Aims. To discover how the management of traumatic anterior shoulder dislocation in the young patient (17-25) has changed, if at all, over the past six years. Methods. The same postal questionnaire was sent in 2002 and 2009 to 164 shoulder surgeons. Questions were asked about initial reduction, investigation undertaken, timing of surgery, preferred stabilisation procedure, period of immobilisation and rehabilitation programme instigated in first-time and recurrent traumatic dislocators. Summary of Results. Response rate - 92% (2009), 83% (2002). The most likely management of a young traumatic shoulder dislocation:. Reduction under sedation in A&E by A&E doctor (80%). Apart from X-ray, no investigations are performed (80%). Immobilisation for 3 weeks, followed by physiotherapy (82%). 68% would consider stabilisation surgery for first time dislocators (especially professional sportsmen) compared to 35% (2002). Of them, nearly 90% would perform an arthroscopic stabilisation vs. 57.5% (2002). For recurrent dislocators:. 75% would consider stabilisation after a second dislocation. 85% would investigate prior to surgery, choice of investigation being MR arthrogram (52%), compared to 50% (2002). 77% would perform arthroscopic stabilisation vs. 18% (2002), commonest procedure-arthroscopic Bankart repair using biodegradable bone anchors (62% 2009 vs. 27% in 2002). Immobilisation for 3 weeks, full range of motion 1-2 months and return to contact sports 6 - 12 months. Conclusion. There has been a remarkable change in practice compared to the previous survey. A significant proportion of Orthopaedic Surgeons would consider stabilisation in young first-time dislocators instead of conservative management. Arthroscopic stabilisation is now the preferred technique compared to open stabilisation whenever possible. Surgeons are using more investigations prior to listing the patient for surgery, namely the MR arthrogram. There is also an increased use of bio-degradable anchors as compared to metallic bone anchors in 2002

Clinical examination for shoulder conditions is not perfect. For that reason MRI tends to be accepted as the ‘gold standard’ and operative decisions may be based more on the MRI than the clinical findings. This has led to inappropriate treatment including unnecessary operations.

MRI's are not perfect either. Normal variations and abnormalities in asymptomatic people must be considered.

Clinical examination by a combination of tests can make MRI unnecessary or determine whether MRI abnormalities are relevant. This paper concentrates on rotator cuff tears.

Glenoid baseplate orientation in reverse shoulder arthroplasty (RSA) influences clinical outcomes, complications, and failure rates. Novel technologies have been produced to decrease performance heterogeneity of low and high-volume surgeons. This study aimed to determine novice and experienced shoulder surgeon's ability to accurately characterise glenoid component orientation in an intra-operative scenario. Glenoid baseplates were implanted in eight fresh frozen cadavers by novice surgical trainees. Glenoid baseplate version, inclination, augment rotation, and superior-inferior centre of rotation (COR) offset were then measured using in-person visual assessments by novice and experienced shoulder surgeons immediately after implantation. Glenoid orientation parameters were then measured using 3D CT scans with digitally reconstructed radiographs (DRRs) by two independent observers. Bland-Altman plots were produced to determine the accuracy of glenoid orientation using standard intraoperative assessment compared to postoperative 3D CT scan results. Visual assessment of glenoid baseplate orientation showed “poor” to “fair” correlation to 3D CT DRR measurements for both novice and experienced surgeon groups for all measured parameters. There was a clinically relevant, large discrepancy between intra-operative visual assessments and 3D CT DRR measurements for all parameters. Errors in visual assessment of up to 19.2 degrees of inclination and 8mm supero-inferior COR offset occurred. Experienced surgeons had greater measurement error than novices for all measured parameters. Intra-operative measurement errors in glenoid placement may reach unacceptable clinical limits. Kinesthetic input during implantation likely improves orientation understanding and has implications for hands-on learning

