First rib fractures (FRFs) have historically been a marker for severe trauma and poor outcomes. The aim of this study was to assess whether an association still exists between a fractured first rib and global trauma scores suffered by the patient, examine mortality rate and identify other commonly associated injuries. This study examined patients who presented to the Rockhampton Hospital with a traumatic FRF between the dates of July 2015 to June 2020. Patient demographics, mortality rate and additional injuries sustained by the patients were collected. The Injury Severity Score (ISS) was utilised and calculated for each patient. Analysis was conducted to determine associations between trauma scores and FRFs, mortality rate and other injuries sustained at the time of rib fracture. In total, 545 patients had a rib fracture with 48 patients identified as having an FRF. Median age was 50 years. Thirty-seven (77%) were male. The most common mechanism of FRF was motor vehicle/motorbike accidents (71%). Fifty percent of patients with an observed FRF had the highest global ISS of very severe, with 13% severe, 22% moderate and 15% mild. No patients died from their injuries. Of those with an FRF, 79% experienced fractures other than ribs, 75% had other rib fractures and 52% had chest injuries. A larger than expected proportion of FRFs were not associated with severe trauma scores or high mortality. These findings suggest that patients with an FRF may have a greater chance of surviving their traumatic FRF than previously reported. Clinicians should be aware of the potential for severity and other associated injuries, such as chest wall fractures and thoracic injuries, when treating a patient with a fracture of their first rib

Abstract. Purpose. Intracanal rib head penetration is a well-known entity in dystrophic scoliotic curves in neurofibromatosis type 1. There is potential for spinal cord injury if this is not recognised and managed appropriately. No current CT-based classification system is currently in use to quantify rib head penetration. This study aims to propose and evaluate a novel CT-based classification for rib head penetration primarily for neurofibromatosis but which can also be utilised in other conditions of rib head penetration. Materials and methods. The grading was developed as four grades: normal rib head (RH) position—Grade 0, subluxed ext-racanal RH position—Grade 1, RH at pedicle—Grade 2, intracanal RH—Grade 3. Grade 3 was further classified depending on the head position in the canal divided into thirds. Rib head penetration into proximal third (from ipsilateral side)—Grade 3A, into the middle third—Grade 3B and into the distal third—Grade 3C. Seventy-five axial CT images of Neurofibromatosis Type 1 patients in the paediatric age group were reviewed by a radiologist and a spinal surgeon independently to assess interobserver and intraobserver agreement of the novel CT classification. Agreement analysis was performed using the weighted Kappa statistic. Results. There was substantial interobserver correlation with mean Kappa score (k = 0.8, 95% CI 0.7–0.9) and near perfect intraobserver Kappa of 1.0 (95% CI 0.9–1.0) and 0.9 (95% CI 0.9–1.0) for the two readers. Conclusion. The novel CT-based classification quantifies rib head penetration which aids in management planning

Flail chest and multiple rib fractures are common injuries in trauma patients. Several small randomized studies have suggested significant improvements in patient outcomes with surgical fixation, compared to nonoperative management, yet emerging population-level data report some conflicting results. The objectives of this study were to compare the results of surgical fixation and nonoperative management of multiple rib fractures and flail chest injuries and to assess whether effects varied by study design limitations, including risk of confounding by indication. A comprehensive search of electronic databases (Medline, Embase, Web of Science) was performed to identify randomized controlled trials and observational studies. Random effects models were used to evaluate weighted risk ratios (RR) and mean differences (MD). Risk of confounding by indication was assessed for each study (low, medium, and high risk), and this categorization was used to stratify results for clinical outcomes. Publication bias was assessed. Thirty-nine studies, with a total of 19,357 patients met inclusion criteria. Compared to nonoperative treatment, surgical fixation of flail chest and multiple rib fractures was associated with decreased risk of death (overall RR 0.40, 95% confidence interval (CI) 0.28–0.56), pneumonia (overall RR 0.70, 95% CI 0.52–0.93), tracheostomy (overall RR 0.62, 95% CI 0.41–0.93), and chest wall deformity (overall RR 0.16, 95% CI 0.06–0.42). However, many of the observational studies were at risk of confounding by indication, and results varied according to risk of confounding by indication. Differences in ventilator time, intensive care unit length of stay (LOS), hospital LOS, and return to work will be assessed (results pending). Compared to nonoperative treatment, surgical fixation of flail chest and multiple rib fractures is associated with improved clinical outcomes. Discrepancies between some study results may be due to confounding by indication. Additional prospective randomized trials and high-quality observational studies are required to overcome potential threats to validity and to expand on existing evidence around optimal treatment of these injuries

