Summary Statement. Tibia plateau split fracture fixation with two cancellous screws is particularly suitable for non-osteoporotic bone, whereas four cortical lag screws provide a comparable compression in both non-osteoporotic and osteoporotic bone. Angle-stable locking plates maintain the preliminary compression applied by a reduction clamp. Introduction. Interfragmentary compression in tibia plateau split fracture fixation is necessary to maintain anatomical reduction and avoid post-traumatic widening of the plateau. However, its amount depends on the applied fixation technique. The aim of the current study was to quantify the interfragmentary compression generated by a reduction clamp with subsequent angle-stable locking plate fixation in an osteoporotic and non-osteoporotic synthetic human bone model in comparison to cancellous or cortical lag screw fixation. Methods. Adult synthetic human tibiae with hard or soft cancellous bone were osteotomised at the lateral tibia plateau creating a split fracture (AO type 41-B1) and fixed with either two 6.5 mm cancellous, four 3.5 mm cortical lag screws or 3.5 mm LCP proximal lateral tibia plate, preliminary compressed by a reduction clamp (n = 5 per group). Interfragmentary compression was measured by a pressure sensor film after instrumentation. One-way analysis of variance (ANOVA) with Bonferroni post hoc correction was performed for statistical analysis (p < 0.05). Results. Applying a reduction clamp, interfragmentary compression was 0.6 MPa ± 0.1 in non-osteoporotic and osteoporotic bone. The locking plate was able to maintain the compression (0.5 MPa ± 0.1) in non-osteoporotic and osteoporotic bone, but it was significantly lower compared to four cortical lag screws (non-osteoporotic p = 0.01; osteoporotic p = 0.03). Comparing four 3.5 mm cortical lag screws, compression was not significantly different between the non-osteoporotic (1.7 MPa ± 0.7) and osteoporotic bone (1.4 MPa ± 0.5). Two 6.5 mm cancellous lag screws achieved significantly higher compression in non-osteoporotic (2.1 MPa ± 0.6) compared to osteoporotic (0.8 MPa ± 0.2, p = 0.01) bone. Conclusion. Preliminary compression applied by a reduction clamp was maintained by angle-stable locking plates. The two 6.5 mm cancellous screw technique would especially be appropriate for young human non-osteoporotic bone, whereas the four 3.5 mm cortical screw configuration could also be applied in osteoporotic bone

Aims

Our objective was to conduct a systematic review and meta-analysis, to establish whether differences arise in clinical outcomes between autologous and synthetic bone grafts in the operative management of tibial plateau fractures.

Purpose. Tibia plateau fractures are severe knee injuries which have a great impact on the patients' lives, but in what extend is not clear yet in the literature. The purpose of this study was to investigate the gait alternations after treatment of patients who had severe tibia plateau fractures which were treated with circular ilizarov frame. Materials & Methods. We have evaluated the gait pattern of patients who were treated with circular Ilizarov frame after severe tibia plateau fractures (Schatzker IV-VI) in our department. The gait was tested by using a force plate in a walking platform. Ground Reaction Forces (GRF) data were collected during level walking at self-selected speeds. The patients performed two walking tasks for each limb and the collected data were averaged for each limb. Demographic, clinical, radiological and quality of life questionnaire (SF-12) data were also collected. Results. We have analysed the gait through the GRF of fifteen patients (aged 50.8 ±17.3 years), who had undergone treatment with circular Ilizarov frame following severe tibia plateau fractures (Schatzker IV-VI). Nine were male and six were female. The tests were performed at an average of 13.2 months after the initial treatment. SF-12 Mental scores have returned to normal (mean 54.6 ±12.3) but physical scores remained impaired (mean 40.6 ±10.8). A one-way repeated measures ANOVA was conducted to compare the GRFs and gait timing data of the affected limb with the normal one. Single limb support interval was significantly reduced to the affected limb (p=0.001) and terminal stance phase was prolonged for the normal limb (p=0.035). During this phase of the gait circle the knee is on its maximum flexion and the quadriceps contracts to bring the femur above the tibia. It seems that these patients during the gait circle reduce the flexion of their affected knee to make their single stance shorter. To the normal limb the patients manage to reduce more the GRFs during the mid-stance phase (F2 force), this difference do not reach significance, but illuminates the tendency of reduced knee flexion in that phase. The rest of the GRF and gait timing data did not had significant differences. Conclusions. One year after severe tibia plateau fracture treated with circular ilizarov frame the patients manage to return to almost normal gait pattern. Reduce single limb stance and terminal stance phase to the affected knee can be explained by the tendency of not flexing their deficient knee as much during that gait phase

