Objectives. The objective of this study was to perform a meta-analysis of all randomised controlled trials (RCTs) comparing surgical and non-surgical management of fractures of the proximal humerus, and to determine whether further analyses based on complexity of fracture, or the type of surgical intervention, produced disparate findings on patient outcomes. Methods. A systematic review of the literature was performed identifying all RCTs that compared surgical and non-surgical management of fractures of the proximal humerus. Meta-analysis of clinical outcomes was performed where possible. Subgroup analysis based on the type of fracture, and a sensitivity analysis based on the type of surgical intervention, were also performed. Results. Seven studies including 528 patients were included. The overall meta-analysis found that there was no difference in clinical outcomes. However, subgroup and sensitivity analyses found improved patient outcomes for more complex fractures managed surgically. Four-part fractures that underwent surgery had improved long-term health utility scores (mean difference, MD 95% CI 0.04 to 0.28; p = 0.007). They were also less likely to result in osteoarthritis, osteonecrosis and non/malunion (OR 7.38, 95% CI 1.97 to 27.60; p = 0.003). Another significant subgroup finding was that secondary surgery was more common for patients that underwent internal fixation compared with conservative management within the studies with predominantly three-part fractures (OR 0.15, 95% CI 0.04 to 0.63; p = 0.009). Conclusion. This meta-analysis has demonstrated that differences in the type of fracture and surgical treatment result in outcomes that are distinct from those generated from analysis of all types of fracture and surgical treatments grouped together. This has important implications for clinical decision making and should highlight the need for future trials to adopt more specific inclusion criteria. Cite this article: S. Sabharwal, N. K. Patel, D. Griffiths, T. Athanasiou, C. M. Gupte, P. Reilly. Trials based on specific fracture configuration and surgical procedures likely to be more relevant for decision making in the management of fractures of the proximal humerus: Findings of a meta-analysisBone Joint Res 2016;5:470–480. DOI: 10.1302/2046-3758.510.2000638

Recently, a new generation of superior clavicle plates was developed featuring the variable-angle locking technology for enhanced screw positioning and optimized plate-to-bone fit design. On the other hand, mini-fragment plates used in dual plating mode have demonstrated promising clinical results. However, these two bone-implant constructs have not been investigated biomechanically in a human cadaveric model. Therefore, the aim of the current study was to compare the biomechanical competence of single superior plating using the new generation plate versus dual plating with low-profile mini-fragment plates. Sixteen paired human cadaveric clavicles were assigned pairwise to two groups for instrumentation with either a 2.7 mm Variable Angle Locking Compression Plate placed superiorly (Group 1), or with one 2.5 mm anterior plate combined with one 2.0 mm superior matrix mandible plate (Group 2). An unstable clavicle shaft fracture AO/OTA15.2C was simulated by means of a 5 mm osteotomy gap. All specimens were cyclically tested to failure under craniocaudal cantilever bending, superimposed with bidirectional torsion around the shaft axis and monitored via motion tracking. Initial stiffness was significantly higher in Group 2 (9.28±4.40 N/mm) compared to Group 1 (3.68±1.08 N/mm), p=0.003. The amplitudes of interfragmentary motions in terms of craniocaudal and shear displacement, fracture gap opening and torsion were significantly bigger over the course of 12500 cycles in Group 1 compared to Group 2; p≤0.038. Cycles to 2 mm shear displacement were significantly lower in Group 1 (22792±4346) compared to Group 2 (27437±1877), p=0.047. From a biomechanical perspective, low-profile 2.5/2.0 dual plates demonstrated significantly higher initial stiffness, less interfragmentary movements, and higher resistance to failure compared to 2.7 single superior variable-angle locking plates and can therefore be considered as a useful alternative for diaphyseal clavicle fracture fixation especially in unstable fracture configurations