High energy chest trauma resulting in flail chest injury is associated with increased rates of patient morbidity. Operative fixation of acute rib fractures is thought to reduce morbidity by reducing pain and improving chest mechanics enabling earlier ventilator weaning. A variety of operative techniques have been described and we report on our unit's experience of acute rib fracture fixation. Over 18 months, 10 patients have undergone acute rib fracture fixation. Outcome measures included; patient demographics, time ventilated pre-operatively, time ventilated post-operatively and time spent on ITU/HDU post operatively. The mean time from presentation to surgery was 5 days (range 2–12 days). The mean time ventilated post operatively was 2 days (range 1–4 days) and the mean number of days spent on ITU/HDU post-operatively was 6 days (range 2–11 days). Our results appear positive in terms of time spent ventilated post-operatively but no conclusion can be drawn as we have no comparable non-operative group. We have however shown, that rib fracture fixation can be carried out successfully and safely in a trauma centre. Further evidence on rib fracture fixation is required from a large, multi-centre randomised controlled trial

To evaluate the efficacy of VEPTR in preventing further progression of scoliosis without impeding spinal growth in the treatment of children with progressive early onset scoliosis (EOS) without rib abnormalities. Prospective, multi-center, observational cohort study on patients with EOS treated with VEPTR with 2-year follow up. Data were analysed based on measurements done pre-implant, immediate post-op and at 2-yr f/u. Sixty-three patients met inclusion: 35 males and 28 females. Mean age at time of implantation was 6.1±2.4 yrs. Etiologies included congenital (n=6), neuromuscular (n=36), syndromic (n=4), and idiopathic (n=17). Mean follow up was 2.2±0.4 yrs. Scoliosis (72o±18o) decreased after implant surgery (47o±17o) followed by slight increase at 2-yr f/u (57o±18o), p<0.0001. At 2-yr f/u, VEPTR was effective in treating EOS without rib abnormalities with 86% of patients having an improvement in scoliosis and 94% of patients having an increased spinal height as compared to pre-operatively. VEPTR provided greater than 100% of expected age-matched spine growth and the instrumented spinal segment continued to grow during distraction phase. This large prospective, multicentre study demonstrated the ability of VEPTER to effectively treat EOS without rib abnormalities. Goals of preventing further scoliosis progression and of maintaining normal spine growth were achieved

Subjects. A prospective study of 127 patients who underwent posterior spinal arthrodesis and segmental spinal instrumentation with iliac crest bone graft for correction of adolescent idiopathic scoliosis. Patients were divided according to their Cobb angle into two groups. Group 1 (n= 78) with a Cobb angle > 70° who underwent an additional concave rib osteotomy (CRO) and group 2 (n= 49) with a Cobb angle < 70° who did not (NCRO). All patients received a pulmonary rehabilitation programme post-operatively. Vital capacity (VC) and peak expiratory flow rate (PEF) were measured pre-operatively, at 3 months and 12 months post-operatively. Summary of background data. Concave rib osteotomy technique is used for giving more mobility and flexibility of the spine during correction especially in rigid and severe curves. Only a few studies in the literature have looked at the effect of concave rib osteotomy on pulmonary function. Results. ∗Curve correction: the mean Cobb angles at the pre-operative and final follow-up for group 1 (CRO) were 82.2° and 10.9° respectively (87% correction). In group 2 (NCRO), the mean Cobb angle was 62.77% pre-operatively and 6.9% at the final follow-up (89% correction achieved). ∗Pulmonary function: Pre-operative: there was no significant difference between the 2 groups. 3 Months post-operative: the mean VC was 40.4% in group 1 and 48.05% in group 2 (p=0.05). The mean PEF was 27.38 % in group 1and 34.1% in group 2 (p = 0.02). 12 Months post-operative: the mean VC in group 1 was 102.4% versus 103.5% in group 2 (p = 0.43). The mean PEF in group 1 was 76.2% versus 73.5% in group 2 (p = 0.32). Conclusions. Concave Rib Osteotomy technique has a definite effect on the pulmonary function in the early post-operative period. However, this difference resolves with time and both groups had a similar outcome a year post-operatively

