Aims

Avulsion of the proximal hamstring tendon origin can result in significant functional impairment, with surgical re-attachment of the tendons becoming an increasingly recognized treatment. The aim of this study was to assess the outcomes of surgical management of proximal hamstring tendon avulsions, and to compare the results between acute and chronic repairs, as well as between partial and complete injuries.

To investigate changes in quadriceps and hamstrings muscle groups during sustained isokinetic knee flexion and extension. 125 paediatric participants (45 males and 80 females, mean age 14.2 years) were divided into two groups: participants with a confirmed ACL tear (ACLi, n = 64), and puberty- and activity-level matched control participants with no prior history of knee injuries (CON, n = 61). Participants completed a series of 44 repetitions of isokinetic knee flexion and extension at 90 deg/ sec using a Biodex dynamometer (Biodex Medical Systems Inc, Shirley, New York). Surface EMG sensors (Delsys Incorporated, Natick, MA) simultaneously recorded the quadriceps and hamstring activations. Muscle function was assessed as the change in quadriceps activation and extension torque were calculated using the percent difference between the mean of the first five trials, and the mean of the last five trials. ACLi participants had significantly higher percent change in quadriceps activation for both healthy and injured legs, in comparison to CON dominant leg. As such, the healthy leg of the ACLi participants is activating significantly more than their health matched controls, while also demonstrating reduced muscular endurance (less torque in later repetitions). Therefore, we conclude that the non-injured limb of the ACLi participant is not performing as a healthy limb. Since return to activity clearance following ACLi implies return to sport against age- and activity matched opponents, clearing young athletes based on the non-injured contralateral limb may put them at greater risk of reinjury

Anterior cruciate ligament reconstruction (ACLR) using a semitendinosus (ST) autograft, with or without gracilis (GR), results in donor muscle atrophy and varied tendon regeneration. The effects of harvesting these muscles on muscle moment arm and torque generating capacity have not been well described. This study aimed to determine between-limb differences (ACLR vs uninjured contralateral) in muscle moment arm and torque generating capacity across a full range of hip and knee motions. A secondary analysis of magnetic resonance imaging was undertaken from 8 individuals with unilateral history of ST-GR ACLR with complete ST tendon regeneration. All hamstring muscles and ST tendons were manually segmented. Muscle length (cm), peak cross-sectional area (CSA) (cm. 2. ), and volume (cm. 3. ) were measured in ACLR and uninjured contralateral limbs. OpenSim was used to simulate and evaluate the mechanical consequences of changes in normalised moment arm (m) and torque generating capacity (N.m) between ACLR and uninjured contralateral limbs. Compared to uninjured contralateral limbs, regenerated ST tendon re-insertion varied proximal (+) (mean = 0.66cm, maximum = 3.44cm, minimum = −2.17cm, range = 5.61cm) and posterior (+) (mean = 0.38cm maximum = 0.71cm, minimum = 0.02cm, range = 0.69cm) locations relative to native anatomical positions. Compared to uninjured contralateral limbs, change in ST tendon insertion point in ACLR limbs resulted in 2.5% loss in peak moment arm and a 3.4% loss in peak torque generating capacity. Accounting for changes to both max isometric force and ST moment arm, the ST had a 14.8% loss in peak torque generating capacity. There are significant deficits in ST muscle morphology and insertion points following ST-GR ACLR. The ST atrophy and insertion point migration following ACLR may affect force transmission and distribution within the hamstrings and contribute to persistent deficits in knee flexor and internal rotator strength

Background. Revision total knee arthroplasties (rTKA) are performed with increasing frequency due to the increasing numbers of primary arthroplasties, but very little is known regarding the influence of muscle strength impairments on functional limitations in this population. Objectives. The aim of this study was to assess relationship between muscle strength and functional level in patient with rTKA. Design and Methods. Twenty-three patients (8 males, 15 females) were included in the study with mean age 68.4±10 years. Patients performed 3 performance tests (50-Step Walking Test, 10 Meter Walk Test, 30-Second Chair-Stand Test), and one self-report test (HSS) were preferred to assess patients. The maximum isometric muscle strength of quadriceps femoris and hamstring muscles of all the patients was measured using Hand-Held Dynamometer (HHD). Results. While moderate-to-strong significant correlations was found between quadriceps femoris muscle strength and 30- Second Chair-Stand Test (r=0.390, p=0.049), 50-Step Walking Test (r=−0.530, p=0.005), 10 Meter Walk Test (r=−0.587, p=0.002), there were not significant correlation between HSS knee score and all performance-based tests (p>0.05). Also there were not significant correlation between hamstring muscle strength and all other measurement tests (p>0.05). Conclusion. The moderate-to-strong statistical significant correlation between quadriceps femoris muscle strength and functional performance tests suggests that improved postoperative quadriceps strengthening could be important to enhance the potential benefits of rTKA

