanical environment are virtually unknown. Primary cilia are nearly ubiquitous ‘antennae-like’ cellular organelles that have very recently emerged as extracellular chemo/mechano-sensors and thus, are strong candidates to play an important role in regulating SSC responses in bone. This paper will demonstrate that the SSC primary cilium plays an important role in loading-induced bone formation via initial chemosensation and transduction of the potent chemokine TGFβ1 regulating SSC recruitment to the bone surface and secondly it will be shown that the primary cilium is a cAMP responsive mechanosensor directly regulating SSC
Summary. This study helps to elucidate how ColVI and Dcn within the pericellular matrix (PCM) of differentiating hMSCs directly impacts dynamic cytoskeletal response to load, and demonstrates an important role for the PCM in
Dynamic loading is necessary for the preservation of native cartilage, but mechanical disuse is one major risk factor for osteoarthritis (OA). As post-transcriptional regulators, microRNAs (miRs) represent promising molecules to quickly adjust the cellular transcriptome in a stimulus-dependent manner. Several miR clusters were related to skeletal development, joint homeostasis and OA pathophysiology but whether miRs are associated with mechanosensitivity and regulated by
Osteocytes direct bone adaptation to mechanical loading (e.g., exercise), but the ways in which osteocytes detect loading remain unclear. We recently showed that osteocytes develop repairable plasma membrane disruptions (PMD) in response to treadmill-running exercise, and that these PMD initiate