Advertisement for orthosearch.org.uk
Results 1 - 6 of 6
Results per page:
Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIII | Pages 23 - 23
1 Sep 2012
Malik A Wright B Mann B Saini A Solan M
Full Access

Introduction

Foot and ankle is a well-established and growing sub specialty in orthopaedics. It accounts for 20 to 25 per cent of an average department's workload. There are two well established foot and ankle specialist journals but for many surgeons the Journal of Bone and Surgery (JBJS) remains the preeminent journal in orthopaedics and a highly sought after target journal for publication of research. It is our belief that foot and ankle surgery is underrepresented in the JBJS. We undertook a study to test this hypothesis.

Methods

We analysed all JBJS (British and American editions) volumes over a 10 year period (2001 to 2010). We recorded how many editorials, reviews, original papers and case reports were foot and ankle related.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIII | Pages 24 - 24
1 Sep 2012
Malik A Ali S Mann B Natfogel E Charalambides C
Full Access

Akins original description of his osteotomy did not describe the use of any metal work. Today the osteotomy is most commonly held and fixed with either a staple or screw. We describe the results obtained with a simple suture technique. Methods Data was collected prospectively on 125 patients undergoing an Akin osteotomy. Hallux valgus (HV) and intermetatarsal (IM) angles pre and postoperatively were recorded. Patients were reviewed at 6 week follow up. Cost analysis was also performed comparing different fixation types.

111 of the patients were female and 14 male. The average age at time of surgery was 49 years. 104 cases were in conjunction with hallux valgus correction while 21 cases were for hallux interphalangeus. The mean preoperative HV angle was 33.3 degrees (range 22 to 53), and the IM angle 13.3 degrees (range 9 to 25). At the 6 week follow up all patients had shown signs of radiological union. The postoperative HV angle was 12.4 degrees (range 7 to 17) and the IM angle 6.4 degrees (range 5 to 11). All patients maintained their correction. There were no complications, infections or fixation problems. All patients were satisfied with their surgery and would have it repeated again. The suture technique was the most cost effective method.

We describe a quick, easy, implant free method of fixing the Akin osteotomy. There is no need for metalwork removal and in today's world of austerity and the current climate of widespread budget constraints we describe a cost effective method which is clinically just as effective as methods requiring a staple or screw.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 211 - 211
1 Jun 2012
Sheeraz A Picardo N Mann B Skinner J
Full Access

Introduction

Melorheostosis is a rare bone dysplasia characterized by its classic radiographic appearance resembling dripping candle wax. The condition was originally described by Leri and Joanny in 1922. Its etiology is not fully known and treatment in most instances has been symptomatic. There are nearly 350 reported cases on melorheostosis, joint replacement has been successfully attempted in the shoulder and knee joint. We describe a case of severe melorheostosis affecting the left hip causing secondary osteo-arthritis, which was treated with a total hip replacement (THR). To the best of our knowledge this is the first reported case of its kind in the World literature.

Case history

A 52-year-old male of Indian origin with known melorheostosis of the left leg for over 30 years, presented with symptoms suggestive of severe osteo-arthritis of the left hip. Previously he had been treated for melorheostosis of the knee joint (fig 1a & 1b) with excisions and decompression of the medial femoral condyle. His left hip became more painful over the last few years. He had a fixed flexion deformity of 20° of the hip, severe muscle wasting and the affected leg was 3 cm longer than the right leg. Radiographs (fig 2a & 2b) confirmed the presence of sclerotic new bone in the acetabulum eroding the femoral head. He had the classical dripping candle wax appearance along the medial border of the neck and shaft of the femur. He underwent a THR using a Corail-Pinnacle un-cemented prosthesis using ceramic on polyethylene bearing surfaces (fig 3a & 3b). Post operatively he made a quick recovery and there was a marked improvement in his symptoms and functional outcome scores at 6 weeks.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXV | Pages 136 - 136
1 Jun 2012
Mann B Sheeraz A Shaw R Murugachandran G Ravikumar R
Full Access

INTRODUCTION

The number of patients undergoing total hip replacement surgery is rising and thus the number of periprosthetic fractures is set to increase. The risk factors for periprosthetic fractures include osteolysis, rheumatoid arthritis, osteoporosis and use of certain types of implants. Evidence from literature suggests that the mortality rate within one year is similar to that following treatment for hip fractures thus as surgeons it is important for us to understand the various management strategies of these fractures.

MANAGEMENT

Acetabular periprosthetic fractures are uncommon and classified into Type I, in which the acetabular component is radiographically stable and Type II, in which the acetabular component is unstable. It is better to prevent than to treat these fractures.

Femoral periprosthetic fractures have several classifications the most commonly used is the Vancouver classification (fig 1).

Type-A fractures are proximal and can involve the greater or lesser trochanter. These are often related to osteolytic wear debris and therefore revision of the bearing surface with bone grafting is recommended. AG involves the greater trochanter and AL involves the lesser, and these can usually be stabilised by cerclage wires supplemented by screws or plates if required (fig 2).

Management of type B fractures is more controversial and will be discussed in depth with reference to all recent papers at the meeting and data from the Swedish Joint Registry. In summary the management is shown in fig 3.

In type-C fractures, one should ensure the fixation device bypasses the femoral stem by at least 2 diaphyseal diameters. Management is as shown in fig 4.


The Journal of Bone & Joint Surgery British Volume
Vol. 94-B, Issue 4 | Pages 570 - 573
1 Apr 2012
Whittingham-Jones P Mann B Coward P Hart AJ Skinner JA

Fracture of a ceramic component in total hip replacement is a rare but potentially catastrophic complication. The incidence is likely to increase as the use of ceramics becomes more widespread. We describe such a case, which illustrates how inadequate initial management will lead to further morbidity and require additional surgery. We present the case as a warning that fracture of a ceramic component should be revised to another ceramic-on-ceramic articulation in order to minimise the risk of further catastrophic wear.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_I | Pages 60 - 60
1 Jan 2011
Mann B Gudipati S Eleftheriou K Bull T
Full Access

Purpose of study: The aim of this study was to evaluate patient-orientated outcome of spinal dynesys fixation used for low back pain and also the re-operation rate in a retrospective review of 25 cases with an average follow-up period of four years.

Materials and Methods: A total of 25 patients who had undergone semi-rigid fixation of the lumbar spine with the Dynesys system in the Chase Farm Spinal Unit between November 2001 and March 2003 were reviewed.

Results: Two patients required removal of implant and revision to solid fusion. Both were one year post Dynesys instrumentation. All other patients had their original Dynesys implant in situ at latest follow-up. Two patients were referred to a pain specialist for further management. The mean Oswestry score pre-operatively and 4.4 year post operatively were 57.2 and 37.52 respectively. The mean VAS pre op was 9.32 and post op it was 5.04.

Conclusion: Dynamic stabilisation certainly continues to remain an attractive alternative to rigid stabilisation and the few retrospective and laboratory studies that exist in the current literature reveal results which are comparable with rigid fixation.

Discussion: Though te results were promising we think a large multicentre prospective studies are required to truly enable us to evaluate the efficacy of dynamic stabilisation. This study contributes towards furthering our understanding of this complex subject.

Ethics approval: None

Interest Statement: None