Purpose: Problem: Tibia plateau fractures may lead to end-stage post-traumatic arthritis that requires reconstructive surgery. The incidence of this problem is unknown but has been estimated at 20–40% by studies that were limited by small sample sizes, potential follow-up bias, and the limitations of using radiographic arthritis as a chosen outcome (not correlated to function). The use of administrative data bases to follow the care of a large number patients for robust end points such as surgery, offers an opportunity to address these limitations. Purpose: to determine the minimum ten year incidence of post-traumatic arthritis necessitating reconstructive surgery following tibia plateau fractures. Method: We queried our prospectively collected Orthopedic Trauma Data base to identify operatively treated patients with tibia plateau fractures. These cases were cross-referenced with the data from our Province’s administrative health database and tracked over time for the performance of reconstructive knee surgery. Each individual’s exposure/follow-up period was limited by end of health plan coverage on record or date of death from vital statistics data. The minimum follow-up was ten years. Results: Between 1987 and 1994, 378 patients with a tibia plateau fracture were treated at our institution. The average age was 46 years (. sd. =18, range 14–87), while 56% of patients were males. Seventeen out-of-Province residents were excluded, along with forty-six others whose “Medical Services Plan” numbers could not be identified. Of which seven were WCB patients and one who was affiliated with the military. The study cohort therefore consisted of 311 patients with 314 tibia plateau fractures. Four individuals (1.3%) we treated tibia plateau fractures have required reconstructive knee surgery for end-stage post-traumatic knee arthritis at 10 years. Of these 3 of 4 were type VI fractures and 1 of 4 was open. Conclusion: Patients who require surgical treatment of tibia plateau fractures may be counseled on their long-term risk of requiring reconstructive knee surgery for endstage knee arthritis based on a clinical study. Based on our findings, the proportion of those who have required a total knee surgery, ten years following their injury, is lower than previously published

Our objective was to conduct a systematic review and meta-analysis, comparing differences in clinical outcomes between either autologous or synthetic bone grafts in the operative management of tibial plateau fractures: a traumatic pattern of injury, associated with poor long-term functional prognosis. A structured search of MEDLINE, EMBASE, The Bone & Joint and CENTRAL databases from inception until 07/28/2021 was performed. Randomised, controlled, clinical trials that compared autologous and synthetic bone grafts in tibial plateau fractures were included. Preclinical studies, clinical studies in paediatric patients, pathological fractures, fracture non-union or chondral defects were excluded. Outcome data was assessed using the Risk of Bias 2 (ROB2) framework and synthesised in random-effect meta-analysis. Preferred Reported Items for Systematic Review and Meta-Analysis guidance was followed throughout. Six comparable studies involving 352 patients were identified from 3,078 records. Following ROB2 assessment, five studies (337 patients) were eligible for meta-analysis. Within these studies, more complex tibia plateau fracture patterns (Schatzker IV-VI) were predominant. Primary outcomes showed non-significant reductions in articular depression at immediate postoperative (mean difference −0.45mm, p=0.25, 95% confidence interval (95%CI): −1.21-0.31mm, I. 2. =0%) and long-term (>6 months, standard mean difference −0.56, p=0.09, 95%CI: −1.20-0.08, I. 2. =73%) follow-up in synthetic bone grafts. Secondary outcomes included mechanical alignment, limb functionality, defect site pain, occurrence of surgical site infections, secondary surgery, perioperative blood loss, and duration of surgery. Blood loss was lower (90.08ml, p<0.001, 95%CI: 41.49-138.67ml, I. 2. =0%) and surgery was shorter (16.17minutes, p=0.04, 95%CI: 0.39-31.94minutes, I. 2. =63%) in synthetic treatment groups. All other secondary measures were statistically comparable. Our findings supersede previous literature, demonstrating that synthetic bone grafts are non-inferior to autologous bone grafts, despite their perceived disadvantages (e.g. being biologically inert). In conclusion, surgeons should consider synthetic bone grafts when optimising peri-operative patient morbidity, particularly in complex tibial plateau fractures, where this work is most applicable