The Latarjet procedure is a well described method to stabilize anterior shoulder instability. There are concerns of high complication rates, one of these being a painful shoulder without instability due to screw irritation. The arthroscopic changes in the shoulder at time of screw removal compared to those pre-Latarjet have not been described in the literature. We conducted a retrospective review of arthroscopic videos between 2015 and 2022 of 17 patients at the time of their Latarjet screw removal and where available (n=13) compared them to arthroscopic findings at time of index Latarjet. Instability was an exclusion criterion. X-rays prior to screw removal were assessed independently by two observers blinded to patient details for lysis of the graft. Arthroscopic assessment of the anatomy and pathological changes were made by two shoulder surgeons via mutual consensus. An intraclass correlation coefficient (ICC) was analyzed as a measure for the inter-observer reliability for the radiographs. Our cohort had an average age of 21.5±7.7 years and an average period of 16.2±13.1 months between pre- and post-arthroscopy. At screw removal all patients had an inflamed subscapularis muscle with 88% associated musculotendinous tears and 59% had a pathological posterior labrum. Worsening in the condition of subscapularis muscle (93%), humeral (31%) and glenoid (31%) cartilage was found when compared to pre-Latarjet arthroscopes. Three failures of capsular repair were seen, two of these when only one anchor was used. X-ray review demonstrated 79% of patients had graft lysis. Excellent inter-rater reliability was observed with an ICC value of 0.82. Our results show a high rate of pathological change in the subscapularis muscle, glenoid labrum and articular cartilage in the stable but painful Latarjet. 79% of patients had graft lysis with prominent screws on X-ray

We test the clinical validity and financial implications of the proposed Choosing Wisely statement: “Using ultrasound as a screening test for shoulder instability is inappropriate in people under 30 years of age, unless there is clinical suspicion of a rotator cuff tear.”. A retrospective chart review from a specialist shoulder surgeon's practice over a two-year period recorded 124 patients under the age of 30 referred with shoulder instability. Of these, forty-one had already had ultrasound scans performed prior to specialist review. The scan results and patient files were reviewed to determine the reported findings on the scans and whether these findings were clinically relevant to diagnosis and decision-making. Comparison was made with subsequent MRI scan results. The data, obtained from the Accident Compensation Corporation (ACC), recorded the number of cases and costs incurred for ultrasound scans of the shoulder in patients under 30 years old over a 10-year period. There were no cases where the ultrasound scan was considered useful in decision-making. No patient had a full thickness rotator cuff tear. Thirty-nine of the 41 patients subsequently had MRI scans. The cost to the ACC for funding ultrasound scans in patients under 30 has increased over the last decade and exceeded one million dollars in the 2020/2021 financial year. In addition, patients pay a surcharge for this test. The proposed Choosing Wisely statement is valid. This evidence supports that ultrasound is an unnecessary investigation for patients with shoulder instability unless there is clinical suspicion of a rotator cuff tear. Ultrasound also incurs costs to the insurer (ACC) and the patient. We recommend x-rays and, if further imaging is indicated, High Tech Imaging with MRI and sometimes CT scans in these patients

Glenoid bone grafting in reverse total shoulder arthroplasty (RTSA) has emerged as an effective method of restoring bone stock in the presence of complex glenoid bone loss, yet there is limited published evidence on efficacy. The aim of this study was to conduct an analysis of clinical and radiographic outcomes associated with glenoid bone grafting in primary RTSA. Patients who underwent a primary RTSA with glenoid bone grafting were retrospectively identified from the databases of two senior shoulder surgeons. Inclusion criteria included minimum of 12 months clinical and/or radiographical follow up. Patients underwent preoperative clinical and radiographic assessment. Graft characteristics (source, type, preparation), range of movement (ROM), patient-reported outcome measures (Oxford Shoulder Scores [OSS]), and complications were recorded. Radiographic imaging was used to analyse implant stability, graft incorporation, and notching by two independent reviewers. Between 2013 and 2021, a total of 53 primary RTSA procedures (48 patients) with glenoid bone grafting were identified. Humeral head autograft was used in 51 (96%) of cases. Femoral head allograft was utilised in two cases. Depending on the morphology of glenoid bone loss, a combination of structural (corticocancellous) and non-structural (cancellous) grafts were used to restore glenoid bone stock and the joint line. All grafts were incorporated at review. The mean post-operative OSS was significantly higher than the pre-operative OSS (40 vs. 22, p < 0.001). ROM was significantly improved post-operatively. One patient is being investigated for residual activity-related shoulder pain. This patient also experienced scapular notching resulting in the fracturing of the inferior screw. One patient experienced recurrent dislocations but was not revised. Overall, at short term follow up, glenoid bone grafting was effective in addressing glenoid bone loss with excellent functional and clinical outcomes when used for complex bone loss in primary RTSA. The graft incorporation rate was high, with an associated low complication rate

