The fully hydroxyappatite (HA) coated tapered collarless femoral stem has been available worldwide for more than 20 years. However, in Thailand this design became available in 2007. In uncemented collarless tapered and HA coated designs, axial subsidence is a sign of early failure of the implant. This leads to stem instability, loosening and dislocation. To achieve vertical stability, the surgeon should use the correct surgical technique, accurate instrumentation, appropriate stem size and fill in the femoral canal before biologic fixation occurs. This study addresses the axial subsidence of the design. 46 consecutive total hip arthroplasties with fully HA coated tapered collarless femoral stem (Corail, DePuy) were performed between July 2007-November 2009 by a single surgeon. Patients with at least 6 months follow-up were included in this study. This involved 39 stems. The average follow-up was 11.86 months (6–24 months). The average age at the time of surgery was 58.6 years (37–83 years) 25 stems (64%) had no evidence of subsidence. 14 stems (36%) had some subsidence. The average axial subsidence was 0.68 mm. The femoral canal shape was identified by canal flare index and classified to stovepipe in 12 cases, normal in 20 cases and Champagne –flute in 7 cases. The average axial subsidences at the end of the follow-up period were 0.67 mm, 0.8 mm and 0.25 mm respectively. All cases had no signs of loosening. All subsidences occurred on the first 3 months and no further subsidence was detected at 6 months or more. 12 cases (30%) were aged 60 years or older at time of surgery. In this group, 6 cases (50%) had stovepipe femoral stems (canal flare index <3.0).Methods
Results
Stability in TKR is provided by the prosthesis design, weight bearing, alignment and soft tissue envelope which triggers proprioception and neuromuscular control. For long survivorship, the least constrained design are prefered whenever possible. Today there is a discussion about the best prosthetic femoro-tibial alignment as discussed widely in Europe and more recently by Pagnano. Total knee replacements must be very stable to improve the function and the wear. We certainly performed too many releases in the past and misunderstood some of the fine tuning between posterior structures and collateral ligament frame. Technique in release tends to be more elaborated in order to address sequentially primary and secundary restraints. Release of the lateral structures often created excessive laxity in the past and can be addressed with translocation of the ligaments insertions. In case of elongated collateral structures, preserving the posterior cruciate and reconstruction of the collateral ligament allows use of less constrained prosthesis. In revision arthroplasty, the condition may be even more complex but usually the collateral ligaments may be identified. It is usually possible to find and reconstruct their insertions especially on the femoral side. Sometimes, augmentation will be needed but at the end, there is a good functional collateral ligament frame. Deformities with different soft tissues conditions and with extraarticular components in primary and revision total knee arthroplasty will be reported in severe varus, valgus and stiff knees.