Unstable chest wall injuries have high rates of mortality and morbidity. These injuries can lead to respiratory dysfunction, and are associated with high rates of pneumonia, sepsis, prolonged ICU stays, and increased health care costs. Numerous studies have demonstrated improved outcomes with surgical fixation compared to non-operative treatment. However, an adequately powered multi-centre randomized controlled study using modern fixation techniques has been lacking. We present a multi-centred, prospective, randomized controlled trial comparing surgical fixation of acute, unstable chest wall injuries with the current standard of non-operative management. Patients aged 16–85 with a flail chest (3 or more consecutive, segmental, displaced rib fractures), or severe deformity of the chest wall, were recruited from multiple trauma centers across North America. Exclusion criteria included: severe pulmonary contusion, severe head trauma, randomization>72 hours from injury, inability to perform surgical fixation within 96 hours from injury (in those randomized to surgery), fractures of the floating ribs, or fractures adjacent to the spine not amendable to surgical fixation. Patients were seen in follow-up for one year. The primary outcome was days free from mechanical ventilation in the first 28 days following injury. Secondary outcomes were days in ICU, rates of pneumonia, sepsis, need for tracheostomy, mortality, general health outcomes, pulmonary function testing, and other complications of treatment. A sample size of 206 was required to detect a difference of 2 ventilator-free days between the two groups, using a 2-tailed alpha error of 0.05 and a power of 0.80. A total of 207 patients were recruited from 15 sites across Canada and USA, from 2011–2018. Ninety-nine patients were randomized to non-operative treatment, and 108 were randomized to surgical fixation. Overall, the mean age was 53 years, and 75% of patients were male, with 25% females. The commonest mechanisms of injury were: motor vehicle collisions (34%), falls (20%), motorcycle collisions (14%), and pedestrian injuries (11%). The mean injury severity score (ISS) at admission was 26, and patients had a mean of 10 rib fractures. Eighty-nine percent of patients had pneumothorax, 76% had haemothorax, and 54% had pulmonary contusion. There were no differences between the two groups in terms of demographics. The final results will be available and presented at the COA meeting in Halifax. This is the largest randomized controlled trial to date, comparing surgical fixation to non-operative treatment of unstable chest wall and flail chest injuries. The results of this study will shed light on the best treatment options for patients with such injuries, help understand outcomes, and guide treatment. The final results will be available and presented at the COA meeting in Halifax

Australian Football (AF) is a popular sport in Australia, with females now representing one-third of participants. Despite this, the injury profiles of females versus males in largely unknown. The current study investigated fractures, dislocations and tendon ruptures in females versus males presenting to emergency departments (ED) with an AF injury. All patients, regardless of age, presenting to one of 10 EDs in Victoria, Australia, with an AF injury were included. Data were prospectively collected over a 10-month period, coinciding with a complete AF season. Data were extracted from patient medical records regarding injury-type, body-part injured and treatments required. Female and male data were compared with chi-squared tests. Of the 1635 patients presenting with an AF injury, 595 (36.0%) had a fracture, dislocation or tendon rupture, of whom 85 (14.3%) were female and the average age was 20.5 years (SD 8.0). Fractures accounted for most injuries (n=478, 80.3% of patients had a fracture), followed by dislocations (n=118, 19.8%) and tendon ruptures (n=14, 2.4%). Upper limb fractures were more common than lower limb fractures (71.1% v 11.5% of fractures). Females were more likely to fracture their hands or fingers than males (45.7% v 34.3%). Males were more likely to fracture ribs (5.4% v 0%). Most fractures (91.2%) were managed in the ED, with the remainder being admitted for surgery (GAMP/ORIF). Males were more likely to be admitted for surgery than females (11.2% v 5.9%). Regarding dislocations (n=118), females were more likely to dislocate the patella (36.8% v 8.1% of dislocations). Only males sustained a tendon rupture (n=14): finger extensor or flexor (57.1%), achilles tendon (28.6%) and patella tendon (14.3%). Orthopaedic AF injuries are common presentations to EDs in Victoria, though few require specialist orthopaedic intervention. Injury profiles differed between genders suggesting that gender specific injury prevention and management might be required

