Aim. Periprosthetic joint infection (PJI) is a feared complication of total joint arthroplasty of hip (THA) or knee (TKA). Debridement, antibiotic treatment, and implant retention (DAIR) is an effective treatment of early PJI. In the Netherlands, cefazolin resistance in early PJI after primary arthroplasty is low. Little is known about causative micro-organisms and resistance patterns in PJI after
Aim. Success rate of debridement, antimicrobial and implant retention (DAIR) in high suspicion of early PJI after primary arthroplasty is 70–80%. No studies have been performed focusing on outcome of DAIR after
Aim. Perioperative myocardial infarction/injury (PMI) is a common complication in noncardiac surgery, contributing to postoperative morbidity and mortality. We aimed to identify the risk for PMI in periprosthetic joint infection (PJI) in comparison to primary hip (THA) and knee arthroplasty (TKA) and to non-PJI revision surgery. Methods. Patients undergoing primary/revision THA/TKA at a University Hospital who were eligible for the institutional PMI screening and response program were prospectively included.
Aim. Synovial fluid investigation is the best alternative to diagnose prosthetic joint infection (PJI) before adequate microbiological/histology sampling during revision surgery. Although accurate preoperative diagnosis is certainly recommended, puncturing every patient before
Aim. Dissolvable antibiotic-loaded calcium sulphate beads have been utilized for management of periprosthetic joint infection (PJI) and for aseptic
We present the indications and outcomes of a series of custom 3D printed titanium acetabular implants used over a 9 year period at our institution (Sydney, Australia), in the setting of revision total hip arthroplasty. Individualised image-based case planning with additive manufacturing of pelvic components was combined with screw fixation and off-the-shelf femoral components to treat patients presenting with failed hip arthroplasty involving acetabular bone loss. Retrospective chart review was performed on the practices of three contributing surgeons, with an initial search by item number of the Medicare Benefits Scheme linked to a case list maintained by the manufacturer. An analysis of indications, patient demographics and clinical outcome was performed. The cohort comprised 65.2% female with a median age of 70 years (interquartile range 61–77) and a median follow up of 32.9 months (IQR 13.1 - 49.7). The indications for surgery were infection (12.5%); aseptic loosening (78.1%) and fracture (9.4%), with 65.7% of cases undergoing previous revision hip arthroplasty. A tumour prosthesis was implanted into the proximal femur in 21.9% of cases. Complications were observed in 31.3% of cases, with four cases requiring revision procedures and no deaths reported in this series. Kaplan-Meier analysis of all-cause revision revealed an overall procedure survival of 88.7% at two years (95%confidence interval 69 - 96.2) and 83.8% (95%CI 62 - 93.7) at five years, with pelvic implant-specific survival of 98% (95%CI 86.6 - 99.7) at two and five year follow up. We conclude that an individualised planning approach for custom 3D printed titanium acetabular implants can provide high overall and implant-specific survival at up to five years follow up in complex cases of failed hip arthroplasty and acetabular bone loss.
