Aims. The distal radius is a major site of osteoporotic bone loss resulting in a high risk of fragility fracture. This study evaluated the capability of a cortical index (CI) at the distal radius to predict the local bone mineral density (BMD). Methods. A total of 54 human cadaver forearms (ten singles, 22 pairs) (19 to 90 years) were systematically assessed by clinical radiograph (XR), dual-energy X-ray absorptiometry (DXA), CT, as well as high-resolution peripheral quantitative CT (HR-pQCT). Cortical bone thickness (CBT) of the distal radius was measured on XR and CT scans, and two cortical indices mean average (CBTavg) and gauge (CBTg) were determined. These cortical indices were compared to the BMD of the distal radius determined by DXA (areal BMD (aBMD)) and HR-pQCT (volumetric BMD (vBMD)). Pearson correlation coefficient (r) and intraclass correlation coefficient (ICC) were used to compare the results and degree of reliability. Results. The CBT could accurately be determined on XRs and highly correlated to those determined on CT scans (r = 0.87 to 0.93). The CBTavg index of the XRs significantly correlated with the BMD measured by DXA (r = 0.78) and HR-pQCT (r = 0.63), as did the CBTg index with the DXA (r = 0.55) and HR-pQCT (r = 0.64) (all p < 0.001). A high correlation of the BMD and CBT was observed between paired specimens (r = 0.79 to 0.96). The intra- and inter-rater reliability was excellent (ICC 0.79 to 0.92). Conclusion. The cortical index (CBTavg) at the distal radius shows a close correlation to the local BMD. It thus can serve as an initial screening tool to estimate the local bone quality if quantitative BMD measurements are unavailable, and enhance decision-making in acute settings on fracture management or further osteoporosis screening. Cite this article: Bone Joint Res 2021;10(12):820–829

Aims. Giant cell tumour of bone (GCTB) treatment changed since the introduction of denosumab from purely surgical towards a multidisciplinary approach, with recent concerns of higher recurrence rates after denosumab. We evaluated oncological, surgical, and functional outcomes for distal radius GCTB, with a critically appraised systematic literature review. Methods. We included 76 patients with distal radius GCTB in three sarcoma centres (1990 to 2019). Median follow-up was 8.8 years (2 to 23). Seven patients underwent curettage, 38 curettage with adjuvants, and 31 resection; 20 had denosumab. Results. Recurrence rate was 71% (5/7) after curettage, 32% (12/38) after curettage with adjuvants, and 6% (2/31) after resection. Median time to recurrence was 17 months (4 to 77). Recurrences were treated with curettage with adjuvants (11), resection (six), or curettage (two). Overall, 84% (38/45) was cured after one to thee intralesional procedures. Seven patients had 12 months neoadjuvant denosumab (5 to 15) and sixmonths adjuvant denosumab; two recurred (29%). Twelve patients had six months neoadjuvant denosumab (4 to 10); five recurred (42%). Two had pulmonary metastases (2.6%), both stable after denosumab. Complication rate was 18% (14/76, with 11 requiring surgery). At follow-up, median MusculoSkeletal Tumour Society score was 28 (18 to 30), median Short Form-36 Health Survey was 86 (41 to 95), and median Disability of Arm, Shoulder, and Hand was 7.8 (0 to 58). Conclusion. Distal radius GCTB treatment might deviate from general GCTB treatment because of complexity of wrist anatomy and function. Novel insights on surgical treatment are presented in this multicentre study and systematic review. Intralesional surgery resulted in high recurrence-rate for distal radius GCTB, also with additional denosumab. The large majority of patients however, were cured after repeated curettage. Cite this article: Bone Jt Open 2022;3(7):515–528