The diagnosis of infection following shoulder arthroplasty is notoriously difficult. The prevalence of prosthetic shoulder infection after arthroplasty ranges from 3.9 – 15.4% and the most common infective organism is Cutibacterium acnes. Current preoperative diagnostic tests fail to provide a reliable means of diagnosis including WBC, ESR, CRP and joint aspiration. Fluoroscopic-guided percutaneous synovial biopsy (PSB) has previously been reported in the context of a pilot study and demonstrated promising results. The purpose of this study was to determine the diagnostic accuracy of percutaneous synovial biopsy compared with open culture results (gold standard). This was a multicenter prospective cohort study involving four sites and 98 patients who underwent revision shoulder arthroplasty. The cohort was 60% female with a mean age was 65 years (range 36-83 years). Enrollment occurred between June 2014 and November 2021. Pre-operative fluoroscopy-guided synovial biopsies were carried out by musculoskeletal radiologists prior to revision surgery. A minimum of five synovial capsular tissue biopsies were obtained from five separate regions in the shoulder. Revision shoulder arthroplasty was performed by fellowship-trained shoulder surgeons. Intraoperative tissue samples were taken from five regions of the joint capsule during revision surgery. Of 98 patients who underwent revision surgery, 71 patients underwent both the synovial biopsy and open biopsy at time of revision surgery. Nineteen percent had positive infection based on PSB, and 22% had confirmed culture positive infections based on intra-operative tissue sampling. The diagnostic accuracy of PSB compared with open biopsy results were as follows: sensitivity 0.37 (95%CI 0.13-0.61), specificity 0.81 (95%CI 0.7-0.91), positive predictive value 0.37 (95%CI 0.13 – 0.61), negative predictive value 0.81 (95%CI 0.70-0.91), positive likelihood ratio 1.98 and negative likelihood ratio 0.77. A patient with a positive pre-operative PSB undergoing revision surgery had an 37% probability of having true positive infection. A patient with a negative pre-operative PSB has an 81% chance of being infection-free. PSB appears to be of value mainly in ruling out the presence of peri-prosthetic infection. However, poor likelihood ratios suggest that other ancillary tests are required in the pre-operative workup of the potentially infected patient

INTRODUCTION. Determining proper joint tension in reverse total shoulder arthroplasty (rTSA) can be a challenging task for shoulder surgeons. Often, this is a subjective metric learned by feel during fellowship training with no real quantitative measures of what proper tension encompasses. Tension too high can potentially lead to scapular stress fractures and limitation of range of motion (ROM), whereas tension too low may lead to instability. New technologies that detect joint load intraoperatively create the opportunity to observe rTSA joint reaction forces in a clinical setting for the first time. The purpose of this study was to observe the differences in rTSA loads in cases that utilized two different humeral liner sizes. METHODS. Ten different surgeons performed a total of 37 rTSA cases with the same implant system. During the procedure, each surgeon reconstructed the rTSA implants to his or her own preferred tension. A wireless load sensing humeral liner trial (VERASENSE for Equinoxe, OrthoSensor, Dania Beach, FL) was used in lieu of a traditional plastic humeral liner trial to provide real-time load data to the operating surgeon during the procedure. Two humeral liner trial sizes were offered in 38mm and 42mm curvatures and were selected each case based on surgeon preference. To ensure consistent measurements between surgeons, a standardized ROM assessment consisting of four dynamic maneuvers (maximum internal to external rotation at 0°, 45°, and 90° of abduction, and a maximum flexion/extension maneuver) and three static maneuvers (arm overhead, across the body, and behind the back) was completed in each case. Deidentified load data in lbf was collected and sorted based on which size liner was selected. Differences in means for minimum and maximum load values for the four dynamic maneuvers and differences in means for the three static maneuvers were calculated using 2-tailed unpaired t-tests. RESULTS. No significant differences were observed for the flexion/extension maneuver between the 38mm and 42mm liner sizes, but a significant difference was observed for every internal/external rotation assessment at 0°, 45°, and 90° of abduction. No significant differences were observed for the across the body and overhead maneuvers, but a significant difference was observed for the behind the back maneuver (p = 0.015). Standard deviations were pronounced across all maneuvers. CONCLUSION. This study observed significant differences in intraoperative load values in rTSA when comparing different humeral liner sizes. Limitations of this study include the small sample sizes and large standard deviations observed, as well as comparing across multiple patients and multiple surgeons. Area for future work includes comparing load values with postoperative functional results and complication risks for short, midterm, and long-term outcomes in efforts to find the optimal load range for a given patient