Introduction. Acute infection following Total Hip Arthroplasty (THA) is a serious complication. It is commonly treated by irrigation and debridement (I&D) with component retention (exchange only the mobile parts of the joint - head and liner). However, the reported re-infection rate with the use of this approach remains high. We are reporting our experience in using single - stage
Prosthetic joint infection (PJI) is a devastating and costly complication of total joint arthroplasty (TJA). Use of extended oral antibiotic prophylaxis (EOAP) has become increasingly popular in the United States following a highly publicized study (Inabathula et al) from a single center demonstrating a significant protective effect (81% reduction) against PJI in ‘high-risk’ patients. However, these results have not been reproduced elsewhere and EOAP use directly conflicts with current antibiotic stewardship efforts. In order to study the role of EOAP in PJI prevention, consensus is needed for what defines ‘high-risk’ patients. The revision TJA (rTJA) population is an appropriate group to study due to having a higher incidence of PJI. The purpose of the current study was to rigorously determine which preoperative conditions described by Inabathula et al. (referred to as Inabathula criteria (IBC)) confer a higher rate of PJI in patients undergoing aseptic rTJA. 2,256 patients that underwent aseptic rTJA at a single high-volume institution between 2016–2022 were retrospectively reviewed. Patient demographics and comorbidities were recorded to determine if they had 1 or more ‘IBC’, a long list of preoperative conditions including autoimmune diseases, active smoking, body mass index (BMI)>35, diabetes mellitus, and chronic kidney disease (CKD). Reoperation for PJI at 90-days and 1-year was recorded. Chi-squared or Fischer's exact tests were calculated to determine the association between preoperative presence/absence of IBC and PJI. Multivariable logistic regressions were conducted to determine if specific comorbidities within the IBC individually conferred an increased PJI risk.Aim
Method
Background. KAR™ prosthesis was introduced following the success of Corail® femoral stem to tackle difficult revision cases (Paprosky type1, 2a, 2b and 3a). The ARTO group reported a success rate of 94% at 17 years follow-up. Only two independent studies reported similar success rate to date. Purpose. To analyse the short-term performance of the KAR™ prosthesis used in our unit. Methods. This was a retrospective study of all KAR™ prosthesis between 2005 and 2013. Basic demographic, stem size, indications, failures and complications were recorded. X-rays were analysed for evidence of implant failure and distal cortical hypertrophy. Results. A total of 83 cases were analysed. The mean age was 68 (range 38–88 years) with an average follow-up was 3 years (range 1–8 years). The main indications for revision were aseptic loosening (83.7%), and periprosthetic fractures (7%). Kaplan-Meier Survival Rate for ‘all reasons of failure’ and ‘stem loosening’ was 93.83% and 100% respectively at 3 years follow-up. The most common reason for failure following KAR™ revision was periprosthetic fracture (3 cases). All three cases had radiographic evidence of proximal bone loss prior to index revision. Two patients developed deep infection and one patient had stem subsidence requiring revision. One patient sustained dislocation but revision surgery was not required. When comparing the effect of cortical hypertrophy, there were no significant differences in the measured distal canal/cortical diameter over the entire period of follow-up. Discussion. KAR™ prosthesis offers respectable clinical performance over a short-term period. Revision rate for this system was comparable to other ‘independent non-designer’ study. The three patients that sustained periprosthetic fracture may have been better served with a distally locked stem revision system. We believe that this HA coated implant encourages consistent osseointegration around the metaphysis region when there is evidence of a sound distal fixation. Conclusion. This study confirms that this fully coated hydroxyapatite titanium stem offers reliable clinical performance in
The aim of this study was to assess the incidence the microbiological spectrum and clinical outcome of hip and knee revision arthroplasties with unexpected-positive-intraoperative-cultures (UPIC) at a single center with minimum follow up of 2 years. We retrospectively analyzed our prospectively maintained institutional arthroplasty registry. Between 2011 and 2020 we performed presumably aseptic rTHA (n=939) and rTKA (n= 1,058). Clinical outcome, re-revision rates and causes as well as the microbiological spectrum were evaluated.Aims
Methods
Dual mobility (DM) total hip arthroplasty (THA) prostheses are designed to increase stability. In the setting of primary and revision THA, DM THA are used most frequently for dysplasia and instability diagnoses, respectively. As the use of DM THA continues to increase, with 8,031 cases logged in the American Joint Replacement Registry from 2012–2018, characterizing Under IRB-approved implant retrieval protocol, 43 DM THA systems from 41 patients were included. Each DM THA component was macroscopically examined for standard damage modes. Clinically-relevant data, including patient demographics and surgical elements, were collected from medical records. Fretting and corrosion damage grading is planned, according to the Goldberg Introduction
Methods
Revision total hip arthroplasty is a complex procedure and becoming more common. Acetabular implant loosening or fracture has previously been treated with a cup and cage construct. Recent studies have shown significant failure rates with Cup Cage constructs in more complex 3B and 3C Acetabular revisions. As a result the use of 3D printed custom made acetabular components has become more common. We present 5 cases with severe acetabular bone loss that were treated with 3D printed acetabular components. The components were manufactured by OSSIS medical in New Zealand. The patient's original femoral stem was retained in all cases. Pre operatively the implant design was approved by the arthroplasty team prior to final manufacture. Implants were provided with a sterilisable model used intraoperatively for reference.Introduction