Aims. The aim of this trial was to assess the cost-effectiveness of a soft bandage and immediate discharge, compared with rigid immobilization, in children aged four to 15 years with a torus fracture of the distal radius. Methods. A within-trial economic evaluation was conducted from the UK NHS and personal social services (PSS) perspective, as well as a broader societal point of view. Health resources and quality of life (the youth version of the EuroQol five-dimension questionnaire (EQ-5D-Y)) data were collected, as part of the Forearm Recovery in Children Evaluation (FORCE) multicentre randomized controlled trial over a six-week period, using trial case report forms and patient-completed questionnaires. Costs and health gains (quality-adjusted life years (QALYs)) were estimated for the two trial treatment groups. Regression was used to estimate the probability of the new treatment being cost-effective at a range of ‘willingness-to-pay’ thresholds, which reflect a range of costs per QALY at which governments are typically prepared to reimburse for treatment. Results. The offer of a soft bandage significantly reduced cost per patient (saving £12.55 (95% confidence interval (CI) -£5.30 to £19.80)) while QALYs were similar (QALY difference between groups: 0.0013 (95% CI -0.0004 to 0.003)). The high probability (95%) that offering a bandage is a cost-effective option was consistent when examining the data in a range of sensitivity analyses. Conclusion. In addition to the known clinical equivalence, this study found that the offer of a bandage reduced cost compared with rigid immobilization among children with a torus fracture of the distal radius. While the cost saving was small for each patient, the high frequency of these injuries indicates a significant saving across the healthcare system. Cite this article: Bone Joint J 2024;106-B(6):623–630

Aims of study. To assess and compare the functional, radiological and cosmetic results as well as patient satisfaction in patients treated with the IMN Device Vs Volar Locking Plate. Method. All patients who presented to our institution with extra articular distal radius fractures and met the inclusion criteria were invited to take part in the study. The patients were randomly allocated to two groups, those who underwent intramedullary (IMN) distal radius fixation using the Sanoma Wrx Distal radius nail and those who underwent fixation using a volar locking plate. The patients were then followed up at 2 weeks, 6 weeks, 3 months, 6 months and 1 year. The radiological parameters, ie radial height, inclination and tilt were compared as well as the functional outcomes by means of DASH score. The range of motion of the wrist was compared as well as the scar size. Complications were reviewed. Results. We present our early results. Currently we have included 9 patients in the IMN group and 7 patients in the volar plate group with follow-ups longer than 3 months. Results show smaller scars (2.5 vs 6.7cm), comparable flexion and extension (40 vs 40 and 45 vs 40), slight improvements in pronation and supination (80 vs 75 and 85 vs 80) in the IMN compared to the volar plate. Radial and ulnar deviation is comparable. The radiological parameters showed slight improvements in the radial height (2.5 vs 2.2 mm), inclination (3.6 vs 3.2 degrees) and tilt 13,7 vs 12 degrees) with the IMN. Dash scores will be compared at 6 months. Conclusion. Intra medullary nailing of the distal radius seems to compare to volar plating in terms of radiological parameters and rotational stability but has the added benefit of early range of motion, minimal invasive technique, less post op pain and less complications such as tendon irritation. NO DISCLOSURES

Extensor tendon ruptures have been reported in up to 8.8% of patients after volar plating and long screws have been implicated. The dihedral dorsal surface of the distal radius hinders accurate screw length determination using standard radiographic views (lateral; pronation and supination). A ‘dorsal tangential’ view has recently been described, but has not been validated. To validate this view, we mounted a plate-instrumented sawbone onto a jig. Radiographs at different angles were reviewed independently by 11 individuals. Skyline views clearly demonstrated all screw tips, whereas only 69% of screw tips were identifiable on standard views. With screws 2mm proud of the dorsal surface, skyline views detected 67% of long screws (sensitivity). The best of the standard views achieved only 11% sensitivity. At 4mm long, skyline sensitivity was 85%, compared with 25% for standard views. At 6mm long, 100% of long screws were detected on skylines, but only 50% of 8mm long screws were detected by standard views. Inter and intra-observer variability was 0.97 (p=0.005). For dorsal screw length determination of the distal radius, the skyline view is superior to standard views. It is simple to perform and its introduction should reduce the incidence of volar plate-related extensor tendon rupture

Fractures of the distal radius are common, and form a considerable proportion of the trauma workload. We conducted a study to examine the patterns of injury and treatment for adult patients presenting with distal radius fractures to a major trauma centre serving an urban population. We undertook a retrospective cohort study to identify all patients treated at our major trauma centre for a distal radius fracture between 1 June 2018 and 1 May 2021. We reviewed the medical records and imaging for each patient to examine patterns of injury and treatment. We undertook a binomial logistic regression to produce a predictive model for operative fixation or inpatient admission. Overall, 571 fractures of the distal radius were treated at our centre during the study period. A total of 146 (26%) patients required an inpatient admission, and 385 surgical procedures for fractures of the distal radius were recorded between June 2018 and May 2021. The most common mechanism of injury was a fall from a height of one metre or less. Of the total fractures, 59% (n = 337) were treated nonoperatively, and of those patients treated with surgery, locked anterior-plate fixation was the preferred technique (79%; n = 180). The epidemiology of distal radius fractures treated at our major trauma centre replicated the classical bimodal distribution described in the literature. Patient age, open fractures, and fracture classification were factors correlated with the decision to treat the fracture operatively. While most fractures were

