Hyaluronic acid (Hyalunan, HA), β-1,4-linked D-glucuronic acid and β-1,3 N-acetyl-D-glucosamine polysaccharide, is a nonsulfated glycosaminoglycan(GAG) conserved in the extracellular matrix (ECM). Due to its biocompatibility, biodegradable properties, HA is widely applied for tissue engineering. However, HA also has defects for tissue engineering such as mechanical properties, difficulty of handling. Thus, it is various modified by chemical reaction to produce HA derivative. HA plays an important role in tissue morphogenesis, proliferation and cell differentiation. Ascorbic acid (AA) has an effect on collagen synthesis and bone mineralization. Ascorbate levels also have a significant effect on osteoblast proliferation and alkaline phosphatase (ALP) expression. However AA is weak to heat and light, thus it is easily degradable. Consequently, we conjugated HA with AA in order to make it more stable and effective. In this study, we prepared HA-AA conjugate and evaluated activity of products in pre-osteoblast.

To produce more effective conjugation, we synthesised HA derivative, HA-N-hydroxysuccinimide, an activated ester of the glucuronic acid moiety. This HA-active ester intermediate is a precursor for drug-polymer conjugates. The degree of substitution was calculated by NMR analysis. The modified HA was dialysed and lyophilised. The yield of conjugation is calculated by Gel Permeation Chromatography (GPC). After the process, HA was conjugated with AA once again as previously mentioned. In this study, the resultant HA-AA conjugate was tested on MC3T3-E1, murine pre-osteoblast cells. We examined cellular viability (cytotoxicity), proliferation and gene expression. The expression of Type 1 collagen was examined by RT-PCR and western blot. Osteocalcin (OCN), osteopontin (OPN) and bone sialoprotein (BSP), bone proliferation and differentiation marker were detected by RT-PCR. Alkaline phosphatase assay was also performed. For confirmation on bone mineralization, alizarin red staining and von Kossa staining was performed.

In conclusion, the in vitro data demonstrate that HA-AA conjugate has an important role in bone formation, as it can increase proliferation and osteogenic differentiation of MC3T3-E1 cells. These observations further support the use of in vivo system for tissue engineering applications.

We have analyzed the long-term clinical and radiological results of 169 total knee replacements(TKRs) for rheumatoid arthritis over 10 years. The average follow up period was 12.8(10–17.6) years.

The flexion contracture was improved from average 25.0 to 2.9 degrees. But the angle of great flexion had decreased from average 128.0 to 114.7 degrees. At the final follow up, the American Knee Society knee score was 87.5 and function score 76.5 in average. The revision arthroplasty was performed in 20 cases, but only 4 cases were done before 10 years after the primary TKRs. The survival rate of the implant was 97.9% at 10 years and 85.3% at 14 years in Kaplan-Meier survivorship analysis. But just after 10 years, problems such as osteolysis and periprosthetic fractures started to occur increasingly. 10-year follow up results is just the 10-year results only, not the long-term or final results of TKRs for rheumatoid arthritis.

The purpose of this study was to evaluate the effect of decreasing tibial slope on extention gap during posterior stabilized total knee arthroplasty. 110 posterior stabilized total knee arthroplasties were studied for 2 groups;

having flexion contractures(n=35),

In each group, we measured the decrease of tibial slope and frequency of additional distal femoral resecions that were done due to insufficient extension gap in comparison with flexion gap during posterior stabilized total knee arthroplasty. We also compared frequencies of additional distal femoral resections between 2 parts having more and less slope decrease in each groups.

In each group, tibial slope decrease were 8.7 degrees, 7.4 degrees(p=0.145) and frequencies of additional resection were 51.4%, 24%(p=0.005) in average. In 2 parts having more and less slope decrease in each group, frequencies of additional resection were 44.4% vs 58.8%(p=0.505), 13.2% vs 35.1%(p=0.032). Results suggested that more decrease of tibial slope reduced frequency of additional distal femoral resection during posterior stabilized total knee arthroplasty in group having no flexion contracture.

Decreasing tibial slope can be considered as a factor influencing on extension gap during posterior stabilized total knee arthroplasty. The estimation of predictable tibia slope decrease through preoperative radiologic findings can be beneficial in performing succeful posterior stabilized total knee arthroplasty.

Uncontained peripheral bone defect in posteromedial tibial plateau is not an infrequent problem even in primary total knee arthroplasty, especially in Korean patients some of those have large angular deformities preoperatively.

We reviewed the clinical and radiological results of primary total knee replacements of 33 osteoarthritic knees in 28 patients with the use of metal block augmentation for uncontained peripheral tibial bone defects more than 5 millimeters in depth and more than a quarter of medial tibial plateau in width. Those defects were encountered in 75 knees (9.6%) during 779 primary total knee arthroplasties performed by single surgeon between January 2002 and December 2004 at our institution. Modular metal block augmentation was reserved for 42 knees, while the other knees were managed with bone-grafting or cement-filling techniques. Clinical and radiological follow-up more than 12 months were available from 33(78.6%) of 42 knees.

At a mean of 32.2 months (range:12~75 months), 31 knees (93.9%) except two cases of failure were evaluated as good or excellent. The average pre-operative American Knee Society Knee and Function scores were 32.5 and 38.6 respectively, which increased to 82.9 and 79.8 respectively at the latest follow-up. There were no radiolucent lines (RLLs) beneath the metallic block or tibial tray, which were progressive or more than 2 millimeters on radiographs, in those knees. Revisions were required for one delayed infection and another aseptic loosening of tibial component.

