Advertisement for orthosearch.org.uk
Results 1 - 5 of 5
Results per page:
Applied filters
General Orthopaedics

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_17 | Pages 20 - 20
1 Nov 2017
Singh B Prasad R Bawale R Pillai D Mohanlal P
Full Access

Introduction

Adhesive capsulitis is a common condition causing painful limitation of shoulder movements. Hydrodistension is one of the techniques, is well recognised and has shown good outcomes. However, the results of hydro distension release in secondary adhesive capsulitis are not clear.

Patients and Methods

This is a retrospective study on patients undergoing hydro distension release. Patients who had any surgical intervention were classed as secondary whilst the rest were included in the primary group. The hydro distension is a standard technique where in the senior author locates the gleno humeral joint using radio opaque dye, followed by injection of 20 mls 0.5% L-bupivacaine and 80 mg of Triamcinolone, this is followed by use of 60 mls saline to perform the hydro distension.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_10 | Pages 20 - 20
1 Oct 2015
Mohanlal P Bawale R Samsani S Jain S Joshi A Singh B Prasad R Pillai D
Full Access

Introduction

The MHRA guidelines for metal on metal (MOM) suggest cobalt and chromium levels of more than 7ppb as potential for soft tissue reaction. However, in some patients soft tissue reaction is seen even in the presence of normal serum metal ions levels.

Methods

A prospective review of all patients who had metal-on-metal hip arthroplasty was done. Patients who had both serum metal ion levels and MARS MRI scan were included in this study.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_10 | Pages 3 - 3
1 Oct 2015
Goyal A Pillai D Bawale R Singh B
Full Access

Introduction

One of the disadvantages of lateral decubitus position during arthroscopic rotator cuff repair is the difficulty to control arm rotation intraoperatively making it necessary to create additional portals for anchor placement or an additional scrubbed assistant to control arm rotation.

Methods & Technique

We describe the use of commercially available TRIMANO® support arm from Arthrex as an easy device for secure positioning during arthroscopic rotator cuff repair in lateral decubitus position. Though initially marketed to be used for shoulder arthroplasties performed in beach chair position, the senior author has used TRIMANO® to perform arthroscopic rotator cuff repair in lateral decubitus position. The device is easily connected to the operating table side rail while the affected side forearm of the patient is placed in a disposable sterile foam arm holder and attached to the TRIMANO® arm. The “Click and Move” system of the TRIMANO® allows freedom to move the arm in any direction and also provides traction to distract the joint if needed.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_10 | Pages 36 - 36
1 Oct 2015
Goyal A Pillai D Bawale R Singh B
Full Access

Accurate implant size estimation for internal fixation of long bone fractures can reduce intra-operative errors, operative time and radiation exposure. With the advent of pre-packed sterile implants, the exponential increase in the number of internal fixation devices and the lack of standard templates for them on PACS systems, templating has become increasingly difficult. This often results in the opening up of wrong implants leading to increased costs both in terms of increased operative time and additional implants. We describe a technique to determine implant size preoperatively using sterile implant boxes. Post anaesthesia and positioning, the pre packed implant box of approximate size is placed over the limb across the fracture site. An X-ray is then taken using the C-arm. In case of a plate, the number of holes desired on either side of the fracture, the shape of the implant and planned placement of screws are seen. Different implant boxes with the contained implant are placed and once the most appropriate implant for the particular fracture is reached, the box is opened and implant is kept ready for insertion. This technique has been found to be accurate, easy, reproducible and effective for estimating the implant size thereby decreasing the chances of opening wrong implants and saving the intra operative time substantially.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_10 | Pages 18 - 18
1 Oct 2015
Bawale R Samsani SR Jain S Joshi A Ahmed S Singh B Mohanlal P Pillai D Prasad R
Full Access

Background

Revision surgery for a failed metal on metal (MoM) hip arthroplasty is often unpredictable and challenging due to associated massive soft tissue and bony lesions. We present the analysis and early outcomes of revision surgery in failed MoM hip arthroplasties at our institution.

Methods

We have retrospectively analysed the findings and outcomes of revision surgery in 61 failed MoM hip arthroplasties performed between 2009 and 2014. These patients were identified in the special MoM hip surveillance pathway. All these patients underwent clinical assessment and relevant investigations. Intra-operative and histopathological findings were analysed.