With the rising rates, and associated costs, of total knee arthroplasty (TKA), enhanced clarity regarding patient appropriateness for TKA is warranted. Towards addressing this gap, we elucidated in qualitative research that surgeons and osteoarthritis (OA) patients considered TKA need, readiness/willingness, health status, and expectations of TKA most important in determining patient appropriateness for TKA. The current study evaluated the predictive validity of pre-TKA measures of these appropriateness domains for attainment of a good TKA outcome.

This prospective cohort study recruited knee OA patients aged 30+ years referred for TKA at two hip/knee surgery centers in Alberta, Canada. Those receiving primary, unilateral TKA completed questionnaires pre-TKA assessing TKA need (WOMAC-pain, ICOAP-pain, NRS-pain, KOOS-physical function, Perceived Arthritis Coping Efficacy, prior OA treatment), TKA readiness/willingness (Patient Acceptable Symptom State (PASS), willingness to undergo TKA), health status (PHQ-8, BMI, MSK and non-MSK comorbidities), TKA expectations (HSS KR Expectations survey items) and contextual factors (e.g., age, gender, employment status). One-year post-TKA, we assessed for a ‘good outcome’ (yes/no), defined as improved knee symptoms (OARSI-OMERACT responder criteria) AND overall satisfaction with TKA results. Multiple logistic regression, stepwise variable selection, and best possible subsets regression was used to identify the model with the smallest number of independent variables and greatest discriminant validity for our outcome. Receiver Operating Characteristic (ROC) curves were generated to compare the discriminative ability of each appropriateness domain based on the ‘area under the ROC curve’ (AUC). Multivariable robust Poisson regression was used to assess the relationship of the variables to achievement of a good outcome.

f 1,275 TKA recipients, 1,053 (82.6%) had complete data for analyses (mean age 66.9 years [SD 8.8]; 58.6% female). Mean WOMAC pain and KOOS-PS scores were 11.5/20 (SD 3.5) and 52.8/100 (SD 17.1), respectively. 78.1% (95% CI 75.4–80.5%) achieved a good outcome. Stepwise variable selection identified optimal discrimination was achieved with 13 variables. The three best 13-variable models included measures of TKA need (WOMAC pain, KOOS-PS), readiness/willingness (PASS, TKA willingness), health status (PHQ-8, troublesome hips, contralateral knee, low back), TKA expectations (the importance of improved psychological well-being, ability to go up stairs, kneel, and participate in recreational activities as TKA outcomes), and patient age. Model discrimination was fair for TKA need (AUC 0.68, 95% CI 0.63-0.72), TKA readiness/willingness (AUC 0.61, 95% CI 0.57-0.65), health status (AUC 0.59, 95% CI 0.54-0.63) and TKA expectations (AUC 0.58, 95% CI 0.54-0.62), but the model with all appropriateness variables had good discrimination (AUC 0.72, 95% CI 0.685-0.76). The likelihood of achieving a good outcome was significantly higher for those with greater knee pain, disability, unacceptable knee symptoms, definite willingness to undergo TKA, less depression who considered improved ability to perform recreational activities or climb stairs ‘very important’ TKA outcomes, and lower in those who considered it important that TKA improve psychological wellbeing or ability to kneel.

Beyond surgical need (OA symptoms) and health status, assessment of patients’ readiness and willingness to undergo, and their expectations for, TKA, should be incorporated into assessment of patient appropriateness for surgery.

In Canada, hip and knee replacements are each among the top three surgeries performed annually. In 2020, surgeries across the country were cancelled in response to the COVID-19 pandemic. We examined the impact on these joint replacement surgeries throughout the year.

Using the Discharge Abstract Database and National Ambulatory Care Reporting System, we developed a dataset of all 208,041 hip and knee replacements performed in Canada (except from Quebec) between January 1, 2019 to December 31, 2020. We compared patient and surgical characteristics (including sex, age, main diagnosis, and type of surgery (planned/urgent, primary/revision, inpatient/day surgery) in 2020 to 2019.