Non-progressive RLLs less than 2 millimeters at the cement-bone interface beneath the metallic block were noted in 10 (32.3%) of 31 knees. The RLLs appeared in 5 (41.7%) of 12 knees with metallic block augmentation alone and 5 (26.3%) of 19 knees which had been treated with the use of additional intramedullary stem augmentation, although this difference was not statistically significant. Since these radiolucent lines were not progressive or symptomatic at all, their clinical meanings or long-term consequences are not determined yet. All knees managed with the additional intramedullary stem augmentation revealed to have radiopaque lines adjacent to the stem on follow-up radiographs. The sclerotic halo around the tip of stem could be interpreted as evidence of the stem’s function in load sharing and might reflect secure fixation of tibial tray to bony interface.

We concluded that the use of modular metal block augmentation devices for peripheral tibial defects measuring more than 5 millimeters could provide a simple, rapid and dependable technique that provides predictable results. The observation that all knees managed with additional intramedullary stem augmentation would have sclerotic halo adjacent to the stem on follow-up radiographs may reflect an intramedullary stem is an important adjunct to bone defect management.

To know how to succeed and survive for his or her whole life after the primary TKA by studying the causes of aseptic failure of the cruciate retaining type primary TKA. One hundred and seventy nine cases of revision of the TKA were analyzed concerning the causes of failure. The longest follow-up period was 25 years. All cases of the immediate postoperative and pre-revision weight bearing x-rays were reviewed. The operative findings of the revision surgery were compared with the pre-revision x-rays and physical findings.

The results of this study were:

The incidence of wear of the tibial polyethylene insert was predominant.

All aseptic failures occurred in high flexion knees. The causes of failures could be classified into four, the implant design, the bone cutting and the soft tissue balance and fixation. Long time survival could be achieved if those factors are perfect.

The purpose of this study was to examine surface characteristics of 30 alumina and 24 zirconia ceramic femoral heads and to identify phase transformation in zirconia heads. We also studied penetration rate of alumina and zirconia heads into UHMWPE liner. The alumina heads had been implanted for a mean of 11.3 years (8.1 to 16.2) and zirconia heads for a mean of 9.8 years (7.5 to 15).

The mean surface roughness values of explanted alumina heads (Ra 40.12 nm and Rpm 578.34 nm) were similar to those for the explanted zirconia heads (Ra 36.12 nm and Rpm 607.34 nm). The mean value of monoclinic phase of two control non-implanted zirconia heads was 1% (0.8–1.5) and 1.2% (0.9–1.3), respectively. The mean value of monoclinic phase of 24 explanted zirconia heads was 7.3% (1% to 26%).

In the alumina head group, mean linear penetration rate of UHMWPE liner was 0.10 mm/yr (0.09 to 0.12) in hips with low Ra and Rpm values (13.22 nm and 85.91 nm, respectively). The mean linear penetration rate of UHMWPE liner was 0.13 mm/yr (0.17 to 0.23) in the hips with high Ra and Rpm values (198.72 nm and 1329 nm, respectively). This differences was significant (P=0.041)

In the zirconia head group, the mean linear penetration rate of UHMWPE liner was 0.09 mm/yr (0.07 to 0.14) in hips with low Ra and Rpm values (12.78 nm and 92.99 nm, respectively). The mean linear penetration rate of UHMWPE liner was 0.12 mm/yr (0.08 to 0.22) in hips with high Ra and Rpm values (199.21 nm and 1381 nm, respectively). This difference was significant (P=0.039).

The explanted zirconia heads which had a minimal phase transformation had similar surface roughness and a similar penetration rate of UHMWPE liner as the explanted alumina head.

To investigate the amount and the factors of changes of the thickness of tibial polyethylene insert in revisional TKA compared to original thickness of primary TKA. We analyzed one hundred and twenty cases of wear, loosening and instability were included in this study. Infection cases were excluded. The period between the primary TKA and revision TKA was 88.5 months in average (range 1 to 17 year 3 months). The amount of increase of the tibial polyethylene thickness according to the main cause of failure and the wear site was analyzed.

The results of this study were: 1: The increased thickness was 6.7 mm in average. 2: The amount of increase in case of wear of anterior portion only was 2.3 mm, which was below the average. 3: The loosening cases showed 8.2 mm increase in average which was significantly greater than the average. 4: The cases of greater wear of medial side than lateral side showed 8.5 mm increase of the thickness which was significantly greater than the average. 5: The cases of only medial side wear showed 5.5 mm increase of the thickness, which was below the average. 6: The cases of the other causes such as patellar component wear, generalized wear, wear of posterior portion only, early wear less than 5 years after primary TKA because of flat polyethylene surface showed comparable amount of wear to the average.

The thickness of tibial polyethylene insert in revisional TKA compare to original thickness of primary TKA showed that it increased 6.7mm in average and was variable according to the cause of failure.

The purpose of this study is to analyze clinical and radiological results of total hip arthroplasty using the 3rd generation ceramic on ceramic articular surface.

Between July 1999 and May 2005, 339 hips of 250 patients had primary cementless total hip arthroplasty with the 3rd generation ceramic on ceramic bearing implants. And 325 hips of 236 patients were followed up over 3 years. Male were 168 patients(237 hips) and female were 68 patients(88 hips). The mean age at the time of operation was 47.3(range, 25~76) years old and the mean follow up period was 62.4(range, 36~107.6) months. The preoperative diagnoses were osteonecrosis of the femoral head (ONFH) in 250 hips, secondary osteoarthritis in 55 hips(dysplasia in 35, infection sequalae in 12, LCP in 2, CDH in 2), hemophilic arthropathy in 9 hips, ankylosing spondylitis in 7 hips etc.