Premature growth arrests are an infrequent, yet a significant complication of physeal fractures of the distal radius in children and adolescents. Through early diagnosis, it is possible to prevent clinical repercussions of the anatomical and biomechanical alterations of the wrist. Their true incidence has not been well established, and there exists no consensual systematic monitoring plan for minimising its impacts. The main objective was to evaluate the prevalence of growth arrests after a physeal distal radius fracture. The secondary objective was to identify risk factors in order to better guide clinicians for a systematic follow-up. All patients seen between 2014–2016 in a tertiary orthopaedic clinic were retrospectively reviewed. Inclusion criteria were (one) a physeal fracture of the distal radius (two) adequate clinical/radiological follow-up. Descriptive, Chi-square and binary logistic regression analyses were carried out using SPSS software. One hundred ninety patients (mean age: 12 ± 2.8 years) fulfilled the inclusion criteria. Forty percent (n=76) of the fractures were treated by closed reduction. Premature growth arrest was seen in 6.8% (n=13) and diagnosed at a mean of 10 months post trauma. The logistic regression showed that the initial translation percentage (>30%) (p 25) (p increase the risk of growth arrest. After adjusting for concomitant ipsilateral ulnar injuries, a positive association between physeal complications and fracture manipulation was detected (76.9%, p=0.03). A non-significant trend between premature growth arrest and associated ulnar injury was observed (p=0.054). No association was identified for trauma velocity, fracture type, gender and age, and growth complications. A prevalence of 6.8% of growth arrest was found after a physeal fracture of the distal radius. Fractures presenting with an initial coronal translation > 30% and/or angulation > 25 from normal, as well as those treated by manipulation, have been shown to be at risk for a premature growth arrest of the distal radius. This study highlights the importance of a systematic follow-up after a physeal fracture of the distal radius especially for patients with a more displaced fracture who had a closed reduction performed. An optimal follow-up period should be over 10 months to optimize the detection of growth arrest and treat it promptly, thereby minimizing negative clinical consequences

Distal radius fractures are the most common upper extremity fracture. The incidence is significantly higher in elderly females with osteoporotic bone. When surgery is indicated, volar locking plates (VLPs) allow for rigid fixation particularly in comminuted fractures with poor bone quality. Although numerous studies have shown the importance of plate placement to avoid soft tissue complications associated with volar plate fixation, there has been little evidence on the anatomic fit of current VLPs. Moreover, the effect of gender differences in distal radius morphology on anatomic fitting of VLPs has not been studied. The aim of this study was to evaluate the gender difference in distal radius morphology and the accuracy of the fit of a current VLP to CT-based distal radius models. Segmented CT models of ten female (mean age, 89 ± 5 years), and ten male (mean age, 86 ± 4 years) cadaveric wrists were obtained. Micro-CT models of the DePuy-Synthes 4-hole extra-articular (EA) and 8-hole volar column (VC) distal radius VLPs were created. A 3D visualization software was used to simulate appropriate plate placement on to the distal radius models by a fellowship-trained hand surgeon. Volar cortical angles (VCA) of the medial, middle and lateral portion of the distal radius were measured and compared between genders. The accuracy of the fit of the two VLP designs were quantified using the percentage of the watershed line (WSL) overlapped by the plate (WSL overlap), the distance between the WSL and the most distal aspect of the posterior plate (prominence distance) and the percentage of contact between the plate and bone. There were statistically significant gender differences in medial, middle and lateral VCAs (p=.003 medial, p=.0001 middle, p=.002 lateral). VCA ranged from 28° to 36° in females and from 38° to 45° in males. The WSL overlap did not show statistically significant gender differences (male: 5.9%, female: 13.6%, p=.174). However, the difference in prominence distance between different genders approached statistical significance (male: 3.5mm, female: 2.6mm, p=.087). Contact mapping between the plate and bone did not demonstrate a perfect contact in any of our specimens. Thus, contact measurements were categorized into 0.1mm, 0.2mm, and 0.3mm threshold contacts. There were no statistically significant gender differences in any of the threshold categories (0.1mm: p=.84, 0.2mm: p=.97, 0.3mm: p=.99). Our results confirm that there are gender differences in distal radius morphology. Current plate designs incorporate a VCA of 25° which does not match the native VCA of the distal radius in males or females. Although the difference in prominence distance approached statistical significance, there were no statistically significant gender differences in the WSL overlap or the contact threshold values. This lack of statistical significance may be related to the small sample size. This study proposes novel methods of assessing the anatomic fit of current VLPs in a 3D CT-based model that may be used in future studies with a larger sample size. Moreover, this study demonstrated the importance of considering gender differences in distal radius morphology in the design of future generations of implants