In 2020, hip and knee replacements volumes decreased by 18.8% compared to 2019. In April and May 2020, hip and knee replacements fell by 69.4% and 93.8%, respectively, compared to the same period in 2019. During those months, 66.5% of hip replacements were performed to treat hip fracture versus 20.2% in April and May 2019, and 64.5% of knee replacements were primaries versus 93.0% in April and May 2019. Patterns by patient age group and sex were similar compared to 2019. These patterns were similar across all provinces. By the summer, planned surgeries resumed across the country and volumes mostly returned to pre-pandemic monthly levels by the end of the year. We also found that there was an increase in the proportion of hip and knee replacements done as day surgery, with 4% in 2020 versus 1% in 2019, and patients undergoing day surgery replacement for osteoarthritis were older, with a median age of 64 for hip patients and 65 for knee patients, versus 63 for both joints the previous year.

As a result of the COVID-19 pandemic, there was a notable drop in 2020 of hip and knee replacements performed in Canada. With the demand for joint replacements continuing to grow, the resulting backlog will have an immediate, significant impact on wait lists and patient quality of life. The shift to a greater proportion of joint replacements performed as day surgeries may have an effect on patient outcomes as well shifts in access to care. It will be important to continue monitor patient outcomes following day surgery and the impact on patients for which day surgery was not an option.

Canada is second only to the United States worldwide in the number of opioid prescriptions per capita. Despite this, little is known about prescription patterns for patients undergoing total joint arthroplasty (TJA). The purpose of this study was to detail preoperative opioid use patterns and investigate the effect it has on perioperative quality outcomes in patients undergoing elective total hip and total knee arthroplasty surgery (THA and TKA).

The study cohort was constructed from hospital Discharge Abstract Data (DAD) and National Ambulatory Care Reporting System (NACRS) data, using Canadian Classification of Health Intervention codes to select all primary THA and TKA procedures from 2017-2020 in Nova Scotia. Opioid use was defined as any prescription filled at discharge as identified in the Nova Scotia Drug Information System (DIS). Emergency Department (ED) and Family Doctor (FD) visits for pain were ascertained from Physician Claims data. Multivariate logistic regression was used to test for associations controlling for confounders. Chi-squared statistics at 95% confidence level used to test for statistical significance.

In total, 14,819 TJA patients were analysed and 4306 patients (29.0%) had at least one opioid prescription in the year prior to surgery. Overall, there was no significant difference noted in preoperative opiate use between patients undergoing TKA vs THA (28.8% vs 29.4%). During the period 2017-2019 we observed a declining year-on-year trend in preoperative opiate use. Interestingly, this trend failed to continue into 2020, where preoperative opiate use was observed to increase by 15% and exceeded 2017 levels. Within the first 90 days of discharge, 22.9% of TKA and 20.9% of THA patients presented to the ED or their FD with pain related issues. Preoperative opiate use was found to be a statistically significant predictor for these presentations (TKA: odds ratio [OR], 1.45; 95% confidence interval [CI], 1.29 to 1.62; THA: OR, 1.46; 95% CI, 1.28 to 1.65).

Preoperative opioid consumption in TJA remains high, and is independently associated with a higher risk of 90 day return to the FD or ED. The widespread dissemination of opioid reduction strategies introduced during the middle of the last decade may have reduced preoperative opiate utilisation. Access barriers and practice changes due to the COVID-19 pandemic may now have annulled this effect.

The coronavirus pandemic has reduced the capability of Canadian hospitals to offer elective orthopaedic surgery requiring admission, despite ongoing and increasing demands for elective total hip and total knee arthroplasty surgery (THA and TKA). We sought to determine if the coronavirus pandemic resulted in more outpatient THA and TKA in Nova Scotia, and if so, what effect increased outpatient surgery had on 90 day post-operative readmission or Emergency Department/Family Doctor (FD) visits.

The study cohort was constructed from hospital Discharge Abstract Data (DAD), inpatient admissions, and National Ambulatory Care Reporting System (NACRS) data, day surgery observations, using Canadian Classification of Health Intervention codes to select all primary hip and knee procedures from 2005-2020 in Nova Scotia. Emergency Department and General Practitioner visits were identified from the Physician Billings data and re-admissions from the DAD and NACRS. Rates were calculated by dividing the number of cases with any visit within 90 days after discharge. Chi-squared statistics at 95% confidence level used to test for statistical significance. Knee and hip procedures were modelled separately.