Appropriate surgical management of hip fractures has major clinical and economic consequences. Recently IMN use has increased compared to SHS constructs, despite no clear evidence demonstrating superiority of outcome. We therefore set out to provide further evidence about the clinical and economic implications of implant choice when considering hip fracture fixation strategies. A retrospective cohort study using Scottish hip fracture audit (SHFA) data was performed for the period 2016–2022. Patients ≥50 with a hip fracture and treated with IMN or SHS constructs at Scottish Hospitals were included. Comparative analyses, including adjustment for confounders, were performed utilising Multivariable logistic regression for dichotomous outcomes and Mann-Whitney-U tests for non-parametric data. A sub-group analysis was also performed focusing on AO-A1/A2 configurations which utilised additional regional data. Cost differences in Length of Stay (LOS) were calculated using defined costs from the NHS Scotland Costs book. In all analyses p<0.05 denoted significance. 13638 records were included (72% female). 9867 received a SHS (72%). No significant differences were identified in 30 or 60-day survival (Odds Ratio [OR] 1.05, 95%CI 0.90–1.23; p=0.532), (OR 1.10, 95%CI 0.97–1.24; p=0.138) between SHS and IMN's. There was however a significantly lower early mobilisation rate with IMN vs SHS (OR 0.64, 95%CI 0.59–0.70; p<0.001), and lower likelihood of discharge to domicile by day-30 post-admission (OR 0.77, 95%CI 0.71–0.84; p<0.001). Acute and overall, LOS were significantly lower for SHS vs IMN (11 vs 12 days and 20 vs 24 days respectively; p<0.001). Findings were similar across a sub-group analysis of 559 AO A1/A2 fracture configurations. Differences in LOS potentially increases costs by £1230 per-patient, irrespective of the higher costs of IMN's v SHS. Appropriate SHS use is associated with early mobilisation, reduced LOS and likely with reduced cost of treatment. Further research exploring potential reasons for the identified differences in early mobilisation are warranted

There are a number of periprosthetic femoral fracture (PFF) fixation failures. In several cases the effect of fracture configuration on the performance of the chosen fixation method has been underestimated. As a result, fracture movement within the window that seems to promote callus formation has not been achieved and fixations ultimately failed. This study tested the hypothesis that: PFF configuration and the choice of plate fixation method can be detrimental to healing. A series of computational models were developed, corroborated against measurements from a series of instrumented laboratory models and in vivo case studies. The models were used to investigate the fixation of different fracture configurations and plate fixation parameters. Surface strain and fracture movement were compared between the constructs. A strong correlation between the computational and experimental models was found. Computational models showed that unstable fracture configurations increase the stress on the plate fixation. It was found that bridging length plays a pivotal role in the fracture movement. Rigid fixations, where there is clinical evidence of failure, showed low fracture movement in the models (<0.05mm); this could be increased with different screw and plate configurations to promote healing. In summary our results highlighted the role of fracture configuration in PFF fixations and showed that rigid fixations that suppress fracture movement could be detrimental to healing

Background: A radiological audit of the local use of the Dynamic Hip Screw in extracapsular proximal femur fractures. Study aim: to identify cases of mechanical failure and revision, to determine predictors of fixation failure. Methods: A retrospective radiological review of 567 consecutive cases at Western Australian tertiary hospitals over a 3 year period (2002 – 2004) using the Picture Archive Computer System (PACS). Results: Female: male ratio was 2.79: 1. Evan’s classification: 418 fractures stable (73.7%), 149 unstable (26.3%). Failure of fixation occurred in 14 cases (2.5%); ten due to hip screw cut out (1.8%) and four due to plate pull off (0.8%). All cases of cut out had a significantly higher mean tip apex distance (TAD) (31 vs 20mm, P < 0.001) and an unstable fracture configuration; 8 of 10 had a poor reduction. Bivariate logistical regression revealed TAD of 25mm or more to be most predictive of cut out; followed by mean TAD, superior anterior and inferior posterior screw placement, unstable fracture configuration and poor reduction. Unassociated factors included gender, age, American Society of Anesthesiologists’ score, plate angle and length, operation time and surgeon level. A three-variable model found TAD of 25mm or more and unstable fracture configuration to be predictive, but not poor reduction. Cases with a TAD of 25mm or more with unstable fracture configuration and a poor reduction had a 21.6% chance of cut out (8 of 29). Conclusions: This is the first multifactorial multivariate analysis of a single implant sliding hip screw series. Compared with the literature, the rate of failure is low. Possible reasons include appropriate choice of implant for fracture type, improved performance with use of a single model of implant, and low exclusion rates due to the use of PACS