The jackaling position within rugby has not been previously described as a mechanism for proximal hamstring injuries. This prospective single surgeon study included 54 professional rugby players (mean age 26 ± 4.8 years) undergoing acute primary surgical repair of complete, proximal hamstring avulsion injuries confirmed on preoperative magnetic resonance imaging. All study patients underwent a standardised postoperative rehabilitation programme. Predefined outcomes were recorded at regular intervals. Mean follow-up time was 17 months (range, 12 months to 24 months) from date of surgery. 51 patients (94.4%) returned to their pre-injury level of sporting activity. Mean time from surgical repair to full sporting activity was 7 months (range, 4 months to 12 months). Zero patients had recurrence of the primary injury. At 1 year after surgery compared to 3 months after surgery, patients had increased mean isometric hamstring muscle strength at 0° (98.4 ± 2.8% vs 88.1% ± 5.4%, p<0.001), 15° (95.9 ± 2.9 vs 88.2 ± 8.1%, p<0.001) and 45° (92.9% ± 4.1% vs 76.8% ± 9.7%, p<0.001), higher mean lower extremity functional scores (77.0 ± 2.3 vs 64.5 ± 4.5, p<0.001), and improved Marx activity rating scores (14.3 ± 1.5 vs 10.7 ± 2.6, p<0.001). Acute surgical repair of proximal hamstring avulsion injuries caused by the contact jackaling position produces high patient satisfaction, high return to preinjury level of sporting activity, with low risk of recurrence at short-term follow-up

Many patients who undergo a total knee arthroplasty (TKA) wish to return to a more active lifestyle. The implant must be able to restore adequate muscle strength and function. However, this may not be a reality for some patients as quadriceps and hamstrings muscle activity may remain impaired following surgery. The purpose of this study was to compare muscle activity between patients implanted with a medial pivot (MP) or posterior stabilized (PS) implant and controls (CTRL) during ramp walking tasks. Fifteen patients were assigned to either a MP (n=9) or PS (n=6) TKA operated by the same surgeon. Nine months following surgery, the 15 patients along with nine CTRL patients completed motion and EMG analysis during level, ramp ascent & descent walking tasks. Wireless EMG electrodes were placed on six muscles: vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), semimembranosus (SM) muscles, gastrocnemius medial head (GM), and gastrocnemius lateral head (GL). Participants completed three trials of each condition. EMG data were processed for an entire gait cycle of the operated limb in the TKA groups, and for the dominant limb in the CTRL group. The maximum muscle activity achieved with each muscle during the level trial was used to normalize the ramp trials. The onset and offset of each muscle was determined using the approximated generalized likelihood ratio. Peak muscle activity (PeakLE), total muscle activity (iEMG), and muscle onsets/offsets were determined for each muscle for the ramp ascent and descent trials. Non-parametric Kruskal Wallace tests were used to test for statistical significance between groups with α=0.05. During the ramp up task, both MP and PS groups had significantly greater PeakLE and iEMG for the hamstring muscles compared to the CTRL, whereas the PS group had significantly greater PeakLE compared with the MP group for the SM muscle. During the ramp down task, both MP and PS groups had significantly greater PeakLE and iEMG for the SM and GL muscles compared to the CTRL. The PS group also had significantly greater iEMG for the BF and VM muscles compared to the CTRL. The MP group had a significantly earlier offset for the SM muscle compared to the CTRL. Stability in a cruciate removing TKA is partially controlled by the prosthetic design. During the ramp up task, the TKA groups compensated the tibial anterior translation by activating their hamstrings more and for a longer duration. The MP group required less hamstrings activation than the PS group. During the ramp down task, TKA patients stiffened their knee in order to stabilize the joint. The quadriceps, hamstrings and GL muscle were activated more and for a longer duration than the CTRL group to protect the tibial posterior translation. The PS group required greater BF and VM iEMG than the MP group. Even if surgery reduced pain, differences in muscle activity exist between TKA patients and healthy controls. The prosthetic design provides some stability to the knee, and the MP implant required less muscle activation than the PS implant to stabilize the knee joint

Introduction. Regular, repeated stretching increases joint range of movement (RoM), however the physiology underlying this is not well understood. The traditional view is that increased flexibility after stretching is due to an increase in muscle length or stiffness whereas recent research suggests that increased flexibility is due to modification of tolerance to stretching discomfort/pain. If the pain tolerance theory is correct the same degree of micro-damage to muscle fibres should be demonstrable at the end of RoM before and after a period of stretch training. We hypothesise that increased RoM following a 3 weeks hamstrings static stretching exercise programme may partly be due to adaptive changes in the muscle/tendon tissue. Materials and Methods. Knee angle and torque were recorded in healthy male subjects (n=18) during a maximum knee extension to sensation of pain. Muscle soreness (pain, creatine kinase activity, isometric active torque, RoM) was assessed before knee extension, and 24 and 48 hours after maximum stretch. An exercise group (n=10) was given a daily home hamstring stretching programme and reassessed after 3 weeks and compared to a control group (n=8). At reassessment each subject's hamstring muscles were stretched to the same maximum knee extension joint angle as determined on the first testing occasion. After 24 hours, a reassessment of maximum knee extension angle was made. Results. At the start of the study RoM was 71.3 ± 10.0 degrees and there was no significant difference between groups. After 3 weeks stretching RoM increased significantly (p=0.01) by 9 degrees; the control group showed no change. Stiffness did not differ for either group. Pain score and RoM were the most sensitive markers of muscle damage and were significantly changed 24 and 48 hours after the initial stretch to end of range, (p<0.005) and (p=0.004) respectively. Discussion. The results show that a 3 week stretching programme causes muscle adaptation resulting in an increase in the extensibility of the hamstring muscle/tendon unit but no change in stiffness. The lack of evidence of muscle damage suggests that participants in the stretching group are likely to have undergone a physical change/adaptation rather than simply an increase in pain threshold