There was a reduction in THA and TKA surgery in Nova Scotia during the coronavirus pandemic in 2020. Outpatient arthroplasty surgery in Nova Scotia in the years prior to 2020 were relatively stable. However, in 2020 there was a significant increase in the proportion and absolute number of outpatient THA and TKA. The proportion of THA increased from 1% in 2019 to 14% in 2020, while the proportion of TKA increased from 1% in 2019 to 11% in 2020. The absolute number of outpatient THA increased from 16 cases in 2019, to 163 cases in 2020. Outpatient TKA cases increased from 21 in 2019, to 173 in 2020. The increase in outpatient surgery resulted in an increase in 90 day presentations to ED following TKA but not THA which was not statistically significant. For outpatient THA and TKA, there was a decrease in 90 day readmissions, and a statistically significant decrease in FD presentations.

Outpatient THA and TKA increased significantly in 2020, likely due to the restrictions imposed during the coronavirus pandemic on elective Orthopaedic surgery requiring admission to hospital. The increase in outpatient surgery resulted in an increase in 90 day presentations to ED for TKA, and a decrease in 90 day readmissions and FD presentations for THA and TKA. Reducing the inpatient surgical burden may result in a post-operative burden on ED, but does not appear to have caused an increase in hospital readmission rates.

Purpose

The purpose of this study was to examine the influence of weight-bearing on the measurement of in vivo wear of total knee replacements using model-based RSA at 1 and 2 years following surgery.

Purpose

Identifying knee osteoarthritis patient phenotypes is relevant to assessing treatment efficacy. Biomechanics have not been applied to phenotyping, yet features may be related to total knee arthroplasty (TKA) outcomes, an inherently mechanical surgery. This study aimed to identify biomechanical phenotypes among TKA candidates based on demographic and gait mechanic similarities, and compare objective gait improvements between phenotypes post-TKA.

Hip abductor deficiency (HAD) associated with hip arthroplasty can be a chronic, painful condition that can lead to abnormalities in gait and instability of the hip. HAD is often confused with trochanteric bursitis and patients are often delayed in diagnosis after protracted courses of therapy and steroid injection. A high index of suspicion is subsequently warranted.

Risk factors for HAD include female gender, older age, and surgical approach. The Hardinge approach is most commonly associated with HAD because of failure of repair at the time of index surgery or subsequent late degenerative or traumatic rupture. Injury to the superior gluteal nerve at exposure can also result in HAD and is more commonly associated with anterolateral approaches. Multiple surgeries, chronic infection, and chronic inflammation from osteolysis or metal debris are also risk factors especially as they can result in bone stock deficiency and direct injury to muscle. Increased offset and/or leg length can also contribute to HAD, especially when both are present.

Physical exam demonstrates abductor weakness with walking and single leg stance. There is often a palpable defect over the greater trochanter and palpation in that area usually elicits significant focal pain. Note may be made of multiple incisions. Increased leg length may be seen.

Radiographs may demonstrate avulsion of the greater trochanter or significant osteolysis. Significant polyethylene wear or a metal-on-metal implant should be considered as risk factors, as well as the presence of increased offset and/or leg length. Ultrasound or MRI are helpful in confirming the diagnosis but false negatives and positive results are possible.

Treatment is difficult, especially since most patients have failed conservative management before diagnosis of HAD is made. Surgical options include allograft and mesh reconstruction as well as autologous muscle transfers. Modest to good results have been reported, but reproducibility is challenging. In the case of increased offset and leg length, revision of the components to reduce offset and leg length may be considered. In the case of significant instability, abductor repair may require constrained or multi-polar liners to augment the surgical repair.

HAD is a chronic problem that is difficult to diagnose and treat. Detailed informed consent appropriately setting patient expectations with a comprehensive surgical plan is required if surgery is to be considered. Be judicious when offering this surgery.