Distal radius fractures are the most common upper extremity injury, and are increasingly being treated surgically with pre-contoured volar-locking plates. These plates are favored for their low-profile template while allowing for rigid anatomic fixation of distal radius fractures. The geometry of the distal radius is extremely complex, and little evidence within the medical literature suggests that current implant designs are anatomically accurate. The main objective of this study is to determine if anatomic alignment of the distal radii corresponds accurately with modern volar-locking plate designs. Additionally, this study will examine sex-linked differences in morphology of the distal radius. Segmented CT models of ten female cadaver (mean age, 88.7 ± 4.57 years, range, 82 – 97) arms, and ten male cadaver (mean age, 86 ± 3.59 years, range, 81 – 91) arms were created. Micro CT models were obtained for the DePuy Synthes 2.4mm Extra-articular (EA) Volar Distal Radius Plate (4-hole and 5-hole head), and 2.4mm LCP Volar Column (VC) Distal Radius Plate (8-hole and 9-hole head). Plates were placed onto the distal radii models in a 3D visualization software by a fellowship-trained orthopaedic hand surgeon. The percent contact, volar cortical angle (VCA), border and overlap of the watershed line (WSL) were measured. Both sexes showed an increase in the average VCA measure from medial to lateral columns which was statistically significant. Female VCA ranged from 28 – 36 degrees, and 38 – 45 degrees for males. WSL overlap ranged from 0 – 34.7629% for all specimens without any statistical significance. The average border distance for females was 2.58571 mm, compared to 3.52411 mm for males, with EA plates having a larger border than VC plates. The border distances had statistically significant differences between the plate types, and was approaching significance between sexes. Lastly, a maximum percent contact of 21.966 % was observed in specimen F4 at a 0.3 mm threshold. No statistical significance between plate or sex populations was observed. This study investigated the incoherency between the volar cortical angle of the distal radius, and the pre-contoured angle of volar locking plates. It was hypothesized that if the VCA measures between plate and bone were unequal then there would be an increase in watershed line overlap, and decrease in percent contact between the surfaces. Our results agreed with literature, indicating that the VCA of bone was larger than that of the EA and VC pre-contoured plates examined in this study. With distal radius fracture incidences and prevalence on the rise for elderly female patients, it is a necessity that volar locking plates be re-designed to factor in anatomical features of individual patients with a particular focus on sex differences. New designs should focus on providing smaller head sizes that are more accurately tailored to the natural contours of the volar distal radius. It is recommended that future studies incorporate expertise from multiple surgeons to diversify and further understand plate placement strategies

The aim of this study was to determine the floor and ceiling effects for both the QuickDASH and PRWE following a fracture of the distal radius. Secondary aims were to determine the degree to which patients with a floor or ceiling effect felt that their wrist was ‘normal’, and if there were patient factors associated with achieving a floor or ceiling effect. A retrospective cohort study of patients sustaining a distal radius fracture and managed at the study centre during a single year was undertaken. Outcome measures included the QuickDASH, the PRWE, EuroQol-5 Dimension-3 Levels (EQ-5D-3L), and the normal wrist score. There were 526 patients with a mean age of 65yrs (20–95) and 421 (77%) were female. Most patients were managed non-operatively (73%, n=385). The mean follow-up was 4.8yrs (4.3–5.5). A ceiling effect was observed for both the QuickDASH (22.3%) and PRWE (28.5%). When defined to be within the minimum clinical important difference of the best available score, the ceiling effect increased to 62.8% for the QuickDASH and 60% for the PRWE. Patients that achieved a ceiling score for the QuickDASH and PRWE subjectively felt their wrist was only 91% and 92% normal, respectively. On logistic regression analysis, a dominant hand injury and better health-related quality of life were the common factors associated with achieving a ceiling score for both the QuickDASH and PRWE (all p<0.05). The QuickDASH and PRWE demonstrate ceiling effects when used to assess the outcome of fractures of the distal radius. Patients achieving ceiling scores did not consider their wrist to be ‘normal’. Future patient-reported outcome assessment tools for fractures of the distal radius should aim to limit the ceiling effect, especially for individuals or groups that are more likely to achieve a ceiling score