Background. Degeneration of the shoulder joint is a frequent problem. There are two main types of shoulder degeneration: Osteoarthritis and cuff tear arthropathy (CTA) which is characterized by a large rotator cuff tear and progressive articular damage. It is largely unknown why only some patients with large rotator cuff tears develop CTA. In this project, we investigated CT data from ‘healthy’ persons and patients with CTA with the help of 3D imaging technology and statistical shape models (SSM). We tried to define a native scapular anatomy that predesignate patients to develop CTA. Methods. Statistical shape modeling and reconstruction:. A collection of 110 CT images from patients without glenohumeral arthropathy or large cuff tears was segmented and meshed uniformly to construct a SSM. Point-to-point correspondence between the shapes in the dataset was obtained using non-rigid template registration. Principal component analysis was used to obtain the mean shape and shape variation of the scapula model. Bias towards the template shape was minimized by repeating the non-rigid template registration with the resulting mean shape of the first iteration. Eighty-six CT images from patients with different severities of CTA were analyzed by an experienced shoulder surgeon and classified. CT images were segmented and inspected for signs of glenoid erosion. Remaining healthy parts of the eroded scapulae were partitioned and used as input of the iterative reconstruction algorithm. During an iteration of this algorithm, 30 shape components of the shape model are optimized and the reconstructed shape is aligned with the healthy parts. The algorithm stops when convergence is reached. Measurements. Automatic 3D measurements were performed for both the healthy and reconstructed shapes, including glenoid version, inclination, offset and critical shoulder angle. These measurements were manually performed on the mean shape of the shape model by a surgeon, after which the point-to-point correspondence was used to transfer the measurements to each shape. Results. The critical shoulder angle was found to be significantly larger for the CTA scapulae compared to the references (P<0.01). When analyzing the classified scapulae significant differences were found for the version angle in the scapulae of group 4a/4b and the critical shoulder angle of group 3 when compared to the references (P<0.05). Conclusion. Patients with CTA have a larger critical shoulder angle compared with reference patients. Some significant differences are found between the scapulae from patients in different stages of CTA and healthy references, however the differences are smaller than the accuracy of the SSM reconstruction. Therefore, we are unable to conclude that there is a predisposing anatomy in terms of glenoid version, inclination or offset for CTA

INTRODUCTION. Preoperative planning software for reverse total shoulder arthroplasty (RTSA) allows surgeons to virtually perform a reconstruction based off 3D models generated from CT scans of the glenohumeral joint. While anatomical studies have defined the range of normal values for glenoid version and inclination, there is no clear consensus on glenoid component selection and position for RTSA. The purpose of this study was to examine the distribution of chosen glenoid implant as a function of glenoid wear severity, and to evaluate the inter-surgeon variability of optimal glenoid component placement in RTSA. METHODS. CT scans from 45 patients with glenohumeral arthritis were planned by 8 fellowship trained shoulder arthroplasty specialists using a 3D preoperative planning software, planning each case for optimal implant selection and placement. The software provided four glenoid baseplate implant types: a standard non-augmented component, an 8° posterior augment wedged component, a 10° superior augment wedged component, and a combined 8° posterior and 10° superior wedged augment component. The software interface allowed the surgeons to control version, inclination, rotation, depth, anterior-posterior and superior-inferior position of the glenoid components in 1mm and 1° increments, which were recorded and compared for final implant position in each case. RESULTS. Two cases were excluded due to extreme deformity and consensus that a feasible RTSA may not be possible. For resultant implant version, a bimodal distribution was observed with a local maxima occurring at 0°, and a bell-shaped distribution at −5° of version. Upon individual surgeon analysis, it was revealed that certain surgeons had a preference to correct to 0 degrees, whereas others were more accepting of residual version. As well, the surgeons accepting residual retroversion removed less bone on average per implant type than the surgeons who aimed to correct to 0°. For resultant implant inclination, surgeons consistently tried to plan for 0 degrees of inclination. CONCLUSION. This study indicates that while there was limited consensus on the optimal reconstruction in any one case, there appear to be thresholds of retroversion and inclination that favor the use of augmented glenoid components based on frequency of selection. Our results indicate a wide variability in terms of what experienced shoulder surgeons consider to be an optimal reconstruction despite the common goal of attempting to restore anatomy, maximize implant fixation in bone and minimize bone removal. High frequency of augmented glenoid component use raises questions about how much retroversion and inclination is optimal and whether this technology allows surgeons to potentially focus more on a quantitative reconstruction relative to the Friedman axis versus a qualitative implant placement relative to what may be normal anatomy for a patient