Purpose: To document the recovery of knee function following Medial Collateral Ligament (MCL) injury of the knee. Methods and Results A cohort of 38 consecutive patients with MCL injuries were followed prospectively from the time of injury for a period of one year. There were 13 grade I MCL sprains and 25 grade II sprains. Twelve patients had a concomitant ACL tear. Patients were treated in a hinged knee brace with full extension and 90 degrees of knee flexion for 6 weeks from the date of injury. All patients had an identical rehabilitation programme. Clinical outcome was assessed using two standard functional knee scores (International Knee Documentation Committee (IKDC) score and Knee Outcome Orthopaedic Score (KOOS)). Quadriceps and hamstring muscle function was tested isokinetically using a dynamometer. Outcome assessments were carried out at 2 weeks, 6 weeks, 3 months, 6 months and 1 year. At 2 weeks the average range of motion (ROM) difference from the normal side was 31%. Twenty-five patients (66%) restored a functional range of motion (5–120 degrees) by 6 weeks. Thirty-five patients (92%) had a normal ROM by 3 months. Peak torque, average power and total work of quadriceps and hamstring muscle groups were normal in 4 patients (11%) at 6 weeks. At 3 months 11 patients (29%) had restored normal muscle function. At 6 months 46% of patients had normal muscle function. At 1 year 11 patients (29%) still had abnormalities of muscle function on isokinetic testing. Conclusions: Patients with MCL injuries can be advised that range of motion can be expected to return to normal in the majority of cases by 3 months but muscle function recovers more slowly over 12 months following injury

Introduction. Unicompartmental knee arthroplasty (UKA) currently experiences increased popularity. It is usually assumed that UKA shows kinematic features closer to the natural knee than total knee arthroplasty (TKA). Especially in younger patients more natural knee function and faster recovery have helped to increase the popularity of UKA. Another leading reason for the popularity of UKA is the ability to preserve the remaining healthy tissues in the knee, which is not always possible in TKA. Many biomechanical questions remain, however, with respect to this type of replacement. 25% of knees with medial compartment osteoarthritis also have a deficient anterior cruciate ligament [1]. In current clinical practice, medial UKA would be contraindicated in these patients. Our hypothesis is that kinematics after UKA in combination with ACL reconstruction should allow to restore joint function close to the native knee joint. This is clinically relevant, because functional benefits for medial UKA should especially be attractive to the young and active patient. Materials and Methods. Six fresh frozen full leg cadaver specimens were prepared to be mounted in a kinematic rig (Figure 1) with six degrees of freedom for the knee joint. Three motion patterns were applied: passive flexion-extension, open chain extension, and squatting. These motion patterns were performed in four situations for each specimen: with the native knee; after implantation of a medial UKA (Figure 2); next after cutting the ACL and finally after reconstruction of the ACL. During the loaded motions, quadriceps and hamstrings muscle forces were applied. Infrared cameras continuously recorded the trajectories of marker frames rigidly attached to femur, tibia and patella. Prior computer tomography allowed identification of coordinate frames of the bones and calculations of anatomical rotations and translations. Strains in the collateral ligaments were calculated from insertion site distances. Results. Knee kinematics and collateral ligament strains were quite close to the native situation after both UKA and ACL reconstruction for all motor tasks. Nevertheless, some statistically significant differences were detected, which may be relevant clinically and biomechanically. In general, insertion of a UKA led to a knee joint which was somewhat less adducted (Figure 3), with a medial femoral condyle located slightly higher, confirming previously published findings [2]. These effects were slightly reduced both after cutting as well as after reconstructing the ACL. The joint became somewhat less stable in the AP direction after insertion of a UKA and this instability persisted not only after cutting but even after reconstructing the ACL

Introduction: Reconstruction of ruptured anterior cruciate ligament is a commonly performed orthopaedic procedure. There are many ways of reconstructing this ligament. One method of doing so is to harvest a tendon graft from the hamstring muscles and use it as part of the reconstruction. The tendon is usually harvested by passing a tendon stripper along the length of the tendon from an anterior knee incision. The semitendinosus and the gracilis are the hamstring muscles whose tendons are used for this. A recent case study reported injury to the sciatic nerve during the harvest of semitendinosus graft. Although morbidity arising from iatrogenic injury to nerves at the anterior aspect of the knee has been well documented, little has been written about the relationship of the sciatic nerve to the semitendinosus and gracilis in the posterior thigh. This study proposes to look at this anatomical relationship. Method: 20 legs on ten cadavers underwent the same dissection to expose the semitendinosus tendon, gracilis tendon and the sciatic nerve while maintaining their anatomical relationships. In all cases the gracilis lay further away from the sciatic nerve than the semiten-dinosus tendon. As the semitendinosus tendon was in between the semitendinosus and the sciatic nerve in all instances it was decided not to measure the distance between gracilis and the sciatic nerve. The distance between the closest point of the sciatic nerve to the tendon of semitendinosus was measured at the joint line and at intervals of 20 mm from the joint line. Results: In 45 % of the subjects the sciatic nerve and the semitendinosus tendon gradually moved further apart as the measurements were taken more proximally in the leg. In 10 % they consistently moved apart from 6 cm from the joint line onwards. In another 10% they moved consistently apart from the 8cm from the joint line measurement and in 15 % they moved apart consistently from 12 cm from the joint line. In the remaining 20 % the sciatic nerve and the semitendinosus tendon did not consistently move apart from each other until after 14 cm from the joint line. In one subject (a female of small stature) it was noted that the semitendinosus muscle lay almost directly upon the sciatic nerve. In 6 subjects the minimum distance between the sciatic nerve and the semitendinosus tendon was less than 18mm. In one subject the distance between the sciatic nerve and the semitendinosus tendon was found to be 10 mm at the closest point and remained in close proximity for a further 4 cm. Conclusion: In 55 % of our patients the sciatic nerve did not consistently move further away from the semi-tendinosus tendon as it was measured more proximally. In some subjects the minimum distance between the nerve and the tendon was less than 2 cm. Both these facts would put the sciatic nerve at risk during tendon harvesting if the tendon stripper were to move outside of the tendon during the procedure

