A retrospective follow-up study was done, assessing regional practices in acute cervical reduction in hospitals in the Western Cape. The constitutional court ruled on the urgency in managing cervical dislocations, and our task is to ensure that medical treatment is optimized to comply with best medical practice and the apex court. A questionnaire was distributed and completed by emergency departments at each hospital, the results retrieved, analysed, and compared to a similar survey done in 2016. Protocols for managing cervical spine dislocations had improved from 80% having no protocols to only over half of facilities (52,6%) not having protocols in place. Inadequate equipment availability remained a problem with only 50% of facilities having adequate equipment available in 2016 to 43,6% in 2023. 10,3% of participants did not know if there was equipment available. In terms of knowledge, there remained poor formal training with a drop from 93% participants identifying that the main indication to attempt emergency cervical reduction was acute cervical dislocation with worsening neurology, to only 46,2%. However, there was an increase in the number of participants who thought reduction was safe. The same percentage of participants from 2016 to 2023 would attempt emergency cervical reduction if given adequate training. Previously we found that most Western Cape hospitals had inadequate protocols, training, and equipment for cervical reductions. In 2023, more hospitals in the Province have protocols in place for cervical reductions and the same percentage of doctors would attempt emergency cervical reduction with adequate training. However, equipment and training for management of acute cervical dislocations has not improved. We conclude that most Western Cape Hospitals are unprepared to adequately manage acute cervical dislocations

Despite the current trend favoring surgical treatment of displaced intra-articular calcaneal fractures (DIACFs), studies have not been able to demonstrate superior functional outcomes when compared to non-operative treatment. These fractures are notoriously difficult to reduce. Studies investigating surgical fixation often lack information about the quality of reduction even though it may play an important role in the success of this procedure. We wanted to establish if, amongst surgically treated DIACF, an anatomic reduction led to improved functional outcomes at 12 months. From July 2011 to December 2020, at a level I trauma center, 84 patients with an isolated DIACF scheduled for surgical fixation with plate and screws using a lateral extensile approach were enrolled in this prospective cohort study and followed over a 12-month period. Post-operative computed tomography (CT) imaging of bilateral feet was obtained to assess surgical reduction using a combination of pre-determined parameters: Böhler's angle, calcaneal height, congruence and articular step-off of the posterior facet and calcaneocuboid (CC) joint. Reduction was judged anatomic when Böhler's angle and calcaneal height were within 20% of the contralateral foot while the posterior facet and CC joint had to be congruent with a step-off less than 2 mm. Several functional scores related to foot and ankle pathology were used to evaluate functional outcomes (American Orthopedic Foot and Ankle Score - AOFAS, Lower Extremity Functional Score - LEFS, Olerud and Molander Ankle Score - OMAS, Calcaneal Functional Scoring System - CFSS, Visual Analog Scale for pain - VAS) and were compared between anatomic and nonanatomic DIAFCs using Student's t-test. Demographic data and information about injury severity were collected for each patient. Among the 84 enrolled patients, 6 were excluded while 11 were lost to follow-up. Thirty-nine patients had a nonanatomic reduction while 35 patients had an anatomic reduction (47%). Baseline characteristics were similar in both groups. When we compared the injury severity as defined by the Sanders’ Classification, we did not find a significant difference. In other words, the nonanatomic group did not have a greater proportion of complex fractures. Anatomically reduced DIACFs showed significantly superior results at 12 months for all but one scoring system (mean difference at 12 months: AOFAS 3.97, p = 0.12; LEFS 7.46, p = 0.003; OMAS 13.6, p = 0.002, CFSS 7.5, p = 0.037; VAS −1.53, p = 0.005). Univariate analyses did not show that smoking status, worker's compensation or body mass index were associated with functional outcomes. Moreover, fracture severity could not predict functional outcomes at 12 months. This study showed superior functional outcomes in patients with a DIACF when an anatomic reduction is achieved regardless of the injury severity

