The current trend in kyphosis correction is for “every level” instrumentation to achieve intraoperative stability, correction, fusion and implant longevity. We evaluate the medium term follow up of a low implant density (LID) construct. All patients with adolescent kyphosis (idiopathic or Scheurmann's) on our deformity database were identified. Radiographs and records were analysed for neurological complications, correction and revision. The constructs included were all pedicle screw anchors with multiple apical chevron osteotomies and a proximal and distal “box” of 6 to 8 screws. A four rod cantilever reduction manoeuvre with side to side connectors completed the construct. Kyphosis for any other cause was excluded. Follow up less than 12 months was excluded. 23 patients were identified with an average follow up 27 months (72 to 12 months) and a mean implant density of 1.1 (53.5% of “available” pedicles instrumented). There was 1 false positive neurophysiological event without sequelae (4%). There were no proximal junctional failures (0%). There were no pseudarthroses or rod breakages (0%). There was 1 loss of distal rod capture (early set screw failure) (4%). This was revised uneventfully. There were 4 infections requiring debridement (early series). Average initial correction was 44% (77.7 degrees to 43.5 degrees) with a 1% loss of correction at final follow up (43.5 to 44.0 degrees). The fulcrum bending correction index was 107% (based on fulcrum extension radiographs). 85% of curves had a fulcrum flexibility of less than 50%. The average cost saving compared to “every level “instrumentation was £5700 per case. This paper shows that a LID construct for kyphosis has technical outcomes as good as high density constructs. The obvious limitation of the study is the small number of patients in the cohort. The infection rates have improved with changes to perioperative process in the later series of patients. We do not believe these are a consequence of the construct itself.
Shoulder balance after surgery is one main attribute of the cosmetic outcome. It has been difficult to assess on 2D images. The balance results from the interaction of rib cage, shoulder joint and scapular positions, spinal alignment and rotation, muscle size and co-ordination and pain interaction. Attempts have been made to predict shoulder balance from radiograph measurements. There is no consensus on this. To assess whether T1 tilt has any relation to final shoulder balance after surgery.Introduction:
Attempt:
To evaluate the effect of intraoperative manoeuvres on the rib hump. Patients with AIS and a thoracic rib hump that underwent a modified Suk technique of scoliosis correction were included. The Scoligauge (Ockenden net) scolimeter app was used to measure the rib hump in Adam's position and the prone position preoperatively. The Scoligauge was used again with the patient prone in theatre, at the end of exposure of the spine, after a 90 degree rod rotation manoeuvre (CD), after a segmental derotation manoeuvre (SDR) and finally at skin closure. The patients were consented for the use of the app on the senior author's mobile device. The device was double bagged for use in theatre.Aim:
Methods:
To evaluate the effect of a stiffer rod in normalising thoracic hypokyphosis in adolescent idiopathic scoliosis (AIS). A retrospective review of AIS cases performed at our institution was carried out. In order to reduce variability, the analysis included only Lenke 1 cases which had all pedicle screw constructs, with similar constructs and implant density. Cases that underwent anterior release were excluded. All cases had the same implant (Expedium 5.5, Depuy-Synthes, Raynham, USA). The rod material differed in that some cases had 5.5 titanium, whilst others had 5.5 cobalt chrome. The preoperative and postoperative sagittal Cobb angle was measured.Aim:
Methods:
Scheuermann's kyphosis is a fixed round back deformity characterised by wedged vertebrae seen on radiograph. It is known patients presented with a negative sagittal balance before operation. Few studies investigated the outcome after operation, especially the change in the lumbar hyperlordosis. To investigate the change in sagittal profile after correction surgery.Introduction:
Aim:
Pedicle screw constructs (PSC) in scoliosis are a recently established and widely accepted method of managing scoliotic curves posteriorly. There is a perceived improved coronal and rotational correction when compared to other posterior only constructs. With continued use of this method, the authors and deformity surgeons in general have become aware of persistent thoracic hypokyphosis. This review of 3 years of scoliosis cases using PSC looks at four different implant strategies utilised to manage this problem and our current practice. These strategies were: All titanium 5.5 mm rod diameter (Expedium, Depuy spine) All titanium 5.5 mm rod diameter with periapical washers (Expedium, Depuy spine) All titanium 6.0 mm rod diameter (Pangea, Synthes) Titanium pedicle screws with 5.5 mm diameter cobalt chrome rods (Expedium Depuy spine) We have reviewed our outcomes with these strategies with respect to thoracic hypokyphosis. Strategy 1 had the highest rate of hypokyphosis on postoperative radiographs. Strategy 4 seems to have the best correction of coronal and sagittal plane abnormality post operatively. As a consequence, our current practice is the use of titanium pedicle screws and 5.5 mm diameter cobalt chrome rods when managing scoliosis with a pedicle screw construct.
We carried out a cadaver study of 16 iliolumbar veins in order to define the surgical anatomy. Two variants were found; a single vein at a mean distance of 3.74 cm from the inferior vena cava (11 of 16) and two separate draining veins at a mean distance from the vena cava of 2.98 cm for the proximal and 6.24 cm for the distal stem (5 of 16). Consistently, the proximal vein tore on attempted medial retraction of the great vessels. The mean length of the vein was 1.6 cm and its mean width 1.07 cm. Three stems were shorter than 0.5 cm. Two or more tributaries usually drained the iliacus and psoas muscles, and the fifth lumbar vertebral body. The obturator nerve crossed all veins superficially at a mean of 2.76 cm lateral to the mouth. In four of these, this distance was less than 1.5 cm. Usually, the lumbosacral trunk crossed deep, at a mean distance of 2.5 cm lateral to the mouth, but in three veins, this distance was 1 cm or less. Our findings emphasise the need for proper dissection of the iliolumbar vein before ligature during exposure of the anterior lumbar spine.