We used Bicontact system(Aesculap, Germany) in 65 hips, Secur-FitTM(Stryker Howmedica Osteonics, USA) in 206 hips, Trilogy ABTM (Zimmer, USA) in 54 hips. Clinically, Harris Hip Score, thigh pain, squeaking and other complications were evaluated. Radiologically, the serial radiographs were analyzed.

Clinically, the Harris hip score was improved from preoperative 66.0(19~91) to 96.2(58~100) at the last follow-up. Radiologically, there was no loosening of implants and visible wear and osteolysis. Heterotopic ossifications were noted in 5 cases. In complications, there was dislocation in one case, periprosthetic fracture in 2 cases and thigh pain in 9 cases. Intermittent squeaking sound has occurred in 8 cases(2.5%). Among these, one case of loud squeaking which happened after fall down had revision surgery. There was no infection and fracture of ceramic implant.

Our midterm results of THA with the 3rd generation ceramic bearing system were very satisfactory and demonstrated that the 3rd generation ceramic bearings remain as an excellent bearing choice because of their superior wear characteristics. However, the results of this study suggests that the squeaking would be one of strong potential risk factors for failure of ceramic on ceramic total hip arthroplasty and we must be very cautious to prevent squeaking.

Architectural changes in occurring in the proximal femur (resorption) after total hip arthroplasty (due to stress shielding) continues to be a problem. In an attempt to reduce these bony changes the concept of short and femoral neck sparing stem designs have been advocated. The purpose of this study was to evaluate the early clinical and radiological results, especially stem fixation and bone remodeling of proximal femur after total hip arthroplasty.

A total of forty-five patients (fifty-four hips) were included in the study. There were twenty men and twenty-five women. The mean age at the time of operation was 53.9 years (range, twenty-six to seventy-five years). Clinical and radiological evaluation were performed at each follow-up. Bone densitometry was carried out on all patients one week after operation and at the final follow-up examination. The mean follow-up was 1.3 years (range, one to two years).

The mean preoperative Harris hip score was 45 points (range, 15 to 48 points), which improved to a mean of 96 points (range, 85 to 100 points) at the final follow-up. No patient complained of thigh pain at any stage. No acetabular or femoral osteolysis was observed and no hip required revision for aseptic loosening of either component. One hip (2%) required open reduction and fixation with a cable for calcar femorale fracture. Bone mineral densitometry revealed a minimal bone remodeling in the acetbulum and proximal femur.

The geometry of this ultra-short anatomic neck sparing cementless femoral stem has proved to provide effective initial stability even without the diaphyseal portion of the stem. We believe that femoral neck preservation and lateral flare of the stem provide an axial and torsional stability and more natural loading of the proximal femur.

Purpose: We have performed this study to compare the postoperative maximal flexion angle(MFA) of high-flex implants with that of conventional implants in PCL-substituted total knee arthroplasty(TKA).

Materials and Methods: The staged sequential bilateral TKAs were performed in Group 1, 35 patients(70 knees) with osteoarthritis of both knee. The conventional implant and the high-flex implant were both used in each patient by randomized method. The postoperative MFA of both type of implants was measured and analyzed at 1 year after surgery. To evaluate unidentified factors that might influence the results, such as the differences derived from personal characteristics during postoperative rehabilitation process achieving the range of motion of knee, we also analyzed the other patient groups, which were composed of Group 2(10 patients, 20 knees) bilaterally operated with conventional implants, Group 3(7 patients, 14 knees) bilaterally with high-flex implants, Group 4(13 patients, 13 knees) unilaterally with conventional implants and Group 5(17 patients, 17 knees) unilaterally with high-flex implant.

Results: In Group 1, the average postoperative MFA of high-flex implant and that of conventional implant showed no significant difference.(131.7 and 131.9 degree each) The average postoperative MFA in Group 1,2,3,4 and 5 showed no significant difference either.

Conclusion: This study indicates that the high-flex implant alone does not seem to improve the MFA as compared to the conventional implant. The status of the contralateral knee and the personal characteristics during rehabilitation seem to be more important factors in increasing the maximal flexion.

Much attention has recently been paid to bioabsorbable polymeric materials, such as poly(L-lactic acid) (PLLA), in the field of orthopedics and oral surgery. For example, PLLA has extensively been used as resorbable bone fixation devices. Recently, hydroxyapatite (HA) micro-particles filled PLLA has also been developed to improve the bioactivity, elastic modulus and absorption rate of biomedical PLLA devices. Porous structures of PLLA and HA/PLLA composites have also been developed to improve osseous conduction so that these biomaterials can be used as scaffolds in tissue engineering for rejenerative medicine. Such porous materials may also be utilized as artificial bones in orthopedics. Thus, demand for porous PLLA and HA/PLLA is rapidly increasing, however, the relationships between their mechanical behavior and properties and their microstructure have not been well understood yet.