Despite the current trend favoring surgical treatment of displaced intra-articular calcaneal fractures (DIACFs), studies have not been able to demonstrate superior functional outcomes when compared to non-operative treatment. These fractures are notoriously difficult to reduce. Studies investigating surgical fixation often lack information about the quality of reduction even though it may play an important role in the success of this procedure. We wanted to establish if, amongst surgically treated DIACF, an anatomic reduction led to improved functional outcomes at 12 months. From July 2011 to December 2020, at a level I trauma center, 84 patients with an isolated DIACF scheduled for surgical fixation with plate and screws using a lateral extensile approach were enrolled in this prospective cohort study and followed over a 12-month period. Post-operative computed tomography (CT) imaging of bilateral feet was obtained to assess surgical reduction using a combination of pre-determined parameters: Böhler's angle, calcaneal height, congruence and articular step-off of the posterior facet and calcaneocuboid (CC) joint. Reduction was judged anatomic when Böhler's angle and calcaneal height were within 20% of the contralateral foot while the posterior facet and CC joint had to be congruent with a step-off less than 2 mm. Several functional scores related to foot and ankle pathology were used to evaluate functional outcomes (American Orthopedic Foot and Ankle Score - AOFAS, Lower Extremity Functional Score - LEFS, Olerud and Molander Ankle Score - OMAS, Calcaneal Functional Scoring System - CFSS, Visual Analog Scale for pain – VAS) and were compared between anatomic and nonanatomic DIAFCs using Student's t-test. Demographic data and information about injury severity were collected for each patient. Among the 84 enrolled patients, 6 were excluded while 11 were lost to follow-up. Thirty-nine patients had a nonanatomic reduction while 35 patients had an anatomic reduction (47%). Baseline characteristics were similar in both groups. When we compared the injury severity as defined by the Sanders’ Classification, we did not find a significant difference. In other words, the nonanatomic group did not have a greater proportion of complex fractures. Anatomically reduced DIACFs showed significantly superior results at 12 months for all but one scoring system (mean difference at 12 months: AOFAS 3.97, p = 0.12; LEFS 7.46, p = 0.003; OMAS 13.6, p = 0.002, CFSS 7.5, p = 0.037; VAS −1.53, p = 0.005). Univariate analyses did not show that smoking status, worker's compensation or body mass index were associated with functional outcomes. Moreover, fracture severity could not predict functional outcomes at 12 months. This study showed superior functional outcomes in patients with a DIACF when an anatomic reduction is achieved regardless of the injury severity

Introduction. Acquired chronic radial head (RH) dislocations present a significant surgical challenge. Co-existing deformity, length discrepancy and RH dysplasia, in multiply operated patients often preclude acute correction. This study reports the clinical and radiological outcomes in children, treated with circular frames for gradual RH reduction. Materials and Methods. Patient cohort from a prospective database was reviewed to identity all circular frames for RH dislocations between 2000–2021. Patient demographics, clinical range and radiographic parameters were recorded. Results. From a cohort of 127 UL frames, 30 chronic RH dislocations (14 anterior, 16 posterior) were identified. Mean age at surgery was 10yrs (5–17). Six pathologies were reported (14 post-traumatic, 11 HME, 2 Nail-Patella, 1 Olliers, OI, Rickets). 70% had a congruent RH reduction at final follow-up. Three cases re-dislocated and 6 had some mild persistent incongruency. Average follow up duration was 4.1yrs (9mnths-11.5yrs). Mean radiographic correction achieved in coronal plane 9. o. , sagittal plane 7. o. and carrying angle 12. o. Mean ulna length gained was 7mm and final ulnar variance was 7mm negative (congenital). All cases achieved bony union with 2 requiring bone grafting. Mean frame duration was 166 days. Mean final range of motion was 64. o. supination, 54 . o. pronation, 2. o. to 138. o. flexion. 5 complications and 7 further operations were reported. Conclusions. The majority of children having frame correction achieve complete correction or minor subluxation, which is well tolerated clinically. Frame assisted reduction is an effective tool for selective complex cases irrespective of the pathology driving the RH dislocation

ZrN-multilayer coating is clinically well established in total knee arthroplasty [1-3] and has demonstrated significant reduction in polyethylene wear and metal ion release [4,5]. The goal of our study was to analyze the biotribological behaviour of the ZrN-multilayer coating on a polished cobalt-chromium cemented hip stem. CoCr28Mo6 alloy hip stems with ZrN-multilayer coating (CoreHip®AS) were tested versus an un-coated version. In a worst-case-scenario the stems with ceramic heads have been tested in bovine serum in a severe cement interface debonding condition under a cyclic load of 3,875 N for 15 million cycles. After 1, 3, 5, 10 & 15 million cycles the surface texture was analysed by scanning-electron-microscopy (SEM) and energy-dispersive x-ray (EDX). Metal ion concentration of Co,Cr,Mo was measured by inductively coupled plasma mass spectroscopy (ICP-MS) after each test interval. Based on SEM/EDX analysis, it has been demonstrated that the ZrN-multilayer coating keeps his integrity over 15 million cycles of severe stem cemented interface debonding without any exposure of the CoCr28Mo6 substrate. The ZrN-multilayer coated polished cobalt-chromium cemented hip stem has shown a reduction of Co & Cr metal ion release by two orders of a magnitude, even under severe stem debonding and high interface micro-motion conditions. ZrN-multilayer coating on polished cobalt-chromium cemented hip stems might be a suitable option for further minimisation of Co & Cr metal ion release in total hip arthroplasty. Clinical evidence has to be proven during the next years