Conventional total knee arthroplasty aims to place the joint line perpendicular to the mechanical axis resulting in an overall neutral mechanical alignment. This objective is promulgated despite the fact healthy adult populations are on average in varus with few proximal tibias being neutral to the mechanical axis. The goal of a neutral mechanical axis is based largely on historical studies and the fact that it is easier to make a neutral tibial cut with conventional jigs and the eye. In order to balance the flexion and extension gaps to accommodate a neutral tibial cut, in most patients, asymmetrical distal and posterior femoral cuts are required. The resulting position of the femoral component could be considered to be “mal-rotated” with respect to the patient's soft tissue envelope. Soft tissue releases are often required to “balance” the knee. Planning and execution of the surgery are largely based off 2-dimensional radiographs which grossly oversimplifies the concept of alignment to the coronal plane, largely ignoring what happens to the knee in 3-dimensions through range of motion and 4-dimensions with respect to gait, stair climbing, etc. Subsequently, neutral mechanical for all engenders the “looks good, feels bad” phenomenon seen in many patients that may in part drive the higher dissatisfaction rates seen in knee arthroplasty globally compared to hip arthroplasty.

Additionally, because most tibias are in varus in the native state, placement of the tibial component in a neutral position results in a valgus orientated position during weight bearing post-operatively. Placing the tibial component in a varus, kinematic aligned position negates this deleterious condition and has been linked to improved outcomes in recent studies.

New imaging and surgical techniques allow for the identification of patient specific alignment targets and the ability to more precisely execute the surgical plan with respect to 3-dimensional placement of the components. Long-term outcomes studies as well as more recent studies on “kinematic” positioning suggest that deviation away from a neutral mechanical target is safe with respect to survivorship and provides better function with a more “natural” feeling knee.

Conventional total knee arthroplasty aims to place the joint line perpendicular to the mechanical axis resulting in an overall neutral mechanical alignment. This objective is promulgated despite the fact healthy adult populations are on average in varus with few proximal tibias being neutral to the mechanical axis. The goal of a neutral mechanical axis is based largely on historical studies and the fact that it is easier to make a neutral tibial cut with conventional jigs and the eye. In order to balance the flexion and extension gap to accommodate a neutral tibial cut, in most patients, asymmetrical distal and posterior femoral cuts are required. The resulting position of the femoral component could be considered to be “mal-rotated” with respect to the patient's soft tissue envelope. Soft tissue releases are often required to “balance” the knee. Planning and execution of the surgery are largely based off 2-dimensional radiographs which grossly oversimplifies the concept of alignment to the coronal plane, largely ignoring what happens to the knee in 3 dimensions through range of motion and 4 dimensions with respect to gait, stair climbing, etc. Subsequently, sticking with neutral mechanical for all engenders the “looks' good, feels bad” phenomenon seen in many patients that may in part drive the higher dissatisfaction rates seen in knee arthroplasty globally compared to hip arthroplasty.

New imaging and surgical techniques allow for the identification of patient specific alignment targets and the ability to more precisely execute the surgical plan with respect to 3-dimensional placement of the components. Long-term outcomes studies as well as more recent studies on “kinematic” positioning suggest that deviation away from a neutral mechanical target may in fact be safe with respect to survivorship and provide better function with a more “natural” feeling knee.

Like all surgery, if you can see it, you can usually get the job done. This is especially true for extracting well-fixed components, as iatrogenic bone loss is a serious consideration regarding the reconstruction challenge. While reasons for revision are varied, several general principles are useful to consider during the pre and peri-operative course.

Pre-operatively, forewarned is forearmed. Certain factors pre-operatively can suggest the degree of operative difficulty regarding exposure. Revisions for stiffness obviously would suggest difficulty with exposure. Revisions in knees with patellar baja are almost always challenging as the patella is difficult to evert. When revising infected knees, an exuberant synovial response can result in beefy, friable synovium that has a volume effect with decreased tissue compliance. Further, the hyperemic friable tissue bleeds easily, even with tourniquet, and is difficult to anticoagulate.