Introduction: Osteonecrosis is a devastating disease which can affect multiple joints including the distal radius. Although there are a number of studies that have reported the clinical outcomes of patients treated for osteonecrosis of the hip, knee, shoulder, and other locations, there are no known studies that have evaluated the outcome of patients who have this disease in the distal radius. The purpose of this study was to assess the characteristics of atraumatic, symptomatic osteonecrosis of the distal radius. In addition, based on reports that have shown the safe and effective use of core decompressions to treat early stages of osteonecrosis in other joints, we assessed whether this treatment modality also would provide pain relief and delay progression of the disease in the distal radius. Methods: A review of 434 osteonecrosis patient records from the past 7 years in our prospectively collected database identified 4 patients (6 wrists) who had the disease in the distal radius. Two of these patients also had the disease in the ulna. All 4 patients were women, and their mean age was 46 years (range, 37 to 52 years). Clinical and radiographic outcomes were assessed at a mean of 39 months (range, 12 to 84) following treatment with core decompression. The clinical evaluations were conducted using the Michigan Hand Outcomes Questionnaire (MHQ). The reported pre-operative MHQ component scores for function, completion of everyday activities, pain, completion of work activities, overall appearance of the hands, and patient satisfaction were compared to the results of the MHQ at final follow-up. Radiographic success of the core decompressions was based on whether there was any progression in the stage of the disease. Results: The most common risk factor for this cohort of patients was corticosteroids with 3 of the 4 patients having reported prior use. Other risk factors included alcohol consumption on a regular basis (n = 2), tobacco abuse (n = 2), blood dyscrasia (n = 2), and systemic lupus erythematosus (n = 1). Additionally, all 4 patients had multifocal osteonecrosis (affecting at least four separate anatomic sites. Overall, the patients reported a mean improvement in MHQ score (from 65% to 84%). Stratified by category, satisfaction improved from 64% to 88%, overall hand function increased from 64% to 81%, and pain was reduced from 60% to 25%, for pre- and post-operative values, respectively. One patient (2 wrists) required additional core decompressions in each wrist at one year following surgery but reported sustained improvement in her MHQ for both wrists at two years following her second core decompressions. There were no complications associated with the core decompressions, and there was no radiographic progression in the stage of the disease in any of the cases. Discussion: Osteonecrosis of the distal radius is rarely found in patients with this disease (< 1%). It can be found in patients with osteonecrosis of other joints who have a symptomatic wrist and may have more than one risk factor. It can be readily diagnosed with x-rays and/or MRI. The results of the present study suggest that core decompression is a safe and effective treatment modality for symptomatic osteonecrosis of the wrist at the distal radius and/or ulna. Although the level of improvement in MHQ varied for each case, all patients reported reduced pain and improved function at final follow-up without any apparent complications. Based on these results, we recommend the use of core decompressions to alleviate the symptoms and to possibly delay the progression of distal radius osteonecrosis

Purpose. Intra-articular fractures of the distal radius are common injuries. Their pathogenesis involves a complex combination of forces, including ligament tension, bony compression and shearing, leading to injury patterns that challenge the treating surgeon. The contribution of the radiocarpal and radioulnar ligaments to articular fracture location has not previously been described. Computed tomography (CT) scanning is an important method of evaluating intra-articular distal radius fractures, revealing details missed on plain radiographs and influencing treatment plans. Methods. We retrospectively reviewed CT scans of acute intra-articular distal radius fractures performed in one institution from June 2001 to June 2008. Forty- five of 145 scans were deemed unsuitable due to poor quality or presence of internal fixation in the distal radius, leaving 100 fractures for review. Fracture line locations were mapped to a standardised distal radius model, and statistically analysed in their relationship to ligament attachment zones. Results. Distal radius articular fracture lines are significantly less likely to occur in the regions of ligament attachment. Conversely, fracture lines are more likely to occur in the gaps between major ligament attachments. Conclusion. Articular fracture locations in the distal radius are significantly related to radiocarpal and radioulnar ligament attachments. This may aid treating surgeons in understanding the personality of a fracture and the role of ligamentotaxis in fracture reduction