Distal radius fractures are among the most common fractures seen in the emergency department. Closed reduction can provide definitive management when acceptable radiographic parameters are met. Repeated attempts of closed reduction are often performed to improve the alignment and avoid operative management. However, multiple reduction attempts may worsen dorsal comminution and lead to eventual loss of reduction, resulting in no demonstrable benefit. We hypothesize that compared to one closed reduction attempt, repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures has a low success rate in the prevention of operative fixation and improvement of radiographic parameters. Initial and post reduction radiographs for all distal radius fractures managed at Vancouver General Hospital between 2015 and 2018 were reviewed. Inclusion criteria were based on the AO fracture classification and included types 23-A2.1, 23-A2.2 and 23-A3. Exclusion criteria included age less than 18, intra-articular involvement with more than two millimeters of displacement, volar or dorsal Barton fractures, fracture-dislocations, open fractures and volar angulation of the distal segment. Distal radius fractures that met study criteria and underwent two or more attempts of closed reduction were matched by age and gender with fractures that underwent one closed reduction. Radiographic parameters including radial height and inclination, ulnar variance and volar tilt were compared between groups. Sixty-eight distal radius fractures that met study criteria and underwent multiple closed reduction attempts were identified. A repeated closed reduction initially improved the radial height (p = 0.03) and volar tilt (p < 0.001). However, by six to eight weeks the improvement in radial height had been lost (p = 0.001). Comparison of radiographic parameters between the single reduction and multiple reduction groups revealed no difference in any of the radiographic parameters at one week of follow up. By six to eight weeks, the single reduction group had greater radial height (p = 0.01) ulnar variance (p = 0.05) and volar tilt (p = 0.02) compared to the multiple reduction group. With respect to definitive management, 38% of patients who underwent a repeated closed reduction subsequently received surgery, compared to 13% in the single reduction group (p = 0.001). Repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures did not improve alignment compared to a single closed reduction and was associated with increased frequency of surgical fixation. The benefit of repeating a closed reduction should be carefully considered when managing distal radius fractures of this nature

Malalignment is a common complication following tibial surgery, occurring in 10% of fractures. This is associated with prolonged healing time and non-union. It occurs due to inability to maintain a satisfactory reduction. A reduction device, such as the Staffordshire Orthopaedic Reduction Machine (STORM), permits the surgeon to manipulate the fracture and hold it reduced. A retrospective parallel case series was undertaken of all patients undergoing tibial nails over a six-year period from 2014 to 2021. Patient demographics were obtained from medical records. Operative times obtained from the theatre IT system and included the time patient entered theatre and surgical start and finish times for each case. Anteroposterior and lateral long leg post-operative radiographs were reviewed. Angulation was measured in both coronal and sagittal planes, by two separate orthopaedic surgeons. A reduction was classified to be ‘mal-aligned’ if the angle measured was greater than 5 degrees. One tailed unpaired t-test was used to compare alignment in each plane. Bony union was assessed on subsequent radiographs and was determined according to the Radiographic Union Score for Tibial Fractures. 31 patients underwent tibial nail during the time period. 8 patients were lost to follow up and were excluded. Of the remaining 23 patients, the STORM device was utilised in 11. The overall mean alignment was acceptable across all groups at 2.17° in the coronal plane and 2.56° in the saggital plane. Analysing each group individually demonstrated an improved alignment when STORM was utilised: 1.7° (1°–3°) vs 2.54° (0°–5°) for the coronal plane and 1.6° (0°–3°) vs 3.31° (0°–9°) in the saggital plane. This difference was significant in saggital alignment (p=0.03) and showed a positive trend in coronal alignment, although was not significant (p=0.08). The time in theatre was shorter in the control group with a mean of 113 minutes (65 to 219) in comparison to STORM with a mean of 140 minutes (105 to 180), an increased theatre time of 27 minutes (p=0.04). This study demonstrates that STORM can be used in the surgical treatment of tibial fractures resulting in improved fracture alignment with a modest increase in theatre time