Peri-operatively, the general principles to consider are as follows: 1) Don't rush exposure. Good exposure is the result of a series of deliberate and sequential steps that safely reduce tissue volume and improvement in tissue compliance. These steps include in almost all cases: a. Extend the incision as necessary, there is no call for minimally invasive revision knee surgery; b. Tenolysis of the patellar tendon; c. Clearing of the medial and lateral gutter; d. Clearing of the flexion space; e. Clearing of quadriceps adhesions.

2) Protect the extensor mechanism, above all else. Carefully monitor the insertion of the patellar tendon when beginning to flex the knee. If an avulsion begins, back off flexion and spend more time on clearing of scar tissue, as above. If still unsuccessful, then extensile exposure should be considered, such as a quadriceps snip. Be especially careful when osteolysis is present around the tibial tubercle.

3) The most difficult area to of the knee to expose in revision surgery is the posterior lateral corner, resulting in difficulty in exposing the posterior lateral femur and the posterior corner of the tibial component. Extensile exposures do not necessarily result in complete exposure of these regions. Redoubling efforts to remove scar tissue is often more successful. Bovie dissection of soft tissue on the proximal medial tibia can assist, with extension back to the semimembranosus insertion sometimes being necessary. While adequate exposure can result because of the increased ability to externally rotate the tibia, this exposure can also destabilise the medial side of the knee, sometimes resulting in the need to add constraint. The pros and cons need to be considered on a case-by-case basis.

4) Be judicious in the utilization of extensile exposures, and choose the exposure technique best suited for the situation. If the patellar tendon is normal, consider a simple quadriceps snip. If the knee is particularly stiff or the tibial tubercle or patellar tendon insertion is in jeopardy, then the snip can be extended into a V-Y turndown. If the patellar tendon is contracted resulting in patellar baja, then a tibial tubercle osteotomy (TTO) can be considered. Careful removal of tissue in scar tissue, as above, allows for relative external rotation of the tibia on the femur that translates the patella laterally, reducing the need for TTO. TTO can also be effective when approaching a cemented tibial stem.

Background

Total knee arthroplasty (TKA) is a routine, cost-effective treatment for end-stage arthritis. While the evidence for good-to-excellent patient-reported outcomes and objective clinical data is present, approximately 20% of patients continue to be dissatisfied with results of their surgery. Dissatisfaction is strongly correlated with unmet patient expectations, and these patients may experience a higher cost of care due to recurring office and emergency visits. Therefore, this survey asked a large group of United States (U.S) and international surgeons to prioritize areas of opportunity in primary TKA. Specifically, we compared surgeon responses regarding: 1) the top 5 areas needing improvement; which were stratified by: 2) surgeons' years of experience; and 3) surgical case volume.

Hospital type is an indicator for structures and processes of care. The effect of hospital type on hip fracture in-hospital mortality is unknown. We determine whether hip fracture in-hospital mortality differs according to hospital type.

We retrieved records of hip fracture for 167,816 patients aged 65 years and older, who were admitted to a Canadian acute hospital between 2004 and 2012. For each hospital type we measured and compared the cumulative incidence of in-hospital death by in-patient day, accounting for discharge as a competing event.

The cumulative incidence of in-hospital death at in-patient day 30 was lowest for teaching hospital admissions (7.3%) and highest for small community hospital admissions (11.5%). The adjusted odds of in-hospital death were 12% (95% CI 1.06–1.19), 25% (95% CI 1.17–1.34), and 64% (95% CI 1.50–1.79) higher for large, medium, and small community hospital versus teaching hospital admissions. The adjusted odds of nonoperative death were 1.6 times (95% CI 1.42–1.86), and 3.4 times (95% CI 2.96–3.94) higher for medium and small community hospital versus teaching hospital admissions. The adjusted odds of postoperative death were 14% (95% CI 1.07–1.22) and 20% (95% CI 1.10–1.31) higher at large and medium community hospitals versus teaching hospitals. The adjusted odds of postoperative death were largest at small community hospitals but the confidence interval crossed 1 (OR = 1.25, 95% CI 0.92–1.70).

A higher proportion of hip fracture patients die at non-teaching compared to teaching hospitals accounting for length of stay. Higher mortality at small community hospitals may reflect disparities in access to resources and delay to treatment.