In the present study, porous structures of PLLA and HA/PLLA with continuous pores are developed by using a solid-liquid phase separation technique and a subsequent solvent sublimation process. Size of pores and porosity are varied by changing the concentration of the solutions. Compression and shear tests are performed to evaluate the elastic moduli and strengths. Field emission scanning electron microscopy (FE-SEM) of the deformation behavior at the critical transformation points from linear elastic to nonlinear deformation is conducted to characterize the mechanism of such microscopic deformation at the critical point. Microscopic deformation and failure behavior of such porous structures are then characterized on the basis of FE-SEM results, and then correlated with the macroscopic mechanical properties. Structural modification is also tried to improve the mechanical properties to extend the applicability of the porous biomaterials.

The authors did not receive grants or outside funding in support of their research or preparation of this manuscript. They did not receive any payments or make agreements to provide such benefit from a commercial entity. No commercial entity paid or directed, or agreed to pay or direct, any benefits to any research fund, foundation, educational institution, or other non profit organization with which the authors are affiliated or associated.

Background: We observed early osteolysis and loosening of the rough surface-cement stem with a second generation metal-on-metal articulation. This study was to investigate the possible etiologic role of stem loosening and osteolysis by examination of the surface of the rough blast cement and related periprosthetic tissues that have been retrieved at revision.

Methods: We retrospectively analyzed 39 hips (37 patients) with use of metasul metal-on-metal total hip arthroplasty. Of the femoral stem, rough surface-cement stem used in 18 hips and cementless Ti-alloy stem in 21 hips. The mean duration of follow-up was 10.2 years. Of these eight rough blast cement stem were revised, seven in loosening and one in recurrent dislocation. By using energy disperse spectroscope and back scattered electron image, histologic studies were performed to the samples of periprosthetic tissues. Skin patch tests for metal hypersensitivity were done to select patients.

Results: All of cementless stems and cups showed excellent results at the last follow-up. However, eight cement hips were revised. Light microscopy showed polishing effect on retrieval femoral stem affected by the rotational force. EDS and BSE image revealed that there were abundant cement and related metal particles with size of 5-10μm. However there were few metal particles and had greater size (20–100μm) in periprosthetic tissues. Histologic finding shows perivascular infiltration of lymphocytes and accumulation of macrophages No relation was found between skin patch test and loosening.

Conclusion: These findings raise the possibility that early osteolysis and loosening in patients with metal-on-metal hip replacement were associated with rough blast surface cement stem. These mixed particles such as Fe and Zr maybe trigger lymphocytic reactivity suggestive delayed type hypersensitive reaction. This study suggests that cement stem which have rough blasted surface should be considered in metal-on-metal total hip arthroplasty.

Level of Evidence: Therapeutic level III-1(case-control study). See instructions to authors for a complete description of level of evidence.

To analyze the mechanism of failure and basic cause in cases of early failure which were required revision within 5 years index TKA. Between 1991 and 2006, 167 revisions TKA of aseptic failure were performed. Revision diagnosis or reason for failure were categorized as wear of tibial polyethylene insert, failure of tibial base plate, early imbalance between medial and lateral soft tension, tight or loose PCL and posterior capsule. The percentages of each failure category were calculated as a percentage of the overall number of revision TKA and a percentage of the early failures. A descriptive statistics were calculated for the time in situ for each failure category.

Early failure within 5 years following index TKA occurred in 33 out of 167 TKA(20.0%). Average time in situ was 38.53 months(3.21 years). Wear of the tibial polyethylene insert occurred in 12 out of 33 cases(36.4%). All cases showed tight PCL. Loosening was the second leading cause occurring in 9 cases(27.2%). Pure instability with tight MCL occurred in 3 knees. Catastrophic early wear within one year after index surgery occurred in 18 knees. The cause of failure were flat surfaced poly in 11, fracture of metal tray 2, dislocation of the thick poly insert 1 and early poly wear due to unknown cause 4.

There were multiple factors of the early failure, which could be divided into design failure and surgical skill failure. However, they worked together in most of the cases.

Many reports show good results following procedures, such as intervertebral body fusion using cage or total disc replacement, that restore adequate disc height. However, there have been no references regarding the range of normal lumbar disc height in Korean adults which can be used as a standard for the implant size. The purpose of our study is to measure the lumbar disc height on radiographs in normal Korean. 132 subjects (age range 20 to 40 years) who had no previous history of low back pain and no significant finding on physical examination were enrolled. Plain lateral lumbar spine radiograph in supine position were taken. Intervertebral disc heights were measured at anterior, middle and posterior portion of each lumbar disc. The average magnification rate was 115%, and the disc heights were corrected by the magnification rate in each segment.

Lumbar disc height showed cranio-caudal pattern in both male and female groups. L4–5 disc heights were highest at anterior, middle and posterior portion in male. L4–5 disc heights were highest at middle and posterior portion in female. L5-S1 disc height was highest at anterior portion in female, but there was no statistically significant difference between L4–5 and L5-S1 disc height at anterior portion. There was no significant difference in disc height between male and female except anterior portion of L1–2 and L2–3 disc. Statistically significant decrease in disc height was not presented in overweight person at all measured site in male and female except posterior portion of L1–2 disc in male.

This research is meaningful in that it is an attempt to provide a reference value of lumbar disc height in Korean adults, and the measured values may also be useful in manufacturing Korean modeled artificial lumbar disc prosthesis or surgical instruments for lumbar interbody fusion.

Recently with the introduction of operations using various instrument of total ankle arthroplasty, we are showing quite satisfactory short term results on the treatment of resolved pain of ankle joint. However, there have been reports of high probability of complication from total ankle arthroplasty to other arthroplasty applied to other joints. Therefore in order to make the results of ankle arthroplasty superior, it is necessary to reduce these complications. We try to analyze complications that occur often and come up with the best results.