Background. There remains a paucity of clinical studies on the effects of coronavirus on perioperative outcomes, with no existing trials reporting on risk factors associated with increased risk of postoperative mortality in these patients. The objectives of this study were to assess perioperative complications and identify risk factors for increased mortality in patients with coronavirus undergoing surgery. Methods. This multicentre cohort study included 340 coronavirus negative patients versus 82 coronavirus positive patients undergoing surgical treatment for neck of femur fractures across nine NHS hospitals within Greater London, United Kingdom. Predefined study outcomes relating to patient demographics, fracture configuration, operative treatment, perioperative complications and mortality were recorded by observers using a standardised data collection proforma. Univariate and multivariate analysis were used to identify risk factors associated with increased risk of mortality. Findings. Coronavirus positive patients had increased risk of postoperative complications (89.0% vs 35.0%, p<0.001), higher rates of admission to high dependency and intensive care units (61.0% vs 18.2%, p<0.001), and increased length of hospital stay (13.8 ± 4.6 days vs 6.7 ± 2.5 days, p<0.001) compared to coronavirus negative patients. Postoperative complications in coronavirus positive patients included respiratory infections (13.4%), thromboembolic disease (13.4%), acute kidney injury (12.2%), and multi-organ dysfunction (12.2%). Coronavirus positive patients had increased risk of postoperative mortality (30.5% vs 10.3%, p<0.001) compared to coronavirus negative patients, with positive smoking status (Hazard ratio: 15.4 (95% CI: 4.55–52.2, p<0.001) and greater than three comorbidities (Hazard ratio: 13.5 (95% CI: 2.82–66.0, p<0.001) associated with increased risk of mortality. Interpretation. Surgery in coronavirus positive patients was associated with increased length of hospital stay, more admissions to the critical care unit, higher risk of perioperative complications and increased mortality compared to coronavirus negative patients. Multivariate analysis revealed that smoking and multiple pre-existing comorbidities were associated with increased risk of postoperative mortality

Radiation exposure is a hazard to orthopaedic surgeons, theatre staff and patients intra-operatively. Obesity is becoming a more prevalent problem worldwide and there is little evidence how a patient's body habitus correlates with the radiation doses required to penetrate the soft tissues for adequate imaging. We aimed to identify if there was a correlation between Body Mass Index (BMI) and radiation exposure intra-operatively. We performed a retrospective review of 75 patients who underwent sliding hip screw fixation for femoral neck fractures in one year. We recorded Body Mass Index (BMI), screening time, dose area product (DAP), American Society of Anesthesiologists (ASA) grade, seniority of surgeon and complexity of the fracture configuration. We analysed the data using statistical tests. We found that there was a statistically significant correlation between dose area product and patient's BMI. There was no statistically significant relationship between screening time and BMI. There was no statistical difference between ASA grade, seniority of surgeon, or complexity of fracture configuration and dose area product. Obese patients are exposed to increased doses of radiation regardless of length of screening time. Surgeons and theatre staff should be aware of the increased radiation exposure during fixation of fractures in obese patients and, along with radiographers, ensure steps are taken to minimise these risks

The aim of this study was to establish any association between implant cut-out and a Tip Apex Distance (TAD), ≥25mm, in proximal femoral fractures, following closed reduction and stabilisation, with either a Dynamic Hip Screw (DHS) or Intramedullary Hip Screw (IMHS) device. Furthermore, we investigated whether any difference in cut-out rate was related to fracture configuration or implant type. WE conducted a retrospective review of the full clinical records and radiographs of 65 consecutive patients, who underwent either DHS or IMHS fixation of proximal femoral fractures. The TAD was measured in the standard fashion using the combined measured AP and lateral radiograph distances. Fractures were classified according to the Muller AO classification. 35 patients underwent DHS fixation and 30 patients had IMHS fixation. 5 in each group had a TAD≥25mm. There were no cut-outs in the DHS group and 3 in the IMHS group. 2 of the cut-outs had a TAD≥25mm. The 3 cut-outs in the IMHS group had a fracture classification of 31-A2, 31-A3 and 32-A3.1 respectively. In addition, the fractures were inadequately reduced and fixed into a varus position. A TAD<25mm would appear to be associated with a lower rate of cut-out. The cut-out rate in the IMHS group was higher than the DHS group. Contributing factors may have included an unstable fracture configuration and inadequate closed fracture reduction at the time of surgery