Introduction. The Walch Type B2 glenoid has the hallmark features of posteroinferior glenoid erosion, retroversion, and posterior humeral head subluxation. Although our understanding of the pathoanatomy of bone loss and its evolution in Type B's has improved, the etiology remains unclear. Furthermore, the morphology of the humerus in Walch B types has not been studied. The purpose of this imaging based anthropometric study was to examine the humeral torsion in Walch Type B2 shoulders. We hypothesized that there would be a compensatory decrease in humeral retroversion in Walch B2 glenoids. Methods. Three-dimensional models of the full length humerus were generated from computed tomography data of normal cadaveric (n = 59) and Walch Type B shoulders (n = 59). An anatomical coordinate system referencing the medial and lateral epicondyles was created for each model. A simulated humeral head osteotomy plane was created and used to determine humeral version relative to the epicondylar axis and the head-neck angle. Measurements were repeated by two experienced fellowship-trained shoulder surgeons to determine inter-rater reliability. Glenoid parameters (version, inclination and 2D critical shoulder angle) and posterior humeral head subluxation were calculated in the Type B group to determine the pathologic glenohumeral relationship. Two-way ANOVAs compared group and sex within humeral version and head-neck angle, and intra-class correlation coefficients (ICCs) with a 2-way random effects model and absolute agreement were used for inter-rater reliability. Results. There were statistically significant differences in humeral version between normal and Type B shoulders (p < .001) and between males and females within the normal group (p = .043). Normal shoulders had a humeral retroversion of 36±12°, while the Walch Type B group had a humeral retroversion of 14±9° relative to the epicondylar axis. For head-neck angle, there were no significant differences between sexes (p = .854), or between normal and Type B shoulders when grouped by sex (p = .433). In the Type B group, the mean glenoid version was 22±7°, glenoid inclination was 8±6°, 2D critical shoulder angle was 30±5° and humeral head subluxation was 80±9%. Inter-rater reliability showed fair agreement between the two experienced observers for head-neck angle (ICC = .562; 95% CI: -.28 to .809) and excellent agreement for humeral version (ICC = .962;.913 to .983). Although only fair agreement was found between observers in head-neck angle ICC, the difference in mean angle was only 2°. Discussion. Although much time and effort has been spent understanding and managing Type B2 glenoids, little attention has been paid to investigating associated humeral contributions to the Type B shoulder. Our results indicate that the humeral retroversion in Type B shoulders is significantly lower than in normals. These findings have several implications, including, helping to understanding the etiology of the B2, the unknown effects of arbitrarily selecting higher version angles for the humeral component, and the unknown effects of altered version on glenohumeral joint stability, loading and implant survivorship post-arthroplasty. Our results also raise an important question, whether it is best to reconstruct Type B humeral component version to pathologic version or to non-pathologic population means

A variety of challenging shoulder pathology will be presented to a panel of expert shoulder surgeons for their diagnostic evaluation, decision making, surgical management and aftercare. They will discuss the decision making processes and management options to consider in striving to obtain optimal outcomes