There were 45 cases of 42 patients of HINTEGRA^® (Newdeal SA, Lyon, France) model from November 2004 to August 2006. Follow up averaged 33.5 months, the average age of patients was 61.1 years, with 14 males and 28 females. We evaluated the complications and analyzed the causes of failures. There was a total 15 cases of complications; 5 cases of medical impingement syndrome, 3 cases of varus malposition, 2 cases of delayed healing of wound, 1 case of peroneal nerve problem, medial malleolar fracture, postoperative deep infection and gouty arthritis pain and Achilles tendinitis.

Our conclusion is that total ankle arthroplasty had more complication rate than other joint arthroplasty, so we need a more meticulous preoperative and perioperative care.

Beta–tricalciumphosphate(β-TCP)coatinglayerisknown to be resorbed much faster than hydroxyapatite(HA), however, there has been few reports explaining the exact mechanism until now. Therefore, we investigated whether the resorption mechanisms of these two compounds are same, if not, what is the difference.

Eighty titanium discs with 12mm in diameter and 2mm in thickness were coated with HA(n=40) or β-TCP(n=40) by dip and spin coating method. In each group, the specimens were divided into 2 subgroups respectively; Dissolution (D, n=20) group and Osteoclast culture (C, n=20) group. The coated discs in D group were immersed in the cell culture media for 5 days, whereas, in C group, osteoclast-like cells (5×103 cells/500μ), which were isolated form human giant cell tumor, were seeded on the specimens and cultured for 5 days. Cultured cells were defined as osteoclast by the determination of osteoclast marker (tartrate-resistant acid phosphatase, TRAP). After immersion or osteoclast culture, the dissolution characteristics of coating surface were observed using light microscope (LM) and scanning electron microscope (SEM). And the area fraction of resorption lacunae formed by osteoclast was analyzed by image analysis to evaluate the activity of osteoclastic degradation.

After 5 days of dissolution, there were much more cracks and denuded areas in β-TCP coating compared to HA coating. In C group, the osteoclasts covering the coating layer were identified on LM and SEM images. Mean area fraction of resorption lacunae in HA-C group was 11.62%, which was significantly higher than that of 0.73% of β-TCP-C group (p=0.001).

We conclude that the resorption mechanism of HA and β-TCP coating layers was different each other in vitro study. The coated β-TCP was degraded mainly by dissolution and also tended to be separated from implant, on the other hand, the HA coating layer was resorbed by osteoclastic activity

Introduction: Alendronate is a well known inhibitor of osteoclastic activity and is used for the treatment of various metabolic bone diseases. Recent studies indicate that alendronate may have additional effect on osteoblastic activity. In this study, we evaluated the effect of alendronate on the osteogenic differentiation of mouse mesenchymal stem cells.

Materials and Methods: D1 cells, known as multipotent mouse mesenchymal stem cells, were cultured in the presence of osteogenic differentiation medium (ODM) for 7 days, then treated with alendronates, and 2 days later the cells were used for testing. The cell proliferation was analyzed using an MTT assay. Alizarin red staining was done for mineralization. Alkaline phosphatase activity was measured using a commercial ELISA kit. Calcification was analyzed using energy dispersive X-ray spectrophometric analysis (EDX). Osteogenic gene expression was analyzed using RT-PCR. The change of CD 44 expression was observed using confocal microscopy and FACS analysis.

Results: The D1 cells, in the presence of ODM, differentiated into osteoblasts. The evidence of osteogenic differentiation was confirmed by the positive stain by Alizarin red S, the increased activity of ALP, the increased mRNA expression of osteocalcin, a calcium peak in the EDX analysis, and by the positive immunofluorescence staining against CD 44 (an antigen detected on osteoblasts). With the addition of alendronate in the ODM medium, the osteogenic differentiation was enhanced. The enhancing effect was confirmed by the increased intensity of the Alizarin red S staining, higher activity of ALP, the higher mRNA expression of osteocalcin, a higher calcium peak in the EDX analysis, and by the increased immunofluorescence staining against CD 44 in the FACS analysis.

Conclusion: We have demonstrated that alendronate enhances osteogenic differentiation when given to mouse mesenchymal stem cells in association with the ODM. Alendronate may increase the bone density not only by inhibiting the osteoclastic activity but also by increasing the osteogenic differentiation of the mesenchymal stem cells.

Introduction: A hypothesis that combined necrotic angle measurement using MRI scans predicts the subsequent risk of collapse of femoral head osteonecrosis was tested.

Materials and Methods: Thirty-seven hips with early-stage osteonecrosis in 33 consecutive patients were investigated. The arc of the necrosis was measured by the method of Kerboul et al. using mid-coronal and mid-sagittal MRI scans of the femoral head instead of anteroposterior and lateral radiographs, and the two angles were added. Hips were classified into four categories based on the magnitude of the added angle; grade 1 (< 200), grade 2 (200–249), grade 3 (250–299), and grade 4 (≥300). After the initial evaluations, the hips were randomly assigned to a core-decompression group or a non-operatively-treated group. Patients underwent regular follow-up until femoral head collapse or for a minimum of five years.

Results: Seven hips in grade 4 and 16 hips in grade 3 developed femoral head collapse in 36 months; six out of nine hips in grade 2, and none of five hips in grade 1 developed collapse (log rank test, p< 0.01). In a retrospective analysis, none of four hips with combined necrotic angle < 190 (low risk group) collapsed, and all 25 hips with combined necrotic angle > 240 (high risk group) collapsed, and four (50%) of eight hips with combined necrotic angle between 190 and 240 (moderate risk group) collapsed during the study.