Significant advances in perioperative pain management, such as multimodal periarticular injection, and subtler advances in surgical technique have resulted in improved postoperative experiences for patients with less pain, earlier rehabilitation, and shorter stays in hospital. Concurrently, and by applying the learnings from above, significant advances have been made in unicompartmental knee arthroplasty care pathways leading to safe programs for outpatient surgery. A natural extension of this process has been the exploration of outpatient total joint arthroplasty (TJA).

There are some papers written on the topic, but not many. The papers are generally report that outpatient TJA can be a safe and effective procedure, but the devil is in the detail. Firstly, most authors in this field carry a bias towards positive outcomes given they fact they are expert, academic, and innovative surgeons, often having controlling interest in the management of the complete perioperative pathway. Secondly, and largely as a result of the above, there is a major selection bias as to who receives outpatient TJA. In all cases, the patients are younger, fitter, and with less comorbidities. Patients reported in the published literature on outpatient TJA therefore do not represent the average patient that the average surgeon would operate on. Recall, TJA patients are becoming heavier and older patients (85+) are also receiving TJA at increasing rates.

It is useful to remember that TJA is a stressful event from a physiological perspective for the patient. Serious complications, including death, can and do occur. Further, some significant events, like cardiac ischemia occur around the second to third day postoperatively. These patients often require medical intervention for stabilization and need readmission when sent home before these events occur. This obviously is not a trivial issue given the penalties applied to hospitals in the US for early readmissions after TJA.

The fundamental questions at this early stage of outpatient TJA are 1) whether it is scalable to a larger audience, and 2) whether or not processes can be developed to make it a routine, standard of care. Given that the current literature is limited and written by expert surgeons on a highly select group of patients, and given that patients in general are getting older and less healthy, it is difficult to imagine a future of TJA as drive through surgery.

Articulation of the polyethylene (PE) insert between the metal femoral and tibial components in total knee replacements (TKR) results in wear of the insert which can necessitate revision surgery. Continuous PE advancements have improved wear resistance and durability increasing implant longevity. Keeping up with these material advancements, this study utilises model-based radiostereometric analysis (mbRSA) as a tool to measure in vivo short-term linear PE wear to thus predict long-term wear of the insert.

Radiographic data was collected from the QEII Health Sciences Centre in Halifax, NS. Data consisted of follow-up RSA examinations at post-operative, six-, 12-, and 24-month time periods for 72 patients who received a TKR. Implanted in all patients were Stryker Triathlon TKRs with a fixed, conventional PE bearing of either a cruciate retaining or posterior stabilised design. Computer-aided design (CAD) implant models were either provided by the manufacturer or obtained from 3D scanned retrieved implants. Tibial and femoral CAD models were used in mbRSA to capture pose data in the form of Cartesian coordinates at all follow-ups for each patient. Coordinate data was manually entered into a 3D modeling software (Geomagic Studio) to position the implant components in virtual space as presented in the RSA examinations. PE wear was measured over successive follow-ups as the linear change in joint space, defined as the shortest distance between the tibial baseplate and femoral component, independently for medial and lateral sides. A linear best-fit was applied to each patient's wear data; the slope of this line determined the annual wear rate per individual patient. Wear rates were averaged to provide a mean rate of in vivo wear for the Triathlon PE bearing.

Mean linear wear per annum across all 72 patients was 0.088mm/yr (SD: 0.271 mm/yr) for the medial condyle and 0.032 mm/yr (SD: 0.230 mm/yr) for the lateral condyle. Cumulative linear wear at the 2-year follow-up interval was 0.207mm (SD: 0.565mm) and 0.068mm (SD: 0.484mm) for the medial and lateral condyles, respectively.

Linear PE wear measurements using mbRSA and Geomagic Studio resulted in 0.056mm/yr additional wear on the medial condyle than the lateral condyle. Large standard deviations for yearly wear rates and cumulative measurements demonstrate this method does not yet exhibit the accuracy needed to provide short-term in vivo wear measurement. Inter-patient variability from RSA examinations is likely a source of error when dealing with such small units of measure. Further analysis on patient age and body mass index may eliminate some variability in the data to improve accuracy. Despite high standard deviations, the results from this research are in proximity to previously reported linear wear measurements 0.052mm/yr and 0.054mm/yr. Linear wear analysis will continue upon completion of >100 patients, in addition to volumetric PE wear over the entire articulating surface.