Background. This is an epidemiological study of patients with middle third clavicle fractures presenting to a tertiary hospital. The data is used to formulate a classification system for middle third clavicle fractures based on fracture configuration and displacement. Description of methods. Patients presenting primarily to a referral hospital with middle third clavicle fractures were identified using the PACS radiology system. The radiographs were reviewed to determine the fracture type, displacement, shortening and amount of comminution. The clinical notes of each patient were reviewed to determine the mechanism of injury, soft tissue status, neurovascular status and treatment rendered. A novel classification system was developed to describe the different fracture configurations seen in the group. The interobserver and intraobserver correlation of the classification system as well as the ability of the classification system to predict treatment were tested. Summary of results. Three hundred and three patients were included in the review, 223 males and 80 females. Middle third clavicle fractures were displaced in 69% of cases. Displaced fractures tend to have a significant amount of displacement and shortening in most cases with averages of 19.64mm (Std Dev. 6.901) and 19.15mm (Std Dev. 9.616) respectively. Acceptable interobserver and intraobserver correlation levels were shown for the proposed classification system. Conclusion. The epidemiology of middle third clavicle fractures found in the population studied differs substantially from first world populations. It underlines the high level of road traffic accidents and interpersonal violence seen in South Africa. Surgeons treating clavicle fractures are still divided on the indications for surgery with little correlation found between the fracture type and displacement on radiographs and the type of treatment rendered. The classification system provides guidelines to treating surgeons to the correct treatment modality. MULTIPLE DISCLOSURES

In Displaced Intracapsular Hip Fractures (ICHF) in young active patients, preservation of the femoral head and its blood supply are of high importance and urgent surgical treatment with anatomic reduction and internal fixation is the preferred intervention. Due to the strong varus displacement shear forces exerted across the hip, there are relatively high complication rates after fixation. There is no consensus regarding the optimal fixation device or technique. This retrospective study compared closed reduction internal fixation method using cannulated cancellous screw (CCS) with the Targon Femoral Neck (TFN) hip fixed angle screw. Data regarding, gender, operational data, duration of surgery, complications, NAS (Numerical Analogue Scale) pain score, Modified Harris Hip Score (MHHS) and SF-12 scores were retrieved for patients younger than 65 with displaced ICHF. Eighty-two patients were included in the study, 30 patients treated with CCS were compared to 52 patients treated with TFN. Fracture configuration (Garden and Pauwel classifications), mean time to surgery and complication rate did not differ significantly. Operative time did differ significantly between groups (CCS 56 minutes, TFN 92 minutes, p<0.001). At final follow-up the CCS group reported less pain (NAS 2.3 vs 3.5, p< 0.049) and better Mental Health Composite score of SF-12 (p=0.017) compared to the TFN group. Complication rates for the treatment of displaced ICHF with TFN and CCS showed no significant differences; however, the functional outcomes, as presented by the NAS and Mental Health Composite score of SF-12, showed superiority for CCS treatment. As this fixation method is related to reduce costs, we suggest CCS for the treatment of displaced ICHF in the young population

Aims

The purpose of this study was to compare reoperation and revision rates of double plating (DP), single plating using a lateral locking plate (SP), or distal femoral arthroplasty (DFA) for the treatment of periprosthetic distal femur fractures (PDFFs).