Discussion: The Kerboul combined necrotic angle ascertained by MRI scans instead of radiographs is a major predictor of future femoral head collapse.

The purpose this prospective, randomized clinical trial was to determine if unilateral or bilateral simultaneous total hip arthroplasty procedures resulted in a differing incidence of fat embolization, degree of hemodynamic compromise, levels of hypoxemia or mental status changes. Also, the incidence of fat embolization was compared between the cemented and cementless total hip arthroplasty in the patients with a unilateral- and bilateral simultaneous total hip arthroplasty.

One hundred and fifty-six consecutive patients undergoing primary total hip arthroplasty were enrolled prospectively in the study after giving informed consent. The group consisted of fifty patients undergoing bilateral simultaneous total hip arthroplasty and 106 patients undergoing unilateral total hip arthroplasty. One hundred and three hips were cemented and 103 hips were cementless. To determine the hemodynamic changes and to detect the fat and bone marrow embolization, arterial and right atrial blood samples were obtained before implantation (baseline) and at one, three, five and ten minutes after implantation of the acetabular component. Also, arterial and right atrial blood samples were obtained at one, three, five and ten minutes after implantation of the femoral component. And then blood samples were obtained at twenty-four and forty-eight hours after the operation. Arterial blood pressure, right atrial pressure, arterial oxygen tension and carbon-dioxide tension were monitored at corresponding times. The presence of lipid was determined with oil red O fat stain and the presence of cellular contents of bone marrow was determined with Wright-Giemsa stain.

The incidence of fat embolism was not statistically different (P=1.000) between the patients with a bilateral total hip arthroplasty (twenty seven patients or 54 per cent) and the patients with a unilateral total hip arthroplasty (fifty-two patients or 49 per cent). In the semiquantitative analysis of fat globules in both groups, there was no tendency to have a higher number of fat globules in the bilateral group than in the unilateral group. Also, the incidence of bone marrow embolization was not statistically different (P=0.800) between the patients with a bilateral total hip arthroplasty (eight patients or 16 per cent) and the patients with a unilateral total hip arthroplasty (fourteen patients or 13 per cent). There was no statistical difference (P=0.800) in the incidence of the presence of fat globule between the cemented total hip (thirty-four patients or 34 per cent) and the cementless total hip arthroplasty (forty-seven patients or 44 per cent). Also, there was no statistical difference (P=0.627) in the incidence of the presence of bone marrow cells between the cemented total hip arthroplasty (thirteen patients or 13 per cent) and the cement-less total hip arthroplasty (twelve patients or 11 per cent). Four patients with positive bone marrow cells had neurological manifestation. All of these four patients developed diffuse encephalopathy with confusion and agitation for about twenty-four hours.

The present study confirmed that the incidence of fat and bone marrow embolization is similar in the patients with a bilateral simultaneous-and unilateral total hip arthroplasty as well as in the patients with cemented and cementless total hip arthroplasty. The patients with bone marrow cell emboli had a significantly lower arterial oxygen tension (p=0.022) and oxygen saturation (p=0.017) than the patients without bone marrow cell emboli. On the contrary, the number of fat globules did not affect the perioperative hemodynamic changes. Encephalopathy is related to the biochemical and/or mechanical changes by bone marrow cells.

Introduction: A potential cause of premature loosening of the total hip prosthesis in patients with osteonecrosis is abnormal cancellous bone in the acetabulum and proximal femur. The purpose of this prospective study was to investigate the hypothesis that osteonecrosis is not confined to the femoral head but may extend proximally into acetabulum and distally into the proximal femoral bone. Also, the clinical and radiographic results of total hip arthroplasty with so-called third-generation cementless total hip prostheses were evaluated in sixty-three consecutive patients with osteonecrosis of the femoral head.

Materials and Methods: Twenty-five patients who had simultaneous bilateral total hip arthroplasty, and thirty-eight patients who had a unilateral total hip arthroplasty were included in the study. A cementless acetabular and femoral component were used in all hips. There were fifty-five men and eight women. The mean age at the time of the arthroplasty was 47 years (range, twenty-five to sixty-four years). We performed histological examination of the femoral heads and cancellous bone biopsies from five regions of the hip in patients undergoing total hip arthroplasty. Clinical and radiographic evaluations were performed preoperatively; at six weeks; at three, six, and twelve months; and yearly thereafter. The average duration of follow-up was 4.9 years.

Results: The majority of patients with idiopathic or alcohol induced osteonecrosis had normal bone in the acetabulum and proximal femur. The average Harris hip scores in the group treated with unilateral arthroplasty (96 points) and the group treated with bilateral arthroplasty (94 points) were similar at the time of final follow-up. No component had aseptic loosening. In one hip (1%), an acetabular component and a femoral component were revised because of infection. No hip had detectable wear or osteolysis in the acetabulum or in the proximal femur.

Conclusions: Normal or nearly normal cancellous bone in the acetabulum and proximal femur and advancements in surgical technique and better designs have greatly improved the intermediate-term survival of cementless total hip implants in young patients with osteonecrosis of the femoral head. An absence of osteolysis in these high-risk young patients is partly related to use of ceramic-on-ceramic bearing; solid fixation of the component; and short-term follow-up.