Background. In vivo fluoroscopic studies have proven that femoral head sliding and separation from within the acetabular cup during gait frequently occur for subjects implanted with a total hip arthroplasty. It is hypothesized that these atypical kinematic patterns are due to component malalignments that yield uncharacteristically higher forces on the hip joint that are not present in the native hip. This in vivo joint instability can lead to edge loading, increased stresses, and premature wear on the acetabular component. Objective. The objective of this study was to use forward solution mathematical modeling to theoretically analyze the causes and effects of hip joint instability and edge loading during both swing and stance phase of gait. Methods. The model used for this study simulates the quadriceps muscles, hamstring muscles, gluteus muscles, iliopsoas group, tensor fasciae latae, and an adductor muscle group. Other soft tissues include the patellar ligament and the ischiofemoral, iliofemoral, and pubofemoral hip capsular ligaments. The model was previously validated using telemetric implants and fluoroscopic results from existing implant designs. The model was used to simulate theoretical surgeries where various surgical alignments were implemented and to determine the hip joint stability. Parameters of interest in this study are joint instability and femoral head sliding within the acetabular cup, along with contact area, contact forces, contact stresses, and ligament tension. Results. During swing phase, it was determined that femoral head pistoning is caused by hip capsule laxity resulting from improperly positioned components and reduced joint tension. At the point of maximum velocity of the foot (approximately halfway through), the momentum of the lower leg becomes too great for a lax capsule to properly constrain the hip, leading to the femoral component pistoning outwards. This pistoning motion, leading to separation, is coupled with a decrease in contact area and an impulse-like spike in contact stress (Figure 1). During stance phase, it was determined that femoral head sliding within the acetabular cup is caused by the proprioceptive notion that the human hip wants to rotate about its native, anatomical center. Thus, component shifting yields abnormal forces and torques on the joint, leading to the femoral component sliding within the cup. This phenomenon of sliding yields acetabular edge-loading on the supero-lateral aspect of the cup (Figure 2). It is also clear that joint sliding yields a decreased contact area, in this case over half of the stable contact area, corresponding to a predicted increase in contact stress, in this case over double (Figure 2). Discussion. From our current analysis, the causes and effects of hip joint instability are clearly demonstrated. The increased stress that accompanies the pistoning/impulse loading scenarios during swing phase and the supero-lateral edge-loading scenarios during stance phase provide clear explanations for premature component wear on the cup, and thus the importance of proper alignment of the THA components is essential for a maximum THA lifetime. For any figures or tables, please contact authors directly

Introduction. This study explores whether subjects with bicruciate retaining TKRs (BiCR) have more normal knee biomechanics during level walking and stair ascent than subjects with posterior cruciate retaining TKRs (PCR). Due to anterior cruciate ligament (ACL) preservation, we expect BiCR subjects will not show the reduced flexion and altered muscle activation patterns characteristic of persons with TKRs. Methods. Motion and electromyography (EMG) data were collected during level walking and stair climbing for 16 BiCR subjects (4/12 m/f, 65±3 years, 30.7±7.0 BMI, 8/8 R/L), 17 PCR subjects (2/15 m/f, 65±7 years, 30.4±5.1 BMI, 7/10 R/L), and 17 elderly healthy control subjects (8/9 m/f, 55±10 years, 25.8±4.0 BMI, 10/7 R/L), using the point cluster marker set. Surface EMG electrodes were placed on the vastus medialis obliquus (VMO), rectus femoris (RF), biceps femoris (BF), and semitendinosus (ST) muscles. EMG data are reported as percent relative voluntary contraction (%RVC), normalized to the average peak EMG signals during level walking. Statistical nonparametric mapping was used for waveform analysis. Results. Both TKR groups were older, and PCR subjects had higher BMI than control subjects (p≤0.020). The BiCR group walked slower and with shorter stride lengths than controls (p≤0.012). During level walking, BiCR subjects had less knee extension and posterior tibial displacement than controls (95–98%, 96–100% gait cycle, p=0.003, 0.001). PCR subjects showed higher flexion mid-stance than controls (36–44% gait cycle, p=0.001) and more external rotation (66–69% gait cycle, p=0.003). Both TKR groups had smaller extension moment peaks (PCR 5, 59–75, 96%, BiCR 61–78, 95–97% stance, p≤0.007, 0.003) than the control group. The BiCR group had smaller adduction and external rotation moment peaks (20–24%, 10–18% stance, p=0.003, 0.001) compared with controls. During stair climbing, BiCR subjects displayed more external tibial rotation (4–16% stance), more knee abduction (36–52% stance), and a lower adduction moment peak (24–34% stance) compared to healthy controls (p≤0.005). TKR subjects from both groups showed lower flexion moment peaks than controls (PCR 24–35%, BiCR 24–28% stance, p≤0.001, 0.004). For EMG, PCR subjects had more BF activity during stair ascent versus level walking than healthy subjects (56–74% stance, p≤0.001). Discussion. BiCR and PCR showed more similarities than expected. Both had altered kinematics and kinetics compared to controls, suggesting some intrinsic extensor mechanism weakness, possibly an aftereffect of osteoarthritis. The EMG results agreed accordingly, as both TKR groups showed (non-significant) decreased quadriceps activity during stair climbing. Interestingly, PCR subjects also had more BF activity during stair than healthy controls, a trend that is common for both TKR subjects and people with ACL deficiency. On the other hand, although BiCR subjects were significantly more externally rotated in early stance phase for stair climbing, their rotation patterns began to align more closely to those of the healthy control subjects at lower flexion angles where the ACL should come into play. In conclusion, ACL retention in TKRs does not correct the extensor mechanism deficits commonly found in TKR patients, although it has some effect on secondary knee kinematics and hamstring muscle activity