Distal radius fractures are among the most common fractures seen in the emergency department. Closed reduction can provide definitive management when acceptable radiographic parameters are met. Repeated attempts of closed reduction are often performed to improve the alignment and avoid operative management. However, multiple reduction attempts may worsen dorsal comminution and lead to eventual loss of reduction, resulting in no demonstrable benefit. We hypothesize that compared to one closed reduction attempt, repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures has a low success rate in the prevention of operative fixation and improvement of radiographic parameters. Initial and post reduction radiographs for all distal radius fractures managed at Vancouver General Hospital between 2015 and 2018 were reviewed. Inclusion criteria were based on the AO fracture classification and included types 23-A2.1, 23-A2.2 and 23-A3. Exclusion criteria included age less than 18, intra-articular involvement with more than two millimeters of displacement, volar or dorsal Barton fractures, fracture-dislocations, open fractures and volar angulation of the distal segment. Distal radius fractures that met study criteria and underwent two or more attempts of closed reduction were matched by age and gender with fractures that underwent one closed reduction. Radiographic parameters including radial height and inclination, ulnar variance and volar tilt were compared between groups. Sixty-eight distal radius fractures that met study criteria and underwent multiple closed reduction attempts were identified. A repeated closed reduction initially improved the radial height (p = 0.03) and volar tilt (p < 0.001). However, by six to eight weeks the improvement in radial height had been lost (p = 0.001). Comparison of radiographic parameters between the single reduction and multiple reduction groups revealed no difference in any of the radiographic parameters at one week of follow up. By six to eight weeks, the single reduction group had greater radial height (p = 0.01) ulnar variance (p = 0.05) and volar tilt (p = 0.02) compared to the multiple reduction group. With respect to definitive management, 38% of patients who underwent a repeated closed reduction subsequently received surgery, compared to 13% in the single reduction group (p = 0.001). Repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures did not improve alignment compared to a single closed reduction and was associated with increased frequency of surgical fixation. The benefit of repeating a closed reduction should be carefully considered when managing distal radius fractures of this nature

Flexible fixation techniques combined with anatomic (open) syndesmosis reduction have demonstrated improved functional outcomes and rates of malreduction. Suture-button devices allow physiologic motion of the syndesmosis without need for implant removal, which may lower the risk of recurrent syndesmotic diastasis. There is limited longer-term assessment of the maintenance of reduction between static and flexible syndesmotic fixation using bilateral ankle CT evaluation. This is an a priori planned subgroup analysis of a multi-centre, randomized clinical trial comparing static syndesmosis fixation (two 3.5 mm screws) with flexible fixation (single knotless Tightrope) for patients with AO- OTA 44-C injuries. Patients who completed bilateral ankle CT scans at 3- and 12-month follow-up were included. The primary outcome measure was syndesmotic malreduction based on bilateral ankle CT scans, using the uninjured, contralateral ankle as a control. Anterior (ASD), middle (MSD), and posterior (PSD) syndesmosis distance were calculated to measure syndesmosis reduction. Secondary outcomes included re-operation, adverse events and functional outcomes including the EQ5D, Olerud-Molander Ankle Score (OM), Foot and Ankle Disability Index (FADI), and Work Productivity Activity Impairment Questionnaire (WPAI). Paired samples t-tests were used to compare injured to control ankles (R, v 3.5.1). 42 patients (24 Group S, 18 Group T) were included. ASD for Group T was 5.22mm (95%CI 4.69–5.77) at 3 months compared to 4.26mm (95%CI 3.82–4.71; p=0.007) in controls and 5.38mm (95%CI 4.72–6.04) at 12 months compared to 4.44mm (95%CI 3.73–5.16; p=0.048) in controls. ASD for Group S was 4.63mm (95%CI 4.17– 5.10) at 3 months compared to 4.67mm (95%CI 4.24–5.10; p=0.61) in controls, but significantly increased to 5.73mm (95%CI 4.81–6.66) at 12 months compared to 4.65mm (95%CI 4.15–5.15; p=0.04) in controls. MSD results were similar; Group T had a larger MSD than control ankles at 3 months (p=0.03) and 12 months (p=0.01), while the MSD in Group S was not different at 3 months (p=0.80) but increased at 12 months (p=<0.01). 88% (21/24) of Group S had broken or removed screws by 12 months. Unplanned re-operation was 15% in Group S and 4% in Group T (p=0.02), with an overall re-operation rate of 30% in Group S. There was no significant difference between treatment groups for EQ-5D, OM, FADI or WPAI at 3- or 12-month follow-up. Tightrope fixation resulted in greater diastasis of the ASD and MSD compared to contralateral, uninjured ankles at 3- and 12-months post-fixation. Group S initially had syndesmotic reduction similar to control ankles, but between 3- and 12-months post-fixation, there was significantly increased syndesmosis diastasis compared to controls. The majority of Group S (88%) had either broken screws or scheduled screw removal, which may explain the increased tibio-fibular diastasis seen at 12-months