Introduction. Hoffa fractures are rare, intra-articular fractures of the femoral condyle in the coronal plane and involving the weight-bearing surface of the distal femur. Surgical fixation is warranted to achieve stability, early mobilisation and satisfactory knee function. We describe a unique type of Hoffa fracture in the coronal plane with sagittal split and intra-articular comminution. There is scant evidence in current literature with regards to surgical approaches, techniques and implants. We report of our case with a review of the literature. Case report. A 40 year old male motorcyclist was involved in a high speed road traffic collision. X-rays confirmed displaced unicondylar fracture of the lateral femoral condyle. CT showed sagittal split of the Hoffa fragment and intra-articular comminution. MRI showed partial rupture of the anterior cruciate ligament. The patient underwent definitive surgical treatment via a midline skin incision and lateral parapatellar approach using cannulated screws, headless compression screws and anti-glide plate. Weightbearing was commenced at 8 weeks. Arthroscopy and adhesiolysis was performed at 12 weeks to improve range of motion. The patient was discharged at one year with a pain-free, functional knee. Discussion. Hoffa fractures are high-energy fractures, often seen in young male motorcyclists with flexed and slightly abducted knee. Most papers recommend surgical fixation, however there is no widely accepted surgical method or rehabilitation regime. Varying surgical approaches, screw direction, choice of implants, and post-operative care have been described. Surgical approach depends on the configuration of the fracture. The medial/lateral parapatellar approach is commonly used as it does not compromise future arthroplasty, but it does not allow access to fix posterior comminution. Arthroscopic-assistance may be used with good outcomes and less tissue dissection. AP screws are widely reported in the literature, most likely due to easier access to the fracture site. PA screws may provide better stability, but access is more difficult. Fixation often involves passing screws through the articular surface, therefore the area damaged should be kept to a minimum by using the smallest possible screw; headless compression screws leave a smaller footprint in the articular cartilage. Locking plate augmentation generally gives good outcomes. Conclusion. Hoffa fractures are rare and difficult to treat. Surgical treatment is the best choice for optimum post-operative knee function. There is no consensus on choice of surgical approaches, techniques and implants, as these are dependent on fracture configuration. In this particular case we emphasise the importance of using an anti-glide plate to address the sagittal component. Despite the need for a secondary procedure, the treatment has had positive outcomes and may be used as a guide for treatment of future Hoffa fractures of a similar sub-type

Aims

Femoral periprosthetic fractures are rising in incidence. Their management is complex and carries a high associated mortality. Unlike native hip fractures, there are no guidelines advising on time to theatre in this group. We aim to determine whether delaying surgical intervention influences morbidity or mortality in femoral periprosthetic fractures.

Background:. Developing a successful outpatient service for Ilizarov frame removal provides both patient and cost benefits. Misinformation and patient trepidation can be detrimental to recovery and influence choices. Education may play an important role in tailoring an efficacious service. Objective:. Review Belfast Regional Limb Reconstruction frame removal practice, introduce changes aimed at improving care and evaluate effects. Methods:. 1 year retrospective review of Ilizarov frame removal. Evaluation of service prior to and following provision of a new patient information leaflet, alongside a test wire removal technique. Subsequent service evaluation supplemented via patient reported feedback questionnaire. Results:. Retrospectively 85% Ilizarov frames removed in clinic, 54% required Entonox. Annual cost £19000. 46% patients unaware of process, gathering information from unprofessional sources. General anaesthetic and analgesic requirements related to psychosocial influences; no correlation between fracture configuration, elective reconstructive cases and operative techniques. Prospectively 96% patients found information leaflet educational and beneficial. 87% Ilizarov frames removed in clinic. 100% patients who had outpatient removal recommend this method. Entonox use reduced to 15% with average pain score 4.6/10 without analgesia. Patients felt happier. Projected annual cost savings £3000. 100% rated service excellent. Discussion:. Professional education and a standardised outpatient removal process for Ilizarov frames, delivered by a dedicated specialist team, reduces morbidity and positively impacts service provision

Whilst the use of reverse total shoulder arthroplasty is becoming more common for the treatment of rotator cuff arthropathy, there is still relatively little evidence with regards to its use in complex fractures of the proximal humerus in the elderly. It is increasingly felt to be of use in those patients in whom either internal fixation is not possible due to fracture configuration or bone quality, or in whom there is a rotator cuff deficiency. We report the outcomes of 14 patients with complex 3- or 4-part humeral fractures or delayed presentation of dislocation treated with reverse TSR. Patients were treated within a two year period from January 2011 to December 2013. The average age at time of operation was 75 (50–91 years) with a mean follow-up of 7 months (2–13 months). One patient moved out of area and one lost to follow-up two months following procedure. Reverse TSR was considered a salvage procedure for patients with comminuted proximal humeral fractures or those who presented with irreducible non-acute dislocations. At time of last follow-up all 14 patients were satisfied with the results of their operation and functionally independent with activities of daily living. Range of movement post-operatively was good with mean active forward extension 97° (70–150°) and abduction 101° (80–170°). 43% of patients were pain-free, whilst the remainder only required the use of occasional analgesia. No major post-operative complications were reported. Patients who underwent reverse TSR for dislocation fared better than for those with proximal humeral fractures. The mean active forward extension was 107.5° (90–150°) and abduction 112.5° (90–170°) in the dislocation group (n=5) compared with those who had a fracture in which the forward extension was 91.4° (70–120°) and abduction 95° (80–120°). The results of these patients demonstrate that reverse TSR should be considered in patients with complex proximal humeral fractures or delayed presentation of fractures. It seems to provide consistently excellent pain-relief for patients, with patients either reporting being pain-free or requiring only occasional analgesia. In addition, all patients treated were functionally independent following operation. Range of movement, particularly for those with dislocation, appear good. Further follow-up is required to ensure sustained results but early studies are encouraging