Over the past 15 years metal on metal hip resurfacing (MOMHR) has seen a spectacular resurgence in utilization followed by near abandonment of the procedure. A select group of surgeons still offer the procedure to a select group of patients suggesting that there are benefits of MOMHR over total hip arthroplasty (THA). This is problematic for the following reasons:

1)

MOMHR does not lead to increased survivorship. The Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) and the England and Wales National Joint Registry, from countries with high rates of utilization of MOMHR, both report significantly worse survivorship with MOMHR compared to all types of conventional THA. Risk factors for revision of resurfacing were older patients, females, smaller femoral head size, patients with developmental dysplasia, and certain implant designs.

In conclusion, it is relatively straightforward to oppose and argue against the use of hip resurfacings as they have worse outcomes in all National Joint Registries, produce metal ions with significant clinical consequences, are more invasive, are difficult to revise with subsequent inferior outcomes when compared to a conventional primary THA, and do not provide better function. These adverse features come with a premium price when compared to a conventional THA.

The trabecular metal Monoblock TKR is comprised of a porous tantalum base plate with the polyethylene liner embedded directly in the porous metal. An alternative design, the trabecular metal Modular TKR, allows polyethylene liner insertion into the locking base plate after base plate implantation, but removes the low modulus of elasticity that was inherent in the Monoblock design. The purpose of this study was to compare the fixation of the Monoblock and Modular trabeucular metal base plates in a randomised controlled trial.

Fifty subjects (30 female) were randomly assigned to receive the uncemented trabecular metal Monoblock or uncemented trabecular metal Modular knee replacement. A standard procedure of tantalum marker insertion in the proximal tibial and polyethylene liner was followed with uniplanar radiostereometric analysis (RSA) examinations immediately post-operatively and at 6 week, 3 month, 6 month, and 12 month follow-ups. The study was approved by the Research Ethics Board and all subjects signed an Informed Consent Form.

Twenty-one subjects received Monoblock components and 20 received Modular components. An intra-operative decision to use cemented implants occurred in 5 cases and 4 subjects did not proceed to surgery after enrollment. The clinical precision of implant migration measured as maximum total point motion (MTPM) was 0.13 mm (upper limit of 95% confidence interval of double exams). Implant migration at 12 months was 0.88 ± 0.64 mm (mean and standard deviation; range 0.21 – 2.84 mm) for the Monoblock group and 1.60 ± 1.51 mm (mean and standard deviation; range 0.27 – 6.23 mm) for the Modular group. Group differences in 12 month migration approached clinical significance (p = 0.052, Mann Whitney U-test).

High early implant migration is associated with an increased risk for late aseptic loosening. Although not statistically significant, the mean migration for the Modular component group was nearly twice that of the Monoblock, which places it at the 1.6 mm threshold for “unacceptable” early migration (Pijls et al 2012). This finding is concerning in light of the recent recall of a similar trabecular metal modular knee replacement and adds validity to the use of RSA in the introduction of new or modified implant designs.

Reference: Pijls, B.G., et al., Early migration of tibial components is associated with late revision: a systematic review and meta-analysis of 21,000 knee arthroplasties. Acta Orthop, 2012. 83(6): p. 614–24.

Modular total hip arthroplasty (MTHA) stems were introduced in order to provide increased intra-operative flexibility for restoring hip biomechanics, improving stability and potentially reducing revision risk. However, the additional interface at the neck-body junction provides another location for corrosion or mechanical failure of the stem. To delineate the mid term revision risk of MTHA stems, we examined data from the Canadian Joint Replacement Registry (CJRR) at the Canadian Institute for Health Information (CIHI).

Kinectiv, Profemur and Rejuvenate modular stems were identified from CJRR records submitted between 2004 and 2014. Revision status was determined by examining the discharge abstract database (DAD) also housed by CIHI, which collects information on all revisions, regardless of whether the procedure was submitted to CJRR.