Practice variation may occur when there is no standardised approach to specific clinical problems and there is a lack of scientific evidence for alternative treatments. Practice variation suggests that a segment of the patient population may be managed sub-optimally, and indicates a need for further research in order to establish stronger evidence-based practice guidelines. We surveyed Australian orthopaedic surgeons to examine practice variation in common orthopaedic presentations. In February 2009, members of the Australian Orthopaedic Association were emailed an online survey, which collected information regarding experience level (number of years as a consultant), sub-specialty interests, state where the surgeon works, on- call participation, as well as five common (anecdotally controversial) orthopaedic trauma cases with a number of management options. Surgeons were asked to choose their one most likely management choice from the list provided, which was either surgical or non-surgical in nature. A reminder was sent two weeks later. Exploratory regression was modeled to examine the predictors of choosing surgical management for each case and overall. Of 760 surgeons, 358 (47%) provided responses. For undisplaced scaphoid fractures, respondents selected short-arm cast (53%), ORIF (22%), percutaneous screw (22%) and long-arm cast (3%). Less experienced (0 to 5 years) (p=0.006) and hand surgeons (p=0.008) were more likely to operate. For a displaced mid-shaft clavicle fracture, respondents selected non-operative (62%), plating (31%) and intramedullary fixation (7%). Shoulder surgeons were more likely to operate (p<0.001). For an undisplaced Weber B lateral malleolus fracture, respondents selected plaster cast or boot (59%), lateral plating (31%), posterior plating (9%) and no splinting (2%). For a displaced Colles fracture in an older patient, respondents selected plating (47%), Kirschner wires (28%), cast/splint (23%) and external fixation (1%). Less experienced (p<0.001) and hand surgeons (p=0.024) were more likely to operate. For a two-part neck of humerus fracture in an older patient, respondents selected non-operative (74%), locking plate (14%), and hemiarthroplasty (7%). Shoulder surgeons were more likely to operate (p<0.001). Accounting for all answers in multiple regression modeling, it was found that more experienced surgeons (>15 years) were 25% less likely to operate (p=0.001). Overall, there was no difference among sub-specialties, or whether a surgeon participated in an on-call roster. Considerable practice variation exists among orthopaedic surgeons in the approach to common orthopaedic problems. Surgeons who identify with a sub-specialty are more likely to manage conditions in their area of interest operatively, and more experienced surgeons are less likely to recommend surgical management

Management of 4-part fractures of the proximal humerus continues to challenge orthopaedic surgeons, shoulder surgeons, and trauma surgeons. Truly displaced 4-part fractures typically require surgery if the patient is medically able to undergo a surgical procedure. However, outcomes following surgery are not always as predictable as we would like. Results following hemiarthroplasty have led to more predictable pain relief than predictable functional recovery relying exclusively on the fate of tuberosity healing. Tuberosity healing failure leads to nearly universal catastrophic results with pain, dysfunction, and pseudoparalysis. Furthermore, conversion of failed hemiarthroplasty to reverse total shoulder arthroplasty leads to the highest incidence of complications and poorest outcomes of all groups of patients undergoing reverse total shoulder replacement. This is countered by the knowledge that if tuberosity healing occurs the outcome can be reliable with regard to pain relief and functional restoration. Reverse total shoulder arthroplasty, on the other hand, has emerged as a preferred surgical option for many surgeons due to the issues following hemiarthroplasty. The increased prevalence of RTSA for the management of 4-part fractures has come without overwhelming evidence that outcomes are superior especially in light of the increased cost, life-time weight bearing restrictions, and uncertain long-term durability. Long-term follow-up of patients treated with RTSA for 4-part fracture has shown concerning degradation of function and outcomes and remains a valid concern about the long-term durability. We must remain diligent therefore in continuing to better understand which fractures should be treated non-operatively and those that may be amenable to anatomic hemiarthroplasty and finally those which may be better served by using a reverse total shoulder replacement

Aseptic loosening of the glenoid after total shoulder replacement is a challenging problem to manage clinically. In the right circumstances, arthroscopic retrieval of loose polyethylene glenoids can be a valuable tool in the shoulder surgeon's repertoire for dealing with this uncommon problem. The purpose of this talk is to demonstrate the technique for arthroscopic removal of a loose glenoid and review the clinical circumstances where this procedure may play a valuable role