Abstract. Objective. Bi-condylar tibia plateau fractures are one of challenging injuries due to multi-planar fracture lines. The risk of fixation failure is correlated with coronal splits observed in CT images, although established fracture classifications and previous studies disregarded this critical split. This study aimed to experimentally and numerically compare our innovative fracture model (Fracture C), developed based on clinically-observed morphology, with the traditional Horwitz model (Fracture H). Methods. Fractures C and H were realized using six samples of 4th generation tibia Sawbones and fixed with Stryker AxSOS locking plates. Loading was introduced through unilateral knee replacements and distributed 60% medially. Loading was initiated with six static ramps to 250 N and continued with incremental fatigue tests until failure. Corresponding FE models of Fractures C and H were developed in ANSYS using CT scans of Sawbones and CAD data of implants. Loading and boundary conditions similar to experimental situations were applied. All materials were assumed to be homogenous, isotropic, and linear elastic. Von-Mises stresses of implant components were compared between fractures. Results. Fracture C showed 46% lower static stiffness than Fracture H, and it was 38–59% laxer than Fracture H during cyclic loading. Fractures C and H failed at 368±63N and 593±159N, respectively. Von-Mises stress distributions of locking plates indicated that for Fracture C peak stresses, observed around the proximal-inferior and proximal-threadless holes, were 55% higher than Fracture H's, which occurred around the kick-stand hole. The Kick-stand screw of Fracture C demonstrated 65% higher stress than Fracture H's. Conclusions. Experimental outcomes revealed that coronal splits significantly reduced structural stability. Von-Mises stress distributions demonstrated that potential fatigue failure points of implant components depend on the fracture geometry. Therefore, coronal fracture lines should be counted to precisely assess different fixation methods and find the optimum option for this problematic trauma

The vast majority of fractures around the knee will heal with well-done internal fixation. TKA has a role in several scenarios. Acute TKA can be effective for fractures of the distal femur (especially periprosthetic) in very elderly patients where internal fixation attempts are likely to fail. Acute TKA for tibia plateau fractures may have a role in fractures in the elderly with pre-existing DJD and relatively simple fracture patterns. There is very little published literature regarding the outcomes of TKA for acute tibial plateau fracture and caution is advised until more data is available. TKA is commonly indicated for failed fixation and post-traumatic arthritis. Challenges include managing retained hardware, soft tissue injury and contracture, unusual ligamentous imbalances, and multiple prior incisions and/or flaps. Occasionally, a partial hardware removal may be appropriate. If extensive or multiple incisions are needed for hardware removal it may be wise to stage the reconstruction after soft tissue recovery. The available data on TKA for post-traumatic reconstructions generally demonstrate predictable functional improvement but higher complications

Introduction:. Measurement of ankle brachial pressure index is an easy screening test to perform in patients presenting with an acute knee injury. According to Nicardi et al recognition of vascular injury is particularly challenging because vascular compromise may not be immediately associated with clinical signs of ischemia. The aim of the study is to correlate the values of ABPI measurements to CT angiograms and clinical outcome in high energy knee trauma. Materials and Methods:. We reviewed the records of patients admitted to our unit following high energy knee trauma during the period Nov 2012 to Dec 2013. The orthopaedic injuries sustained were 11 knee dislocations, 5 supracondylar femur fractures, 3 high energy tibia plateau fractures (Schatzker 5 and 6) and 4 gunshot injuries. From the records we recorded the nature of the orthopaedic injury, the ABPI, the CT angiogram and the clinical outcome. We excluded all patients with insufficient records and previous vasculopathy. After these exclusions, 23 patients were enrolled for the study. Analysis of the data involved calculating of basic descriptive statistics, including proportional and descriptive measures. T-tests (one-sample and independent) and chi-square tests of independence were employed to investigate the relationship between ABPI and CT angiogram and clinical outcomes. Throughout the statistical analysis cognisance is taken of the relative small sample, and relevant test adjustments made. Results:. A total of 5 of the 23 patients had a significant vascular injury that required vascular intervention. Three patients underwent vascular repair and orthopaedic fixation. One patient had an occult vascular injury and presented with a necrotic limb three days after admission. His delayed CT demonstrated arterial cut off. This patient later went on to have an amputation. The fifth patient presented 12 days post knee dislocation with reduced pulses but the leg was still viable. In these five patients the ABPI value ranged from 0.3 to 0.65. In the remainder the ABPI ranged from 0.91 to 1.4. These 18 patients had a CT angiogram with normal flow and no intimal tears. Conclusion:. In all the patients with vascular sequelae from high energy knee injuries and dislocation the initial ABPI measurement performed well as a screening test for vascular injuries. It can therefore be recommended as a practical investigation in the initial evaluation of knee injuries that has cost and time saving benefits