There has been a substantial increase in the surgical treatment of unstable chest wall injuries recently. While a variety of fixation methods exist, most surgeons have used plate and screw fixation. Rib-specific locking plate systems are available, however evidence supporting their use over less-expensive, conventional plate systems (such as pelvic reconstruction plates) is lacking. We sought to address this by comparing outcomes between locking plates and non-locking plates in a cohort of patients from a prior randomized trial who received surgical stabilization of their unstable chest wall injury. We used data from the surgical group of a previous multi-centred, prospective, randomized controlled trial comparing surgical fixation of acute, unstable chest wall injuries to non-operative management. In this substudy, our primary outcome was hardware-related complications and re-operation. Secondary outcomes included ventilator free days (VFDs) in the first 28 days following injury, length of ICU and hospital stay, and general health outcomes (SF-36 Physical Component Summary (PCS) and Mental Component Summary (MCS) scores). Categorical variables are reported as frequency counts and percentages and the two groups were compared using Fisher's Exact test. Continuous data are reported as median and interquartile range and the two groups were compared using the Wilcoxon rank-sum test. From the original cohort of 207 patients, 108 had been treated surgically and had data available on the type of plate construct used. Fifty-nine patients (55%) had received fixation with non-locking plates (primarily 3.5 or 2.7 mm pelvic reconstruction plates) and 49 (45%) had received fixation with locking plates (primarily rib-specific locking plates). The two groups were similar in regard to baseline and injury characteristics. In the non-locking group, 15% of patients (9/59) had evidence of hardware loosening versus 4% (2/49 patients) in the locking group (p = 0.1). The rate of re-operation for hardware complications was 3% in the non-locking group versus 0% in the locking group (p = 0.5). No patients in either group required revision fixation for loss of reduction or nonunion. There were no differences between the groups with regard to VFDs (26.3 [19.6 – 28] vs. 27.3 [18.3 – 28], p = 0.83), length of ICU stay (6.5 [2.0 – 13.1] vs 4.1 [0 – 11], p = 0.12), length of hospital stay (17 [10 – 32] vs. 17 [10 – 24], p = 0.94) or SF-36 PCS (40.9 [33.6 – 51.0] vs 43.4 [34.1 – 49.6], p = 0.93) or MCS scores (47.8 [36.9 – 57.9] vs 46.9 [40.5 – 57.4], p = 0.95). We found no statistically significant differences in outcomes between patients who received surgical stabilization of their unstable chest wall injury when comparing non-locking plates versus locking plates. However, the rate of hardware loosening was nearly 4 times higher in the non-locking plate group and trended towards statistical significance, although re-operation related to this was less frequent. This finding is not surprising, given the inherent challenges of rib fixation including thin bones, comminution, potential osteopenia and a post-operative environment of constant motion. We believe that the increased cost of locking plate fixation in this setting is likely justifiable given these findings

Abstract. In the pediatric population, scoliosis is classified into congenital, syndromic, idiopathic, and neuromuscular in aetiology. Syndromic scoliosis represents a wide range of systemic anomalies associated with scoliosis. The primary challenge for a clinician is to think beyond the scoliotic curve, as the underlying pathology is multisystemic. The aim of this review is to identify the systemic anomalies, associated with syndromic scoliosis. MEDLINE, EMBASE, and CINAHL databases were searched, dating from 1990–2020, relevant to the purpose of our study. Keywords used: “scoliosis”+ “syndrome” + “genetic”. Retrospective, prospective studies were included. Case reports that had fewer than 4 patients were not included. Delineating 60 articles, we found a total of 41 syndromes to be associated with scoliosis. Thoracic region was the most common level of scoliosis curve, being noted in 28 syndromes. Mental retardation, seizures, and ataxia were the commonly noticed CNS anomalies. VSD, ASD, and TGA were the anomalies associated with CVS; Hypotonia, rib and vertebral malformations were the most identified neuromuscular anomalies; pulmonary hypoplasia, renal agenesis, and strabismus were other associations. A multidisciplinary approach, involving spinal surgeons, paediatricians, geneticists, anesthesiologists, and allied health professionals, is vital for the best care of patients with syndromic scoliosis. The location of the scoliotic curve reflects the associated anomalies, as thoracic curvature is more closely linked with cardiac anomalies, while lumbosacral curvature is seen to be often linked with genitourinary anomalies. We hope that this article provides a clear overview of the systemic associations in syndromic scoliosis and thus, facilitates and streamlines the management protocol

The purpose of this study was to determine if the use of a new 4 Dimensional CT scan aids the clinician in defining the size and area of the scapular bone to be removed arthroscopically in patients with Snapping Scapular Syndrome. From January 2009 – January 2011 nine consecutive patients with Snapping Scapular Syndrome were included. In six patients, (mean age 21±5 years, range 15–27) conservative treatment failed. These patients were positioned prone and demonstrated their snapping motion during the 7 seconds duration of the scan. The 4D CT machine scans 16 cm volumes in 0.3 seconds. It also scans motion, allowing a 3D reconstruction of the scapulothoracic joint, its’ movements and the dynamic area of impingement of the scapula on the surrounding structures. This scan has already improved arthroscopic removal of the supero-medial angle of the scapula. The scan showed in one case not only snapping of the superior medial angle of the scapula on the 2nd rib, but also extra bone impinging on the 3rd rib. Another case showed no real impingement but movement of the 2nd and 3rd rib by a tethering structure and a third case demonstrated impingement of the lateral third of the clavicle on the 2nd rib. The images provided by this new 4D CT scan offer greater pre-operative insight on the pathology in each individual patient with Snapping Scapular Syndrome. Therefore, we feel that it is a valuable addition to the assessment and treatment of these patients