The purpose of this study was to examine five-year outcomes of patients previously enrolled in a non-operative rotator cuff study. Patients with chronic, full-thickness rotator cuff tears (demonstrated on imaging) who were referred to one of two senior shoulder surgeons were enrolled in the study between October 2008 and September 2010. Patients participated in a comprehensive non-operative, home-based treatment program. After three months patients were defined as “successful” or “failed”. “Successful” patients were essentially asymptomatic and did not require surgery. “Failed” patients were symptomatic and consented to surgical repair. All patients were followed up at one year, two years, and five-plus years. Original results of our study showed that 75% of patients were treated successfully with non-operative treatment, while 25% went on to surgery. These numbers were maintained at two-year follow-up (previously reported) and five-year follow-up. At five+ years, 88 patients were contacted for follow-up. Fifty-eight (66%) responded. The non-operative success group had a mean RC-QOL score of 80 (SD 18) at previously reported two-year follow-up. At five-year follow-up this score did not decrease (RCQOL = 82 (SD 16)). Furthermore, between two and five years, only two patients who had previously been defined as “successful” became more symptomatic and underwent surgical rotator cuff repair. From the original cohort of patients, those who failed non-operative treatment and underwent surgical repair had a mean RC-QOL score of 89 (SD 12) at five-year follow-up. The operative and non-operative groups at five-year follow-up were not significantly different (p = 0.07). Non-operative treatment is an effective and lasting option for many patients with a chronic, full-thickness rotator cuff tear. While some may argue that non-operative treatment delays inevitable surgical fixation, our study shows that patients can do extremely well over time

Introduction. Shoulder arthroplasty is used to treat several common pathologies of the shoulder, including osteoarthritis, post-traumatic arthritis, and avascular necrosis. In replacement of the humeral head, modular components allow for anatomical variations, including retroversion angle and head-neck angle. Surgical options include an anatomic cut or a guide-assisted cut at a fixed retroversion and head-neck angle, which can vary the dimensions of the cut humeral head (height, anteroposterior (AP), and superoinferior (SI) diameters) and lead to negative long term clinical results. This study measures the effect of guide-assisted osteotomies on humeral head dimensions compared to anatomic dimensions. Methods. Computed tomography (CT) scans from 20 cadaveric shoulder specimens (10 male, 10 female; 10 left) were converted to three-dimensional models using medical imaging software. An anatomic humeral head cut plane was placed at the anatomic head – neck junction of all shoulders by a fellowship trained shoulder surgeon. Cut planes were generated for each of the standard implant head-neck angles (125°, 130°, 135°, and 140°) and retroversion angles (20°, 30°, and 40°) in commercial cutting guides. Each cut plane was positioned to favour the anterior humeral head-neck junction while preserving the posterior cuff insertion. The humeral head height and diameter were measured in both the AP plane and the SI plane for the anatomic and guide-assisted osteotomy planes. Differences were compared using separate two-way repeated measures ANOVA for each dependent variable and deviations were shown using box plot and whisker diagrams. Results. Guide-assisted cuts tend to be smaller than the anatomic humeral head dimensions. Retroversion angle showed a significant effect on head height, AP, and SI diameters (p=0.002). The effect of head-neck angle was only significant for SI diameter (p<0.001). The largest dimensional deviation was observed at 20 degrees of retroversion and resulted in a 2.5mm decrease in humeral head height, averaged over the range of head-neck values. Conclusion. Where patient's natural anatomy falls outside the range of commercial cutting guides, resection according to the template may result in a deviation from the natural dimensions of the humeral head, which impacts the sizing of the implant head component. This has implications for both manufacturers to create a template that has a larger range of retroversion angles, as well as surgeons' choices in intra-operative planning

We wished to assess the usefulness of Inspace balloon arthroplasty (IBA), in our Upper limb unit by regular patient reviews prospectively. This prospective study was started adhering to local approval process. Patients were identified in routine clinical practice by three upper limb consultants presenting with pain and disability and diagnosis of cuff tear was established clinically and on MRI. The patients were explained of ‘available’ treatment options and an information leaflet about balloon arthroplasty provided. Patients were seen in 4 weeks, in a dedicated clinic to find out their willingness to participate. Consultant shoulder surgeons carried out all Balloon arthroplasties and where the cuff was reparable or contraindications identified were excluded from study. All the patients were reviewed by an independent clinician pre-operatively and post operatively using the assessment tools of Oxford Shoulder Scores (OSS), SF12 and VAS at 6 weeks, followed by 3, 6, 12 months and annually after. We performed a total of 32 IBA procedures. At the latest follow-up we identified that 24 patients have completed 2 years post procedure. Of these patients 1 deceased after 6 months, 3 were lost to follow up one each at 6, 12 and 24 months. Three were revised to reverse TSA. The OSS reflects that the positive difference of 10 in the average scores (24 pre-operative versus 34 at 2 years) noted at one year follow up were maintained at 2 years. Similar observations made analysing at 12 months and 2 years scores for the VAS pain scores of 3 at 2 years compared to pre-operative score of 6 and so were improvements in both physical & mental components of SF12. Our study observes that the IBA provides a sustainable pain relief and functional improvements over 2 years and may be a suitable alternative in physiologically compromised patients with irreparable RCT