We aim to assess the AP distance and teardrop angles in a cohort of normal wrists and to assess their possible use as prognostic indicators in fractures of the distal radius. Two hundred standardised PA and lateral wrist radiographs from uninjured wrists and 95 patients with fractures of the distal radius were assessed and anatomic parameters measured, including the Teardrop angle and AP distance. Clinical assessment at a mean of 6 years post fracture included an assessment of grip strength and range of motion along with the DASH score. The mean teardrop angle in 200 normal wrists was 68 degrees (95%CI:67–69 degrees) and did not differ significantly between sexes (p=0.148). The average teardrop angle at presentation in 95 fractures of the distal radius was 47 degrees (95%CI:41–50 degrees), improving significantly to 58 degrees (95%CI:56–61 degrees, p< 0.0001) post-reduction, and this improvement was maintained at 56 degrees (95%CI:54–59 degrees) at union. The final position was significantly better than at presentation (p< 0.0001). Loss of teardrop angle between the fractured and uninjured wrist was significantly related to reduced grip strength (p=0.04) and worse DASH score (p=0.03). The mean AP distance in 200 normal wrists was 19.6mm (95%CI:19.4–19.9mm) in males and 17.6mm (95%CI:17.2–18.0mm) in females, which is significantly different (p< 0.0001). The mean AP Distance at presentation in 95 fractures of the distal radius was 21.0mm (95%CI:20.4–21.7mm), which improved significantly to 19.6 (95%CI:19.1–20.2mm, p< 0.0001), but subsequently worsened to 20.8mm (95%CI:20.2–20.4mm) at union. This is not significantly better than at presentation (p=0.397). An increase in AP distance in the fractured wrist correlated to loss of range of motion (p< 0.01). The value of these parameters is that they offer quite detailed assessment of the articular surface of the distal radius in the absence of more detailed imaging. They appear to be of prognostic value

Purpose of the study: Since 2001, we have used arthroscopy systematically to control the treatment of distal radius fractures. We report our three years experience. Material and methods: Arthroscopic control was used for all patients aged less than 65 admitted to our unit for treatment of an articular fracture of the distal radius. The same operator performed all procedures. Fixation methods were: K-wire pinning, locked plating (Synthes) or a combination of these two methods. The arthro-scope had a 2.4 mm optic. Bony lesions were noted according to the Cataign, Fernandez and AO classifications. The DASH, Green and O’Brien, and PWRE scores were noted. Results: Intraoperative arthroscopic control was performed for 61 patients between November 2001 and November 2004. Mean follow-up was 17 months (range 6–36 months). Arthroscopic exploration revealed: scapholunate ligament tears (n=11), lunotriquetral ligament injuries (n=3), pathological perforations of the triangle complex (n=4), damage to the radial cartilage (n=15), and mirror involvement of the carpal cartilage (n=4). An arthroscopic procedure was necessary to treat a bone or ligament lesion in 28 cases. At last follow-up, the DASH score was 19.3 and the PWRE 37.6. Discussion: Arthroscopic evaluation of articular fractures of the distal radius, a routine practice in English-speaking countries, remains a limited practice in France. There is nevertheless a real advantage of using intraoperative arthroscopy. The particular anatomy of the radial surface makes it impossible to achieve proper assessment on the plain x-ray for a quality reduction of the fracture. Recent ligament injuries are rarely detectable on a wrist x-ray. An intra-articular stair-step or an untreated ligament injury can pave the way to short-term development of osteoarthritic degeneration. Intraoperative arthroscopic control is the only way to diagnosi and treat these osteoligamentary lesions observed in patients with an articular fracture of the distal radius. For us, non use of intraoperative arthroscopy constitutes a lost chance for patients with an articular fracture of the distal radius

