Advertisement for orthosearch.org.uk
Results 1 - 6 of 6
Results per page:
Applied filters
General Orthopaedics

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_10 | Pages 33 - 33
1 Oct 2015
Sonanis S Kumar S Deshmukh N
Full Access

Trauma & Orthopaedic Department, Bronglais Hospital & Hywel Dda University Health Board, Aberystwyth, UK

Auto-CAD study is done to observe the effects of head neck ratio (HNR) in joint replacements. Total hip replacement joints were reconstructed on CAD with increasing diameter of the head keeping neck diameter constant in 1997. Simulation was done and Range of Movement (ROM), impingement and stability of the hip joint was noted. A graph was plotted with HNR on X-axis and ROM on Y-axis. It was observed that as the HNR increases the ROM of the joint is increased, impingement is reduced and stability is also increased. It is also observed that diameter of the head and neck is more important than considering only head diameter of the hip joint. The graphical analysis confirms that different diameters of the head may have same HNR depending on the neck diameter. So even in smaller diameter head the HNR may be more due to smaller diameter neck and may be more advantages than larger diameter head with bigger neck having smaller HNR. We conclude that HNR is more important than the head diameter alone in hip replacements.


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_18 | Pages 11 - 11
1 Dec 2014
Sonanis S Kumar S Deshmukh N
Full Access

Auto-CAD study is done to observe effects of head neck ratio (HNR) in hip replacements.

Total hip replacement joints were reconstructed on CAD with increasing diameter of the head keeping neck diameter constant in 1997. Simulation was done and Range of Movement (ROM), impingement and stability of the hip joint was noted. A graph was plotted with Head Neck Ratio (HNR) on X-axis and ROM on Y-axis. It was observed that as the HNR increases the ROM of the joint is increased, impingement is reduced and stability is also increased. It is also observed that diameter of the head and neck is more important than considering only head diameter of the hip joint. The graphical analysis confirms that different diameters of the head may have same HNR depending on the neck diameter. So even in smaller diameter head the HNR may be more due to smaller diameter neck and may be more advantages than larger diameter head with bigger neck having smaller HNR.

We conclude that HNR is more important than the head diameter alone in hip replacements.


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_18 | Pages 12 - 12
1 Dec 2014
Sonanis S Kumar S Bodo K Deshmukh N
Full Access

Tunning fork lines (TFL) were drawn on ankle anterior-posterior radiographs to assess the talar shift in ankle fractures.

A 3-D ankle joint reconstruction was prepared by mapping normal ankle joint using auto CAD in 1997. TFL were drawn using normal anatomical landmarks on saggital, coronal and transverse planes. The ankle joint anatomical relationship with talus was studied in various rotation simulating radiographic anterior-posterior views and talar shift was studied. Between 2006 and 2012 on antero-posterior view of ankle radiographs and PACS, TFL were drawn. The premise is that in a normal radiograph the superior-lateral dome of the talus lies medial to the handle of TFL, and in ankle with talar shift the dome of the talus would cross this line laterally. In two district hospitals 100 radiographs were observed by 4 observers in 67 males and 33 females with mean age of 49 (15–82) years. The TFL confirmed talar shift with sensitivity of 99.2 % showing talarshift and inferior tibio-fibular ankle diastasis.

We conclude that in ankle anterio-posterior view it is possible to comment on the talar shift and diastasis of the ankle joint, even if proper ankle mortise views were not available.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_19 | Pages 20 - 20
1 Apr 2013
Sonanis SV Kumar S Deshmukh N Wray C Beard DJ
Full Access

Introduction

A prospective study was done using Kirschner (K) wires to internally fix capitellum fractures and its results were analysed.

Materials/Methods

Since 1989, unstable displaced 17 capitellum fractures were anatomically reduced and internally fixed by inserting K wires in coronal plane from the capitellum into trochlea. The lateral end of wires were bent in form of a staple behind the fracture plane and anchored into the lateral humeral condyle with pre-drilled holes. Additional screws were used in 2 cases to stabilise the lateral pillar comminution. The capitellum was exposed with a limited modified lateral elbow approach between anconeus and extensor carpi ulnaris. The capsule was reflected anteriorly to expose the capitellum and trochlea. The deeper dissection was limited anterior to lateral collateral ligament (LCL) keeping it intact. The capitellum fragment was reposition under the radial head and anatomically reduced by full flexion of elbow and then internally fixed. Total 17 patients (7 males and 10 females) with average ages 34.8 years(14 to 75) had fractures, Type I: (Hans Steinthal #) 12, Type II: (Kocher Lorez #) 1, and Type III: (Broberg and Morrey #) 4. Post-operatively the patients were not given any immobilisation and were mobilised immediately.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 10 - 10
1 Jan 2013
Sonanis S Kumar S Saleeb H Deshmukh N
Full Access

Tunning fork lines (TFL) were drawn on ankle anterior-posterior radiograph to assess the talar shift.

A 3-D ankle joint reconstruction was prepared by mapping normal ankle joint using auto CAD in 1997. Tunning fork lines were drawn using normal anatomical landmarks on saggital, coronal and transverse planes. The ankle joint anatomical relationship with talus was studied in various rotation simulating radiographic anterior-posterior views and talar shift was studied.

Between 2006 and 2012 on antero-posterior view of ankle radiographs and PACS, ‘Tunning Fork Lines’ (TFL) were drawn. The superior two vertical lines of the TFL were drawn above the ankle joint perpendicular to the distal tibial articular surface. First line tangent to anterior lip of the inferior tibio-fibular joint and second line tangent to the posterior lip of the inferior tibio-fibular joint parallel to each other. The horizontal third line was drawn parallel to distal tibial articular surface perpendicular to first two lines connecting them. The fourth line (handle of the tunning fork) was drawn vertically below the ankle joint midway between the first two lines perpendicular to the third line. In a normal radiograph the superior-lateral dome of the talus lies medial to the handle of TFL, and in ankle with talar shift the dome of the talus crosses this line laterally. In two district hospitals 100 radiographs were observed by 4 observers in 67 males and 33 females with mean age of 49 (15–82) years. The TFL confirmed talar shift with sensitivity of 99.2 % showing talarshift and inferior tibio-fibular ankle diastasis.

We conclude that in ankle anterio-posterior view it is possible to comment on the talar shift and diastasis of the ankle joint if proper ankle mortise view is not available.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_II | Pages 112 - 112
1 Feb 2012
Charity R Foukas A Deshmukh N Grimer R
Full Access

Fifty-six patients with stage II-B osteosarcoma around the knee were followed-up for a minimum of 92 months. The percentage of tumour cells expressing VEGF/MMP-9 was assessed using immunohistochemistry. The relationship between VEGF/MMP-9 expression and survival was assessed using Kaplan-Meier and Cox regression models. Patients with tumours expressing VEGF in >25% of their cells had shorter overall (p=0.019) and disease-free survival (p=0.009). Patients with tumours expressing MMP-9 had shorter overall (p=0.0042) and disease-free survival (p=0.0004). There was an association between VEGF and MMP-9 expression (p=0.021). The negative effects of VEGF/MMP-9 expression on survival were independent of traditional prognostic factors.