Introduction. Originally, the vertical expandable titanium rib (VEPTR™) was developed to treat children with Thoracic insufficiency syndrome secondary to fused ribs and congenital scoliosis. Over the years its usage has widen and is currently being used to treat all etiology of early onset scoliosis (EOS). A major draw back remains the size of the titanium VEPTR™ implant. In keeping with the new trend of chrome-cobalt alloy (CoCr). spinal implants, we set out to explore if redesigning the VEPTR™ was mechanically sound. The aim of this study was twofold. Firstly, we investigate the mechanical properties of a VEPTR™ made with CoCr alloy compared to that of titanium alloy. Secondly we investigated how much we could down size the VEPTR™. Materials & Methods. Finite element analyses were performed on 3 different VEPTR™ designs (rod diameter of 6mm, 5mm and 4mm) subjected to a compressive load of 500N (equivalent to a 50Kg child). For each configuration, two materials, titanium alloy and chrome-cobalt alloy, were used. Maximum Von Mises stress distribution (VMSD), plastic strain (PS) and total displacement (TD) of the VEPTR™ were measured as indicators of mechanical properties of the implant. Results. Results for the maximum Von Mises stress distribution (VMSD), plastic strain and total displacement (TD) can be seen on the table 1. Discussion. Results confirm that yield strength of titanium material is greater than that of Co-Cr, while Plastic strain (PS) is greater for a CoCr VEPTR™ than for titanium VEPTR™. As expected a 6 mm CoCr VEPTR resist displacement almost twice as a 6 mm titanium VEPTR. Little difference is noted in plastic strain and VonMises stress at 6mm. Down sizing the implant to 5 mm in titanium or CoCr may runs the risk of implant failure as both exceeds their failure point and they both deform 0.29% and 6.6% respectively, placing the 5mm CoCr at higher risk of failure. Our results suggest that the VEPTR™ design could be reduced to 5mm however requires a new design to minimize the risk of failure. 4mm rods will not withstand a 50kg load

Objectives. Surgical treatment is standard for advanced osteochondritis dissecans (OCD) of the humeral capitellum. When cartilage is seen to be separated or completely detached, this fragment fixation is not usually applied. There have been reports of cases in which advanced OCD of the humeral capitellum progressed to osteoarthritis (Fig), particularly in cases which involved the lateral wall. In these cases, every attempt should be made to reconstruct the lateral wall to avoid osteoarthritis. In this study, we followed up cases with rib osteochondral autograft transplantation technique. Methods. Subjects were 20 cases who were followed up until after they started pitching. The mean age was 13.8 years old and the mean observation period was 2 years and 6 months (from 7 months to 6 year 3 months). Kocher's approach was used to give a good access to the aspect of the radiohumeral joint. The majority of cases suffered from extensive OCD of the elbow. Detached fragment was removed (Fig. 2a) and graft from 5. th. or 6. th. rib with screw fixation was performed on 12 patients and 8 received fixation with no material (Fig. 2b). Follow-up assessment included the range of motion, start time of playing catch and throwing a ball with full power, sports activity, evaluation of radiography, a subjective (including Pain, Swelling, Locking/Catching and Sport activity) and objective (Flexion contracture, Pronation/Supination and sagittal arc of motion) modified elbow rating system by Timmeman et al. We also investigated the details of the arthroscopy observations and the 2nd arthroscopy findings for 4 cases. Results. Preoperative elbow extension increased from −13.5 to −10 degrees and elbow flexion increased from 117 to 123 degrees, but no significant differences were found. All but one patient resumed baseball sporting activity. Catching was started at an average of 3.5 (2 to 5.5 months) months postoperatively and pitching the ball with full power was achieved at 6.7 months. One case was found to have degenerative changes on plain X-ray, and two cases were found to have deviated screws. The mean elbow rating system subjective score improved significantly from 63.9.5 to 89.5 points, as did the overall rating, increasing from 131.6 to 164.8 points. The 2. nd. arthroscopy observations for 4 patients showed that 2 experienced pain due to the loose body, 1 had a limitation in range of motion due to spur formation, and 1 had a screw deviation. Graft survival was observed in two out of four cases. Partial detachment was observed in two cases. Conclusion. Recovery of articular facets with hyaline cartilage were possible using this surgical technique, and in addition, the costal-costochondral grafts, comprising cortical and cancellous bone, were simultaneously transplanted en bloc. This indicates that it is adequate treatment for extensive OCD. All the patients started pitching 3 months postoperatively and returned to full baseball activities after 6 months. Even in cases with extensive OCD, with large osseous and cartilaginous deficits, the surgical technique was useful and showed favorable results

