Total hip arthroplasty (THA) is a commonly performed surgical procedure for the treatment of hip arthritis. Approximately 50,000 THAs are performed annually in Canada. The costs incurred to the healthcare system are tremendous, amounting to anywhere between 4.3 and 7.3 billion dollars each year. Despite the substantial financial burden of THA to the Canadian healthcare system, few studies have provided accurate cost estimations of this procedure. To determine the impact of surgical approach on costs of THA from a hospital perspective, and provide an updated cost estimation of THA within a publically funded healthcare system.Introduction
Purpose
Total knee arthroplasty (TKA) has proven clinical success with reported longterm survivorship of 92% in the elderly population. Concerns regarding increased loosening rates and potential need for multiple revision surgeries in patients younger than 60 years have traditionally discouraged TKA in younger patients. The purpose of this study was to review the longterm clinical and radiographic results of patients under the age of 45 yrs who underwent a total knee replacement. A retrospective review of our institutional database was performed between January 1996 and December 2004 The criteria for inclusion in the study were as follows: age 45 years or younger at index arthroplasty, cemented condylar prosthesis, and a minimum follow-up of 9 years. A total of 39 consecutive primary cemented condylar knee arthroplasties in patients with end stage arthritis were performed in 36 patients who were 45 years or younger. The median length of followup was 13.6 years. There were 18 men and 21 women. The mean age was 40.6 years (range, 28–44). There were 23 right, 16 left, and 3 bilateral procedures. The mean body mass index was 31.2 kg/m2 Clinical and radiological evaluations were performed before surgery and at 6 weeks, 3 months, 1 year and every 2 years subsequently. Knee scores were calculated using the Knee Society Clinical Rating Scores (KSCRS), SF-12 and WOMAC scores to assess pre, and post-operative function. Postoperative anteroposterior and lateral views were assessed for femoral and tibial component position, alignment, and presence or progression of radiolucent lines at the bone-cement and prosthesis-cement interfaces Statistical analysis was performed using the 2-sample test or Wilcoxon rank sum test for comparison of continuous variables. Kaplan-Meier analysis of implant survival was performed with failure defined as femoral component revision due to any cause.Introduction
Materials and Methods
The effect of polyethylene wear and lift-off between the tibial and femoral components on the mechanical axis was assessed in primary TKA (Total Knee Arthroplasty) based on retrieval data and full leg radiographs. Controversy exist regarding performing a TKA with component placement in physiologic versus neutral alignment. Some literature indicates good survivorship and superior clinical outcome in undercorrected TKA's for varus osteoarthritic knees. However, other literature indicates decreased survivorship and coronal plane alignment is still one of the contributing factors to wear in total knee arthroplasty (TKA). The two determinants of the intra-articular deformity in TKA arepolyethylene wear and lift-off between the tibial and femoral compartment. The goal of this study was to evaluate the impact of wear and lift-off on the mechanical axis in neutral and varus aligned TKA's.Summary
Introduction
Increased modularity of total hip arthroplasty components has occurred, with theoretical advantages and disadvantages. Recent literature indicates the potential for elevated revision rates of modular neck systems and the potential for metallosis and ALVAL (Aseptic Lymphocyte dominated Vasculitis Associated Lesion) formation at the modular neck/stem site. Retrieval analysis of one modular neck implant design including SEM (Scanning Electron Microscopy) assessment was done and correlated to FEA (Finite Element Analysis) as well as clinical features of patient demographics, implant and laboratory analysis. Correlation of the consistent corrosion locations to FEA indicates that the material and design features of this system may result in a biomechanical reason for failure. The stem aspect of the modular neck/stem junction may be at particular risk.