Introduction. Non-unions often arise because of high strain environments at fracture sites. Revision fixation, bone grafting and biologic treatments to treat long bone fracture non-union can be expensive and invasive. Percutaneous strain reduction screws (PSRS) can be inserted as a day-case surgical procedure to supplement primary fixation at a fraction of the cost of traditional treatments. Screw insertion perpendicular to the plane of a non-union can resist shear forces and achieve union by modifying the strain environment. A multi-centre retrospective study was undertaken to confirm the results of the initial published case series, ascertain whether this technique can be adopted outside of the developing institution and assess the financial impact of this technique. Materials and Methods. Retrospective analysis was performed for all PSRS cases used to treat un-united long bone fractures in four level 1 trauma centres from 2016 to 2020. All patients were followed up until union was achieved or further management was required. Demographic data was collected on patients, as were data about their injuries, initial management and timings of all treatments received. A comparative cost analysis was performed comparing patients treated with PSRS and with traditional non-union surgery methods. Results. 51 patients were treated with the PSRS technique. 45 (88%) patients achieved union at a median time of 5.2 months (range 1.0 – 24.7). Comparable results were seen between the developing institution and independent units. No patients experienced adverse events beyond failure to achieve union. PSRS appears to offer savings of between £2,957 to £11,231 per case compared with traditional methods of non-union surgery. Conclusions. PSRS is a safe, cost-effective treatment for long bone non-union. The promising results of the initial case series have now been replicated outside of the developing institution

Scaphoid non-union results the typical humpback deformity, pronation of the distal fragment, and a bone defect in the non-union site with shortening. Bone grafting, whether open or arthroscopic, relies on fluoroscopic and direct visual assessment of reduction. However, because of the bone defect and irregular geometry, it is difficult to determine the precise width of the bone gap and restore the original bone length, and to correct interfragmentary rotation. Correction of alignment can be performed by computer-assisted planning and intraoperative guidance. The use of computer navigation in guiding reduction in scaphoid non-unions and displaced fractures has not been reported. Objective. We propose a method of anatomical reconstruction in scaphoid non-union by computer-assisted preoperative planning combined with intraoperative computer navigation. This could be done in conjunction with a minimally invasive, arthroscopic bone grafting technique. Methods. A model consisting of a scaphoid bone with a simulated fracture, a forearm model, and an attached patient tracker was used. 2 titanium K-wires were inserted into the distal scaphoid fragment. 3D images were acquired and matched to those from a computed tomography (CT) scan. In an image processing software, the non-union was reduced and pin tracts were planned into the proximal fragment. The K-wires were driven into the proximal fragment under computer navigation. Reduction was assessed by direct measurement. These steps were repeated in a cadaveric upper limb. A scaphoid fracture was created and a patient tracker was inserted into the radial shaft. A post-fixation CT was obtained to assess reduction. Results and Discussion. In both models, satisfactory alignment was obtained. There were minimal displacement and articular stepping, and scaphoid length was restored with less than 1mm discrepancy. This study demonstrated that an accurate reduction of the scaphoid in non-unions and displaced fractures can be accurately performed using computed navigation and computer-assisted planning. It is the first report on the use of computer navigation in correction of alignment in the wrist

Purpose of the study. This study aims to evaluate the use of closed reduction of hips with developmental dysplasia of the hip (DDH) and medial open reduction of these hips as a subsection of closed reduced hips. Methods. The study was a retrospective analysis of treatment of 30 children with developmental dysplasia of the hip (DDH). These children were taken from a consecutive series of children treated over a period from June 2000 to 2011 with closed reduction by a single surgeon. The ages at the time of diagnosis were between 1 day and 13 months (mean 5.25 weeks). Included in this series are 7 patients treated with medial open reduction, all done with the Ludloff approach. Follow up of these patients was from 8 months to 12 years (mean 5 years). All patients needing secondary procedures were noted. The X- rays were evaluated for percentage acetabulum cover in patients over the age of 8 and improvement of the acetabular index in all these patients. Results. 4 children needed secondary procedures. 1 child of the closed reduction group developed avascular necrosis of the femoral head that was treated with a Salter osteotomy and a further 2 needed secondary open reductions after redislocation following initial closed reduction. One child with bilateral open medial reductions had a Salter osteotomy 6 years after the initial treatment was done. 26 of the children had good outcomes with improvement of the acetabular angles, percentage acetabular cover and pain free independent ambulation. The average acetabular index improved from 37.5° to 23.3°. Conclusion. Closed reduction of DDH hips is a good treatment modality. Early treatment allows for acetabular and femoral development. There are minimal secondary procedures necessary after closed reduction, and open medial reduction does not increase the complication rate. NO DISCLOSURES