Method
A stiff total knee arthroplasty (TKA) is an uncommon but disabling problem because it causes pain and limited function. Revision surgery has been reported as a satisfactory treatment option for stiffness with modest benefits. The aim of this study was to evaluate the results of revision surgery for the treatment of stiffness after TKA. We defined stiffness as 15 degrees or more of flexion contracture or less than 75º of flexion or a range of motion of 90º or less presenting with a chief complain of limited range of motion and pain. We evaluated the results of forty-two revisions performed by one of four orthopedic surgeons due to stiffness after TKA. Patients with history of infection or isolated polyethylene insert exchange were excluded.Introduction
Methods
Joint replacement is a highly effective intervention to treat osteoarthritis of the hip, relieving pain and improving mobility and quality of life.(1) Periprosthetic joint infection (PJI) is a devastating complication after arthroplasty. Debridement, antibiotics and implant retention are treatment of first choice in case of early infection after total hip arthroplasty (THA).(2) In case of persisting infection, one- or two-stage revision needs to be performed.(3) The use of different kinds of spacers has been widely debated in the past years.(4) The aim of this study was to determine which type of spacer should be used during the interval of two-stage revision of an infected THA. A search term with Boolean operators was constructed. We extracted all information regarding study and patient characteristics and baseline clinical and laboratory findings. Data regarding type of spacer and antibiotics used, timing of second stage surgery, tissue culture results, postoperative regimen, functional outcome and patient satisfaction were extracted. A total of twenty-six studies met our inclusion criteria and were included for data analysis. Ten studies described various preformed spacers, six studies described functional spacers and eleven studies described custom made spacers. See Table 1 for results. Research should focus on finding the preferred type of treatment and type of spacer to combine a high success rate of infection treatment with a good functional and patient reported outcome. There is a need for a prospective study evaluating patient satisfaction and functional outcome after two-stage revision THA comparing various spacers. Secondly, research should focus on the optimal timing of the second stage procedure. Functional spacers achieve a comparable rate of infection eradication in the treatment of periprosthetic hip joint infections as compared to preformed spacers. There is insufficient evidence concerning rehabilitation and functional outcome after two-stage revisionTHA to advocate or discourage the use of either kind of interval spacer.
There is no doubt that peri-prosthetic joint infection (PJI) is one the most terrible complications of joint arthroplasty. There has been a surge of interest in PJI in recent years as this problem moves to be the last frontier in joint arthroplasty. There are a number of strategies employed for prevention of PJI. Irrigation of the surgical site with various irrigation solutions is one such strategy as it helps reduce bioburden in the wound and reduce the potential for subsequent infection. Although the irrigation solution may work by dilution phenomenon alone, some believe that bactericidal or bacteriostatic agents may be added to the irrigation solution to increase its efficacy. Addition of antibiotics (Abx) to the irrigation solution stems from the same reasoning. There are a number of serious issues related to the addition of Abx to the irrigation solution or in fact, for pouring into the wound (like the vancomycin powder). Efficacy: There are no randomised prospective studies to demonstrate that addition of Abx to the irrigation solution improves “kill”. To do such a study would be logistically challenging. Basic science studies and other clinical studies with a small number of patients have failed to prove the efficacy of Abx in the irrigation solution. In fact, I would argue that the use of agents like dilute betadine is much more likely to be effective in reduction of bioburden without having many of the issues related to the use of Abx in irrigation solution. Emergence of Resistance: Some may argue what would one lose by adding Abx to the wound or the irrigation solution. The modern society is facing an emerging catastrophe. Antimicrobial Resistance (AMR), if it persists, will kill more people than cancer by the year 2050. Annually 1000s of patients die of ESKAPE or AMR related issues. A recent task force convened by the British government produced a report about AMR which is sobering. The main finding of the task force was that continued liberal use of Abx will lead to further escalation of the AMR crisis that threatens the modern society. The guidelines by the CDC, that are about to be published, will discourage clinicians from pouring Abx into wounds and asks clinicians to exercise Abx stewardship. Expense: There are costs associated with the use of Abx in any circumstance including their addition to irrigation solution. With over 1 million joint arthroplasties being done in the US alone, this cost can be substantial. Hypersensitivity reactions: The use of Abx is not without problems. There have been a few fatalities associated with the use of Abx in patients with recognised and possibly unrecognised hypersensitivity to antibiotics.