Perioperative glucocorticoids have been used as a successful non-opioid analgesic adjunct for various orthopaedic procedures. Here we describe an ongoing randomized control trial assessing the efficacy of a post-operative methylprednisolone taper course on immediate post-operative pain and function following surgical distal radius fixation. We hypothesize that a post-operative methylprednisolone taper course following distal radius fracture fixation will lead to improved patient pain and function. This study is a randomized control trial (NCT03661645) of a group of patients treated surgically for distal radius fractures. Patients were randomly assigned at the time of surgery to receive intraoperative dexamethasone only or intraoperative dexamethasone followed by a 6-day oral methylprednisolone (Medrol) taper course. All patients received the same standardized perioperative pain management protocol. A pain journal was used to record visual analog pain scores (VAS-pain), VAS-nausea, and number of opioid tablets consumed during the first 7 post-operative days (POD). Patients were seen at 2-weeks, 6-weeks, and 12-weeks post-operatively for clinical evaluation and collection of patient reported outcomes (Disabilities of the Arm, Shoulder and Hand Score [qDASH]). Differences in categorical variables were assessed with χ2 or Fischer's exact tests. T-tests or Mann-Whitney-U tests were used to compare continuous data. Forty-three patients were enrolled from October 2018 to October 2019. 20 patients have been assigned to the control group and 23 patients have been assigned to the treatment group. There were no differences in age (p=0.7259), Body Mass Index (p=0.361), race (p=0.5605), smoking status (p=0.0844), or pre-operative narcotic use (p=0.2276) between cohorts. 83.7% (n=36) of patients were female and the median age was 56.9 years. No differences were seen in pre-operative qDASH (p=0.2359) or pre-operative PRWE (p=0.2329) between groups. In the 7 days following surgery, patients in the control group took an average of 16.3 (±12.02) opioid tablets, while those in the treatment group took an average of 8.71 (±7.61) tablets (p=0.0270). We see that significant difference in Opioid consumption is formed at postoperative day two between the two groups with patients in the control group taking. Patient pain scores decreased uniformly in both groups to post-operative day 7. Patient pain was not statistically from POD0 to POD2 (p=0.0662 to 0.2923). However, from POD4 to POD7 patients receiving the methylprednisolone taper course reported decreased pain (p=0.0021 to 0.0497). There was no difference in qDASH score improvement at 6 or 12 weeks. Additionally, no differences were seen for wrist motion improvement at 6 or 12 weeks. A methylprednisolone taper course shows promise in reducing acute pain in the immediate post-operative period following distal radius fixation. Furthermore, although no statistically significant reductions in post-operative opioid utilization were noted, current trends may become statistically significant as the study continues. No improvements were seen in wrist motion or qDASH and continued enrollment of patients in this clinical trial will further elucidate the role of methylprednisolone for these outcomes

Introduction. Getting the distal locking screw lengths right in volar locking plate fixation of distal radius is crucial. Long screws can lead to extensor tendon ruptures whereas short screws can lead to failure of fixation, especially if there is dorsal comminution of the fracture. The aim of our study was to determine the distal radius anatomy in relation to sagittal lengths and distance between dorsal bone edge and extensor tendons based on MRI scan. Method. One hundred consecutive MRI scans of wrist were reviewed by two of the authors on two occasions. All MRI scans were performed for different wrist pathologies except distal radius fractures or tumours. An axial image, two cuts proximal to the last visible articular surface, was selected. Sagittal length at 5 different widths, maximum volar width, radial overhang over distal radio-ulnar joint and the distance between dorsal bone edge and extensor tendons were measured. Results. A total of 120 MRI scans were included of which 74 were women and 46 were men. Mean volar width was 32mm and longest sagittal length was 22 mm (at Lister's tubercle). Length radial to Lister's tubercle was the shortest (17mm) and ulnar sides were 21mm and 29mm. Male measurements were mean 3mm longer than females. Mean radial overhang over DRUJ was 4mm. Distance from bone to tendons was within 2mm of dorsal radius edge. Conclusion. The study provides a reference guide to average screw lengths at different widths of distal radius in males and females. EPL tendon is closest to bone although all the extensor tendons are within 2mm of bone edge and carry a risk of injury from drill and screw placement. DRUJ is also at risk of injury if screws are placed within 4mm of ulnar edge of distal radius

Author presents the experiences with the use of LCP-distal radius plate by the distal radius fractures and by posttraumatic reconstructions of distal radius. The poor functional result concerning the fractures of distal radius fractures and complications by osteosynthesis with LCP 3,5 mm for distal radius and it arises from several factors:. - incorrect indication to the osteosynthesis. - inexperiend operator. - insufficient reposition of fragments and insufficient stabilisation – type C fractures. - incorrect localisation of the plate. - neurological deficit – medianus nerve lesion. - deficient rehabilitation and poor functional treatment. Author looks upon the causes of failure by osteoesynthesis of fractures of distal radius. In the years 2003 –2004 here were operated 29 fractures and 9 posttraumatic reconstructions of distal radius fractures with the LCP – distal radius 3,5 mm plate. The functional results show 63% excellent, 21% good, 7% satisfactory and 9% poor results. All these complications can be prevented by thorough judgment of X-rays and CT scans including the 2D and 3D reconstruction. The perfect reposition of the fragmants with the check on the X-ray C-arm and good localisation of the plate ensures good stability of osteosynthesis. The functional treatment involving the use orthesis or brace and early mobilisation and rehabilitation depend on the well technically performed osteosynthesis ensures a good functional result