Aim. Strenuous efforts to minimize postoperative infection rates have been made, including the Swedish nation-wide initiative Prosthesis Related Infections Shall be Stopped (PRISS). The aim of this study was to calculate the incidence rate of periprosthetic joint infections (PJI) following primary total knee arthroplasty (TKA) before and after PRISS. Method. All 45,438 primary TKAs registered in the Swedish knee arthroplasty register (SKAR) during 2007–2008 and 2012–2013 were included. Matched data on antibiotic prescriptions were obtained from the Swedish Prescribed Drug Register (SPDR). All patients with ≥28 days of continuous antibiotic treatment within 2 years of primary surgery had their medical charts reviewed to identify cases of PJI. Results. 644 PJIs were identified, equaling a 2-year cumulative incidence rate of 1.42% (95% CI: 1.31–1.53). The incidence rate was 1.41% before PRISS and 1.43% after. Diagnosis was made within 30 days of primary TKA in 52%, and within 90 days in 73% of the cases. 603 cases were reoperated. Debridement with exchange of the insert was performed in 32.1% and 62.5% of cases before and after PRISS respectively. Conclusions. No reduction in cumulative PJI incidence was seen after the PRISS initiative

Computer navigation in total knee arthroplasty (TKA) has proven to significantly reduce the number of outliers in prosthesis positioning and to improve mechanical leg alignment. Despite these advantages the acceptance of navigation technologies is still low among orthopaedic surgeons. The time required for navigation might be a reason for the low acceptance. The aim of the study was to test whether software and instrument improvements made in an established navigation system could lead to a significant navigation acquisition time reduction. An improved and the current version of the TKA navigation software were used to perform surgery trials on a human cadaveric specimen by two experienced orthopaedic surgeons. A significant effect of the “procedure” (navigation software version) on the navigation time (p< 0.001) was found, whereas the difference between surgeons was not significant (p= 0.2). There was no significant interaction between surgeon and navigation software version (p= 0.5). The improved version led to a significant navigation acquisition time reduction of 28%. Software and instrument improvements led to a statistically significant navigation acquisition time reduction. The achieved navigation acquisition time decrease was independent from surgeon. Specific instrument and software improvements in established navigation systems may significantly decrease the surgery time segments where navigation takes place. However, the total navigation acquisition time is low in comparison to the total surgery time

We report a rare case of Hip Resurfacing dislocation three years after a bilateral Hip Resurfacing in a very strong patient and show the maneuver to do a closed reduction on a film done at the surgical theatre under general anesthesia. Hip resurfacing dislocation is a very rare entity described in the literature and more rare after three years. With conventional total hip replacement the dislocation rate is 2–5%. In the international literature the dislocation rate with resurfacing is 0.21%. We describe a case of a 47 years old male patient who was submitted to a biltateral 54 × 60 mm Hip Resurfacing in November 16 th and 18th, 2011 (two separate days). He had a normal post op and returned to his work after six weeks and recreational activities after four months. Three years later, on November 8th, 2014 he did an extreme movement of hip flexion, adduction and internal rotation when he was gardening and planting a tree seedling suffering a left hip dislocation. Hopefully we could reduce the dislocated hip in a closed manner in the following morning. Patient went home next day but on that same night had important abominal pain needing to return to hospital when numerous gallbladder stones where found being submitted to a total laparoscopic colecistectomy two days later. It was really a bad luck week. Metal ions are still normal and patient is symptomless until today having returned to his recreational activities. We will show in a movie the maneuver to do this closed reduction and hope by showing this maneuver that our colleagues do not have to do an open dislocation in the future in case they face a Hip Resurfacing dislocation