Infection is still a major problem in implant surgery. Most infections are caused by bacteria that enter the wound at the time of the operation. Although prophylactic antibiotics given intravenously have been shown to be effective if given during the correct time frame, the concentration of local antibiotics in the knee in response to intravenous antibiotics is about 1/3 that achieved in the serum, and the level is transient. The concentration of antibiotics in the joint fluid achieved with antibiotics applied locally during surgery is 1000 times higher, and can be maintained throughout the procedure. High concentration persists in drainage fluid for 24 hours after surgery. Studies done with use of local antibiotics in spinal implant surgery indicate a major reduction in the rate of infection, and cost analysis shows a remarkable monetary benefit to this effect. Local antibiotic irrigation during implant surgery is inexpensive, easy, and effective.
A common step to revision surgery for infected total knee replacement (TKR) is a thorough debridement. Whilst surgical and mechanical debridement are established as the gold standard, we investigate a novel adjuvant chemical debridement using an Acetic Acid (AA) soak that seeks to create a hostile environment for organisms, further degradation of biofilm and death of the bacteria. We report the first orthopaedic in vivo series using AA soak as an intra-operative chemical debridement agent for treating infected TKR's. We also investigate the in vitro efficacy of AA against bacteria isolated from infected TKR's. A prospective single surgeon consecutive series of patients with infected TKR were treated according to a standard debridement protocol. Patients in the series received sequential debridement of surgical, mechanical and finally chemical debridement with a 10 minute 3% AA soak. In parallel, we isolated, cultured and identified bacteria from infected TKR's and assessed the in vitro efficacy of AA. Susceptibility testing was performed with AA solutions of different concentrations as well as with a control of a gentamicin sulphate disc. The effect of AA on the pH of tryptone soya was also monitored in an attempt to understand its potential mechanism of action. Physiological responses during the AA soak were unremarkable. Intraoperatively, there were no tachycardic or arrythmic responses, any increase in respiratory rate or changes in blood pressure. This was also the case when the tourniquet was released. In addition, during the post-operative period no increase in analgesic requirements or wound complications was noted. Wound and soft tissue healing was excellent and there have not been any early recurrent infections at mean of 18 months follow up. In vitro, zones of inhibition were formed on less than 40% of the organisms, demonstrating that AA was not directly bactericidal against the majority of the clinical isolates. However, when cultured in a bacterial suspension, AA completely inhibited the growth of the isolates at concentrations as low as 0.19%v/v. This study has shown that the use of 3% AA soak, as part of a debridement protocol, is safe. Whilst the exact mechanism of action of acetic acid is yet to be determined, we have demonstrated that concentrations as low as 0.19%v/v in solution in vitro is sufficient to completely inhibit bacterial growth from infected TKR's.
Aim. In 10% of the presumed aseptic hip or knee revisions, a low-grade infection is unexpectedly diagnosed based on the tissue samples taken during revision. Extended antimicrobial prophylaxis can possibly reduce the failure rate in cases of unexpected PJI, because the prophylaxis can be considered as early empiric treatment. In this randomized controlled study we analysed whether extended antimicrobial prophylaxis compared to a single dose is beneficial to improve the outcome of treatment in unexpected PJI in
Aim. Repeat revision surgery of total hip or knee replacement may lead to massive bone loss of the femur. If these defects exceed a critical amount a stable fixation of a proximal or distal femur replacement may not be possible. In these extraordinary cases a total femur replacement (TFR) may be used as an option for limb salvage. In this retrospective study we examined complications, revision free survival (RFS), amputation free survival (AFS) and risk factors for decreased RFS and AFS following a TRF in cases of
Aim. Little is known about microbiological spectrum and resistance patterns as well as the clinical outcome in patients who undergo a repeat first stage procedure as part of a 2-stage