Introduction. The use of reverse total shoulder arthroplasty (RSA) is becoming increasingly common in the treatment of rotator cuff arthropathy. In recent years indications for use have expanded to include elderly patients in whom either internal fixation is not possible due to fracture configuration, poor bone quality, or presence of a rotator cuff deficiency. There is however relatively little evidence to support its use in these circumstances. Objective. This study aims to assess the viability of RSA as a salvage procedure in the treatment of complex proximal humeral fractures or irreducible dislocations, quantified in terms of functional outcome, complication rates and patient reported satisfaction. Methods. All patients presenting between January 2011 and December 2013 with a complex 3- or 4-part humeral fracture or a delayed presentation with an irreducible non-acute dislocation, treated with salvage RSA were eligible for inclusion. All operations were performed in a single centre by one of two specialist upper limb surgeons. Standard deltopectoral approach was performed. Tournier reverse fracture stem with two choices of inserts and graft hole in the stem with proximal hydroxyapatite coating was the implant of choice. All patients and underwent a standardised rehabilitation programme. Clinical outcome was measured at final follow up using (1) patient reported satisfaction, (2) clinician measured range of movement (3) complication rate. Results. A total of 16 patients were eligible for inclusion in this study. Mean age at time of operation was 72.8 years (41–91 years) with a mean follow-up of 7 months (2–13 months). At time of last follow-up 100 per cent of patients were satisfied with the results of their operation and functionally independent with activities of daily living. Mean oxford score was 39 (36–48). Range of movement post-operatively had a mean active forward extension 97° (70–150°) and abduction 101° (80–170°). 43% of patients were pain-free, whilst the remainder only required the use of occasional analgesia. One patient developed heterotrophic ossification post operatively and underwent surgical excision. One patient sustained a peri-prosthetic avulsion fracture at 18months treated non-operatively. Patients who underwent RSA for dislocation fared better than for those with proximal humeral fractures. The mean active forward extension was 107.5° (90–150°) and abduction 112.5° (90–170°) in the dislocation group (N=5) compared with those who had a fracture (N= 11) in which the forward extension was 91.4° (70–120°) and abduction 95° (80–120°). Conclusion. Reverse TSA should be considered in patients with complex proximal humeral fractures or delayed presentation with irreducible dislocation. Early results demonstrate good outcomes in terms of patient satisfaction, pain relief and preservation of function. These early result are encouraging however a further study with longer follow-up is required to confirm sustained benefit