Introduction: Hyperlipidemia is related to hypercoagulability and hypofibrinolysis, which may cause a tendency to intravascular thrombosis and result in osteonecrosis (ON). Recently PPARs were confirmed to induce adipocyte differentiation, and fatty acids were identified as the transcriptional effectors for PPARs, which may cause the hyperlipidemia and fatty marrow. The aim of this study was to identify whether the adipocytic differentiation was increased in the bone marrow obtained from the femoral head in patients with osteonecrosis.

Materials and Methods: A lipid profile (cholesterol, triglyceride, LDL, and free fatty acid) was performed for patients with osteonecrosis of the femoral head. The PPARγ2 expression was checked as to whether the mesenchymal stem cells differentiate toward adipocytes rather than osteogenic cells. RT-PCRs were completed using the bone marrow stroma cells obtained during THA from 11 patients with osteonecrosis and 9 control patients. As not all of alcoholics and steroid users develop osteonecrosis, genetic differences may relate to susceptibility to the osteonecrosis. Therefore, we determined the polymorphism of the PPARγ2 gene for 34 osteonecrosis patients and 76 controls.

Results: Among 89 cases of osteonecrosis, increased free fatty acid (above 580mg%) was the most frequent finding (40.8%), and triglyceride was the next (29.6%). Cholesterol was increased in only 9.0%. Seven of the osteonecrosis cases (63.6%) and 4 of the control cases (44.4%) expressed PPARγ2. Pro/Ala (C/G) polymorphism was found in seven (20.6%) ON cases and four control cases (5.3%), and Ala/Ala (G/G) polymorphism was found in only 1 case in the control group. The numbers of patients with elevated triglyceride among osteonecrosis were much higher (71.4%) in polymorphism (C/G) than osteonecrosis (21.5%) without polymorphism.

Discussion: In conclusion, hyperlipidemia and higher expression of the PPARγ2 were found in ON, and Pro/Ala PPARγ2 polymorphism was more common in ON.

Introduction: It is desirable to delay or avoid total joint replacement in young patients who have osteonecrosis of femoral head. There are some head preserving surgical procedures that attempt this including osteotomy, core decompression, and bone grafting. The vascularized fibular graft has been reported to be a reliable procedure, but unfortunately it has donor site morbidity and is considered technically demanding. Therefore, materials have been developed to substitute for structural fibular graft. New trabecular metal has been developed to be used for osteonecrosis of femoral head. The purpose of this study was to review the clinical outcomes of trabecular metal as a treatment intervention method for osteonecrosis of the femoral head.

Materials and Methods: Seven patients (8 hips) with osteonecrosis of femoral head received core decompression and a trabecular metal implant, beginning in March 2003. The stage of osteonecrosis was I or II according to Ficat and Arlet except for one case (stage III). The procedure consists of a core decompression and insertion of trabecular metal rod (porous tantalum, Zimmer Inc./ Implex Incorporation). A Harris Hip Score was obtained pre-operatively, and at three and at three and six months. Radiographic data was collected at the same time of clinical follow-up.

Results: All 7 patients are doing well. Radiographic review shows no evidence of further femoral head collapse.

Discussion: Even though this is short term follow-up, the authors propose that the use of trabecular metal in osteonecrosis patients is simple, safe, and effective for the salvage of the hip.

Introduction: The rate of failure of primary total hip arthroplasty in patients with osteonecrosis of the femoral head is higher than in patients with osteoarthritis. The purpose of this prospective study was to document the clinical and radiographic results of arthroplasty with so-called third generation cementing and the results of second generation cementless total hip arthroplasty in ninety-eight consecutive patients with osteonecrosis of the femoral head.

Materials and Methods: Fifty patients who had simultaneous bilateral total hip arthroplasties with a cemented stem in one hip and a cementless stem in the other and forty-eight patients who had unilateral total hip arthroplasties with a cementless stem were included in the study. A cementless acetabular component was used in all hips. The presumed cause of the osteonecrosis was ethanol abuse in fifty-seven patients, unknown in twenty-seven, fracture of the femoral neck in nine, and steroid use in five. There were eighty men and eighteen women. The mean age the time of the arthroplasty was 47 years (range, twenty-six to fifty-eight years). Clinical and radiographic evaluations were performed preoperatively, at six weeks, at three, six, and twelve months; yearly thereafter. The average duration of follow-up was 9.3 years.

Results: The average Harris hip scores in the group treated with unilateral arthroplasty (97 points) and the group treated with bilateral arthroplasty (94 points) were similar at the time of final follow-up. They were also similar between the group treated with cement (mean, 96 points) and that treated without cement (95 points). No component had aseptic loosening in either group. In one hip, a cemented femoral stem (2 %) and a cementless cup were revised because of infection. Two cementless stems (2%) were revised because of fracture of the proximal part of the femur with loosening of the stem. Annual wear of the polyethylene liner averaged 0.22 mm in the group treated with cement (a zirconia head) and 0.14 mm in the group treated without cement (a cobalt-chrome head). The prevalence of osteolysis in zones 1 and 7 of femur was 16 % in the femur was 16% in the group treated with cement and 24% in the group treated without cement.

Discussion: Advances in surgical technique and better designs have greatly improved the long-term survival of cemented and cementless implants in young patients with osteonecrosis of femoral head. Although there was no aseptic loosening of the components, the high rate of linear wear of the polyethylene liner and high rate of osteolysis in these high risk young patients remain challenging problems.