Background. Currently, hip implant designs are evaluated experimentally using mechanical simulators or cadavers, and total hip arthroplasty (THA) postoperative outcomes are evaluated clinically using long-term follow-up. However, these evaluation techniques can be both costly and time-consuming. Fortunately, forward solution mathematical models can function as theoretical joint simulators, providing instant feedback to designers and surgeons alike. Recently, a validated forward solution model of the hip has been developed that can theoretically simulate new implant designs and surgical technique modifications under in vivo conditions. Objective. The objective of this study was to expand the use of this hip model to function as an intraoperative virtual implant tool, thereby allowing surgeons to predict, compare, and optimize postoperative THA outcomes based on component placement, sizing choices, reaming and cutting locations, and surgical methods. Methods. The math model simulates the quadriceps muscles, hamstring muscles, gluteus muscles, iliopsoas muscles, tensor fasciae latae, and an adductor muscle group, as well as the ischiofemoral, iliofemoral, and pubofemoral hip capsular ligaments. The model can simulate resecting, weakening, loosening, or tightening of soft tissues based on surgical techniques. Additionally, the model can analyze a variety of activities, both weight-bearing and non-, including swing and stance phase of gait, deep knee bend, and more. The model was previously validated using telemetric implants and fluoroscopic results from existing implant designs. Results. First, the model tool has capabilities that will allow surgeons to pre- or intra-operatively experiment with various surgical alignments, component designs, sizes, and offsets, as well as reaming and cutting locations. The model tool will incorporate a built-in CT scan bone database which will assist in determining muscle and ligament attachment sites as well as bony landmarks. The model tool can be used to assist in the placement of both the femoral component (Figure 1) and the acetabular cup (Figure 2). Moreover, once the surgeon has decided on the placements of the components, he or she can use the modelling capabilities of the tool to run virtual simulations based on the chosen parameters. The simulations will reveal force and motion predictions of the hip joint based on the current component positioning (Figure 3). The surgeon can then choose to modify the positions accordingly or proceed with the surgery. Discussion. Being able to intraoperatively predict postoperative mechanics will improve the functional outcomes of total hip arthroplasty and reduce the frequency of postoperative complications

Background. While not common in the native hip, occurrences of femoral head separation from the acetabular cup during gait are well documented after total hip arthroplasty. Although the effects of this phenomenon are not well understood, we hypothesize that these atypical kinematics are due to component misalignments that yield uncharacteristic forces on the hip joint that are not present in the native hip. Objective. The objective of this study was to theoretically predict the causes of hip separation during stance phase using forward solution mathematical modelling. Methods. The model simulates the quadriceps muscles, hamstring muscles, gluteus muscles, iliopsoas group, tensor fasciae latae, and an adductor muscle group. Other soft tissues include the patellar ligament and the ischiofemoral, iliofemoral, and pubofemoral hip capsular ligaments. The model was previously validated using telemetric implants and fluoroscopic results from existing implant designs. The model is currently being used to analyze the effects that various surgical alignments have on hip separation. Specifically, this study analyzed 4 different hypothetical patients under the same 87 alignment conditions during stance phase. Alignment conditions include anatomical component alignment, intended acetabular cup medial and superior shifts, unintended cup medial and superior reaming errors, variations in cup version angles, leg length discrepancies, and femoral component offset modifications. Results. During stance phase, it was determined that acetabular cup placement had a much more substantial effect on hip separation than femoral component placement. While neither femoral offset nor leg length discrepancy showed a correlation to hip separation, both medial and superior shifting of the acetabular cup showed a positive trend with increased hip separation. Figure 1 shows a comparison of average hip separation with intended shifts in the cup (0mm, 2mm, or 5mm) plus unintended reaming errors (0mm to 10mm extra) Furthermore, larger intended shifts in cup placement yielded smaller margins of error (Figure 2). Observe in Figure 2 how an increase in the size of the blue region (intended shifting region) correlates to a decrease in size of the green region (allowable error region where hip separation will not occur). It was also determined that cup version angles have less of a defined effect on hip separation, as the relationship between angular position and hip separation varied between patients. Discussion. From our current analysis, the importance of proper alignment of the acetabular cup can be clearly seen. Overall, it has been shown that reaming errors of as low as 2 mm can yield separation magnitudes up to 2 mm (and potentially greater)