Open fractures of the long bones of the limbs are associated with an increased risk of osteomyelitis and few studies investigate this complication in circular frames. We reviewed the incidence of and contributory factors toward infection-related outcomes in Grade 3 open fractures, managed with a circular frame, at a single centre. We performed a retrospective study of consecutive adult patients presenting with a Grade 3 open fracture, who required a circular frame for definitive skeletal fixation from 2005 to 2014. Patient case notes, microbiology results and radiological studies were reviewed for demographic details and surgical management. Infection-related outcomes were classified as ‘possible’ and ‘definitive’, based on clinical findings, microbiology and imaging features at follow-up at 6 and 12 months. 74 patients were identified with an average age of 43 years. There were 70 unilateral and 4 bilateral limb injuries. Most treated limbs had a tibial fracture (97%). There were 24 Gustillo-Anderson grade 3A, 37 grade 3B, 4 grade 3C and 9 not sub-classified. 33% of patients were debrided on the day of injury. Average time to circular frame installation was 14 days. 27 Ilizarov, 44 Taylor spatial and 3 other circular frames were used. A variety of plastic surgery reconstruction was used to provide wound coverage: skin grafts, local and free flaps. Circular frames were in place for 259 days on average. 10 patients (1 bilateral limb fracture) still have their frames in-situ. Additional bone grafting to the fracture site was carried out in 13 patients and 15 limbs (1 patient had 2 episodes of bone grafting to the same limb). 8 limbs in 8 patients were excluded from infection-related outcome analysis: 4 patients lost to follow-up, 2 patients who went on to below knee amputation and 2 patients had <6 months’ follow-up. 13 patients (14 limbs) had only 6 months’ follow-up and 53 patients (56 limbs) had 12 months’ follow-up. There were 5 patients (5 limbs) with ‘possible’ infection (7%): 1 screw infection and 4 soft tissue infections. 1 patient (1 limb) had a tissue-confirmed ‘definitive’ infected non-union (1.4%). Patients managed with circular frames typically have complex fracture configurations less amenable to other methods of definitive fixation. Our patient cohort has a limb salvage rate (97%) and a soft tissue infection rate (‘possible’ infection) comparable to other reported series. We report a low rate of osteomyelitis (‘definitive’ infection) in consecutive patients managed using our protocol

We would like to present this case series of 10 adolescent patients with displaced, closed diaphyseal tibial fractures managed using the Taylor Spatial Frame. Management options for these injuries include non-operative treatment, antegrade nailing, flexible nailing systems, plating and external circular fixation. External circular fixation allows anatomical reduction avoiding potential complications such as growth arrest associated with antegrade nailing and retained metal work with plating. Flexible nailing system and cast immobilisation are unreliable for precise anatomical reduction. With limited evidence as to the extent of post-traumatic deformity that is acceptable, combined with the limited remodeling potential that this patient group possess, the precision of percutaneous fixation with the Taylor Spatial Frame system has clear advantages. This is a retrospective analysis of 10 adolescent patients with a mean age of 14.5 years (range 13 to 16 years). Data collected includes fracture configuration, deformity both pre and post operatively compared to post frame removal, length of time in frame and complications. The data was gathered using the patient case notes and the Picture Archiving and Communications System. The mean time in frame was 15.5 weeks (range 11 to 22 weeks). One non-union in a cigarette smoker was successfully managed with a second Taylor Spatial Frame episode. Our conclusion was that with careful patient selection the Taylor Spatial Frame allows successful treatment of closed tibial fractures in adolescents, avoiding complications such as growth arrest and post-traumatic deformity as well as avoiding retained metalwork

Aims

In UK there are around 76,000 hip fractures occur each year 10% to 15% of which are undisplaced intracapsular. There is considerable debate whether internal fixation is the most appropriate treatment for undisplaced fractures in older patients. This study describes cannulated hip screws survivorship analysis for patients aged ≥ 60 years with undisplaced intra-capsular fractures.

Due to its popularity of intramedullary nails (IMN) high success rate, newer design (titanium) IMN system have been introduced to replace stainless steel system. However the stability provided by the titanium IMN. may not be adequate, there by influencing the union rate. We aimed to compare the results of both IMN systems via prospective clinical study and biomechanical testing using RSA. Biomechanical study. This study was done in an experimental set-up which consisted of a physically simulated femoral shaft fractures models fixed with a stainless steel (Russell Taylor) or Titanium (Trigen) IM nailing system. Two common fracture configurations with stimulated weight bearing conditions were used and the axis of fragment movements recorded. Clinical study. The data on two groups of patients were collected as part of a prospective cohort study. Details of the implant, such as size of nail, cross screw lengths, screw thickness, etc. was collected. Patients were followed up for a minimum of 4 months and details of clinical complications recorded. Biomechanical study. The degree of translation movement in comminuted fracture, using titanium IMN system, was 6 times more compared to stainless steel IMN system. Clinical study. The results show that there is a 5.7% of non union and 14% hardware problems with titanium based IMN system when compared to 2.2% non union in the stainless steel IMN system. Titanium based IM nailing system have a potential to inherent mechanical instability when used to treat comminuted fractures. This may explain some of the clinically observed delayed or non-union of femoral fractures