Fast track arthroplasty regimens require preservation of motor power to perform early rehabilitation and ensure early discharge (1). Commonly performed nerve blocks like femoral and Sciatic nerve blocks results in motor weakness thereby interfering with early rehabilitation and may also predispose to patient falls (2, 3). Hence, targeting the terminal branches of the femoral and sciatic nerves around the knee joint under ultrasound is an attractive strategy. The nerve supply of interest for knee analgesia are the terminal branches of the femoral nerve, the genicular branches of the lateral cutaneous nerve of thigh, obturator and sciatic nerves (4). We modified the performance of the adductor canal block and combined it with US guided posterior pericapsular injection and lateral femoral cutaneous nerve block to provide analgesia around the knee joint. The femoral artery is first traced under the sartorius muscle until the origin of descending geniculate artery and the block is performed proximal to its origin. A needle is inserted in-plane between the Sartorius and rectus femoris above the fascia lata and 5 ml of 0.5% ropivacaine (LA) is injected to block the intermediate cutaneous nerve of thigh. The needle is then redirected to enter the fascia of Sartorius to deliver an additional 5ml of LA to cover the medial cutaneous nerve of thigh following which it is further advanced till the needle tip is seen to lie adjacent to the femoral artery under the Sartorius to perform the adductor canal block with an additional 15–20 ml of LA to cover nerve to vastus medialis, saphenous nerve and posterior division of the obturator nerve (Fig 1). The lateral cutaneous nerve of thigh is optionally blocked with 10 ml of LA near the anterior superior iliac spine between the origin of Sartorius and tensor fascia lata (Fig 2). The terminal branches of sciatic nerve to the knee joint is blocked by depositing 25 ml of local anesthetic solution between the popliteal artery and femur bone at the level of femoral epicondyles (Fig 3).Introduction
Methods
Coronal plane alignment is one of the contributing factors to polyethylene wear in total knee arthroplasty (TKA). The goal of this study was to evaluate the wear and damage patterns of retrieved tibial polyethylene inserts in relationship to the overall mechanical alignment and to the position of the tibial component. Based on full-length radiographs, ninety-five polyethylene inserts retrieved from primary TKA's with a minimum time in-vivo of five years were analysed for wear and damage. Four alignment groups were compared: valgus, neutral, mild varus and moderate varus. Varus and valgus positioning of the tibial component was analysed for damage score for the neutral and varus aligned groups.Introduction
Materials and methods
Beadmill processing combined with automated blood culture bottle methods (BACTEC™) has a greater sensitivity and specificity, and a shorter time to positivity compared with primary plates (PP) for prosthetic joint infection (PJI) diagnosis but the clinical impact of Bactec on antimicrobial therapy has not yet been evaluated. We compared time-to-positivity of Columbia agar with horse blood plates (BA) and chocolatized horse blood plates (CHOC) versus anaerobic (ANA) and aerobic blood culture bottles (02) in patients with PJI. We compared the contributions of the two methods to the commencement of effective and targeted antimicrobial therapy. Retrospective observational study from June 2013 to March 2014. Inclusion criteria were confirmed PJI (IDSA criteria) with at least 2 perioperative samples. After beadmill processing BA and CHOC plates were incubated for 2 days and discarded if negative, BactecTM bottles were incubated for 14 days and sub-cultured if positive. MALDI-TOF (Microflex, Brucker) was used for identification and all isolates had sensitivities performed (Phoenix, BD). Standard empirical antibiotic treatment was teicoplanin, piperacillin/tazobactam and amikacin. We defined time to switch as difference between date of sample collection and date of commencing targeted or effective therapy; prior antibiotic therapy was defined as the use of antibiotics within 14 days before samples collection. Fifty cases were identified during the study period. 330 microbiological isolates were included: 24 (7.3%) were considered contaminants; 153 isolates (50.0%) were detected both from BactecTM and PP; 152 (49.7%) from BactecTM only; 1 isolate (0.3%) from PP only. 17 (34%) diagnoses of PJI was made exclusively by BactecTM. The majority of isolates on BA and CHOC plates grew in the first 24 hours (81.2% and 77.5% respectively). 293/305 isolates from BactecTM (96.1%) grew in the first 2 days. Antibiograms were available after 2.5 days from PP versus 4 days from BACTEC (p<0.0001). When we compared time to switch from empiric to targeted therapy, no difference was seen between patients with positive BACTEC cultures only (median 4 days, range 2–15) versus patients with positive PP cultures, (median 5 days, range 2–9) (p=0.984). Where organisms were resistant to empirical therapy, PP results did not contribute to switching to effective therapy. Prior antibiotic therapy had no impact on time-to-positivity for both methods (R=−0.005, p=0.936). Compared to BACTEC cultures for the diagnosis of PJIs, primary plate cultures did not provide additional diagnostic information and did not significantly reduce the time to effective or targeted antimicrobial therapy.
The pros and cons of general anesthesia versus spinal anesthesia in total hip arthroplasty has been a long debated topic. The purpose of this study was to compare the surgical times, blood loss and transfusion requirements between anesthetic types in patients undergoing primary total hip arthroplasty. A consecutive series of 1600 THA procedures with complete preoperative and postoperative data were evaluated. Twenty eight percent of procedures were performed with a general anesthetic (GA), 67% with a spinal anesthetic (SP) and 5% with a combination of the two. Outcomes were compared and tested for significance using the Independent Samples Kruskal Wallis or Pearson Chi-Square analysis.Purpose
Method
The patella provides a mechanical advantage to the knee extensor mechanism. Patellectomy, performed for trauma or patellofemoral arthrosis, does not preclude the development of tibiofemoral arthrosis. Total knee arthroplasty is the mainstay of treatment for tibiofemoral arthrosis. The purpose of this study was to evaluate the outcomes of total knee arthoplasty in patients who previously underwent patellectomy. A retrospective analysis was completed on a prospectively collected database to identify all patients who underwent total knee arthroplasty following a previous patellectomy. Sixty-one total knee arthroplasties in 57 patients were identified. Patient demographics as well as functional outcome scores, including WOMAC and Knee Society Scores, were evaluated.Purpose
Method