The purpose of this study was to compare lower limb muscle activity in patients who underwent a total knee arthroplasty (TKA) with a medial pivot (MP) implant to healthy controls (CTRL) during a stair ascent task. Seven MP (age: 61.4±6.5 years, BMI: 30.0±4.7 kg/m2, 12.4±3.8 months post-surgery) patients who underwent a TKA performed using either a subvastus or medial parapatellar approach were age- and BMI-matched to seven healthy CTRL participants (age: 62.4±4.2 years, BMI: 26.3±2.7 kg/m2) for comparison in this study. Participants underwent electromyography (EMG) analysis while completing a three-step stairs ascent task. Portable wireless surface EMG probes were placed on the vastus lateralis (VL), rectus femoris (RF), vastus medialis (VM), biceps femoris (BF) and semimembranous (SM) muscles of both lower limbs. Peak linear envelope (peakLE) and total muscle activity (iEMG) were extrapolated and normalised to a maximal voluntary contraction. Nonparametric Kruskal Wallace ANOVA tests were used and Wilcoxon rank sum tests were used to identify where significant (p < 0.05) differences occurred. The operated limb had significantly lower iEMG in the VAL, RF and BF muscles, and significantly lower peakLE in the SM muscle compared to the non-operated limb. The operated-limb of the MP group had significantly lower iEMG in the VAL and BF muscles, and significantly lower peakLE in the VAL, RF and SM muscles compared to the CTRL group. The non-operated limb in the MP group had significantly larger peakLE and iEMG in the RF muscle compared to the CTRL group. Differences in muscle activity between the operated and non-operated limbs in TKA patients with a MP implant demonstrates a compensatory strategy to reduce loading on the operated limb by relying on the non-operated limb. This same strategy has been reported in other studies investigating other functional tasks. This reliance on the non-operated limb resulted by having greater peakLE and iEMG in the RF muscle compared to the healthy CTRLs. These differences between limbs could also result from many years of muscle adaptation waiting to receive a knee replacement. In conclusion, TKA patients exhibit discrepancies in muscle activity compared to healthy knees and differences between operated and non-operated limbs. Post-surgery rehabilitation should rely on unilateral strength exercises of the quadriceps and hamstrings muscles to reduce discrepancies to allow for a more balanced muscle activity between limbs

Anterior cruciate ligament (ACL) injuries are among the most common and debilitating knee injuries in professional athletes with an incidence in females up to eight-times higher than their male counterparts. ACL injuries can be career-threatening and are associated with increased risk of developing knee osteoarthritis in future life. The increased risk of ACL injury in females has been attributed to various anatomical, developmental, neuromuscular, and hormonal factors. Anatomical and hormonal factors have been identified and investigated as significant contributors including osseous anatomy, ligament laxity, and hamstring muscular recruitment. Postural stability and impact absorption are associated with the stabilizing effort and stress on the ACL during sport activity, increasing the risk of noncontact pivot injury. Female patients have smaller diameter hamstring autografts than males, which may predispose to increased risk of re-rupture following ACL reconstruction and to an increased risk of chondral and meniscal injuries. The addition of an extra-articular tenodesis can reduce the risk of failure; therefore, it should routinely be considered in young elite athletes. Prevention programs target key aspects of training including plyometrics, strengthening, balance, endurance and stability, and neuromuscular training, reducing the risk of ACL injuries in female athletes by up to 90%. Sex disparities in access to training facilities may also play an important role in the risk of ACL injuries between males and females. Similarly, football boots, pitches quality, and football size and weight should be considered and tailored around females’ characteristics. Finally, high levels of personal and sport-related stress have been shown to increase the risk of ACL injury which may be related to alterations in attention and coordination, together with increased muscular tension, and compromise the return to sport after ACL injury. Further investigations are still necessary to better understand and address the risk factors involved in ACL injuries in female athletes.

Cite this article: Bone Jt Open 2024;5(2):94–100.