Cementless stem fixation is a widely used method of stem revision in North America and elsewhere in the world. There is abundant literature in its support. Most of the reports from 1985 to 2005 related to proximally or extensively porocoated designs, the former falling into disfavor with time because of unpredictable outcomes. With few exceptions (e.g. S-ROM) the modularity of these designs was limited to the head/neck junction. But this generation of designs was associated with some issues such as insertional fractures, limited control of anteversion (and risk of dislocation), limited applicability in the setting of severe bone loss (Paprosky Type 4 osteolysis or Vancouver Type B3 periprosthetic fracture), as well as ongoing concern relating to severe proximal stress shielding. In the past decade we have seen the mounting use of a new design concept: tapered fluted titanium stems (TFTS), which incorporate the advantages of titanium (for less flexural rigidity), conical taper (for vertical taper-lock stability), longitudinal ribs or flutes (for rotational stability), and surface preparation which attracts bone ongrowth for long term fixation. Four consecutive reports from our center have documented the superiority of the TFTS in our hands, with encouraging outcomes even when dealing with severe bone loss or periprosthetic fractures. There is an increasing body of other literature which reports a similar experience. Furthermore, with increasing experience and confidence in this design concept, we now use a monoblock or non-modular design in the majority of cases in which a TFTS is indicated. This circumvents the potential drawbacks of stem modularity, including taper corrosion and taper junction fracture. Our recent report of this concept in 104 cases with a 2-year minimum follow-up supports the use of this concept in many if not most stem revisions. The question remains as to which should be favored? Because of equipoise in the outcomes of the two fundamental stem designs, at least in our hands, clearly the surgeon needs to ask other, more practical questions:. Am I familiar enough with the TFTS technique so as to bypass the potential versatility of the modular stem for the simplicity and potential cost savings of the non-modular?. Is this a case in which modularity will offer me distinct advantages (periprosthetic fracture, and severe bone loss as examples). Should I introduce the nonmodular TFTS to my practice, choosing straightforward cases first; ones in which I would comfortably and with confidence use an extensively porocoated stem?

Introduction. Hip-Spine syndrome has various clinical aspects. For example, schoolchild with severe congenital dislocation of the hip have unfavorable standing posture and disadvantageous motions in ADL. Hip-Spine syndrome is closely related closely as the adjacent lumbar vertebrae and the hip joint. Furthermore, not only the pelvis and the lumbar spine, but also the neck position might influence on the maximum hip flexion angle. In this study, we examined the maximum hip flexion angle and pelvic movement angle by observing the lumbar spine, the pelvis and the neck in three different positions. Subjects and Methods. The participants were five healthy volunteers (three males and two females) and ranged in age from 16 to 49 years. We measured the hip flexion angle (=∠X) and the pelvic tilt angle (=∠Y), using Zebris WinData and putting the six markers on skin. The positions of the marker are Femur lateral condyle (M1), Greater trochanter (M2), Lateral margin of 10th rib (M3), Anterior superior iliac spine (M4), Superior lateral margin of Iliac (M5), and Acromion (M6). We performed maximum hip flexion three times in three positions and measured ∠X (=∠M1,2,3) and ∠Y (=∠M4,5,6) and calculated the mean and SD of each position. The first position (P1) that we investigated is the regular position specified by the Japanese Orthopedics Association and Rehabilitation Medical Association. The second position (P2) is performed in the limited position of the posterior pelvic tilt and lumbar movement, by placing the tube under the subject's lower back. The third position (P3) is the altered limited position of P2 added by placing the 500ml PET bottle filled water under the back of the subject's neck. Analysis. A two way factorial analysis of variance was used for statistical analysis to examine the difference among three different positions (P1, P2 and P3) in ∠X and ∠Y. A significance level was set at P < 0.05. We also calculated Spearman rank correlation coefficients to determine the correlation between ∠X and ∠Y. Results. There was a statistically significant difference among three different positions (P1, P2 and P3) in both ∠X and ∠Y (p < 0.01). Slight strong correlations were found between ∠X and ∠Y in three different positions. (r =0.5178571). The smallest values of ∠X and ∠Y were obtained in P1. The values of ∠X and ∠Y in P3 were all smaller than those in P2. Conclusions. The limited movement of pelvic and lumbar spine, and neck different positions give the limit to a maximum hip joint flexion angle