Introduction and Aims: Rotational malalignment following fracture of the distal radius results in subluxation of the distal radioulnar joint, alteration of the normal contact area of the ulnar head in the sigmoid notch of the radius, arthrosis, pain, limited pronation and supination and dysfunction. This paper describes the technique for restoration of appropriate rotation, as well as length and angulation following malunion. Method: Eleven cases of derotational osteotomy of the distal radius with low-profile plate fixation have been performed for correction of rotational malalignment with restoration of appropriate articular tilt, length and alignment. In eight cases, the articular surface of the distal ulna was found to be too degenerated to salvage the distal radioulnar joint and resection of the distal ulna with soft tissue reconstruction was performed. Results: Healing of the osteotomy of the distal radius was achieved in all 11 patients. None of the patients undergoing distal resection demonstrated instability of the distal radioulnar joint but one demonstrated distal radioulnar impingement. One patient with a preserved ulnar head demonstrated ulnocarpal abutment and required late secondary ulna head resection. Pre-operative pronation/supination arc was 40 degrees and postoperative arc was 130 degrees. In eight of the 11, pain was rated as zero on a 10-point scale, while the other three ranged between two and five on the same scale. At a two-year follow-up, grip strength measured 80% of the contralateral side while total range of motion measured 76% of the contralateral side. All 11 patients were functional at daily household activities, five out of seven previously working patients were back to work, and all patients felt that their post-operative status was a significant improvement over their pre-operative status. Conclusion: Rotatory malpositioning following distal radius fracture provides significant disability. Derotational osteotomy can be effective in restoring pronation and supination, diminishing pain and increasing function. Late treatment may also require resection of the distal ulnar articular surface due to post-traumatic arthrosis. Soft tissue stabilisation at the time of osteotomy provides stability of the distal radioulnar joint in the majority of cases

It is generally appreciated that the internal structure and external shape of living bone adapt to mechanical stimuli according to Wolff’s law. However, the precise details of bone adaptation to external forces are not fully understood and there has been no previous investigation of the association between specific loading conditions and the skeletal architecture of a particular anatomical area using case-specific observations in a group of individuals. The aim of the present study was to investigate a previously unreported correlation between the maximum wrist joint reaction force and the volar tilt angle of the distal radius using parameters radiographically obtained parameters from normal wrist joints. Using free body analysis of the forces acting on the distal radius for the loading condition that corresponds to the lift of a weight using the supinated hand, the wrist joint reaction force F and the angle formed between the vector of F and the long axis of the radius have been expressed as a function of the lifted weight, the lever-arm of the wrist flexor tendons and that of the lifted weight. Measurements of the volar tilt angle of distal radius and the lever-arms of the flexor tendons and the lifted weight were performed from lateral wrist radiographs of 30 normal wrists. Subsequently, using the equations obtained from free body analysis, the maximum wrist joint reaction force F and the angle that the latter forms with the long axis of the radius were calculated for each the cases. Statistical analysis compared the angle of the maximum wrist force and the volar tilt of the distal radius (two-tailed paired t-test) and correlated (a) the angle of the maximum wrist force and the volar tilt angle and (b) the maximum joint reaction force and the volar tilt angle. Results showed no significant difference (p=0.33, 95% confidence interval −0.64° to 0.22°) but a statistically significant correlation (R. 2. = 0.74, r = 0.86, p < 0.001) between the angle of the maximum wrist force and the volar tilt angle of the distal radius. Additionally, an inverse relationship between the volar tilt angle and the magnitude of the maximum wrist force (R. 2. = 0.71, r =−0.84, p< 0.001) was found. These observations may explain the mechanism of the phylogenetical development of the volar tilt angle and support the ‘minimum effective strain’ theory of adaptive bone remodeling. 1. The importance of accurate restoration of the volar tilt during treatment of distal radius fractures, especially in wrists that are normally characterised by a low volar tilt angle, is also emphasized by the results of the present study