Dual mobility (DM) bearing implants reduce the incidence of dislocation following total hip arthroplasty (THA) and as such they are used for the treatment of hip instability in both primary and revision cases. The aim of this study was to compare lower limb muscle activity of patients who underwent a total hip arthroplasty (THA) with a dual mobility (DM) or a common cup (CC) bearing compared to healthy controls (CON) during a sit to stand task. A total of 21 patients (12 DM, 9 CC) and 12 CON were recruited from the local Hospital. The patients who volunteered for the study were randomly assigned to either a DM or a CC cementless THA after receiving informed consent. All surgeries were performed by the same surgeon using the direct anterior approach. Participants underwent electromyography (EMG) and motion analysis while completing a sit-to-stand task. Portable wireless surface EMG probes were placed on the vastus lateralis, rectus femoris, biceps femoris, semitendinosus (ST), gluteus medius and tensor fasciae latae muscles of the affected limb in the surgical groups and the dominant limb in the CON group. Motion capture was used to record lower limb kinematics and kinetics. Muscle strength was recorded using a hand-held dynamometer during maximal voluntary isometric contraction (MVIC) testing. Peak linear envelope (peakLE) and total muscle activity (iEMG) were extrapolated and normalized to the MVIC and time cycle for the sit to stand task. Using iEMG, quadriceps-hamstrings muscle co-activation index was calculated for the task. Nonparametric Kruskal Wallace ANOVA tests and Wilcoxon rank sum tests were used to identify where significant (p < 0.05) differences occurred. The DM group had greater iEMG of the ST muscle compared to the CC (p=0.045) and the CON (p=0.015) groups. The CC group had lower iEMG for hamstring muscles compared to the DM (p=0.041) group. The DM group showed lower quadriceps-hamstrings co-activation index compared to the CON group and it approached significance (p=0.054). The CC group had greater anterior pelvis tilt compared to both DM (p=0.043) and the CON (p=0.047) groups. The DM also had larger knee varus angles and less knee internal rotation compared to both groups, however this never reached significance. No significant differences in muscle strength existed between the groups. Higher ST muscle activity in the DM group is explained by the reduction in internal rotation at the knee joint as the ST muscle was more active to resist the varus forces during the sit-to-stand task. Reduced quadriceps activity in the CC group is explained by increased pelvic anterior tilt as this would shorten the moment arm and muscle length in the quadriceps, ultimately reducing quadriceps muscle activity. The reduced co-activation between quadriceps and hamstrings activity in the DM group compared to the CC and CON groups is related to better hip function and stability. Combining lower co-activation and larger range of motion for the DM group without impingement, this implant seems to offer better prevention against THA subluxation and less wear of the implant

Introduction. Total knee arthroplasty (TKA) is a well proven surgical procedure. Squat and gait motions are common activities in daily life. However, squat motion is known as most dissatisfying motion in activities in daily life after total knee arthroplasty (TKA). Dissatisfaction after TKA might refer to muscle co-contraction between quadriceps and hamstrings. The purposed of this study was to develop squat and gait simulation model and analyses the contact mechanics and quadriceps and hamstring muscle stability. We hypothesized that squat model shows larger contact forces and lower hamstring to quadriceps force ratio than gait model. Materials and Methods. Squat motion and gait model were simulated in musculoskeletal simulation software (AnyBody Modeling System, AnyBody Technology, Denmark). Subject-specific bone models used in the simulation were reconstructed from CT images by Mimics (Materialize, Belgium). The lower extremity model was constructed with pelvis, femur, tibia, foot segments and total knee replacement components: femoral component, tibial insert, tibial tray, and patella component [Fig.1]. The muscle model was consisted of 160 muscle elements. The TKR components used in this study are PS-type LOSPA Primary Knee System (Corentec Co., Ltd, Republic of Korea). Force-dependent kinematics method was used in the simulation. The model was simulated to squat from 15° to 100° knee flexion, in 100 frames. Gait simulation model was based on motion capture and force-plate system. Motion capture and force-plate data were from grand challenge competition dataset. Results / Discussion. Patellofemoral contact forces ranged from 0.18 to 3.78 percent body weight (%BW) and from 0.00 to 1.36 %BW during squat motion and gait cycle, respectively. Patellofemoral contact forces calculated at 30°, 60°, and 90° flexion during squat motion were 0.53, 1.93, and 3.22 %BW, respectively. Wallace et al. also reported patellofemoral contact forces at 30°, 60°, and 90° flexion, which were 0.31, 1.33, 2.45 %BW during squat motion. Our results showed similar results from other studies, however the squat model overestimated the patellofemoral contact forces. Contact stiffness in the simulation model might affected the overestimated contact forces. Hamstring to quadriceps force ratio ranged from 0.32 to 1.88 for squat model, and from 0.00 to 2.54 for gait model. As our hypothesis, squat motion showed larger patellofemoral contact forces. Also, mean hamstring to quadriceps force ratio of squat model were about half than the mean hamstring to quadriceps force ratio of gait model. From the results, possibility exists that unbalanced force of quadriceps and hamstring can affect dissatisfaction after TKA while squat motion is the most dissatisfying motion after TKA. However, muscle stability is not the only factor that can affect dissatisfaction after TKA. In future study, more biomechanical parameters should be evaluated to find meaningful dissatisfying factor after TKA. Conclusion. In conclusion, TKA musculoskeletal models of squat and gait motion were constructed and patellofemoral contact force / hamstring to quadriceps force ratio were evaluated. Patellofemoral mechanics were validated by comparison of previous study. Additional studies are needed to find dissatisfying factor after TKA