Retroversion, also referred to as posterior wear of the glenoid, can make resurfacing the glenoid challenging. However, careful pre-operative planning with three dimensional CT scanning can allow central placement of the glenoid component through removal of some of the anterior bone to allow contained placement and secure fixation within the glenoid vault. Since the scapula is not a fixed skeletal structure and moves substantially on the chest wall, the actual degree of posterior wear (retroversion) frequently is the result of extraneous biomechanical forces and structures. For example, the degree of kyphosis and shape of the rib cage can have a substantial impact on the relative position of the glenoid surface as it articulates with the humerus. Attempts to totally equalise this through implant augmentation have not, to date, been shown to be effective, and in some cases can be destabilising. Restoration of enough alignment to place the implant centrally can be achieved without need for augmentation even in some very hypoplastic glenoids. The technique for this straight-forward approach will be presented, including pre-surgical planning, in some cases, patient specific instrumentation, with demonstration of functional outcomes

Cementless stem fixation is a widely used method of stem revision in North America and elsewhere in the world. There is abundant literature in its support. Most of the reports from 1985 to 2005 related to proximally or extensively porocoated designs, the former falling into disfavor with time because of unpredictable outcomes. With few exceptions (eg S-ROM) the modularity of these designs was limited to the head/neck junction. But this generation of designs was associated with some issues such as insertional fractures, limited control of anteversion (and risk of dislocation), limited applicability in the setting of severe bone loss (Paprosky Type 4 osteolysis or Vancouver Type B3 periprosthetic fracture), as well as ongoing concern relating to severe proximal stress shielding. In the past decade we have seen the mounting use of a new design concept: tapered fluted titanium stems (TFTS), which incorporate the advantages of titanium (for less flexural rigidity), conical taper (for vertical taper-lock stability), longitudinal ribs and flutes (for rotational stability), and surface preparation which attracts bone on growth for long term fixation. Four consecutive reports from our center have documented the superiority of the TFTS in our hands, with encouraging outcomes even when dealing with severe bone loss or periprosthetic fractures. There is an increasing body of other literature which reports a similar experience. Furthermore, with increasing experience and confidence in this design, we now use a monoblock or non-modular design in greater than 95% of cases in which a TFTS is indicated at our center. This circumvents the potential drawbacks of stem modularity, including taper corrosion and taper junction fracture

Failure of the femoral component after a primary or revision THA is commonly associated with some degree of femoral bone loss. Depending on the quantity and quality of the remaining host bone, femoral stem revision can be challenging. Twenty patients with severe proximal femoral bone loss due to prosthetic loosening were treated by Wagner cementless self-locking revision stems with a mean follow up of 24 months (range 18–36 months). The indication of revision surgery was aseptic loosening in 16 patients and septic loosening in 4 cases. At the end of the follow up the mean Harris hip score increased from 35 to 86 points. Definite radiographic evidence of bone regeneration in the bony defects was achieved within 3 months in all patients. Implantation of a Wagner cementless selflocking revision stem provided satisfactory results. The Wagner SL Revision prosthesis, firmly and rotationally stable fixed in the medullary cavity of the healthy bone distal from the original prosthetic bed, with its conical longitudinal ribs and cementless anchorage, bridges the defective prosthetic bed and hereby leads to a condition of relative mechanical stability. With time, there is active ossification in the old prosthetic bed, replacing lost bone