A total of 2446 modular stems were identified with a mean follow up of 4.2 years (range 0 to 10). Their usage peaked in 2012 (the first year of mandatory CJRR form submission for BC, ON and MB), and dropped rapidly thereafter. A total of 155 (6.3%) were revised. This consisted of 5/301 Kinectiv (1.7%), 141/2050 ProFemur (6.9%), and 9/96 Rejuvenate (9.4%) stems. As a group, this falls below the National Institute for Clinical Excellence (NICE) guidelines of 95% survival at 10 years.

While MTHA stems were introduced to improve outcomes and reduce revision risk, our findings of a 6.3% revision risk at a mean follow up of 4.2 years does not appear to support this.

Total knee arthroplasty (TKA) has been shown to improve knee joint function during gait post-operatively. However, there is considerable patient to patient variability, with most gait mechanics metrics not reaching asymptomatic levels. To understand how to target functional improvements with TKA, it is important to identify an optimal set of functional metrics that remain deficient post-TKA. The purpose of this study was to identify which combination of knee joint kinematics and kinetics during gait best discriminate pre-operative gait from postoperative gait, as well as post-operative from asymptomatic.

Seventy-three patients scheduled to receive a TKA for severe knee osteoarthritis underwent 3D gait analysis 1 week before and 1 year after surgery. Sixty asymptomatic individuals also underwent analysis. Eleven discrete gait parameters were extracted from the gait kinematic and kinetic waveforms, as previously defined (Astephen et al., J Orthop Res., 2008). Stepwise linear discriminant analyses were used to determine the sets of parameters that optimally separated pre-operative from post-operative gait, and post-operative from asymptomatic gait. Cross-validation was used to quantify group classification error.

Knee flexion angle range, knee adduction moment first peak, and gait velocity were included in the optimal discriminant function between the pre- and post-operative groups (P<0.05), with relatively equal standardised canonical coefficients (0.567, −0.501, 0.565 respectively), and a total classification rate of 74%. A number of metrics were included in the discriminant function to optimally separate post-operative and asymptomatic gait function, including the knee flexion angle range, peak stance knee flexion angle, minimum late stance knee extension moment, minimum mid-stance knee adduction moment, and peak knee internal rotation moment (P<0.05). The mid-stance knee adduction moment had the largest standardised canonical coefficients in the function, and 89.5% of cases were correctly classified.

Separation of pre and post-operative gait patterns included only three parameters, suggesting that current standard of care TKA significantly improves only walking velocity, knee flexion angle range, and the peak value of the knee adduction moment. A number of gait metrics, which were included in the discriminant function between post-operative and asymptomatic gait, could benefit from further improvement either through rehabilitation or design. With almost 90% classification, separation of post-operative gait function from asymptomatic levels is significant. The consolidation of knee joint function during gait into single, discrete discriminant scores allows for an efficient summary representation of patient-specific (or implant-specific) improvement in gait function from TKA surgery.

Introduction

Debate over appropriate alignment in total knee arthroplasty has become a topical subject as technology allows planned alignments that differ from a neutral mechanical axis. These surgical techniques employ patient-specific cutting blocks derived from 3D reconstructions of pre-operative imaging, commonly MRI or CT. The patient-specific OtisMed system uses a detailed MRI scan of the knee for 3D reconstruction to estimate the kinematic axis, dictating the cutting planes in the custom-fit cutting blocks machined for each patient [1, 2].

The purpose of this study was to evaluate the correlation between post-operative limb alignment and implant migration in subjects receiving shape match derived kinematic alignment.

Introduction

Surgical techniques for implant alignment in total knee arthroplasty (TKA) is a expanding field as manufacturers introduce patient-specific cutting blocks derived from 3D reconstructions of pre-operative imaging, commonly MRI or CT. The patient-specific OtisMed system uses a detailed MRI scan of the knee for 3D reconstruction to estimate the kinematic axis, dictating the cutting planes in the custom-fit cutting blocks machined for each patient. The resulting planned alignment can vary greatly from a neutral mechanical axis. The purpose of this study was to evaluate the early fixation of components in subjects randomized to receive shape match derived kinematic alignment or conventional alignment using computer navigation. A subset of subjects were evaluated with gait analysis.