Introduction. In total knee arthroplasty, the alignment of leg depends on the alignment of the component. In unicompartmental knee arthroplasty, it is determined by the thickness of the implant relative to the bone excised mostly. After initial scepticism, UKA is increasingly accepted as a reliable procedure for unicompartmental knee osteoarthritis with the improvements in implant design, surgical technique and appropriate patient selection. Recently, computer assisted UKA is helpful in accuracy and less invasive procedure. But, fixed bearing or mobile bearing in UKA is still controversy. We compared the early clinical and radiological results of robot-assisted unicompartmental knee arthroplasty using a fixed bearing design versus a mobile type bearing design. Materials and Methods. A data set of 50 cases of isolated compartmental degenerative disease that underwent robot-assisted UKA using a fixed bearing design were compared to a data set of 50 cases using a mobile bearing type design. The operations were performed by one-senior author with the same robot system. The clinical evaluations included the Knee Society Score (knee score, functional score) and postoperative complications. The radiological evaluations was assessed by 3-foot standing radiographs using the technique of Kennedy and White to determine the mechanical axis and femoro-tibial angle for knee alignment. Operative factors were evaluated including length of skin incision, operation time, blood loss, hospital stay and intraoperative complications. Results. There were no statistically significant differences in operation time, skin incision size, blood loss and hospital stay. (p > 0.05) There were no significant differences in Knee Society Scores at last follow up. An average preoperative femorotibial alignment was varus alignment of −1° in both groups. Postoperative patients with fixed-bearing implants had an average +2.1° valgus and the patients with mobile bearing implants had +5.4° valgus in femorotibial alignment, which was different.(p<0.05) There was one case of medial tibia plateau fracture in fixed bearing group in 3 months postoperatively. And there were one case of liner dislocation with unstable knee in 6 weeks postoperatively and one case of femoral component loosening in 1 year postoperatively in mobile bearing group. There was no intraoperative complication. The average preoperative knee score was 45.8, which improved to 89.5 in fixed bearing group and 46.5, which improved to 91.2 in mobile bearing group at last followup. The average preoperative function score was 62.4 which improved to 86.5 in fixed bearing group and 60.7 which improved to 88.2 in mobile bearing group at last followup. Conclusion. In ourearly experience, two types of bearing of robot-assisted UKA groups showed no statistical differences in clinical assessment but there was statistical difference in postoperative radiological corrected alignment. But in aspect of early complications, we think that mobile bearing seems to be requiring more attention in surgery

Aims: Propose of this study is to evaluate the results of mini open surgical technique in treatment of tibial plateau fractures. Methods: Between September 1999 and September 2000, 10 patients (6 men, 4 women) with closed tibia plateau fractures were treated with arthroscopic and mini open surgical technique. The mean age was 48 (range 28–72 years). The mean follow-up was 26 months (range 20 months to 36 months). Schatzker classiþcation system was used for evaluation and classiþcation of the fracture patterns. Hence, three cases were type 1, four were type 2 and three cases were type 3. The arthroscopy was done in all the cases. No meniscus tears were found in all the patients. The plateau fracture has been reconstructed with elevation, through an antero-medial window in the proximal metaphysis of the tibia, with a particular carrot system. No autograft bone was adopted. We used a percutaneous þxation with AO cannulated screws (1–3 screws). Results: The results were evaluated with the HSS Knee Score System. There were no preoperative and postoperative complications. The results were 80% excellent, 20% good. The average of the Knee Score was 94 (range 78–100) and the average of the Functional Score was 96 (range 80–100). Conclusions: The arthroscopy and the mini open surgical technique create a complete anatomical reduction of articular fractured area with no graft