To evaluate the results critically of cemented total hip arthroplasty using a fourth generation cement technique and polished femoral stem, a prospective study was performed in patients under 50 years of age who underwent primary total hip arthroplasty. 55 patients (64 hips) were enrolled in the study (43 were male and 12 were female). Average age of patients was 43.4 years (21–50 years). Elite plus stems (DePuy, Leeds, UK) were cemented and cementless Duraloc cups (DePuy, Warsaw, IN.) were implanted in all hips. 22 mm zirconia femoral head (DePuy, Leeds UK) was used in all hips. All surgeries were performed by one surgeon (YHK). The diagnosis was osteonecrosis (43 hips or 67%), osteoarthritis (5 hips or 4%), O.A. 2° to childhood T.B. or pyogenic arthritis (4 hips or 6%), R.A, (3 hips or 5%), DDH (2 hips or 3%) and others (7 hips or 11%). The average F.U. was 7.2 years (6–8 years). The 4th generation cement technique was utilized including: medullary plug, pulsatile lavage, vaccum mixing of Simplex P cement; cement gun, distal centralizer and proximal rubber seal to pressurize cement. Thigh pain was evaluated using a visual analog scale (10 points). Clinical (Harris hip score) and x-ray follow-up was performed at 6 weeks, 3 months, 6 months, 1 year and then annually. Cementing technique was graded. Abductor moment arm, femoral offset, neck and limb length, center of rotation of hips, cup angle and anteversion were measured in all hips. Linear and volumetric wear were measured by software program. Osteolysis was identified. There was no aseptic loosening or subsidence of components. One hip was revised due to late infection. Incidence of thigh pain was 11% (7 hips). All thigh pain disappeared at 1 year postoperatively. Preoperative Harris hip score was 47.2 (7–67) points and 92.2 (81–100) points at the final F.U. Femoral cementing was classified as grade A in 50 hips (78%), grade B in 6 hips (9%), and grade C1 in 8 hips (13%). There was no cases in grades C2 and D. All bones had type A femoral bone. The average linear wear and annual rate were 1.25 and 0.21 mm, respectively. The average volumetric wear was 473.48 mm3. There was statistically significant relationship between the liner wear, age (under 40), male patient, and the cup angle. Yet there was no statistical relationship between the wear and Dx., wt., hip score, R-O-M, anteversion, anbductor moment arm, femoral offset, neck and limb length and center of rotation of hip. Osteolysis was identified in zone 7A in 6 hips (9%). No hip had distal osteolysis. Advanced cementing technique, polished improved stem design, strong trabecular bone, and utilizing a smaller head and thick polys greatly improved the mid-term survival of the implants in these young patients. Good cementing technique eliminated distal osteolysis and markedly reduced the proximal osteolysis. Yet high linear and volumetric wear of polyethylene liner remains to be a challenging problem.

To determine the results critically of cementless third generation prosthesis (proximal fit, porous coated, and tapered distal stem), a prospective study was performed only in Charnley class A patients under 50 years of age who underwent primary total hip arthroplasty. 50 patients (50 hips) were included in study (37 were male and 13 were female). Average age of patients was 45.4 years (26–50 years). IPS(Immediate Postoperative Stability) stems (DePuy, Leeds, UK) were implanted in all hips. Cementless Duraloc cups (DePuy, warsaw, IN.) were used in all hips. 22 mm zirconia femoral head was used in all hips. All surgeries were performed by one surgeon (YHK). The redominant Dx. was osteonecrosis (30 hips or 60%), O.A. 2° to childhood T.B. or pyogenic arthritis (8 hips or 16%) and others (12 hips or 24%). The average F.U. was 6.3 years (5–7 years). Thigh pain was evaluated using a visual analog scale (10 points). Clinical (Harris hip score) and x-ray follow-up was performed at 6 weeks, 3 months, 6 months, 1 year and then annually. Linear and volumetric wear were measured by software program. Abductor moment arm, femoral offset, neck and limb length, center of rotation of hips, cup angle and anteversion were measured and the results were compared between normal and operated hips. All hips had satisfactory fit in A-P and lateral planes. There was no aseptic loosening or subsidence of components. Incidence of thigh pain was 14% (7 of 50 hips). All thigh pain disappeared at 3 years postoperatively. Preoperative Harris hip score was 52.3 (7–64) points and 92.9 (80–100) points at the final F.U. The values of abductor moment arm, femoral offset, neck and limb length, center of rotation of hips, cup angle and anteversion of operated hips were comparable to normal unoperated hips. The average linear wear and annual wear rate were 1.25 and 0.21 mm, respectively. The average volumetric wear was 473.48 mm3. There was statistically significant relationship between the liner wear, age (under 40), male patient, and the cup angle. Yet there was no statistical relationship between the wear and Dx., wt., hip score, R-O-M, anteversion, abductor moment arm, femoral offset, neck and limb length and center of rotation of hip. Osteolysis was identified in zones 1A and 7A in 4 hips (8%). No hip had distal osteolysis. Close fit cementless stem in coronal and saggital planes without having distal stem fixation were proved to have an excellent mechanical fixation and provided favorable mechanical loading. Close fit in the proximal canal with a circumferential porous coating reduced the incidence of osteolysis. Factors contributing to good results in this young patient group are improved design of the prosthesis, improved surgical technique, strong trabecular bone and the use of smaller femoral head and thick polys. Although there was no aseptic loosening of the hip, high incidence of linear and volumetric wear of polyethylene liner in these young patients remains to be a challenging problem.