Method. The anteroposterior pelvic radiographs of 84 children (87 hips with developmental dysplasia) seen between 1995 and 2004 were reviewed retrospectively. Each radiograph was photographed digitally and converted to the negative using Microsoft Photo Editor. Arthrograms were also assessed at the time of femoral head reduction. The acetabular index (AI) and femoral head deformity were assessed. Acetabular response was measured using the AI at 6 and 12 months post-reduction. Results. Mean age at presentation was 11 months for the closed reduction group, versus 19 months for those with an arthrographic soft tissue obstruction requiring open reduction. Additionally, the average age of the children that underwent open reduction who later required a Salter osteotomy was 27 ± 3 months compared to an average of 14 ± 1.5 months for those who did not. The acetabular response was maximal during the first 6 months following treatment. Closed reduction (24 hips) gave comparable results to open reduction (63 hips), although the initial AI was greater in those requiring open reduction (39.5 ± 6.3° versus 36.1 ± 4.6°). Using two separate Bonferroni pairwise comparisons revealed no statistical difference in response between closed and open reduction. Arthrography revealed that hips requiring open reduction were more deformed, with spherical femoral heads in 29% as opposed to 68% in the closed reduction group. The AI was also slightly less (36.6 ± 3.2°) when the femoral head was spherical in comparison to those hips with an aspherical femoral head (38.0 ± 6.6°). Conclusion. Age at presentation and femoral head deformity therefore influence the outcome of reduction, but the acetabular index improves to a similar degree whether closed or open reduction is required

Introduction. During revision surgery, the active electrode of an electrocautery device may get close to the implant, potentially provoking a flashover. Incidents have been reported, where in situ retained hip stems failed after isolated cup revision. Different sizes of discoloured areas, probably induced by electrocautery contact, were found at the starting point of the fracture. The effect of the flashover on the implant material is yet not fully understood. The aim of this study was to investigate the fatigue strength reduction of Ti-6Al-4V titanium alloy after electrocautery contact. Material and Methods. 16 titanium rods (Ti-6Al-4V, extra low interstitial elements, according to DIN 17851, ⊘ 5 mm, 120 mm length) were stress-relief annealed (normal atmosphere, holding temperature 622 °C, holding time 2 h) and cooled in air. An implant specific surface roughness was achieved by chemical and electrolytic polishing (Ra = 0.307, Rz = 1.910). Dry (n = 6) and wet (n = 6, 5 µl phosphate buffered saline) flashovers were applied with a hand-held electrode of a high-frequency generator (Aesculap AG, GN 640, monopolar cut mode, output power 300 W, modelled patient resistance 500 Ω). The size of the generated discoloured area on the rod's surface - representative for the heat affected zone (HAZ) - was determined using laser microscopy (VK-150x, Keyence, Japan). Rods without flashover (n = 4) served as control. The fatigue strength of the rods was determined under dynamic (10 Hz, load ratio R = 0.1), force-controlled four-point bending (FGB Steinbach GmbH, Germany) with swelling load (numerical bending stress 852 MPa with a bending moment of 17.8 Nm) until failure of the rods. The applied bending stress was estimated using a finite-element-model of a hip stem during stumbling. Metallurgical cuts were made to analyse the microstructure. Results. The control rods failed at the pushers of the setup (median: 94,550, range: 194,000 cycles). The rods with flashover failed directly at the HAZ significantly earlier than the control rods (p = 0.018). The analysis of the microstructure showed a transformation of the equiaxed α+β microstructure to a bimodal state. The size of the HAZs were equal for the dry (median: 1.51 mm. 2. , range: 5.68 mm. 2. ) and wet flashovers (median: 0.92 mm. 2. , range: 2.50 mm. 2. , p = 0.792). The cycles to failure were smaller for the dry flashover (median: 22,650 cycles, range: 5,700) than the wet flashover but not reaching statistical significance (median: 32,200, range: 57,900; p = 0.052). No correlation between the dimension of the HAZs and the cycles to failure was found (dry: r. 2. = 0.019, p = 0.8; wet: r. 2. = 0.015, p = 0.721). Discussion. Flashovers induced by an electrocautery device reduce the fatigue strength of Ti-6Al-4V. Since no correlation between the size of the HAZs and the cycles to failure was found, every contact between electrocautery devices and metal implants should be avoided. For any figures or tables, please contact authors directly