OBJECTIVE OF THE STUDY. The objective of this study is to establish the medium-term clinical and radiological results with the cementless three-dimensional Vektor-Titan stem compared with conventional cementless stem, such as PerFix stem. The latter stem has a double-wedge design with a rounded distal portion for canal filling (Fig. 1). MATERIALS AND METHODS. From July, 2004, to May, 2010, fifty seven Vektor-Titan stems and 150 PerFix stems were implanted for the patients with osteoarthritis, avascular necrosis, femoral neck fracture, and rheumatoid arthritis in our hospital. The results were evaluated clinically using Japanese Orthopedic Association (JOA) scores and the Merle d’Aubigne and Postel (M&P) scores. Radiographs were analyzed retrospectively. The criteria used for determining loosening were migration or a total radiolucent zone between the prosthesis/bone cement and host bone, wherein the width increased progressively or change of position, i.e., migration or subsidence of the prosthesis. Migration of the socket seen on the radiograph was defined as either the presence of a ≥2-mm position change or rotation. Position changes of the stem seen on the radiograph were defined as the presence of a progressive subsidence of ≥2 mm or change of position, e.g., varus or valgus. The follow-up period was 9.2 ± 2.6 (range, 5.0–14.0) years. RESULTS. One patient had intraoperative femoral shaft fracture and healed by conservative treatment. The mean JOA and M&P scores improved from preoperative 39.3 and 6.8 points to postoperative 90.9 and 17.2 points, respectively. Thigh pain was less frequent for Vektor-Titan stems (Table 1). Radiolucent lines was far less likely to appear for Vektor-Titan stems evaluated by Gruen's zonal analyses (Table 2). On the other hand, there were radiolucent zones of more than 90% in zone 4 with cementless PerFix stems (Table 2). There was no cases of loosening or postoperative infection. Although signs of bone atrophy were found in the proximal femur and the trochanters in 66.7 % of all cases, bone structure was radiologically normal without stress shielding in most cases (Table 2). On the contrary, there was evidence of an even denser bone structure, such as trabeculae, at the tip of the stem and the lateral implant fixation within the greater trochanter in Vektor-Titan stem cases. These findings remained unchanged over observation periods. DISCUSSION AND CONCLUSIONS. The cementless Vektor-Titan stem is made of Ti6AI7Nb, has got the shape of a straight three-dimensional cone. It has a high proximal volume in the form of a three-dimensional taper with longitudinal ribs. This design achieves strong primary fixation in the proximal metaphysis. Radiologically, newly formed trabeculae toward to the stem were indicative of direct biological fixation at the bone-implant interface. Medium-term results with the cementless Vektor-Titan stem show no implant loosening with stable metaphyseal fixation and preservation of bone structure in the proximal femur and the absence of radiolucent zones around the stem compared with conventional cementless stem

Introduction. Although total hip replacement (THR) has been described as the operation of the century, there is still room for improvement. There is therefore continued effort for advanced implants and bearing surfaces, moreover so, for the younger patient with a longer life expectancy and increased needs. Objectives. This prospective case-series study aims to present the preliminary, minimum three-years, results of a novel uncemeted stem, the Leader StemÒ (Vadin Implants Ltd, London, U.K.). The Leader StemÒ is a titanium, tapered stem for immediate three-point fixation. There is a metaphyseal porous-coating with titanium microspheres for bone in-growth. It has anti-rotational ribs in the metaphyseal - diaphyseal junction to promote initial stability and a grit blasted diaphyseal region for bone on-growth. The distal tip is polished and shortened to minimize thigh pain, while the whole design and concept is one to eradicate stress shielding. Methods. Between June 2010 and May 2012 we operated on 20 males and 29 female patients (53 THRs, mean age 66±13 years). The diagnosis was osteoarthritis in 39 patients (41 THRs), developmental dysplasia in six patients (eight THRs), avascular necrosis in two patients (two THRs) and chondrolysis in two patients (two THRs). Operations were performed by the posterior approach by two hip surgeons. The bearing surface was ceramic on ceramic in six patients (eight THRs), metal on polyethylene in 22 patients (22 THRs) and ceramic on polyethylene in 21 patients (23 THRs). Patients' demographic data, Harris Hip Scores (HHS) and Oxford Hip Scores (OHS) were collected prospectively, preoperatively, postoperatively, and at six months intervals thereafter. Radiographic evaluation was performed on standard anteroposterior and lateral X-rays at the same time intervals. Results. At last follow-up, mean 50 months after surgery, no revision for any reason has been reported. Six patients were lost to follow-up and one deceased three years post-operatively from an unrelated reason with a stable and untroubled prosthesis. There was one periprosthetic fracture two years after the initial operation but with a stable prosthesis, which was treated with open reduction – internal fixation. Three patients had complained of thigh pain, which had resolved at last follow up. At the most recent follow-up, the average HHS improved from 33.9±13.6 preoperatively to 89.35±12.72 and OHS from 12.7±5.6 to 41.6±7.2. No clinical score was significantly correlated to any demographic index, but the latest HHS was well correlated to the pre-operative score (R=0.41, p=0.007). Radiographically, no radiolucent lines in any of the Gruen zones and no stem subsidence were observed at any time interval, while cortical hypertrophy was observed at the diaphyseal zone in two patients. Conclusions. This study showed that this new press-fit stem design had excellent short-term clinical and radiological results in all followed-up patients, irrespective of their age, gender, and body mass index. Longer follow-up is needed to evaluate its long-term survival and effectiveness