Objective. To determine differences in fracture stability and functional outcome between synthetic bone graft and allograft/autograft with internal fixation of tibia plateau metaphyseal defects. Patient & Methods. Between 2007- 2008, 84 consecutive cases of internal fixation of tibia plateaux were identified from our theater logbook. 29 patients required additional autologous, allogenic bone graft, or synthetic bone graft substitute to ensure fracture stability. 5 patients were excluded due to lost to follow up leaving a cohort of 24 patients. Hydroxyapatite calcium carbonate synthetic bone graft was utilised in 14 patients (6 male and 8 female). Allograft/autograft were utilised in the remaining 10 patients (6 male and 4 female). All 24 patients had closed fractures, classified using the AO and Schatzker classification. Roentograms at presentation, post-operatively and regular follow-up till 12 months were analysed for maintenance of reduction, early and late subsidence of the articular surface. Functional outcomes such as knee range of movement and WOMAC Knee scores were compared between groups. Results. There was no significant statistical difference between groups for post-operative joint reduction, long term subsidence, and WOMAC scores. The degree of subsidence was not related to age or fracture severity. Maintenance of knee flexion was found to be better in the allograft/autograft group (p=0.015) when compared between groups. Multivariate analysis compared graft type, fracture severity, postoperative reduction, subsidence rate, range of movement and WOMAC score. The only finding was a statistical significant (p=0.025) association with the graft type and range of movement. Conclusion. Allograft/autograft may allow better recovery of long-term flexion, possibly due to reduced inflammatory response compared with synthetic bone graft. However, all other parameters such as maintenance of joint reduction and subjective outcome measures were comparable with the use of hydroxyapatite calcium carbonate bone graft. This study shows that synthetic bone graft is a suitable option in fixation of unstable tibia plateau fractures, avoiding risk of viral disease transmission with allograft and donor site morbidity associated with autograft

Anatomic reduction and appropriate implant placement is essential for optimal treatment of intraarticular tibial plateau fractures. Standard intraoperative fluoroscopy provides limited visualization of the reduction and hardware placement compared with pre- or postoperative 3-D imaging modalities. As such, post-operative computer tomography (CT) has become a common procedure to evaluate the quality of the reduction and fixation. The Iso-C3D provides 3-D intraoperatively imaging to dynamically assess the surgical reduction and fixation at different anatomic regions. We report on our first 19 clinical tibial plateau fractures scanned intra-operatively with the Iso-C 3D. Between January and November 2003, 19 intraarticular tibia plateau fractures were scanned intraoperatively with the Iso-C3D (Siemens, Germany). No formal selection criteria were utilised except for the presence of a tibial plateau fracture. Operative procedures included 14 cases of open reduction internal fixation and 5 cases of internal fixation with arthroscopic assisted reduction. Imaging Technique: All patients were positioned on full-carbon tables for the operative procedure. After initial operative reduction and fixation, conventional two-dimensional fluoroscopic imaging was performed using standard AP and lateral projections. These images were evaluated by the operating surgeon; if the reduction and fixation was judged to be appropriate, Iso-C3D imaging was initiated. In 21% (n=4) of all cases an immediate revision of the operative procedure was performed after Iso-C3D imaging. These revisions were not deemed necessary with conventional fluoroscopy alone. In two cases, significant intra-articular incongruencies (greater than two millimetres) were noted. Additionally, in two cases, implant mal-position was detected. All patients had a postoperative CT scan. All CT scans confirmed the intraoperative Iso-C imaging, no further additional articular incongruencies or malpositioned implants were identified. When compared to conventional C-arm images, the Iso-C 3D scans demonstrated improved ability to identify the articular malreduction and implant mal-position in all cases. We have demonstrated that the Iso-C3D provides reliable intraoperative evaluation of reduction and hardware placement compared to traditional CT scans for tibial plateau fractures. In addition, clinically relevant intra-operative information was gained with its use in this study. In four (21%) cases, the operative treatment was modified due to the use of the multiplanar imaging modality. On average, 10 minutes of additional operative time was required for the use of Iso-C3D scanning and the evaluation of the images. Further prospective clinical studies are needed to improve our findings

Aims

It is imperative to understand the risks of operating on urgent cases during the COVID-19 (SARS-Cov-2 virus) pandemic for clinical decision-making and medical resource planning. The primary aim was to determine the mortality risk and associated variables when operating on urgent cases during the COVID-19 pandemic. The secondary objective was to assess differences in the outcome of patients treated between sites treating COVID-19 and a separate surgical site.

The August 2013 Trauma Roundup³⁶⁰ looks at: reverse oblique fractures do better with a cephalomedullary device; locking screws confer no advantage in tibial plateau fractures; it’s all about the radius of curvature; radius of curvature revisited; radial head replacement in complex elbow reconstruction; stem cells in early fracture haematoma; heterotrophic ossification in forearms; and Boston in perspective.