Introduction. Currently, knee and hip implants are evaluated experimentally using mechanical simulators or clinically using long-term follow-up. Unfortunately, it is not practical to mechanically evaluate all patient and surgical variables and predict the viability of implant success and/or performance. More recently, a validated mathematical model has been developed that can theoretically simulate new implant designs under in vivo conditions to predict joint forces kinematics and performance. Therefore, the objective of this study was to use a validated forward solution model (FSM) to evaluate new and existing implant designs, predicting mechanics of the hip and knee joints. Methods. The model simulates the four quadriceps muscles, the complete hamstring muscle group, all three gluteus muscles, iliopsoas group, tensor fasciae latae, and an adductor muscle group. Other soft tissues include the patellar ligament, MCL, LCL, PCL, ACL, multiple ligaments connecting the patella to the femur, and the primary hip capsular ligaments (ischiofemoral, iliofemoral, and pubofemoral). The model was previously validated using telemetric implants and fluoroscopic results and is now being used to analyze multiple implant geometries. Virtual implantation allows for various surgical alignments to determine the effect of surgical errors. Furthermore, the model can simulate resecting, weakening, or tightening of soft tissues based on surgical errors or technique modifications. Results. The model revealed PCL weakening leads to paradoxical anterior slide of both femoral condyles. This paradoxical slide reduces maximum flexion and increases knee forces as seen in TKA fluoroscopic studies. Cam/post kinematics in posterior-stabilized designs were also analyzed, revealing cam/post forces increasing linearly with flexion. While cam/post engagement should ideally occur superiorly on the post and move inferiorly throughout knee flexion, fluoroscopy documented implants contacting inferiorly and rolling superiorly with flexion. Thus, a theoretical new implant was simulated to overcome this problem such that TKA design would experience the desired motion, yielding inferior contact in later flexion when forces approach 1.0 × BW. At the hip, the model predicts maximum compressive hip forces of 1.5–2.5 xBW throughout stance phase of gait. The model determines how this force is distributed on the femoral head and acetabular cup throughout the entire activity, allowing wear patterns on implant components to be predicted. During stance phase, the model predicts posterior-to-anterior sliding of the femoral head, with larger magnitudes of motion occurring on the supero-lateral aspect of the cup. The model can predict femoral neck impingement on the acetabular cup and shows that excessive anteversion of the cup leads to the femoral component levering away from the acetabular cup, yielding up to 2.0 mm of hip separation. Conclusions. This study demonstrates the ability of an in-vivo data based forward solution model to evaluate the impact of variation upon implant forces, motion and performance. This will improve understanding of observations such as polyethylene wear, pain associated with excessive soft-tissue forces, subluxation and dislocation, among others. Ultimately, the model could become a theoretical simulator that could evaluate implants much quicker for longer time durations, be less costly and provide comparative analyses when compared to present day experimental simulators

Introduction. Restoration of knee function after total knee arthroplasty (TKA) often entails a balance between normal kinematics and normal knee stability, especially in performing demanding physical activities. The ultra-congruent (UC) knee design prioritizes stability over kinematics through close conformity between the femoral component and the tibial insert in extension. This configuration is intended to provide AP stability in the absence of the posterior cruciate ligament during activities that would otherwise cause anterior femoral subluxation. In this study we examine the kinematics of an ultra-congruent knee design in comparison with the intact knee and with conventional articulations used in PCL-retaining (CR) and PCL-substituting (PS) TKR designs. Materials and Methods. The 3D tibio-femoral kinematics of 6 fresh frozen cadaveric human knees were tested during loaded simulation of squatting in a computer-controlled knee testing rig. Muscle forces were simulated by loading rectus femoris and vastus intermedius (150N), vastus lateralis (100N), vastus medialis (75N), and the hamstring muscles (60N) (total: 385N). Testing was performed on the intact knee, and after implanting a standard design of total knee prosthesis with the posterior cruciate ligament intact (CR-TKA), resected (PCL-substituting insert; PS-TKA), and a UC insert (UC-TKA group). The 3D positions of the tibia and femur were tracked with a high resolution 12 camera motion analysis system (Motion Analysis Inc.) and used to position 3D CT reconstructions of each bone. The translation and rotation of the femur with respect to the tibia were calculated by projecting the femoral transcondylar axis onto a plane normal to the longitudinal anatomical axis of the tibia coincident with the transverse axis of the tibial plateau. Results. In full extension, the femur was displaced posteriorly by 14.2 ±7.0 mm compared to the intact knee (p<0.01). There was minimal posterior translation (±3mm) of the medial condyle with all 3 inserts designs, and minimal (0–3mm) translation of the lateral condyle from 0–90 degrees with both the UC and PS inserts. From 0–30 degrees flexion, the femoral component translated anteriorly by approx. 5mm without axial rotation. Beyond 30 degrees, the tibia rotated internally by a total of 11 degrees (30–120degs). This was associated with approx. 5mm of rollback of the lateral condyle and 5mm of anterior translation of the medial condyle. There was significant difference in tibial rotation between the UC-TKA group and the intact knee group (p<0.01 in UC-TKA group at 15, 30, 45, and 60°). The rotation patterns of the three designs of TKA were similar during flexion from 0–120 degrees. This was markedly different than the intact knees. Conclusions. The UC TKA demonstrated minimal AP translation with flexion averaging approx. 6mm of posterior rollback laterally, and 3mm of anterior translation medially from 0–120 degrees. This differential translation was associated with 9degrees of internal rotation pattern, similar to that of the PS insert. The clinical success of the UC design and its popularity with patients as an alternative to the PS-TKA suggests that AP stability in extension, and not posterior rollback in flexion, is a critical element in patient satisfaction after TKR