Acute Hill-Sachs (HS) reduction represents a potential alternative method to remplissage for the treatment of an engaging HS lesion. The purpose of this study is to biomechanically compare the stabilising effects of a acute HS reduction technique and remplissage in a complex instability model. This was a comparative cadaveric study of 6 shoulders. For the acute HS lesion, a unique model was used to create a 30% defect, compressing the subchondral bone while preserving the articular surface in a more anatomic fashion. In addition, a 15% glenoid defect was made in all specimens. The HS lesion was reduced through a lateral cortical window with a bone tamp, and the subchondral void was filled with Quickset (Arthrex) bone cement to prevent plastic deformation. Five scenarios were tested; intact specimen, bipolar lesion, Bankart repair, remplissage with Bankart repair and HS reduction technique with Bankart repair. Translation, kinematics and dislocation events were recorded. For all 6 specimens no dislocations occurred after either remplissage or the reduction technique. At 90 degrees of abduction and external rotation (ABER), anterior-inferior translation was 11.1 mm (SD 0.9) for the bipolar lesion. This was significantly reduced following both remplissage (5.1±0.7mm; p<0.001) and HS reduction (4.4±0.3mm; p<0.001). For anterior-inferior translation there was no significant difference in translation between the reduction technique and remplissage (p=0.91). At 90 degrees of ABER, the intact specimens average joint stiffness was 7.0±1.0N/mm, which was not significantly different from the remplissage (7.8±0.9 N/mm; p=0.9) and reduction technique (9.1±0.6 N/mm; p=0.50). Compared with an isolated Bankart repair, the average external rotation loss after also performing a remplissage procedure was 4.3±3.5 deg (p=0.65), while average ER loss following HS reduction was 1.1±3.3 deg (p=0.99). There was no significant difference in external rotation between remplissage and the reduction technique (p=0.83). Similar joint stability was conferred following both procedures, though remplissage had 3.2-degree loss of ER in comparison. While not statistically significant, even slight ER loss may be clinically detrimental in overhead athletes. Overall, the acute reduction technique is a more anatomic alternative to the remplissage procedure with similar ability to prevent dislocation in a biomechanical model, making it a viable treatment option for engaging Hill-Sachs lesions

Aim. Prosthetic joint infection (PJI) is a major complication in THA. Nasal carriage with S. Aureus is a well-defined risk factor for infection in hospitalized patients. Risk for infection is reduced up to 50% by eradication therapy. Since PJI rates are very low and only 25% of the population are carriers, significant differences are hard to show and reports on PJI have been inconclusive. We analysed the effect of S. Aureus eradication therapy in THA. Methods. From 2011, patients receiving THA are screened for S. Aureus carriage and carriers are treated. This group was retrospectively compared with a historical THA group in which no screening and eradication therapy was done. We assumed similar carrier rates in both groups and calculated the risk reduction of eradication therapy for PJI in comparison to the historical carriers without treatment. Fisher's Exact test was used to compare outcome. Results. 2072 patients were screened and 478 patients were positive (23%). The historical control group consisted of 1248 patients, with 288 calculated carriers (23%). 15 PJI (0.72%) occurred vs 14 (1.12%) in the historical group (p=0.16). A 52% reduction in S. Aureus infections was found (0.33% vs 0.64% p=0.15). Infection rates for PJI caused by S. aureus was similar in non-carriers and carriers after eradication therapy (0.3 vs 0.4% p=0.506). The calculated infection rates in carriers in the historical group was reduced from 2.6% to 0.8% (RR 3,25, p=0.07) by eradication therapy and from 1.7% to 0,4% (RR 4,25, p=0.07) for S. Aureus PJI. Conclusions. A clear trend in reduction of PJI was demonstrated as a result of S. aureus screening and eradication therapy, reducing the rate of PJI for carriers to the same level as non-carriers

Introduction. Tibial component malrotation is one of the commonest causes of pain and stiffness following total knee arthroplasties, however, the assessment of tibial component malrotation on imaging is not a clear-cut. Aim. The objective of this study was to assess tibial component rotation in cases with pain following total knee replacement using MRI with metal artifact reduction technique. Methods. In 35 consecutive patients presented to our clinic between January 2016 and April 2017 with persistent unexplained moderate to severe pain for at least 6 months following total knee arthroplasties after exclusion of infection, MRI evaluation of tibial component rotation using O-MAR technique-(Metal Artifact Reduction for Orthopedic implants) to improve visualization of soft tissue and bone by reducing artifacts caused by metal implants- was done according to the technique of Berger et al. Results. 25 cases showed internal rotation of tibial component, 5 cases showed neutral rotation, 5 cases showed external rotation with presence of abnormal intraarticular fibrous bands. Conclusion. Two main conclusions are obtained from this study:. Firstly: Internal rotation of tibial component must be excluded in all cases of persistent pain following total knee replacement. Secondly: Magnetic resonance imaging with the newly developed metal artifact reduction techniques is a very useful tool in evaluating cases of unexplained pain following total knee replacement