Aim. To determine the benefit of dissolvable Balloon Arthroplasy in managing patients with massive irreparable rotator cuff tears (RCT). Methods. This is prospective pilot study carried out adhering to the local approval process. Patients having massive cuff tear with pain or functional limitation were seen by consultants and MRI confirmed the diagnosis. The patients were explained of ‘all available’ treatment options and information leaflet about the new procedure balloon arthroplasty, provided. Patients were seen after 4 weeks in a dedicated clinic to find out if they were willing to participate. Patients were seen by a physiotherapist pre and post-operatively at 6 weeks then at 3, 6 and 12months in addition to medical follow-ups, using VAS, Oxford Shoulder, Constant and SF36 scores. All procedures were carried out by consultant shoulder surgeons and where the cuff was reparable or contraindications identified were excluded. Results. Of the 25 recruited 4 were lost for follow up. 17 of the remaining 21 completed 12 month follow up, and the remaining completed their 6 month follow up. Male to female ratio was 2:1 and no surgical complications were noted. Two patients required an inverse shoulder arthroplasty. Improvements were noted in the SF36, VAS and OSS. Conclusion. The balloon arthroplasty seems to offer benefit for a group of patients who are unfit or not keen on major surgery to offer pain relief possibly function. Recommendations cannot be made due to the study but suggest a multicentre study

Background. Humeral version is the twist angle of the humeral head relative to the distal humerus. Pre-operatively, it is most commonly measured referencing the transepicondylar axis, although various techniques are described in literature (Matsumura et al. 2014, Edelson 1999, Boileau et al., 2008). Accurate estimation of the version angle is important for humeral head osteotomy in preparation for shoulder arthroplasty, as deviations from native version can result in prosthesis malalignment. Most humeral head osteotomy guides instruct the surgeon to reference the ulnar axis with the elbow flexed at 90°. Average version values have been reported at 17.6° relative to the transepicondylar axis and 28.8° relative to the ulnar axis (Hernigou, Duparc, and Hernigou 2014), although it is highly variable and has been reported to range from 10° to 55° (Pearl and Volk 1999). These studies used 2D CT images; however, 2D has been shown to be unreliable for many glenohumeral measurements (Terrier 2015, Jacxsens 2015, Budge 2011). Three-dimensional (3D) modeling is now widely available and may improve the accuracy of version measurements. This study evaluated the effects of sex and measurement system on 3D version measurements made using the transepicondylar and ulnar axis methods, and additionally a flexion-extension axis commonly used in biomechanics. Methods. Computed tomography (CT) scans of 51 cadaveric shoulders (26 male, 25 female; 32 left) were converted to 3D models using medical imaging software. The ulna was reduced to 90° flexion to replicate the arm position during intra-operative version measurement. Geometry was extracted to determine landmarks and co-ordinate systems for the humeral long axis, epicondylar axis, flexion-extension axis (centered through the capitellum and trochlear groove), and ulnar long axis. An anatomic humeral head cut plane was placed at the head-neck junction of all shoulders by a fellowship trained shoulder surgeon. Retroversion was measured with custom Matlab code that analysed the humeral head cut plane relative to a reference system based on the long axis of the humerus and each elbow axis. Effects of measurement systems were analyzed using separate 1-way RM ANOVAs for males and females. Sex differences were analyzed using unpaired t-tests for each measurement system. Results. Changing the measurement reference significantly affected version (p<0.001). The ulnar axis method consistently resulted in higher measured version than either flexion-extension axis (males 9±1°, females 14±1°, p<0.001) or epicondylar axis (males 8±1°, females 12±1°, p<0.001). See Figure 1. Version in males (38±11°) was 7° greater than females (31±12°) when referencing the flexion-extension axis (p=0.048). Conclusion. Different measurement systems produce different values of version. This is important for humeral osteotomies; if version is assessed using the epicondyles pre-operatively and subsequently by the ulna intra-operatively, then the osteotomy will be approximately 10° over-retroverted. For any figures or tables, please contact authors directly (see Info & Metrics tab above).